Search USGS⌕ Search

SEARCH · Search USGS

Results for “The Depositional Record”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17Linked to original sources
USGS2020

Depositional sequence stratigraphy of Turonian to Santonian sediments, Cape Fear arch, North Carolina Coastal Plain, USA

A new sequence stratigraphic framework for Turonian to Santonian (94-84 Ma) sediments is established using data from the USGS Kure Beach and Elizabethtown cores collected from the Atlantic Coastal Plain of North Carolina (NC). These sediments represent some of the oldest marine units deposited on the southeastern Atlantic Coastal Plain and record the early development of a clastic wedge atop crystalline basement. Sediments were deposited as transitional marginal-marine to marine units in a complex interplay of fluvial, estuarine, and shelf environments. Repetitive lithologies and minimal biostratigraphic control requires an integrated analysis of grain-size data, geophysical logs, biostratigraphy, and 87Sr/86Sr isotopic data to identify systems tracts and establish a sequence stratigraphic framework. From this integrated approach, three Turonian to Santonian sequences in the Elizabethtown core and six in the Kure Beach core are identified. The new sequences from oldest to youngest are Clubhouse II, Fort Fisher I, Fort Fisher II, Collins Creek I, Collins Creek II, Pleasant Creek I, and Pleasant Creek II. Sequences from North Carolina document significant shifts of global and regional sea-level during greenhouse conditions in the early Late Cretaceous. Maximum sea-level rise occurred globally during the early Turonian and is documented from the marine sediments of the Clubhouse II sequence. This sequence is unconformably overlain by terrestrial sediments deposited during a major fall in sea level and maximum progradation of the shoreline, as evidenced by the Fort Fisher I sequence. Global sea-level rise in the Coniacian resulted in the deposition of the Fort Fisher II sequence, which is present only in the Kure Beach core. Local marine circulation and erosion on the shelf is suggested by the absence of the Collins Creek I sequence at Kure Beach; this sequence is present only in the up-dip Elizabethtown core. Activation of a possible buried fault structure along the Cape Fear arch resulted in the formation of a regional depocenter during the late Coniacian to early Santonian and is reflected in the unusual thickness of the Collins Creek II and Pleasant Creek I sequences. The return to a more global sea-level influence occurred in the late Santonian with the deposition of the Pleasant Creek II sequence. A comparison of temporal distribution of sequences in the Elizabethtown and Kure Beach cores to corresponding sequences in New Jersey indicates significant differences in erosional and tectonic processes in the Cape Fear region during the Turonian and Santonian.

North Carolina↗
USGS2025

Hydrogeologic mapping and three-dimensional geologic modeling of glacial deposits in a multicounty area of southeastern Michigan, northeastern Indiana, and northwestern Ohio

The glacial deposits underlying southeastern Michigan, northeastern Indiana, and northwestern Ohio are a substantial source of water to communities, agriculture, and industry in the region. Previous efforts to characterize aquifer materials in the area cited a need for additional information about the underlying hydrogeologic characteristics and related groundwater availability as well as improved mapping of the extent and properties of the glacial deposits. Recent U.S. Geological Survey multi-State compilations of water-well drilling records have greatly increased access to high-resolution geologic data, particularly in glacial depositional environments. This study by the U.S. Geological Survey, in cooperation with the Ohio Environmental Protection Agency, uses processed data from the State-managed collections of well records to characterize the glacial deposits in the study area using two methods. The first method creates two-dimensional maps of basic hydrogeologic information commonly required for assessments of groundwater availability, including (1) total thickness of glacial deposits, (2) total thickness of coarse-grained deposits, (3) specific-capacity-based transmissivity and hydraulic conductivity, and (4) texture-based estimated equivalent horizontal and vertical hydraulic conductivity and transmissivity. The second method builds a hydrogeologic framework of the complex glacial aquifer through construction of a volumetric geologic model by using three-dimensional kriging. Results of the volumetric model indicate that aquifer materials are primarily concentrated in the western parts of the study area near the Indiana-Ohio border. Coarse-grained sediments are also present as surficial deposits in the north of the study area where intermixing glacial advances created complex distributions of unconsolidated deposits. Two-dimensional maps of hydrogeologic properties support the volumetric model, showing thicknesses of coarse-grained deposits that reach up to 250 feet in the western sections of the study area and progressively thin to near absence in the east. Visualization of the aquifer materials with a volumetric model generally shows a highly discontinuous distribution of coarse- and fine-grained materials, with no clearly defined boundaries to delineate the extent of the aquifer. Comparisons of cross sections derived from the volumetric model with existing published maps support previous near-surface hydrogeologic interpretations while filling gaps where data are sparse, particularly in deeper parts of the aquifer. Both the two-dimensional maps and the volumetric model provide data that can directly inform assessments of groundwater availability, in addition to having future applications to studies of groundwater flow and transport.

