Search USGS⌕ Search

SEARCH · Search USGS

Results for “Special Publications”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2Linked to original sources
USGS1987

Unconformity between Coast Range ophiolite and part of the lower Great Valley sequence, South Fork of Elder Creek, Tehama County, California

The South Fork of Elder Creek is located on private property about 6 mi (10 km) northwest of Paskenta, Calif. (Fig. 1). To visit this locality it is necessary to call Mr. Les Sutfin (916-824-4628) and arrange to pick up the key to the gate at his home in Corning. From the Paskenta Store, drive 3.3 mi (5.3 km) north on the Toomes Camp road to the locked gate on the north side of the road. From here, take the Pellows Road (four-wheel drive vehicle recommended) 3.6 mi (5 km) north to the end of the road, then walk west along the trail parallel to the South Fork of Elder Creek for approximately 0.5 mi (0.8 km) to the unconformity(Fig. 2).

DNAG Special Publication↗
USGS1991

Faulting and seismic activity

This chapter traces some of the ideas and concepts leading to the current understanding of the process of faulting and earthquake generation, gives examples of engineering geology investigations contributing to that understanding, describes some engineering projects that have been strongly influenced by the process, and suggests needed research. Each of these topics is discussed in sequence. The understanding of faulting and earthquakes and of the significance of these to engineering has developed over several centuries. John Michell in 1761 was probably the first to publish a cross section of a clearly recognizable fault (Adams, 1938, Fig. 66). Michell did not attribute earthquakes to faulting, but proposed the important idea that seismic vibrations were the result of the propagation of elastic waves in the earth (Adams, 1938). Charles Lyell (1830) emphasized the uplift and depression of land that accompanies earthquakes. He did not attribute earthquakes to faulting, but a contemporary of his evidently did, for the following statement appeared in a review of Lyell’s book (Scrap, 1830, p. 463): The sudden fracture of solid strata by any disruptive force must necessarily produce a violent vibratory jar to a considerable distance along the continuation of these strata. Such vibrations would be propagated in undulations, which may be expected, when influencing a mass of rocks several thousand feet at least in thickness, to produce on the surface exactly the wave-like motion, the opening and shutting of crevices, the tumbling down of cliffs and walls, and other characteristic phenomena of earthquakes. This idea was apparently disregarded, and coseismic faulting, some of which reached the ground surface, was generally considered to be the result rather than the cause of earthquakes until the time of G. K. Gilbert.

DNAG Special Publication↗
USGS1982

Atlantic continental margin of the United States

The objective of this Decade of North American Geology (D-NAG) volume will be to focus on the Mesozoic and Cenozoic evolution of the U.S. Atlantic continental margin, including the onshore coastal plain, related onshore Triassic-Jurassic rift grabens, and the offshore basins and platforms. Following multiple compressional tectonic episodes between Africa and North America during the Paleozoic Era that formed the Appalachian Mountains, the Mesozoic and Cenozoic Eras were dominated by tensional tectonic processes that separated Africa and North America. Extensional rifting during Triassic and Early Jurassic times resulted in numerous tensional grabens both onshore and offshore, which filled with nonmarine continental red beds, lacustrine deposits, and volcanic flows and debris. The final stage of this breakup between Africa and North America occurred beneath the present outer continental shelf and continental slope during Early or Middle Jurassic time when sea-floor spreading began to form new oceanic crust and lithosophere between the two continents as they drifted apart. Postrift subsidence of the marginal basins continued in response to cooling of the lithosphere and sedimentary loading. Geophysical surveys and oil-exploration drilling along the U.S. Atlantic continental margin during the past 5 years are beginning to answer many questions concerning its deep structure and stratigraphy and how it evolved during the rifting and early sea-floor-spreading stages of the separation of this region from Africa. Earlier geophysical studies of the U.S. continental margin used marine refraction and submarine gravity measurements. Single-channel seismic-reflection, marine magnetic, aeromagnetic, and continuous gravity measurements became available during the 1960s.

