Search USGS⌕ Search

SEARCH · Search USGS

Results for “Quaternary Research”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17Linked to original sources

High-resolution chirp seismic reflection data acquired from the Cap de Creus shelf and canyon area, Gulf of Lions, Spain in 2004

Seismic reflection data were collected from the Cap de Creus shelf and canyon in the southwest portion of the Gulf of Lions in October 2004. The data were acquired using the U.S. Geological Survey`s (USGS) high-resolution Edgetech CHIRP 512i seismic reflection system aboard the R/V Oceanus. Data from the shipboard 3.5 kHz echosounder were also collected but are not presented here. The seismic reflection data were collected as part of EuroSTRATAFORM funded by the Office of Naval Research. In October 2004, more than 200 km of high resolution seismic reflection data were collected in water depths ranging 30 m - 600 m. All data were recorded with a Delph Seismic PC-based digital recording system and processed with Delph Seismic software. Processed sections were georeferenced into tiff images for digital archive, processing and display. Penetration ranged 20-80 m. The data feature high quality vertical cross-section imagery of numerous sequences of Quaternary seismic stratigraphy. The report includes trackline maps showing the location of the data, as well as both digital data files (SEG-Y) and images of all of the profiles. The data are of high quality and provide new information on the location and thickness of sediment deposits overlying a major erosion surface on the Cap de Creus shelf; they also provide new insight into sediment processes on the walls and in the channel of Cap de Creus Canyon. These data are under study by researchers at the US Geological Survey, the University of Barcelona, and Texas A and M University. Copies of the data are available to all researchers.

Open-File Report↗

Dating Quaternary faults in the southwestern United States by using buried calcic paleosols

Calcareous soils are widespread on upper Pliocene to upper Pleistocene unconsolidated surflcial deposits in semiarid portions of the southwestern United States. Where these soils are related to faults, the soils may provide a means for quantitatively estimating timing and amounts of Quaternary faulting. Soil age estimates are based on the amount of pedogenic CaCO 3 (g/cm 2 -soil column) that has accumulated from soil processes, whereas rates of calcic-soil formation were calibrated by the K-Ar dating method, tephrochronology, vertebrate paleontology, and regional soil studies. The County Dump fault, west of Albuquerque, N. Mex. cuts a 500 000-yearold datum, the Llano de Albuquerque. The downdropped block of this fault contains a sequence of faulted younger deposits and intercalated calcic paleosols. Soil ages, and hence fault ages, can be calculated by measuring the total pedogenic calcium carbonate content in a section of buried paleosols and by using an independently established maximum soil formation rate of 0.35 g CaCO 3 • cm -2 • 10 -3 yr -1 for the Albuquerque area. This particular fault segment has had four discrete episodes of movement in the past 500 000 yr, the most recent of which occurred about 20000 yr B.P. Recurrence intervals on the segment are 90 000-190 000 yr, but the composite recurrence interval for all fault movements in this area may be less by several orders of magnitude. This technique of quantifying soil properties and calculating ages of relict soils can be used to estimate ages of Quaternary deposits and associated surfaces, to correlate such features over broad regions, and to analyze regional trends in calcic-soil formation.

New Mexico↗

Young (<7 Ma) gold deposits and active geothermal systems of the Great Basin: Enigmas, questions, and exploration potential

