SEARCH · Search USGS

Results for “Remote Sensing and the Environment”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19Linked to original sources

USGS2019

Radiometric calibration of a non-imaging airborne spectrometer to measure the Greenland ice sheet surface

Methods to radiometrically calibrate a non-imaging airborne visible-to-shortwave infrared (VSWIR) spectrometer to measure the Greenland ice sheet surface are presented. Airborne VSWIR measurement performance for bright Greenland ice and dark bare rock/soil targets is compared against the MODerate resolution atmospheric TRANsmission (MODTRAN ® ) radiative transfer code (version 6.0), and a coincident Landsat 8 Operational Land Imager (OLI) acquisition on 29 July 2015 during an in-flight radiometric calibration experiment. Airborne remote sensing flights were carried out in northwestern Greenland in preparation for the Ice, Cloud, and land Elevation Satellite 2 (ICESat-2) laser altimeter mission. A total of nine science flights were conducted over the Greenland ice sheet, sea ice, and open-ocean water. The campaign's primary purpose was to correlate green laser pulse penetration into snow and ice with spectroscopic-derived surface properties. An experimental airborne instrument configuration that included a nadir-viewing (looking downward at the surface) non-imaging Analytical Spectral Devices (ASD) Inc. spectrometer that measured upwelling VSWIR (0.35 to 2.5 µ m) spectral radiance ( W m - 2 sr - 1 µ m - 1 "> W m − 2 sr − 1 µ m − 1 ) in the two-color Slope Imaging Multi-polarization Photon-Counting Lidar's (SIMPL) ground instantaneous field of view, and a zenith-viewing (looking upward at the sky) ASD spectrometer that measured VSWIR spectral irradiance (W m −2 nm −1 ) was flown. National Institute of Standards and Technology (NIST) traceable radiometric calibration procedures for laboratory, in-flight, and field environments are described in detail to achieve a targeted VSWIR measurement requirement of within 5 % to support calibration/validation efforts and remote sensing algorithm development. Our MODTRAN predictions for the 29 July flight line over dark and bright targets indicate that the airborne nadir-viewing spectrometer spectral radiance measurement uncertainty was between 0.6 % and 4.7 % for VSWIR wavelengths (0.4 to 2.0 µ m) with atmospheric transmittance greater than 80 %. MODTRAN predictions for Landsat 8 OLI relative spectral response functions suggest that OLI is measuring 6 % to 16 % more top-of-atmosphere (TOA) spectral radiance from the Greenland ice sheet surface than was predicted using apparent reflectance spectra from the nadir-viewing spectrometer. While more investigation is required to convert airborne VSWIR spectral radiance into atmospherically corrected airborne surface reflectance, it is expected that airborne science flight data products will contribute to spectroscopic determination of Greenland ice sheet surface optical properties to improve understanding of their potential influence on ICESat-2 measurements.

Atmospheric Measurement Techniques↗

USGS2012

A remote-sensing, GIS-based approach to identify, characterize, and model spawning habitat for fall-run chum salmon in a sub-arctic, glacially fed river

At northern limits of a species’ distribution, fish habitat requirements are often linked to thermal preferences, and the presence of overwintering habitat. However, logistical challenges and hydrologic processes typical of glacial systems could compromize the identification of these habitats, particularly in large river environments. Our goal was to identify and characterize spawning habitat for fall-run chum salmon Oncorhynchus keta and model habitat selection from spatial distributions of tagged individuals in the Tanana River, Alaska using an approach that combined ground surveys with remote sensing. Models included braiding, sinuosity, ice-free water surface area (indicating groundwater influence), and persistent ice-free water (i.e., consistent presence of ice-free water for a 12-year period according to satellite imagery). Candidate models containing persistent ice-free water were selected as most likely, highlighting the utility of remote sensing for monitoring and identifying salmon habitat in remote areas. A combination of ground and remote surveys revealed spatial and temporal thermal characteristics of these habitats that could have strong biological implications. Persistent ice-free sites identified using synthetic aperture radar appear to serve as core areas for spawning fall chum salmon, and the importance of stability through time suggests a legacy of successful reproductive effort for this homing species. These features would not be captured with a one-visit traditional survey but rather required remote-sensing monitoring of the sites through time.

