SEARCH · Search USGS

Results for “Stratigraphy”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2Linked to original sources

USGS2009

Regional Stratigraphy and Petroleum Systems of the Illinois Basin, U.S.A.

The publication combines data on Paleozoic and Mesozoic stratigraphy and petroleum geology of the Illinois basin, U.S.A., in order to facilitate visualizing the stratigraphy on a regional scale and visualizing stratigraphic relations within the basin. Data are presented in eight schematic chronostratigraphic sections arranged approximately from north to south, with time denoted in equal increments along the sections, in addition to the areal extent of this structural basin. The stratigraphic data are modified from Hass (1956), Conant and Swanson (1961), Wilman and others (1975), American Association of Petroleum Geologists (1984, 1986), Olive and McDowell (1986), Shaver and others (1986), Thompson (1986), Mancini and others (1996), and Harrison and Litwin (1997). The time scale is taken from Gradstein and others (2004). Additional stratigraphic nomenclature is from Harland and others (1990), Babcock and others (2007), and Bergstrom and others (2008). Stratigraphic sequences as defined by Sloss (1963, 1988) and Wheeler (1963) also are included, as well as the locations of major petroleum source rocks and major petroleum plays. The stratigraphic units shown are colored according to predominant lithology, in order to emphasize general lithologic patterns and to provide a broad overview of the Illinois basin. For the purpose of comparison, three columns on the right show schematic depictions of stratigraphy and interpreted events in the Illinois basin and in the adjacent Michigan and Appalachian basins.

Scientific Investigations Map↗

USGS2007

Eo-Ulrichian to Neo-Ulrichian views: The renaissance of "layer-cake stratigraphy"

Classical notions of "layer-cake stratigraphy" have been denigrated as representing an antiquated "Neptunian" view of the geologic record with the American paleontologist-stratigrapher E.O. Ulrich vilified as its quintessential advocate. Some of the extreme "layer-cake" interpretations of E.O. Ulrich are demonstrably incorrect, especially where applied in marginal marine and terrestrial settings. However, close scrutiny of Ulrich's work suggests that the bulk was correct and demonstrated considerable insight for the time. Subsequent development of facies concepts revolutionized geologists' view of time-space relationships in stratigraphy, but rather than focusing on facies patterns within the established stratigraphic (layer-cake) frameworks many geologists in North America came to view strata as parts of diachronous facies mosaics. Recent advances in the development of event and sequence stratigraphic paradigms are beginning to swing the pendulum back the other way. Possible causes of "layer-cake" patterns are numerous and varied, including: (1) parallelism of depositional strike and outcrop belts, especially in foreland basins, (2) very widespread environmental belts developed in low-relief cratonic areas, (3) time-averaging homogenizes facies to a limited extent, resulting in a very subtle signature of lateral change, (4) condensed beds (hardgrounds, bone beds, ironstones, etc.) often form in responses to extrabasinal forces, thus they cross-cut facies, and (5) large events (i.e. hurricanes, floods, tsunamis, eruptions, etc.) are "over represented" in the rock record. A revised ("Neo-Ulrichian") layer-cake paradigm carries many of the original correct empirical observations of pattern, noted by Ulrich, recast in terms of event and sequence stratigraphy.

Conference Paper↗

USGS2023

Assessing snowpack stratigraphy accuracy based on different input data: Insights for operations avalanche forecasting

