SEARCH · Search USGS

Results for “Mineral & Energy Resources”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18Linked to original sources

USGS2016

Multireaction equilibrium geothermometry: A sensitivity analysis using data from the Lower Geyser Basin, Yellowstone National Park, USA

A multireaction chemical equilibria geothermometry (MEG) model applicable to high-temperature geothermal systems has been developed over the past three decades. Given sufficient data, this model provides more constraint on calculated reservoir temperatures than classical chemical geothermometers that are based on either the concentration of silica (SiO 2 ), or the ratios of cation concentrations. A set of 23 chemical analyses from Ojo Caliente Spring and 22 analyses from other thermal features in the Lower Geyser Basin of Yellowstone National Park are used to examine the sensitivity of calculated reservoir temperatures using the GeoT MEG code (Spycher et al. 2013, 2014) to quantify the effects of solute concentrations, degassing, and mineral assemblages on calculated reservoir temperatures. Results of our analysis demonstrate that the MEG model can resolve reservoir temperatures within approximately ±15°C, and that natural variation in fluid compositions represents a greater source of variance in calculated reservoir temperatures than variations caused by analytical uncertainty (assuming ~5% for major elements). The analysis also suggests that MEG calculations are particularly sensitive to variations in silica concentration, the concentrations of the redox species Fe(II) and H 2 S, and that the parameters defining steam separation and CO 2 degassing from the liquid may be adequately determined by numerical optimization. Results from this study can provide guidance for future applications of MEG models, and thus provide more reliable information on geothermal energy resources during exploration.

Idaho, Montana, Wyoming↗

USGS2008

Scientific objectives of the Gulf of Mexico gas hydrate JIP leg II drilling

The Gulf of Mexico Methane Hydrate Joint Industry Project (JIP) has been performing research on marine gas hydrates since 2001 and is sponsored by both the JIP members and the U.S. Department of Energy. In 2005, the JIP drilled the Atwater Valley and Keathley Canyon exploration blocks in the Gulf of Mexico to acquire downhole logs and recover cores in silt- and clay-dominated sediments interpreted to contain gas hydrate based on analysis of existing 3-D seismic data prior to drilling. The new 2007-2009 phase of logging and coring, which is described in this paper, will concentrate on gas hydrate-bearing sands in the Alaminos Canyon, Green Canyon, and Walker Ridge protraction areas. Locations were selected to target higher permeability, coarser-grained lithologies (e.g., sands) that have the potential for hosting high saturations of gas hydrate and to assist the U.S. Minerals Management Service with its assessment of gas hydrate resources in the Gulf of Mexico. This paper discusses the scientific objectives for drilling during the upcoming campaign and presents the results from analyzing existing seismic and well log data as part of the site selection process. Alaminos Canyon 818 has the most complete data set of the selected blocks, with both seismic data and comprehensive downhole log data consistent with the occurrence of gas hydrate-bearing sands. Preliminary analyses suggest that the Frio sandstone just above the base of the gas hydrate stability zone may have up to 80% of the available sediment pore space occupied by gas hydrate. The proposed sites in the Green Canyon and Walker Ridge areas are also interpreted to have gas hydrate-bearing sands near the base of the gas hydrate stability zone, but the choice of specific drill sites is not yet complete. The Green Canyon site coincides with a 4-way closure within a Pleistocene sand unit in an area of strong gas flux just south of the Sigsbee Escarpment. The Walker Ridge site is characterized by a sand-prone sedimentary section that rises stratigraphically across the base of the gas hydrate stability zone and that has seismic indicators of gas hydrate.

Conference Paper↗

USGS1983

Mineral resource potential map of the Selway-Bitterroot Wilderness, Idaho County, Idaho, and Missoula and Ravalli counties, Montana

Mineral resource studies by the U.S. Bureau of Mines and the U.S, Geological Survey indicate that five areas within the Selway-Bitterroot Wilderness have mineral resource potential. Regional studies suggest that three granitic plutons within the wildemess, the Running Creek pluton on the southwestern border of the wildemess, the Painted Rocks pluton on the southern border of the wildemess, and the Whistling Pig pluton in the west-central portion of the wildemess, have low potential for molybdenite deposits, but detailed surface investigations failed to recognize a deposit. Placer deposits in the Elk Summit area on the north side of the wildemess contain subeconomic resources of niobium- (columbium-) bearing ilmenite. A vein on the northeast side of the wildemess at t~e Cliff mine at Saint Joseph Peak contains subeconomic silver-copper-lead resources. The wilderness has no known potential for oil and gas, coal, geothermal resources, or other energy-related commodities.

