Search USGS⌕ Search

SEARCH · Search USGS

Results for “Saprolite”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2Linked to original sources
USGS1989

Investigations of the characteristics, origin, and residence time of the upland residual mantle of the Piedmont of Fairfax County, Virginia

Undisturbed cores of upland regolith developed from a variety of crystalline rocks of the Piedmont province in Fairfax County, Va., have been obtained by using a combination of Shelby tubes, Denison sampler, and modified diamond core drilling. The core study correlated variations in chemistry, mineralogy, and texture with engineering properties throughout individual weathering profiles and contrasted these parameters among weathering profiles developed from various parent rocks. Coring sites were chosen to obtain a maximum depth of weathering on diverse lithologies. The rocks that were investigated included metapelite, metagraywacke, granite, diabase, and serpentinite. Four to twelve samples per core were selected for analysis of petrography, texture, clay mineralogy, and major-element chemistry. The number of samples was determined on the basis of (1) the thickness of the weathering profile (from about 1 m in serpentinite to more than 30 m in pelitic schist) and (2) megascopic changes in the weathering profile. Shear strength and compressibility were determined on corresponding segments of core. Standard penetration tests were performed adjacent to coring sites to evaluate in-place engineering properties. The regolith profiles on all rocks can be subdivided into soil, massive subsoil, saprolite, and weathered rock zones. Major differences in thicknesses of these zones are related to parent rock. Total regolith thickness is related to saprolite thickness. Saprolite is thickest on quartzofeldspathic metapelite, metagraywacke, and granite; thinner on diabase; and thinnest on serpentinite. Thickness of saprolite is related to rock structure and mineralogy. Geochemical changes of saprolite developed from each rock type follow predictable trends from fresh rock to soil profile, with increases in Ti, AI, Fe 3 +, and H 2 0+relative to absolute losses of Si, Fe2+, Mg, Ca, and Na. These variations are more pronounced in the weathering profiles above mafic and ultramafic rocks than in those above metagraywacke. Clay minerals in granite, schist, and metagraywacke saprolites are kaolinite, dioctahedral vermiculite, interlayered mica-vermiculite, and minor illite. Gibbsite is developed in near-surface samples of schist. Standard penetration test data for the upper 7 m of saprolite above schist, metagraywacke, and granite suggest alternations between stronger and weaker horizons that correlate with megascopic ally identified zones: soil, massive subsoil, and saprolite. The data correlate with density. Shear strength increases fairly regularly downward in the weathering profile. The engineering behavior of diabase saprolite is controlled by a dense, plastic, near-surface clay layer (montmorillonite and kaolinite) overlying rock that is weathered to a granular state (grus); the engineering properties of serpentinite are controlled by a very thin weathering profile. Similarities in regolith thickness, zonation, mineralogy, and chemistry of quartzofeldspathic rocks indicate the existence of fundamental geochemical and geomechanical controls on regolith evolution on the Piedmont upland. Data from the profiles of quartzofeldspathic regolith are used to construct a model suggesting the principal rate-control steps in the development and downwasting of the upland regolith. This model is consistent with available information about Piedmont hydrology and tectonic uplift.

Professional Paper↗
USGS2000

Regoliths of the middle-Atlantic Piedmont and evolution of a polymorphic landscape

The regolith overlying the alumino-silicate rocks of the middle-Atlantic Piedmont Province consists primarily of saprolite with a thin veneer of diamictons of colluvial origin. Thickness and distribution of the saprolite is related to landform and lithology. For example, on uplands isovolumetric weathering of the Loch Raven Schist produces saprolite averaging 55 ft (17 m) thick. On Port Deposit Gneiss, saprolite beneath uplands averages 42 ft (13 m) in thickness. The saprolite results from the reaction of alumino-silicate rocks with through-flowing groundwater. Chemical weathering of the rock results in clay and resistate minerals, residual rock layers, corestones, and pinnacles. Surface erosion of saprolite with quartzite and metagraywacke residual layers may produce a 'washboard' topography. Surface erosion of a metagabbro saprolite containing corestones and pinnacles results in a surface with lag deposits of corestones and emergent pinnacles. The diamicton material comes from the underlying saprolite, weathered rock and bedrock. Generally, diamictons are thinner on uplands and upper slopes, and thicker at the base of slopes and in hollows and gathering areas of first-order streams. The saprolite and colluvium reflect response of geomorphic processes (chemical weathering, fluvial incision, and periglacial processes) to rock lithology and landscape. The modifications to the landscape have been driven by neotectonic crustal warping and alternating periglacial-humid temperate climates. Altogether these varied interactions have resulted in a Holocene polymorphic landscape.

