Search USGS⌕ Search

SEARCH · Search USGS

Results for “Letter Report”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18Linked to original sources
USGS2016

Metformin and other pharmaceuticals widespread in wadeable streams of the southeastern United States

Pharmaceutical contaminants are growing aquatic-health concerns and largely attributed to wastewater treatment facility (WWTF) discharges. Five biweekly water samples from 59 small Piedmont (United States) streams were analyzed for 108 pharmaceuticals and degradates using high-performance liquid chromatography and tandem mass spectrometry. The antidiabetic metformin was detected in 89% of samples and at 97% of sites. At least one pharmaceutical was detected at every site (median of 6, maximum of 45), and several were detected at ≥10% of sites at concentrations reported to affect multiple aquatic end points. Maximal cumulative (all detected compounds) concentrations per site ranged from 17 to 16000 ng L –1 . Watershed urbanization, water table depth, soil thickness, and WWTF metrics correlated significantly with in-stream pharmaceutical contamination. Comparable pharmaceutical concentrations and detections at sites with and without permitted wastewater discharges demonstrate the importance of non-WWTF sources and the need for broad-scale mitigation. The results highlight a fundamental biochemical link between global human-health crises like diabetes and aquatic ecosystem health.

Environmental Science & Technology Letters↗
USGS2012

Numerical simulations of the Shoemaker-Levy 9 impact plumes and clouds: A progress report

Preliminary 2D/3D numerical simulations were carried out for the penetration of 1-km bodies in the Jovian atmosphere and the subsequent rise and collapse of the erupted plumes. A body that crushed at a stagnation point pressure of 5 kbar produced a plume that rose to 800 km. Evolution of the shape of the calculated plume corresponds rather well to the plumes observed by HST. A crescent-shaped lobe centered on the “backfire” azimuth was produced by lateral flow during plume collapse. The plumes observed on Jupiter rose about 4 times higher, and their rise and fall times were about twice those in this calculation. Plume height is a sensitive function of the distribution of energy along the entry path; a very low-strength body will disintegrate higher along the penetration path and will produce a higher plume.

Geophysical Research Letters↗
USGS2026

The digital archivist: Automating legacy macroseismic data processing using large language models

Macroseismic data are a key resource to investigate shaking and damage from preinstrumental and early instrumental eras. However, data are often stored as inconsistently formatted reports describing observed shaking and damage, making manually parsing and interpreting accounts labor‐intensive. We introduce a novel workflow using Google’s Gemini 2.5 Pro large language model (LLM) to automate the extraction and structuring of macroseismic observations from summary reports. We apply this workflow to the 22 March 1957 M 5.3 Daly City, California, earthquake as a case study. We used Gemini to extract addresses, originally assigned modified Mercalli intensity values, and descriptions from each report. To address coordinate precision limits, addresses were geocoded via Google’s Geocoding application programming interface. This workflow yielded over 2300 geocoded intensity reports for the Daly City earthquake. We use the geocoded accounts, with the original report intensity assignments, to develop a shaking intensity map that in some respects rivals modern Did You Feel It? Maps. We also extract and present data for the 9 February 1971 M L 6.7 Sylmar, California, earthquake. Our results demonstrate the potential of LLMs for reliably extracting and analyzing large, unstructured macroseismic datasets. LLMs offer a scalable solution for rapidly digitizing macroseismic archives, enabling their broader use to constrain ground‐motion models in modern seismic hazard analysis and to improve our understanding of site effects in urban areas. The concepts explored here may also be applied to the handling of other legacy seismological and earth science data.

Seismological Research Letters↗
USGS2011

Incidence of adult brain cancers is higher in countries where the protozoan parasite Toxoplasma gondii is common

We explored associations between the common protozoan parasite Toxoplasma gondii and brain cancers in human populations. We predicted that T. gondii could increase the risk of brain cancer because it is a long-lived parasite that encysts in the brain, where it provokes inflammation and inhibits apoptosis. We used a medical geography approach based on the national incidence of brain cancers and seroprevalence of T. gondii . We corrected reports of incidence for national gross domestic product because wealth probably increases the ability to detect cancer. We also included gender, cell phone use and latitude as variables in our initial models. Prevalence of T. gondii explained 19 per cent of the residual variance in brain cancer incidence after controlling for the positive effects of gross domestic product and latitude among nations. Infection with T. gondii was associated with a 1.8-fold increase in the risk of brain cancers across the range of T. gondii prevalence in our dataset (4–67%). These results, though correlational, suggest that T. gondii should be investigated further as a possible oncogenic pathogen of humans.