Idaho, Montana↗

USGS1973

Mineral resource potential of the Stillwater Complex and adjacent rocks in the northern part of the Mount Wood and Mount Douglas quadrangles, southwestern Montana

The Stillwater Complex contains the largest potential chromite and platinum metal resources and second largest nickel resources in the United States. The Ultramafic zone has produced about 900,000 long tons of chromite concentrate and contains unmined reserves equivalent to 2,520,000 long tons of Cr2O3. Nickel and copper sulfide minerals that occur in the Basal zone and adjacent hornfelsed metasedimentary rocks represent one of the largest nickel potentials in the United States---a known reserve of 150 million tons of 0.25 percent nickel and 0.25 percent copper. The complex has been estimated to contain the largest potential source of platinum metals in the United States---possibly over 150 million troy ounces in the lower chromite zones and the Basal zone. In addition, the anorthosites in the Banded and Upper zones are reported to represent a potential alumina resource of almost 2 billion tons. An iron-formation also is present in the adjacent Precambrian metasedimentary rocks, and a coal bed is present in the Upper Cretaceous Eagle Sandstone nearby. The eventual utilization of these resources depends on the availability of large quantities of energy, and thus they may not be recovered unless new sources of energy or new recovery techniques are developed.

Circular↗

USGS1979

Lithologic log, lithium content, and mineralogy of sediments penetrated in test boring drilled in Eureka Valley, Inyo County, California

A test boring was drilled in a playa in Eureka Valley, Calif., by the U.S. Geological Survey in the spring of 1978. Work was done under the terms of a cooperative agreement between the U.S. Geological Survey and the U.S. Bureau of Land Management to evaluate the leasable mineral potential of various playas in the California Desert Planning area, as described in the environmental analysis (prepared by the U.S. Geological Survey, 1978). The purpose of this report is to describe the occurrence and distribution of lithium in the basin sediments as part of a program to identify additional domestic resources of nonpegmatite lithium (Vine, 1978). Interest in this playa stems from the fact that Eureka Valley is located in a region where other lithium resources have been identified. Lithium is recovered from subsurface brines at Clayton Valley, Nev., to the north and at Searles Lake, Calif., to the south. Eureka Valley is a closed topographic basin that has an arid climate, it thus provides suitable conditions for the entrapment of a brine and subsequent concentration of lithium by evaporation. Development of new energy related uses for lithium in batteries for electric vehicle propulsion and for off-peak power storage by the utility industry (Chilenskas and others, 1977) may he aided by identification of a large domestic resource of lithium.

California↗

USGS2024

Utica/Point Pleasant brine isotopic compositions (δ7Li, δ11B, δ138Ba) elucidate mechanisms of lithium enrichment in the Appalachian Basin

Global Li production will require a ~500 % increase to meet 2050 projected energy storage demands. One potential source is oil and gas wastewater (i.e., produced water or brine), which naturally has high total dissolved solids (TDS) concentrations, that can also be enriched in Li (>100 mg/L). Understanding the sources and mechanisms responsible for high naturally-occurring Li concentrations can aid in efficient targeting of these brines. The isotopic composition (δ 7 Li, δ 11 B, δ 138 Ba) of produced water and core samples from the Utica Shale and Point Pleasant Formation (UPP) in the Appalachian Basin, USA indicates that depth-dependent thermal maturity and water-rock interaction, including diagenetic clay mineral transformations, likely control Li concentrations. A survey of Li content in produced waters throughout the USA indicates that Appalachian Basin brines from the Marcellus Shale to the UPP have the potential for economic resource recovery.