Young gold systems in the Great Basin (£ 7 Ma), though not as well studied as their older counterparts, comprise a rapidly growing and in some ways controversial group. The gold inventory for these systems has more than doubled in the last 5 years from roughly 370 tonnes (12 Moz) to 890 tonnes (29 Moz). Although these deposits are characterized by low grades, tonnages can be high and stripping ratios low, and they have been mined profitably, as exemplified by Florida Canyon and Hycroft. Active geothermal systems in the Great Basin also comprise a rapidly growing group, as evidenced by a number of recent discoveries of geothermal groundwater and a more than 50% increase in electricity production capacity from these systems in the last 5 years. Many young gold deposits are closely associated with active geothermal systems, suggesting that gold deposits may be forming today in the Great Basin. Measured or estimated geothermal reservoir temperatures commonly approach or exceed 200∞C, and other characteristics and processes (advanced argillic caps, hydrothermal eruption breccias) of these young deposits resemble those of nearby Tertiary precious metal deposits. Nonetheless, many young gold systems, especially in Nevada, are not associated with coeval igneous rocks. Similarly, almost all electricity-grade geothermal systems in Nevada are not associated with Quaternary silicic volcanic rocks, and have lower temperature gradients, lower 3He/4He ratios, and lower dissolved trace element concentrations than most magmatic-heated geothermal systems elsewhere in the world. The increasing economic significance of young gold deposits and active geothermal systems justifies more research to better understand their origins, particularly because in some aspects they remain enigmatic and controversial. Are young gold deposits in Nevada truly amagmatic, or have they received metal and fluid contributions from magmas deeper within the crust? Has gold in these deposits been remobilized from older gold mineralization? Current research is investigating these and other questions to improve our genetic understanding of these young gold systems, which in turn can lead to improved exploration targeting. The recent rapid growth in resources for both young gold deposits and geothermal systems underscores their underdeveloped exploration potential. Even though many young gold deposits exhibit relatively shallow hot-springs-style mineralization, their young age may preclude exposure by erosion. Uplift along active normal faults has exposed some deposits (e.g., Florida Canyon, Dixie Comstock, Wind Mountain), but in other areas, such as the Walker Lane, where strike-slip faulting is prevalent, the opportunities for exposure can be limited. Many active geothermal systems are also concealed below the surface in that hot springs or steam vents may be absent above areas of thermal groundwater. With sources of energy to support mine production becoming more problematic, the potential advantages of simultaneously exploring for young gold deposits and spatially associated geothermal systems are becoming more apparent. Exploration methods recently proven effective in geothermal exploration that can be adapted to gold exploration include temperature surveys, hyperspectral remote sensing, geophysical surveys, water analyses, and detailed mapping of geothermal-related features and related fault systems.

Conference Paper↗

The compositionally zoned eruption of 1912 in the Valley of Ten Thousand Smokes, Katmai National Park, Alaska

On June 6–8, 1912, ∼ 15 km 3 of magma erupted from the Novarupta caldera at the head of the Valley of Ten Thousand Smokes (VTTS), producing ∼ 20 km 3 of air-fall tephra and 11–15 km 3 of ash-flow tuff within ∼ 60 hours. Three discrete periods of ash-fall at Kodiak correlate, respectively, with Plinian tephra layers designated A, CD, and FG by Curtis (1968) in the VTTS. The ash-flow sequence overlapped with but outlasted pumice fall A, terminating within 20 hours of the initial outbreak and prior to pumice fall C. Layers E and H consist mostly of vitric dust that settled during lulls, and Layer B is the feather edge of the ash flow. The fall units filled and obscured the caldera, but arcuate and radial fissures outline a 6-km 2 depression. The Novarupta lava dome and its ejecta ring were emplaced later within the depression. At Mt. Katmai, 10 km east of the 1912 vent, a 600-m-deep caldera of similar area also collapsed at about this time, probably owing to hydraulic connection with the venting magma system; but all known ejecta are thought to have erupted at Novarupta. Mingling of three distinctive magmas during the eruption produced an abundance of banded pumice, and mechanical mixing of chilled ejecta resulted in deposits with a wide range of bulk composition. Pumice in the initial fall unit (A) is 100% rhyolite, but fall units atop the ash flow are > 98% dacite; black andesitic scoria is common only in the ash flows and in near-vent air-fall tephra. Pumice counts show the first half of the ash-flow deposit to be 91–98% rhyolite, but progressive increases of dacite and andesite eventually reduced the rhyolitic component to < 2%. The later, rhyolite-poor flows were hotter, less mobile, and widely produced partially welded tuff and vapor-indurated sillar. The main ash flow was too deflated and sluggish 16 km from the vent to surmount a 25-m-high moraine in its path but was diverted around it and continued 5 km down-valley, engulfing and charring trees but not toppling all of them. Thin ash-flow veneers feather 30–40 m up the enclosing valley walls but only where a constriction in the central VTTS locally raised the flow level. In the upper VTTS, the “high sand mark” is not a veneer but a marginal bench formed in thick tuff by differential compaction. Flooding from adjacent glaciers led to phreatic explosions that ejected blocks of tuff more welded than any yet exposed. A cluster of phreatic craters dammed a lake atop the tuff, the breaching of which caused a flood that scoured the ash-flow surface in the central VTTS, transported 50-cm blocks of welded tuff > 20 km to the lowermost VTTS, and deposited 1–8 m of debris there. Rhyolitic ejecta contain only 1–2% phenocrysts but andesite and dacite have 30–45%. Quartz is present and augite absent only in the rhyolite, but all ejecta contain plagioclase, orthopyroxene, titanomagnetite, ilmenite, apatite, and pyrrhotite; rare olivine occurs in the andesite. The zoning ranges of phenocrysts in the rhyolitic and intermediate ejecta do not overlap. New chemical data show the bulk SiO 2 range to be: rhyolite 77 ± 0.6, dacite 66-64.5, and andesite 61.5–58.5%. The dacitic and andesitic ejecta contrast in color and density, and it is not certain whether they form a compositional continuum. Analyses reported by Fenner within the 66–76% SiO 2 range were of banded pumice and lava and of bulk tephra that mechanically fractionated and mixed during flight. Despite the gap of 10% SiO 2 , Fe-Ti-oxide temperatures show a continuous range from rhyolite (805–850°C) through dacite (855–955°C) to andesite (955–990°C). Thermal continuity and isotopic and trace-element data suggest that all were derived from a single magmatic system, whether or not they were physically contiguous before eruption. If the rhyolitic liquid separated from dacitic magma, extraction was so efficient that no dacitic phenocrysts were retained and no bulk compositions in the range 66–76% SiO 2 were created; if it were a partial melt of roof rocks atop an intermediate magma body, then such rocks had no O- or Sr-isotopic contrast with the andesite-dacite magma and clearly did not include the Jurassic arkosic or granitic basement. The presence of Holocene domes of pre-1912 glassy dacite adjacent to the 1912 vent suggest that the 7 km 3 (or more) of high-silica rhyolitic magma (a composition rare in the Aleutian arc) was generated in less than a few thousand years. The 1912 vent is semi-encircled by several andesitic stratocones and is as close to Mageik, Trident, and Griggs volcanoes as it is to Mt. Katmai. The erupted magma probably occupied only shallow levels of an extensive system of injection and storage under a cluster of several stratovolcanoes. Although Quaternary basalt is not known to have erupted here, the intrusion of basaltic magma probably sustains the greater-VTTS magmatic system.