Southeastern Geology↗
USGS1977

Mineralogical, chemical, and physical properties of the regolith overlying crystalline rocks, Fairfax County, Virginia: a preliminary report

Undisturbed cores of saprolite developed on crystalline rocks of the Piedmont Province in Fairfax County, Virginia have been obtained using a combination of Shelby tubes, Denison sampler, and modified diamond core-drilling. The principal purpose of the core study is to correlate variations in chemistry, mineralogy and texture with engineering properties throughout the weathering profile. Coring sites were chosen to obtain a maximum depth of weathering on diverse lithologies. The rocks investigated include pelitic schist, metagraywacke, granite, diabase and serpentinite. Four to twelve samples per core were selected, depending on thickness of 1) the weathering profile (from about 1 m in serpentinite to more than 30 m in pelitic schist) and on 2) megascopic changes in saprolite character for analysis of petrography, texture, clay mineralogy andd major element chemistry. Shear strength and compressibility were determined on corresponding segments of core. Standard penetration tests were performed adjacent to coring sites to evaluate engineering properties in situ. Geochemical changes of saprolite developed from each rock type follow predictable trends from fresh rock to soil profile, with relative Increases in Si, Ti, Al, Fe3+ and H20; variable K; and relative loss of Fe 2+, Mg, Ca, and Na. These variations are more pronounced in the weathering profiles over mafic and ultramafic rocks than metagraywacke. Clay minerals in granite, schist and metagraywacke saprolite are kaolinite, dioctahedral vermiculite, interlayered micavermiculite, and minor illite. Gibbsite is locally developed in near-surface samples of schist. Standard penetration test data for the upper 7 m of saprolite over schist and metagraywacke suggest alternations between stronger and weaker horizons than probably reflect variations in lithology including the presence of quartz lenses. Results for granite saprolite are most consistent but indicate lower strength. Shear strength increases fairly regularly downward in the weathering profile. The engineering behavior of diabase saprolite is controlled by a dense, plastic, near-surface clay layer (montmorillonite and kaolinite)overlying rock which is weathered to a granular state (grus), while engineering properties of serpentinite are determined by a very thin weathering profile.

Open-File Report↗
USGS2006

Coupling chemical weathering with soil production across soil-mantled landscapes

Soil-covered upland landscapes constitute a critical part of the habitable world. Our understanding of how they evolve as a function of different climatic, tectonic and geological regimes is important across a wide range of disciplines and depends, in part, on understanding the links between chemical and physical weathering processes. Extensive previous work has shown that soil production rates decrease with increasing soil column thickness, but chemical weathering rates were not measured. Here we examine a granitic, soil-mantled hillslope at Point Reyes, California, where soil production rates were determined using in situ produced cosmogenic nuclides ( 10 Be and 26 Al), and we quantify the extent as well as the rates of chemical weathering of the saprolite from beneath soil from across the landscape. We collected saprolite samples from the base of soil pits and analysed them for abrasion pH as well as for major and trace elements by X-ray fluorescence spectroscopy, and for clay mineralogy by X-ray diffraction spectroscopy. Our results show for the first time that chemical weathering rates decrease with increasing soil thickness and account for 13 to 51 per cent of total denudation. We also show that spatial variation in chemical weathering appears to be topographically controlled: weathering rate decreases with slope across the divergent ridge and increases with upslope contributing area in the convergent swale. Furthermore, to determine the best measure for the extent of saprolite weathering, we compared four different chemical weathering indices – the Vogt ratio, the chemical index of alteration (CIA), Parker's index, and the silicon–aluminium ratio – with saprolite pH. Measurements of the CIA were the most closely correlated with saprolite pH, showing that weathering intensity decreases linearly with an increase in saprolite pH from 4·7 to almost 7. Data presented here are among the first to couple directly rates of soil production and chemical weathering with how topography is likely to control weathering at a hillslope scale.

Earth Surface Processes and Landforms↗
USGS1998

Chemical weathering in a tropical watershed, Luquillo Mountains, Puerto Rico: II. Rate and mechanism of biotite weathering