Maryland, Ohio, Pennsylvania, West Virginia↗

USGS2024

The advantages of electric-grade heat storage in long closed-loop wells

Though long (e.g., tens of kilometers) closed-loop geothermal wells are under consideration for the extraction of subsurface heat, these wells might also serve as an efficient energy storage mechanism for electricity generation. Using a semi-analytic model solution, the potential for electric-grade heat storage as a function of ambient temperature (e.g., corresponds to depth of loop), well length, well diameter, and flow rate is evaluated. The following simplified cases for comparison of standard closed loop operation with energy storage operation were considered: [1] constant flow rate and constant temperature (90 °C) injection to represent the standard closed-loop base-case; and [2] constant flow rate and annual cycle sinusoidal temperature (90-150 °C) to represent seasonal (summer) charging while solar resources are peak. Initial temperatures for all scenarios considered herein are a uniform 175 °C. Electric-grade heat is assumed to be delivered whenever temperatures at the extraction point exceed 90 °C. For calculation purposes only, if temperature falls below 100 °C, it is assumed that heat delivered is sub-economic, so no electricity would be produced. For all scenarios, temperatures at the extraction well asymptotically approach the flow-weighted average injection temperature, but energy storage scenarios exhibited a damped time-varying signal that diminishes in magnitude with length of the loop. The asymptotic approach depends on initial temperatures in the rock and the heat extraction rate (a function of well diameter and flowrate). This analysis demonstrates that shorter closed loops can produce more electricity over time than longer closed-loops previously proposed for electricity production over typical engineering design lifetimes (e.g., 30 years). Although only a high-temperature scenario is considered herein, rock that is initially below boiling temperature would not host a standard closed-loop resource, but injection of hot water seasonally would asymptotically heat this low-temperature system to temperatures capable of electricity production. In other words, regardless of initial temperatures, closed loops could be used to store electricity with no critical minerals in the geothermal battery.

Conference Paper↗

USGS2011

USGS global change science strategy: A framework for understanding and responding to climate and land-use change

This U.S. Geological Survey (USGS) Global Change Science Strategy expands on the Climate Variability and Change science component of the USGS 2007 Science Strategy, “Facing Tomorrow’s Challenges: USGS Science in the Coming Decade” (U.S. Geological Survey, 2007). Here we embrace the broad definition of global change provided in the U.S. Global Change Research Act of 1990 (Public Law 101–606,104 Stat. 3096–3104)—“Changes in the global environment (including alterations in climate, land productivity, oceans or other water resources, atmospheric chemistry, and ecological systems) that may alter the capacity of the Earth to sustain life”—with a focus on climate and land-use change. There are three major characteristics of this science strategy. First, it addresses the science required to broadly inform global change policy, while emphasizing the needs of natural-resource managers and reflecting the role of the USGS as the science provider for the Department of the Interior and other resource-management agencies. Second, the strategy identifies core competencies, noting 10 critical capabilities and strengths the USGS uses to overcome key problem areas. We highlight those areas in which the USGS is a science leader, recognizing the strong partnerships and effective collaboration that are essential to address complex global environmental challenges. Third, it uses a query-based approach listing key research questions that need to be addressed to create an agenda for hypothesis-driven global change science organized under six strategic goals. Overall, the strategy starts from where we are, provides a vision for where we want to go, and then describes high-priority strategic actions, including outcomes, products, and partnerships that can get us there. Global change science is a well-defined research field with strong linkages to the ecosystems, water, energy and minerals, natural hazards, and environmental health components of the USGS Science Strategy (2007). When science strategies that cover these other components are developed, coordinated implementation will be necessary to achieve Bureau-level synergies and optimize capabilities and expertise. In October 2010, USGS realigned its management and budget structure to implement its 2007 Science Strategy. The new organizational structure, in which “Global Change” is one of seven key mission areas, lends itself to the advancement of the established six strategic goals. USGS global change science is formally represented by the “Climate and Land-Use Change” Mission Area in the FY 2012 budget (USGS, 2011). This plan was developed by the USGS Global Change Science Strategy Planning Team (SSPT) appointed by the USGS Director on March 4, 2010 and charged with developing a Global Change Science Strategy for the coming decade (McNutt, 2010). USGS managers and science staff are the main audience for this science strategy. This document is also intended to serve as the foundation for consistent USGS collaboration and communication with partners and stakeholders.

