SEARCH · Search USGS

Results for “Scanning”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2Linked to original sources

USGS2025

System characterization report on Resourcesat-2A Linear Imaging Self Scanning-3 sensor

Executive Summary This report addresses system characterization of the Indian Space Research Organisation Resourcesat-2A Linear Imaging Self Scanning-3 sensor and is part of a series of system characterization reports produced and delivered by the U.S. Geological Survey Earth Resources Observation and Science Cal/Val Center of Excellence since 2021. These reports present and detail the methodology and procedures for characterization, present technical and operational information about the specific sensing system being evaluated, and provide a summary of test measurements, data retention practices, data analysis results, and conclusions. Resourcesat-2A is identical to Resourcesat-2 and was launched in 2016 on the Polar Satellite Launch Vehicle-C36 for continuity of data and improved temporal resolution. The Resourcesat-2 platform (which includes Resourcesat-2A) is of Indian Remote Sensing Satellites-1C/1D–P3 heritage and was built by the Indian Space Research Organisation. Resourcesat-2 and Resourcesat-2A carry the Linear Imaging Self Scanning-3 and Linear Imaging Self Scanning-4 sensors for medium-resolution imaging. More information on Indian Space Research Organisation satellites and sensors is available in the “2022 Joint Agency Commercial Imagery Evaluation—Remote Sensing Satellite Compendium” and from the manufacturer at https://www.isro.gov.in/ . The Earth Resources Observation and Science Cal/Val Center of Excellence system characterization team completed data analyses to characterize the geometric (interior and exterior), radiometric, and spatial performances. To summarize the results, we have determined that this sensor provides an interior geometric performance with mean offsets in the range of 1.75 meters (m; 0.06 pixel) to 6.83 m (0.23 pixel) in easting and −1.83 m (−0.06 pixel) to 1.81 m (0.06 pixel) in northing in band-to-band registration and a root mean square error in the range of 3.81 m (0.13 pixel) to 8.19 m (0.27 pixel) in easting and 2.21 m (0.09 pixel) to 4.72 m (0.16 pixel) in northing. We have measured an exterior geometric error offset in the range of −21.29 to 6.88 m in easting and −7.35 to −2.63 m in northing, and the root mean square error is in the range of 7.19 to 21.43 m in easting and 3.64 to 8.19 m in northing in comparison to the Landsat 8 Operational Land Imager. The measured radiometric performance was in the range of −0.002 to 0.031 in offset and 0.701 to 0.940 in slope, and the spatial performance was in the range of 1.204 to 1.265 pixels for full width at half maximum with a modulation transfer function at a Nyquist frequency in the range of 0.251 to 0.277.

Open-File Report↗

USGS2000

Volumetric evolution of Surtsey, Iceland, from topographic maps and scanning airborne laser altimetry

The volumetric evolution of Surtsey has been estimated on the basis of digital elevation models derived from NASA scanning airborne laser altimeter surveys (20 July 1998), as well as digitized 1:5,000-scale topographic maps produced by the National Land Survey of Iceland and by Norrman. Subaerial volumes have been computed from co-registered digital elevation models (DEM's) from 6 July 1968, 11 July 1975, 16 July 1993, and 20 July 1998 (scanning airborne laser altimetry), as well as true surface area (above mean sea level). Our analysis suggests that the subaerial volume of Surtsey has been reduced from nearly 0.100 km 3 on 6 July 1968 to 0.075 km 3 on 20 July 1998. Linear regression analysis of the temporal evolution of Surtsey's subaerial volume indicates that most of its subaerial surface will be at or below mean sea-level by approximately 2100. This assumes a conservative estimate of continuation of the current pace of marine erosion and mass-wasting on the island, including the indurated core of the conduits of the Surtur I and Surtur II eruptive vents. If the conduits are relatively resistant to marine erosion they will become sea stacks after the rest of the island has become a submarine shoal, and some portions of the island could survive for centuries. The 20 July 1998 scanning laser altimeter surveys further indicate rapid enlargement of erosional canyons in the northeastern portion of the partial tephra ring associated with Surtur I. Continued airborne and eventually spaceborne topographic surveys of Surtsey are planned to refine the inter-annual change of its subaerial volume.