Transactions of the American Fisheries Society↗

USGS2023

A 1.2 billion pixel human-labeled dataset for data-driven classification of coastal environments

The world’s coastlines are spatially highly variable, coupled-human-natural systems that comprise a nested hierarchy of component landforms, ecosystems, and human interventions, each interacting over a range of space and time scales. Understanding and predicting coastline dynamics necessitates frequent observation from imaging sensors on remote sensing platforms. Machine Learning models that carry out supervised (i.e., human-guided) pixel-based classification, or image segmentation, have transformative applications in spatio-temporal mapping of dynamic environments, including transient coastal landforms, sediments, habitats, waterbodies, and water flows. However, these models require large and well-documented training and testing datasets consisting of labeled imagery. We describe “Coast Train,” a multi-labeler dataset of orthomosaic and satellite images of coastal environments and corresponding labels. These data include imagery that are diverse in space and time, and contain 1.2 billion labeled pixels, representing over 3.6 million hectares. We use a human-in-the-loop tool especially designed for rapid and reproducible Earth surface image segmentation. Our approach permits image labeling by multiple labelers, in turn enabling quantification of pixel-level agreement over individual and collections of images.

Scientific Data↗

USGS2018

Mapping and measuring aeolian sand dunes with photogrammetry and LiDAR from unmanned aerial vehicles (UAV) and multispectral satellite imagery on the Paria Plateau, AZ, USA

The Paria Plateau is a potentially important but relatively unstudied aeolian sand source area in the Grand Canyon region of Arizona, USA. This study used unmanned aerial vehicle(UAV) - based LiDAR and structure-from-motion (SfM) photogrammetry to produce high-resolution topographic models of aeolian dunes on the plateau. We combined the dune topography data with a high-resolution satellite image maximum likelihood classification (producer's accuracy = 87.2%) to quantify potential aeolian sand source areas across the 958 km 2 plateau. We mapped all the unvegetated active aeolian dunes on the plateau and estimate they contain 24 Tg of sand, and could, therefore, be a proportionately important regional sand source considering the annual sand loads of the downwind Paria River at its confluence with the Colorado River are generally <1 Tg. The results and data from this study could be useful for future investigations that wish to explicitly link aeolian sand on the Paria Plateau to downwind sediment dynamics in the region. The methodology for UAV and satellite remote sensing that we demonstrate could be applied to quantify sand at large geographic extents in other aeolian environments around the world.

Arizona↗

USGS2005

Methods for synthesis of some jarosites

Experimental procedures in this report summarize attempts to synthesize potassium-, hydronium-, sodium-, and mixed-composition (hydronium-bearing) jarosites. After experimentation, some acceptable combinations of chemical and physical factors were found to routinely synthesize chemically different jarosites, which were used as part of a characterization study of some natural and synthetic jarosites. Jarosite is a sulfate mineral that is common in geologic settings where iron sulfide minerals such as pyrite or marcasite are subject to oxidative weathering. The presence of jarosite is a hallmark of acidic conditions. Jarosite forms as a secondary mineral in weathered sulfidic ores, coal mine wastes, on oxidizing mine wastes, and in streams affected by acid mine drainage. Jarosite also forms in acid-sulfate soils, as an alteration product of sulfidic shales, and in hydrothermal environments. Because of its important role in earth surface processes, the USGS is conducting mineralogical, geochemical, and remote sensing studies to characterize natural jarosites and to elucidate its stability range and conditions of formation. The presence of jarosite is not limited to the Earth. The recent identification of jarosite in the rocks at the Meridiani Planum on Mars has given planetary geologists reason to think that jarosite may be evidence of relict lacustrine (lake systems) or hydrothermal (water enriched magma emanations) systems on the Martian surface. USGS scientists are currently developing jarosite detection systems that can be placed on orbiting spectrometers. One day these systems may guide Mars landers to sites abundant in jarosite, sites most likely to have sheltered ancient Martian life.