Avalanche forecasters and snow scientists use physically based snow stratigraphy models to fill spatial and temporal gaps in field-based snow profile observations. These models generate stratigraphy predictions using meteorological input from automated weather stations (AWS) or numerical weather prediction (NWP) models. The choice of input data is often determined by data availability or convenience instead of giving full consideration to the most appropriate source for a particular application. For example, while AWS may provide weather observations that better represent a particular site, they have large up-front costs and require specialized personnel to service and maintain. The goal of this study is to quantify the accuracy of snow stratigraphy produced by the SNOWPACK model driven by different input data, with a particular focus on cost-benefit analysis for operational avalanche forecasting. We generate modeled snow profiles at a field site in the Bridger Range of southwestern Montana, USA, using a) observations from an AWS at the field site and b) NWP output from the NOAA High-Resolution Rapid Refresh (HRRR) model. Validation data consist of a season-long time series of 10 manual snow profiles. We use dynamic time-warping (DTW) to quantify the overall and grain-type categorized similarities between modeled and in-situ observed profiles that are collocated in time and in space. Based on the similarity results, we present a cost-benefit analysis that considers the cost of installing and maintaining an AWS alongside the improved representation of snow depth, grain size, and weak layer types.

Montana↗

USGS1996

Introduction: Paleozoic applications of sequence stratigraphy

Despite conceptual origins from studies of the Paleozoic strata of cratonic basins, sequence stratigraphy has largely been developed and applied to post-Paleozoic successions in extracratonic settings. The application of continental-margin sequence stratigraphic concepts to cratonic basinal successions is fraught with problems owing to slower rates of sediment accumulation, and consequently, a more coarsely defined temporal resolution. In addition, some important sequence stratigraphic components are rare or completely missing from cratonic areas. Common usage of genetic sequence stratigraphic terminology can coopt critical evaluation of depositional characters, and must be practiced with extreme caution in order to avoid 'model-driven' approaches to stratigraphic synthesis. The best available tests for evaluating current questions regarding the central role of eustasy in sequence stratigraphy may be through interregional and intercontinental comparisons of cratonic stratigraphic sequences.

Paleozoic sequence stratigraphy: views from the No↗

USGS2016

Stratigraphy of the north polar layered deposits of Mars from high-resolution topography

The stratigraphy of the layered deposits of the polar regions of Mars is theorized to contain a record of recent climate change linked to insolation changes driven by variations in the planet's orbital and rotational parameters. In order to confidently link stratigraphic signals to insolation periodicities, a description of the stratigraphy is required based on quantities that directly relate to intrinsic properties of the layers. We use stereo Digital Terrain Models (DTMs) from the High Resolution Imaging Science Experiment (HiRISE) to derive a characteristic of North Polar Layered Deposits (NPLD) strata that can be correlated over large distances: the topographic protrusion of layers exposed in troughs, which is a proxy for the layers’ resistance to erosion. Using a combination of image analysis and a signal-matching algorithm to correlate continuous depth-protrusion signals taken from DTMs at different locations, we construct a stratigraphic column that describes the upper ~500 m of at least 7% of the area of the NPLD, and find accumulation rates that vary by factors of up to two. We find that, when coupled with observations of exposed layers in orbital images, the topographic expression of the strata is consistently continuous through large distances in the top 300 – 500 m of the NPLD, suggesting it is better related to intrinsic layer properties than brightness alone.

Journal of Geophysical Research E: Planets↗

USGS2009

Continental margin sedimentation: From sediment transport to sequence stratigraphy

This volume on continental margin sedimentation brings together an expert editorial and contributor team to create a state-of-the-art resource. Taking a global perspective, the book spans a range of timescales and content, ranging from how oceans transport particles, to how thick rock sequences are formed on continental margins. - Summarizes and integrates our understanding of sedimentary processes and strata associated with fluvial dispersal systems on continental shelves and slopes - Explores timescales ranging from particle transport at one extreme, to deep burial at the other - Insights are presented for margins in general, and with focus on a tectonically active margin (northern California) and a passive margin (New Jersey), enabling detailed examination of the intricate relationships between a wide suite of sedimentary processes and their preserved stratigraphy - Includes observational studies which document the processes and strata found on particular margins, in addition to numerical models and laboratory experimentation, which provide a quantitative basis for extrapolation in time and space of insights about continental-margin sedimentation - Provides a research resource for scientists studying modern and ancient margins, and an educational text for advanced students in sedimentology and stratigraphy

