Search USGS⌕ Search

SEARCH · Search USGS

Results for “Research Square”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2Linked to original sources

High-resolution geophysical data collected within Red Brook Harbor, Buzzards Bay, Massachusetts, in 2009

The U.S. Geological Survey conducted a high-resolution geophysical survey within Red Brook Harbor, Massachusetts, from September 28 through November 17, 2009. Red Brook Harbor is located on the eastern edge of Buzzards Bay, south of the Cape Cod Canal. The survey area was approximately 7 square kilometers, with depths ranging from 0 to approximately 10 meters. Data were collected aboard the U.S. Geological Survey Research Vessel Rafael. The research vessel was equipped with a 234-kilohertz interferometric sonar system to collect bathymetry and backscatter data, a dual frequency (3.5- and 200-kilohertz) compression high-intensity radar pulse seismic reflection profiler to collect subbottom data, a sound velocity profiler to acquire speed of sound within the water column, and a sea floor sampling device to collect sediment samples, video, and photographs. The survey was part of an ongoing cooperative effort between the U.S. Geological Survey and the Massachusetts Office of Coastal Zone Management to map the geology of the Massachusetts inner continental shelf. In addition to inclusion within the cooperative geologic mapping effort, these data will be used to assess the shallow-water mapping capability of the geophysical systems deployed for this project, with an emphasis on identifying resolution benchmarks for the interferometric sonar system.

Massachusetts↗

Development of demographic models to analyze populations with multi-year data—Using Agassiz’s Desert Tortoise (Gopherus agassizii) as a case study

We developed a model for analyzing multi-year demographic data for long-lived animals and used data from a population of Agassiz’s desert tortoise ( Gopherus agassizii ) at the Desert Tortoise Research Natural Area in the western Mojave Desert of California as a case study. The study area was 7.77 square kilometers and included two locations: inside and outside the fenced boundary. The wildlife-permeable, protective fence was designed to prevent entry from vehicle users and sheep grazing. We collected mark-recapture data from 1,123 tortoises during seven annual surveys consisting of two censuses each over a 34-year period. Additional data were collected when marked tortoises were recovered dead and removed between survey years. We used a Bayesian modeling framework to develop a multistate Jolly-Seber model because of its ability to handle unobserved (latent) states and modified this model to incorporate the additional data from non-survey years. Three size-age states (juvenile, immature, adult), sex (female, male), two location states (inside and outside the fenced boundary), and three survival states (not-yet-entered, entered/alive, and dead/removed) were incorporated into the model. We calculated population densities and estimated probabilities of growth of the tortoises from one size-age state to a larger size-age state, survival after 1 year and 5 years, and detection. Our results show a declining population with low estimates for survival after 1 year and 5 years. The probability for tortoises to move from outside to inside the boundary fence was greater than for tortoises to move from inside the fence to outside. The probability for detecting tortoises differed by size-age state and was lowest for the smallest tortoises and highest for the adult tortoises. The framework for the model can be used to analyze other animal populations where vital rates are expected to vary depending on multiple individual states.

Open-File Report↗

Cumulative uncertainty in measured streamflow and water quality data for small watersheds

The scientific community has not established an adequate understanding of the uncertainty inherent in measured water quality data, which is introduced by four procedural categories: streamflow measurement, sample collection, sample preservation/storage, and laboratory analysis. Although previous research has produced valuable information on relative differences in procedures within these categories, little information is available that compares the procedural categories or presents the cumulative uncertainty in resulting water quality data. As a result, quality control emphasis is often misdirected, and data uncertainty is typically either ignored or accounted for with an arbitrary margin of safety. Faced with the need for scientifically defensible estimates of data uncertainty to support water resource management, the objectives of this research were to: (1) compile selected published information on uncertainty related to measured streamflow and water quality data for small watersheds, (2) use a root mean square error propagation method to compare the uncertainty introduced by each procedural category, and (3) use the error propagation method to determine the cumulative probable uncertainty in measured streamflow, sediment, and nutrient data. Best case, typical, and worst case data quality scenarios were examined. Averaged across all constituents, the calculated cumulative probable uncertainty (%) contributed under typical scenarios ranged from 6% to 19% for streamflow measurement, from 4% to 48% for sample collection, from 2% to 16% for sample preservation/storage, and from 5% to 21% for laboratory analysis. Under typical conditions, errors in storm loads ranged from 8% to 104% for dissolved nutrients, from 8% to 110% for total N and P, and from 7% to 53% for TSS. Results indicated that uncertainty can increase substantially under poor measurement conditions and limited quality control effort. This research provides introductory scientific estimates of uncertainty in measured water quality data. The results and procedures presented should also assist modelers in quantifying the quality of calibration and evaluation data sets, determining model accuracy goals, and evaluating model performance.

