SEARCH · Search USGS

Results for “Facies”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17Linked to original sources

USGS2005

Petrophysics of Lower Silurian sandstones and integration with the tectonic-stratigraphic framework, Appalachian basin, United States

Petrophysical properties were determined for six facies in Lower Silurian sandstones of the Appalachian basin: fluvial, estuarine, upper shoreface, lower shoreface, tidal channel, and tidal flat. Fluvial sandstones have the highest permeability for a given porosity and exhibit a wide range of porosity (2-18%) and permeability (0.002-450 md). With a transition-zone thickness of only 1-6 m (3-20 ft), fluvial sandstones with permeability greater than 5 md have irreducible water saturation (Siw) less than 20%, typical of many gas reservoirs. Upper shoreface sandstones exhibit good reservoir properties with high porosity (10-21%), high permeability (3-250 md), and low S iw (<20%). Lower shoreface sandstones, which are finer grained, have lower porosity (4-12%), lower permeability (0.0007-4 md), thicker transition zones (6-180 m [20-600 ft]), and higher S iw. In the tidal-channel, tidal-flat, and estuarine facies, low porosity (average < 6%), low permeability (average < 0.02 md), and small pore throats result in large transition zones (30-200 m; 100-650 ft) and high water saturations. The most favorable reservoir petrophysical properties and the best estimated production from the Lower Silurian sandstones are associated with fluvial and upper shoreface facies of incised-valley fills, which we interpret to have formed predominantly in areas of structural recesses that evolved from promontories along a collisional margin during the Taconic orogeny. Although the total thickness of the sandstone may not be as great in these areas, reservoir quality is better than in adjacent structural salients, which is attributed to higher energy depositional processes and shallower maximum burial depth in the recesses than in the salients. Copyright ??2005. The American Association of Petroleum Geologists. All rights reserved.

American Association of Petroleum Geologists Bulle↗

USGS2007

Oil and gas geochemistry and petroleum systems of the Fort Worth Basin

Detailed biomarker and light hydrocarbon geochemistry confirm that the marine Mississippian Barnett Shale is the primary source rock for petroleum in the Fort Worth Basin, north-central Texas, although contributions from other sources are possible. Biomarker data indicate that the main oil-generating Barnett Shale facies is marine and was deposited under dysoxic, strong upwelling, normal salinity conditions. The analysis of two outcrop samples and cuttings from seven wells indicates variability in the Barnett Shale organic facies and a possibility of other oil subfamilies being present. Light hydrocarbon analyses reveal significant terrigenous-sourced condensate input to some reservoirs, resulting in terrigenous and mixed marine-terrigenous light hydrocarbon signatures for many oils. The light hydrocarbon data suggest a secondary, condensate-generating source facies containing terrigenous or mixed terrigenous-marine organic matter. This indication of a secondary source rock that is not revealed by biomarker analysis emphasizes the importance of integrating biomarker and light hydrocarbon data to define petroleum source rocks. Gases in the Fort Worth Basin are thermogenic in origin and appear to be cogenerated with oil from the Barnett Shale, although some gas may also originate by oil cracking. Isotope data indicate minor contribution of biogenic gas. Except for reservoirs in the Pennsylvanian Bend Group, which contain gases spanning the complete range of observed maturities, the gases appear to be stratigraphically segregated, younger reservoirs contain less mature gas, and older reservoirs contain more mature gas. We cannot rule out the possibility that other source units within the Fort Worth Basin, such as the Smithwick Shale, are locally important petroleum sources. Copyright ?? 2007. The American Association of Petroleum Geologists. All rights reserved.

