Search USGSSearch

SEARCH · Search USGS

Results for “MICROscope”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17Linked to original sources

Kink-bands: Shock deformation of biotite resulting from a nuclear explosion

Microscopic examination of granodiorite samples from the shock region around a nuclear explosion reveals sharply folded lens-shaped zones (kink-bands) in the mineral biotite. Fifty percent of these zones are oriented approximately 90 degrees to the direction of shock-wave propagation, but other zones are symmetrically concentrated at shear angles of 50 degrees and 70 degrees to the direction of shock-wave propagation.

Science

Metastable superheated ice in liquid-water inclusions under high negative pressure

In some microscopic inclusions (consisting of aqueous liquid and vapor) in minerals, freezing eliminates the vapor phase because of greater volume occupied by the resulting ice. When vapor fails to nucleate again on partial melting, the resulting negative pressure (hydrostatic tension) inside the inclusions permits the existence of ice I crystals under reversible, metastable equilibrium, at temperatures as high as +6.5°C and negative pressures possibly exceeding 1000 bars.

Science

Exsolution in clinoamphiboles

Ten amphibole specimens from a variety of metamorphic rocks such as talc schists, eclogites, and metamorphosed iron formations contain lamellae of a second amphibole oriented parallel to (1̅01) or (100), or both, of the host. Tremolites, actinolites, and hornblendes commonly have lamellae of a calcium-poor clinoamphibole with P 2 1 / m space-group symmetry, or lamellae of cummingtonite with C 2/ m space-group symmetry. Likewise cummingtonites and P 2 1 / m clinoamphiboles commonly contain lamellae of calcium-rich C 2/ m amphiboles such as tremolite. Results of x-ray diffraction, electron-probe, and microscope studies indicate that most lamellae result from unmixing of a homogeneous amphibole. The P 2 1 / m clinoamphibole is analogous to the clinopyroxene pigeonite in agreement with the results of M. G. Bown.

Science

Shock-produced olivine glass: First observation

Transmission electron microscope (TEM) observations of an experimentally shock-deformed single crystal of natural peridot, (Mg 0.88 Fe 0.12 ) 2 SiO 4 , recovered from peak pressures of about 56 × 10 9 pascals revealed the presence of amorphous zones located within crystalline regions with a high density of tangled dislocations. This is the first reported observation of olivine glass. The shocked sample exhibits a wide variation in the degree of shock deformation on a small scale, and the glass appears to be intimately associated with the highest density of dislocations. This study suggests that olivine glass may be formed as a result of shock at pressures above about 50 to 55 × 10 9 pascals and that further TEM observations of naturally shocked olivines may demonstrate the presence of glass.

Science

Elucidation of taste- and odor-producing bacteria and toxigenic cyanobacteria in a Midwestern drinking water supply reservoir by shotgun metagenomics analysis

While commonplace in clinical settings, DNA-based assays for identification or enumeration of drinking water pathogens and other biological contaminants remain widely unadopted by the monitoring community. In this study, shotgun metagenomics was used to identify taste-and-odor producers and toxin-producing cyanobacteria over a 2-year period in a drinking water reservoir. The sequencing data implicated several cyanobacteria, including Anabaena spp ., Microcystis spp ., and an unresolved member of the order Oscillatoriales as the likely principal producers of geosmin, microcystin, and 2-methylisoborneol (MIB), respectively. To further demonstrate this, quantitative PCR (qPCR) assays targeting geosmin-producing Anabaena and microcystin-producing Microcystis were utilized, and these data were fitted using generalized linear models and compared with routine monitoring data, including microscopic cell counts, sonde-based physicochemical analyses, and assays of all inorganic and organic nitrogen and phosphorus forms and fractions. The qPCR assays explained the greatest variation in observed geosmin (adjusted R 2 = 0.71) and microcystin (adjusted R 2 = 0.84) concentrations over the study period, highlighting their potential for routine monitoring applications. The origin of the monoterpene cyclase required for MIB biosynthesis was putatively linked to a periphytic cyanobacterial mat attached to the concrete drinking water inflow structure. We conclude that shotgun metagenomics can be used to identify microbial agents involved in water quality deterioration and to guide PCR assay selection or design for routine monitoring purposes. Finally, we offer estimates of microbial diversity and metagenomic coverage of our data sets for reference to others wishing to apply shotgun metagenomics to other lacustrine systems.