Transactions of the ASABE↗

Hurricane hazards — A national threat

Hurricanes bring destructive winds, storm surge, torrential rain, flooding, and tornadoes. A single storm can wreak havoc on coastal and inland communities and on natural areas over thousands of square miles. In 2005, Hurricanes Katrina, Rita, and Wilma demonstrated the devastation that hurricanes can inflict and the importance of hurricane hazards research and preparedness. More than half of the U.S. population lives within 50 miles of a coast, and this number is increasing. Many of these areas, especially the Atlantic and Gulf coasts, will be in the direct path of future hurricanes. Hawaii is also vulnerable to hurricanes.

Fact Sheet↗

Overview of ground-water recharge study sites

Multiyear studies were done to examine meteorologic and hydrogeologic controls on ephemeral streamflow and focused ground-water recharge at eight sites across the arid and semiarid southwestern United States. Campaigns of intensive data collection were conducted in the Great Basin, Mojave Desert, Sonoran Desert, Rio Grande Rift, and Colorado Plateau physiographic areas. During the study period (1997 to 2002), the southwestern region went from wetter than normal conditions associated with a strong El Niño climatic pattern (1997–1998) to drier than normal conditions associated with a La Niña climatic pattern marked by unprecedented warmth in the western tropical Pacific and Indian Oceans (1998–2002). The strong El Niño conditions roughly doubled precipitation at the Great Basin, Mojave Desert, and Colorado Plateau study sites. Precipitation at all sites trended generally lower, producing moderate- to severe-drought conditions by the end of the study. Streamflow in regional rivers indicated diminishing ground-water recharge conditions, with annual-flow volumes declining to 10–46 percent of their respective long-term averages by 2002. Local streamflows showed higher variability, reflecting smaller scales of integration (in time and space) of the study-site watersheds. By the end of the study, extended periods (9–15 months) of zero or negligible flow were observed at half the sites. Summer monsoonal rains generated the majority of streamflow and associated recharge in the Sonoran Desert sites and the more southerly Rio Grande Rift site, whereas winter storms and spring snowmelt dominated the northern and westernmost sites. Proximity to moisture sources (primarily the Pacific Ocean and Gulf of California) and meteorologic fluctuations, in concert with orography, largely control the generation of focused ground-water recharge from ephemeral streamflow, although other factors (geology, soil, and vegetation) also are important. Watershed area correlated weakly with focused infiltration volumes, the latter providing an upper bound on associated ground-water recharge. Estimates of annual focused infiltration for the research sites ranged from about 10 5 to 10 7 cubic meters from contributing areas that ranged from 26 to 2,260 square kilometers.

Professional Paper↗

A conceptual model of ground-water flow in the eastern Snake River Plain aquifer at the Idaho National Laboratory and vicinity with implications for contaminant transport

