SEARCH · Search USGS

Results for “Surveys in Geophysics”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19Linked to original sources

USGS2005

Environmental impacts of oil production on soil, bedrock, and vegetation at the U.S. Geological Survey Osage-Skiatook Petroleum Environmental Research site A, Osage County, Oklahoma

The U.S. Geological Survey is investigating the impacts of oil and gas production on soils, groundwater, surface water, and ecosystems in the United States. Two sites in northeastern Oklahoma (sites A and B) are presently being investigated under the Osage–Skiatook Petroleum Environmental Research project. Oil wells on the lease surrounding site A in Osage County, Oklahoma, produced about 100,000 bbl of oil between 1913 and 1981. Prominent production features on the 1.5-ha (3.7-ac) site A include a tank battery, an oil-filled trench, pipelines, storage pits for both produced water and oil, and an old power unit. Site activities and historic releases have left open areas in the local oak forest adjacent to these features and a deeply eroded salt scar downslope from the pits that extends to nearby Skiatook Lake. The site is underlain by surficial sediments comprised of very fine-grained eolian sand and colluvium as much as 1.4 m (4.6 ft) thick, which, in turn, overlie flat-lying, fractured bedrock comprised of sandstone, clayey sandstone, mudstone, and shale. A geophysical survey of ground conductance and concentration measurements of aqueous extracts (1:1 by weight) of core samples taken in the salt scar and adjacent areas indicate that unusual concentrations of NaCl-rich salt are present at depths to at least 8 m (26 ft) in the bedrock; however, little salt occurs in the eolian sand. Historic aerial photographs, anecdotal reports from oil-lease operators, and tree-ring records indicate that the surrounding oak forest was largely established after 1935 and thus postdates the majority of surface damage at the site. Blackjack oaks adjacent to the salt scar have anomalously elevated chloride ( 400 ppm) in their leaves and record the presence of NaCl-rich salt or salty water in the shallow subsurface. The geophysical measurements also indicate moderately elevated conductance beneath the oak forest adjoining the salt scar.

Oklahoma↗

USGS2022

Assessment of significant sand resources in Federal and California State Waters of the San Francisco, Oceanside, and Silver Strand littoral cell study areas along the continental shelf of California

Executive Summary The Sand Resources Project was established through collaborative agreements between the U.S. Geological Survey (USGS), the Bureau of Ocean Energy Management (BOEM), and the California Ocean Protection Council (OPC) with the purpose of evaluating sand and gravel resources in Federal and California State Waters for potential use in future beach-nourishment projects. Project partners worked in collaboration with California Coastal Sediment Management Workgroup (CSMW) members to define priority study areas for this work based on the potential for finding sand within the broader region and the needs for this sand as shown by beach erosion areas of concern in the adjacent littoral cells. The final study areas were defined to be (1) the San Francisco Littoral Cell, (2) the Oceanside Littoral Cell, and (3) the Silver Strand Littoral Cell. A two-stage approach was used to assess the study areas. The initial stage was a synthesis of the existing geophysical and sediment-sampling data in each area. This allowed for evaluations of the data availability, data gaps, and general patterns of sediment thickness and grain size. This synthesis was published in a separate USGS open-file report (Warrick and others, 2022). The findings from this assessment were used to refine study area boundaries and develop sampling plans for stage two of the project. Stage two of the project is the collection, processing, and synthesis of new data, including high-resolution geophysical surveys and sediment cores—this report addresses the second stage. The work focuses on two of the study areas—the San Francisco and the Oceanside Littoral Cells, where several research cruises have been conducted. A more limited, exploratory approach was used for the Silver Strand Littoral Cell, owing to the lack of existing high-resolution bathymetric data for this study area. The data collected provide new information about the three study areas, including sediment thickness, grain-size distributions, and total organic carbon. Sediment in all three study areas of the Sand Resources Study was suitable for beach nourishment, as reflected by their grain-size distributions and sediment thicknesses. For example, sandy sediment in the San Francisco Littoral Cell study area was on and immediately outside of the ebb-tidal bar of the San Francisco Bay, a landform that has a strong influence on grain-size patterns of the region. The presence of thick sediment deposits in this area was interpreted to be a function of tectonics, which has caused physical features that include a graben north of the Golden Gate whose deposits were thicker and siltier than the remaining area. Sandy sediment on the inner and outer parts of the continental shelf in the Oceanside Littoral Cell may be useful for nourishment, whereas the midshelf between these areas was dominated by silty sediment. Sediment in the Silver Strand Littoral Cell, which was only sampled selectively, had the greatest potential for beach nourishment because of the greater prevalence of beach-comparable grain sizes, especially in the more distal and deeper areas where medium sands were found. The Sand Resources Project did identify several sandy regions of the continental shelf that are deeper than dredging technologies currently (2022) available in the United States, which are generally limited to 30 meters (m) water depth or less. Although sandy sediment exists in all three study areas at water depths of 30 m or less, additional sediment supplies—most of which are in Federal Waters—are present in deeper settings, especially for the Oceanside and Silver Strand Littoral Cell study areas. Although the Silver Strand Littoral Cell study area was found to be considerably replete in sand resources, these conclusions are based on a limited sampling exercise across that study area. Thus, it may be beneficial to complete a more thorough characterization of the sediment resources in the Silver Strand Littoral Cell study area if it is determined that a need for sandy coastal sediment exists in this region. As a result of the Sand Resources Project, several areas of sand resources in Federal and California State Waters were found where they were previously unknown. As such, this project may provide important data for future coastal-management decisions in California, and it should provide a model for future investigations of sediment resources in other regions of the State.