Indiana, Michigan, Ohio↗
USGS2009

Carbon isotope chemostratigraphy and precise dating of middle Frasnian (lower Upper Devonian) Alamo Breccia, Nevada, USA

At Hancock Summit West, Nevada, western USA, uppermost Givetian (upper Middle Devonian) and lower and middle Frasnian (lower Upper Devonian) rocks of the lower Guilmette Formation include, in stratigraphic sequence, carbonate-platform facies of the conodont falsiovalis , transitans , and punctata Zones; the type Alamo Breccia Member of the middle punctata Zone; and slope facies of the punctata and hassi Zones. The catastrophically deposited Alamo Breccia and related phenomena record the ~ 382 Ma Alamo event, produced by a km-scale bolide impact into a marine setting seaward of an extensive carbonate platform fringing western North America. Re-evaluation of conodonts from the lower Guilmette Formation and Alamo Breccia Member, together with regional sedimentologic and conodont biofacies comparisons, now firmly locates the onset of the Johnson et al. (1985) transgressive–regressive (T–R) cycle IIc, which occurred after the start of the punctata Zone, within a parautochthonous megablock low in the Alamo Breccia. Whole-rock carbon isotope analyses through the lower Guilmette Formation and Alamo Breccia Member reveal two positive δ 13 C carb excursions: (1) a small, 3‰ excursion, which is possibly correlative with the falsiovalis Event previously identified from sections in Western Europe and Australia, occurs below the breccia in the Upper falsiovalis Zone to early part of the transitans Zone; and (2) a large, multi-part excursion, dominated by a 6‰ positive shift, begins above the start of the punctata Zone and onset of T–R cycle IIc and continues above the Alamo Breccia, ending near the punctata – hassi zonal boundary. This large excursion correlates with the punctata Event, a major positive δ 13 C excursion previously recognized in eastern Laurussia and northern Gondwana. Consistent with previous studies, at Hancock Summit West the punctata Event is apparently not associated with any regional extinctions or ecosystem reorganizations. In the study area, onset of the main punctata Event began after the start of both the punctata Zone and T–R cycle IIc, and preceded the Alamo impact by less than 650 k.y., as inferred from conodont biochronologic and regional rock-accumulation rate estimates. Although complicated by the heterolithic, high-energy deposits of the Alamo Breccia, the carbon isotope record of the breccia and post-breccia beds does not indicate a major impact-correlative perturbation to the carbon cycle. This study extends recognition of the punctata Event to western Laurussia, further reinforcing the potential global scale of the event and its potential importance to understanding early to middle Frasnian marine geochemistry and palaeoenvironments. Based on previous models and our observations, increased tectonic activity, increased nutrient flux to oceans, increased marine bioproductivity, widespread anoxia, and increased organic carbon burial were all likely key factors in driving the punctata Event excursion. Furthermore, periodic eustatic and regional relative sea-level rises may have played an important role in promoting organic carbon burial and in maintaining a link between the primary open-marine geochemical signal and that recorded on the shallow-marine, lower Guilmette carbonate platform.

Nevada↗
USGS1987

Sediment-yield history of a small basin in southern Utah, 1937–1976: Implications for land management and geomorphology

Alluvium deposited in a reservoir from 1937 to 1976 records the sediment-yield history of a small (2.8 km 2 ), high-relief basin in semiarid southern Utah. Stratification in the alluvium shows that sediment was deposited in the reservoir only 21 times in 38 yr, a runoff recurrence interval of 1.8 yr. Thus, on average, the particular combination of rainfall intensity, duration, and antecedent moisture conditions producing runoff did not recur often. On the basis of the volume of beds in the reservoir fill, sediment yield of individual runoff events averaged 2500 m 3 /km 2 (5.3 a-ft/mi 2 ) with slightly less than one order of magnitude variation. This low variation is not expected of small basins and probably resulted from limited hillslope sediment supply, suggesting that transport processes were more rapid than weathering processes. Sediment yield, therefore, was evidently controlled by the availability of freshly weathered material.