Surtsey↗

USGS2020

Fluorescence spectroscopy of ancient sedimentary organic matter via confocal laser scanning microscopy (CLSM)

Fluorescence spectroscopy via confocal laser scanning microscopy (CLSM) was used to analyze ancient sedimentary organic matter, including Tasmanites microfossils in Devonian shale and Gloecapsomorpha prisca ( G. prisca ) in Ordovician kukersite from North American basins. We examined fluorescence emission as a function of excitation laser wavelength, sample orientation, and with respect to location within individual organic entities and in transects across bedded organic matter. Results from spectral scans of the same field of view in Tasmanites with different laser lines showed progressive red-shift in emission maxima with longer excitation wavelengths. This result indicates steady-state Tasmanites fluorescence emission is an overlapping combination of emission from multiple fluorophore functions. Stokes shift decreased with increasing excitation wavelength, further suggesting the presence of multiple fluorophore functions with different S 1 → S 0 transition energies. This observation also indicates that at longer excitation wavelengths, less absorbed light energy is dissipated via collisional transfer than at shorter excitation wavelengths and may suggest fewer polar functions are preferentially absorbing. Confirming earlier results, emission spectra observed from high fluorescence intensity regions (fold apices) in individual Tasmanites are blue-shifted relative to emission from other locations in the same microfossil. We suggest high intensity emission is from photoselective alignment of polarized excitation with the fluorophore absorption and emission transition moment. The blue shift observed in regions of high intensity emission may be due to relative absence or realignment of polar species, e.g., bridging ether or ester functions, although variations in O abundance could not be confirmed with preliminary time-of-flight secondary ion mass spectrometry (TOF-SIMS) analysis. Tasmanites occurring in consolidated sediments are flattened from original spherical morphology and, in optical microscopy, this burial deformation results in generally parallel extinction (strain-influenced) and positive elongation. The deformation also induces fluorescence anisotropy observed as variations in emission wavelength when individual Tasmanites are measured from their long axis parallel to bedding, whereas this effect is absent in bedding-normal view. Transects from G. prisca -rich source layers into adjacent reservoir layers show decrease in fluorescence intensity and spectral red-shift (increase in full-width half-maximum with increasing red portion of the half-width). These results may suggest an increase in fluorescence quenching across the source-to-reservoir transition zone, consistent with an increase in aromaticity following petroleum expulsion and migration. These observations are supported by increasing reflectance values measured across similar micro-scale transects. Our results highlight the applicability of CLSM as a broad and under-utilized approach for the characterization of sedimentary organic matter and are discussed with perspective toward petroleum processes and thermal indices research.

International Journal of Coal Geology↗

USGS2023

Viability of side-scan sonar to enumerate Paddlefish, a large pelagic freshwater fish, in rivers and reservoirs

Recreational-grade side-scan sonar (SSS) has become an invaluable tool for inland fisheries, particularly when characterizing underwater habitat, but it is being increasingly used for enumerating large-bodied (> 1 m total length [TL]) aquatic fauna. We used SSS in river and reservoir environments to evaluate methods for identifying and counting Paddlefish Polyodon spathula , a large pelagic planktivore of recreational and economic importance that can exceed 2 m in length and weigh over 70 kg. We assessed accuracy and precision among readers to identify Paddlefish by assigning confidence scores (1–3; with 3 being more confident) to sonar images of a ballistics-gel filled fiberglass replica Paddlefish. Readers varied in their confidence scores for the replica Paddlefish and no reader could identify the target beyond 25 m from the transducer. Afterwards, we used SSS to survey several kilometers of a reservoir during summer residency and a large river during springtime spawning migrations. Two readers counted Paddlefish images in the SSS recordings and we estimated population size in the surveyed area with distance sampling. In the reservoir, the number of Paddlefish counted ranged from 172 to 184. In the river, the number of Paddlefish counted ranged from 165 to 617. The exponential model of distance was most-supported for detection in both environments, except there was support for a half-norm distribution for one reader in the river. In the reservoir, abundance estimates were statistically similar between readers at approximately 1500 (7/ha) in the total scanned area. In the river, similar abundance estimates were obtained with the half-norm model from one reader compared to the exponential model of the other reader, resulting in approximately 1500 individuals (30/ha) in the surveyed area. The application of SSS to count Paddlefish has some clear advantages to traditional methods, such as gill netting, and can be done at multiple times of the year. Distance sampling methods compensated for differences in counts among readers, indicating distance sampling can produce similar abundance estimates even when variation in counts exists among readers.