California↗

USGS2022

Mapped predictions of manganese and arsenic in an alluvial aquifer using boosted regression trees

Manganese (Mn) concentrations and the probability of arsenic (As) exceeding the drinking-water standard of 10 μg/L were predicted in the Mississippi River Valley alluvial aquifer (MRVA) using boosted regression trees (BRT). BRT, a type of ensemble-tree machine-learning model, were created using predictor variables that affect Mn and As distribution in groundwater. These variables included iron (Fe) concentrations and specific conductance predicted from previously developed BRT models, groundwater flux and age estimates from MODFLOW, and hydrologic characteristics. The models also included results from the first airborne geophysical survey conducted in the United States to target an entire aquifer system. Predictions of high Mn and As occurred where Fe was high. Predicted high Mn concentrations were correlated with fraction of young groundwater (less than 65 years) computed from MODFLOW results. High probabilities of As exceedance were predicted where groundwater was relatively old and airborne electromagnetic resistivity was high, typically proximal to streams. Two-variable partial-dependence plots and sensitivity analysis were used to provide insight into the factors controlling Mn and As distribution in groundwater. The maps of predicted Mn concentrations and As exceedance probabilities can be used to identify areas where these constituents may be high, and that could be targeted for further study. This paper shows that incorporation of a selected set of process-informed data, such as MODFLOW results and airborne geophysics, into a machine-learning model improves model interpretability. Incorporation of process-rich information into machine-learning models will likely be useful for addressing a wide range of problems of interest to groundwater hydrologists.

Arkansas, Louisiana, Mississippi, Tennessee↗

USGS2013

Linkages between lake shrinkage/expansion and sublacustrine permafrost distribution determined from remote sensing of interior Alaska, USA

[1] Linkages between permafrost distribution and lake surface-area changes in cold regions have not been previously examined over a large scale because of the paucity of subsurface permafrost information. Here, a first large-scale examination of these linkages is made over a 5150 km 2 area of Yukon Flats, Alaska, USA, by evaluating the relationship between lake surface-area changes during 1979–2009, derived from Landsat satellite data, and sublacustrine groundwater flow-path connectivity inferred from a pioneering, airborne geophysical survey of permafrost. The results suggest that the shallow (few tens of meters) thaw state of permafrost has more influence than deeper permafrost conditions on the evolving water budgets of lakes on a multidecadal time scale. In the region studied, these key shallow aquifers have high hydraulic conductivity and great spatial variability in thaw state, making groundwater flow and associated lake level evolution particularly sensitive to climate change owing to the close proximity of these aquifers to the atmosphere.

Alaska↗

USGS2022

Compilation of existing data for sand resource studies in Federal and California State Waters of the San Francisco, Oceanside, and Silver Strand littoral cell study areas along the continental shelf of California—Strategy for field studies and sand resource assessment

California↗

USGS2015

Archive of sediment data from vibracores collected in 2010 offshore of the Mississippi barrier islands

In 2010, scientists from the U.S. Geological Survey St. Petersburg Coastal and Marine Science Center collected sediment cores from coastal waters offshore of the Mississippi barrier islands. With funding support from the Northern Gulf of Mexico (NGOM) Ecosystem Change and Hazard Susceptibility project, 65 subaqueous sediment cores were collected over an area of 480 square kilometers (km 2 ), from Ship Island to Petit Bois Island Pass, Mississippi, within the boundary of Gulf Islands National Seashore. This represents only a fraction of the total area encompassed by the NGOM project, which extends from Sabine Lake, Louisiana, to Perdido Bay, Alabama. The primary objectives of the NGOM project are to understand the evolution of coastal ecosystems on the northern gulf coast, the impact of human activities on these ecosystems, and the vulnerability of ecosystems and human communities to more frequent and intense hurricanes in the future. Selection of the core site locations was based on geophysical surveys conducted around the islands from 2008 to 2010. The surveys, using acoustic systems to image and interpret the nearsurface stratigraphy, were conducted to investigate the geologic controls on island evolution. This data series serves as an archive of sediment data collected from August to September 2010, offshore of the Mississippi barrier islands. Data products, including descriptive core logs, core photographs, results of sediment grain-size analyses, sample location maps, and geographic information system (GIS) data files with accompanying formal Federal Geographic Data Committee (FDGC) metadata can be downloaded from the data products and downloads page.

Mississippi↗

USGS2014

Geologic map of the Kechumstuk fault zone in the Mount Veta area, Fortymile mining district, east-central Alaska

This map was developed by the U.S. Geological Survey Mineral Resources Program to depict the fundamental geologic features for the western part of the Fortymile mining district of east-central Alaska, and to delineate the location of known bedrock mineral prospects and their relationship to rock types and structural features. This geospatial map database presents a 1:63,360-scale geologic map for the Kechumstuk fault zone and surrounding area, which lies 55 km northwest of Chicken, Alaska. The Kechumstuk fault zone is a northeast-trending zone of faults that transects the crystalline basement rocks of the Yukon-Tanana Upland of the western part of the Fortymile mining district. The crystalline basement rocks include Paleozoic metasedimentary and metaigneous rocks as well as granitoid intrusions of Triassic, Jurassic, and Cretaceous age. The geologic units represented by polygons in this dataset are based on new geologic mapping and geochronological data coupled with an interpretation of regional and new geophysical data collected by the Alaska Department of Natural Resources, Division of Geological and Geophysical Surveys. The geochronological data are reported in the accompanying geologic map text and represent new U-Pb dates on zircons collected from the igneous and metaigneous units within the map area.

Alaska↗

USGS2006

Distribution, thickness, and volume of fine-grained sediment from precipitation of metals from acid-mine waters in Keswick Reservoir, Shasta County, California

In February 1993, the U.S. Geological Survey (USGS) acquired high-resolution seismic-reflection data to map the distribution and thickness of fine-grained sediments associated with acid-mine drainage in Keswick Reservoir on the Sacramento River, near Redding, California. In the Spring Creek Arm of Keswick Reservoir, the sediments occurred in three distinct accumulations; thicknesses are greater than 2 meters (m) in the western accumulation, greater than 5 m in the central accumulation, and up to 8 m in the eastern accumulation. In Keswick Reservoir, fine-grained sediments related to acid-mine drainage were present from slightly north of the Spring Creek Arm downstream to the Keswick Dam. Sediment thickness varies from about 3 m opposite the mouth of the Spring Creek Arm to less than 1 m near Keswick Dam. Our estimate for the total volume of fine-grained sediments in the Spring Creek Arm at the time of the geophysical survey in February 1993 is about 152,000 cubic meters in three sediment accumulations, with about 14,000, 32,000, and 105,000 cubic meters respectively in the western, central, and eastern accumulations. We interpreted that an additional 110, 000 cubic meters of material was present in the main part of Keswick Reservoir. At the time of data collection, we therefore estimate that the total volume of fine-grained sediment was 260,000 cubic meters. In the main part of Keswick Reservoir, 42% to 50% of the reservoir area contiguous to Spring Creek Arm had mappable fine-grained sediments. Decreasing sediment supply down-reservoir meant that mappable sediment covered only about 35% of the reservoir in the area to the south, decreasing to about 12% near Keswick Dam. Much of the reservoir bottom below the Spring Creek Arm could have had a thin (less than 20-30 cm) cover of fine-grained sediment that was not mappable using the seismic-reflection data.