Kansas

Concentration and Detection of Cryptosporidium Oocysts in Surface Water Samples by Method 1622 Using Ultrafiltration and Capsule Filtration

The protozoan parasite Cryptosporidium parvum is known to occur widely in both source and drinking water and has caused waterborne outbreaks of gastroenteritis. To improve monitoring, the U.S. Environmental Protection Agency developed method 1622 for isolation and detection of Cryptosporidium oocysts in water. Method 1622 is performance based and involves filtration, concentration, immunomagnetic separation, fluorescent-antibody staining and 4???,6-diamidino-2-phenylindole (DAPI) counterstaining, and microscopic evaluation. The capsule filter system currently recommended for method 1622 was compared to a hollow-fiber ultrafilter system for primary concentration of C. parvum oocysts in seeded reagent water and untreated surface waters. Samples were otherwise processed according to method 1622. Rates of C. parvum oocyst recovery from seeded 10-liter volumes of reagent water in precision and recovery experiments with filter pairs were 42% (standard deviation [SD], 24%) and 46% (SD, 18%) for hollow-fiber ultrafilters and capsule filters, respectively. Mean oocyst recovery rates in experiments testing both filters on seeded surface water samples were 42% (SD, 27%) and 15% (SD, 12%) for hollow-fiber ultrafilters and capsule filters, respectively. Although C. parvum oocysts were recovered from surface waters by using the approved filter of method 1622, the recovery rates were significantly lower and more variable than those from reagent grade water. In contrast, the disposable hollow-fiber ultrafilter system was compatible with subsequent method 1622 processing steps, and it recovered C. parvum oocysts from seeded surface waters with significantly greater efficiency and reliability than the filter suggested for use in the version of method 1622 tested.

Applied and Environmental Microbiology

In-vitro replication of Chelonid herpesvirus 5 in organotypic skin cultures from Hawaiian green turtles (Chelonia mydas)

Fibropapillomatosis (FP) is a tumor disease of marine turtles associated with Chelonid herpesvirus 5 (ChHV5) that has historically been refractory to growth in tissue culture. Here, we show for the first time de novo formation of ChHV5-positive intranuclear inclusions in cultured green turtle cells, which is indicative for active lytic replication of the virus. The minimal requirements to achieve lytic replication in cultured cells included 1) either in-vitro culturing of ChHV5-positive tumor biopsies (plugs) or organotypic cultures (rafts) consisting of ChHV5-positive turtle fibroblasts in collagen rafts seeded with turtle keratinocytes and 2) keratinocyte maturation induced by raising raft or biopsy cultures to the air-liquid interface. Virus growth was confirmed by detailed electron microscopic studies revealing intranuclear sun-shaped capsid factories, tubules, various stages of capsid formation, nuclear export by budding into the perinuclear space, tegumentation, and envelopment to complete de novo virus production. Membrane synthesis was also observed as a sign for active viral replication. Interestingly, cytoplasmic particles became associated with keratin filaments, a feature not seen in conventional monolayer cell cultures where most studies of herpesvirus replication have been performed. Our findings draw a rich and realistic picture of ChHV5 replication in cells derived from its natural host and may be crucial not only to better understand ChHV5 circulation but also to eventually complete Koch's postulates for FP. Moreover, the principles described here may serve as model to culture other viruses that are resistant to replication in conventional cell culture.

Hawai'i

Experimental infection of snakes with Ophidiomyces ophiodiicola causes pathological changes that typify snake fungal disease