Techniques and Methods↗

USGS2023

Artisanal mining river dredge detection using SAR: A method comparison

Challenges exist in monitoring artisanal and small-scale mining (ASM) activities, given their dynamic and often informal nature. ASM takes form through various techniques and scales, including riverine dredging, which often targets the abundant alluvial gold deposits in South America. Remote sensing offers a solution to improve data collection, regulation, and monitoring of the more mobile and elusive ASM activities and their impacts. Mapping ASM riverine dredges using Synthetic Aperture Radar (SAR) is one of the application areas least explored. Three semi-automated detection approaches using Sentinel-1 SAR are compared on their ability to identify dredges with minimal false positives. The methods are: (i) Search for Unidentified Maritime Objects (SUMO), an established method for large ocean ship detection; and two techniques specifically developed for riverine environments that are introduced in this paper: (ii) a local detection method; and (iii) a global threshold method. A visual interpretation of SAR data with the inclusion of optical high-resolution data are used to generate a validation dataset. Results show it is possible to semi-automatically detect riverine dredge using SAR and that a local detection method provides the best balance between sensitivity and precision and has the lowest risk of error. Future improvements may consider further automation, more discriminatory variables, and analyzing the methods in different environments and at higher spatial resolutions.

Remote Sensing↗

USGS2007

Climate Change Research at USGS Center for Earth Resources Observation and Science (EROS)

Research and development projects at EROS apply unique resources to support the USGS mission of developing understanding, monitoring, and modeling of climate variability and change and their human, physical, and biological impacts. Remote sensing resources, both new and archived, form the core of our ability to determine changes in the state or condition of the Earth’s surface and its dynamic landscape and ecosystem processes. This rich resource provides powerful biophysical information for local to global areas. Archival data form the basis for assessing human and climate impacts on the land surface, trends of land use, and an understanding of climate and management impacts. Biophysical information from satellite data is assimilated into quantitative models that allow all disciplines of the USGS to understand impacts on ecosystem processes. Major processes and problems we address include: carbon fluxes, hydrological processes, albedo changes and regional climates, mangroves and wetland protection of coastal environments, natural and manmade hazards (e.g., fire and drought), ecosystem change and succession, land use and land cover change, and more. The integration of remote sensing, modeling, and multidisciplinary approaches fosters international scientific leadership across all disciplines for the USGS.

Fact Sheet↗

USGS2001

Satellite images for land cover monitoring - Navigating through the maze

Policy makers, managers, scientists and the public can view the changing environment using satellite images. More than 60 Earth observing satellites are collecting images of the Earth's surface. Remote sensing satellite systems for land cover assessment are operated by a growing number of countries including India, the United States, Japan, France, Canada and Russia. The focus of this publication is satellite systems for land cover monitoring. On the reverse is a table that compares a selection of these systems, whose data are globally available in a form suitable for land cover analysis. We hope the information presented will help you assess the utility of remotely sensed image to meet your needs.