Book↗

USGS2022

Effects of structure and volcanic stratigraphy on groundwater and surface water flow: Hat Creek basin, California, USA

Hydrogeologic systems in the southern Cascade Range in California (USA) develop in volcanic rocks where morphology, stratigraphy, extensional structures, and attendant basin geometry play a central role in groundwater flow paths, groundwater/surface-water interactions, and spring discharge locations. High-volume springs (greater than 3 m 3 /s) flow from basin-filling (<800 ka) volcanic rocks in the Hat Creek and Fall River tributaries and contribute approximately half of the average annual flow of the Pit River, the largest tributary to Shasta Lake. A hydrogeologic conceptual framework is constructed for the Hat Creek basin combining new geologic mapping, water-well lithologic logs, a database of active faults, LiDAR mapping of faults and volcanic landforms, streamflow measurements and airborne thermal infrared remote sensing of stream temperature. These data are used to integrate the geologic structure and the volcanic and volcaniclastic stratigraphy to create a three-dimensional interpretation of the hydrogeology in the basin. Two large streamflow gains from focused groundwater discharge near Big Spring and north of Sugarloaf Peak result from geologic barriers that restrict lateral groundwater flow and force water into Hat Creek. The inferred groundwater-flow barriers divide the aquifer system into at least three leaky compartments. The two downstream compartments lose streamflow in the upstream reaches (immediately downstream of the groundwater-flow barriers) and gain in downstream reaches with the greatest inflows immediately upstream of the barriers.

California↗

USGS1992

Geochronology and subsurface stratigraphy of Pukapuka and Rakahanga atolls, Cook Islands: Late Quaternary reef growth and sea level history

Eustatic sea-level cycles superposed on thermal subsidence of an atoll produce layers of high sea-level reefs separated by erosional unconformities. Coral samples from these reefs from cores drilled to 50 m beneath the lagoons of Pukapuka and Rakahanga atolls, northern Cook Islands give electron spin resonance (ESR) and U-series ages ranging from the Holocene to 600,000 yr B.P. Subgroups of these ages and the stratigraphic position of their bounding unconformities define at least 5 periods of reef growth and high sea-level (0–9000 yr B.P., 125,000–180,000 yr B.P., 180,000–230,000 yr B.P., 300,000–460,000 yr B.P., 460,000–650,000 yr B.P.). Only two ages fall within error of the last interglacial high sea-level stand (∼125,000–135,000 yr B.P.). This paucity of ages may result from extensive erosion of the last intergracial reef. In addition, post-depositional isotope exchange may have altered the time ages of three coral samples to apparent ages that fall within glacial stage 6. For the record to be preserved, vertical accretion during rising sea-level must compensate for surface lowering from erosion during sea-level lowstands and subsidence of the atoll; erosion rates (6–63 cm/1000 yr) can therefore be calculated from reef accretion rates (100–400 cm/1000 yr), subsidence rates (2–6 cm/1000 yr), and the duration of island submergence (8–15% of the last 600,000 yr). The stratigraphy of coral ages indicates island subsidence rates of 4.5 ± 2.8 cm/1000 yr for both islands. A model of reef growth and erosion based on the stratigraphy of the Cook Islands atolls suggests average subsidence and erosion rates of between 3–6 and 15–20 cm/1000 yr, respectively.

Palaeogeography, Palaeoclimatology, Palaeoecology↗

USGS2005

Glacially-influenced late Pleistocene stratigraphy of a passive margin: New Jersey's Record of the North American ice sheet