California↗

USGS1969

Report on exploration of the Wadi Yiba copper prospect, Tihamat Ash Sham quadrangle, Kingdom of Saudi Arabia

The first phase of an exploration program at The Wadi Yiba copper prospect consisted of geologic mapping, prospecting, sampling, geophysical surveys, and diamond drilling. Copper mineralization is in a sedimentary rock sequence comprised mostly of siliceous, calcareous, and dolomitic rocks metamorphosed to the greenschist facies. The metasedimentary rocks are overlain and underlain by metavolcanic rocks. They are folded into a tight north-plunging syncline transected by two fault systems. Results from the exploration program indicate that a fault zone which sub-parallels the synclinal axis and cuts siliceous dolomite contains copper mineralization and small amounts of gold and silver. Copper and silver beaming pyroclastic rocks were found in the upper part of the metasedimentary rock sequence. Concentrations of copper mineralization seem to be restricted to particular rock units in the metasedimentary rock sequence. Primary sulfides have not been encountered in the drill holes to date and the results from one drill hole indicate secondary copper sulfide minerals to a vertical depth of 60 meters. Further exploration seems to be warranted and a program is proposed which includes the investigation of other mineral occurrences and geophysical anomalies in the region.

Open-File Report↗

USGS2015

Hydrogeologic framework, hydrology, and refined conceptual model of groundwater flow for Coastal Plain aquifers at the Standard Chlorine of Delaware, Inc. Superfund Site, New Castle County, Delaware, 2005-12

From 1966 to 2002, activities at the Standard Chlorine of Delaware chemical facility in New Castle County, Delaware resulted in the contamination of groundwater, soils, and wetland sediment. In 2005, the U.S. Geological Survey (USGS), in partnership with the U.S. Environmental Protection Agency, Region 3, and the Delaware Department of Natural Resources and Environmental Control began a multi-year investigation of the hydrogeologic framework and hydrology of the confined aquifer system. The goals of the ongoing study at the site (the Potomac Aquifer Study) are to determine the hydraulic connection between the Columbia and Potomac aquifers, determine the direction of groundwater flow in the Potomac aquifer, and identify factors affecting the fate of contaminated groundwater. This report describes progress made towards these goals based on available data collected through September 2012. The regional hydrogeologic framework indicates that the site is underlain by Coastal Plain sediments of the Columbia, Merchantville, and Potomac Formations. Two primary aquifers underlying the site, the Columbia and the upper Potomac, are separated by the Merchantville Formation confining unit. Local groundwater flow in the surficial (Columbia) aquifer is controlled by topography and generally flows northward and discharges to nearby surface water. Regional flow within the Potomac aquifer is towards the southeast, and is strongly influenced by major water withdrawals locally. Previous investigations at the site indicated that contaminants, primarily benzene and chlorinated benzene compounds, were present in the Columbia aquifer in most locations; however, there were only limited detections in the upper Potomac aquifer as of 2004. From 2005 through 2012, the USGS designed a monitoring network, assisted with exploratory drilling, collected data at monitoring wells, conducted geophysical surveys, evaluated water-level responses in wells during pumping of a production well, and evaluated major aquifer withdrawals. Data collected through these efforts were used to refine the local conceptual flow system. The refined conceptual flow system for the site includes: (a) identification of gaps in confining units in the study area, (b) identification and correlation of multiple water-bearing sand intervals within the upper Potomac Formation, (c) connections between groundwater and surface water, (d) connections between shallow and deeper groundwater, (e) new water-level (or potentiometric surface) maps and inferred flow directions, and (f) identification of major local pumping well influences. The implications of the revised conceptual flow system on the occurrence and movement of site contaminants are that the resulting detection of contaminants in the upper Potomac aquifer at specific well locations can be attributed primarily to either advective lateral transport, direct vertical contaminant transport, or a combination of vertical and lateral movement resulting from changes in water withdrawal rates over time.

Delaware↗

USGS2001

Hydrogeologic data for the Big River–Mishnock River stream-aquifer system, central Rhode Island

Hydrogeology, ground-water development alternatives, and water quality in the BigMishnock stream-aquifer system in central Rhode Island are being investigated as part of a long-term cooperative program between the Rhode Island Water Resources Board and the U.S. Geological Survey to evaluate the ground-water resources throughout Rhode Island. The study area includes the Big River drainage basin and that portion of the Mishnock River drainage basin upstream from the Mishnock River at State Route 3. This report presents geologic data and hydrologic and water-quality data for ground and surface water. Ground-water data were collected from July 1996 through September 1998 from a network of observation wells consisting of existing wells and wells installed for this study, which provided a broad distribution of data-collection sites throughout the study area. Streambed piezometers were used to obtain differences in head data between surface-water levels and ground-water levels to help evaluate stream-aquifer interactions throughout the study area. The types of data presented include monthly ground-water levels, average daily ground-water withdrawals, drawdown data from aquifer tests, and water-quality data. Historical water-level data from other wells within the study area also are presented in this report. Surface-water data were obtained from a network consisting of surface-water impoundments, such as ponds and reservoirs, existing and newly established partial-record stream-discharge sites, and synoptic surface-water-quality sites. Water levels were collected monthly from the surface-water impoundments. Stream-discharge measurements were made at partial-record sites to provide measurements of inflow, outflow, and internal flow throughout the study area. Specific conductance was measured monthly at partial-record sites during the study, and also during the fall and spring of 1997 and 1998 at 41 synoptic sites throughout the study area. General geologic data, such as estimates of depth to bedrock and depth to water table, as well as indications of underlying geologic structure, were obtained from geophysical surveys. Site-specific geologic data were collected during the drilling of observation wells and test holes. These data include depth to bedrock or refusal, depth to water table, and lithologic information.