Alaska↗

Imaging the Seattle Fault Zone with high-resolution seismic tomography

The Seattle fault, which trends east-west through the greater Seattle metropolitan area, is a thrust fault that, around 1100 years ago, produced a major earthquake believed to have had a magnitude greater than 7. We present the first high resolution image of the shallow P wave velocity variation across the fault zone obtained by tomographic inversion of first arrivals recorded on a seismic reflection profile shot through Puget Sound adjacent to Seattle. The velocity image shows that above 500 m depth the fault zone extending beneath Seattle comprises three distinct fault splays, the northernmost of which dips to the south at around 60??. The degree of uplift of Tertiary rocks within the fault zone suggests that the slip-rate along the northernmost splay during the Quaternary is 0.5 mm a-1, which is twice the average slip-rate of the Seattle fault over the last 40 Ma.

Geophysical Research Letters↗

Eruptive history of South Sister, Oregon Cascades

South Sister is southernmost and highest of the Three Sisters, three geologically dissimilar stratovolcanoes that together form a spectacular 20km reach along the Cascade crest in Oregon. North Sister is a monotonously mafic edifice as old as middle Pleistocene, Middle Sister a basalt-andesite-dacite cone built between 48 and 14ka, and South Sister is a basalt-free edifice that alternated rhyolitic and intermediate modes from 50ka to 2ka (largely contemporaneous with Middle Sister). Detailed mapping, 330 chemical analyses, and 42 radioisotopic ages show that the oldest exposed South Sister lavas were initially rhyolitic ~50ka. By ~37ka, rhyolitic lava flows and domes (72-74% SiO 2 ) began alternating with radially emplaced dacite (63-68% SiO 2 ) and andesite (59-63% SiO 2 ) lava flows. Construction of a broad cone of silicic andesite-dacite (61-64% SiO 2 ) culminated ~30ka in a dominantly explosive sequence that began with crater-forming andesitic eruptions that left fragmental deposits at least 200m thick. This was followed at ~27ka by growth of a steeply dipping summit cone of agglutinate-dominated andesite (56-60.5% SiO 2 ) and formation of a summit crater ~800m wide. This crater was soon filled and overtopped by a thick dacite lava flow and then by >150m of dacitic pyroclastic ejecta. Small-volume dacite lavas (63-67% SiO 2 ) locally cap the pyroclastic pile. A final sheet of mafic agglutinate (54-56% SiO 2 ) - the most mafic product of South Sister - erupted from and drapes the small (300-m-wide) present-day summit crater, ending a summit-building sequence that lasted until ~22ka. A 20kyr-long-hiatus was broken by rhyolite eruptions that produced (1) the Rock Mesa coulee, tephra, and satellite domelets (73.5% SiO 2 ) and (2) the Devils Chain of ~20 domes and short coulees (72.3-72.8% SiO 2 ) from N-S vent alignments on South Sister's flanks. The compositional reversal from mafic summit agglutinate to recent rhyolites epitomizes the frequently changing compositional modes of the South Sister locus throughout its lifetime. South Sister is part of a reach of the Cascades unusually active in the last 50kyr, characterized by high vent density, N-S vent alignments, and numerous eruptive units of true rhyolite (≥ 72% SiO 2 ) that distinguishes it from much of the Quaternary Cascade arc; these are eruptive expressions of the complex confluence of arc and intraplate magmatic-tectonic regimes.

