SEARCH · Search USGS

Results for “Journal of Interpretation Research”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18Linked to original sources

USGS2012

The Redskin granite: Evidence for thermogravitational diffusion in a Precambrian granite batholith

The 1000-Ma-old composite Pikes Peak batholith consists largely of medium- to coarse-grained biotite granite but is intruded by several smaller granite plutons. Two of these, the Tarryall Mountains batholith and the Redskin Granite (Hawley, 1969; Hawley and Wobus, 1977), are here interpreted as cupolas atop the main mass of the Pikes Peak batholith. Chemical analysis for 38 elements in rocks from the Redskin Granite, the Tarryall Mountains batholith, and the biotite granite of the Pikes Peak batholith support the contention that the compositions of the smaller plutons are unlikely to have evolved from that of the main mass of the batholith by crystal fractionation. It is believed that these compositions arose through liquid-state fractionation processes, possibly the convection-aided thermogravitational model of Shaw et al. (1976). It is important to recognize that the chemical signature of this fractionation process can be discerned in holocrystalline rocks as well as in their glassy equivalents because the process may be instrumental in the formation of some kinds of lithophile ore deposits.

Journal of Geophysical Research Solid Earth↗

USGS2000

The enigma of the Arthur's Pass, New Zealand, earthquake: 1. Reconciling a variety of data for an unusual earthquake sequence

The 1994 Arthur's Pass earthquake ( M W 6.7) is the largest in a recent sequence of earthquakes in the central South Island, New Zealand. No surface rupture was observed, the aftershock distribution was complex, and routine methods of obtaining the faulting orientation of this earthquake proved contradictory. We use a range of data and techniques to obtain our preferred solution, which has a centroid depth of 5 km, M 0 =1.3 × 10 19 N m, and a strike, dip, and rake of 221°, 47°, 112°, respectively. Discrepancies between this solution and the Harvard centroid moment tensor, together with the Global Positioning System (GPS) observations and unusual aftershock distribution, suggest that the rupture may not have occurred on a planar fault. A second, strike slip, subevent on a more northerly striking plane is suggested by these data but neither the body wave modeling nor regional broadband recordings show any complexity or late subevents. We relocate the aftershocks using both one-dimensional and three-dimensional velocity inversions. The depth range of the aftershocks (1–10 km) agrees well with the preferred mainshock centroid depth. The aftershocks near the hypocenter suggest a structure dipping toward the NW, which we interpret to be the mainshock fault plane. This structure and the Harper fault, ∼15 km to the south, appear to have acted as boundaries to the extensive aftershock zone trending NNW-SSE. Most of the M L ≥ 5 aftershocks, including the two largest ( M L 6.1 and M L 5.7), clustered near the Harper fault and have strike slip mechanisms consistent with motion on this fault and its conjugates. Forward modeling of the GPS data suggests that a reverse slip mainshock, combined with strike slip aftershock faulting in the south, is able to match the observed displacements. The occurrence of this earthquake sequence implies that the level of seismic hazard in the central South Island is greater than previous estimates.

Arthur's Pass↗

USGS2010

Supraslab earthquake clusters above the subduction plate boundary offshore Sanriku, northeastern Japan: Seismogenesis in a graveyard of detached seamounts?

Thousands of offshore repeating earthquakes with low‐angle thrust focal mechanisms occur along the subduction plate boundary of NE Japan. Double‐difference relocation methods using P ‐ and S ‐wave arrivals reveal clusters of events above these repeating events. To assure good depth control we restrict our study to events that are close to seismic stations. These “supraslab” earthquake clusters are regional features at depths of 25 to 50 km, and most of these clusters are below the depth of the forearc Moho, which we determined from converted waves. Seismicity over this depth range does not occur under the inland area of NE Japan except just below the vicinity of the arc volcanoes. Re‐entrants in the inner trench slope indicate that repeated collisions of seamounts have occurred in the past. Our preliminary interpretation of supraslab clusters is that they represent seismicity in seamounts detached from the Pacific plate during slab descent, driven by the resistance of seamounts to subduction. Detachment during slab descent probably occurs on the sedimented and hydrothermally altered seafloor on which seamounts were originally constructed since these are known as zones of weakness during active island growth. High fluid pressure produced during dehydration of clay minerals and other low‐temperature hydrous minerals could enable detachment at depths. Seamount crust is thus accreted to forearcs, possibly leading to a long‐term component of near‐coastal uplift. Supraslab earthquake clusters may be our most direct evidence of the fates of seamounts and suggest that tectonic underplating is actively occurring in this subduction system.