Samples of soil, saprolite, bedrock, and porewater from a lower montane wet forest, the Luquillo Experimental Forest (LEF) in Puerto Rico, were studied to investigate the rates and mechanisms of biotite weathering. The soil profile, at the top of a ridge in the Rio Icacos watershed, consists of a 50–100-cm thick layer of unstructured soil above a 600–800 cm thick saprolite developed on quartz diorite. The only minerals present in significant concentration within the soil and saprolite are biotite, quartz, kaolinite, and iron oxides. Biotite is the only primary silicate releasing significant K and Mg to porewaters. Although biotite in samples of the quartz diorite bedrock is extensively chloritized, chlorite is almost entirely absent in the saprolite phyllosilicates. Phyllosilicate grains are present as 200–1000 μm wide books below about 50 cm depth. X-ray diffraction (XRD) and electron microprobe analyses indicate that the phyllosilicate grains contain a core of biotite surrounded by variable amounts of kaolinite. Lattice fringe images under transmission electron microscope (TEM) show single layers of biotite altering to two layers of kaolinite, suggesting dissolution of biotite and precipitation of kaolinite at discrete boundaries. Some single 14-Å layers are also observed in the biotite under TEM. The degree of kaolinitization of individual phyllosilicate grains as observed by TEM decreases with depth in the saprolite. This TEM work is the first such microstructural evidence of epitaxial growth of kaolinite onto biotite during alteration in low-temperature environments. The rate of release of Mg in the profile, calculated as a flux through the soil normalized per watershed land area, is approximately 500 mol hectare −1 yr −1 (1.6 × 10 −9 mol Mg m soil −2 s −1 ). This rate is similar to the flux estimated from Mg discharge out the Rio Icacos (1000 mol hectare −1 yr −1 , or 3.5 × 10 −9 mol Mg m soil −2 s −1 ), indicating that scaling up from the soil to the watershed is possible for Mg release. The rate of Mg release from biotite, normalized to Brunauer-Emmett-Teller (BET) surface area, is calculated using a mass balance equation which includes the density and volume of phyllosilicate grains, porewater chemistry and flux, and soil porosity. The mean rates of biotite weathering calculated from K and Mg release rates are approximately 6 and 11 × 10 −16 mol biotite m biotite −2 s −1 respectively, significantly slower than laboratory rates (10 −12 to 10 −11 mol biotite m biotite −2 s −1 ). The discrepancy in scaling down from the soil to the laboratory is probably explained by (1) differences in weathering mechanism between the two environments, (2) higher solute concentrations in soil porewaters, (3) loss of reactive surface area of biotite in the saprolite due to kaolinite and iron oxide coatings, and/or (4) unaccounted-for heterogeneities in flow path through the soil.

El Yunque, Luquillo Experimental Forest, Luquillo ↗
USGS2008

Weathering of the Rio Blanco quartz diorite, Luquillo Mountains, Puerto Rico: Coupling oxidation, dissolution, and fracturing

In the mountainous Rio Icacos watershed in northeastern Puerto Rico, quartz diorite bedrock weathers spheroidally, producing a 0.2-2 m thick zone of partially weathered rock layers (???2.5 cm thickness each) called rindlets, which form concentric layers around corestones. Spheroidal fracturing has been modeled to occur when a weathering reaction with a positive ??V of reaction builds up elastic strain energy. The rates of spheroidal fracturing and saprolite formation are therefore controlled by the rate of the weathering reaction. Chemical, petrographic, and spectroscopic evidence demonstrates that biotite oxidation is the most likely fracture-inducing reaction. This reaction occurs with an expansion in d (0 0 1) from 10.0 to 10.5 A??, forming 'altered biotite'. Progressive biotite oxidation across the rindlet zone was inferred from thin sections and gradients in K and Fe(II). Using the gradient in Fe(II) and constraints based on cosmogenic age dates, we calculated a biotite oxidation reaction rate of 8.2 ?? 10-14 mol biotite m-2 s-1. Biotite oxidation was documented within the bedrock corestone by synchrotron X-ray microprobe fluorescence imaging and XANES. X-ray microprobe images of Fe(II) and Fe(III) at 2 ??m resolution revealed that oxidized zones within individual biotite crystals are the first evidence of alteration of the otherwise unaltered corestone. Fluids entering along fractures lead to the dissolution of plagioclase within the rindlet zone. Within 7 cm surrounding the rindlet-saprolite interface, hornblende dissolves to completion at a rate of 6.3 ?? 10-13 mol hornblende m-2 s-1: the fastest reported rate of hornblende weathering in the field. This rate is consistent with laboratory-derived hornblende dissolution rates. By revealing the coupling of these mineral weathering reactions to fracturing and porosity formation we are able to describe the process by which the quartz diorite bedrock disaggregates and forms saprolite. In the corestone, biotite oxidation induces spheroidal fracturing, facilitating the influx of fluids that react with other minerals, dissolving plagioclase and chlorite, creating additional porosity, and eventually dissolving hornblende and precipitating secondary minerals. The thickness of the resultant saprolite is maintained at steady state by a positive feedback between the denudation rate and the weathering advance rate driven by the concentration of pore water O2 at the bedrock-saprolite interface. ?? 2008 Elsevier Ltd. All rights reserved.

Geochimica et Cosmochimica Acta↗
USGS1990

The role of soil processes in determining mechanisms of slope failure and hillslope development in a humid-tropical forest eastern Puerto Rico