Arizona, Utah↗
USGS2002

Using tsunami deposits to improve assessment of tsunami risk

In many places in the world the written record of tsunamis is too short to accurately assess the risk of tsunamis. Sedimentary deposits left by tsunamis can be used to extend the record of tsunamis to improve risk assessment. The two primary factors in tsunami risk, tsunami frequency and magnitude, can be addressed through field and modeling studies of tsunami deposits. Recent advances in identification of tsunami deposits and in tsunami sedimentation modeling increase the utility of using tsunami deposits to improve assessment of tsunami risk.

Conference Paper↗
USGS2023

Critical minerals in subduction-related magmatic-hydrothermal systems of the United States

During the World War and Cold War eras (1910s–1990s), domestic consumption of numerous mineral commodities relied increasingly on imported supplies. Consumption reliance has since expanded to include 50 “critical minerals” (elements and mineral commodities) that are mostly to entirely imported and subject to curtailment by suppliers or supply chain disruption. New domestic supplies of critical minerals are being pursued by mining companies and by several federal departments and agencies. Information on domestic deposits and resources of critical minerals is being compiled by the U.S. Geological Survey Mineral Resources Program, which has organized investigations by mineral system, deposit type, and commodity. Production, reserves, resources, and inventories of 21 critical minerals in domestic magmatic-hydrothermal deposits related to subduction-generated magmatism, and in tailings, slag, slimes, and electrolyte from copper concentrators, smelters, and refineries that processed some deposits, are largely restricted to Western States and Alaska. The critical mineral commodities Al, Sb, As, Bi, Co, fluorite, Ga, Ge, In, Mn, Ni, Nb, Pd, Pt, potash, Re, Ta, Te, Sn, W, and V are variably concentrated in porphyry/skarn copper-(molybdenum), skarn-replacement-vein (S-R-V) tungsten, polymetallic sulfide S-R-V intermediate sulfidation (IS), high-sulfidation gold-silver, low-sulfidation gold-silver, and lithocap alunite deposit types. These deposit types occur in porphyry copper-molybdenum-gold, alkalic porphyry, porphyry tin (granite related), and reduced intrusion-related mineral systems. Production, reserves, and resources of Co, Ni, Nb, Pd, Pt, Ta, Sn, and V in subduction-related deposits in Western States are insignificant to small, mostly equivalent to months to a few years of recent annual domestic consumption (2016–2020). Significant inventories, equivalent to 2 or more years of consumption of aluminum, antimony, potash, and tungsten in unmined S-R-V tungsten, polymetallic sulfide S-R-V-IS, and lithocap alunite deposits vary from approximately 2 to 8 years. Several decades of consumption of arsenic, bismuth, fluorite, gallium, germanium, and indium exist in some polymetallic sulfide S-R-V-IS and lithocap alunite deposit types. Based on concentrations of critical minerals in reserves, resources, drill holes, and deposit domains (ore types), and in captive refinery records, the largest domestic inventories of Sb, As, Bi, Re, and Te, and possibly Ga, Ge, In, Sn, and W, are in porphyry copper-molybdenum (Cu-Mo) deposits in Alaska, Idaho, Utah, and Arizona, and in interim products of processing porphyry Cu-Mo deposit ores for recovery of copper and molybdenum. Concentrations of critical minerals in archival specimens and sample collections, although somewhat biased by collection and conservation decisions and categorization, are broadly proportionate to those in reserves, resources, and drill holes. These concentrations imply significant inventories of some critical minerals in deposits for which production, resources, and refinery records are unavailable or incomplete. Because of the large masses of ores mined and processed annually (hundreds of millions of metric tons) and in reserves and resources (hundreds of millions of metric tons to billions of metric tons), calculated inventories of critical minerals in porphyry Cu-Mo deposits are equivalent to decades and centuries of recent consumption. However, these inventories should not be considered consumable supplies without reserve definition and development of economically viable mining plans and recovery techniques. An expeditious strategy for elimination or reduction of import reliance is recovery, and improved recovery efficiency, of Sb, As, Bi, Re, and Te, and possibly Ga, Ge, In, Ni, Sn, Ti, and W; during concentration and refining of copper and molybdenum minerals in ores of operating porphyry Cu-Mo mines; and in unmined porphyry Cu-Mo resources. These chalcophile, siderophile, and lithophile critical minerals, often undetectable in ore, are concentrated (hundreds of parts per million to percents) in slimes and electrolyte during copper electrorefining or could be recovered, in part, during sulfide concentration and smelting. Other than rhenium (recovered during molybdenum refining) and tellurium, all have been routinely discarded. Subsidization (for example, commodity price guarantees, tax credits, recovery technology development), political initiative, and (or) sustained market favorability could support new production of critical mineral commodities from subduction-related magmatic-hydrothermal deposits in Western States. In addition, insufficient domestic refining capacity could relegate the large inventories of critical minerals in porphyry Cu-Mo reserves and resources (for example, Pebble, Alaska; Resolution and Copper World [Rosemont], Arizona) to exportation in concentrates and importation insecurity, fortifying their present status.