Open-File Report↗

USGS2016

The chemistry and isotopic composition of waters in the low-enthalpy geothermal system of Cimino-Vico Volcanic District, Italy

Geothermal energy exploration is based in part on interpretation of the chemistry, temperature, and discharge rate of thermal springs. Here we present the major element chemistry and the δD, δ 18 O, 87 Sr/ 86 Sr and δ 11 B isotopic ratio of groundwater from the low-enthalpy geothermal system near the city of Viterbo in the Cimino-Vico volcanic district of west-Central Italy. The geothermal system hosts many thermal springs and gas vents, but the resource is still unexploited. Water chemistry is controlled by mixing between low salinity,HCO 3 -rich fresh waters (<24.2°C) flowing in shallow volcanic rocks and SO 4 -rich thermal waters (25.3°C to 62.2°C) ascending from deep, high permeability Mesozoic limestones. The (equivalent) SO 4 /Cl (0.01–0.02), Na/Cl (2.82–5.83) and B/Cl ratios (0.02–0.38) of thermal waters differs from the ratios in other geothermal systems from Central Italy, probably implying a lack of hydraulic continuity across the region. The δ 18 O (−6.6‰ to −5.9‰) and δD (−40.60‰ to −36.30‰) isotopic composition of spring water suggest that the recharge area for the geothermal system is the summit region of Mount Cimino. The strontium isotope ratios ( 87 Sr/ 86 Sr) of thermal waters (0.70797–0.70805) are consistent with dissolution of the Mesozoic evaporite-carbonate units that constitute the reservoir, and the ratios of cold fresh waters mainly reflect shallow circulation through the volcanic cover and some minor admixture (<10%) of thermal water as well. The boron isotopic composition (δ 11 B) of fresh waters (−5.00 and 6.12‰) is similar to that of the volcanic cover, but the δ 11 B of thermal waters (−8.37‰ to −4.12‰) is a mismatch for the Mesozoic reservoir rocks and instead reflects dissolution of secondary boron minerals during fluid ascent through flysch units that overlie the reservoir. A slow and tortuous ascent enhances extraction of boron but also promotes conductive cooling, partially masking the heat present in the reservoir. Overall data from this study is consistent with previous studies that concluded that the geothermal system has a large energy potential.

Journal of Volcanology and Geothermal Research↗

USGS2013

Chalcopyrite—bearer of a precious, non-precious metal

The mineral chalcopyrite (CuFeS 2 ) is the world's most abundant source of copper, a metal component in virtually every piece of electrical equipment. It is the main copper mineral in several different ore deposit types, the most important of which are porphyry deposits. Chalcopyrite is unstable at the Earth's surface, so it weathers from sulphide outcrops and mine waste piles, contributing acid and dissolved copper to what is known as acid rock drainage. If not prevented, dissolved copper from chalcopyrite weathering will be transported downstream, potentially harming ecosystems along the way. Pristine areas are becoming targets for future copper supply as we strive to meet ever-increasing demands for copper by developed and developing nations. Additionally, our uses for copper are expanding to include technology such as solar energy production. This has lead to the processing of increasingly lower grade ores, which is possible, in part, due to advances in bio-leaching (i.e. metal extraction catalysed by micro-organisms). Although copper is plentiful, it is still a nonrenewable resource. Future copper supply promises to fall short of demand and the volatility of the copper market may continue if we do not prioritize copper use and improve copper recycling and ore extraction efficiency.

Geology Today↗

USGS2020

An integrated feasibility study of reservoir thermal energy storage in Portland, Oregon, USA

In regions with long cold overcast winters and sunny summers, Deep Direct-Use (DDU) can be coupled with Reservoir Thermal Energy Storage (RTES) technology to take advantage of pre-existing subsurface permeability to save summer heat for later use during cold seasons. Many aquifers worldwide are underlain by permeable regions (reservoirs) containing brackish or saline groundwater that has limited beneficial use due to poor water quality. We investigate the utility of these relatively deep, slow flowing reservoirs for RTES by conducting an integrated feasibility study in the Portland Basin, Oregon, USA, developing methods and obtaining results that can be widely applied to groundwater systems elsewhere. As a case study, we have conducted an economic and social cost-benefit analysis for the Oregon Health and Science University (OHSU), a teaching hospital that is recognized as critical infrastructure in the Portland Metropolitan Area. Our investigation covers key factors that influence feasibility including 1) the geologic framework, 2) heat and fluid flow modeling, 3) capital and maintenance costs, 4) the regulatory framework, and 5) operational risks. By pairing a model of building seasonal heat demand with an integrated model of RTES resource supply, we determine that the most important factors that influence RTES efficacy in the study area are operational schedule, well spacing, the amount of summer heat stored (in our model, a function of solar array size), and longevity of the system. Generally, heat recovery efficiency increases as the reservoir and surrounding rocks warm, making RTES more economical with time. Selecting a base-case scenario, we estimate a levelized cost of heat (LCOH) to compare with other sources of heating available to OHSU and find that it is comparable to unsubsidized solar and nuclear, but more expensive than natural gas. Additional benefits of RTES include energy resiliency in the event that conventional energy supplies are disrupted (e.g., natural disaster) and a reduction in fossil fuel consumption resulting in a smaller carbon footprint. Key risks include reservoir heterogeneity and a possible reduction in permeability through time due to scaling (mineral precipitation). Lastly, a map of thermal energy storage capacity for the Portland Basin yields a total of 87,000 GWh, suggesting tremendous potential for RTES in the Portland Metropolitan Area.