DNAG Special Publication↗
USGS1982

Ancient plate boundaries in the Bering Sea region

Plate tectonic models of the Bering Sea suggest that the abyssal Bering Sea Basin is underlain by oceanic crust, a supposition supported by refraction and magnetic data. The oceanic crust is thought to be a remnant of the Kula(?) plate that was isolated within what is now the Bering Sea when the proto-Aleutian arc began to form between the Alaska Peninsula and Kamchatka in late Mesozoic or earliest Tertiary times. Prior to the formation of the Aleutian arc, the Kula(?) plate moved NW, directly underthrusting eastern Siberia; the plate’s eastern edge either obliquely underthrust or slid past the Bering Sea margin along a transform boundary. The Koryak Range in eastern Siberia is composed in part of mélange units that include Palaeozoic and Mesozoic allochthonous blocks juxtaposed within a matrix of Cretaceous sedimentary rocks. Structural trends suggest that these blocks were accreted into the Koryak area from the south along an ancient subduction zone formed by underthrusting of the Kula(?) plate. The base of the Bering Sea continental margin that extends from eastern Siberia to the Alaska Peninsula—the so-called Beringian margin—is underlain by a thick (7–10 km) sedimentary section along the base of the slope. Rocks dredged from the basement exposed farther up the slope (1500–2000 m deep) include shallow-water Upper Jurassic sandstone that is unconformably overlain by shallow-water Eocene to Miocene diatomaceous mudstone. Fauna in the dredge samples indicate that the shelf edge has subsided several kilometres since late Palaeogene time, perhaps in response to the cessation of motion relative to the adjacent oceanic plate and subsequent sediment loading of the oceanic plate. Uplift of the former plate boundary exposed in the Koryak Range occurred principally in late Cenozoic time, and collapse of the adjacent plate boundary, the Beringian margin, began in earliest Tertiary time and has continued to the present. Both tectonic events occurred after the site of active plate collision shifted south to near the present Aleutian Trench. We are uncertain as to why these two ancient, yet adjacent former plate boundaries should behave so differently, i.e. why one area was folded and uplifted while the other was extensionally deformed and subsided, both apparently in response to the cessation of convergent or strike-slip plate motion.

Geological Society, London, Special Publications↗
USGS1984

Models for the deposition of Mesozoic-Cenozoic fine-grained organic-carbon-rich sediment in the deep sea

The widespread occurrence of organic-carbon-rich strata (‘black shales’) in certain portions of Jurassic, Cretaceous and Cenozoic sequences has been well-documented from Deep Sea Drilling Project sites in the Atlantic and Pacific Oceans and from sequences, now exposed on land, originally deposited in the Tethyan ocean. These ancient black shales usually have been explained by analogy with examples of modern deep-sea sediments in which organic matter locally is preserved by (1) increasing the supply of organic matter, (2) increasing the rate of sedimentation, and/or (3) decreasing the oxygen content of the bottom water. However, detailed examination of many black shales reveals characteristics that cannot be explained by simple local models, including: their approximate coincidence in time globally; their occurrence in a variety of different environments, including open oxygenated oceans, restricted basins, deep and shallow water; their interbedding with organic-carbonpoor strata which often dominate a so-called black shale sequence; their deposition by pelagic, hemipelagic, turbiditic and other processes; and the variations in type and amount of organic matter that occur even within the same sequence. A more complex model for the origin of black shales therefore appears most appropriate, in which the cyclic preservation of organic matter depends on the interplay of the three main variables, namely supply of organic matter, sedimentation rate, and deep-water oxygenation, each of which varies independently to some extent. The variation and relative importance of these parameters in individual basins and widespread black shale deposition in general are linked globally and temporally by changes in global sea-level, climate and related changes in oceanic circulation. An important and often overlooked factor for the supply of organic matter to deep-basin sediments is the frequency and magnitude of redepositional processes. The interplay of these variables is discussed in relation to the middle Cretaceous and Cenozoic organic-carbon-rich strata, in particular, which show marked differences in the relative importance of the different variables.