Journal of Volcanology and Geothermal Research↗

Nitrate in the ground water of Texas

Ground water in many parts of Texas contains nitrate in excess of 20 ppm (parts per million) as NO 3 . About 3,000 of the 20,000 nitrate determinations made of water from wells in Texas showed more than 20 ppm of nitrate . The public water supplies of 27 Texas towns and cities contained more than 50 ppm of nitrate . Recent medical research indicates that methemoglobinemia or infant cyanosis (“blue babies”) may be caused by nitrate in water used in formula mixtures. Most of the high nitrate in ground water is found in wells less than 200 ft deep and mainly in water from late Tertiary and Quaternary formations; however, high nitrate was found in water from all kinds of rocks of all ages. The presence of high nitrate in ground water appears to be unrelated to rainfall, geography, or cultivation. A hypothesis of bacterial origin of the high nitrate is supported by strong evidence but is weakened by the presence of the correspondingly high content of associated salts. The disappearance of nitrate at depth presents additional problems.

Texas↗

Studies of the Chesapeake Bay impact structure - Introduction and discussion

The late Eocene Chesapeake Bay impact structure on the Atlantic margin of Virginia is the largest known impact crater in the United States, and it may be the Earth's best preserved example of a large impact crater that formed on a predominantly siliciclastic continental shelf. The 85-kilometer-wide (53-milewide) crater also coincides with a region of saline ground water. It has a profound influence on ground-water quality and flow in an area of urban growth. The USGS-NASA Langley corehole at Hampton , Va., is the first in a series of new coreholes being drilled in the crater, and it is the first corehole to penetrate the entire crater-fill section and uppermost crystalline basement rock. The Langley corehole is located in the southwestern part of the crater's annular trough. A comprehensive effort to understand the crater's materials, architecture, geologic history , and formative processes, as well as its influence on ground water, includes the drilling of coreholes accompanied by high-resolution seismic-reflection and seismic-refraction surveys, audio-magnetotelluric surveys, and related multidisciplinary research. The studies of the core presented in this volume provide detailed information on the outer part of the crater, including the crystalline basement , the overlying impact -modified and impact -generated sediments (physical geology, paleontology, shocked minerals, and crystalline ejecta), and the upper Eocene to Quaternary postimpact sedimentary section (stratigraphy, paleontology, and paleoenvironments). The USGS-NASA Langley corehole has a total depth below land surface of 635.1 meters (m; 2,083.8 feet (ft)). The deepest unit in the corehole is the Neoproterozoic Langley Granite. The top of this granite at 626.3 m (2,054.7 ft) depth is overlain by 390.6 m (1,281.6 ft) of impact -modified and impact -generated siliciclastic sediments. These crater-fill materials are preserved beneath a 235.6-m-thick (773.12-ft-thick) blanket of postimpact sediments. A high-resolution seismic-reflection and seismic-refraction profile that crosses the Langley drill site is tied to the core by borehole geophysical logs, and it reveals the details of extensional collapse structures in the western annular trough. Electrical cross sections based on audio-magnetotelluric (AMT) soundings image a nearly vertical zone of high resistivity at the outer margin of the annular trough, possibly indicating fresh ground water at that location, and they show impedance trends that match the curvature of the structure . They also image the subsurface contact between conductive sediments and resistive crystalline basement , showing that the depth to crystalline basement is relatively constant in the western part of the annular trough. Chemical and isotopic data indicate that saline ground water of the Virginia inland saltwater wedge or bulge is a mixture of freshwater and seawater, and evidence for a mixing zone at the crater's outer margin supports the concept of differential flushing of residual seawater to create the bulge. Ground-water brine in the central part of the crater was produced by evaporation, and brine production from the heat of the impact is at least theoretically possible.