American Association of Petroleum Geologists Bulle↗

USGS2012

Cambrian-lower Middle Ordovician passive carbonate margin, southern Appalachians

The southern Appalachian part of the Cambrian–Ordovician passive margin succession of the great American carbonate bank extends from the Lower Cambrian to the lower Middle Ordovician, is as much as 3.5 km (2.2 mi) thick, and has long-term subsidence rates exceeding 5 cm (2 in.)/k.y. Subsiding depocenters separated by arches controlled sediment thickness. The succession consists of five supersequences, each of which contains several third-order sequences, and numerous meter-scale parasequences. Siliciclastic-prone supersequence 1 (Lower Cambrian Chilhowee Group fluvial rift clastics grading up into shelf siliciclastics) underlies the passive margin carbonates. Supersequence 2 consists of the Lower Cambrian Shady Dolomite–Rome-Waynesboro Formations. This is a shallowing-upward ramp succession of thinly bedded to nodular lime mudstones up into carbonate mud-mound facies, overlain by lowstand quartzose carbonates, and then a rimmed shelf succession capped by highly cyclic regressive carbonates and red beds (Rome-Waynesboro Formations). Foreslope facies include megabreccias, grainstone, and thin-bedded carbonate turbidites and deep-water rhythmites. Supersequence 3 rests on a major unconformity and consists of a Middle Cambrian differentiated rimmed shelf carbonate with highly cyclic facies (Elbrook Formation) extending in from the rim and passing via an oolitic ramp into a large structurally controlled intrashelf basin (Conasauga Shale). Filling of the intrashelf basin caused widespread deposition of thin quartz sandstones at the base of supersequence 4, overlain by widespread cyclic carbonates (Upper Cambrian lower Knox Group Copper Ridge Dolomite in the south; Conococheague Formation in the north). Supersequence 5 (Lower Ordovician upper Knox in the south; Lower to Middle Ordovician Beekmantown Group in the north) has a basal quartz sandstone-prone unit, overlain by cyclic ramp carbonates, that grade downdip into thrombolite grainstone and then storm-deposited deep-ramp carbonates. Passive margin deposition was terminated by arc-continent collision when the shelf was uplifted over a peripheral bulge while global sea levels were falling, resulting in the major 0- to 10-m.y. Knox–Beekmantown unconformity. The supersequences and sequences appear to relate to regionally traceable eustatic sea level cycles on which were superimposed high-frequency Milankovitch sea level cycles that formed the parasequences under global greenhouse conditions.

southern Appalachian Mountains↗

USGS1980

Paleoenvironment of the New Albany Shale Group ( Devonian- Mississippian) of Illinois

The distribution of lithofacies in the New Albany Shale Group of Illinois was determined by wave energy, bottom oxygenation, and bottom topography in a deep water stratified anoxic basin. A transect from the margin to the center of the Illinois Basin reveals a complete transition from high energy, aerobic, shallow-water environments to quiet, anaerobic, deep-water environments. Shallow areas at the margin of the basin are characterized by rapid facies transitions over short distances. High energy, very shallow conditions are recorded by oolitic-skeletal grainstones and packstones with abundant brachiopods, crinoids, trilobites, and other calcified marine invertebrates. Bioturbation did not destroy primary sedimentary structures in these facies. Offshore, less agitated areas are represented by highly bioturbated carbonate wackestones, argillaceous quartz siltstones, and greenish-gray mudstones. Calcified invertebrates are generally rare in these facies, indicating deposition in dysaerobic conditions. Basinward, slope areas are characterized by olive-gray to black, weakly bioturbated shales commonly interbedded with thickly laminated black shales. Trace fossils, including Zoophycos, Chondrites , and Planolites , are abundant along the bases of the olive-gray beds. In areas where the anaerobic/dysaerobic boundary intersected the bottom slope, slight fluctuations of the position of the boundary resulted in thin interbedding of olive-gray and black shales and laterally persistent interfingering of the two lithologies. Anaerobic conditions prevailed during most of New Albany time in the deepest areas of the basin, and finely laminated, undisturbed, pelagic black shales were deposited.

Journal of Sedimentary Petrology↗

USGS1981

Progradational sequences in Miocene shoreline deposits, southeastern Caliente Range, California