Ground-water flow in the west-central part of the eastern Snake River Plain aquifer is described in a conceptual model that will be used in numerical simulations to evaluate contaminant transport at the Idaho National Laboratory (INL) and vicinity. The model encompasses an area of 1,940 square miles (mi2) and includes most of the 890 mi2 of the INL. A 50-year history of waste disposal associated with research activities at the INL has resulted in measurable concentrations of waste contaminants in the aquifer. A thorough understanding of the fate and movement of these contaminants in the subsurface is needed by the U.S. Department of Energy to minimize the effect that contaminated ground water may have on the region and to plan effectively for remediation. Three hydrogeologic units were used to represent the complex stratigraphy of the aquifer in the model area. Collectively, these hydrogeologic units include at least 65 basalt-flow groups, 5 andesite-flow groups, and 61 sedimentary interbeds. Three rhyolite domes in the model area extend deep enough to penetrate the aquifer. The rhyolite domes are represented in the conceptual model as low permeability, vertical pluglike masses, and are not included as part of the three primary hydrogeologic units. Broad differences in lithology and large variations in hydraulic properties allowed the heterogeneous, anisotropic basalt-flow groups, andesite-flow groups, and sedimentary interbeds to be grouped into three hydrogeologic units that are conceptually homogeneous and anisotropic. Younger rocks, primarily thin, densely fractured basalt, compose hydrogeologic unit 1; younger rocks, primarily of massive, less densely fractured basalt, compose hydrogeologic unit 2; and intermediate-age rocks, primarily of slightly-to-moderately altered, fractured basalt, compose hydrogeologic unit 3. Differences in hydraulic properties among adjacent hydrogeologic units result in much of the large-scale heterogeneity and anisotropy of the aquifer in the model area, and differences in horizontal and vertical hydraulic conductivity in individual hydrogeologic units result in much of the small-scale heterogeneity and anisotropy of the aquifer in the model area. The inferred three-dimensional geometry of the aquifer in the model area is very irregular. Its thickness generally increases from north to south and from west to east and is greatest south of the INL. The interpreted distribution of older rocks that underlie the aquifer indicates large changes in saturated thickness across the model area. The boundaries of the model include physical and artificial boundaries, and ground-water flows across the boundaries may be temporally constant or variable and spatially uniform or nonuniform. Physical boundaries include the water-table boundary, base of the aquifer, and northwest mountain-front boundary. Artificial boundaries include the northeast boundary, southeast-flowline boundary, and southwest boundary. Water flows into the model area as (1) underflow (1,225 cubic feet per second (ft3/s)) from the regional aquifer (northeast boundary-constant and nonuniform), (2) underflow (695 ft3/s) from the tributary valleys and mountain fronts (northwest boundary-constant and nonuniform), (3) precipitation recharge (70 ft3/s) (constant and uniform), streamflow-infiltration recharge (95 ft3/s) (variable and nonuniform), wastewater return flows (6 ft3/s) (variable and nonuniform), and irrigation-infiltration recharge (24 ft3/s) (variable and nonuniform) across the water table (water-table boundary-variable and nonuniform), and (4) upward flow across the base of the aquifer (44 ft3/s) (uniform and constant). The southeast-flowline boundary is represented as a no-flow boundary. Water flows out of the model area as underflow (2,037 ft3/s) to the regional aquifer (southwest boundary-variable and nonuniform) and as ground-water withdrawals (45 ft3/s) (water table boundary-variable and nonuniform). Ground-water flow i

Scientific Investigations Report↗

Assessment of peak flow scaling and Its effect on flood quantile estimation in the United Kingdom

Regional flood frequency analysis (RFFA) methods are essential tools to assess flood hazard and plan interventions for its mitigation. They are used to estimate flood quantiles when the at‐site record of streamflow data is not available or limited. One commonly used RFFA method is the index flood method (IFM), which assumes that peak floods satisfy the simple scaling hypothesis. In this work we present an integrated approach to assess the spatial scaling behavior of floods in the United Kingdom (UK) for 540 catchments, where the IFM is currently used operationally. This assessment employs product moments, probability weighted moments, and quantile analysis, and is applied to two different types of “hydrologically homogeneous” UK regions: geographical regions as defined in the Flood Studies Report (NERC, 1975) and pooling‐groups as defined in the updated Flood Estimation Handbook (FEH; Institute of Hydrology, 1999). To understand which variables play a significant role in the flood‐peak generating mechanism, the assessment approach considers scaling not only of drainage area alone but also of other hydro‐geomorphological variables. Results provided by the different methodologies consistently showed that only part (ranging from 30% to 70%) of the peak flow variability is explained by drainage area alone; this fraction increases (up to 80%–95%) when multiple regression is used. Supported by the peak flow spatial scaling assessment, we compared the proposed approach for peak flow quantile estimation with the current FEH method in ungauged catchments. The quantile regression method based on the pooling‐group outperforms the current FEH‐ungauged method, providing a 14% relative improvement in root mean square error over the entire country.

Water Resources Research↗

Interstation correlation of peak-flow estimates

Equations are given for using the correlation coefficient between annual peaks at a pair of stream gaging stations to estimate the interstation correlation coefficient of estimated T -year peaks, computed standard deviations, and computed skew coefficients at the same pair of stations. The equations are based on statistics computed from samples of annual peaks simulated from normal distributions with built-in interstation correlation. The interstation correlation of 50- year peaks was found to be about equal to the square of the interstation correlation coefficient of the annual peaks.