Snake fungal disease (SFD) is an emerging skin infection of wild snakes in eastern North America. The fungus Ophidiomyces ophiodiicola is frequently associated with the skin lesions that are characteristic of SFD, but a causal relationship between the fungus and the disease has not been established. We experimentally infected captive-bred corn snakes ( Pantherophis guttatus ) in the laboratory with pure cultures of O. ophiodiicola . All snakes in the infected group ( n = 8) developed gross and microscopic lesions identical to those observed in wild snakes with SFD; snakes in the control group ( n = 7) did not develop skin infections. Furthermore, the same strain of O. ophiodiicola used to inoculate snakes was recovered from lesions of all animals in the infected group, but no fungi were isolated from individuals in the control group. Monitoring progression of lesions throughout the experiment captured a range of presentations of SFD that have been described in wild snakes. The host response to the infection included marked recruitment of granulocytes to sites of fungal invasion, increased frequency of molting, and abnormal behaviors, such as anorexia and resting in conspicuous areas of enclosures. While these responses may help snakes to fight infection, they could also impact host fitness and may contribute to mortality in wild snakes with chronic O. ophiodiicola infection. This work provides a basis for understanding the pathogenicity of O. ophiodiicola and the ecology of SFD by using a model system that incorporates a host species that is easy to procure and maintain in the laboratory. IMPORTANCE Skin infections in snakes, referred to as snake fungal disease (SFD), have been reported with increasing frequency in wild snakes in the eastern United States. While most of these infections are associated with the fungus Ophidiomyces ophiodiicola , there has been no conclusive evidence to implicate this fungus as a primary pathogen. Furthermore, it is not understood why the infections affect different host populations differently. Our experiment demonstrates that O. ophiodiicola is the causative agent of SFD and can elicit pathological changes that likely impact fitness of wild snakes. This information, and the laboratory model we describe, will be essential in addressing unresolved questions regarding disease ecology and outcomes of O. ophiodiicola infection and helping to conserve snake populations threatened by the disease. The SFD model of infection also offers utility for exploring larger concepts related to comparative fungal virulence, host response, and host-pathogen evolution.

mBio

Draft genome sequence of Picocystis strain ML cultivated from Mono Lake, California

The microscopic alga Picocystis sp. strain ML is responsible for recurrent algal blooms in Mono Lake, CA. This organism was characterized by only very little molecular data, despite its prominence as a primary producer in saline environments. Here, we report the draft genome sequence for Picocystis sp. strain ML based on long-read sequencing.

California

Petrography, structures, and petrofabrics of the Pinckneyville quartz diorite, Alabama

The Pinckneyville quartz diorite complex underlies an area in eastern Alabama extending from the Coosa River in northwest Elmore County northeast through Coosa and Tallapoosa counties into Clay County. Dark-gray, coarse-grained quartz diorite gneiss constitutes the major part of the complex, but there are smaller amounts of granodiorite and granite gneiss. Hornblende-biotite gneisses also occur and are considered to represent metamorphosed basic sills and dikes intruded before the quartz diorite complex. Schist septa lie within the complex and are usually parallel to the regional strike. The sequence of intrusion as interpreted from inclusions and petrographic data is (1) quartz diorite, (2) granodiorite, (3) granite. Small but persistent amounts of allanite and epidote are characteristic of the rocks of the complex. The texture is subporphyritic and shows evidence of protoclastic deformation. A northeast-southwest trend of inclusions, foliation, lineation, and contacts dominates. Primary flow structures are shown in the orientation of inclusions and micas. Secondary structures were superposed on the original flow structures shortly after intrusion and prior to complete consolidation. A prominent secondary structure is a lineation in b. Stretching in b is indicated by boudinage structures, the lineation, and small displacements of dikes. The intensity of the planar structures in the gneiss grades from strong to indistinct or lacking from east to west. Structures in schist inclusions indicate that some folding had taken place prior to intrusion. Thin pegmatite, granodiorite, and granite dikes are common. Most of them are essentially parallel to the regional strike. The petrographic boundary between gneiss and schist is always sharp. On a large scale, the gneiss structures are essentially parallel to the contacts, but slight to marked discordant relations occur at many localities. The schist structures usually parallel the contacts. Petrofabric analysis confirms the structural field observations. The mica fabrics are ac -girdles and are most complete where the foliation is weakest. Microscopic s -planes do not always coincide with the observed foliation. The quartz fabrics are also ac -girdles but are not so well developed as the mica girdles. Quartz orientations cannot always be related to known s -planes. It is concluded that the Pinckneyville quartz diorite complex represents a syntectonic intrusion—that is, that intrusion took place while external or regional forces were still active. The shape of the intrusion was controlled largely by the wall-rock structures which had developed earlier. The rocks show both igneous and metamorphic characteristics because the intrusion took place under regional metamorphic conditions.