Geological Society of London Special Publications↗
USGS1987

Crustal extension along a rooted system of imbricate low-angle faults: Colorado River extensional corridor, California and Arizona

The upper 10 to 15 km of crystalline crust in the 100-km-wide Colorado River extensional corridor of mid-Tertiary age underwent extension along an imbricate system of gently dipping normal faults. Detachment faults cut gently down-section eastward in the direction of tectonic transport from a headwall breakaway, best expressed in the Old Woman Mountains, California. Successively higher and more distal allochthons are displaced farther from the headwall, some as much as tens of kilometres. The basal fault(s) cut initially to depths of 10 to 15 km, the palaeothickness of a tilted allochthonous slab of basement rocks above the Chemehuevi-Whipple Mountains detachment fault(s). Hanging wall blocks tilt consistently toward the headwall as shown by dips of capping Tertiary strata and of originally horizontal Proterozoic diabase dykes. Block tilts and the degree of extension increase northeastward across much of the corridor. The faults are interpreted as rooting under the unbroken Hualapai Mountains and Colorado Plateau on the down-dip side of the corridor in Arizona. Slip on faults at all exposed levels of the crust was unidirectional, and totals an estimated 50 km. These data and inferences support the concept that the crust in California moved out from under Arizona along a rooted, normal-slip shear system. Brittle thinning above the sole faults affected the entire upper crust, and in places wholly removed it along the central part of the corridor. Upwarp exposed metamorphic core complexes in footwall domes.

Geological Society Special Publication↗
USGS1989

Evolution of the western part of the Coast plutonic–metamorphic complex, South-Eastern Alaska, USA: A summary

The western Cordillera of North America extends for over 6000 km from the tip of Baja California to the Alaska Range. It includes a wide variety of metamorphic and plutonic terrains, but none is more spectacular scenically or geologically than the Coast plutonic-metamorphic complex (Brew & Ford 1984) of western Canada and south-eastern Alaska. This report briefly describes the evolution of the western part of the complex, integrating information from the deformational, plutonic and metamorphic events. Most of the original studies are reported by the authors in U.S. Geological Survey Circular numbers 733, 751, 823-B, 868, 939, 945, 967 and 978, and are not cited specifically here. This summary does not contain either a comprehensive bibliography or a comparison of the metamorphic histories of south-eastern Alaska with the adjacent parts of British Columbia. The Coast plutonic-metamorphic complex is here divided into three major elements: the western metamorphic, the central granitic and the eastern metamorphic zones (Fig. 1). The western metamorphic belt is extremely long (900 km), and narrow (7–25 km). It consists of regional dynamothermally and regional thermally metamorphosed rocks with mineral assemblages ranging from prehnite-pumpellyite to upper amphibolite facies, scattered mesozonal to epizonal granitic bodies, and a few concentrically zoned mafic-ultramafic masses. The metamorphic grade and the amount of deformation increase from south-west to north-east, culminating at, or slightly to the north-east of, the ‘great tonalite sill’: a remarkable 700-km-long, 3- to 25-km-wide vertical to northeast-dipping belt of mostly syntectonic plutons of approximately the same age, composition and structural

Alaska↗
USGS1996

Deep-sea ostracode shell chemistry (Mg:Ca ratios) and late Quaternary Arctic Ocean history

The magnesium:calcium (Mg:Ca) and strontium:calcium (Sr:Ca) ratios were investigated in shells of the benthic ostracode genus Krithe obtained from 64 core-tops from water depths of 73 to 4411 m in the Arctic Ocean and Nordic seas to determine the potential of ostracode shell chemistry for palaeoceanographic study. Shells from the Polar Surface Water (−1 to −1.5°C) had Mg:Ca molar ratios of about 0.006–0.008; shells from Arctic Intermediate Water (+0.3 to +2.0°C) ranged from 0.09 to 0.013. Shells from the abyssal plain and ridges of the Nansen, Amundsen and Makarov basins and the Norwegian and Greenland seas had a wide scatter of Mg:Ca ratios ranging from 0.007 to 0.012 that may signify post-mortem chemical alteration of the shells from Arctic deep-sea environments below about 1000 m water depth. There is a positive correlation ( r 2 = 0.59) between Mg:Ca ratios and bottom-water temperature in Krithe shells from Arctic and Nordic seas from water depths <900 m. Late Quaternary Krithe Mg:Ca ratios were analysed downcore using material from the Gakkel Ridge (water depths 3047 and 3899 m), the Lomonosov Ridge (water depth 1051 m) and the Amundsen Basin (water depth 4226 m) to test the core-top Mg:Ca temperature calibration. Cores from the Gakkel and Lomonosov ridges display a decrease in Mg:Ca ratios during the interval spanning the last glacial/deglacial transition and the Holocene, perhaps related to a decrease in bottom water temperatures or other changes in benthic environments.