Scientific Investigations Report↗
USGS1989

Snow and ice perturbation during historical volcanic eruptions and the formation of lahars and floods

Historical eruptions have produced lahars and floods by perturbing snow and ice at more than 40 volcanoes worldwide. Most of these volcanoes are located at latitudes higher than 35°; those at lower latitudes reach altitudes generally above 4000 m. Volcanic events can perturb mantles of snow and ice in at least five ways: (1) scouring and melting by flowing pyroclastic debris or blasts of hot gases and pyroclastic debris, (2) surficial melting by lava flows, (3) basal melting of glacial ice or snow by subglacial eruptions or geothermal activity, (4) ejection of water by eruptions through a crater lake, and (5) deposition of tephra fall. Historical records of volcanic eruptions at snow-clad volcanoes show the following: (1) Flowing pyroclastic debris (pyroclastic flows and surges) and blasts of hot gases and pyroclastic debris are the most common volcanic events that generate lahars and floods; (2) Surficial lava flows generally cannot melt snow and ice rapidly enough to form large lahars or floods; (3) Heating the base of a glacier or snowpack by subglacial eruptions or by geothermal activity can induce basal melting that may result in ponding of water and lead to sudden outpourings of water or sediment-rich debris flows; (4) Tephra falls usually alter ablation rates of snow and ice but generally produce little meltwater that results in the formation of lahars and floods; (5) Lahars and floods generated by flowing pyroclastic debris, blasts of hot gases and pyroclastic debris, or basal melting of snow and ice commonly have volumes that exceed 10 5 m 3 . The glowing lava (pyroclastic flow) which flowed with force over ravines and ridges...gathered in the basin quickly and then forced downwards. As a result, tremendously wide and deep pathways in the ice and snow were made and produced great streams of water (Wolf 1878).

Bulletin of Volcanology↗
USGS1984

Neogene stratigraphy of the submerged U.S. Atlantic margin

Thirty boreholes and several hundred sea-floor samples provide a detailed but incomplete record of Neogene strata and depositional environments along the submerged part of the United States Atlantic margin. Three major sedimentary basins, the Blake Plateau Basin, the Baltimore Canyon Trough, and the Georges Bank Basin, contain Neogene sedimentary prisms as thick as 1200 m, comprising bathyal marine to nonmarine strata. Middle Miocene rocks compose the most widely represented and thickest unit (> 600 m in the Baltimore Canyon Trough). Calcareous microfossils provide excellent biostratigraphic and paleoenvironmental indicators except in some sparsely fossilferous shallow-water intervals and where shallow-water diatomaceous assemblages predominate. However, in outer sublittoral assemblages of the Blake Plateau Basin and Baltimore Canyon Trough, the co-occurrence of abundant diatoms, radiolarians, and planktic foraminifera provide an excellent opportunity for intercalibration of biozones. Preliminary correlations between chronostratigraphic and paleoenvironmental interpretations indicate a close association of depositional sequences with sea-level fluctuations, but some local exception persist.