Oregon↗

USGS1976

Mineral resources of Elko County, Nevada

Of the 66 named mining districts in Elko County, 56 have been productive of one or more of 19 different commodities: 11 metals--copper, gold, silver, lead, zinc, mercury, tungsten, manganese, iron, uranium, and antimony; 8 nonmetals--sand and gravel, stone, barite, diatomite, gems, oil shale, volcanic ash, and clay. In addition to the commodities produced, at least 5 others--beryllium, molybdenum, tin, phosphorite, and petroleum, occur in amounts sufficient to warrant exploration. The other districts have been explored, but no production has been recorded. Total value-when-sold of production recorded through 1969 was nearly $91 million; actual production was considerably greater, especially if sand and gravel, barite, and other nonmetallic products before 1953 are included. In value of metals produced, the five highest districts are Mountain City ($26 million), Tuscarora ($11 million), Jarbidge ($10 million), Aura ($6 million), and Railroad (nearly $5 million). The Rio Tinto copper mine in the Mountain City district yielded $21 million. Of the 17 districts that produced nonmetallic minerals, Bootstrap .is the largest producer, containing the Rossi mine, one of the two largest barite mines in the United States. Most of /he metals produced name from veins and replacement deposits in limestone or dolomite near granitic stocks; exceptions are manganese and mercury, which are not associated with known or inferred stocks; mercury is further excepted because it occurs in volcanic rocks, as do a few deposits of the major metals. The largest deposit--the Rio Tinto lode--was a combination of fissure filling and replacement along a bedding plane shear zone 150 ft wide and 1,200 ft long in carbonaceous shale of the Valmy Formation; this deposit is apparently older than the Mountain City stock and its mineralization may be related to Paleozoic mafic volcanism later than a major thrust fault, inferred to underlie the area at a depth of about 5,000 ft. Most of the nonmetallic minerals mined were sedimentary bedded deposits, but mica was mined from pegmatite deposits, and turquoise from both placer and hydrothermal deposits. The largest known reserves of metals (1973) are of porphyry copper in the Dolly Varden district and gold in the Bootstrap district. Reserves of barite also are presumed to be large. The greatest potential for future production of metals, notably copper and gold, appears to be in the known districts or extensions of them and peripheral to deposits that are related to known or concealed plutons and thrust faults. Potential resources in deposits too low in grade to be worked profitably at the present time include all commodities that have been produced and, in addition, known, deposits of beryllium, molybdenum, tin, and phosphorite. Speculative resources in undiscovered deposits may reasonably be predicted to include all known commodities as well as others that are unsuspected. Petroleum may yet be produced from the Elko Formation and geothermal energy from the Ruby Valley and Elko areas.