Glacial isostasy and the sediment supply changes associated with the waxing and waning of ice sheets have dramatic effects on the stratigraphy of adjacent continental shelves. In ancient stratigraphic records, the glacial influences on such deposits could be difficult to recognize because of the removal of coeval terrestrial glacial deposits by erosion. This study illustrates the effects of the Laurentide Ice Sheet on a basin near its maximum limit, the New Jersey continental shelf. Analysis of 1600 km of Geopulse???, Uniboom???, Minisparker??? and airgun profiles reveals four depositional sequences that have a maximum thickness of ???75 m near the shelf edge. Sequences I and IV correspond to the major glacial-interglacial sea level changes at Marine Isotope Chron (MIC) 6/5e and 2/1, whereas sequences II and III reflect smaller-scale sea-level fluctuations during chrons 4/3c and 3b/3a, respectively. Sequences I and IV are characterized by relatively thick low stand to early transgressive deposits near the shelf edge formed during times of increased sediment supply, but are thin and discontinuous across much of the shelf. Reflection horizons in these units deepen northward in the northern half of the study area due to collapse of a peripheral bulge that formed at the margin of the Laurentide Ice Sheet. The Hudson River moved from a more southerly drainage pattern to the modern Hudson Shelf Valley position, possibly under the influence of the advancing peripheral bulge. Sequences II and III are largely preserved within a broad mid-shelf swale likely created by the migration of an ancestral Hudson River, and their thickness implies much higher sedimentation rates during chrons 4 and 3 than seen today. If the terrestrial glacial record was eroded, the increased rates of sedimentation during the Pleistocene, dominance of sediments derived from northern New England, and northward tilting of strata could be interpreted as a result of uplift of a northern source area. The unusually high frequency of the relative sea-level oscillations (20 kyr), the concentration of sediment supply during low stands and early transgressions, and the correspondence of sea-level change with climatic change could be used to infer their relationship to a nearby ice sheet. Geologists studying deposits formed during times of widespread continental glaciation should consider possible glacial influences on the stratigraphy of mid-latitude deposits, even in the absence of sediments directly deposited by ice. ?? 2005 Elsevier B.V. All rights reserved.

Marine Geology↗

USGS2006

Acoustic stratigraphy of Bear Lake, Utah-Idaho: late Quaternary sedimentation patterns in a simple half-graben

A 277-km network of high-resolution seismic-reflection profiles, supplemented with a sidescan-sonar mosaic of the lake floor, was collected in Bear Lake, Utah–Idaho, in order to explore the sedimentary framework of the lake's paleoclimate record. The acoustic stratigraphy is tied to a 120 m deep, continuously cored drill hole in the lake. Based on the age model for the drill core, the oldest continuously mapped acoustic reflector in the data set has an age of about 100 ka, although older sediments were locally imaged. The acoustic stratigraphy of the sediments below the lake indicates that the basin developed primarily as a simple half-graben, with a steep normal-fault margin on the east and a flexural margin on the west. As expected for a basin controlled by a listric master fault, seismic reflections steepen and diverge toward the fault, bounding eastward-thickening sediment wedges. Secondary normal faults west of the master fault were imaged beneath the lake and many of these faults show progressively increasing offset with depth and age. Several faults cut the youngest sediments in the lake as well as the modern lake floor. The relative simplicity of the sedimentary sequence is interrupted in the northwestern part of the basin by a unit that is interpreted as a large (4 × 10 km) paleodelta of the Bear River. The delta overlies a horizon with an age of about 97 ka, outcrops at the lake floor and is onlapped by much of the uppermost sequence of lake sediments. A feature interpreted as a wave-cut bench occurs in many places on the western side of the lake. The base of this bench occurs at a depth (22–24 m) similar to that (20–25 m) of the distal surface of the paleodelta. Pinch-outs of sedimentary units are common in relatively shallow water on the gentle western margin of the basin and little Holocene sediment has accumulated in water depths of less than 30 m. On the steep eastern margin of the basin, sediments commonly onlap the hanging wall of the East Bear Lake Fault. However, no major erosional or depositional features suggestive of shoreline processes were observed on acoustic profiles in water deeper than about 20–25 m.