Geological Society Special Publication↗
USGS1996

Iron and manganese oxide mineralization in the Pacific

Iron, manganese, and iron-manganese deposits occur in nearly all geomorphologic and tectonic environments in the ocean basins and form by one or more of four processes: (1) hydrogenetic precipitation from cold ambient seawater, (2) precipitation from hydrothermal fluids, (3) precipitation from sediment pore waters that have been modified from bottom water compositions by diagenetic reactions in the sediment column and (4) replacement of rocks and sediment. Iron and manganese deposits occur in five forms: nodules, crusts, cements, mounds and sediment-hosted stratabound layers. Seafloor oxides show a wide range of compositions from nearly pure iron to nearly pure manganese end members. Fe/Mn ratios vary from about 24 000 (up to 58% elemental Fe) for hydrothermal seamount ironstones to about 0.001 (up to 52% Mn) for hydrothermal stratabound manganese oxides from active volcanic arcs. Hydrogenetic Fe-Mn crusts that occur on most seamounts in the ocean basins have a mean Fe/Mn ratio of 0.7 for open-ocean seamount crusts and 1.2 for continental margin seamount crusts. Fe-Mn nodules of potential economic interest from the Clarion-Clipperton Zone have a mean Fe/Mn ratio of 0.3, whereas the mean ratio for nodules from elsewhere in the Pacific is about 0.7. Crusts are enriched in Co, Ni and Pt and nodules in Cu and Ni, and both have significant concentrations of Pb, Zn, Ba, Mo, V and other elements. In contrast, hydrothermal deposits commonly contain only minor trace metal contents, although there are many exceptions, for example, with Ni contents up to 0.66%, Cr to 1.2%, and Zn to 1.4%. Chondrite-normalized REE patterns generally show a positive Ce anomaly and abundant ΣREEs for hydrogenetic and mixed hydrogenetic-diagenetic deposits, whereas the Ce anomaly is negative for hydrothermal deposits and ΣREE contents are low. However, the Ce anomaly in crusts may vary from strongly positive in East Pacific crusts to slightly negative in West Pacific crusts, which may reflect the redox conditions of seawater. The concentration of elements in hydrogenetic Fe-Mn crusts depends on a wide variety of water column and crust surface characteristics, whereas concentration of elements in hydrothermal oxide deposits depends of the intensity of leaching, rock types leached, and precipitation of sulphides at depth in the hydrothermal system.

Geological Society Special Publication↗
USGS1998

Sediment delivery to the Gulf of Alaska: Source mechanisms along a glaciated transform margin

Sediment delivery to the Gulf of Alaska occurs via four areally extensive deepwater fans, sourced from grounded tidewater glaciers. During periods of climatic cooling, glaciers cross a narrow shelf and discharge sediment down the continental slope. Because the coastal terrain is dominated by fjords and a narrow, high-relief Pacific watershed, deposition is dominated by channellized point-source fan accumulations, the volumes of which are primarily a function of climate. The sediment distribution is modified by a long-term tectonic translation of the Pacific plate to the north along the transform margin. As a result, the deep-water fans are gradually moved away from the climatically controlled point sources. Sets of abandoned channels record the effect of translation during the Plio-Pleistocene.