Northeastern Japan↗

USGS2012

An interpretation of episodic slip on the Calaveras fault near Hollister, California

Data from a precision multi-wavelength distance measuring (MWDM) instrument, located near Hollister, California, have been analyzed in terms of strike-slip faulting in the region covered by the network. Four episodes of deformation that are readily identifiable in the MWDM data for the year following September 1975 can be modeled as slip on the Calaveras fault. Creepmeter data tend to support this interpretation, since the creep events and the observed episodes of deformation appear to be correlated in a temporal sense. Lower bounds on the moment for each episode of slip can be determined from the MWDM data by the technique of linear programing. The results indicate that aseismic slip is the dominant mechanism for strain release, since the combined moment of 1.16 × 10 24 dyn cm for the four episodes far exceeds the moment of all of the earthquakes that occurred during the year. Creepmeter data and geologic evidence that are taken in conjunction with the lower bound of the moment indicate that the depth of aseismic slip for some of the episodes of fault slip could extend to below the greatest depth of earthquake hypocenters for this region of central California.

Journal of Geophysical Research Solid Earth↗

USGS1997

Coseismic deformation of the Wrights tunnel during the 1906 San Francisco earthquake: A key to understanding 1906 fault slip and 1989 surface ruptures in the southern Santa Cruz Mountains, California

The Wrights tunnel is an abandoned railroad tunnel that crosses the San Andreas fault in the southern Santa Cruz Mountains in the vicinity of the 1989 Loma Prieta earthquake. The tunnel was damaged and deformed during the 1906 San Francisco earthquake and a plot showing postearthquake measurements made in the tunnel is given by Lawson [1908]. The amount of offset shown on this plot (1.5 m) has been used in several studies as being representative of the amount of fault offset along this segment of the San Andreas fault in 1906. Our historical research shows that different observers reported different amounts of fault offset in the tunnel and that the 1.5 m given on the plot is not a surveyed measurement. In addition, the plot of the tunnel has been interpreted in several previous studies as evidence of a broad (1.5 km) zone of faulting beneath Summit Ridge. Our analysis shows that this plot need not indicate a broad zone of deformation. Our historical research and modeling of the tunnel measurements indicate that faulting was confined to a zone less than 400 m wide and that 60–85% of the coseismic slip occurred across a single fault plane. There is no evidence for offset across a second shear zone beneath Summit Ridge in 1906. This implies that surface fractures reported on Summit Ridge in 1906 were not associated with significant deformation of the tunnel, implying that they were shallow, surficial features. By analogy, the very similar fractures that occurred on Summit Ridge in 1989 were also probably the result of shallow gravitational, rather than deep-seated tectonic, processes. Our modeling also indicates that total coseismic, near-surface slip across the San Andreas fault zone in the Wrights tunnel in 1906 was at least 1.7–1.8 m.

Journal of Geophysical Research B: Solid Earth↗

USGS2021

The Independent Volcanic Eruption Source Parameter Archive (IVESPA, version 1.0): A new observational database to support explosive eruptive column model validation and development

Eruptive column models are powerful tools for investigating the transport of volcanic gas and ash, reconstructing past explosive eruptions, and simulating future hazards. However, the evaluation of these models is challenging as it requires independent estimates of the main model inputs (e.g. mass eruption rate) and outputs (e.g. column height). There exists no database of independently estimated eruption source parameters (ESPs) that is extensive, standardized, maintained, and consensus-based. This paper introduces the Independent Volcanic Eruption Source Parameter Archive (IVESPA, ivespa.co.uk), a community effort endorsed by the International Association of Volcanology and Chemistry of the Earth’s Interior (IAVCEI) Commission on Tephra Hazard Modelling. We compiled data for 134 explosive eruptive events, spanning the 1902-2016 period, with independent estimates of: i) total erupted mass of fall deposits; ii) duration; iii) eruption column height; and iv) atmospheric conditions. Crucially, we distinguish plume top versus umbrella spreading height, and the height of ash versus sulphur dioxide injection. All parameter values provided have been vetted independently by at least two experts. Uncertainties are quantified systematically, including flags to describe the degree of interpretation of the literature required for each estimate. IVESPA also includes a range of additional parameters such as total grain size distribution, eruption style, morphology of the plume (weak versus strong), and mass contribution from pyroclastic density currents, where available. We discuss the future developments and potential applications of IVESPA and make recommendations for reporting ESPs to maximize their usability across different applications. IVESPA covers an unprecedented range of ESPs and can therefore be used to evaluate and develop eruptive column models across a wide range of conditions using a standardized dataset.