Translational failures, with associated downslope earthflow components and shallow slides, appear to be the primary mechanism of hillslope denudation in the humid tropical forests of the mountains of eastern Puerto Rico. In-situ weathering of quartz diorite and marine-deposited volcaniclastics produces residual soil (saprolite; up to 21 m deep) / weathered rock profiles. Discontinuous zones of contrasting density and permeability particularly in quartz-diorite slopes at 0.5 m, and between 3 and 7 m, create both pathways and impedances for water that can result in excess pore pressures and, ultimately, aid in determining the location of failure planes and magnitudes of slope failures. In combination with relict fractures which create planes of weakness within the saprolite, and the potential significance of tensile stresses in the upper zone of saprolite (hypothesized to be caused by subsurface soil creep), shear failure can then occur during or after periods of heavy rainfall. Results of in-situ shear-strength testing show negative y-intercepts on the derived Mohr-Coulomb failure envelopes (approximately 50% of all tests) that are interpreted as apparent tensile stresses. Observation of tension cracks 1-2 m deep support the test data. Subsurface soil creep can cause extension of the soil and the development of tensile stresses along upper-slope segments. Shear-strength data support this hypothesis for both geologic types. Apparent values of maximum and mean tensile stress are greatest along upper slopes (16.5 and 6.29 kPa). Previously documented maximum rates of downslope movement coincided with local minima of shear strength, and the shear-strength minimum for all tests was located near 0.5 m below land surface, the shallow zone of contrasting permeabilities. These results indicate that subsurface soil creep, a slow semi-continuous process, may exert a profound influence on rapid, shallow slope failures in saprolitic soils. Data indicate that cove slopes in quartz diorite tend to be the most unstable when saturation levels reach 75%. Deep failures (7 m deep) appear the most critical but not the most frequent because pore pressure build-up will occur more rapidly in the upper perched zone of translocated clays before reaching the lower zone between 3 and 7 m. Frequent shallow failures could reduce the probability of deeper failures by removing overburden and reducing shear stress at depth. Deep failures are more likely to result from storm events of great duration and intensity. Sixty-six 'naturally occurring' and more than 100 'road-related' landslides were mapped. Forest elevations exceed 1000 m, but the majority of these failures were found between 600 and 800 m in elevation. This appears to be the area where there is sufficient concentration of subsurface water to result in excess pore pressures. The high percentage of slope failures in the 600-800-m range, relative to the percentage at higher elevations, suggests that differences in soil-water processes are responsible for the form of these mountain slopes. Steep linear segments are maintained at higher elevations. Slope angles are reduced in the 600-800-m range by frequent shallow slides, creating a largely concave surface. In combination, slope segments above 800 m, and those between 600 and 800 m, produce the characteristic form of the mountains of eastern Puerto Rico. ?? 1990.

Geomorphology↗
USGS2006

Ge/Si and 87Sr/86Sr tracers of weathering reactions and hydrologic pathways in a tropical granitoid system

Ge/Si and 87Sr/86Sr data from primary and secondary minerals, soil waters, and stream waters in a tropical granitoid catchment quantitatively reflect mineral alteration reactions that occur at different levels within the bedrock-saprolite-soil zone. Near the bedrock-saprolite interface, plagioclase to kaolinite reaction yields low Ge/Si and 87Sr/86Sr. Higher in the regolith column, biotite weathering and kaolinite dissolution drive Ge/Si and 87Sr/86Sr to high values. Data from streams at base flow sample the bedrock-saprolite interface zone, while at high discharge solutes are derived from upper saprolite-soil zone. Coupled Ge/Si and 87Sr/86Sr can be effective tools for quantifying the importance of specific weathering reactions, and for geochemical hydrograph separation. ?? 2005 Elsevier B.V. All rights reserved.

Journal of Geochemical Exploration↗
USGS2001

Differential rates of feldspar weathering in granitic regoliths

Differential rates of plagioclase and K-feldspar weathering commonly observed in bedrock and soil environments are examined in terms of chemical kinetic and solubility controls and hydrologic permeability. For the Panola regolith, in the Georgia Piedmont Province of southeastern United States, petrographic observations, coupled with elemental balances and 87Sr/86Sr ratios, indicate that plagioclase is being converted to kaolinite at depths > 6 m in the granitic bedrock. K-feldspar remains pristine in the bedrock but subsequently weathers to kaolinite at the overlying saprolite. In contrast, both plagioclase and K-feldspar remain stable in granitic bedrocks elsewhere in Piedmont Province, such as Davis Run, Virginia, where feldspars weather concurrently in an overlying thick saprolite sequence. Kinetic rate constants, mineral surface areas, and secondary hydraulic conductivities are fitted to feldspar losses with depth in the Panola and Davis Run regoliths using a time-depth computer spreadsheet model. The primary hydraulic conductivities, describing the rates of meteoric water penetration into the pristine granites, are assumed to be equal to the propagation rates of weathering fronts, which, based on cosmogenic isotope dating, are 7 m/106 yr for the Panola regolith and 4 m/106 yr for the Davis Run regolith. Best fits in the calculations indicate that the kinetic rate constants for plagioclase in both regoliths are factors of two to three times faster than K-feldspar, which is in agreement with experimental findings. However, the range for plagioclase and K-feldspar rates (kr = 1.5 x 10-17 to 2.8 x 10-16 mol m-2 s-1) is three to four orders of magnitude lower than for that for experimental feldspar dissolution rates and are among the slowest yet recorded for natural feldspar weathering. Such slow rates are attributed to the relatively old geomorphic ages of the Panola and Davis Run regoliths, implying that mineral surface reactivity decreases significantly with time. Differential feldspar weathering in the low-permeability Panola bedrock environment is more dependent on relative feldspar solubilities than on differences in kinetic reaction rates. Such weathering is very sensitive to primary and secondary hydraulic conductivities (qp and qs), which control both the fluid volumes passing through the regolith and the thermodynamic saturation of the feldspars. Bedrock permeability is primarily intragranular and is created by internal weathering of networks of interconnected plagioclase phenocrysts. Saprolite permeability is principally intergranular and is the result of dissolution of silicate phases during isovolumetric weathering. A secondary to primary hydraulic conductivity ratio of qs/qp = 150 in the Panola bedrock results in kinetically controlled plagioclase dissolution but thermodynamically inhibited K-feldspar reaction. This result is in accord with calculated chemical saturation states for groundwater sampled in the Panola Granite. In contrast, greater secondary conductivities in the Davis Run saprolite, qs/qp = 800, produces both kinetically controlled plagioclase and K-feldspar dissolution. Faster plagioclase reaction, leading to bedrock weathering in the Panola Granite but not at Davis Run, is attributed to a higher anorthite component of the plagioclase and a wetter and warmer climate. In addition, the Panola Granite has an abnormally high content of disseminated calcite, the dissolution of which precedes the plagioclase weathering front, thus creating additional secondary permeability. Copyright ?? 2001 Elsevier Science Ltd.