Report↗

USGS2000

Hydrogeology of the regional aquifer near Flagstaff, Arizona, 1994-97

Sandstones, siltstones, and limestones that are Pennsylvanian to Permian in age underlie the southern part of the Colorado Plateau near Flagstaff, Arizona, and contain a complex regional aquifer that has become increasingly important as a source of water for domestic, municipal, and recreational uses. Ground-water flow in the regional aquifer is poorly understood in this area because (1) depth of the aquifer limits exploratory drilling and testing and (2) the geologic structure increases the complexity of the aquifer characteristics and the ground-water flow system. Four methods were used to improve the understanding of the hydrogeology of the regional aquifer near Flagstaff. • Remote-sensing techniques and geologic mapping provided data to identify many structural features that indicate a more complex structural environment and history than previously realized. • Data from surface-geophysical techniques that included ground-penetrating radar, seismic reflection and seismic refraction, and square-array resistivity, verified that some of the geologic structures expressed at land surface propagate deep into the subsurface and through the principal water-bearing zones of the regional aquifer at near-vertical angles. • A well and spring inventory, borehole-geophysical methods, and well and aquifer tests provided additional information relating aquifer and ground-water flow characteristics to geologic structure. • Water-chemistry data, which included major ion, nutrient, trace-element, and radioactive and stable-isotope analyses, provided an independent means of verifying the hydrogeologic characteristics of the aquifer and were used to determine recharge and discharge areas, groundwater movement, and ground-water age. Ground-water recharge occurs throughout the area but is greatest at higher altitudes where precipitation is greater and in areas where heavily fractured rock units of the aquifer are exposed. The estimated annual average recharge to the regional aquifer in the study area is about 290,000 acre-feet. Ground water flows laterally and vertically through pore spaces in the rock and along faults and other fractures from high-altitude areas in the southern part of the study area to regional drains north of the study area along the Little Colorado and Colorado Rivers, and to drains south of the study area along Oak Creek and the Verde Valley. Ground-water discharge in these areas—about 400,000 acre-feet per year—exceeds the annual recharge to the aquifer in the Flagstaff area, but ground water from areas outside the study area contributes to this discharge as well. The saturated thickness of the regional aquifer averages about 1,200 feet, and the amount of water in storage could be as much as 4,800,000 acrefeet, or about 10 percent of the total volume of the aquifer. The quality of water in the regional aquifer in terms of dissolved-solids concentrations is good for most uses throughout the area. Dissolvedsolids concentrations generally are less than 500 milligrams per liter. Water in the regional aquifer is primarily a calcium magnesium bicarbonate type. In some areas near the Rio de Flag, the water has significant nitrate and chloride components, which indicate direct recharge in these areas from the Rio de Flag. Oxygen and deuterium data indicate a common recharge source for water in the aquifer and that some sites receive recharge from surface waters where evaporation has occurred. Estimated carbon-14 ages and tritium activities indicate ground-water ages from less than 200 years in the Lake Mary area to more than 5,000 years in the Wupatki area. The regional aquifer is heterogeneous and anisotrophic and has a complex ground-water flow system. The most productive water-bearing material tends to be fine- to medium-grained sandstones, and ground-water flow and potential well yields are related to geologic structure. Fracturing associated with structural deformation increases recharge locally and also increases the potential for high well yields. Surface-geophysical techniques provided information on the orientation of high-angle, deep-seated structure in the saturated zone. Borehole-geophysical data identified horizontal to near-horizontal fractures as significant components of the fracture-flow system not apparent in the surface-geophysical data. Structural features that strike northwest appear to be areas that have the greatest potential for high well yields. A north-northeastward-striking structure may be just as promising, but additional data are needed to verify this relation.

Arizona↗

USGS1981

Use of remote sensing for monitoring deforestation in tropical and subtropical latitudes

Of the three types of remotely sensed data discussed here, Landsat data offers the greatest potential for monitoring broad changes in extensive tropical forest environments because of its low-cost, synoptic, repetitive coverage. Scientists from developing countries can choose from a variety of Landsat data classification techniques, thus enabling each country to satisfy limitations on available funding, trained personnel, and equipment. Factors limiting the application of Landsat data—including relatively low spatial resolution, persistent cloud cover in tropical regions, inadequate coverage of certain areas due to data-acquisition restraints and lack of local Landsat data receiving stations for real-time data recording—must be considered in any proposed study. Future improvements in Landsat capabilities might extend present applications beyond distinction of forest vs. non-forest cover, determination of gross vegetation or forest type, and generalized land use mapping.