Journal of Volcanology and Geothermal Research↗

USGS2016

Continental rupture and the creation of new crust in the Salton Trough rift, southern California and northern Mexico: Results from the Salton Seismic Imaging Project

A refraction and wide-angle reflection seismic profile along the axis of the Salton Trough, California and Mexico, was analyzed to constrain crustal and upper mantle seismic velocity structure during active continental rifting. From the northern Salton Sea to the southern Imperial Valley, the crust is 17-18 km thick and approximately one-dimensional. The transition at depth from Colorado River sediment to underlying crystalline rock is gradual and is not a depositional surface. The crystalline rock from ~3 to ~8 km depth is interpreted as sediment metamorphosed by high heat flow. Deeper felsic crystalline rock could be stretched pre-existing crust or higher grade metamorphosed sediment. The lower crust below ~12 km depth is interpreted to be gabbro emplaced by rift-related magmatic intrusion by underplating. Low upper-mantle velocity indicates high temperature and partial melting. Under the Coachella Valley, sediment thins to the north and the underlying crystalline rock is interpreted as granitic basement. Mafic rock does not exist at 12-18 depth as it does to the south, and a weak reflection suggests Moho at ~28 km depth. Structure in adjacent Mexico has slower mid-crustal velocity and rocks with mantle velocity must be much deeper than in the Imperial Valley. Slower velocity and thicker crust in the Coachella and Mexicali valleys define the rift zone between them to be >100 km wide in the direction of plate motion. North American lithosphere in the central Salton Trough has been rifted apart and is being replaced by new crust created by magmatism, sedimentation, and metamorphism.

Journal of Geophysical Research↗

USGS1998

Effects of slip, slip rate, and shear heating on the friction of granite

The stability of fault slip is sensitive to the way in which frictional strength responds to changes in slip rate and in particular to the effective velocity dependence of steady state friction Δμ ss /Δ ln V . This quantity can vary substantially with displacement, temperature and slip rate. To investigate the physical basis for this behavior and the possible influence of shear heating, we slid initially bare granite surfaces in unconfined rotary shear to displacements of hundreds of millimeters at normal stresses, σ n of 10 and 25 MPa and at room temperature. We imposed step changes in slip rate within the range 10 −2 to 10 3.5 μm/s and also monitored frictional heating with thermistors embedded in the granite. The transient response of μ to slip rate steps was fit to a rate- and state-dependent friction law using two state variables to estimate the values of several parameters in the constitutive law. The first 20 mm of slip shows rising friction and falling Δμ ss /Δ ln V ; further slip shows roughly constant friction, Δμ ss /Δ ln V and parameter values, suggesting that a steady state condition is reached on the fault surface. At V ≤ 10 μm/s, Δμ ss /Δ ln V = −0.004 ± 0.001. At higher rates the response is sensitive to normal stress: At σ n = 25 MPa granite shows a transition to effective velocity strengthening (Δμ ss /Δ ln V = 0.008 ± 0.004) at the highest slip rates tested. At 10 MPa granite shows a less dramatic change to Δμ ss /Δ ln V ≈ 0 at the highest rates. The maximum temperature measured in the granite is ∼60°C at 25 MPa and 10 3.5 μm/s. Temperatures are in general agreement with a numerical model of heat conduction which assumes spatially homogeneous frictional heating over the sliding surface. The simplest interpretation of our measurements of Δμ ss /Δ ln V is that the granite is inherently velocity weakening (∂μ ss /∂ ln V < 0) and temperature strengthening (∂μ ss /∂ T −1 < 0) at all velocities. At high slip rates the response of μ to changes in temperature from shear heating may outweigh the response to changing velocity, such that the net effect Δμ ss /Δ ln V > 0 mimics velocity strengthening. These results have implications for the frictional behavior of faults during earthquakes. High slip rates may cause a switch to effective velocity strengthening which could limit peak coseismic slip rate and stress drop. For fluid-saturated faults, strengthening by this mechanism may be partly or fully offset by weakening due to thermal pressurization of a poorly drained pore fluid.