Alabama

Magmatic differentiation in tertiary and quaternary volcanic rocks from Adak and Kanaga Islands, Aleutian Islands, Alaska

Samples of 17 volcanic rocks of Tertiary and Quaternary age from Adak and Kanaga islands have been chemically analyzed and studied microscopically. Spectrograms have been made of 10 of them. The rocks from Adak represent one center of possibly older Tertiary age and two centers of younger Tertiary or Quaternary age. The rocks from Kanaga Island represent both a shield volcano of possibly Tertiary age, partly destroyed by the formation of a caldera, and a young cone of Quaternary age that has grown within the caldera. All the rocks are basalt or andesite. Modally, all are characterized by relatively large crystals of plagioclase more calcic than andesine, and by one or more of the following ferromagnesian minerals: olivine, hypersthene, augite, and hornblende. Apatite and iron ores are common, and late silica minerals and orthoclase occur interstitially in the groundmasses of some rocks . As analyses of no more than four samples are available for each center, the small differences between sets of analyses representing different centers are of doubtful significance. Consequently, the analyses representing all the centers have been plotted on each of the several diagrams used. The several types of variation diagrams show that the province is a calc-alkaline one. The alkali-lime index is in the neighborhood of 63. This very high value is comparable with that for Katmai and is only slightly less than the maximum for the Japanese volcanic rock series. The quantities of minor constituents present are not exceptional for the rock types analyzed; the rocks from Adak are apparently more strontium-rich than those from Kanaga . The chemical analyses of the more basic rock types, as compared with the average analysis of plateau basalt, suggest that the Aleutian parental magma could have been derived from a plateau basalt magma by the addition of plagioclase and the subtraction of pyroxene, iron ore, and some quartz. The distribution of the minor elements can be explained more easily by postulating that, at least on Kanaga Island , some sediments have been assimilated. The derivation of the analyzed rocks from the Aleutian parental magma is most easily explained by the hypothesis that the plagioclase remained in suspension while the ferromagnesian minerals were settling out.

Alaska

Yakima basalt of the Tieton River area, south-central Washington

Up to 1700 feet of the upper Miocene-lower Pliocene Yakima Basalt of the Columbia River Group underlie much of the eastern flank of the Cascade Range in the Tieton River area, Yakima County, Washington. Local prebasalt relief was more than 1700 feet, so thicknesses of each of the 15 exposed flows vary widely. Single flows can be traced for many miles, and terminate only against local topographic highs. The flows show typical colonnade-entablature jointing, and commonly overlie thin pillow-palagonite complexes. The basalts have Yakima-type chemistry. Plagioclase varies chiefly from An 65 (microphenocrysts) to An 45 (microlites). Clinopyroxenes range from Ca-rich pigeonite to augite, with subcalcic augite most abundant. Complex continuous zoning with respect to optic angles occurs between all the clinopyroxene phases. Olivine is sparse, and phenocrysts of all minerals are rare. Plots of 40 modal analyses indicate that plagioclase and pyroxene began crystallizing at about the same time, and crystallized at the same rate until the flows were at least 75 per cent crystalline. Individual flows differ in their plagioclase/pyroxene ratios and, to a lesser degree, in other microscopic characteristics. Therefore they can be correlated between the measured sections. The stratigraphy thus defined indicates that the youngest flow in the area is slightly older than the Vantage Sandstone Member (about 13.5 m.y.), a prominent sedimentary interbed farther east on the Columbia River Plateau. Flow directions show that the basalts advanced into the area from the east and southeast. Sedimentary interbeds between some of the flows contain a heavy mineral suite indicative of a northern or northeastern provenance, and crossbedding measurements suggest westward and southwestward current directions. The regional paleoslope, therefore, sloped westward or southwestward; and the basalts probably extended somewhat beyond the present Cascade Crest before being dammed by the ancient Western Cascades. Floods of pyrogenic hornblende in the interbeds and overlapping K/A ages suggest sporadic explosive activity of Tatoosh-type plutons in the Cascades contemporaneous with Yakima extrusions. The basalts are warped into five nearly west-trending folds and an eastward-sloping homocline. The homocline is related directly to Cascade uplift, which may have begun at about the time that Yakima-type flows ceased flooding the area.

Geological Society of America Bulletin

Green River oil shale—concept of origin extended: An interdisciplinary problem being attacked from both ends