Oklahoma↗

USGS1996

A scan-angle correction for thermal infrared multispectral data using side lapping images

Thermal infrared multispectral scanner (TIMS) images, acquired with side lapping flight lines, provide dual angle observations of the same area on the ground and can thus be used to estimate variations in the atmospheric transmission with scan angle. The method was tested using TIMS aircraft data for six flight lines with about 30% sidelap for an area within Joshua Tree National Park, California. Generally the results correspond to predictions for the transmission scan-angle coefficient based on a standard atmospheric model although some differences were observed at the longer wavelength channels. A change was detected for the last pair of lines that may indicate either spatial or temporal atmospheric variation. The results demonstrate that the method provides information for correcting regional survey data (requiring multiple adjacent flight lines) that can be important in detecting subtle changes in lithology.

Geophysical Research Letters↗

USGS2019

The expectations and challenges of wildlife disease research in the era of genomics: Forecasting with a horizon scan-like exercise

The outbreak and transmission of disease-causing pathogens are contributing to the unprecedented rate of biodiversity decline. Recent advances in genomics have coalesced into powerful tools to monitor, detect, and reconstruct the role of pathogens impacting wildlife populations. Wildlife researchers are thus uniquely positioned to merge ecological and evolutionary studies with genomic technologies to exploit unprecedented ‘Big Data’ tools in disease research; however, many researchers lack the training and expertise required to use these computationally intensive methodologies. To address this disparity, the inaugural ‘Genomics of Disease in Wildlife’ workshop assembled early to mid-career professionals with expertise across scientific disciplines (e.g., genomics, wildlife biology, veterinary sciences, and conservation management) for training in the application of genomic tools to wildlife disease research. A horizon scanning-like exercise, an activity to identify forthcoming trends and challenges, performed by the workshop participants identified and discussed five themes considered to be the most pressing to the application of genomics in wildlife disease research: i) “Improving Communication”, ii) “Methodological and Analytical Advancements”, iii) “Translation into Practice”, iv) “Integrating Landscape Ecology and Genomics”, and v) “Emerging New Questions”. Wide-ranging solutions from the horizon scan were international in scope, itemized both deficiencies and strengths in wildlife genomic initiatives, promoted the use of genomic technologies to unite wildlife and human disease research, and advocated best practices for optimal use of genomic tools in wildlife disease projects. The results offer a glimpse of the potential revolution in human and wildlife disease research possible through multi-disciplinary collaborations at local, regional, and global scales.

Journal of Heredity↗

USGS2006

Characterization of the host response to the myxosporean parasite, Ceratomyxa shasta (Noble), by histology, scanning electron microscopy, and immunological techniques

The tissue response of Salmo gairdneri Richardson, against the myxosporean parasite. Ceratomyxa shasta (Noble), was investigated using histological techniques, scanning electron microscopy and immunological methods. The progress of infection in C. shasta ‐susceptible and resistant steelhead and rainbow trout was examined by standard histological techniques and by indirect fluorescent antibody methods using monoclonal antibodies directed against C. shasta antigens. Trophozoite stages were first observed in the posterior intestine and there was indication that resistance was due to the inability of the parasite to penetrate this tissue rather than to an inflammatory response. Examination of a severely infected intestine by scanning electron microscopy showed extensive destruction of the mucosal folds of the posterior intestine. Western blotting and indirect fluorescent antibody techniques were used to investigate the immunological component of the host response. No antibodies specific for C. shasta were detected by either method.