Chesapeake Bay↗

Moderate rates of late Quaternary slip along the northwestern margin of the Basin and Range Province, Surprise Valley fault, northeastern California

The 86-km-long Surprise Valley normal fault forms part of the active northwestern margin of the Basin and Range province in northeastern California. We use trench mapping and radiocarbon, luminescence, and tephra dating to estimate displacements and timing of the past five surface-rupturing earthquakes on the central part of the fault near Cedarville. A Bayesian OxCal analysis of timing constraints indicates earthquake times of 18.2 &plusmn; 2.6, 10.9 &plusmn; 3.2, 8.5 &plusmn; 0.5, 5.8 &plusmn; 1.5, and 1.2 &plusmn; 0.1 ka. These data yield recurrence intervals of 7.3 &plusmn; 4.1, 2.5 &plusmn; 3.2, 2.7 &plusmn; 1.6, and 4.5 &plusmn; 1.5 ka and an elapsed time of 1.2 &plusmn; 0.1 ka since the latest surface-rupturing earthquake. Our best estimate of latest Quaternary vertical slip rate is 0.6 ?? 0.1 mm/a. This late Quaternary rate is remarkably similar to long-term (8-14 Ma) minimum vertical slip rates (>0.4-0.5 &plusmn; 0.3 mm/a) calculated from recently acquired seismic reflection and chronologic and structural data in Surprise Valley and the adjacent Warner Mountains. However, our slip rate yields estimates of extension that are lower than recent campaign GPS determinations by factors of 1.5-4 unless the fault has an unusually shallow (30&deg;-35&deg;) dip as suggested by recently acquired seismic reflection data. Coseismic displacements of 2-4.5 &plusmn; 1 m documented in the trench and probable rupture lengths of 53-65 km indicate a history of latest Quaternary earthquakes of M 6.8-7.3 on the central part of the. Surprise Valley fault.

California↗

Heat flow from four new research drill holes in the Western Cascades, Oregon, U.S.A.

Conceptual models of the thermal structure of the Oregon Cascade Range propose either (1) a narrow zone of magmatic heat sources, flanked by shallow heat-flow anomalies caused by lateral ground-water flow; or (2) a wide zone of magmatic heat sources, with localized, generally negligible ground-water effects. The proposed narrow heat source coincides with the Quaternary volcanic arc, whereas the wider heat source would extend 10–30 km west of the arc. To test the models, four new heat-flow holes were sited west of the Quaternary arc but within the area of the proposed wide heat source. The sites are separated from the Quaternary arc by topographic divides and (or) major river valleys, so that heating by regional-scale ground-water flow seems unlikely. Measured heat flow (76±5 mW mm −2 ) was significantly lower than the values predicted by interpolation from an existing heat-flow contour map (95±7 mW m −2 ). The lower values are consistent with a narrow zone of magmatic heat sources. The complete heat-flow data set consists mostly of shallow (100–200 m) data and defines lobate highs around hot-spring groups in the Western Cascades. However, all of the deepest holes in the study area (44°–45°15′N) show hydrologic gradient disturbances extending to depths >200 m, so the shallow data must be extrapolated with caution.

Oregon↗

Preliminary surficial geologic map of Leuhman Ridge and the surrounding area, Edwards Air Force Base and Air Force Research Laboratory, Kern and San Bernardino Counties, California

This preliminary geologic map presents mapping of the Leuhman Ridge area of Edwards Air Force Base, California, conducted between April 2020 and June 2021. The report focuses on surficial materials and bedrock to evaluate potential faults and other geologic features that may influence groundwater movement. The preliminary work confirms that the Spring Fault, previously mapped by Dibblee (1960, 1967), is a Quaternary-active fault but does not find convincing evidence to support the existence of the Leuhman Fault (Dibblee, 1960; 1967) within the map area. Several more possible and probable faults are identified by a combination of geomorphic lineaments and brecciated rock. Pleistocene and Holocene eolian deposits are widespread, manifesting as sand sheets, dunes, and admixtures into alluvial fans. Also, an incised pediment forms much of the upland south of Leuhman Ridge. In general, field observations indicate that Quaternary alluvial and eolian deposits are thin; this suggests that secondary bedrock porosity and permeability, defined by degree of weathering and fracture density that includes fault-related fracturing, are more important factors in the location and flow patterns of groundwater.