Open-File Report↗

USGS2021

Mapping critical minerals from the sky

Critical mineral resources titanium, zirconium, and rare earth elements occur in placer deposits over vast parts of the U.S. Atlantic Coastal Plain. Key questions regarding provenance, pathways of minerals to deposit sites, and relations to geologic features remain unexplained. As part of a national effort to collect data over regions prospective for critical minerals, the first public high-resolution aeroradiometric survey over the U.S. Atlantic Coastal Plain was conducted over Quaternary sediments in South Carolina. The new data provide an unprecedented view of potential deposits by imaging Th-bearing minerals in the heavy mineral assemblage. Sand ridges show the highest radiometric Th values with localized, linear anomalies, especially along the shoreface and in areas reworked by multiple processes and/or during multiple episodes. Estuarine areas with finer-grained sediments show lower, distributed Th anomalies. Th values averaged over geologic unit areas are similar for both environments, suggesting that heavy minerals are present but have not been locally concentrated in the lower-energy estuarine environments. Radiometric K highlights immature minerals such as mica and potassium feldspar. K is elevated within shallow sediments younger than ca. 130 ka, an attribute that persists in regional data from northern South Carolina to northern Florida. Both K and Th are elevated over the floodplains of the Santee River and other rivers with headwaters in the igneous and metamorphic Piedmont Terrane. The persistence of K anomalies for distances of more than 100 km from the Santee River floodplain suggests that heavy minerals are delivered from the Piedmont to offshore areas by major rivers, transported along the coast by the longshore current, and redeposited onshore by marine processes.

Florida, Georgia, South Carolina↗

USGS1994

Geologic history and hydrogeologic setting of the Edwards-Trinity aquifer system, west-central Texas

The Edwards-Trinity aquifer system underlies about 42,000 square miles of west-central Texas. Nearly flat-lying, mostly Comanche (Lower Cretaceous) strata of the aquifer system thin northwestward atop massive pre-Cretaceous rocks that are comparatively impermeable and structurally complex. From predominately terrigenous clastic sediments in the east and fluvialdeltaic (terrestrial) deposits in the west, the rocks of early Trinitian age grade upward into supratidal evaporitic and dolomitic strata, intertidal limestone and dolostone, and shallow-marine, openshelf, and reefal strata of late Trinitian, Fredericksburgian, and Washitan age. A thick, downfaulted remnant of mostly open-marine strata of Eaglefordian through Navarroan age composes a small, southeastern part of the aquifer system. The Trinity Group was deposited atop a rolling peneplain of pre-Cretaceous rocks during three predominately transgressive cycles of sedimentation that encroached upon the Llano uplift. The Fredericksburg and Washita Groups were deposited above the Trinity Group mostly in the lee of the Stuart City reef trend, a shelf margin ridge that sheltered depositional environments in the study area. The Washita Group subsequently was covered with thick, mostly fine-grained Gulf strata. During late Oligocene through early Miocene time, large-scale normal faulting formed the Balcones fault zone, where the Cretaceous strata were downfaulted, intensively fractured, and differentially rotated within a series of northeasttrending fault blocks. In addition to fracturing the rocks in the fault zone and extending the depth of freshwater diagenesis, the faulting vertically displaced the terrain, which steepened hydraulic gradients and maintained relatively high flow velocities near the surface. A shallow regime of dynamic ground-water flow evolved that promoted dissolution and enhanced the transmissivity of the Edwards Group in the Balcones fault zone. Cementation, recrystallization, and mineral replacement caused by deeper, comparatively sluggish ground-water circulation combined to diminish the transmissivity of the underlying Trinity Group, as well as most Cretaceous strata in the Hill Country, Edwards-Plateau, and Trans-Pecos. The Trinity, Fredericksburg, and Washita strata compose a regional aquifer system of three aquifers, whose water-transmitting characteristics generally are continuous in the lateral direction, and two hydraulically tight confining units. The aquifers are the Edwards aquifer in the Balcones fault zone, the Trinity aquifer in the Balcones fault zone and Hill Country, and the Edwards-Trinity aquifer in the Edwards Plateau and Trans-Pecos. The Navarro-Del Rio confining unit overlies the subcrop of the Edwards aquifer, and the Hammett confining unit lies within the updip, basal part of the Trinity aquifer and a small southeastern fringe of the Edwards-Trinity aquifer. The confining units are mostly calcareous mudstone, siltstone, and shale of low-energy terrigenous and openshelf marine depositional environments. The aquifers mainly result from fractures, joint cavities, and porosity caused by the dissolution of evaporites and unstable carbonate constituents. Because the diagenetic effects of cementation, recrystallization, and mineral replacement diminish the hydraulic conductivity of most rocks composing the Trinity and Edwards-Trinity aquifers, transmissivity values average less than 10,000 feet squared per day over more than 90 percent of the study area. However, the effects of tectonic fractures and dissolution in the Balcones fault zone cause transmissivity values to average about 750,000 feet squared per day in the Edwards aquifer, which occupies less than 10 percent of the study area.