Geochimica et Cosmochimica Acta↗
USGS1998

Chemical weathering in a tropical watershed, Luquillo Mountains, Puerto Rico: I. Long-term versus short-term weathering fluxes

The pristine Rio Icacos watershed in the Luquillo Mountains in eastern Puerto Rico has the fastest documented weathering rate of silicate rocks on the Earth's surface. A regolith propagation rate of 58 m Ma-1 calculated from iso-volumetric saprolite formation from quartz diorite, is comparable to the estimated denudation rate (25-50 Ma-1) but is an order of magnitude faster than the global average weathering rate (6 Ma-1). Weathering occurs in two distinct environments; plagioclase and hornblende react at the saprock interface and biotite and quartz weather in the overlying thick saprolitic regolith. These environments produce distinctly different water chemistries, with K, Mg, and Si increasing linearly with depth in saprolite porewaters and with stream waters dominated by Ca, Na, and Si. Such differences are atypical of less intense weathering in temperate watersheds. Porewater chemistry in the shallow regolith is controlled by closed-system recycling of inorganic nutrients such as K. Long-term elemental fluxes through the regolith (e.g., Si = 1.7 ?? 10-8 moles m-2 s-1) are calculated from mass losses based on changes in porosity and chemistry between the regolith and bedrock and from the age of the regolith surface (200 Ma). Mass losses attributed to solute fluxes are determined using a step-wise infiltration model which calculates mineral inputs to the shallow and deep saprolite porewaters and to stream water. Pressure heads decrease with depth in the shallow regolith (-2.03 m H2O m-1), indicating that both increasing capillary tension and graviometric potential control porewater infiltration. Interpolation of experimental hydraulic conductivities produces an infiltration rate of 1 m yr-1 at average field moisture saturation which is comparable with LiBr tracer tests and with base discharge from the watershed. Short term weathering fluxes calculated from solute chemistries and infiltration rates (e.g., Si = 1.4 ?? 10-8 moles m-2 s-1) are compared to watershed flux rates (e.g., Si = 2.7 ?? 10-8 moles m-2 s-1). Consistency between three independently determined sets of weathering fluxes imply that possible changes in precipitation, temperature, and vegetation over the last several hundred thousand years have not significantly impacted weathering rates in the Luquillo Mountains of Puerto Rico. This has important ramifications for tropical environments and global climate change. Copyright ?? 1998 Elsevier Science Ltd.

Geochimica et Cosmochimica Acta↗
USGS1971

Residual enrichment and supergene transport of gold, Calhoun mine, Lumpkin County, Georgia

Gold is present in weathered wall rock and quartz veins of the opencut of the Calhoun mine, Lumpkin County, Georgia. Eleven samples of mica schist saprolite contain 0.02 to 0.1 parts per million (ppm) gold and three samples of weathered vein quartz, 0.04 to 0.6 ppm (limit of detection is 0.02 ppm). Gold was not found in any of the 18 samples of fresh mica schist and was found in only 3 of 16 samples of fresh vein quartz from underground workings 40-100 feet below the opencut. Whole-rock chemical analyses of the unweathered schist and schist saprolite show large losses of minor elements and addition of water during weathering. The average specific gravity of the unweathered schist is 2.8 and of the schist saprolite, 1.65. The chemical analyses recalculated to weight per volume show a loss during weathering of large amounts of all major constituents including silica, alumina, and total iron. Of the minor elements, gold and arsenic show the most residual enrichment, but boron, beryllium, cobalt, lanthanum, niobium, nickel, lead, zinc, and zirconium show some enrichment in the saprolite as compared with the fresh rock. Most of the other minor elements have been at least partly removed, the greatest loss being shown by calcium, potassium, magnesium, sodium, and strontium. Fresh limonite coating the wall of the adit contains 2.9 ppm gold and appreciable amounts of these elements leached from the schist, particularly barium, calcium, and manganese. Some layers of unweathered schist contain as much as 1 percent gold-bearing pyrite and may have a gold content of 0.01 and 0.02 ppm, or just at or below the limit of detection. Loss of 30 to 45 percent of the rock during weathering increases the gold content above the lower limit of detection. The gold in recently deposited limonite shows that some gold is also being transported with iron during weathering. If a concentration of limonite were found near the water table, it might be expected to show supergene enrichment in gold.