A much fuller understanding of the Green River oil shale and its organic chemistry will emerge when the geologists, paleontologists, organic chemists, biologists, paleolimnologists, and biogeochemists, who are now working on it, integrate their findings with those of the others. We know from the geology, paleontology, and paleolimnology that the biologic progenitors of the organic substance in the Green River oil shale could only have been microscopic algae, and other micro-organisms, that grew and accumulated in the central parts of large, shallow lakes that existed under a subtropical climate. The only nonlacustrine organic components were wind-blown, or water borne, pollens and waxy spores. These, however, made up a large and important part of the organic-rich sediment. The geology of the Green River Formation shows that as the algal and pollen-rich sediment was buried deeper and deeper, progressively more of its pore water and dissolved constituents were expressed. Static pressures may have reached as much as 210 kg cm −2 , and the ambient temperature rose, with depth, to somewhere within the range between 90° and 125° C. Beneath the ancient lakes a tectonically quiescent environment persisted for tens of millions of years after their organic sediments had been deeply buried. The organic material of the Green River oil shale can be divided into three fractions—a small bitumen fraction that is extractable with common organic solvents, a major fraction called koerogen that consists of insoluble pyrobitumens, and a somewhat smaller inert fraction that is neither soluble nor does it yield oil on pyrolysis. As all three fractions originated in the same algal, pollen-rich sediment, an explanation for their marked differences must be sought in their geochemical history or from a study of the modern analogues of their progenitors. The components of the bitumen fraction consisted of “biological markers” that were inherited from the Eocene plants and animals in which they originally formed. Diagenesis has changed these hydrogen-rich compounds, but not enough to obscure their provenance. Kerogen presumably became insoluble because its hydrogen-rich components polymerized. My speculation is that the inert fraction was derived from a polyphenolic substance produced in the original algal ooze by “non-enzymatic browning.” Only three Classes of non-marine algae need be considered as progenitors of the Green River oil shale; the Xanthophyceae, the Chlorophyceae, and the Cyanophyceae. Only the Cyanophyceae (the blue-green algae) meet the biologic and paleontologic requirements to have served as the dominant precursors of the Green River oil shale. Several other oil shales clearly were derived from the Xanthophyceae, specifically Botryococcus. The blue-green algal ooze now forming, and accumulating, in Mud Lake, Florida, has been studied biologically and chemically as a possible present-day analogue of the Green River oil shale precursor. In this small lake we have established the fact that a bacterial inhibitor is produced, which inhibits decay of the algae and thereby permits the accumulation of energy-rich organic compounds. We infer that a similar indigenous inhibitor must have acted in the Eocene lakes to permit them to become the huge energy sinks they were. Studies of the organic chemistry of living blue-green algae show that they contain appreciable percentages of fatty acids, hydrocarbons, and very large percentages of proteins. These promising, energy-rich compounds could serve as source materials for potential conversion into oil shale in the geologic future. Certain marine anaerobic bacteria convert fatty acids into aliphatic hydrocarbons. Fresh-water obligate anaerobes should be investigated to see if they also convert fatty acids into hydrocarbons. The part played by aquatic animals that live in, or on, freshwater algal ooze in synthesizing hydrocarbons has not been investigated, but deserves attention. Pollen grains, of course, must be considered an important precursor of hydrocarbons produced on pyrolysis. They contain far higher percentages of long chain hydrocarbons and alcohols than most plant materials. The major problem ahead is to account for the progressive hydrogenation and subsequent polymerization of the relatively oxygen-rich constituents of algae such as the polysaccharides, amino acids, ammo sugars, and fatty acids into the insoluble pyrobitumens that constitute, particularly, the kerogen fraction of the Green River oil shale.

Wyoming

Productivity cycles of 200-300 years in the Antarctic Peninsula region: Understanding linkages among the sun, atmosphere, oceans, sea ice, and biota

Compared to the rest of the world's oceans, high-resolution late Holocene paleoclimatic data from the Southern Ocean are still rare. We present a multiproxy record from a sediment core retrieved from a deep basin on the western side of the Antarctic Peninsula that reveals a dramatic perspective on paleoclimatic changes over the past 3700 yr. Analyses completed include measurement of magnetic susceptibility and granulometry, bed thickness, particle size, percent organic carbon, bulk density, and microscopic evaluation of diatom and benthic foraminiferal assemblages and abundances. Downcore variability of these parameters demonstrates the significance of both short-term cycles, which recur approximately every 200 yr, and longer term events (≈2500 yr cycles) that are most likely related to global climatic fluctuations.