Rhode Island↗

USGS2013

Settlement of the USS Arizona, Pearl Harbor, Hawaii

The U.S. Geological Survey, in collaboration with the National Park Service Submerged Resources Center, undertook investigations at the USS Arizona Memorial at Pearl Harbor, Hawaii, in 2002, 2003, and 2005 to characterize geological factors affecting the deterioration and movement of the hull of the USS Arizona. Since sinking on the morning of December 7, 1941, the hull of the USS Arizona has been slowly but steadily disappearing below the surface of Pearl Harbor. Continuous sediment coring at three of four locations around the hull of the Arizona was only partially successful, but it was sufficient to identify a varied sedimentary substrate beneath the hull. A boring near the stern reveals a thick, continuous sequence of soft, gray clay to the bottom of the boring. In contrast, borings near the bow and starboard side, below about 5 meters subbottom depth, indicate the presence of very stiff, brown clay and coral debris and an absence of soft clay. Multisensor core logger scanning of the recovered cores distinguishes the lower density of the soft, gray clay at the stern from the higher density of the stiff, brown clays and coral debris at the bow and starboard side. Uniaxial consolidation testing of the soft gray clay indicates a normally consolidated sequence, whereas the stiff, brown clay and coral debris are overconsolidated. Profiles of shear wave velocity vs. depth obtained through spectral analysis of interface wave testing around the perimeter of the hull in 2005 identified areas of higher velocity, stiffer sediment at the bow and starboard side, which correspond to the dense, stiff clay recovered near the bow and starboard borings. Low shear-wave velocities at the port midship and quarter of the hull correlate with the lower density, softer sediment recovered from the boring at the stern. Cross sections of the subbottom of the Memorial combine results from the sediment borings and geophysical surveys and depict a wedge of soft clay unconformably overlying the stiff clays and coral debris beneath the aft half of the USS Arizona and thickening toward the stern. The 2008 position of the hull has been documented using both tide-based and differential Global Positioning System (GPS) measuring systems. Analysis of historical and recent photographs was done to create a record of settlement from the time of sinking in 1941 to the present. By examining shadows in suitable photos, the sun azimuth, local time of day, and tide levels were determined to derive tide-adjusted and sea-level-rise-corrected elevations for structures on the hull and from these elevations to obtain settlement and tilt trends. The settlement trends, most complete for barbette 3, have two components. An early, nonlinear component ends on December 9, 1941, and represents the initial penetration and displacement of the bottom sediment by the hull. A linear, long-term trend of normal consolidation continues to the present day. Long-term settlement rates are greatest at the stern and decrease linearly to the midship, showing that the aft half of the hull is moving as an intact, rigid body. The recent rate of settlement at the stern is about 3.5 mm/year; rates at the starboard midship and forward part of the hull are less than one-third of the stern rate. The aft half of the USS Arizona hull presently tilts about 2 degrees to port, an increase of at least 1.5 degrees since the initial sinking of the ship. The results of this study identify differential settlement of the Arizona hull, due to the wedge of soft clay underlying the aft half of the hull, as the cause of the movement of the hull beneath the surface of Pearl Harbor. Calculation of sediment consolidation using lab-determined properties of the soft clay demonstrates that the observed settlements can be reproduced by projecting appropriate clay thicknesses beneath the hull. Several of the high-quality photographs analyzed for the historical settlement analysis highlight some of the limitations of this retrospective technique for determining tide-based elevations. In these cases, calculated structure elevations do not conform to the settlement trend, indicating that there can be complicating factors affecting the interpretation of the photos. Conflicting dates for events during the salvage operations were also encountered.

Hawai'i↗

USGS2020

Northward migration of the Oregon forearc on the Gales Creek fault

The Gales Creek fault (GCF) is a 60-km-long, northwest-striking dextral fault system (west of Portland, Oregon) that accommodates northward motion and uplift of the Oregon Coast Range. New geologic mapping and geophysical models confirm inferred offsets from earlier geophysical surveys and document ∼12 km of right-lateral offset of a basement high in Eocene Siletz River Volcanics since ca. 35 Ma and ∼8.8 km of right-lateral separation of Miocene Columbia River Basalt at Newberg, Oregon, since 15 Ma (∼0.62 ± 0.12 mm/yr, average long-term rate). Relative uplift of Eocene Coast Range basalt basement west of the fault zone is at least 5 km based on depth to basement under the Tualatin Basin from a recent inversion of gravity data. West of the city of Forest Grove, the fault consists of two subparallel strands ∼7 km apart. The westernmost, Parsons Creek strand, forms a linear valley southward to Henry Hagg Lake, where it continues southward to Newberg as a series of en echelon strands forming both extensional and compressive step-overs. Compressive step-overs in the GCF occur at intersections with ESE-striking sinistral faults crossing the Coast Range, suggesting the GCF is the eastern boundary of an R′ Riedel shear domain that could accommodate up to half of the ∼45° of post–40 Ma clockwise rotation of the Coast Range documented by paleomagnetic studies. Gravity and magnetic anomalies suggest the western strands of the GCF extend southward beneath Newberg into the Northern Willamette Valley, where colinear magnetic anomalies have been correlated with the Mount Angel fault, the proposed source of the 1993 M 5.7 Scotts Mills earthquake. The potential-field data and water-well data also indicate the eastern, Gales Creek strand of the fault may link to the NNW-striking Canby fault through the E-W Beaverton fault to form a 30-km-wide compressive step-over along the south side of the Tualatin Basin. LiDAR data reveal right-lateral stream offsets of as much as 1.5 km, shutter ridges, and other youthful geomorphic features for 60 km along the geophysical and geologic trace of the GCF north of Newberg, Oregon. Paleoseismic trenches document Eocene bedrock thrust over 250 ka surficial deposits along a reverse splay of the fault system near Yamhill, Oregon, and Holocene motion has been recently documented on the GCF along Scoggins Creek and Parsons Creek. The GCF could produce earthquakes in excess of Mw 7, if the entire 60 km segment ruptured in one earthquake. The apparent subsurface links of the GCF to other faults in the Northern Willamette Valley suggest that other faults in the system may also be active.