Ciencia Interamericana↗

USGS2007

Remotely Sensed Data Collections: Offerings from EROS

The U.S. Geological Survey (USGS) Center for Earth Resources Observation and Science (EROS) maintains a wide variety of remotely sensed data collections that contain a wealth of information about the Earth’s land surfaces. Acquired by special sensors carried aboard civilian satellites and aircraft, the images and other data in these collections provide a unique perspective of the terrestrial environment. They represent invaluable resources for scientists, resource managers, policy makers, and educators to use in studying such things as natural hazards, conservation issues, land use and economic development, and environmental change at local, regional, and global levels. Different types of sensors record different types of information, resulting in diverse data products, each with its own particular strengths. Highlighted here are eight remotely sensed data collections that are currently available from EROS.

Fact Sheet↗

USGS2021

Riverscape approaches in practice: Perspectives and applications

Landscape perspectives in riverine ecology have been undertaken increasingly in the last 30 years, leading aquatic ecologists to develop a diverse set of approaches for conceptualizing, mapping and understanding ‘riverscapes’. Spatiotemporally explicit perspectives of rivers and their biota nested within the socio-ecological landscape now provide guiding principles and approaches in inland fisheries and watershed management. During the last two decades, scientific literature on riverscapes has increased rapidly, indicating that the term and associated approaches are serving an important purpose in freshwater science and management. We trace the origins and theoretical foundations of riverscape perspectives and approaches and examine trends in the published literature to assess the state of the science and demonstrate how they are being applied to address recent challenges in the management of riverine ecosystems. We focus on approaches for studying and visualizing rivers and streams with remote sensing, modelling and sampling designs that enable pattern detection as seen from above (e.g. river channel, floodplain, and riparian areas) but also into the water itself (e.g. aquatic organisms and the aqueous environment). Key concepts from landscape ecology that are central to riverscape approaches are heterogeneity, scale (resolution, extent and scope) and connectivity (structural and functional), which underpin spatial and temporal aspects of study design, data collection and analysis. Mapping of physical and biological characteristics of rivers and floodplains with high-resolution, spatially intensive techniques improves understanding of the causes and ecological consequences of spatial patterns at multiple scales. This information is crucial for managing river ecosystems, especially for the successful implementation of conservation, restoration and monitoring programs. Recent advances in remote sensing, field-sampling approaches and geospatial technology are making it increasingly feasible to collect high-resolution data over larger scales in space and time. We highlight challenges and opportunities and discuss future avenues of research with emerging tools that can potentially help to overcome obstacles to collecting, analysing and displaying these data. This synthesis is intended to help researchers and resource managers understand and apply these concepts and approaches to address real-world problems in freshwater management.

Biological Reviews↗

USGS2024

Effect of water delivery and irrigation for riparian restoration in the Colorado River Delta, Mexico

Along Mexico's arid Colorado River Delta, the riparian corridor lacks water due to a reduction in frequent flows, climate change, human infrastructure, and altered riparian landcover from disturbances to invasive species, fire, and high soil and water salinities, which have led to declines in riparian plant health in recent decades. Restoration efforts focusing on small plots have successfully revitalized habitat, which is the motivation for this research. Accurate estimations of water use by riparian vegetation are crucial in arid environments, where measuring actual evapotranspiration (ETa) poses a significant challenge in these narrow corridors. This study utilizes field-validated remote sensing techniques to quantify ETa at restoration sites. Our methods are twofold; we use the Landsat-8 two-band Enhanced Vegetation Index (EVI2) to monitor changes in vegetation greenness—a proxy of plant health—and we integrate EVI2 with potential evapotranspiration (ET) to calculate ETa. Our findings reveal a notable increase in vegetation greenness within the restoration sites over 9 years, with an average increase of 41.3%. Conversely, greenness in adjacent, unrestored control areas declined by 27.3%. The study also indicates a 22.1% increase in ETa in the restored areas, compared to a 30.8% reduction in the unrestored regions. Restored sites in reach 4 experienced ETa increases ranging from 9.2 to 12.2%, whereas their unrestored counterparts show a decline of 21.4%. Valuable estimates are provided of riparian greenness and water use that may assist natural resource managers who are tasked with allocating water and managing habitats within similar riparian corridors.