Geological Society of America Bulletin

Petrographic observations on the Exmore breccia, ICDP-USGS drilling at Eyreville, Chesapeake Bay impact structure, USA

The International Continental Scientific Drilling Program (ICDP)-U.S. Geological Survey (USGS) Eyreville A and B drill cores sampled crater fill in the region of the crater moat, ??9 km to the NE of the center of the Chesapeake Bay impact structure, Virginia, USA. They provide a 953 m section (444-1397 m depth) of sedimentary clast breccia and intercalated sedimentary and crystalline megablocks knownas Exmore beds, deposited on top of the impactite sequence between 1397 and 1551 m depth. We petrographically investigated the sandy-clayey groundmass-dominated breccia, which resembles a diamictite ("Exmore breccia"), and which, in its lower parts, carries sedimentary and crystalline blocks. The entire breccia interval is characterizedby the presence of glauconite and bioclastic carbonate, which distinguishes the Exmore breccia from other sandy facies above and below in the stratigraphy. The sediment-clast breccia exhibits strong heterogeneity from sample to sample with respect to groundmass nature, e.g., clay versus sand content, as well as clast content, in general, and shocked clast content, in particular. There is a consistently signifi cantly larger macroscopic sedimentary to crystalline clast content. On the microscopic scale, the intersample sediment to crystalline clast ratios are quite variable. A very small component of shocked material, in the form of shock-deformed quartz, and to an even lesser degree feldspar, and somewhat more abundant but still relatively scarce shardshaped,altered melt particles, is present throughout the section. However, between ??458 and 469 m, and between 514 and 527 m depths, the abundance of such melt particlesis notably enhanced. These sections are also chemically distinct and relatively more mafic than the other parts of the Exmore breccia. It appears that from the time of deposition of the 527 m material, calming of the ocean occurred over the crater area as a result of abatement of resurge activity, so that ejecta from the plume abovethe crater could accumulate within the crater area to a larger degree. Deposition ofejecta fallout from the collapsing ejecta plume was terminated by the time of deposition of the 458 m material. This raises questions about the positioning of the exact upper contact of Exmore breccia to post-Exmore sediment (Chickahominy Formation), which is currently placed at 444 m depth and which possibly should be revisedto 458 m depth. Based on a signifi cant record of granite-derived material with shocked minerals, the shocked debris component seems to be largely derived from crystalline target rocks. This provides further evidence that the basement-derived material of the basal section of the Eyreville drill cores, which is essentially unshocked, is likely of an allochthonous nature and that the drilling did not intersect the actual crater floor. 76??W. ?? 2009 Geological Society of America.

Special Paper of the Geological Society of America

Geologic history of the Blackbird Co-Cu district in the Lemhi subbasin of the Belt-Purcell Basin

The Blackbird cobalt-copper (Co-Cu) district in the Salmon River Mountains of east-central Idaho occupies the central part of the Idaho cobalt belt—a northwest-elongate, 55-km-long belt of Co-Cu occurrences, hosted in grayish siliciclastic metasedimentary strata of the Lemhi subbasin (of the Mesoproterozoic Belt-Purcell Basin). The Blackbird district contains at least eight stratabound ore zones and many discordant lodes, mostly in the upper part of the banded siltite unit of the Apple Creek Formation of Yellow Lake, which generally consists of interbedded siltite and argillite. In the Blackbird mine area, argillite beds in six stratigraphic intervals are altered to biotitite containing over 75 vol% of greenish hydrothermal biotite, which is preferentially mineralized. Past production and currently estimated resources of the Blackbird district total ~17 Mt of ore, averaging 0.74% Co, 1.4% Cu, and 1.0 ppm Au (not including downdip projections of ore zones that are open downward). A compilation of relative-age relationships and isotopic age determinations indicates that most cobalt mineralization occurred in Mesoproterozoic time, whereas most copper mineralization occurred in Cretaceous time. Mesoproterozoic cobaltite mineralization accompanied and followed dynamothermal metamorphism and bimodal plutonism during the Middle Mesoproterozoic East Kootenay orogeny (ca. 1379–1325 Ma), and also accompanied Grenvilleage (Late Mesoproterozoic) thermal metamorphism (ca. 1200–1000 Ma). Stratabound cobaltite-biotite ore zones typically contain cobaltite 1 in a matrix of biotitite ± tourmaline ± minor xenotime (ca. 1370–1320 Ma) ± minor chalcopyrite ± sparse allanite ± sparse microscopic native gold in cobaltite. Such cobaltite-biotite lodes are locally folded into tight F 2 folds with axial-planar S 2 cleavage and schistosity. Discordant replacement-style lodes of cobaltite 2 -biotite ore ± xenotime 2 (ca. 1320–1270 Ma) commonly follow S 2 fractures and fabrics. Discordant quartz-biotite and quartz-tourmaline breccias, and veins contain cobaltite 3 ± xenotime 3 (ca. 1058–990 Ma). Mesoproterozoic cobaltite deposition was followed by: (1) within-plate plutonism (530–485 Ma) and emplacement of mafic dikes (which cut cobaltite lodes but are cut by quartz-Fe-Cu-sulfide veins); (2) garnet-grade metamorphism (ca. 151–93 Ma); (3) Fe-Cu-sulfide mineralization (ca. 110–92 Ma); and (4) minor quartz ± Au-Ag ± Bi mineralization (ca. 92–83 Ma). Cretaceous Fe-Cu-sulfide vein, breccia, and replacement-style deposits contain various combinations of chalcopyrite ± pyrrhotite ± pyrite ± cobaltian arsenopyrite (not cobaltite) ± arsenopyrite ± quartz ± siderite ± monazite (ca. 144–88 Ma but mostly 110–92 Ma) ± xenotime (104–93 Ma). Highly radiogenic Pb (in these sulfides) and Sr (in siderite) indicate that these elements resided in Mesoproterozoic source rocks until they were mobilized after ca. 100 Ma. Fe-Cu-sulfide veins, breccias, and replacement deposits appear relatively undeformed and generally lack metamorphic fabrics. Composite Co-Cu-Au ore contains early cobaltite-biotite lodes, cut by Fe-Cu-sulfide veins and breccias, or overprinted by Fe-Cu-sulfide replacement-style deposits, and locally cut by quartz veinlets ± Au-Ag ± Bi minerals.