Geological Society Special Publication↗
USGS1998

Ordovician K-bentonites in the Argentine Precordillera: Relations to Gondwana margin evolution

Ordovician K-bentonites have now been recorded from >20 localities in the vicinity of the Argentine Precordillera. Most occur in the eastern thrust belts, in the San Juan Limestone and the overlying the Gualcamayo Formation, but a few ash beds are known also from the central thrust belts. The oldest occur in the middle Arenig I. victoriae lunatus graptolite ( Oe. evae conodont) Zone, and the youngest in the middle Llanvirn P. elegans ( P. suecicus ) Zone. Mineralogical characteristics, typical of other Ordovician K-bentonites, include a matrix of illite/smectite mixed-layer clay and a typical felsic volcanic phenocryst assemblage: biotite, beta-form quartz, alkali and plagioclase feldspar, apatite, and zircon, with lesser amounts of hornblende, clinopyroxene, titanite and Fe-Ti oxides. The proportions of the mineral phases and variations in their crystal chemistry are commonly unique to individual (or small groups of) K-bentonite beds. Glass melt inclusions preserved in quartz are rhyolitic in composition. The sequence is unique in its abundance of K-bentonite beds, but a close association between the Precordillera and other Ordovician sedimentary basins cannot be established. The ash distribution is most consistent with palaeogeographical reconstructions in which early Ordovician drifting of the Precordillera occurred in proximity to one or more volcanic arcs, and with eventual collision along the Andean margin of Gondwana during the mid-Ordovician Ocloyic event of the Famatinian orogeny. The Puna-Famatina terrane northeast of the Precordillera might have served as the source of the K-bentonite ashes, possibly in concert with active arc magmatism on the Gondwana plate itself.

Geological Society Special Publication↗
USGS1998

Geology of the Sierra de Fiambala, northwestern Argentina: Implications for Early Palaeozoic Andean tectonics

Field mapping in conjunction with structural, metamorphic, and geochronological data document the tectono-thermal history of exhumed deep crustal rocks in the Sierra de Fiambalá, NW Argentina. The range consists of two structural blocks distinguished by different metasedimentary sequences and different grades of metamorphism. Orthogneiss and paragneiss in the northern structural block may have a Precambrian history. Greenschist- to amphibolite-facies metamorphism, intrusion, and injection migmatization affected all rocks at 540–550 Ma. A subsequent event in the Late Cambrian to Ordovician ( c. 515 to 470 Ma) involved amphibolite- to granulite-facies metamorphism, mafic intrusion, and deformation, followed by cooling through mid-Palaeozoic time. The emplacement of Carboniferous (325–350 Ma) post-tectonic granites caused reheating and retrogression that was strongest toward the northeast part of the range. The Cambrian, Ordovician, and Carboniferous events in the Sierra de Fiambalá were of regional extent as indicated by temporal correlations with events reported for other deep crustal rocks of the northern Sierras Pampeanas. Correlations between periods of intrusion and high-grade metamorphism in the northern Sierras Pampeanas and volcanic-sedimentary events in the adjacent supracrustal exposures confirm that rocks in the northern Sierras Pampeanas formed at deep (10–25 km) structural levels in the early Palaeozoic continental margin of Gondwana.

Geological Society Special Publication↗
USGS1999

Depositional facies and sequence stratigraphy of a Lower Carboniferous bryozoan-crinoidal carbonate ramp in the Illinois Basin, mid-continent USA