U.S. Atlantic margin↗
USGS2004

Bioturbation depths, rates and processes in Massachusetts Bay sediments inferred from modeling of 210Pb and 239 + 240Pu profiles

Profiles of 210 Pb and 239 + <240 Pu from sediment cores collected throughout Massachusetts Bay (water depths of 36-192 m) are interpreted with the aid of a numerical sediment-mixing model to infer bioturbation depths, rates and processes. The nuclide data suggest extensive bioturbation to depths of 25-35 cm. Roughly half the cores have 210 Pb and 239 + 240 Pu profiles that decrease monotonically from the surface and are consistent with biodiffusive mixing. Bioturbation rates are reasonably well constrained by these profiles and vary from ~0.7 to ~40 cm 2 yr -1 . As a result of this extensive reworking, however, sediment ages cannot be accurately determined from these radionuclides and only upper limits on sedimentation rates (of ~0.3 cm yr -1 ) can be inferred. The other half of the radionuclide profiles are characterized by subsurface maxima in each nuclide, which cannot be reproduced by biodiffusive mixing models. A numerical model is used to demonstrate that mixing caused by organisms that feed at the sediment surface and defecate below the surface can cause the subsurface maxima, as suggested by previous work. The deep penetration depths of excess 210 Pb and 239 + 240 Pu suggest either that the organisms release material over a range of >15 cm depth or that biodiffusive mixing mediated by other organisms is occurring at depth. Additional constraints from surficial sediment 234 Th data suggest that in this half of the cores, the vast majority of the present-day flux of recent, nuclide-bearing material to these core sites is transported over a timescale of a month or more to a depth of a few centimeters below the sediment surface. As a consequence of the complex mixing processes, surface sediments include material spanning a range of ages and will not accurately record recent changes in contaminant deposition.

Massachusetts↗
USGS2012

Effects of hydrothermal alteration on the magnetization of the Oligocene Carpenter Ridge Tuff, Bachelor Caldera, San Juan Mountains, Colorado

Intracaldera Oligocene Carpenter Ridge Tuff fills the Bachelor caldera in the central San Juan caldera complex and hosts mineral deposits of the Creede mineral district. The Carpenter Ridge Tuff and unaltered portions of its intracaldera Bachelor Mountain Member, have strong, high‐coercivity, reverse magnetizations with average magnetic susceptibility (MS) and natural remanent magnetization (NRM) of 6 × 10 −3 volume SI and 8 A/m, respectively. Oxide phenocrysts in these rocks are titanomagnetite and ilmenite; however, magnetization appears to be controlled by microcrystic titanomaghemite based on thermal demagnetization unblocking temperatures and Curie temperatures between 580°C and 620°C. Much of the intracaldera tuff was affected by potassic metasomatism, a type of hydrothermal alteration characterized by addition of K and loss of Ca and Na, between 27.3 Ma and 25.1 Ma. Potassic metasomatism resulted in the replacement of original feldspars by potassium feldspar and quartz, oxidation of the original oxide phenocrysts to hematite and rutile, and consequent suppression of MS and NRM by a factor of 5. Also present, however, are metasomatized rocks that have high magnetizations even though their original oxide phenocrysts were destroyed; values of MS and NRM are similar to those of outflow tuff. Such rocks are suspected of containing secondary magnetite on the basis of (1) Curie and thermal unblocking temperatures at and below 580°C, indicating that magnetization is carried by magnetite but that primary microcrysts of maghemite were destroyed, and (2) observation in one sample of magnetite rimming cores of hematite+rutile. The presence of secondary magnetite in metasomatized rocks requires a local shift to more reducing fluid chemistry, although we are unable to determine whether this shift occurred during potassic metasomatism or during later alteration or ore deposition. These altered rocks may record a change from a pervasive alteration by alkaline, oxidizing fluids to a vein‐controlled alteration dominated by more reduced fluids in which magnetite was stable.

Colorado↗
USGS2007

Pleistocene Brawley and Ocotillo Formations: Evidence for initial strike-slip deformation along the San Felipe and San Jacinto fault zonez, Southern California