Colorado River Delta↗

USGS2016

Sedimentologic characteristics of recent washover deposits from Assateague Island, Maryland

The U.S. Geological Survey has a long history of responding to and documenting the impacts of storms along the Nation’s coasts and incorporating these data into storm impact and coastal change vulnerability assessments. Although physical changes caused by tropical and extratropical storms to the sandy beaches and dunes fronting barrier islands are generally well documented, the interaction between sandy shoreline erosion and overwash with the back-barrier wetland and estuarine environments is poorly constrained. The goal of the Barrier Island and Estuarine Wetland Physical Change Assessment project is to integrate a wetland-change assessment with existing coastal-change assessments for the adjacent sandy dunes and beaches, initially focusing on Assateague Island along the Maryland and Virginia coastline. Assateague Island was impacted by waves and storm surge associated with the passage of Hurricane Sandy in October 2012, causing erosion and overwash along the ocean-facing sandy shoreline as well as erosion and overwash deposition in the back-barrier and estuarine bay environments. This report describes sediment data collected using sand augers in active overwash zones on Assateague Island in Maryland. Samples were collected by the U.S. Geological Survey (USGS) during two surveys in March/April and October 2014 (USGS Field Activity Numbers [FAN] 2014-301-FA and 2014-322-FA, respectively). The physical characteristics (for example, sediment texture or bedding structure) of and spatial differences among these deposits will provide information about overwash processes and sediment transport from the sandy barrier-island reaches to the back-barrier environments. Metrics derived from these data, such as mean grain size or deposit thicknesses, can be used to ground-truth remote sensing and geophysical data and can also be incorporated into sediment transport models. Data products, including sample location tables, descriptive core logs, core photographs and x-radiographs, the results of sediment grain-size analyses, and Geographic Information System (GIS) data files with accompanying formal Federal Geographic Data Committee (FGDC) metadata can be downloaded from the Data Downloads page.

Maryland↗

USGS1992

Remote sensing studies of the geomorphology of Surtsey, 1987-1991

The volcanic island of Surtsey, formed by explosive submarine and effusive subaerial eruptions between November 1963 and June 1967, consists of a complex combination of primary and redeposited tephra and alkaline olivine basalt lava flows in a 2.5 km 2 area (Thorarinsson, 1967; Thorarinsson et al., 1964; Fridriksson, 1975). During the past 24 years, wave and wind erosion of this subaerial mid-ocean ridge (MOR) vent complex have modified Surtsey's coastal morphology, including the deposition of a 0.5 km-long northern peninsula ( ness ) composed of tephra and rounded lava fragments derived from the southern half of the island. Detailed geomorphologic and sedimentologic mapping of the various surface units now present on Surtsey has been accomplished throughout the history of the evolving island, most recently by Calles et al. (1980) and Ingolfsson (1980). On the basis of these studies, an effort to quantify the topographic characteristics of the primary geomorphic units on the island was initiated by the National Aeronautics and Space Administration (NASA) and the United States Geological Survey (USGS) in 1987. The objective has been to directly measure the microtopographic properties of the widest range of surface types possible, with special emphasis on the pristine or dynamic types. While large-scale topographic maps of Surtsey were prepared in 1968 and 1975 (Norrman, 1980; Norrman and Erlingsson, 1991; Calles et al, 1980), and geodetic leveling surveys have been carried out (Moore, 1980), there have been no recent attempts to geodetically determine the local topography of the island. Because of the rapid rates of geomorphic processes, such as erosion and deposition, on a small, geologically isolated volcanic island such as Surtsey, it is desirable to determine the meter-scale topographic character of its surface units and landforms, and later a remeasurement of the same surfaces to further quantify volumetric change, subsidence, and process rates. In addition, precise measurements of sub-meter-scale topography of pristine geologic surfaces provides necessary data for the investigation of whether various geologic processes demonstrate fractal or self-affine behavior at a range of length-scales within the interval 0.1 in to 1 km. Thus Surtsey offers a unique opportunity to apply new remote sensing techniques to the measurement of the evolving surface "roughness" characteristics of pristine geologic surfaces within an historically well-monitored environment.