The Lower Carboniferous Fort Payne and Ullin Formations in the Illinois Basin form the transgressive and highstand systems tracts that were deposited in a carbonate ramp setting. During deposition of the Ullin Limestone, biotic communities dominated by fenestrate bryozoans and echinoderms (primarily crinoids) proliferated, possibly in response to global tectonic, biological, and oceanographic events that affected bathymetry and nutrient supply. The Fort Payne Formation consists of a dark grey-brown, siliceous and argillaceous lime mudstone in the lower part (transgressive systems tract) and a very fine-grained wackestone to packstone with rare mud mounds in the upper part (early highstand), and was deposited in an outer ramp to basinal environment. During deposition of the lower Ullin Limestone (mostly early highstand), bryozoan-crinoidal build-ups accreted both laterally and vertically into several relatively large carbonate banks, which were partly surrounded by siliceous Fort Payne sea. Bryozoans (primarily fenestrates) were especially prevalent during the late stage of bank development and formed mud-free bioherms up to 120 m thick. In places, carbonate mud mounds also formed during the early stage of bank deposition. Bioherm development declined during deposition of the upper Ullin Limestone (late highstand), and a broad, storm-dominated carbonate ramp was established that became the site for widespread deposition of bryozoan-crinoidal sandwaves. Gradual shallowing led to ooid formation at the end of Ullin deposition. This sequence was terminated by a relative rise in sea level that resulted in deposition of the transgressive facies of the lower part of the overlying Salem Limestone. The depositional style and the nature of skeletal material of the Fort Payne and Ullin Formations are similar to those of cool-water carbonates. A deep-water setting along with upwelling of cool, nutrient-rich oceanic waters may have been responsible for the proliferation of bryozoans and crinoids at this time. The deep-water setting and abundant nutrient supply also may have restricted the formation of ooids and proliferation of shallow-water calcareous organisms.

Geological Society Special Publication↗
USGS1999

The northern Sacramento Mountains, southwest United States. Part II: Exhumation history and detachment faulting

Thermochronologic and thermobarometric data reveal the timing, distribution and intensity of thermal events associated with detachment faulting in the Sacramento Mountains metamorphic core complex. In the northwest Sacramento Mountains, cooling rates of c. 100°C Ma −1 are associated with Late Cretaceous plutonism followed by cooling of the crust by thermal conduction. Post-Late Cretaceous cooling slowed to c. 1–6°C Ma −1 . Finally, the region records average cooling rates of 38–53°C Ma −1 between c. 20 and 15 Ma. In contrast, the thermal profile of the northeast Sacramento Mountains is dominated by syntectonic Tertiary plutonism followed by very rapid cooling. A granodioritic suite intruded at c. 680°C and c. 3 kbar at c. 20 Ma, records cooling to <100°C by c. 15 Ma. Such rapid cooling and exhumation suggests that unroofing by tectonic denudation was the driving mechanism for the final cooling. The similarity of the miocene cooling profiles between these two areas clearly suggests that the Sacramento Mountains experienced a regional cooling event associated with tectonic unroofing driven by regional Miocene crustal extension. Estimates of the initial angle of the Sacramento Mountains detachment fault using palaeothermal gradients suggest that it was active at a dip of 25°.

Geological Society Special Publication↗
USGS2000

Prodigious polyphyly in imperilled freshwater pearly-mussels (Bivalvia: Unionidae): a phylogenetic test of species and generic designations

Unionid bivalves or freshwater pearly-mussels (Unionoidea: Unionidae) serve as an exemplary system for examining many of the problems facing systematists and conservation biologists today. Most of the species and genera were described in the late 1800s and early 1900s, but few phylogenetic studies have been conducted to test conventional views of species and classification. Pearly-mussels of Gulf Coastal drainages of the southeastern United States from the Escambia (southern Alabama to Florida) to the Suwannee Rivers (Florida) are a unique fauna comprised of approximately 100 species, with about 30 endemic to the region. In this study, mitochondrial cytochrome c oxidase subunit I and 16S rRNA gene sequences were used to test the monophyly and to estimate evolutionary relationships of five unionid species representing three different genera. The molecular phylogenies depict all three genera as polyphyletic. The prodigious polyphyly exhibited within unionids is due to incorrect notions of homology and false assumptions about missing anatomical data. In contrast, the molecular phylogeny provides evidence to support the recognition of all five unionid species as distinct evolutionary entities. Furthermore, molecular genealogical evidence supports the elevation of Quincuncina infucata (Conrad) of the Suwannee River to species level, for which Q. kleiniana (Lea) is available.