We examine the Pleistocene tectonic reorganization of the Pacific-North American plate boundary in the Salton Trough of southern California with an integrated approach that includes basin analysis, magnetostratigraphy, and geologic mapping of upper Pliocene to Pleistocene sedimentary rocks in the San Felipe Hills. These deposits preserve the earliest sedimentary record of movement on the San Felipe and San Jacinto fault zones that replaced and deactivated the late Cenozoic West Salton detachment fault. Sandstone and mudstone of the Brawley Formation accumulated between ???1.1 and ???0.6-0.5 Ma in a delta on the margin of an arid Pleistocene lake, which received sediment from alluvial fans of the Ocotillo Formation to the west-southwest. Our analysis indicates that the Ocotillo and Brawley formations prograded abruptly to the east-northeast across a former mud-dominated perennial lake (Borrego Formation) at ???1.1 Ma in response to initiation of the dextral-oblique San Felipe fault zone. The ???25-km-long San Felipe anticline initiated at about the same time and produced an intrabasinal basement-cored high within the San Felipe-Borrego basin that is recorded by progressive unconformities on its north and south limbs. A disconformity at the base of the Brawley Formation in the eastern San Felipe Hills probably records initiation and early blind slip at the southeast tip of the Clark strand of the San Jacinto fault zone. Our data are consistent with abrupt and nearly synchronous inception of the San Jacinto and San Felipe fault zones southwest of the southern San Andreas fault in the early Pleistocene during a pronounced southwestward broadening of the San Andreas fault zone. The current contractional geometry of the San Jacinto fault zone developed after ???0.5-0.6 Ma during a second, less significant change in structural style. ?? 2007 by The University of Chicago. All rights reserved.

Journal of Geology↗
USGS2018

Influence of extreme and annual floods on point-bar sedimentation: Inferences from Powder River, Montana, USA

Effects of discharge variability on point-bar sedimentation are not well documented, although resulting changes in flow patterns are well known. This paper focuses on a meander of Powder River in Montana (USA). In May 1978, Powder River had a 50-year recurrence flood, which caused outer bank retreat of ∼70 m. This bank continued to retreat over ∼40 m in response to annual floods between 1979 and 2016. A trench, up to 2 m deep and 60 m long, was excavated in 2016 through the axial point-bar deposits accumulated during and since the 1978 flood. Deposits from the extreme 1978 flood consisted of stratified, coarsening-upward pebbles with subordinate sand, and show paleoflow toward the outer bank. Deposits accreted during subsequent annual floods consist of fining-upward, medium to fine sand with subordinate mud and gravel. These deposits contain sedimentary structures indicating transport from the channel up the bar. Field observations indicate that during extreme floods, the axial part of the bar was armored by coarsening-upward gravels and not affected by secondary helical circulation. In contrast, during annual floods, armoring was not observed and most of the flow was directed up the sloping point-bar surface, indicating secondary circulation near the bend apex. This paper shows that the area affected by the secondary helical circulation shifts downstream and upstream of the bend apex during extreme and annual floods, respectively. This causes significant changes in grain size and sedimentary facies distribution in point-bar deposits, which should be considered when analyzing meandering-river deposits in the ancient sedimentary record.

Montana↗
USGS2003

Quaternary sedimentation and subsidence history of Lake Baikal, Siberia, based on seismic stratigraphy and coring

The long, continuous, high-latitude, stratigraphic record of Lake Baikal was deposited in three broad sedimentary environments, defined by high-resolution seismic-reflection and coring methods: (1) turbidite depositional systems, by far the most widespread, characterizing most of the margins and floors of the main basins of the lake, (2) large deltas of major drainages, and (3) tectonically or topographically isolated ridges and banks. Holocene sedimentation rates based on radiocarbon ages vary by more than an order of magnitude among these environments, from less than about 0.03 mm/yr on ridges and banks to more than about 0.3 mm/yr on basin floors. Extrapolating these rates, with a correction for compaction, yields tentative estimates of about 25 and 11 Ma for the inception of rifting in the Central and North basins, respectively, and less than 6 Ma for the 200-m sediment depth on Academician Ridge. The Selenga Delta has the distinctive form of a classic prograding Gilbert-type delta, but its history appears to represent a complex combination of tectonism and sedimentation. The central part of the delta is underlain by prograding, shallow-water sequences, now several hundred meters below the lake surface. These deposits and much of the delta slope are mantled by fine-grained, deep-water, hemipelagic deposits whose base is estimated to be about 650,000 years old. Modern coarse-grained sediment bypasses the delta slope through fault-controlled canyons that feed large, subaqueous fans at the ends of the South and Central basins. These relations, along with abundant other evidence of recent faulting and the great depths of the Central and South basins, suggest that these two rift basins have experienced a period of unusually rapid subsidence over the last 650,000 years, during at least part of which sedimentation has failed to keep pace.

Lake Baikal↗
USGS1987

Diatoms and tonsteins as paleoenvironmental and paleodepositional indicators in a Miocene coal bed, Costa Rica.