Idaho, Utah↗

USGS2015

Conodonts, stratigraphy, and relative sea-level changes of the tribes hill formation (lower ordovician, east-central New York)

Tremadocian onlap is recorded by the Tribes Hill Formation. The formation is a lower Lower Ordovician (upper conodont Fauna B Interval(?)- Rossodus manitouensis Zone) depositional sequence that unconformably overlies the Upper Cambrian Little Falls Formation. Depositional environments and stratigraphy indicate that the Tribes Hill was deposited on a wave-, not tide-, dominated shelf and that a uniform, “layer-cake” stratigraphy is present. The deepening-shoaling sequence of the Tribes Hill includes the: 1) Sprakers Member (new; peritidal carbonate and overlying tempestite limestone and shale); 2) Van Wie Member (new; subtidal shale and limestone); 3) Wolf Hollow Member (revised; massive carbonates with thrombolitic cap); and 4) Canyon Road Member (new; glauconitic limestone and overlying evaporitic dolostone). The shoaling half-cycle of the Tribes Hill is older than a shoaling event in western Newfoundland, and suggests epeirogenic factors in earliest Ordovician sea-level change in east Laurentia. Conodont and trilobite biofacies track lithofacies, and Rossodus manitouensis Zone conodonts and Bellefontia Biofacies trilobites appear in the distal, middle Tribes Hill Formation. Twenty-four conodont species are illustrated. Ansella ? protoserrata new species, Iapetognathus sprakersi new species, Leukorhinion ambonodes new genus and species, and Laurentoscandodus new genus are described.

Journal of Paleontology↗

USGS2011

Regional-scale stratigraphy of surface units in Tyrrhena and Iapygia Terrae, Mars: Insights into highland crustal evolution and alteration history

The compositional, thermophysical and geologic characteristics of surface units in Iapygia and Tyrrhena Terra (60°E–100°E, 0°–30°S) provide new insights into the compositional stratigraphy of the region. Intercrater plains are dominated by two surface units. The older unit (unit 1) is deficient in olivine and more degraded and likely consists of a mixture of impact, volcanic and sedimentary materials. The younger unit (unit 2) is enriched in olivine, exhibits a resistant morphology and higher thermal inertia, and likely represents volcanic infilling of plains. Units 1 and 2 bear a strong resemblance to those previously mapped in Mare Serpentis, a section of highlands crust located northwest of Hellas Basin. Thus, the two major intercrater plains units are even more widespread than previously thought and therefore likely constitute important components of Mars' highland stratigraphy. Many craters in the region contain high thermal inertia deposits (unit 3) that are compositionally identical to unit 2. These may have formed via volcanic infilling or may represent sedimentary materials that have been eroded from crater walls and lithified. Less common units include olivine and/or pyroxene‐rich massifs and crater central peaks. These are primarily found within Hellas Basin rim units and may represent mantle materials brought toward the surface during the Hellas impact. Putative chloride deposits are primarily associated with olivine‐deficient surfaces (unit 1) that may be heavily degraded occurrences of unit 2. The observations raise a variety of questions related to Martian crustal evolution and alteration that may have more widespread implications outside the study region.

Journal of Geophysical Research - Planets↗

USGS1999

Late Cenozoic stratigraphy and tephrochronology of the western Black Mountains piedmont, Death Valley, California: Implications for the tectonic development of Death Valley