Texas↗

USGS2025

USGS—An Unparalleled Scientific Asset

The U.S. Geological Survey (USGS) delivers information critical to powering our economy, managing our natural resources, and keeping Americans safe and healthy. 1 Mapping the Nation $21B Geologic maps save users an estimated 15% in annual costs: a value of between $14B and $21B. $25.6B in annual value to users of imagery from Landsat satellites, which were codeveloped by NASA and the USGS and operated through their lifespans by the USGS. $13.5B in annual benefits is generated by the USGS's 3D Elevation Program. Securing America’s Energy Independence 44% USGS-identified undiscovered geothermal energy is equal to 44% of current U.S. electricity generation. 29.4B barrels of oil and 391.6 trillion cubic feet of gas in recoverable resources are available on U.S. public lands based on USGS assessments. Protecting Americans’ Health and Safety $424B in recent wildland fire damages highlight the need for USGS fire science, which supports efforts to protect communities and reduce risk. USGS earthquake, volcano, landslide, and coastal hazard monitoring and information save lives and minimize costs; for example, $2.8M can be saved because of USGS enhanced information about a Mauna Loa eruption. $4.5B is the estimated cost of annual flooding. Through a network of over 11,885 streamgages, the USGS supports public safety and enables forecasts, early warning systems, and management actions that protect lives and property. Supporting National Security $3.1B The USGS identified a $3.1B risk to the American economy if China restricts gallium imports. This is one example underscoring the importance of the USGS mapping critical minerals, investigating supply chains, and producing the Nation’s critical minerals list. Enhancing Our Lands and Waters $21B in estimated annual costs results from invasive species. The USGS’s invasive species research informs approaches used to reduce their effects on agriculture, water infrastructure, disease transmission, fisheries, and outdoor recreation. USGS innovations support early warnings for harmful algal blooms—over $2M in yearly benefits are provided to Kansas alone. $45B USGS science informs the management of big game (such as deer and elk). The big-game hunting industry contributes $45B to the U.S. economy. Fostering American Prosperity $4.1T Mineral commodities are necessary for the $4.1T in value added to the GDP by major industries that consume processed mineral materials and employ 1 million workers. Because of this, USGS data on mineral supply, demand, and trade are highly valued. 45,000 metric tons Rare earths power the growing technology economy, including cell phones, electric vehicles, and medical devices. For over 70 years, USGS work has supported the discovery of rare earth resources in California’s Mountain Pass area, which produced 45,000 metric tons of rare earth concentrates in 2024—over 11% of the global supply. Guarding American Food Security $70.2B USGS science informs early warning systems and management strategies to mitigate disease outbreaks in agriculture—critical research on highly pathogenic avian influenza, for example, helps safeguard the $70B value in poultry and egg production. $11.8B USGS groundwater tools are vital for agriculture; for example, in the Mississippi Alluvial Plain, 65% of farming relies on groundwater to support its $11.8B annual industry. 1 Values throughout are given in billions (B), millions (M), and trillions (T) of U.S. dollars. GDP is “Gross Domestic Product.” Percentages are shown as %.

General Information Product↗

USGS2020

Evaluation of the analytical methods used to determine the elemental concentrations found in the stream geochemical dataset compiled for Alaska