California↗

Physiography, surficial sediments and Quaternary stratigraphy of the inner continental shelf and nearshore region of the Gulf of Maine

The western margin of the Gulf of Maine is a bedrock-framed, glaciated continental shelf that has only recently been geologically mapped. The bathymetry is divisible into four physiographic areas: nearshore basins, shelf valleys, rocky zones, and outer basins. The nearshore basins are largely floored by mud except near rock outcrops where shelly gravel occurs. Shelf valleys extend seaward from nearshore basins and estuaries and generally possess less sediment than nearshore basins. Abundant exposures of Pleistocene sediment with rippled substrates suggest that contemporary reworking is occurring. Rocky zones are the most abundant physiographic area and include both exposed bedrock and glacial gravel outcrops. Shell material produced by organisms living on or near rocks is common both in the rocky zones and in abutting environments. The outer basin begins at a depth of about 60 m and extends beyond the 100 m isobath. This area is occasionally bordered on its landward side by the late Quaternary lowstand shoreline. Below this shoreline thicker deposits of sediment exist, while all environments landward were reworked by a regression and transgression of the sea.

Gulf of Maine↗

Interplay of late Cenozoic siliciclastic supply and carbonate response on the southeast Florida platform

High-resolution seismic-reflection data collected along the length of the Caloosahatchee River in southwestern Florida have been correlated to nannofossil biostratigraphy and strontium-isotope chemostratigraphy at six continuously cored boreholes. These data are interpreted to show a major Late Miocene(?) to Early Pliocene fluvial-deltaic depositional system that prograded southward across the carbonate Florida Platform , interrupting nearly continuous carbonate deposition since early in the Cretaceous. Connection of the platform top to a continental source of siliciclastics and significant paleotopography combined to focus accumulation of an immense supply of siliciclastics on the southeastern part of the Florida Platform . The remarkably thick (> 100 m), sand-rich depositional system, which is characterized by clinoformal progradation, filled in deep accommodation, while antecedent paleotopography directed deltaic progradation southward within the middle of the present-day Florida Peninsula. The deltaic depositional system may have prograded about 200 km southward to the middle and upper Florida Keys, where Late Miocene to Pliocene siliciclastic form the foundation of the Quaternary carbonate shelf and shelf margin of the Florida Keys. These far-traveled siliciclastic deposits filled accommodation on the southeastern part of the Florida Platform so that paleobathymetry was sufficiently shallow to allow Quaternary recovery of carbonate sedimentation in the area of southern peninsular Florida and the Florida Keys.

Florida↗

The Bear River's history and diversion: Constraints, unsolved problems, and implications for the Lake Bonneville record: Chapter 2

The shifting course of the Bear River has influenced the hydrologic balance of the Bonneville basin through time, including the magnitude of Lake Bonneville. This was first recognized by G.K. Gilbert and addressed in the early work of Robert Bright, who focused on the southeastern Idaho region of Gem Valley and Oneida Narrows. In this chapter, we summarize and evaluate existing knowledge from this region, present updated and new chronostratigraphic evidence for the Bear River's drainage history, and discuss implications for the Bonneville record as well as future research needs. The Bear River in Plio-Pleistocene time joined the Snake River to the north by following the present-day Portneuf or Blackfoot drainages, with it likely joining the Portneuf River by middle Pleistocene time. An episode of volcanism in the Blackfoot-Gem Valley volcanic field, sparsely dated to ~ 100–50 ka, diverted the Bear River southward from where the Alexander shield volcano obstructed the river's path into Gem Valley. Previous chronostratigraphic and isotopic work on the Main Canyon Formation in southern Gem Valley indicates internal-basin sedimentation during the Quaternary, with a possible brief incursion of the Bear River ~ 140 ka. New evidence confirms that the Bear River's final diversion at 60–50 ka led to its integration into the Bonneville basin by spillover at a paleo-divide above present-day Oneida Narrows. This drove rapid incision before the rise of Lake Bonneville into the canyon and southern Gem Valley. Bear River diversion at 60–50 ka coincides with the end of the Cutler Dam lake cycle, at the onset of marine isotope stage 3. The Bear River subsequently contributed to the rise of Lake Bonneville, the highest pluvial lake known in the basin, culminating in the Bonneville flood. Key research questions include the prior path of the upper Bear River, dating and understanding the complex geologic relations within the Gem Valley-Blackfoot volcanic field, resolving evidence for possible earlier incursions of Bear River water into the Bonneville basin, and interpreting the sedimentology of the Main Canyon Formation.