Geologic mapping combined with the tephrochronology of spatially isolated sedimentary sections along the western Black Mountains piedmont adjacent the Death Valley fault zone (DVFZ) improves the late Cenozoic stratigraphy from relative age to correlated age. Pliocene tephra layers identified in Funeral Formation conglomerates at Artist Drive and Copper Canyon include a “Nomlaki-like” tephra bed (ca. 3.4 Ma), the tuffs of Mesquite Spring (3.1–3.3 Ma), and a tuff of the lower Glass Mountain family (1.86–1.92 Ma). We informally name the early(?) to middle Pleistocene Mormon Point formation1, which contains tephra layers correlated with the upper Glass Mountain/Bishop family of tephra layers (0.76–1.2 Ma), the Lava Creek B ash bed (ca. 0.66 Ma), and the Dibekulewe ash bed (ca. 0.51 Ma). Identification of these tephra layers indicates that the maximum age of the overlying and inset lacustrine gravel and alluvial fan deposits is 0.51 Ma. The correlated age stratigraphy indicates that the dextral-oblique DVFZ has stepped basinward at Mormon Point and Copper Canyon since the late Pliocene. In contrast, during that same time the DVFZ at Artist Drive has not stepped basinward, but developed into a graben. The age of faulting on the low-angle (~19°–40°) Mormon Point turtleback fault is bracketed between 0.76 and 0.18 Ma, and the overlying Mormon Point formation shows no evidence of tilting, indicating slip on the turtleback fault was at a low-angle. Early Quaternary slip on the low-angle turtleback fault conflicts with the present versions of the pure shear, rolling-hinge, and detachment/rift models for Death Valley extension. Early Quaternary slip is most compatible with turtleback faults as folded or warped detachment fault. We propose that the warping is thermally driven and related to the Black Mountains igneous complex.

California, Nevada↗

USGS1946

Preliminary report on the stratigraphy and structure of the Kurupa, Colville, and Oolamnagavik Rivers, Alaska

U. S. Geological Survey Party No. 4 covered the area between 68° 30' and 69° 08' N. latitude and between 154° and 155°20' W. longitude during the period May 18 to September 2. Traverses were confined mainly to the valleys of the Kurupa, Colville, and Oolamnagavik Rivers inasmuch as very little rock is exposed in the interstream areas. This report is limited to the Colville River valley area between the Kura and Killik Rivers, and to a stratigraphic section exposed. on the Kurupa 7-12 miles south of the Colville. A final report will be prepared by April 1, 1947, on the total area and will include discussions of the stratigraphy and structure of Upper Cretaceous formations A through D on the Oolamnagavik and Kurupa, the stratigraphy of Formation D on the Colville, and the Lower Cretaceous and Triassic rocks. Separation and identification of heavy minerals from the sandstones and conglomerates, binocular and petrographic microscope examinations of specimens, identification of megafossils, and separation and identification of microfossils, if any, will be undertaken. Detailed examination of all aerial photos will be made to trace out structures and formations in the adjacent areas to the east, north, and west. It seems probable that close correlation between this area, the Killik River area, and Maybe Creek area will be possible by extrapolating field and aerial photo data. It is possible also to trace structures and some formation westward from the Kurupa River.

Alaska↗

USGS2009

Preliminary Physical Stratigraphy and Geophysical Data From the USGS Dixon Core, Onslow County, North Carolina

In October through November 2006, scientists from the U. S. Geological Survey (USGS) Eastern Region Earth Surface Processes Team (EESPT) and the Raleigh (N.C.) Water Science Center (WSC), in cooperation with the North Carolina Geological Survey (NCGS) and the Onslow County Water and Sewer Authority (ONWASA), drilled a stratigraphic test hole and well in Onslow County, N.C. The Dixon corehole was cored on ONWASA water utility property north of the town of Dixon, N.C., in the Sneads Ferry 7.5-minute quadrangle at latitude 34deg33'35' N, longitude 77deg26'54' W (decimal degrees 34.559722 and -77.448333). The site elevation is 66.0 feet (ft) above mean sea level as determined using a Paulin precision altimeter. The corehole attained a total depth of 1,010 ft and was continuously cored by the USGS EESPT drilling crew. A groundwater monitoring well was installed in the screened interval between 234 and 254 ft below land surface. The section cored at this site includes Upper Cretaceous, Paleogene, and Neogene sediments. The Dixon core is stored at the NCGS Coastal Plain core storage facility in Raleigh. The Dixon corehole is the fourth and last in a series of planned North Carolina benchmark coreholes drilled by the USGS Coastal Carolina Project. These coreholes explore the physical stratigraphy, facies, and thickness of Cretaceous, Paleogene, and Neogene Coastal Plain sediments in North Carolina. Correlations of lithologies, facies, and sequence stratigraphy can be made with the Hope Plantation corehole, N.C., near Windsor in Bertie County (Weems and others, 2007); the Elizabethtown corehole, near Elizabethtown, N.C., in Bladen County (Self-Trail and others, 2004b); the Smith Elementary School corehole, near Cove City, N.C., in Craven County (Harris and Self-Trail, 2006; Crocetti, 2007); the Kure Beach corehole, near Wilmington, N.C., in New Hanover County (Self-Trail and others, 2004a); the Esso#1, Esso #2, Mobil #1, and Mobil #2 cores in Albermarle and Pamlico Sounds, N.C. (Zarra, 1989); and the Cape Fear River outcrops in Bladen County, N.C. (Farrell, 1998; Farrell and others, 2001). This report contains the lithostratigraphic summary recorded at the drill site, core photographs, geophysical data, and calcareous nannofossil biostratigraphic correlations.