Journal of Geophysical Research B: Solid Earth↗

USGS1991

Crustal structure of the western New England Appalachians and the Adirondack Mountains

Presents an interpretation of the crustal velocity structure based on a seismic refraction/wide-angle reflection experiment in eastern North America extending from the Adirondacks in New York State through the northern Appalachians in Vermont and New Hampshire to central Maine. Modeling of the eastern portion of the profile within the New England Appalachians shows a subhorizontal layered crust with upper crustal velocities ranging from 5.5 to 6.2 km/s, a midcrustal velocity of 6.4 km/s, and a lower crustal velocity of approximately 6.8 km/s. Crustal thickness increases from 36 km beneath Maine to 40 km in Vermont. This experiment provides further evidence for the obduction of the allochthonous western Appalachian units onto Grenvillian crust above the azone of detachment that penetrates at least to midcrustal depths and was the locus of successive Paleozoic thrusting. -from Authors

Journal of Geophysical Research↗

USGS2007

Geology and geochronology of the Spirit Mountain batholith, southern Nevada: Implications for timescales and physical processes of batholith construction

The Spirit Mountain batholith (SMB) is a ∼ 250 km2 composite silicic intrusion located within the Colorado River Extensional Corridor in southernmost Nevada. Westward tilting of 40–50° has exposed a cross-section from the roof through deep levels of the batholith. Piecemeal construction is indicated by zircon geochronology, field relations, and elemental geochemistry. Zircon U/Pb data (SHRIMP) demonstrates a ∼ 2 million year (17.4–15.3 Ma) history for the SMB. Individual samples contain zircons with ages that span the lifetime of the batholith, suggesting recycling of extant zircon into new magma pulses. Field relations reveal several distinct intrusive episodes and suggest a common injection geometry of stacked horizontal sheets. The largest unit of the SMB is a gradational section (from roof downward) of high-silica leucogranite through coarse granite into foliated quartz monzonite. Solidification of this unit spans most of the history of the batholith. The 25 km × 2 km leucogranite was emplaced incrementally as subhorizontal sheets over most or all of the history of this section, suggesting repeated fractional crystallization and melt segregation events. The quartz monzonite and coarse granite are interpreted to be cumulate residuum of this fractionation. Age data from throughout this gradational unit show multiple zircon populations within individual samples. Subsequent distinct intrusions that cut this large unit, which include minor populations of zircons that record the ages of earlier events in construction of the batholith, preserve a sheeted, sill-on-sill geometry. We envision the SMB to have been a patchwork of melt-rich, melt-poor, and entirely solid zones throughout its active life. Preservation of intrusion geometries and contacts depended on the consistency of the host rock. Zircons recycled into new pulses of magma document remobilization of previously emplaced crystal mush, suggesting the mechanisms by which evidence for initial construction of the batholith became blurred.

Nevada↗

USGS1977

Hydrologic characteristics of the Madison Limestone, the Minnelusa Formation, and equivalent rocks as determined by well-logging formation evaluation, Wyoming, Montana, South Dakota, and North Dakota

Geophysical logs from wells distributed throughout the Powder River Basin were digitized, processed, and interpreted to get a regional understanding of the lithologic and ground-water characteristics of aquifers in the Madison Limestone and Minnelusa Formation. The percentage of sand, porosity, and apparent ground-water resistivity of the Minnelusa closely follow structural trends in the basin. Values increase from the structural axis of the basin toward the flanks. Close correlations between the water resistivities in the Madison and the Minnelusa indicate possible hydrologic connection between the two units. The low primary porosity from geophysical logs in the Madison indicates that secondary porosity is necessary to develop water supplies of economic importance from the Madison. Because of increased porosity and better water quality, the flanks of the basin appear to be the most favorable places for water production from either the Madison or the Minnelusa.