The Venado Formation is composed of more than 300 m of mudstone, siltstone, sandstone, limestone, volcaniclastics, and coal beds. The coal beds are of unknown lateral extent and mainly occur in the middle part of the formation. Diatoms are a useful microscopic tool for identifying the depositional environments. They indicate that swamp environments were intermixed with lacustrine environments during the formation of the peat deposit or that the coal records environmental changes through time. -from Authors

Palaios↗
USGS2019

Real-time monitoring of debris-flow velocity and mass deformation from field experiments with high sample rate lidar and video

Debris flows evolve in both time and space in complex ways, commonly starting as coherent failures but then quickly developing structures such as roll waves and surges. This process is readily observed, but difficult to study or quantify because of the speed at which it occurs. Many methods for studying debris flows consist of point measurements (e.g., of flow height or basal stresses), which are inherently limited in spatial coverage and fail to fully capture the spatiotemporal evolution of a flow. In this study, we use a terrestrial lidar to measure debris-flow profiles at high sample rates to examine debris-flow movement with high temporal and spatial precision and accuracy. We acquired measurements during gate-release experiments at the USGS debris flume, a unique experimental facility where debris flows can be simulated at a large scale. In this study, the laser scanner was placed at the bottom of the steep flume and recorded topography of the entire flume bed and debris flow at a rate of 60 Hz along a very narrow profile (~1mm in width), providing a detailed, two-dimensional cross-section of the debris flow through time. The high-resolution profiles enable us to quantify flow front and surge velocities of the debris flow and provide an unprecedented record of the development and evolution of the flow structure over time. The profiles also preserve a record of the highly variable deposition pattern of the debris flow on a downstream fan with a time resolution of hundredths of a second. In addition, video imagery from the experiment was used to track debris flow movement through time. By acquiring high-resolution topographic data and video imagery during a controlled experiment, we have been able to obtain unusually complete quantitative measurements of debris-flow movement. Such measurements may help constrain future modeling efforts.

Conference Paper↗
USGS1990

International strategic minerals inventory summary report; tin

The International Strategic Minerals Inventory tin inventory contains records for 56 major tin deposits and districts in 21 countries. These countries accounted for 98 percent of the 10 million metric tons of tin produced in the period 1934-87. Tin is a good alloying metal and is generally nontoxic, and its chief uses are as tinplate for tin cans and as solder in electronics. The 56 locations consist of 39 lode deposits and 17 placers and contain almost 7.5 million metric tons of tin in identified economic resources (R1E) and another 1.5 million metric tons of tin in other resource categories. Most of these resources are in major deposits that have been known for over a hundred years. Lode deposits account for 44 percent of the R1E and 87 percent of the resources in other categories. Placer deposits make up the remainder. Low-income and middle-income countries, including Bolivia and Brazil and countries along the Southeast Asian Tin Belt such as Malaysia, Thailand, and Indonesia account for 91 percent of the R1E resources of tin and for 61 percent of resources in other categories. The United States has less than 0.05 percent of the world's tin R1E in major deposits. Available data suggest that the Soviet Union may have about 4 percent of resources in this category. The industrial market economy countries of the United States, Japan, Federal Republic of Germany, and the United Kingdom are major consumers of tin, whereas the major tin-producing countries generally consume little tin. The Soviet Union and China are both major producers and consumers of tin. At the end of World War II, the four largest tin-producing countries (Bolivia, the Belgian Congo (Zaire), Nigeria, and Malaysia) produced over 80 percent of the world's tin. In 1986, the portion of production from the four largest producers (Malaysia, Brazil, Soviet Union, Indonesia) declined to about 55 percent, while the price of tin rose from about $1,500 to $18,000 per metric ton. In response to tin shortages during World War II, the United States began stockpiling refined tin metal from approximately 1946 to 1953 to ensure a strategic supply in the event of another war. Since World War II, there have been six International Tin Agreements to maintain price and supply stability between tin producers and consumers. Artificially high prices set by the tin-producing members and a tin glut brought on by independent producers like Brazil caused the collapse of the world tin market in late 1985; the International Tin Council exhausted its credit to support the market price. By the year 2025, Bolivia's underground lode mines will likely have insignificant production, as will those in the United Kingdom. Tin mines in the Southeast Asian Tin Belt will still be active. Brazil, which has risen from the eighth-ranked tin-producing country in 1982 to the largest producer in 1988, will likely be a major influence on world tin production well into the 21st century. The future mining activity of deposits presently inactive in Australia is impossible to predict.