Georgia↗
USGS2004

Hydrogeologic controls on ground-water discharge to the Washington METRO subway tunnel near the Medical Center station and Crossover, Montgomery County, Maryland

Excessive water intrusion has been observed inside several of the Washington Metropolitan Area Transit Authority subway tunnels, with the worst leakage occurring along the Red Line tunnels and stations north of Dupont Circle in Washington, D.C. These tunnels were constructed in bedrock that contains permeable (water-bearing) joints and fractures. Excessive water leakage through the walls and water inside the underground facilities has damaged mechanical and electrical components in the tunnel, and has escalated the deterioration rate of the rail system. The U.S. Geological Survey and the Washington Metropolitan Area Transit Authority have worked cooperatively on a study from 200003 to describe and quantify the factors controlling ground-water flow into the Red Line subway tunnel near the Medical Center Station and Crossover in Montgomery County, Maryland. The Red Line near the Medical Center Station and Crossover passes through or beneath the gneissic Sykesville Formation and the biotite-hornblende tonalite member of the Georgetown Intrusive Suite, both of which contain numerous fractures. The mapped foliation and joints of the Sykesville Formation in the vicinity of the Medical Center Station and Crossover are generally orientated north-south. Fractures in the Sykesville Formation in outcrops appear to be poorly connected. In the biotite-hornblende tonalite member of the Georgetown Intrusive Suite, the general orientation of the mapped foliation and joints is east-west. In contrast to the fractures in the Sykesville Formation, the fractures in the Georgetown Intrusive Suite in outcrops appear to be more numerous and have a greater degree of connectivity. Fractures intersecting four bedrock wells near the Medical Center Station and Crossover that were drilled into the biotite-hornblende tonalite member of the Georgetown Intrusive Suite show an east-west orientation matching the foliation and joints shown on geologic maps. The excessive water intrusion at the Medical Center Station and Crossover could be the result of its location within the Georgetown Intrusive Suite. The abrupt changes in the mapped directions of ground-water flow based on the hydraulic heads at the contact between the Sykesville Formation and biotite-hornblende tonalite member of the Georgetown Intrusive Suite could also be the result of the change in fracturing between these two lithologies. Saprolite, a residual of soft, red/brown to gray clay from decomposed crystalline rock, overlies the bedrock and varies from about 20 to 55 feet thick, depending on location. On the basis of a slug test conducted in the lower part of the saprolite near the Medical Center Station and Crossover, transmissivity and storativity of the saprolite were estimated to be 10 feet squared per day and 10-6 , respectively. The transmissivity of fractures intersecting bedrock boreholes drilled in the biotite-hornblende tonalite member of the Georgetown Intrusive Suite varies over five orders of magnitude, from a maximum of approximately 10 feet squared per day to the detection limit of the in situ testing apparatus, which is approximately 10-4 feet squared per day. In general, the transmissivity of fractures intersecting the boreholes increases with depth. The low transmissivity of bedrock fractures in close proximity to the saprolite is likely to be caused by the fractures being filled with byproducts of rock weathering, resulting in reduced permeability. 2 Hydrogeologic Controls on Ground-Water Discharge to the Washington METRO Subway Tunnel The bulk transmissivity of the bedrock aquifer is approximately 3.7 feet squared per day, as determined from an aquifer test conducted by pumping a 240-foot-deep borehole and monitoring the drawdown over 3 days in the pumped borehole and several observation boreholes. In general, the hydraulic head decreases with depth in bedrock boreholes, indicating the potential for downward ground-water flow. Based on hydraulic head values mea

Water-Resources Investigations Report↗
USGS2004

Geochemistry of glacial sediments in the area of the Bend massive sulfide deposit, north-central Wisconsin