Wyoming, Montana, South Dakota, North Dakota↗

USGS2011

Spatiotemporal evolution of dike opening and décollement slip at Kīlauea Volcano, Hawai'i

Rapid changes in ground tilt and GPS positions on Kīlauea Volcano, Hawai'i, are interpreted as resulting from a shallow, two‐segment dike intrusion into the east rift zone that began at 1217 UTC (0217 HST) on 17 June 2007 and lasted almost 3 days. As a result of the intrusion, a very small volume of basalt (about 1500 m 3 ) erupted on 19 June. Northward tilt at a coastal tiltmeter, subsidence of south flank GPS sites, southeastward displacements at southwestern flank GPS sites, and a swarm of flank earthquakes suggest that a slow slip event occurred on the décollement beneath Kīlauea's south flank concurrent with the rift intrusion. We use 4 min GPS positions that include estimates of time‐dependent tropospheric gradients and ground tilt data to study the spatial and temporal relationships between the two inferred shallow, steeply dipping dike segments extending from the surface to about 2 km depth and décollement slip at 8 km depth. We invert for the temporal evolution of distributed dike opening and décollement slip in independent inversions at each time step using a nonnegative least squares algorithm. On the basis of these inversions, the intrusion occurred in two stages that correspond spatially and temporally with concentrated rift zone seismicity. The dike opening began on the western of the two segments before jumping to the eastern segment, where the majority of opening accumulated. Dike opening preceded the start of décollement slip at an 84% confidence level; the latter is indicated by the onset of northward tilt of a coastal tiltmeter. Displacements at southwest flank GPS sites began about 18 h later and are interpreted as resulting from slow slip on the southwestern flank. Additional constraints on the evolution of the intrusion and décollement slip come from inversion of an Envisat interferogram that spans the intrusion until 0822 UTC on 18 June 2007, combined with GPS and tilt data. This inversion shows that up to 0822 UTC on 18 June, décollement slip is only required in a limited region offshore of Ka'ena Point. A similar inversion of the complete event, which includes GPS and tilt data up to 21 June and a second Envisat interferogram spanning the complete intrusion until 21 June, shows décollement slip spread westward across the south flank. This may suggest westward migration of the décollement slip as the event progressed.

Hawaii↗

USGS1978

Conductive heat flows in research drill holes in thermal areas of Yellowstone National Park, Wyoming

In convection systems with boiling springs, geysers, fumaroles, and other thermal features, the modes of heat flow become increasingly complex as a single liquid phase at depth rises into the near-surface environment where heat flows by convection of liquid and vapor and by conduction in high thermal gradients. This paper is mainly concerned with the changing patterns of conductive heat flow as related to channels of subsurface convective flow and to horizontal distance from spring vents. The primary data consist of temperatures measured in 13 cored drill holes as drilling progressed. Some temperatures plot convincingly on straight-line segments that suggest conductive gradients in rocks of nearly constant thermal conductivity. Temperature gradients and the conductive component of total heat flow nearly always decrease drastically downward; the gradient and heat flow of the lowest depth interval recognized in each hole is commonly only about 10 percent of the highest interval; the changes in gradient at interval boundaries are commonly interpreted as channels of near-boiling water or of cooler meteoric water. Temperature reversals are probably related to inflowing cooler water rather than to transient effects from recent changes. Some temperatures plot on curved segments that probably indicate dispersed convective upflow and boiling of water in ground penetrated by the drill hole. Other similar curved segments are too low in temperature for local boiling and are probably on the margins of hot upflow zones, reflecting conductive cooling of flowing water. The conifers of Yellowstone National Park (mainly lodgepole pine) seem to have normal growth characteristics where near-surface conductive heat flow is below about 200 heat-flow units (1 HFU = 10 -6 cal/cm 2 = 41.8 mW/m 2 ). Most areas of abnormal "stunted" trees (low ratio of height to base diameter, and low density of spacing) are characterized by conductive heat flows of about 250 to 350 HFU. The critical factor affecting growth is probably the seasonal maximum soil temperature at the root depths preferred by each form, rather than the heat flow as such. Heat flows up to 300 HFU are greatly dominated near the surface by conduction and are little affected by convection within the measured intervals. With increasing total heat flow above 300 HFU, the convection component, as indicated by snowfall calorimetry, becomes increasingly important. Snowfall calorimetry and tree growth as related to heat flow are calibrated by the heat-flow data considered here. Both snowfall calorimetry and tree growth patterns can be extrapolated rapidly, although without high precision, to thermal areas that lack subsurface data.