Journal of Fish Diseases↗

USGS2020

Integrating side-scan sonar and acoustic telemetry to estimate the annual spawning run size of Atlantic sturgeon in the Hudson River

There is considerable interest in evaluating the status and trends of sturgeon populations, yet many traditional approaches to estimating the abundance of fishes are intractable due to their biology and rarity. Side-scan sonar has recently emerged as an effective tool for censusing sturgeon in rivers, yet challenges remain for censusing open populations that may visit specific habitats over periods of time (e.g., spawning runs). We use a hierarchical model to integrate side-scan sonar with acoustic telemetry, to estimate the proportion of a spawning run fitted with acoustic tags (12%; 95% CRI = 8-16%) and extrapolate to the total run size in 2014. Our investigation represents a novel approach to generating run size estimates in a large river and provides the first estimate of Atlantic sturgeon spawning run size for the Hudson River (N ̂ = 466; 95% CRI = 310-745) since the fishery moratorium in the 1990’s. Our estimate suggests that the Hudson River holds one of the largest contemporary populations of Atlantic sturgeon, but also indicates that it remains sharply depleted relative to virgin conditions.

Hudson River↗

USGS2013

Quantitative determination of selenium and mercury, and an ICP-MS semi-quantitative scan of other elements in samples of eagle tissues collected from the Pacific Northwest--Summer 2011

Eagle tissues from dead eagle carcasses were collected by U.S. Fish and Wildlife Service personnel at various locations in the Pacific Northwest as part of a study to document the occurrence of metal and metalloid contaminants. A group of 182 eagle tissue samples, consisting of liver, kidney, brain, talon, feather, femur, humerus, and stomach contents, were quantitatively analyzed for concentrations of selenium and mercury by atomic absorption techniques, and for other elements by semi-quantitative scan with an inductively coupled plasma-mass spectrometer. For the various tissue matrices analyzed by an ICP-MS semiquantitative scan, some elemental concentrations (micrograms per gram dry weight) were quite variable within a particular matrix; notable observations were as follows: lead concentrations ranged from 0.2 to 31 in femurs, 0.1 to 29 in humeri, 0.1 to 54 in talons, less than (<) 0.05 to 120 in livers, <0.05 to 34 in kidneys, and 0.05 to 8 in brains; copper concentrations ranged from 5 to 9 in feathers, 8 to 47 in livers, 7 to 43 in kidneys, and 7 to 28 in brains; cadmium concentrations ranged from 0.1 to 10 in kidneys. In stomach contents, concentrations of vanadium ranged from 0.08 to 5, chromium 2 to 34, manganese 1 to 57, copper 2 to 69, arsenic <0.05 to 6, rubidium 1 to 13, and barium <0.5 to 18. Selenium concentrations from highest to lowest based on the matrix mean were as follows: kidney, liver, feather, brain, stomach content, talon, femur, and humerus. For mercury, the highest to lowest concentrations were feather, liver, talon, brain, stomach content, femur, and humerus.

Data Series↗

USGS2015

Scanning and georeferencing historical USGS quadrangles (ver. 2.0, May 2015)

The U.S. Geological Survey (USGS) National Geospatial Program is scanning published USGS 1:250,000-scale and larger topographic maps printed between 1884, the inception of the topographic mapping program, and 2006. The goal of this scanning, which started in 2011, is to provide a digital repository of USGS topographic maps, available to the public at no cost. For more than 125 years, the USGS topographic maps have accurately portrayed the complex geography of the Nation. The USGS is the Nation’s largest producer of printed topographic maps, and, prior to 2006, USGS topographic maps were created using traditional cartographic methods and printed using a lithographic process. As the USGS continues release of a new generation of topographic maps (US Topo) in electronic form, the topographic map remains an indispensable tool for government, science, industry, land management planning, and leisure.

Fact Sheet↗

USGS2007

Side-scan sonar imaging of the Colorado River, Grand Canyon

This paper presents data collection methods and side-scan sonar data collected along the Colorado River in Grand Canyon in August and September of 2000. The purpose of the data collection effort was to image the distribution of sand between Glen Canyon Dam and river mile 87.4 before and after the 31,600 cfs flow of September 6-8. The side-scan sonar imaging focused on pools between rapids but included smaller rapids where possible.