Biology Letters↗
USGS2005

Revised magnitude-bound relation for the Wabash Valley seismic zone of the central United States

Seismic hazard assessment in the central United States, and in particular the Wabash Valley seismic zone of Indiana-Illinois, frequently relies on empirical estimates of paleoearthquake magnitudes ( M ). In large part these estimates have been made using the magnitude-bound method. Existing region-specific magnitude-bound relations rely heavily on only a few historical earthquakes in the central United States and eastern Canada that induced reported liquefaction features. Recent seismological studies have suggested smaller magnitudes than previously presumed for some of these earthquakes, however, and other studies have reinterpreted site-to-source distances to liquefaction features associated with some of these earthquakes. In this paper, we re-examine historical earthquakes ( M > ∼5) that occurred in the central and eastern United States and eastern Canada; some of these earthquakes triggered liquefaction and others did not. Based on our findings, we reinterpret the region-specific magnitude-bound relation for the Wabash Valley. Using this revised magnitude-bound relation, we present magnitude estimates for four prehistoric earthquakes that occurred in the Wabash Valley seismic zone during Holocene time.

Illinois, Indiana↗
USGS2015

Unusual downhole and surface free-field records near the Carquinez Strait bridges during the 24 August 2014 Mw6.0 South Napa, California earthquake

This paper reports the results of Part A of a study of the recorded strong-motion accelerations at the well-instrumented network of the two side-by-side parallel bridges over the Carquinez Strait during the 24 August 2014 (Mw6.0 ) South Napa, Calif. earthquake that occurred at 03:20:44 PDT with epicentral coordinates 38.22N, 122.31W. (http://earthquake.usgs.gov/earthquakes/eqarchives/poster/2014/20140824.php, last accessed on October 17, 2014). Both bridges and two boreholes were instrumented by the California Strong motion Instrumentation Program (CSMIP) of California Geological Survey (CGS) (Shakal et al., 2014). A comprehensive comparison of several ground motion prediction equations as they relate to recorded ground motions of the earthquake is provided by Baltay and Boatright (2015).

California↗
USGS2018

Spatial distribution of halogen oxides in the plume of Mount Pagan volcano, Mariana Islands

Halogens are emitted from volcanoes primarily as hydrogen halides (HCl, HF, HBr, and HI). Upon mixing with the atmosphere, chlorine and bromine species are partially converted to the halogen oxides OClO and BrO. Here we report on the spatial distribution of BrO and OClO in the gas plume emitted from Mount Pagan volcano, Northern Mariana Islands. We found enhanced BrO/SO 2 ratios near the plume edges and a lack of OClO in the plume's core. Our results highlight the importance of in‐mixing of atmospheric oxidants for halogen oxide formation. They indicate that OClO can only be formed after most bromide dissolved in plume aerosols has been released to the gas phase. We conclude that Mount Pagan's gas emissions originated from a shallow magma body and were transported to the surface along dry degassing pathways and that the volcano's halogen emissions likely had significant impact on the oxidation capacity of the downwind atmosphere.

Geophysical Research Letters↗
USGS2011

8 March 2010 Elazığ-Kovancilar (Turkey) Earthquake: observations on ground motions and building damage

An earthquake of M W = 6.1 occurred in the Elazığ region of eastern Turkey on 8 March 2010 at 02:32:34 UTC. The United States Geological Survey (USGS) reported the epicenter of the earthquake as 38.873°N-39.981°E with a focal depth of 12 km. Forty-two people lost their lives and 137 were injured during the event. The earthquake was reported to be on the left-lateral strike-slip east Anatolian fault (EAF), which is one of the two major active fault systems in Turkey. Teams from the Earthquake Engineering Research Center of the Middle East Technical University (EERC-METU) visited the earthquake area in the aftermath of the mainshock. Their reconnaissance observations were combined with interpretations of recorded ground motions for completeness. This article summarizes observations on building and ground damage in the area and provides a discussion of the recorded motions. No significant observations in terms of geotechnical engineering were made.