Surtsey Research Progress Report↗

USGS2015

Global land cover mapping using Earth observation satellite data: Recent progresses and challenges

Land cover is an important variable for many studies involving the Earth surface, such as climate, food security, hydrology, soil erosion, atmospheric quality, conservation biology, and plant functioning. Land cover not only changes with human caused land use changes, but also changes with nature. Therefore, the state of land cover is highly dynamic. In winter snow shields underneath various other land cover types in higher latitudes. Floods may persist for a long period in a year over low land areas in the tropical and subtropical regions. Forest maybe burnt or clear cut in a few days and changes to bare land. Within several months, the coverage of crops may vary from bare land to nearly 100% crops and then back to bare land following harvest. The highly dynamic nature of land cover creates a challenge in mapping and monitoring which remains to be adequately addressed. As economic globalization continues to intensify, there is an increasing trend of land cover/land use change, environmental pollution, land degradation, biodiversity loss at the global scale, timely and reliable information on global land cover and its changes is urgently needed to mitigate the negative impact of global environment change.

ISPRS Journal of Photogrammetry and Remote Sensing↗

USGS2026

Satellite time series analysis to quantify changing climax ciénegas using a state and transition model approach

Ciénegas are rare wetlands in arid landscapes of the North American Southwest, historically providing critical ecological and hydrological functions but increasingly threatened by changing climate and land use pressures. This study quantifies changes in ciénega condition and floodplain dynamics using a state-and-transition model (STM) informed by expert knowledge and remote sensing. Key factors include woody plant encroachment, water availability, and soil aggradation. We mapped 31 ciénegas with high-resolution imagery and analyzed Landsat data (1985–2023) to assess vegetation health and moisture using the Normalized Difference Vegetation Index (NDVI) and Normalized Difference Infrared Index (NDII). Results show substantial interannual variability in phenology, water stress, and soil moisture, with regional drying and elevation strongly influencing ciénega resilience. We classified ciénegas into three functional states—healthy, desiccated, and dormant—and mapped their 2023 condition. Trend analyses indicate most ciénegas exhibit greening despite drought, though localized variability underscores the need for site-specific management. None are in a stable climax (reference) state; rather, they transition among states in response to external drivers. Increasing woody plant cover and surface drying, likely linked to declining regional water tables, favor deep-rooted species over wetland grasses—a pattern mirrored in adjacent control plots. Spatially explicit analysis revealed intra-ciénega variability often masked by aggregated data, highlighting the importance of high-resolution monitoring. Seasonal and long-term trends provide context for understanding ciénega dynamics, including degradation and restoration pathways. This study emphasizes the importance of groundwater conservation and demonstrates how remote sensing supports long-term monitoring. The STM framework offers a practical tool for adaptive management to sustain freshwater resources in arid environments.

Arizona, New Mexico↗

USGS1975

Norfolk and environs: A land use perspective

The Norfolk-Portsmouth Standard Metropolitan Statistical Area (SMSA) in southeastern Virginia was the site of intensive testing of a number of land resources assessment methods, built around the availability of remotely sensed data from the Earth Resources Technology Satellite (ERTS-I), later renamed LANDSAT I. The Norfolk tests were part of a larger experiment known as the Central Atlantic Regional Ecological Test Site (CARETS), designed to test the extent to which LANDSAT and associated high-altitude aircraft data could be used as cost-effective inputs to a regional land use information system. The Norfolk SMSA contains a variety of land uses typical of the urbanized eastern seaboard, along with typical associated problems: rapid urbanization; heavy recreational, commercial, and residential demands on fragile beaches and coastal marsh environments; industrial, transportation, and governmental land and water uses impacting on residential and agricultural areas; drainage and land stability difficulties affecting construction and other uses; and increasing difficulties in maintaining satisfactory air and water quality.

Delaware;Maryl;New Jersey;North Carolina;Pennsylva↗