Arizona↗

USGS2021

System characterization report on Resourcesat-2 Linear Imaging Self Scanning-3 (LISS–3) sensor

Executive Summary This report addresses system characterization of the Indian Space Research Organisation Resourcesat-2 Linear Imaging Self Scanning-3 (LISS–3) sensor and is part of a series of system characterization reports produced and delivered by the U.S. Geological Survey Earth Resources Observation and Science Cal/Val Center of Excellence in 2021. These reports present and detail the methodology and procedures for characterization; present technical and operational information about the specific sensing system being evaluated; and provide a summary of test measurements, data retention practices, data analysis results, and conclusions. Resourcesat-2 is a medium-resolution satellite launched in 2011 on the Polar Satellite Launch Vehicle-C16 launch vehicle. Resourcesat-2 carries the same sensing elements as Resourcesat-1 (launched in October 2003) and provides continuity for the mission. The objectives of the Resourcesat mission are to provide remote sensing data services to global users, focusing on data for integrated land and water resources management. Resourcesat-2A is identical to Resourcesat-2 and was launched in 2016 on the Polar Satellite Launch Vehicle-C36 launch vehicle for continuity of data and improved temporal resolution. The two satellites operating in tandem improved the revisit capability from 5 days to 2–3 days. The Resourcesat-2 platform is of Indian Remote Sensing Satellites-1C/1D–P3 heritage and was built by the Indian Space Research Organisation. Resourcesat-2 and Resourcesat-2A carry the Advanced Wide Field Sensor and LISS–3, as well as the Linear Imaging Self Scanning-4 for medium-resolution imaging. More information on Indian Space Research Organisation satellites and sensors is available in the “2020 Joint Agency Commercial Imagery Evaluation—Remote Sensing Satellite Compendium” and from the manufacturer at https://www.isro.gov.in/ . The Earth Resources Observation and Science Cal/Val Center of Excellence system characterization team completed data analyses to characterize the geometric (interior and exterior), radiometric, and spatial performances. Results of these analyses indicate that LISS–3 has an interior geometric performance in the range of −4.620 (−0.154 pixel) to 13.230 meters (m; 0.441 pixel) in easting and −12.360 (−0.412 pixel) to 1.500 m (0.050 pixel) in northing in band-to-band registration, an exterior geometric error of −27.805 (−0.927 pixel) to 26.578 m (0.886 pixel) in easting and −35.341 (−1.178 pixel) to −6.286 m (−0.210 pixel) in northing offset in comparison to the Landsat 8 Operational Land Imager, a radiometric performance in the range of −0.096 to 0.036 in offset and 0.585–0.946 in slope, and a spatial performance in the range of 1.87–1.95 pixels for full width at half maximum, with a modulation transfer function at a Nyquist frequency in the range of 0.045–0.070.

Open-File Report↗

USGS2025

System characterization report on Resourcesat-2A Linear Imaging Self Scanning-4 sensor

Executive Summary This report documents the system characterization of the Indian Space Research Organisation Resourcesat-2A Linear Imaging Self Scanning-4 (LISS–4) sensor. It is part of a series of system characterization reports produced by the U.S. Geological Survey Earth Resources Observation and Science Cal/Val Center of Excellence. These reports describe the methodology and procedures used for characterization, present technical and operational information about the specific sensing system being evaluated, and provide a summary of test measurements, data retention practices, data analysis results, and conclusions. Resourcesat-2A was launched in 2016 on the Polar Satellite Launch Vehicle-C36; it is identical to Resourcesat-2, and together, they decrease imaging revisit time from 5 days to 2–3 days, providing data continuity and improved temporal resolution. Resouresat-2 and 2A carry the Advanced Wide Field Sensor, Linear Imaging Self Scanning-3, and LISS–4 medium-resolution imaging sensors, continuing the legacy of the Indian Space Research Organisation’s Indian Remote Sensing-1C/1D/P3 satellite programs. More information about the Indian Space Research Organisation’s satellites and sensors is available through the Joint Agency Commercial Imagery Evaluation Earth Observing Satellites Online Compendium at https://calval.cr.usgs.gov/apps/compendium/ and from the manufacturer at https://www.isro.gov.in/ . The Earth Resources Observation and Science Cal/Val Center of Excellence system characterization team assessed the geometric, radiometric, and spatial performances of the Resourcesat-2A LISS–4 sensor. Geometric performance is divided into the interior geometric performance of band-to-band registration and the exterior geometric performance of geolocation accuracy. The interior geometric performance had mean offsets in the range of −0.118 to 0.024 pixel in easting and −0.053 to 0.022 pixel in northing with root mean square error values from 0.067 to 0.230 pixel in easting and from 0.087 to 0.2 pixel in northing. The exterior geometric performance had offsets in the range of 2.55 to 7.85 meters (m) in easting and −6.15 to 11.15 m in northing with root mean square error values in the range of 2.6 to 8.2 m in easting and 6.35 to 11.8 m in northing compared to the U.S. Department of Agriculture National Agriculture Imagery Program and WorldView-3 orthoimages. The measured radiometric performance had offsets from 0.003 to 0.024 and slopes from 0.736 to 0.952, and spatial performance was in the range of 1.633 to 1.903 pixels for the full width at half maximum with a modulation transfer function at a Nyquist frequency in the range of 0.0529 to 0.0952.