Open-File Report↗

USGS2011

The shallow stratigraphy and sand resources offshore of the Mississippi Barrier Islands

Coastal Mississippi is protected by a series of barrier islands ranging in length from 10-25 kilometers that are less than 2 kilometers wide. The majority of these islands comprise the Gulf Islands National Seashore (GUIS), an ecologically diverse shoreline that provides habitat for wildlife including migratory birds and endangered animals. The majority of GUIS is submerged, and aquatic environments include dynamic tidal inlets, ebb-tide deltas, and seagrass beds. The islands are in a state of decline, with land areas severely reduced during the past century by storms, sea-level rise, and human alteration. Morton (2008) estimates that since the mid-1800s up to 64 percent of island surface area has been lost. Heavy damage was inflicted in 2005 by Hurricane Katrina, which passed by as a Category 3 storm and battered the islands with winds of more than 160 kilometers per hour and a storm surge up to 9 meters. Since 2007, the U.S. Geological Survey (USGS), in collaboration with the National Park Service, has been mapping the seafloor and substrate around the islands as part of the USGS Northern Gulf of Mexico Ecosystem Change and Hazard Susceptibility project. The purpose of these investigations is to characterize the near-surface stratigraphy and identify the influence it may have on island evolution and fate. In 2009, this effort provided the basis for a collaborative effort with the U.S. Army Corps of Engineers (USACE) to expand the investigation outside of GUIS boundaries as part of the Mississippi Coastal Improvement Project (MsCIP). The MsCIP program consists of structural, nonstructural, and environmental project elements to restore portions of coastal Mississippi and GUIS affected by storm impact. The project includes the placement of sand along the islands, both on the present beaches and within the littoral zone, to mitigate shoreline erosion and breaching. This action requires the location and assessment of offshore sand or sediment deposits that can provide suitable material for shoreline renourishment. The geophysical and sample information collected by the USGS during geologic investigations provides this information. As part of the MsCIP program, in March 2010 the USGS mapped approximately 300 square kilometers of seafloor around GUIS. Interferometric swath bathymetry, sidescan sonar, and Chirp sub-bottom profiling were used to characterize seafloor elevations, texture, and the underlying stratigraphy. On the basis of this information, potential sediment resources were identified. The most promising offshore deposits for beach restoration include shoals, lowstand valley fill, tidal delta deposits, abandoned barrier deposits, and dredge spoil. Of these, lowstand valley fill deposits and dredge spoil are less desirable; lowstand deposits are buried under a 2- to 4-meter blanket of mud, and dredge spoil volume is small. A relict tidal delta and submerged shoals are the most desirable deposits; the tidal delta contains a large volume of material still exposed on the seafloor, and parts of submerged shoals have modest volume and thin mud cover.