Journal of Research of the U.S. Geological Survey↗

Calibration and intercomparison of acetic acid measurements using proton transfer reaction mass spectrometry (PTR-MS)

Acetic acid is one of the most abundant organic acids in the ambient atmosphere, with maximum mixing ratios reaching into the tens of parts per billion by volume (ppbv) range. The identities and associated magnitudes of the major sources and sinks for acetic acid are poorly characterized, due in part to the limitation in available measurement techniques. This paper demonstrates that Proton Transfer Reaction Mass Spectrometry (PTR-MS) can reliably quantify acetic acid vapor in ambient air. Three different PTR-MS configurations were calibrated at low ppbv mixing ratios using permeation tubes, which yielded calibration factors between 7.0 and 10.9 normalized counts per second per ppbv (ncps ppbv −1 ) at a drift tube field strength of 132 townsend (Td). Detection limits ranged from 0.06 to 0.32 ppbv with dwell times of 5 s. These calibration factors showed negligible humidity dependence. Using the experimentally determined calibration factors, PTR-MS measurements of acetic acid during the International Consortium for Atmospheric Research on Transport and Transformation (ICARTT) campaign were validated against results obtained using Mist Chambers coupled with Ion Chromatography (MC/IC). An orthogonal least squares linear regression of paired data yielded a slope of 1.14 ± 0.06 (2σ), an intercept of 0.049 ± 20 (2σ) ppbv, and an R 2 of 0.78. The median mixing ratio of acetic acid on Appledore Island, ME during the ICARTT campaign was 0.530 ± 0.025 ppbv with a minimum of 0.075 ± 0.004 ppbv, and a maximum of 3.555 ± 0.171 ppbv.

Atmospheric Measurement Techniques↗

Summary report of the sediments, structural framework, petroleum potential, environmental conditions, and operational considerations of the United States Mid-Atlantic Continental Shelf

This report was compiled in response to Bureau of Land Management memorandum 3310 #49(722) which requested the U.S. Geological Survey to summarize the aeoloay, potential mineral resources, estimated oil and gas resources, potential environmental hazards, and operational considerations for proposed oil and gas Lease Sale #49 on the United States Mid-Atlantic continental shelf. Researchers from academic institutions, government agencies, and industry have studied the area. It is from their published knowledge and from ongoing U.S. Geological Survey research and field projects that this synthesis was made. The area under consideration for proposed oil and aas Lease Sale #49 is approximately 103,000 square kilometres (fig. 1). The landward limit of the proposed sale area is the 3-mile offshore boundary and the seaward limit is the 1,000 metre bathymetric contour. In the central part of the proposed sale area are 154 federal tracts (fig. 1) which will be up for lease in Sale #40 planned for late summer of 1976. Those tracts not leased in Sale #40 will be included in Sale #49. A glossary of geologic terms used in the text and a geologic time scale are included in the appendix at the back of this report.

Open-File Report↗

Blackbrush ( Coleogyne ramosissima Torr. ): State of our knowledge and future challenges

Covering 130,000 square miles and a wide range of elevations from desert to alpine in Arizona, Utah, Colorado, and New Mexico, the Colorado Plateau has long fascinated researchers. The Colorado Plateau VI provides readers with a plethora of updates and insights into land conservation and management questions currently surrounding the region. The Colorado Plateau VI’s contributors show how new technologies for monitoring, spatial analysis, restoration, and collaboration improve our understanding, management, and conservation of outcomes at the appropriate landscape scale for the Colorado Plateau. The volume’s chapters fall into five major themes: monitoring as a key tool for addressing management challenges, restoration approaches to improving ecosystem condition and function, collaboration and organizational innovations to achieve conservation and management objectives, landscape-scale approaches to understanding, and managing key species and ecological communities. Focusing on the integration of science into resource management issues over the Colorado Plateau, this volume includes contributions from dozens of leading scholars of the region. The Colorado Plateau VI proves a valuable resource to all interested in the conservation management, natural history, and cultural biological resources of the Colorado Plateau.