Seismological Research Letters↗
USGS1992

U.S. Geological Survey Library classification system

The U.S. Geological Survey library classification system has been designed for an earth science library. It is a tool for assigning classification numbers to earth science and allied pure science library materials in order to collect these materials into related subject groups on the library shelves and arrange them alphabetically by author and title. It can also be used as a retrieval system to access these materials through the subject and visible geographic classification numbers. The classification scheme has been developed over the years since 1904 to meet the ever-changing needs of increased specialization and new areas of study in the earth sciences. This system contains seven schedules: Subject schedule Geological survey schedule Earth science periodical schedule Government documents periodical schedule General science periodical schedule Earth science maps schedule Geographic schedule A geographic number, from the geographic schedule, is distinguished from other numbers in the system in that it is always enclosed in parentheses; for example, (200) is the geographic number for the United States. The geographic number is used in conjunction with the six other previously listed schedules, and it represents slightly different nuances of meanings, in respect to geographic locale, for each schedule. When used with a subject number, the geographic number indicates the country, state, province, or region in which the research was made. The subject number, 203, geology, when combined with the geographic number, (200), for example 203(200), is the classification number for library materials on the geology of the United States. The geographic number, combined with the capital letter G, for example, G(211), is the classification number for an earth science periodical issued by a geological association or university geology department in the State of Maine. When the letter S is combined with a geographic number, for example, S(276), it represents a general science periodical for a university or association in California. When the letter P is combined with a geographic number, for example, P(200), it represents a governmental periodical issued by the United States Federal Government. Geographic numbers standing alone represent classification numbers for the publications of geological surveys; for example, (200) represents publications of the U.S. Geological Survey. Map call numbers have a geographic number preceded by the capital letter M, followed by an abbreviated subject number. For example: M(200)2 where: M = Map (200) = Geographic region of the United States 2 = Abbreviation for the subject number 203— geology. The introduction, which follows this abstract, provides detailed procedures on the construction of complete call numbers for works falling into the framework of the aforesaid classification schedules. The tables following the introduction can be quickly accessed through the use of the newly expanded subject index. The purpose of this publication is to provide the earth science community with a classification and retrieval system for earth science materials, to provide sufficient explanation of its structure and use, and to enable library staff and clientele to classify or access research materials in a library collection.

Bulletin↗
USGS2024

PFAS river export analysis highlights the urgent need for catchment-scale mass loading data

Source apportionment of per- and polyfluoroalkyl substances (PFAS) requires an understanding of the mass loading of these compounds in river basins. However, there is a lack of temporally variable and catchment-scale mass loading data, meaning identification and prioritization of sources of PFAS to rivers for management interventions can be difficult. Here, we analyze PFAS concentrations and loads in the River Mersey to provide the first temporally robust estimates of PFAS export for a European river system and the first estimates of the contribution of wastewater treatment works (WwTWs) to total river PFAS export. We estimate an annual PFAS export of 68.1 kg for the River Mersey and report that the yield of perfluorooctanesulfonic acid (PFOS) and perfluorooctanoic acid (PFOA) in the catchment is among the highest recorded globally. Analysis of river and WwTW loads indicates approximately one-third of PFOA emitted from WwTWs is potentially stored in the catchment and approximately half of PFOS transported by the River Mersey may not originate from WwTWs. As governments move toward regulation of PFAS in WwTW effluents, our findings highlight the complexity of PFAS source apportionment and the need for catchment-scale mass loading data. This study indicates that strategies for reducing PFAS loading that focus solely on WwTW effluents may not achieve river water quality targets.

Environmental Science & Technology Letters↗
USGS2003

Monthly Strontium/Calcium oscillations in symbiotic coral aragonite: Biological effects limiting the precision of the paleotemperature proxy

In thermodynamic equilibrium with sea water the Sr/Ca ratio of aragonite varies predictably with temperature and the Sr/Ca ratio in coral have thus become a frequently used proxy for past Sea Surface Temperature (SST). However, biological effects can offset the Sr/Ca ratio from its equilibrium value. We report high spatial resolution ion microprobe analyses of well defined skeletal elements in the reef‐building coral Porites lutea that reveal distinct monthly oscillations in the Sr/Ca ratio, with an amplitude in excess of ten percent. The extreme Sr/Ca variations, which we propose result from metabolic changes synchronous with the lunar cycle, introduce variability in Sr/Ca measurements based on conventional sampling techniques well beyond the analytical precision. These variations can limit the accuracy of Sr/Ca paleothermometry by conventional sampling techniques to about 2°C. Our results may help explain the notorious difficulties involved in obtaining an accurate and consistent calibration of the Sr/Ca vs. SST relationship.

Geophysical Research Letters↗
USGS1996

Thermal conductivity of water-saturated rocks from the KTB pilot hole at temperatures of 25 to 300°C

The conductivitites of selected gneiss (two) and amphibolite (one) core samples have been measured under conditions of elevated temperature and pressure with a needle‐probe. Water‐saturated thermal conductivity measurements spanning temperatures from 25 to 300°C and hydrostatic pressures of 0.1 and 34 MPa confirm the general decrease in conductivity with increasing temperature but deviate significantly from results reported from measurements on dry samples over the same temperature range. The thermal conductivity of water‐saturated amphibolite decreases with temperature at a rate approximately 40% less than the rate for dry amphibolite, and the conductivity of water‐saturated gneiss decreases at a rate approximately 20% less than the rate for dry gneiss. The available evidence points to thermal cracking as the primary cause of the more rapid decrease in dry thermal conductivity with temperature. The effects of thermal cracking were also observed in the water‐saturated samples but resulted in a net decrease in room‐temperature conductivity of less than 3%. These results highlight the importance of duplicating in‐situ conditions when determining thermal conductivity for the deep crust.