Open-File Report↗

USGS1992

Digital processing of side-scan sonar data with the Woods Hole image processing system software

Since 1985, the Branch of Atlantic Marine Geology has been involved in collecting, processing and digitally mosaicking high and low-resolution side-scan sonar data. Recent development of a UNIX-based image-processing software system includes a series of task specific programs for processing side-scan sonar data. This report describes the steps required to process the collected data and to produce an image that has equal along- and across-track resol

Open-File Report↗

USGS2016

Quantifying the eroded volume of mercury-contaminated sediment using terrestrial laser scanning at Stocking Flat, Deer Creek, Nevada County, California, 2010–13

High-resolution ground-based light detection and ranging (lidar), also known as terrestrial laser scanning, was used to quantify the volume of mercury-contaminated sediment eroded from a stream cutbank at Stocking Flat along Deer Creek in the Sierra Nevada foothills, about 3 kilometers west of Nevada City, California. Terrestrial laser scanning was used to collect sub-centimeter, three-dimensional images of the complex cutbank surface, which could not be mapped non-destructively or in sufficient detail with traditional surveying techniques. The stream cutbank, which is approximately 50 meters long and 8 meters high, was surveyed on four occasions: December 1, 2010; January 20, 2011; May 12, 2011; and February 4, 2013. Volumetric changes were determined between the sequential, three-dimensional lidar surveys. Volume was calculated by two methods, and the average value is reported. Between the first and second surveys (December 1, 2010, to January 20, 2011), a volume of 143 plus or minus 15 cubic meters of sediment was eroded from the cutbank and mobilized by Deer Creek. Between the second and third surveys (January 20, 2011, to May 12, 2011), a volume of 207 plus or minus 24 cubic meters of sediment was eroded from the cutbank and mobilized by the stream. Total volumetric change during the winter and spring of 2010–11 was 350 plus or minus 28 cubic meters. Between the third and fourth surveys (May 12, 2011, to February 4, 2013), the differencing of the three-dimensional lidar data indicated that a volume of 18 plus or minus 10 cubic meters of sediment was eroded from the cutbank. The total volume of sediment eroded from the cutbank between the first and fourth surveys was 368 plus or minus 30 cubic meters.

California↗

USGS2019

Quantifying the eroded and deposited mass of mercury-contaminated sediment by using terrestrial laser scanning at the confluence of Humbug Creek and the South Yuba River, Nevada County, California, 2011–13