Arizona, Colorado, New Mexico, Utah↗

Swatara Creek basin of southeastern Pennsylvania: An evaluation of its hydrologic system

Local concentrations of population in the Swatara Creek basin of Pennsylvania find it necessary to store, transport, and treat water because local supplies are either deficient or have been contaminated by disposal of wastes in upstream areas. Water in the basin is available for the deficient areas and for dilution of the coal-mine drainage in the northern parts and the sewage wastes in the southern parts. Swatara Creek drains 576 square miles just east of Harrisburg, Pa., and is the largest tributary to the Susquehanna River from the north side below Harrisburg. It rises in the southern Pocono Mountains and flows southwestward across the Lebanon Plateau. On an average day Swatara Creek discharges more than 630 million gallons into the Susquehanna River at Middletown, Pa. In a year this amounts to about 23 inches of water over the entire basin and is the residual from an average annual precipitation of 45.5 inches. During an average year the flow in Swatara Creek from the upper third of the basin above Harper Tavern is always greater than 1,300 mgd (million gallons per day) for at least 15 days and is always greater than 25 mgd for at least 350 days. The daily streamflow from the basin averages 1.1 mgd per sq mi, but yields from different areas range from 0.97 to 1.22 mgd per sq mi. These variations are caused chiefly by differences in precipitation and land cover. The area of lowest yield is in the valleys west of Tremont, and the highest yields are in the Upper and Lower Little Swatara Creek subbasins. At high and medium stages the chemical character of the water in the streams is suitable for public and private supplies. At lower stages, defending on the areas and the amounts of contamination by coal-mine drainage and sewage pollution, the natural flow may require some treatment. At low stages the chemical characteristics of the natural flow not affected by man is almost identical with that of the ground water in the area drained by the stream. In general, the total dissolved solids range from about 25 to 400 parts per million and the hardness is as much as about 300 parts per million. The ground-water increment to the base flow of Swatara Creek averages about 240 mgd, or about 8.8 inches annually, for the basin. Generally, ground-water supplies in amounts of less than 0.5 mgd can be developed south of Blue Mountain. Supplies of several million gallons per day have been developed for industrial use from the permeable limestones in the south-central part of the basin. More intensive investigation in other parts of the basin would indicate areas where supplies of more than 0.5 mgd could be developed from properly spaced wells. The chemical character of water from wells depends largely on the host rock. In highly soluble rocks water contains large amount of dissolved solids; in more resistant rocks concentrations are lower. The chemical character of unpolluted ground water generally reflects the composition of the more readily soluble minerals in the local geologic environment. Areas contaminated by septic- tank effluent may have above normal amounts of nitrate and detergent products. Except where polluted, most ground water is suitable for public and industrial uses without extensive treatment. Sites for storage of surface water exist in the part of the basin lying in the valley and ridge area. As much as 30 to 40 percent of the annual flow could be impounded for release as low-flow augmentation for dilution of mine drainage and other wastes in the basin. Low sediment yields of supplying drainage areas would ensure a long life expectancy of reservoirs at these sites. Overbank flooding of the main stem of the Swatara Creek and its tributaries has occurred many times in the past. However, it has not been a hazard because urban development has not encroached on the flood plain. An inundation map of the August 1933 flood provides a basis that urban planners may use to avoid future damage. As water in the Swatara Creek moves downstream to the Susquehanna River, the flow is influenced consecutively by a large annual rainfall on the northern valley and ridge area, the wastes of surface and subsurface coal-mining activities, and less annual rainfall on the part of the basin lying in the Lebanon Plateau area; the flow is supplemented and further influenced by many tributaries and by the industrial and domestic wastes that are carried by these secondary streams. The annual precipitation ranges from 52 inches at the east edge and 49 inches at the west edge of the mountainous part of the basin to about 41 inches at the southwestern part at Middletown. The rainfall generally is adequate during the growing season to mature the crops. The mean annual temperature at Lebanon is about 52°F, and the growing season is about 180 days. In this report the basin has been divided into eight hydrologic zones, leased on runoff, natural use of water, and chemical character of water. Four zones lie in the valley and ridge area, three lie in the Lebanon Plateau area, and one lies in the highland along the southeastern basin boundary. In each of the zones the hydrologic characteristics are virtually the same, but they may be completely different from those in adjacent zones. The boundaries of the zones generally coincide with boundaries between geologic formations, and the areas in each zone include rocks of similar influence on water. Streams in zone 4 at the northeast edge of the plateau have the highest average surface runoff from 1.2 to 1.1 mgd per sq mi whereas those in zone 2 at the northwest edge of the valley and ridge area have the lowest, about 1.0 