Oregon↗

USGS2024

A comprehensive assessment of submarine landslides and mass wasting processes offshore southern California

It is critical to characterize submarine landslide hazards near dense coastal populations, especially in areas with active faults, which can trigger slope failure, subsequent tsunamis, and damage seabed infrastructure during earthquake shaking. Offshore southern California, numerous marine geophysical surveys have been conducted over the past decade, and high-resolution bathymetric and subsurface data now cover about 60 percent of the total region between Point Conception and the United States-Mexico border from the California coast out to the base of Patton Escarpment ∼200 km offshore. In a comprehensive compilation and interpretive mapping effort, we find evidence of seafloor failure throughout offshore southern California with nearly 1,500 submarine landslide-related features, including 63 discrete slide deposits with debris and >1,400 slide-related scarps. In our analysis, we highlight new mapping of submarine landslides in Catalina Basin, the Del Mar slide, the San Gabriel slide complex, and the 232 km 2 San Nicolas slide, the largest area of any known submarine landslide mass offshore southern California. Analysis of the spatial distribution of submarine landslide features suggests that most mapped slide features are located relatively near coastal sediment sources, particularly during sea-level lowstand conditions, which underscores the importance of sediment supply and sediment accumulation on low-gradient slopes as failure preconditioning processes. Tectonically driven uplift at shelf edges and along basin flanks is another key preconditioning factor, and our results also suggest that earthquakes along active faults trigger mass wasting, especially for repeated, small-scale failures on tectonically steepened slopes.

California↗

USGS2025

Phase 1 technical implementation plan for the expansion of the ShakeAlert earthquake early warning system to Alaska

Executive Summary The conference report accompanying the fiscal year (FY) 2022 Consolidated Appropriations Act (Public Law 117–103) for the U.S. Department of the Interior and related agencies directed the U.S. Geological Survey (USGS) to “work with the State of Alaska to develop an implementation plan to be completed within two years in order to put ShakeAlert/Earthquake Early Warning in Alaska” (p. 29). Congress included $1 million in the FY 2022 appropriation to conduct this effort. The USGS Earthquake Hazards Program, along with partner organizations, has developed the ShakeAlert earthquake early warning (EEW) system for the West Coast, which currently operates in California, Oregon, and Washington. The purpose of the system and its alert delivery partners is to reduce the impact of earthquakes and save lives and property by delivering ShakeAlert-powered alerts that are transmitted to the public via mass notification technologies, and by providing more detailed data streams to institutional users and commercial service providers to trigger automated, user-specific, protective actions. ShakeAlert was designed in such a way that it could be expanded to other U.S. regions with high earthquake risk, after the build-out of seismic and geodetic networks to support ShakeAlert in a specified region is completed and the necessary funding is secured for long-term operation and maintenance. When an earthquake occurs, seismic waves radiate from the rupturing fault like waves on a pond. It is these waves that people feel as earthquake shaking and that can cause damage to structures. Using networks of ground-motion sensors and sophisticated computer algorithms, ShakeAlert can detect an earthquake seconds after it begins, calculate its location and magnitude, and estimate the resulting intensity of shaking. Early warnings of impending shaking are then sent to people and systems that may experience damaging shaking, allowing them to take appropriate protective actions. Depending on the user’s distance from the earthquake, alerts may be delivered before, during, or after the arrival of strong shaking. There will almost always be a region near the earthquake epicenter where alerts arrive after damaging shaking has begun. The ShakeAlert system updates its ground-motion estimates as an earthquake grows larger. In response to the FY 2022 congressional direction, the USGS worked with the State of Alaska to devise this implementation plan for ShakeAlert expansion to Alaska. The USGS engaged with the Alaska Division of Homeland Security and Emergency Management (DHS&EM) and the Alaska Division of Geological and Geophysical Surveys (DGGS). A cooperative agreement was awarded to the Alaska Earthquake Center (AEC) at the University of Alaska Fairbanks (UAF) for their contributions to the plan and their work coordinating with other networks in Alaska. The USGS engaged with the Alaska Seismic Hazards Safety Commission (ASHSC) throughout the process. The USGS also held a series of Alaska stakeholder engagements. The process of developing the implementation plan was facilitated by contracted staff from Corner Alliance, which is a government consulting firm. This implementation plan describes the details and estimates the costs for a Phase 1 expansion of the ShakeAlert system to Alaska. A geographically limited Phase 1 goal was chosen that covers the highest risk and most populated areas of Alaska. The areas proposed encompass the State’s main population centers and 90 percent of the State’s population. This Phase 1 design is considered very challenging and ambitious from the viewpoint of network operators. The lessons learned if this plan is implemented could be used to consider subsequent phases to expand EEW beyond Phase 1 in Alaska in the future. ShakeAlert is built on the foundation of the sensor networks and data processing infrastructure of the USGS-led Advanced National Seismic System (ANSS). This implementation plan calls for a total of 450 high-quality, real-time EEW-capable ANSS seismic stations in Alaska: 270 new stations, 160 upgraded stations, and 20 existing stations. These seismic station numbers are based on a station spacing of 10 kilometers (km) in urban areas, 20 km in seismic source areas that endanger population centers, and 40 km in other areas. The associated costs also include support for some EEW-capable global navigation satellite system (GNSS) stations, with a focus on improving warnings for large subduction zone earthquakes. For effective EEW, ShakeAlert requires low-latency, high-availability, robust telemetry links to deliver continuous, real-time data from field stations to the data centers. The Alaska data processing hardware infrastructure would follow the general design for fail-safe operation that is used for the ShakeAlert system on the West Coast. The ShakeAlert architecture uses two independent layers: the production layer for earthquake processing and the alert layer to make alerting decisions and serve alerts to users. This implementation plan includes two geographically separated data centers in Alaska, each with two fully independent production and alert layers using the same system design developed for the West Coast. As of March 2024, the ShakeAlert system is at version 3.0.1, with more advanced versions in the development and testing pipeline. ShakeAlert originally used two algorithms to determine the location and magnitude of earthquakes using seismic data. A third algorithm that can calculate very large magnitudes of very large earthquakes with geodetic data was added in March 2024. ShakeAlert publishes several data and alert products to meet the needs of different users. All messages include the location of the earthquake, either as a point or a line, and its magnitude. Ground-shaking estimates are published in two forms, as ground-motion contours and a map grid. Providing adequate warning time for strong shaking (the “target threshold”) requires sending alerts at a threshold lower than that strong shaking level (the “alert threshold”). The thresholds for public alerting in Alaska would be a joint USGS and State decision. To have the greatest benefit, ShakeAlert-powered alerts would be delivered to institutional users and individuals by all practical pathways. The USGS alert layer can support thousands of institutional users and alert redistributors, but the USGS does not have the mission nor the infrastructure and expertise to perform mass notifications to the public or implement automatic actions for end users of the alerts. To meet this need, ShakeAlert recruits private sector “technology enablers” that have the necessary expertise to develop end-user implementations using EEW alerts with the goal of stimulating an EEW industry. Earthquake early warning alerts are useless if people do not know how to respond to them. Although the alert messages include instructions about what to do (drop, cover, and hold on), alerts are more effective if people have been trained in advance. Messages about ShakeAlert’s capabilities, limitations, and benefits could be integrated with existing earthquake education programs, including State-run programs. Therefore, ShakeAlert would coordinate with both public and private partners and stakeholders through various partnerships and agreements to accomplish consistent and ongoing public earthquake hazard education. The estimated capital cost of completing the computing infrastructure and sensor networks for the Phase 1 ShakeAlert expansion to Alaska is approximately $66 million in 2024 dollars. The annual operation and maintenance cost of the completed system is estimated to be $12 million per year in 2024 dollars when fully built out.