Wyoming↗

USGS2017

Magnetotelluric imaging of lower crustal melt and lithospheric hydration in the Rocky Mountain Front transition zone, Colorado, USA

We present an electrical resistivity model of the crust and upper mantle from two‐dimensional (2‐D) anisotropic inversion of magnetotelluric data collected along a 450 km transect of the Rio Grande rift, southern Rocky Mountains, and High Plains in Colorado, USA. Our model provides a window into the modern‐day lithosphere beneath the Rocky Mountain Front to depths in excess of 150 km. Two key features of the 2‐D resistivity model are (1) a broad zone (~200 km wide) of enhanced electrical conductivity (<20 Ωm) in the midcrust to lower crust that is centered beneath the highest elevations of the southern Rocky Mountains and (2) hydrated lithospheric mantle beneath the Great Plains with water content in excess of 100 ppm. We interpret the high conductivity region of the lower crust as a zone of partially molten basalt and associated deep‐crustal fluids that is the result of recent (less than 10 Ma) tectonic activity in the region. The recent supply of volatiles and/or heat to the base of the crust in the late Cenozoic implies that modern‐day tectonic activity in the western United States extends to at least the western margin of the Great Plains. The transition from conductive to resistive upper mantle is caused by a gradient in lithospheric modification, likely including hydration of nominally anhydrous minerals, with maximum hydration occurring beneath the Rocky Mountain Front. This lithospheric “hydration front” has implications for the tectonic evolution of the continental interior and the mechanisms by which water infiltrates the lithosphere.

Colorado↗

USGS2014

Organic petrology of the Aptian-age section in the downdip Mississippi Interior Salt Basin, Mississippi, USA: Observations and preliminary implications for thermal maturation history

This study identifies a thermal maturity anomaly within the downdip Mississippi Interior Salt Basin (MISB) of southern Mississippi, USA, through examination of bitumen reflectance data from Aptian-age strata (Sligo Formation, Pine Island Shale, James Limestone, and Rodessa Formation). U.S. Geological Survey (USGS) reconnaissance investigations conducted in 2011–2012 examined Aptian-age thermal maturity trends across the onshore northern Gulf of Mexico region and indicated that the section in the downdip MISB is approaching the wet gas/condensate window (R o ~1.2%). A focused study in 2012–2013 used 6 whole core, one sidewall core, and 49 high-graded cutting samples (depth range of 13,000–16,500 ft [3962.4–5029.2 m] below surface) collected from 15 downdip MISB wells for mineralogy, fluid inclusion, organic geochemistry, and organic petrographic analysis. Based on native solid bitumen reflectance (R o generally > 0.8%; interpreted to be post-oil indigenous bitumens matured in situ), R o values increase regionally across the MISB from the southeast to the northwest. Thermal maturity in the eastern half of the basin (R o range 1.0 to 1.25%) appears to be related to present-day burial depth and shows a gradual increase with respect to depth. To the west, thermal maturity continues to increase even as the Aptian section shallows structurally on the Adams County High (R o range 1.4 to > 1.8%). After evaluating the possible thermal agents responsible for increasing maturity at shallower depths (i.e., igneous activity, proximity to salt, variations in regional heat flux, and uplift), we tentatively propose that either greater paleoheat flow or deeper burial coupled with uplift in the western part of the MISB could be responsible for the thermal maturity anomaly. Further research and additional data are needed to determine the cause(s) of the thermal anomaly.