mgd. Streams in zone 8, along the southeast edge of the basin, have the largest sustained low-flow yield, about 0.26 to 0.19 mgd per sq mi; those in zone 5 overlying the Martinsburg Shale east of Harrisburg have the smallest sustained low-flow yields, 0.03 to 0.01 mgd. Streams in the limestone area of zone 7 have the greatest range in low-flow yields in any one zone from 0.60 to 0 mgd per sq mi. Low-flow yields in zones 1 through 4 range from 0.13 to 0.03 mgd per sq mi. Surface flows from zones 1 and 2 are generally acidic and contain high concentrations of sulfate, iron, and total dissolved solids especially where contaminated with mine wastes. Surface flows from zones 3 and 4 are dilute, slightly alkaline, and suitable for public water supplies. Surface flows from zones 5, 6, and 7 are alkaline and contain moderate concentrations of dissolved solids with waters of highest hardness occurring in zone 7. Surface flows from zone 8 are dilute to moderately mineralized and are relatively high in silica concentration. Nitrate concentrations are high in surf Fee flows below sewage outfalls and in ground water contaminated by septic tank effluent and industrial wastes. Average annual sediment yields of 550 to 650 tons per square mile are characteristic of zones 1 and 2 where strip mining has destroyed the forest cover and coal culm is carried into the streams. From agricultural lands on the Martinsburg Shale in zones 5 and 6, annual sediment yields range from 300 to 350 tons per square mile; but from agricultural lands on the siliceous rocks in zone 8 and zones 3 and 4 in the valley and ridge area, the sediment yield ranges from 200 to 250 tons annually per square mile. Lowest annual sediment yields in the basin are in the forested areas of siliceous rocks in zones 2, 3, 4, and 5, and in the sinkhole topography of the limestones in zone 7 where the yield ranges from 30 to 35 tons and 50 to 60 tons per square mile, respectively. The amount of ground water that can be developed in the basin is dependent on the ability of the underlying rocks to yield water to wells. More than 300 gpm (gallons per minute) can be obtained from wells in alluvial materials in the valley bottoms and in some of the limestones where large solution channels and fractures are penetrated by the wells. From 50 to 300 gpm can be obtained from wells in loosely cemented sandstones and in fractured limestones. From 10 to 50 gpm can be developed from wells in the shales and harder sandstones. The most dense rocks will yield from 1 to 10 gpm from fractures and crevices. Most wells yield water from the upper 350 feet of the formation, for this part contains the most fractures or solution channels. Studies show that the velocity at which a contaminant will move downstream in the basin is related to the discharge of the stream at the time. At a stream discharge of about 400 mgd at Pine Grove, a contaminant in Swatara Creek would require about 40 hours to move from Pine Grove to Middletown. As a result of dispersion and dilution, the maximum concentration of the contaminant at Middletown would be less than 20 percent the concentration at Pine Grove under these conditions. An evaluation of the availability of water in the basin indicates that about I,239 mgd enters as precipitation, 630 mgd leaves as streamflow, 580 mgd is evaporated and transpired, and 56 mgd is diverted for use by man. Not all the diversions for man's use are lost to the basin, as about 27 mgd is returned as sewage for reuse. About one-fourth of the waste water is returned to the ground and the remainder to stream drainageways. Of that diverted by man, 11.6 mgd is used for public supply and 44.4 mgd for industrial and private supplies. Diversions of streamflow furnish 86 percent of the public supply and 27 percent of the industrial supply, and ground-water sources yield the remainder. Municipal and private sewage treatment plants are upgrading the waste water in many places, but no provisions are being made for treatment other than natural dilution and assimilation for the 15 mgd of coal-nine drainage in the northern part of the basin. Technology for economic treatment of mine water is not available at this time, although research in this field is being done. Urbanization eastward from Harrisburg and around Lebanon has increased the population density of the basin. Densities of 500 people per square mile and water use exceeding 2.0 mgd per sq mi can be expected in the future. By the year 2000 the population of the basin may increase 60 percent; and if the per capita rate of use increases 0.5 percent per year the domestic requirements for water will be about two times the present use, or 23 mgd. Similarly, if the present 1:4 ratio of domestic use to industrial use of water continues, at least 89 mgd will be needed for industry in the future. Although an increase to twice the present use of water can be foreseen, or 112 mgd, water for the dilution and assimilation of wastes from treatment systems are not included. Providing water for dilution of wastes from treatment plants has not been a problem, but in the future the amounts needed for this purpose will be greater as the population increases. As water becomes more valuable, treatment of sewage wastes to reduce the biochemical-oxygen-demand load by at least 80 to 90 percent will be necessary to conserve water for more productive uses. As much as 100 mgd may be needed for waste dilution in the basin by year 2000. The present trends in suburban and light industrial development will probably persist in the basin. Problems arising through changes in economic value of water, conflicts in use, and alternatives in development are typical of those confronting the manager of a water-resource system.