Geochemical exploration in northern Wisconsin has been problematic because of thick glacial overburden and complex stratigraphic record of glacial history. To assess till geochemical exploration in an area of thick glacial cover and complex stratigraphy samples of glacial materials were collected from cores from five rotasonic boreholes near a known massive sulfide deposit, the Bend deposit in north-central Wisconsin. Diamond drilling in the Bend area has defined a long, thin zone of mineralization at least partly intersected at the bedrock surface beneath 30-40 m of unconsolidated glacial sediments. The bedrock surface has remnant regolith and saprolite resulting from pre-Pleistocene weathering. Massive sulfide and mineralized rock collected from diamond drill core from the deposit contain high (10s to 10,000s ppm) concentrations of Ag, As, Au, Bi, Cu, Hg, Se, Te, and Tl. Geochemical properties of the glacial stratigraphic units helped clarify the sequence and source areas of several glacial ice advances preserved in the section. At least two till sheets are recognized. Over the zone of mineralization, saprolite and preglacial alluvial and lacustrine samples are preserved on the bedrock surface in a paleoriver valley. The overlying till sheet is a gray, silty carbonate till with a source hundreds of kilometers to the northwest of the study area. This gray till is overlain by red, sandy till with a source to the north in Proterozoic rocks of the Lake Superior area. The complex glacial stratigraphy confounds down-ice geochemical till exploration. The presence of remnant saprolite, preglacial sediment, and far-traveled carbonate till minimized glacial erosion of mineralized material. As a result, little evidence of down-ice glacial dispersion of lithologic or mineralogic indicators of Bend massive sulfide mineralization was found in the samples from the rotasonic cores. This study points out the importance of determining glacial stratigraphy and history, and identifying favorable lithologies required for geochemical exploration. Drift prospecting in Wisconsin and other areas near the outer limits of the Pleistocene ice sheets may not be unsuccessful, in part, because of complex stratigraphic sequences of multiple glaciations where deposition dominates over erosion. ?? 2004 Elsevier B.V. All rights reserved.

Journal of Geochemical Exploration↗
USGS1994

Hydrogeologic characterization of a proposed landfill expansion in Pickens County near Easley, South Carolina

This report presents the results of a hydrogeologic study in the Piedmont physiographic province of South Carolina to obtain geologic, hydrologic, and water-quality data from the site of a proposed landfill expansion in Pickens County near Easley, South Carolina. The geology of the study area is typical of the Piedmont region. The unconsolidated regolith on the site is soil and saprolite, which is a product of the weathered parent rock. The soil ranges in thickness from about 5 to 20 feet. The saprolite ranges in thickness from about 5 to 134 feet. The most abundant parent rock type in the area is a biotite gneiss. Ground- and surface-water data were collected at the site. Slug tests on the saprolite indicate a mean hydraulic conductivity of 3 x 0.000003 feet per second. Transmissivity ranges from 12 to 27 cubic feet per day per feet (squared per day). The ground-water velocity for the site ranges from 3 to 6 feet per year. The closest major stream to the site is Golden Creek. Based on low-flow data for Golden Creek, the estimated minimum 7 consecutive day flow that has a recurrence interval of 10 years (7Q10) at station 02186102 is 2.4 cubic feet per second. Water samples were collected from five monitoring wells at the proposed landfill expansion site and from one stream adjacent to the expansion site. Measured pH units ranged from 5.5 to 8.1, and alkalinity concentrations ranged from 5.1 to 73 milligrams per liter as CaCO3. Other water- quality data obtained included temperature and specific conductance, and 5-day BOD (biochemical oxygen demand), bicarbonate, ammonia-nitrogen, nitrite-nitrogen, nitrite plus nitrate, organic carbon, calcium, magnesium, sodium, potassium, chloride, sulfate, fluoride, and selected trace metal concentrations.

South Carolina↗
USGS1989

Appalachian Piedmont landscapes from the Permian to the Holocene

Between the Potomac and Susquehanna Rivers and from the Blue Ridge to the Fall Zone, landscapes of the Piedmont are illustrated for times in the Holocene, Late Wisconsin, Early Miocene, Early Cretaceous, Late Triassic, and Permian. Landscape evolution took place in tectonic settings marked by major plate collisions (Permian), arching and rifting (Late Triassic) and development of the Atlantic passive margin by sea floor spreading (Early Cretaceous). Erosion proceeded concurrently with tectonic uplift and continued after cessation of major tectonic activity. Atlantic Outer Continental Shelf sediments record three major erosional periods: (1) Late Triassic-Early Jurassic; (2) Late Jurassic-Early Cretaceous; and (3) Middle Miocene-Holocene. The Middle Miocene-Holocene pulse is related to neotectonic activity and major climatic fluctuations. In the Piedmont upland the Holocene landscape is interpreted as an upland surface of low relief undergoing dissection. Major rivers and streams are incised into a landscape on which the landforms show a delicate adjustment to rock lithologies. The Fall Zone has apparently evolved from a combination of warping, faulting, and differential erosion since Late Miocene. The periglacial environment of the Late Wisconsin (and earlier glacial epochs) resulted in increased physical erosion and reduced chemical weathering. Even with lowered saprolitization rates, geochemical modeling suggests that 80 m or more of saprolite may have formed since Late Miocene. This volume of saprolite suggests major erosion of upland surfaces and seemingly contradicts available field evidence. Greatly subdued relief characterized the Early Miocene time, near the end of a prolonged interval of tropical morphogenesis. The ancestral Susquehanna and Potomac Rivers occupied approximately their present locations. In Early Cretaceous time local relief may have been as much as 900 m, and a major axial river draining both the Piedmont and Appalachians flowed southeast past Baltimore. The Late Triassic landscape was influenced by rift basin development. Streams drained into a hydrologically closed basin: no through-flowing rivers seem to have been present. A limestone escarpment along the Blue Ridge may have existed as a consequence of a semi-arid climate. The Permian may have been a time of Himalayan-like mountains and mountain glaciers. Streams (and glaciers) generally flowed southwest and west. ?? 1989.