High-resolution, terrestrial laser scanning, also known as ground-based lidar (light detection and ranging), was used to quantify the volume of mercury-contaminated sediment eroded from an outcrop of historical placer-mining debris at the confluence of Humbug Creek and the South Yuba River in the Sierra Nevada foothills, about 17 kilometers northeast of Grass Valley, California, and delivered to a zone below an observed flood stage of the South Yuba River. Substantial quantities of mercury were used and lost to the environment from historical placer gold mining activities on the western slope of the Sierra Nevada, California, and recent studies have documented continued persistence of mercury and methylmercury concentrations in water, sediment, fish, and predatory invertebrates in the Yuba River drainage basin in relation to suspected mercury sources. To identify areas that have high levels of mercury contamination as possible remediation targets in the Yuba River drainage basin and other areas in the Sierra Nevada, the U.S. Geological Survey worked in cooperation with the Bureau of Land Management on this and other detailed studies. Malakoff Diggings, one of the largest hydraulic gold mines in the Sierra Nevada, is 3.5 kilometers north of the study site in the Humbug Creek subbasin. Terrestrial laser scanning was used to produce centimeter-scale, three-dimensional maps of the complex outcrop surface, which was composed of an upper erosional area (cliff and over-steepened slope) and a lower depositional area (colluvial slope). The outcrop could not be mapped non-destructively or in sufficient detail by traditional surveying techniques. The study site, which was approximately 70 meters long, 30 meters wide and 20 meters high, was surveyed four times in 2 years (December 15, 2011; October 25, 2012; January 4, 2013; and November 22, 2013) to determine volumetric differences in the upper erosional and lower depositional areas between surveys. Measured changes in volume for the upper erosional area and lower depositional area were multiplied by the corresponding sediment density so that a mass-balance relationship, between the eroded and deposited sediment during each period, could be used to estimate the amount of mercury-contaminated sediment that was transported to below the base of the colluvial slope, where it could be mobilized by the South Yuba River during a flood having a 5-to-10-year recurrence interval. On December 2, 2012, a flood of this estimated magnitude reached the base of the colluvial slope. Between the first and second surveys (December 15, 2011–October 25, 2012), an estimated mass of 18±9.2 kilograms of sediment was transported from steeper slopes to the gently sloping river bank below the base of the colluvial slope. Between the second and third surveys (October 25, 2012–January 4, 2013), an atmospheric river caused heavy precipitation at the study site during late November and early December 2012. This short-duration, high-intensity rain resulted in a large amount of erosion and deposition at the study site and also caused high streamflow (flood stage) in the South Yuba River. From October 2012 to January 2013, 51±31 kilograms of sediment was transported to below the base of the colluvial slope, that is, below the high-water mark of December 2, 2012. Between the third and fourth surveys (January 4, 2013–November 22, 2013), an additional 10±26 kilograms of sediment was transported to below the base of the colluvial slope. During the 24 months of the study, the total mass of sediment delivered below the base of the colluvial slope and the high-water mark of December 2, 2012, was 79±66 kilograms. In any given year there is a 10–20-percent chance (5-to-10-year recurrence interval) of a flood equal to or greater than that of the December 2, 2012, flood, which could transport mercury-contaminated sediment at the study site into the South Yuba River. Hydraulically modeled estimates of the South Yuba River stage during floods having a 50- and 100-year recurrence interval (2- and 1-percent annual exceedance probability, respectively) indicated that resulting river stages could be 2.2–3.0 meters above the base of the colluvial slope, or 2.2–3.0 meters above the high-water mark of December 2, 2012. Such high river stages would be likely to inundate the lower half of the colluvial slope and mobilize a substantial volume of mercury-contaminated sediment to downstream areas.

California↗

USGS1956

Rapid-scanning microphotometry

A rapid-scanning microphotometer is described with which a 10-inch spectrum may be scanned in two minutes. The resulting chart may be 60, 300, or 1,500 cm long (wavelength scale) and 4 cm high (intensity scale). Commercially available components are used.

Trace Elements Investigations↗

USGS2015

Can low-resolution airborne laser scanning data be used to model stream rating curves?

This pilot study explores the potential of using low-resolution (0.2 points/m 2 ) airborne laser scanning (ALS)-derived elevation data to model stream rating curves. Rating curves, which allow the functional translation of stream water depth into discharge, making them integral to water resource monitoring efforts, were modeled using a physics-based approach that captures basic geometric measurements to establish flow resistance due to implicit channel roughness. We tested synthetically thinned high-resolution (more than 2 points/m 2 ) ALS data as a proxy for low-resolution data at a point density equivalent to that obtained within most national-scale ALS strategies. Our results show that the errors incurred due to the effect of low-resolution versus high-resolution ALS data were less than those due to flow measurement and empirical rating curve fitting uncertainties. As such, although there likely are scale and technical limitations to consider, it is theoretically possible to generate rating curves in a river network from ALS data of the resolution anticipated within national-scale ALS schemes (at least for rivers with relatively simple geometries). This is promising, since generating rating curves from ALS scans would greatly enhance our ability to monitor streamflow by simplifying the overall effort required.

Krycklan catchment↗