Geophysical Research Letters↗
USGS2004

Preliminary report on the 22 December 2003, M 6.5 San Simeon, California earthquake

The M w 6.5 San Simeon earthquake struck the central California coast on 22 December 2003 at 19:15:56 UTC (11:15:56 am local time.) The epicenter was located 11 km northeast of the town of San Simeon, and 39 km west-northwest of Paso Robles ( Figure 1 ), as reported by the California Integrated Seismic Network (CISN, the California region of the Advanced National Seismic System [ANSS]). The mainshock nucleated at 35.702°N, 121.108°W and a depth of 7.1 km, and the rupture propagated unilaterally to the southeast. The strong directivity of the rupture resulted in a concentration of damage and aftershock activity to the southeast of the hypocenter. The worst earthquake damage occurred in Paso Robles, where two people died in the collapse of an unreinforced masonry building. The accurate and rapid earthquake information provided in near real-time by CISN/ANSS to the Governor's Office of Emergency Services made it possible to focus emergency response in the source area, although the earthquake was felt from San Francisco to Los Angeles. The San Simeon earthquake occurred on a reverse fault striking northwest and most likely dipping to the northeast. Although motion along the Pacific-North America plate boundary in California is dominantly strike-slip, there is a small compressional component through central California. Repeated thrust earthquakes such as the San Simeon event accommodate this compression and build the Coast Ranges. Other recent thrust earthquakes in central California include the 1983 Coalinga (M 6.4) and the 1985 Kettleman Hills (M 6.0) earthquakes. Prior earthquakes in the vicinity of the San Simeon event include a M 5-6 earthquake in 1853, a M 5.7 earthquake in 1906, and the M L 6.2 Bryson earthquake of 1952 ( Figure 1 ) ( McLaren and Savage, 2001 .) The San Simeon earthquake occurred on a previously unknown blind thrust fault. No surface rupture associated with the earthquake has been identified. A number of roads, including State Highway 46, buckled due to the earthquake, but this deformation appears mainly to be failure of road fill due to ground shaking and not the result of tectonic surface rupture. Extrapolation of the fault plane to the surface would roughly align with the surface trace of the Oceanic Fault, but this is thought to be a vertical strike-slip fault. Two models for the kinematics of the region have previously been proposed. The first is a fault-propagation fold model developed by Namson and Davis ( 1990 ) for the Santa Lucia mountains ∼30 km to the southeast of the San Simeon sequence. The mainshock geometry is similar to, although more steeply dipping than, the main blind thrust of this model, implying that this model may be applicable to the San Simeon region as well. The second is the model of McLaren and Savage ( 2001 ), in which the region is dominated by strike-slip faulting with shortening on high-angle reverse faults. This model also may be applicable, although the dip of the San Simeon mainshock is shallower than predicted. The San Simeon earthquake was followed by a vigorous aftershock sequence, with 165 events above M 3 reported by CISN within the first week of the mainshock. Although the event triggered many aftershocks, it did not significantly impact the seismicity rates of other nearby faults such as the San Andreas Fault and the San Simeon-Hosgri fault zone. The only triggered seismicity seems to be a few small events within the mainshock coda at the Geysers geothermal area, north of San Francisco. The San Simeon earthquake did, however, trigger shallow creep on the San Andreas Fault at Parkfield and hydrologic changes in hot springs in Paso Robles.

California↗
USGS2025

What 25+ years of "Did You Feel It" intensities tell us about shaking in California

“When will the Big One happen?” is a question that people often have for earthquake scientists. But while waiting for the “Big One” to occur, people will usually experience frightening or damaging shaking from multiple relatively smaller‐magnitude earthquakes. Given this context, it raises the question: “Where does most of the damage come from?” Could smaller, yet more frequent, earthquakes account for the majority of reported impactful shaking? To explore this question, we consider reports of earthquake damage and felt shaking experiences from a catalog of community‐collected intensity values from the U.S. Geological Survey’s “Did You Feel It?” system. Comparing these intensities to expectations from a ground‐motion model, we find that earthquakes of magnitudes smaller than expected are responsible for most reported intensities of community decimal intensities (CDI) 4.5 and above (moderate and higher shaking intensity levels). (Here “expected value” is meant in its mathematical sense of the mean or equivalently median shaking intensity.) We also present a regional analysis of observed earthquake shaking for specific areas, detailing the maximum intensity experienced within a predetermined area. We identify several instances of M < 4.5 events that generated maximum intensities of CDI > 5 in regions in California surrounding the cities of Eureka, San Francisco, Los Angeles, and San Diego. Our results motivate the need to include smaller‐magnitude earthquakes in communications about earthquake hazard and risk reduction.