Alaska↗

USGS2009

Brine migration from a flooded salt mine in the Genesee Valley, Livingston County, New York: Geochemical modeling and simulation of variable-density flow

The Retsof salt mine in upstate New York was flooded from 1994 to 1996 after two roof collapses created rubble chimneys in overlying bedrock that intersected a confined aquifer in glacial sediments. The mine now contains about 60 billion liters of saturated halite brine that is slowly being displaced as the weight of overlying sediments causes the mine cavity to close, a process that could last several hundred years. Saline water was detected in the confined aquifer in 2002, and a brine-mitigation project that includes pumping followed by onsite desalination was implemented in 2006 to prevent further migration of saline water from the collapse area. A study was conducted by the U.S. Geological Survey using geochemical and variable-density flow modeling to determine sources of salinity in the confined aquifer and to assess (1) processes that control movement and mixing of waters in the collapse area, (2) the effect of pumping on salinity, and (3) the potential for anhydrite dissolution and subsequent land subsidence resulting from mixing of waters induced by pumping. The primary source of salinity in the collapse area is halite brine that was displaced from the flooded mine and transported upward by advection and dispersion through the rubble chimneys and surrounding deformation zone. Geochemical and variable-density modeling indicate that salinity in the upper part of the collapse area is partly derived from inflow of saline water from bedrock fracture zones during water-level recovery (January 1996 through August 2006). The lateral diversion of brine into bedrock fracture zones promoted the upward migration of mine water through mixing with lower density waters. The relative contributions of mine water, bedrock water, and aquifer water to the observed salinity profile within the collapse area are controlled by the rates of flow to and from bedrock fracture zones. Variable-density simulations of water-level recovery indicate that saline water has probably not migrated beyond the collapse area, while simulations of pumping indicate that further upward migration of brine and saline water is now prevented by groundwater withdrawals under the brine-mitigation project. Geochemical modeling indicates that additional land subsidence as a result of anhydrite dissolution in the collapse area is not a concern, as long as the rate of brine pumping is less than the rate of upward flow of brine from the flooded mine. The collapse area above the flooded salt mine is within a glacially scoured bedrock valley that is filled with more than 150 meters of glacial drift. A confined aquifer at the bottom of the glacial sediments (referred to as the lower confined aquifer, or LCA) was the source of most of the water that flooded the mine. Two rubble chimneys that formed above the roof collapses in 1994 hydraulically connect the flooded mine to the LCA through 180 meters of sedimentary rock. From 1996 through 2006, water levels in the aquifer system recovered and the brine-displacement rate ranged from 4.4 to 1.6 liters per second, as estimated from land-surface subsidence above the mine. A zone of fracturing within the bedrock (the deformation zone) formed around the rubble chimneys as rock layers sagged toward the mine cavity after the roof collapses. Borehole geophysical surveys have identified three saline-water-bearing fracture zones in the bedrock: at stratigraphic contacts between the Onondaga and Bertie Limestones (O/B-FZ) and the Bertie Limestone and the Camillus Shale (B/C-FZ), and in the Syracuse Formation (Syr-FZ). The only outlets for brine displaced from the mine are through the rubble chimneys, but some of the brine could be diverted laterally into fracture zones in the rocks that lie between the mine and the LCA. Inverse geochemical models developed using PHREEQC indicate that halite brine in the flooded mine is derived from a mixture of freshwater from the LCA (81 percent), saline water from bedrock fracture zones (16 percent), and an hypothesized bromide-rich brine (3 percent) assumed to originate from salt-bearing rocks above the flooded mine. Geochemical modeling results also indicate that halite brine entering the rubble chimneys is diluted by both bedrock water and aquifer water, and that water from the mine has not reached the bedrock surface. Forward geochemical models indicate that additional land subsidence could occur if pumping from the brine-mitigation project were to introduce either freshwater or bedrock water that is undersaturated with respect to anhydrite into the lower part of the rubble chimneys. In this unlikely scenario, the maximum subsidence rates are predicted to range from 0.6 to 1.1 centimeters per year—subsidence rates would be lower (0.1 to 0.6 centimeters per year) if ion-exchange reactions affect the water chemistry. Variable-density, transient groundwater-flow models were constructed using SEAWAT to simulate the movement of saline water, aquifer water, bedrock water, and brine within the rubble chimneys and surrounding deformation zone during the 10.7-year period following flooding of the salt mine. Two three-dimensional models reproduced the profile of halite saturation with depth measured in September 2006 reasonably well, and neither model indicated that saline water had migrated beyond the collapse area. The models differed in the number of fracture zones represented: one zone in model A (O/B-FZ) and three zones in model B (O/B-FZ, B/C-FZ, and Syr-FZ). It is unknown whether model A or model B better represents current conditions because the lateral extents of the B/C-FZ and Syr-FZ have not been delineated beyond the collapse area. In model A, the salinity of water in the upper part of the rubble chimneys is derived mainly from the inflow of bedrock water from the O/B-FZ, as indicated by geochemical models. Bedrock water that was pushed upward by brine during the 10.7-year simulation period formed a diffuse front above a nearly horizontal brine level in both chimneys. In model B, some of the salinity in the upper part of the rubble chimneys is derived from mine water. The rate of bedrock-water inflow from the O/B-FZ was lower in model B than in model A, and mixing with waters from the Syr-FZ and B/C-FZ transported mine water higher in the water column than in model A. Simulated brine levels in both chimneys sloped northward, reflecting lateral diversion of brine into the B/C-FZ, and less aquifer water was displaced from the collapse area than in model A. Models A and B were used to simulate changes in water levels and salinity produced by pumping for the brine-mitigation project from September 2006 through February 2008. Both simulations indicated that current pumping rates are sufficient to offset upward migration of brine and saline water through the collapse area and, therefore, to further prevent contamination of the LCA. A greater decrease in salinity was simulated in model B, however, because the porosity of the rubble chimneys was lower (6 percent compared to 10 percent in model A), and some brine and saline waters were diverted through the B/C-FZ. Model B better simulates the influent saturation to the desalination plant, the amount of halite produced, and the observed declines in saturations than model A, which is more consistent with results of geochemical modeling. Sensitivity analyses indicate that the actual brine-displacement rate could be lower than estimated because simulated declines in saturations underpredict the observed decline from September 2006 through February 2008. Although halite saturations within the upper part of the collapse area are predicted to decrease with continued pumping, brine displacement from the flooded mine is expected to continue for hundreds of years. Simulations of a shutdown of the brine-mitigation project indicate southward migration of saline water through the LCA, extending 700 meters to the model boundary within 10 years. Continued migration of saline water would eventually form a pool in the LCA in a bedrock depression 8 kilometers south of the collapse area near Sonyea, but the large relative density of the saline water would likely prevent it from reaching overlying aquifers. Simulations also indicate that brine will migrate through bedrock fracture zones—some brine could possibly emerge updip to the north where the subcrop area of the Bertie Limestone intersects the bedrock surface near Avon, but the projected time of travel is unknown.