International Journal of Coal Geology↗

USGS2009

Marine electrical resistivity imaging of submarine groundwater discharge: Sensitivity analysis and application in Waquoit Bay, Massachusetts, USA

Electrical resistivity imaging has been used in coastal settings to characterize fresh submarine groundwater discharge and the position of the freshwater/salt-water interface because of the relation of bulk electrical conductivity to pore-fluid conductivity, which in turn is a function of salinity. Interpretation of tomograms for hydrologic processes is complicated by inversion artifacts, uncertainty associated with survey geometry limitations, measurement errors, and choice of regularization method. Variation of seawater over tidal cycles poses unique challenges for inversion. The capabilities and limitations of resistivity imaging are presented for characterizing the distribution of freshwater and saltwater beneath a beach. The experimental results provide new insight into fresh submarine groundwater discharge at Waquoit Bay National Estuarine Research Reserve, East Falmouth, Massachusetts (USA). Tomograms from the experimental data indicate that fresh submarine groundwater discharge may shut down at high tide, whereas temperature data indicate that the discharge continues throughout the tidal cycle. Sensitivity analysis and synthetic modeling provide insight into resolving power in the presence of a time-varying saline water layer. In general, vertical electrodes and cross-hole measurements improve the inversion results regardless of the tidal level, whereas the resolution of surface arrays is more sensitive to time-varying saline water layer.

Massachusetts↗

USGS2015

Final project memorandum: sea-level rise modeling handbook: resource guide for resource managers, engineers, and scientists

Coastal wetlands of the Southeastern United States are undergoing retreat and migration from increasing tidal inundation and saltwater intrusion attributed to climate variability and sea-level rise. Much of the literature describing potential sea-level rise projections and modeling predictions are found in peer-reviewed academic journals or government technical reports largely suited to reading by other Ph.D. scientists who are more familiar or engaged in the climate change debate. Various sea-level rise and coastal wetland models have been developed and applied of different designs and scales of spatial and temporal complexity for predicting habitat and environmental change that have not heretofore been synthesized to aid natural resource managers of their utility and limitations. Training sessions were conducted with Federal land managers with U.S. Fish and Wildlife Service, National Park Service, and NOAA National Estuarine Research Reserves as well as state partners and nongovernmental organizations across the northern Gulf Coast from Florida to Texas to educate and to evaluate user needs and understanding of concepts, data, and modeling tools for projecting sea-level rise and its impact on coastal habitats and wildlife. As a result, this handbook was constructed from these training and feedback sessions with coastal managers and biologists of published decision-support tools and simulation models for sea-level rise and climate change assessments. A simplified tabular context was developed listing the various kinds of decision-support tools and ecological models along with criteria to distinguish the source, scale, and quality of information input and geographic data sets, physical and biological constraints and relationships, datum characteristics of water and land elevation components, utility options for setting sea-level rise and climate change scenarios, and ease or difficulty of storing, displaying, or interpreting model output. The handbook is designed to be a primer to understanding sea-level rise and a practical synthesis of the current state of knowledge and modeling tools as a resource guide for DOl land management needs and facilitating Landscape Conservation Cooperative (LCC) research and conservation initiatives.

Conference Paper↗

USGS2002

Remotely sensed geology from lander-based to orbital perspectives: Results of FIDO rover May 2000 field tests

Blind field tests of the Field Integration Design and Operations (FIDO) prototype Mars rover were carried out 7-16 May 2000. A Core Operations Team (COT), sequestered at the Jet Propulsion Laboratory without knowledge of test site location, prepared command sequences and interpreted data acquired by the rover. Instrument sensors included a stereo panoramic camera, navigational and hazard-avoidance cameras, a color microscopic imager, an infrared point spectrometer, and a rock coring drill. The COT designed command sequences, which were relayed by satellite uplink to the rover, and evaluated instrument data. Using aerial photos and Airborne Visible and Infrared Imaging Spectrometer (AVIRIS) data, and information from the rover sensors, the COT inferred the geology of the landing site during the 18 sol mission, including lithologic diversity, stratigraphic relationships, environments of deposition, and weathering characteristics. Prominent lithologic units were interpreted to be dolomite-bearing rocks, kaolinite-bearing altered felsic volcanic materials, and basalt. The color panoramic camera revealed sedimentary layering and rock textures, and geologic relationships seen in rock exposures. The infrared point spectrometer permitted identification of prominent carbonate and kaolinite spectral features and permitted correlations to outcrops that could not be reached by the rover. The color microscopic imager revealed fine-scale rock textures, soil components, and results of coring experiments. Test results show that close-up interrogation of rocks is essential to investigations of geologic environments and that observations must include scales ranging from individual boulders and outcrops (microscopic, macroscopic) to orbital remote sensing, with sufficient intermediate steps (descent images) to connect in situ and remote observations.

Journal of Geophysical Research E: Planets↗