California↗
USGS2007

The 17 July 2006 Tsunami earthquake in West Java, Indonesia

A tsunami earthquake (Mw = 7.7) occurred south of Java on 17 July 2006. The event produced relatively low levels of high-frequency radiation, and local felt reports indicated only weak shaking in Java. There was no ground motion damage from the earthquake, but there was extensive damage and loss of life from the tsunami along 250 km of the southern coasts of West Java and Central Java. An inspection of the area a few days after the earthquake showed extensive damage to wooden and unreinforced masonry buildings that were located within several hundred meters of the coast. Since there was no tsunami warning system in place, efforts to escape the large waves depended on how people reacted to the earthquake shaking, which was only weakly felt in the coastal areas. This experience emphasizes the need for adequate tsunami warning systems for the Indian Ocean region.

Seismological Research Letters↗
USGS2009

Photometric changes on Saturn's Titan: Evidence for active cryovolcanism

We report infrared spectrophotometric variability on the surface of Saturn's moon Titan detected in images returned by the Visual and Infrared Mapping Spectrometer (VIMS) onboard the Cassini Saturn Orbiter. The changes were observed at 7°S, 138°W and occurred between October 27, 2005 and January 15, 2006. After that date the surface was unchanged until the most recent observation, March 18, 2006. We previously reported spectrophotometric variability at another location (26°S, 78°W). Cassini Synthetic Aperture RADAR (SAR) images find that the surface morphology at both locations is consistent with surface flows possibly resulting from cryovolcanic activity (Wall et al., companion paper, this issue). The VIMS‐reported time variability and SAR morphology results suggest that Titan currently exhibits intermittent surface changes consistent with present ongoing surface processes. We suggest that these processes involve material from Titan's interior being extruded or effused and deposited on the surface, as might be expected from cryovolcanism.

Geophysical Research Letters↗
USGS2021

An evaluation of the timing accuracy of global and regional seismic stations and networks

Clock accuracy is a basic parameter of any seismic station and has become increasingly important for seismology as the community seeks to refine structures and dynamic processes of the Earth. In this study, we measure the arrival time differences of moderate repeating earthquakes with magnitude 5.0–5.9 in the time range of 1991–2017 at the same seismic stations by cross‐correlating their highly similar waveforms and thereby identify potential timing errors from the outliers of the measurements. The method has very high precision of about 10 ms and shows great potential to be used for routine inspection of the timing accuracy of historical and future digital seismic data. Here, we report 5131 probable cases of timing errors from 451 global and regional stations available from the Incorporated Research Institutions for Seismology Data Management Center, ranging from several tens of milliseconds to over 10 s. Clock accuracy seems to be a prevailing problem in permanent stations with long‐running histories. Although most of the timing errors have already been tagged with low timing quality, there are quite a few exceptions, which call for greater attention from network operators and the seismological community. In addition, seismic studies, especially those on temporal changes of the Earth’s media from absolute arrival times, should be careful to avoid misinterpreting timing errors as temporal changes, which is indeed a problem in some previous studies of the Earth’s inner core boundary.

Seismological Research Letters↗
USGS2016

Evidence for shallow megathrust slip across the Unalaska seismic gap during the great 1957 Andreanof Islands earthquake, eastern Aleutian Islands, Alaska

We reassess the slip distribution of the 1957 Andreanof Islands earthquake in the eastern part of the aftershock zone where published slip models infer little or no slip. Eyewitness reports, tide gauge data, and geological evidence for 9–23 m tsunami runups imply seafloor deformation offshore Unalaska Island in 1957, in contrast with previous studies that labeled the area a seismic gap. Here, we simulate tsunami dynamics for a suite of deformation models that vary in depth and amount of megathrust slip. Tsunami simulations show that a shallow (5–15 km deep) rupture with ~20 m of slip most closely reproduces the 1957 Dutch Harbor marigram and nearby >18 m runup at Sedanka Island marked by stranded drift logs. Models that place slip >20 km predict waves that arrive too soon. Our results imply that shallow slip on the megathrust in 1957 extended east into an area that presently creeps.

Geophysical Research Letters↗