New York↗

USGS2002

Preliminary hydrogeologic assessment and study plan for a regional ground-water resource investigation of the Blue Ridge and Piedmont provinces of North Carolina

Prolonged drought, allocation of surface-water flow, and increased demands on ground-water supplies resulting from population growth are focuses for the need to evaluate ground-water resources in the Blue Ridge and Piedmont Provinces of North Carolina. Urbanization and certain aspects of agricultural production also have caused increased concerns about protecting the quality of ground water in this region. More than 75 percent of the State's population resides in the Blue Ridge and Piedmont Provinces in an area that covers 30,544 square miles and 65 counties. Between 1940 and 2000, the population in the Piedmont and Blue Ridge Provinces increased from 2.66 to 6.11 million; most of this increase occurred in the Piedmont. Of the total population, an estimated 1.97 million people, or 32.3 percent (based on the 1990 census), relied on ground water for a variety of uses, including commercial, industrial, and most importantly, potable supplies. Ground water in the Blue Ridge and Piedmont traditionally has not been considered as a source for large supplies, primarily because of readily available and seemingly limitless surface-water supplies, and the perception that ground water in the Blue Ridge and Piedmont Provinces occurs in a complex, generally heterogeneous geologic environment. Some reluctance to use ground water for large supplies derives from the reputation of aquifers in these provinces for producing low yields to wells, and the few high-yield wells that are drilled seem to be scattered in areas distant from where they are needed. Because the aquifers in these provinces are shallow, they also are susceptible to contamination by activities on the land surface. In response to these issues, the North Carolina Legislature supported the creation of a Resource Evaluation Program to ensure the long-term availability, sustainability, and quality of ground water in the State. As part of the Resource Evaluation Program, the North Carolina Division of Water Quality, Groundwater Section, in cooperation with the U.S. Geological Survey, initiated a multiyear study of ground water in the Blue Ridge and Piedmont Provinces. The study began in 1999. Most of the study area is underlain by a complex, two-part, regolith-fractured crystalline rock aquifer system. Thickness of the regolith throughout the study area is highly variable and ranges from 0 to more than 150 feet. The regolith consists of an unconsolidated or semiconsolidated mixture of clay and fragmental material ranging in grain size from silt to boulders. Because porosities range from 35 to 55 percent, the regolith provides the bulk of the water storage within the Blue Ridge and Piedmont ground-water system. At the base of the regolith is the transition zone where saprolite grades into unweathered bedrock. The transition zone has been identified as a potential conduit for rapid ground-water flow. If this is the case, the transition zone also may serve as a conduit for rapid movement of contaminants to nearby wells or to streams with channels that cut into 1 U.S. Geological Survey, Raleigh, North Carolina. 2 North Carolina Department of Environment and Natural Resources, Division of Water Quality, Groundwater Section. or through the transition zone. How rapidly a contaminant moves through the system largely may be a function of the characteristics of the transition zone. The transition zone is one of several topics identified during the literature review and data synthesis, for which there is a deficiency in data and understanding of the processes involved in the movement of ground water to surface water. Because the Blue Ridge and Piedmont study area is so large, and the hydrogeology diverse, it is not feasible to study all of the area in detail. A more feasible approach is to select areas that are most representative of the land use, geology, and hydrology to obtain an understanding of the hydrologic processes in the selected areas, and transfer the knowledge from these local "type areas" to similar regional hydrogeologic areas. For the purpose of this study, the term "type area" applies to a 10- to 100-square mile area within a hydrogeologic terrane where information is sufficient to develop and test a concept of ground-water flow by using analytical or numerical methods that can be validated by field measurements. Ideally, these type areas are selected to be representative of the flow system that is present wherever a particular hydrogeologic terrane is present. This report consists of two basic parts. The first part describes the results of a comprehensive review and synthesis of information and literature that provides the basic background for the study. This includes current (2002) knowledge regarding general geology and the hydrogeologic framework of the fractured-rock aquifer system that underlies the Blue Ridge and Piedmont Provinces. In spite of the quantity of information identified during the literature review and the amount of past work that has been documented, there are still research needs to be met. The second part of the report describes State ground-water issues and problems, available data, and data deficiencies. It also describes the design and implementation of efforts to characterize ground-water quality and to quantify factors that influence the movement and availability of ground water in the hydrogeologic terranes characterized by (1) massive or foliated crystalline rocks overlain by thick regolith and (2) massive or foliated crystalline rocks overlain by thin regolith. As of September 2001, seven sites had been identified as potential study sites to be used to characterize the hydrogeology and water quality of ype areas considered representative of the larger terranes. Detailed geologic mapping, core drilling, well installation, and surface and borehole geophysical surveys are in progress at four of the sites.