Circular↗
USGS2021

A 40-year story of river sediment at Mount St. Helens

The 1980 eruption of Mount St. Helens in Washington State unleashed one of the largest debris avalanches (landslide) in recorded history. The debris avalanche deposited 3.3 billion cubic yards of material into the upper North Fork Toutle River watershed and obstructed the Columbia River shipping channel downstream. From the eruption on May 18, 1980, to September 30, 2018, the Toutle River transported a total of about 405 million tons of sediment into the lower Cowlitz River—enough to bury downtown Portland, Oregon, to a depth of 300 feet. Excluding the massive sediment load from the eruption itself, from October 1, 1980, to September 30, 2018, the Toutle River transported more than 248 million tons of sediment, or an average of 6.5 million tons per year. Increased flood risk to downstream communities is managed by a sediment retention structure, grade building structures, berms, levees, and dredging. Near-real-time monitoring of streamflow and sediment yield is important for effective management of these dynamic mitigation efforts. Since the sediment retention structure began trapping sediment in November 1987, the Toutle River has transported on average 2.8 million tons of sediment per year into the lower Cowlitz River. This is still 10 times greater than pre-eruption levels, with higher sediment transport potentially approaching 50 to 100 times greater during storms. Despite the eruption lasting only a few hours, the socioeconomic effects and mitigation measures for the region continue into the 21st century.

Washington↗
USGS1998

Catalog of the historically active volcanoes of Alaska

Alaska hosts within its borders over 80 major volcanic centers that have erupted during Holocene time (< 10,000 years). At least 29 of these volcanic centers (table 1) had historical eruptions and 12 additional volcanic centers may have had historical eruptions. Historical in Alaska generally means the period since 1760 when explorers, travelers, and inhabitants kept written records. These 41 volcanic centers have been the source for >265 eruptions reported from Alaska volcanoes. With the exception of Wrangell volcano, all the centers are in, or near, the Aleutian volcanic arc, which extends 2500 km from Hayes volcano 145 km west of Anchorage in the Alaska-Aleutian Range to Buldir Island in the western Aleutian Islands (fig. 1). The volcanic arc, a subduction-related feature associated with underthrusting of the Pacific plate beneath the North American plate is divided between oceanic island arc and continental margin segments, the boundary occurring at about 165° W longitude (fig. 1). An additional 7 volcanic centers in the Aleutian arc (table 2; fig. 1 A) have active fumarole fields but no reported historical eruptions. This report discusses the location, physiography and structure, eruptive history, and geology of those volcanoes in Alaska that have experienced one or more eruptions that have been recorded in the written history (i.e., in historical time). It is part of the group of catalogs entitled Catalogue of Active Volcanoes of the World published beginning in 1951 under the auspices of the International Association of Volcanology and Chemistry of the Earth's Interior (IAVCEI). A knowledge of the information contained in such catalogs aids in understanding the type and scale of activity that might be expected during a particular eruption, the hazards the eruption may pose, and even the prediction of eruptions. The catalog will thus be of value not only to the inhabitants of Alaska but to government agencies concerned with emergency response, air traffic operations, and weather, as well as to industry and scientists. The combination of the hazard posed by volcanic ash to jet aircraft and the heavy use of international air routes located parallel to, and on either side of, the Aleutian volcanic arc means that even remote volcanoes in Alaska now pose significant hazards to life and property. Although this report is concerned with historical eruptions from Alaskan volcanoes, other volcanoes in Alaska have erupted in the past 10,000 years and might therefore be expected to erupt again. Several Holocene volcanic centers in the Aleutian arc have no reported historical activity. Elsewhere in Alaska the Bering Sea basalt fields cover large areas of the Yukon Delta, Seward Peninsula, and several of the islands of the Bering Sea. Holocene centers also occur in the Wrangell Mountains and in isolated occurrences in the interior and southeastern Alaska. Eruptions from these centers have occurred within the past several hundred years but none were transcribed in the written record. Moodie and others (1992), however, report oral traditions among the Northern Athapaskan Indians of the southwestern Yukon Territory that may record the second and younger deposition of the White River Ash circa A.D. 720. This lobe of the White River Ash was deposited during the paroxysmal eruption of Churchill volcano in the Wrangell Mountains of eastcentral Alaska (McGimsey and others, 1992; Richter and others, 1995).

Alaska↗