Pennsylvania↗

Combined multibeam and LIDAR bathymetry data from eastern Long Island Sound and westernmost Block Island Sound-A regional perspective

Detailed bathymetric maps of the sea floor in Long Island Sound are of great interest to the Connecticut and New York research and management communities because of this estuary's ecological, recreational, and commercial importance. The completed, geologically interpreted digital terrain models (DTMs), ranging in area from 12 to 293 square kilometers, provide important benthic environmental information, yet many applications require a geographically broader perspective. For example, individual surveys are of limited use for the planning and construction of cross-sound infrastructure, such as cables and pipelines, or for the testing of regional circulation models. To address this need, we integrated 12 multibeam and 2 LIDAR (Light Detection and Ranging) contiguous bathymetric DTMs, produced by the National Oceanic and Atmospheric Administration during charting operations, into one dataset that covers much of eastern Long Island Sound and extends into westernmost Block Island Sound. The new dataset is adjusted to mean lower low water, is gridded to 4-meter resolution, and is provided in UTM Zone 18 NAD83 and geographic WGS84 projections. This resolution is adequate for sea floor-feature and process interpretation but is small enough to be queried and manipulated with standard Geographic Information System programs and to allow for future growth. Natural features visible in the grid include exposed bedrock outcrops, boulder lag deposits of submerged moraines, sand-wave fields, and scour depressions that reflect the strength of the oscillating and asymmetric tidal currents. Bedform asymmetry allows interpretations of net sediment transport. Anthropogenic artifacts visible in the bathymetric data include a dredged channel, shipwrecks, dredge spoils, mooring anchors, prop-scour depressions, buried cables, and bridge footings. Together the merged data reveal a larger, more continuous perspective of bathymetric topography than previously available, providing a fundamental framework for research and resource management activities in this major east-coast estuary.

Open-File Report↗

Cold-water corals of the world: Gulf of Mexico

The Gulf of Mexico is a semi-enclosed sea that borders the USA and Mexico and covers approximately 1.5 million square kilometers. The northern Gulf is topographically complex and is a rich source of oil and gas deposits, which has led to a great deal of research on benthic ecosystems from the coastal zone to the deep sea. While not fully explored, the distribution of cold seeps and deep corals in the northern Gulf is reasonably well described. The eastern Gulf has a moratorium on energy industry development and consequently less exploration and research has been conducted in this region; however, recent explorations have revealed deep scleractinian reefs on the west Florida slope and extensive octocoral gardens on the deep escarpment. The Gulf is a productive sea with lucrative fisheries in addition to oil and gas. Exploitation of natural resources and potential climate change impacts threaten vulnerable ecosystems in the Gulf, including those in the deep sea. This chapter describes the oceanography and geology of the Gulf of Mexico, presents the current state of the knowledge of cold-water coral distribution, physiology and ecology, and provides an assessment of the threats to these vulnerable ecosystems.

Book chapter↗

Wave energy saturation on a natural beach of variable slope

Time series of flow were measured across the inner surf zone during a storm. These data were used to quantify the dependence of wave height (transformed from measured flow) and velocity on local slope and depth. Similar to previous studies, as incident waves broke and propagated into the surf zone, wave energy became saturated, and wave height was strongly dependent on depth. However, the ratio of rms wave height to local depth (γ rms ) was found not to be constant but to vary between 0.29 and 0.55; γ rms increased with local slope and was independent of deepwater wave steepness. Thus the surf zone similarity parameter (the ratio of slope to the square root of steepness) did not adequately parameterize γ rms .