North Carolina↗

USGS2016

Hydrologic assessment of the shallow groundwater flow system beneath the Shinnecock Nation tribal lands, Suffolk County, New York

Defining the distribution and flow of shallow groundwater beneath the Shinnecock Nation tribal lands in Suffolk County, New York, is a crucial first step in identifying sources of potential contamination to the surficial aquifer and coastal ecosystems. The surficial or water table aquifer beneath the tribal lands is the primary source of potable water supply for at least 6 percent of the households on the tribal lands. Oyster fisheries and other marine ecosystems are critical to the livelihood of many residents living on the tribal lands, but are susceptible to contamination from groundwater entering the embayment from the surficial aquifer. Contamination of the surficial aquifer from flooding during intense coastal storms, nutrient loading from fertilizers, and septic effluent have been identified as potential sources of human and ecological health concerns on tribal lands. The U.S. Geological Survey (USGS) facilitated the installation of 17 water table wells on and adjacent to the tribal lands during March 2014. These wells were combined with other existing wells to create a 32-well water table monitoring network that was used to assess local hydrologic conditions. Survey-grade, global-navigation-satellite systems provided centimeter-level accuracy for positioning wellhead surveys. Water levels were measured by the USGS during May (spring) and November (fall) 2014 to evaluate seasonal effects on the water table. Water level measurements were made at high and low tide during May 2014 to identify potential effects on the water table caused by changes in tidal stage (tidal flux) in Shinnecock Bay. Water level contour maps indicate that the surficial aquifer is recharged by precipitation and upgradient groundwater flow that moves from the recharge zone located generally beneath Sunrise Highway, to the discharge zone beneath the tribal lands, and eventually discharges into the embayment, tidal creeks, and estuaries that bound the tribal lands to the east, south, and west. Water levels in many of the wells in the network fluctuated in response to precipitation, upgradient groundwater flow, and tidal flux in Shinnecock Bay. Water level altitudes ranged from 6.66 to 0.47 feet (ft) above the North American Vertical Datum of 1988 during the spring measurement period, and from 5.25 to -0.24 ft (NAVD 88) during fall 2014. Historically, annual and seasonal precipitation seem to indicate long-term water level trends in an index well located in the town of Southampton, correlates with changes in storage in the upper glacial aquifer, but does not necessarily indicate water level extremes in the shallow groundwater system. To place the study period in perspective, calendar year 2014 was the 32d wettest year on record, with precipitation for the year totaling 48.1 inches, a 2.6-percent increase from the annual average (46.9 inches per year), based on 81 years of complete record at the National Oceanographic and Atmospheric Administration, National Weather Service cooperative meteorological station at Bridgehampton, New York. Estimated recharge to the water table beneath the tribal lands from precipitation for 2014 is 25.4 inches. Tidal flux caused water levels in wells to fluctuate from 0.30 to -0.24 ft during May 2014. Water levels in wells located north of Old Fort Pond and beneath the southernmost extent of the tribal lands were most influenced by tidal flux. During June 2014, hydrographs indicate that tidal flux influenced water levels by 0.48 ft in a well located near the southernmost extent of the tribal lands approximately 0.3 miles north of Shinnecock Bay, and was zero at a well located approximately 0.5 miles south of Montauk Highway, and 0.4 miles west of Heady Creek, near the geographic center of the tribal lands. Tidal-influence delay time (time interval between peak high-tide stage and corresponding peak high-water level) ranged from 1.75 hours at the well located near the southernmost extent of the tribal lands, to more than 4 hours at a well located north of Old Fort Pond, near the northwestern part of the tribal lands. Estimated hydraulic-conductivity values derived from the results of specific-capacity tests that were completed at nine observation wells during March 2015 were used to calculate average linear velocity. Average linear velocity along conceptualized flow-path segments of the upper glacial aquifer located beneath the tribal lands was estimated using an assumed effective porosity value, and hydraulic-conductivity and hydraulic-head values that were interpolated from measured values. Groundwater travel times were estimated by dividing the length of the flow-path segment by the average linear velocity along the flow-path segment. Total estimated groundwater travel time along a conceptualized flow path, beginning near Sunrise Highway and terminating at Shinnecock Bay, is approximately 45 years using a porosity value of 30 percent. A surficial-silty unit was identified from approximately 0 to 10 ft below land surface at multiple locations beneath the tribal lands. The lithology of the surficial unit was verified by interpreted gamma log results obtained from select wells, and auger-rig drill cuttings from an observation well located near the geographic center of the tribal lands. The altitude of the unit varies with topography and was delineated along a cross section line that trends north-south along the approximate centerline (spine) of the tribal lands. The altitude of the hydrogeologic contact between the upper glacial and the Magothy aquifers generally decreases from northwest to southeast, occurs at a depth ranging from about 150 to 200 ft beneath the tribal lands, and was identified at two locations north of the tribal lands, near Sunrise Highway and Sebonac Road. Results of electrical geophysical surveys indicate that the depth to the freshwater/saltwater interface decreases from north to south with decreasing water level altitude, and the Magothy and upper glacial aquifers contain saltwater at varying depths along the north-south trending section. Results of the surveys also indicate that the Magothy aquifer beneath the tribal lands contains brackish and salty water and is not considered a source of potable water supply. In general, depth to the interface increases with increasing geographic distance from the coastline. Low water table altitudes can result in increased saltwater encroachment into the surficial aquifer beneath the tribal lands. This upward movement and shallow depth of the freshwater/saltwater interface can jeopardize water quality in wells that supply water for domestic use.

New York↗