Geomorphology↗
USGS2022

Biofilms in the Critical Zone: Distribution and mediation of processes

Microbial biofilms occur in all levels of the Critical Zone (CZ); they are on and in the vegetation, throughout the soil-saprolite zone, and along fractures in deep subsurface. Here we discuss biofilms in each level of the CZ with a focus in the soil-saprolite continuum. We show how scanning electron microscope (SEM) images provide an appropriate scale to explore microbe mineral interactions in the CZ and can be used without extensive sample preparation. Through SEM imaging, we show that biofilms weather primary minerals, that macropores and fractures are hotspots of biofilm development, that biologic precipitation of short-range-order minerals (SROs) occurs in biofilms, and that biofilms are important in the process of organic matter stabilization.

Book chapter↗
USGS2017

Ion-adsorption REEs in regolith of the Liberty Hill pluton, South Carolina, USA: An effect of hydrothermal alteration

Ion-adsorbed rare earth element (REE) deposits supply the majority of world heavy REE production and substantial light REE production, but relatively little is known of their occurrence outside Southeast Asia. We examined the distribution and forms of REEs on a North American pluton located in the highly weathered and slowly eroding South Carolina Piedmont. The Hercynian Liberty Hill pluton experiences a modern climate that includes ~ 1500 mm annual rainfall and a mean annual temperature of 17 °C. The pluton is medium- to coarse-grained biotite-amphibole granite with minor biotite granite facies. REE-bearing phases are diverse and include monazite, zircon, titanite, allanite, apatite and bastnäsite. Weathered profiles were sampled up to 7 m-deep across the ~ 400 km 2 pluton. In one profile, ion-adsorbed REEs plus yttrium (REE + Y) ranged up to 581 mg/kg and accounted for up to 77% of total REE + Y in saprolite. In other profiles, ion-adsorbed REE + Y ranged 12–194 mg/kg and only accounted for 3–37% of totals. The profile most enriched in ion-adsorbed REEs was located along the mapped boundary of two granite facies and contained trioctahedral smectite in the saprolite, evidence suggestive of hydrothermal alteration of biotite at that location. Post-emplacement deuteric alteration can generate easily weathered REE phases, particularly fluorocarbonates. In the case of Liberty Hill, hydrothermal alteration may have converted less soluble to more soluble REE minerals. Additionally, regolith P content was inversely correlated with the fraction ion-adsorbed REEs, and weathering related secondary REE-phosphates were found in some regolith profiles. Both patterns illustrate how low P content aids in the accumulation of ion-adsorbed REEs. The localized occurrence at Liberty Hill sheds light on conditions and processes that generate ion-adsorbed REEs.

South Carolina↗
USGS2007

Differentiating pedogenesis from diagenesis in early terrestrial paleoweathering surfaces formed on granitic composition parent materials

Unconformable surfaces separating Precambrian crystalline basement and overlying Proterozoic to Cambrian sedimentary rocks provide an exceptional opportunity to examine the role of primitive soil ecosystems in weathering and resultant formation of saprolite (weathered rock retaining rock structure) and regolith (weathered rock without rock structure), but many appear to have been affected by burial diagenesis and hydrothermal fluid flow, leading some researchers to discount their suitability for such studies. We examine one modern weathering profile (Cecil series), four Cambrian paleoweathering profiles from the North American craton (Squaw Creek, Franklin Mountains, Core SQ-8, and Core 4), one Neoproterozoic profile (Sheigra), and one late Paleoproterozoic profile (Baraboo), to test the hypothesis that these paleoweathering profiles do provide evidence of primitive terrestrial weathering despite their diagenetic and hydrothermal overprinting, especially additions of potassium. We employ an integrated approach using (1) detailed thin-section investigations to identify characteristic pedogenic features associated with saprolitization and formation of well-drained regoliths, (2) electron microprobe analysis to identify specific weathered and new mineral phases, and (3) geochemical mass balance techniques to characterize volume changes during weathering and elemental gains and losses of major and minor elements relative to the inferred parent materials. There is strong pedogenic evidence of paleoweathering, such as clay illuviation, sepic-plasmic fabrics, redoximorphic features, and dissolution and alteration of feldspars and mafic minerals to kaolinite, gibbsite, and Fe oxides, as well as geochemical evidence, such as whole-rock losses of Na, Ca, Mg, Si, Sr, Fe, and Mn greater than in modern profiles. Evidence of diagenesis includes net additions of K, Ba, and Rb determined through geochemical mass balance, K-feldspar overgrowths in overlying sandstone sections, and K-feldspars with reaction rims in weathered basement. The sub-Cambrian paleoweathering profiles formed on granite are remarkably similar to modern weathering profiles formed on granite, in spite of overprinting by potassium diagenesis. ?? 2007 by The University of Chicago. All rights reserved.

Journal of Geology↗