A recent U.S. Geological Survey data compilation of stream-sediment geochemistry for Alaska contains decades of analyses collected under numerous Federal and State programs. The compiled data were determined by various analytical methods. Some samples were reanalyzed by a different analytical method than the original, resulting in some elements having concentrations reported by multiple analytical methods. Consideration of the analytical methods used to determine the elemental concentrations is an important step in a mineral prospectivity analysis. We used the compiled data to compare concentrations of barium (Ba), cobalt (Co), copper (Cu), chromium (Cr), nickel (Ni), lead (Pb), and zinc (Zn) determined by different analytical methods to show how simple data comparisons can identify bias and provide a general sense of the comparability of different analytical methods. The elements were selected because they have a range of geochemical properties that may affect the performance of different analytical procedures. Generally, agreement between Ba, Co, Cu, Cr, Ni, Pb, and Zn concentrations is good for most quantitative methods that use a total decomposition of the sample. However, Cr concentrations typically were lower for methods using quantitative-instrumental analysis following a multi-acid dissolution technique that included hydrofluoric acid compared to those using sinter decomposition. Additionally, low- to middle-range concentrations for Co, Cr, Cu, Ni, Pb, and Zn by instrumental neutron activation (NA) and energy-dispersive x-ray spectroscopy (EDX) analyzed by the National Uranium Resource Evaluation (NURE) program have high uncertainty. Concentrations determined by methods that use partial decomposition of the sample generally correspond well to concentrations determined by methods that use a total decomposition technique, except for Ba and Cr. For Ba and Cr, partial decomposition techniques yield lower concentrations than those determined by methods that use a total decomposition technique. Comparison of Ba, Co, Cr, Cu, Ni, Pb, and Zn concentrations determined by semiquantitative visual six-step direct-current arc emission spectrography (ES_SQ) to those determined by quantitative methods using either a total or partial decomposition technique consistently show scatter that exceeds the values expected based on the range represented by the semiquantitative concentration. The data compilation includes a best-value determination that was selected based on the analytical method from the all concentration data for that sample. Ba, Cr, Co, and Zn concentrations determined by NA usually are selected as the best-value determination. However, the NURE-NA method was designed for high throughput and the uncertainty associated with low- and mid-range concentrations is greater than that of the multi-acid method used to reanalyze many samples. Selection of the multi-acid method over the NURE-NA method for Ba, Co, and Zn could be warranted. Additionally, concentrations determined by ES_SQ usually are selected as the best-value determination over all methods that use a partial decomposition of the sample. Substitution of concentrations determined by methods that use a partial decomposition for those of ES_SQ may be warranted for Co, Cu, Ni, Pb, and Zn. Regardless of the selection of the best-value determination, the dataset remains a mixed method dataset and the uncertainty due to differences in analytical methodology must be considered when using the dataset.

Alaska↗

USGS2025

Geochemical processes related to mined, milled, or natural metal deposits in a rapidly changing global environment

The demand for metals and raw materials, such as nickel and copper, has been projected to expand in the coming decades, driven by the global energy transition, the need for green technologies, and expanding infrastructure. Consequently, the increasing extraction and production of mining waste can have adverse impacts on surrounding environments and human health. The aim of this thematic collection is to fill critical knowledge gaps in the present-day cycles of metal(loid)s from source to larger sinks, and the effect of environmental management, anthropogenic development, and climate change. Altogether, the studies have been conducted in different natural settings around the world and comprise investigations in laterites, a soil-medicinal plant system, watersheds, and banded iron formations, among others. The geochemical applications in tracing mineralization, its secondary products, and/or potential impact on the immediate environment are highly diverse with applied tools ranging from isotope tracers to major and trace element systematics. Particularly the use of rare earth elements, their patterns and anomalies are methods employed by several studies in this collection. We summarize the findings to offer a potential future direction for the use of geochemical tracing techniques in resource exploration in the context of climate change and environmental challenges.

Geochemistry: Exploration, Environment, Analysis↗

USGS1982

Reconnaissance geologic map and mineral resource potential of the Gearhart Mountain Wilderness and Roadless Area (6225), Lake and Klamath counties, Oregon

The Gearhart Mountain Wilderness, Lake and Klamath Counties, Oreg., is devoid of mines and mineral prospects and there are no known mining claims within the area. Furthermore, the results of this mineral appraisal indicate that there is little likelihood that commercial deposits of metallic minerals will be found in the area. Commercial uranium deposits, like those at the White King and Lucky Lass mines about 16 mi (~25 km) to the southeast of the wilderness, and deposits of mercury, like those south-southeast of the wilderness, are not likely to be found within the wilderness, even though all of these areas are characterized by middle and late Cenozoic intrusive and extrusive volcanic rocks. Rock of low commercial value for construction purposes is present, but better and more accessible deposits are present in adjacent regions. There is no evidence to indicate that mineral fuels are present in the area. Higher than normal heat floe characterizes the region containing Gerheart Mountain, indicating that it may have some, as yet undefined, potential for the development of geothermal energy. Data are not available to determine whether this higher than normal heat flow is meaningful in terms of a potential energy source or as a guide to possible future exploration; lack of thermal springs or other evidence of localized geothermal anomalies within the Gerhart Mountain suggest, however, that the potential for the development of geothermal energy is probably low.

Oregon↗