Journal of Geophysical Research - Oceans↗

An approach for characterizing the distribution of shrubland ecosystem components as continuous fields as part of NLCD

Characterizing and quantifying distributions of shrubland ecosystem components is one of the major challenges for monitoring shrubland vegetation cover change across the United States. A new approach has been developed to quantify shrubland components as fractional products within National Land Cover Database (NLCD). This approach uses remote sensing data and regression tree models to estimate the fractional cover of shrubland ecosystem components. The approach consists of three major steps: field data collection, high resolution estimates of shrubland ecosystem components using WorldView-2 imagery, and coarse resolution estimates of these components across larger areas using Landsat imagery. This research seeks to explore this method to quantify shrubland ecosystem components as continuous fields in regions that contain wide-ranging shrubland ecosystems. Fractional cover of four shrubland ecosystem components, including bare ground, herbaceous, litter, and shrub, as well as shrub heights, were delineated in three ecological regions in Arizona, Florida, and Texas. Results show that estimates for most components have relatively small normalized root mean square errors and significant correlations with validation data in both Arizona and Texas. The distribution patterns of shrub height also show relatively high accuracies in these two areas. The fractional cover estimates of shrubland components, except for litter, are not well represented in the Florida site. The research results suggest that this method provides good potential to effectively characterize shrubland ecosystem conditions over perennial shrubland although it is less effective in transitional shrubland. The fractional cover of shrub components as continuous elements could offer valuable information to quantify biomass and help improve thematic land cover classification in arid and semiarid areas.

Arizona, Florida, Texas↗

Use of waveform lidar and hyperspectral sensors to assess selected spatial and structural patterns associated with recent and repeat disturbance and the abundance of sugar maple (Acer saccharum Marsh.) in a temperate mixed hardwood and conifer forest

Waveform lidar imagery was acquired on September 26, 1999 over the Bartlett Experimental Forest (BEF) in New Hampshire (USA) using NASA's Laser Vegetation Imaging Sensor (LVIS). This flight occurred 20 months after an ice storm damaged millions of hectares of forestland in northeastern North America. Lidar measurements of the amplitude and intensity of ground energy returns appeared to readily detect areas of moderate to severe ice storm damage associated with the worst damage. Southern through eastern aspects on side slopes were particularly susceptible to higher levels of damage, in large part overlapping tracts of forest that had suffered the highest levels of wind damage from the 1938 hurricane and containing the highest levels of sugar maple basal area and biomass. The levels of sugar maple abundance were determined through analysis of the 1997 Airborne Visible/Infrared Imaging Spectrometer (AVIRIS) high resolution spectral imagery and inventory of USFS Northern Research Station field plots. We found a relationship between field measurements of stem volume losses and the LVIS metric of mean canopy height (r 2 = 0.66; root mean square errors = 5.7 m 3 /ha, p < 0.0001) in areas that had been subjected to moderate-to-severe ice storm damage, accurately documenting the short-term outcome of a single disturbance event.

Journal of Applied Remote Sensing↗

Role of bird movements in the epidemiology of West Nile and avian influenza virus

Avian influenza virus (AIV) is influenced by site fidelity and movements of bird hosts. We examined the movement ecology of American crows ( Corvus brachyrhynchos ) as potential hosts for West Nile virus (WNV) and greater white-fronted geese ( Anser albifrons frontalis ) as potential hosts for AIVs. Research was based on radio-telemetry studies conducted in the Central Valley of California, USA. While crows were restricted to a small area of only a few square kilometers, the distribution of the geese encompassed the northern Central Valley. The crows used 1.5 to 3.5 different roosting areas monthly from February through October, revealing lower roost fidelity than the geese that used 1.1 to 1.5 roosting areas each month from November through March. The crows moved a mean distance of 0.11 to 0.49 km/month between their roosting sites and 2.5 to 3.9 km/month between roosting and feeding sites. In contrast, the geese moved 4.2 to 19.3 km/month between roosting areas, and their feeding range varied from 13.2 to 19.0 km/month. Our comparison of the ecological characteristics of bird movements suggests that the limited local movements of crows coupled with frequent turnover of roosts may result in persistence of focal areas for WNV infection. In contrast, widespread areas used by geese will provide regular opportunities for intermixing of AIVs over a much greater geographic area.

California↗