Book chapter↗

Geologic setting of the proposed Fallon FORGE Site, Nevada: Suitability for EGS research and development

The proposed Fallon FORGE site lies within and adjacent to the Naval Air Station Fallon (NASF) directly southeast of the town of Fallon, Nevada, within the large basin of the Carson Sink in west-central Nevada. The site is located on two parcels that include land owned by the NASF and leased and owned by Ormat Nevada, Inc. The Carson Sink in the vicinity of the Fallon site is covered by Quaternary deposits, including alluvial fan, eolian, and lacustrine sediments. Four wells penetrate the entire Neogene section and bottom in Mesozoic basement. Late Miocene to Quaternary basin-fill sediments are 0.5 to >1 km thick and overlie Oligocene-Miocene volcanic and lesser sedimentary rocks. The volcanic section is 0.5 to 1.0 km thick and dominated by Miocene mafic lavas. The Neogene section rests nonconformably on heterogeneous Mesozoic basement, which consists of Triassic-Jurassic metamorphic rocks intruded by Cretaceous granitic plutons. The structural framework is dominated by a gently west-tilted half graben cut by moderately to steeply dipping N- to NNEstriking normal faults that dip both east and west. Quaternary faults have not been observed within the proposed FORGE site. Fallon was selected for a potential FORGE site due to its extensional tectonic setting, abundance of available data, existing infrastructure, and documented temperatures, permeability, and lithologic composition of potential reservoirs that fall within the ranges specified by DOE for FORGE. Since the early 1970s, more than 45 wells have been drilled for geothermal exploration within the area. Four exploration wells within the FORGE site are available for use in the project. Several additional wells are available for monitoring outside the central FORGE site within the NASF and Ormat lease area, including numerous temperature gradient holes. There is an existing, ten-station micro-seismic earthquake (MEQ) array that has been collecting data since 2001; the MEQ array can be expanded to encompass the entire Fallon project. The well data indicate that a sizeable area (~4.5 km2 ) has adequate temperatures in crystalline basement but lacks sufficient permeability within the proposed FORGE site. There are two possible, competent target formations in Mesozoic basement for stimulation in the FORGE project area: 1) Jurassic felsic metavolcanic rocks/and or metaquartzite; and 2) Cretaceous granitic intrusions. These units make up at least 3 km3 in the project area and have target temperatures of ~175-215o C. The abundant well data and detailed geophysical surveys (e.g., gravity, MT, and seismic reflection) provide significant subsurface control for the site and will permit development of a detailed 3D model. The documented temperatures, low permeability, and basement lithologies, as well as abundant available data facilitate development of a site dedicated to testing and improving new EGS technologies and techniques, thus making Fallon an ideal candidate for FORGE.

GRC Transactions↗

Discovery of an intact Quaternary paleosol, Georgia Bight, USA

A previously buried paleosol was found on the continental shelf during a study of sea floor scour, nucleated by large artificial reef structures such as vessel hulks, barges, train cars, military vehicles, etc., called “scour nuclei”. It is a relic paleo-land surface of sapling-sized tree stumps, root systems, and fossil animal bone exhumed by scour processes active adjacent to the artificial reef structure. Over the span of five research cruises to the site in 2022–2024, soil samples were taken using hand excavation, PONAR grab samplers, split spoon, hollow tube auger, and a modified Shelby-style push box. High-definition (HD) video was taken using a Remotely Operated Vehicle (ROV) and diver-held cameras. Radiocarbon dating of wood samples returned ages of 42,015–43,417 calibrated years before present (cal yrBP). Pollen studies, together with the recovered macrobotanical remains, support our interpretation of the site as a freshwater forested wetland whose keystone tree species was Taxodium distichum —bald cypress. The paleosol was identified as an Aquult, a sub-order of Ultisols where water tables are at or near the surface year-round. A deep (0.25 m+) argillic horizon comprised the bulk of the preserved soil. Comparable Ultisols found in Georgia wetlands include Typic Paleaquult (Grady and Bayboro series) soils.