Geological Society Special Publication↗
USGS2003

Seismic evidence for a mantle source for mid-Proterozoic anorthosites and implications for models of crustal growth

Voluminous anorthosite intrusions are common in mid-Proterozoic crust. Historically, two end-member models have been proposed for the origin of these anorthosites. In the first model anorthosites derive from fractionation of a mantle source leaving a residue of metagabbro in the lower crust; in the second model anorthosites are the product of partial melting of the lower crust with residual pyroxene and high-grade minerals (i.e. a pyroxenitic and/or metapelitic lower crust). Although a general consensus has developed that the first model provides the best fit to petrological and geochemical constraints, the sparse evidence for mafic and ultramafic counterparts to the anorthosites leaves the issue still unresolved. We use the absolute P-wave velocity and the ratio between P- and S-wave velocities ( V P / V S ) to infer the composition of the lower crust beneath the Marcy Anorthosite (New York State, USA). Seismic refraction data reveal a lower crust 20 km thick, where V P and V P /V S range from top to bottom between 7.0 km s −1 and 7.2 ± 0.1 and 1.84 km s −1 and 1.81 ± 0.02, respectively. Laboratory measurements on rock samples indicate that these seismic properties are typical of plagioclase-rich rocks. Magmatic underplating of basaltic melts is a mechanism to form plagioclase-rich bulk composition for the Grenville crust. At the bottom of the lower crust, increase of P-wave velocity, slight decrease of V P / V S ratios and the presence of a low-reflective seismic Moho are additional observations supporting crustmantle interactions related to magmatic underplating. High P-wave velocity (8.6 km s −1 ) in the upper mantle may indicate that the ultramafic portion (e.g. pyroxenites) of the underplated magma has become eclogite. High average P-wave velocity (6.7 km s −1 ) and V P / V S (1.81), and the exceptional abundance of anorthosites-norites-troctolites among the rocks exposed at the surface, indicate that the Grenville Proterozoic crust may have a unique plagioclase-rich bulk composition. We suggest magmatic underplating, occurring either over a wide time span or with separate syn- and post-collisional magmatic pulses, as being a major crust-forming mechanism operating in mid-Proterozoic time.

Geological Society Special Publication↗
USGS2003

Volatiles in basaltic glasses from a subglacial volcano in northern British Columbia (Canada): Implications for ice sheet thickness and mantle volatiles

Dissolved H 2 O, CO 2 , S and Cl concentrations were measured in glasses from Tanzilla Mountain, a 500 m-high, exposed subglacial volcano from the Tuya-Teslin region, north central British Columbia, Canada. The absence of a flat-topped subaerial lava cap and the dominance of pillows and pillow breccias imply that the Tanzilla Mountain volcanic edifice did not reach a subaerial eruptive phase. Lavas are dominantly tholeiitic basalt with minor amounts of alkalic basalt erupted at the summit and near the base. Tholeiites have roughly constant H 2 O (c.0.56 ± 0.07 wt%), CO 2 (<30 ppm), S ( 980+ or -30 ppm) and Cl ( 200+ or -20 ppm) concentrations. Alkalic basalts have higher and more variable volatile concentrations that decrease with increasing elevation (0.62-0.92 wt% H2O, <30 ppm CO 2 , 870-1110 ppm S and 280-410 ppm Cl) consistent with eruptive degassing. Calculated vapour saturation pressures for the alkalic basalts are 36 to 81 bars corresponding to ice thicknesses of 400 to 900 m. Maximum calculated ice thickness (c. 1 km) is at the lower end of the range of predicted maximum Fraser glaciation (c. 1-2 km), and may indicate initiation of volcanism during the waning stages of glaciation. Temporal evolution from tholeiitic to alkalic compositions may reflect compositional gradients within a melting column, instead of convective processes within a stratified magma chamber. The mantle source region for the subglacial volcanoes is enriched in incompatible elements similar to that for enriched mid-oceanic ridge basalt (e.g. Endeavour Ridge) and does not contain residual amphibole. Thus, metasomatic enrichment most likely reflects small degree partial melts rather than hydrous fluids.

Geological Society Special Publication↗