Idaho

Creation of a continent recorded in zircon zoning

We have discovered a robust microcrystalline record of the early genesis of North American lithosphere preserved in the U-Pb age and oxygen isotope zoning of zircons from a lower crustal paragneiss in the Neoarchean Superior province. Detrital igneous zircon cores with ??18O values of 5.1???-7.1??? record creation of primitive to increasingly evolved crust from 2.85 ?? 0.02 Ga to 2.67 ?? 0.02 Ga. Sharp chemical unconformity between cores and higher ??18O (8.4???-10.4???) metamorphic overgrowths as old as 2.66 ?? 0.01 Ga dictates a rapid sequence of arc unroofing, burial of detrital zircons in hydrosphere-altered sediment, and transport to lower crust late in upper plate assembly. The period to 2.58 ?? 0.01 Ga included ???80 m.y. of high-temperature (???700-650 ??C), nearly continuous overgrowth events reflecting stages in maturation of the subjacent mantle root. Huronian continental rifting is recorded by the youngest zircon tip growth at 2512 ?? 8 Ma (??? 600 ??C) signaling magma intraplating and the onset of rigid plate behavior. This >150 m.y. microscopic isotope record in single crystals demonstrates the sluggish volume diffusion of U, Pb, and O in zircon throughout protracted regional metamorphism, and the consequent advances now possible in reconstructing planetary dynamics with zircon zoning. ?? 2008 The Geological Society of America.

Geology

Trace elements in hydrothermal quartz: Relationships to cathodoluminescent textures and insights into vein formation

High-resolution electron microprobe maps show the distribution of Ti, Al, Ca, K, and Fe among quartz growth zones revealed by scanning electron microscope-cathodoluminescence (SEM-CL) from 12 hydrothermal ore deposits formed between ???100 and e1750 ??C. The maps clearly show the relationships between trace elements and CL intensity in quartz. Among all samples, no single trace element consistently correlates with variations in CL intensity. However in vein quartz from five porphyry-Cu (Mo-Au) deposits, CL intensity always correlates positively with Ti concentrations, suggesting that Ti is a CL activator in quartz formed at >400 ??C. Ti concentrations in most rutile-bearing vein quartz from porphyry copper deposits indicate reasonable formation temperatures of <750 ??C using the TitaniQ geothermometer. Titanium concentrations of <10 ppm in all veins that formed at temperatures <350 ??C suggest broad correlation between Ti concentrations and temperature of quartz precipitation. In quartz from most deposits formed at <350 ??C, bimodal Al concentrations exist wherein some growth bands contain <50 ppm and others contain >2000 ppm, but in high-temperature quartz, Al concentrations are consistently in the range of several hundred ppm. Aluminum concentrations in quartz refl ect the Al solubility in hydrothermal fluids, which is strongly dependent on pH. Aluminum concentrations in quartz therefore reflect fluctuations in pH that may drive metal-sulfide precipitation in hydrothermal systems. ?? 2008 The Geological Society of America.

Geology