Georgia↗

Volcanism, isostatic residual gravity and regional tectonic setting of the Cascade volcanic province

A technique to locate automatically boundaries between crustal blocks of disparate densities was applied to upward continued isostatic residual gravity data. The boundary analysis delineates a narrow gravitational trough that extends the length of the Pliocene and Quaternary volcanic arc from Mount Baker in northern Washington to Lassen Peak in California. Gravitational highs interrupt the trough at two localities: a northwest trending high in southern Washington and a northeast trending high between Mount Shasta and Lassen Peak. The latter anomaly is one of a set of northeast trending anomalies that, within the Quaternary arc, appear related to volcanic segmentation proposed previously on the basis of spatial and compositional distributions of volcanoes. These northeast trending anomalies extend hundreds of kilometers northeast of the arc, are caused by sources in the upper crust, and in some cases are related to exposed pre-Tertiary rocks. Segmentation models invoke geometric characteristics of the subducting plate as the primary factor controlling location and chemistry of volcanism, and these northeast trending gravity sources also may be a product of disturbance of the upper crust by the subduction process. More likely, the gravity sources may reflect upper crustal structures older than the High Cascades, possibly relicts from earlier accretionary events or more recent crustal deformation, that have actively influenced the spatial location of more recent volcanism. Much of the Pliocene and Quaternary volcanism of the Cascade arc has concentrated on or near contacts between crustal blocks of disparate density. These contacts may promote the ascension of magma to the Earth's surface.

Journal of Geophysical Research Solid Earth↗

Geophysical characterization of seismic station sites in the United States – The importance of a flexible, multi-method approach

Noninvasive geophysical site characterization methods were used in two recent projects to obtain shear-wave velocity (VS) profiles to a minimum depth of 30 m and the time-averaged VS of the upper 30 meters (VS30) at seismic station sites. These projects include the 2009 American Recovery and Reinvestment Act (ARRA) funded U.S. Geological Survey site characterization project for 191 sites in California and the Central-eastern United States (CEUS), and the 2012 Electric Power Research Institute (EPRI) funded project for 33 additional CEUS sites. These sites are located in rural to urban settings with topographic conditions ranging from relatively flat sedimentary basins to mountaintop ridges. About 60 percent of the ARRA sites and 80 percent of the EPRI sites are located on rock or have thin sediment cover over rock, including Quaternary volcanic rock, Tertiary sediments and sedimentary rock, and Mesozoic (or older) crystalline or sedimentary rock. The remaining sites consist of thick sequences of Quaternary sediments overlying older sediments and rock. ARRA sites were characterized using non-invasive active and passive surface-wave methods, including the horizontal-tovertical spectral ratio (HVSR) method and one or more of the following: spectral analysis of surface waves (SASW), multichannel analysis of surface waves (MASW; Rayleigh and Love waves) and, occasionally, array microtremor (linear and 2-D arrays) methods. P-wave seismic refraction data were also acquired at rock and shallow-rock sites. S-wave seismic refraction and/or Love-wave MASW methods were applied at sites where characterization proved difficult with Rayleighwave methods. Based on our experience from the ARRA project, we acquired Rayleigh- and Love-wave based MASW and P- and S-wave refraction data for the EPRI project at CEUS sites. The HVSR method was found to be useful for identifying shallow-rock sites and for evaluating the relative variability of the depth-to-rock interface beneath the seismic station and the testing array(s). The fundamental mode modeling assumption was generally valid at most of these sites; nevertheless, multi-mode or effective-mode modeling routines were occasionally required, particularly in the case of shallow high-velocity layers. Deep sediment sites were characterized using active and, when appropriate, passive surface-wave based methods. Rock and shallow sediment sites were generally more challenging to characterize than deep sediment sites. About 10 percent of rock sites could not be characterized using surface wave methods, thus these sites were characterized using body-wave refraction methods. Love wave methods were found to be more effective than Rayleigh wave methods at some rock and shallow-rock sites (e.g., sites with shallow rock and sites with a thin low-velocity, highly attenuating surface layer). Lateral velocity variability was found to be very common at rock and shallow-rock sites, often causing significant scatter in the surface-wave dispersion data. Seismic refraction models have demonstrated that it may not be unusual for VS30 to vary by 20 percent, or more, over small distances (several tens of meters) at such sites. Based on these experiences, it is important to consider the application of combinations of methods when using noninvasive geophysical approaches to characterize seismic site conditions.

Conference Paper↗