Mississippi↗

USGS1997

Geophysical database of the east coast of the United States; southern Atlantic margin, stratigraphy and velocity in map grids

In 1990, the Naval Oceanographic Office and the U.S. Geological Survey agreed to develop a digital data base of stratigraphy and acoustic properties of sediments along the U.S. East Coast of the United States. The objective of this work was to utilize more than 25,000 km of publicly available multichannel seismic-reflection profiles (Sheridan et al., 1988) in order to assign acoustic properties to the continental margin postrift sediments in an internally consistent, geologically meaningful, regionally extensive, digital form. The acoustic properties of interest include thickness, depth, compressional- and shear-wave velocity, compressional- and shear-wave attenuation, density, and lithology. This data base subdivides the 0- to 14-km thick Jurassic and younger postrift deposits into 18 mappable horizons. The spatial scale of gridding is 5' latitude by 5 ' longitude, or about 9x8 km. This report describes the second part of developing the data base for the continental margin between Florida and Cape Hatteras: spatial gridding of the digital stratigraphic and velocity data, derivative calculations of density, shear-wave velocity, and attenuation, and construction of the final data base. The first report (Hutchinson et al., 1995) describes how the stratigraphy and velocity were digitized from the original profiles. Complementary reports that describe the data base for the area between Cape Hatteras and Georges Bank are given in Klitgord and Schneider (1994) and Klitgord et al. (1994).

Open-File Report↗

USGS1999

Lithostratigraphy, geophysics, biostratigraphy, and strontium-isotope stratigraphy of the surficial aquifer system of eastern Collier County and northern Monroe County, Florida

In 1997, ten cores were drilled in eastern Collier County and northern Monroe County, within the limits of the Big Cypress National Preserve. These cores represent a continuation of the study of seven cores in western Collier County begun in 1996 and reported in Weedman and others (1997) and Edwards and others (1998). This joint U.S. Geological Survey and Florida Geological Survey project is designed to acquire subsurface geologic and hydrologic data in southwest Florida to extend current ground-water models, thereby expanding the utility of these models for land and water management. In this report we describe the lithostratigraphy, geophysical logging, sedimentological analysis, dinocyst biostratigraphy, and strontium-isotope stratigraphy of these ten cores. The three geophysical logs (natural gamma-ray, induction conductivity, and neutron porosity) assumed to be related to formation lithology and water quality show that a number of clay-rich zones are present in all of the boreholes, and that pore-water conductivity increases with depth. The clay-rich zones are confirmed by visual examination of core material and sedimentological analysis. The relative transmissivity calculated at 10-foot-thick intervals shows that in six of the boreholes, high values are associated with the shallow aquifer in the 0-40 ft interval. Two of the boreholes (the most northerly and the most easterly) showed relatively higher values of transmissivity in permeable zones at or somewhat below 100 ft in depth. Core geology and logs indicate that the deeper aquifers are not more permeable than similar deeper zones in the other boreholes, but rather that the shallow aquifer appears to be less permeable in these two coreholes. The Arcadia (?) Formation was only penetrated in the deepest core where it is late Miocene in age. The Peace River Formation was penetrated in all but the two westernmost cores. It yields a late Miocene age, based on both dinocysts and strontium-isotope stratigraphy. The top is an irregular surface. Age and stratigraphic relations suggest that the upper part of the Peace River and lower part of the unnamed formation are at least partially equivalent laterally. The unnamed formation was recovered in every core. It is thinnest in the northernmost core and thickest to the west. Ages calculated from strontium isotopes range from 6.9 to 4.6 million years ago (late Miocene to early Pliocene). The top of the unnamed formation is deepest to the north and it becomes shallower to the southwest. The Tamiami Formation also was recovered in every core and consistently yields early Pliocene ages; it yields late Pliocene ages near the top in two cores. The age and lateral relations strongly suggest that the lower part of the Tamiami Formation and the upper part of the unnamed formation are lateral facies of each other. The Fort Thompson (?) Formation, Miami Limestone, and undifferentiated siliciclastic sediments and limestone at the very top of the cores were not dated.

Florida↗