An exceptionally well exposed marine-nonmarine transition in middle Miocene strata exists in the southeastern Caliente Range, California. About 50 individual progradational sequences form a succession that ranges in thickness from approximately 1000 m (where predominantly nonmarine) to more than 2500 m (where predominantly marine). Paleogreographic evidence in basalt flows near the top of the succession and in overlying fluvial deposists indicates that these middle Miocene strata were deposited across a north-northwest trending shoreline. A complete progradational sequence typically is several meters to a few tens of meters thick and includes strata that represent three intertonguing stratigraphic units. Individual sequences generally rest on a thin gravel deposit interpreted as a transgressive lag on an erosional surface. The gravel is overlain by structureless siltstone or fine-grained sandstone deposited at water depths where the rate of faunal mixing exceeded that of production of structures by physical processes. These rocks grade upward into bedded fine sandstone deposited closer to shore where physical processes exceeded bioturbation. Crossbedded lenses of coarse sand or fine gravel in the upper part of this facies suggest the presence of failry long-period surface waves. The bedded fine sandstone is sharply overlain by a crossbedded coarse sandstone facies that is interpreted as a combined offshore bar-rip channel-surf zone assemblage. Cross-strata dip dominantly offshore, suggesting substantial deposition from rip currents. A secondary, shore=parallel mode of cross-strata direction suggests longshore currents produced by surface waves from the northwest. The crossbedded coarse-grained sandstone grades upward into planar-bedded medium-grained sandstone that is interpreted as a beach foreshore. This facies grades upward through structureless medium-grained sandstone into nonmarine or lagoonal red and green mudstone of the Caliente Formation. The middle Miocene succession was deposited in a subsiding basin that was otherwise remarkably stable tectonically; the position of the strand line differed no more than a few kilometers through a period of 1 to 3 m.y. The average duration of the transgressive-regressive cycles, a few tens of thousands of years, together with their distribution in groups of three or four in the lower two-thirds of the succession, is consistent with the pattern of long-term climatic cycles produced by periodicity of the earth's solar orbit and may be related to eustatic sea level changes attendant to the development of the Antarctic ice cap. Changes in the pattern of progradation in the upper part of the succession and nearby basaltic eruptions may hav been precursors to the onset of movement along the San Andreas fault in this area 12-14 m.y. ago.

California↗

USGS1992

Lithofacies analysis of colluvial sediments - an aid in interpreting the recent history of Quaternary normal faults in the Basin and Range Province, western United States

Inferring the frequency and magnitude of past earthquakes from the stratigraphy in exposures of normal-faulted sediments is difficult because colluvial lithofacies assemblages adjacent to faults are complex. Similarities in facies assemblages adjacent to young fault scarps in arid to semiarid areas, such as the Basin and Range province, allow lithofacies to be grouped into two genetic architectural elements: debris and wash elements. Upper and lower facies associations can commonly be recognized within each element. A lithofacies code scheme, similar to those used in the analysis of fluvial and glacial lithofacies sequences, provides a concise way of illustrating lithofacies relations in fault exposures. The source lithology of colluvial lithofacies is shown in the code, and soil-horizon symbols can be included. The architecture of lithofacies assemblages near fault scarps in semiarid areas is explained by a model of colluvial sedimentation in response to a single surface faulting event. Analysis of lithofacies assemblages exposed in three trenches across normal faults in the eastern Basin and Range shows how the model can be used to interpret fault histories. Similar facies analysis methods may be useful in interpreting colluvial sequences formed by non-tectonic processes.

Journal of Sedimentary Petrology↗

USGS2005

Impact of longer-term modest climate shifts on architecture of high-frequency sequences (Cyclothems), Pennsylvanian of midcontinent U.S.A

Pennsylvanian glacioeustatic cyclothems exposed in Kansas and adjacent areas provide a unique opportunity to test models of the impact of relative sea level and climate on stratal architecture. A succession of eight of these high-frequency sequences, traced along dip for 500 km, reveal that modest climate shifts from relatively dry-seasonal to relatively wet-seasonal with a duration of several sequences (???600,000 to 1 million years) had a dominant impact on facies, sediment dispersal patterns, and sequence architecture. The climate shifts documented herein are intermediate, both in magnitude and duration, between previously documented longer-term climate shifts throughout much of the Pennsylvanian and shorter-term shifts described within individual sequences. Climate indicators are best preserved at sequence boundaries and in incised-valley fills of the lowstand systems tracts (LST). Relatively drier climate indicators include high-chroma paleosols, typically with pedogenic carbonates, and plant assemblages that are dominated by gymnosperms, mostly xerophytic walchian conifers. The associated valleys are small (<2 km wide and <11 m deep) and are commonly filled with locally derived limestone clasts, which indicate small drainage networks. Relatively wetter climates are indicated by locally preserved paleosols exhibiting both low-chroma and high-chroma variants, common coals, and plant assemblages that are dominated by fern foliage, seed ferns, and sphenopsids. The incised-valley fills associated with these facies are large (>4 km wide and >20 m deep), and dominated by quartz sandstones derived from distant source areas, reflecting large drainage networks. Transgressive systems tracts (TST) in all eight sequences gen erally are characterized by thin, extensive limestones and thin marine shales, suggesting that the dominant control on TST facies distribution was the sequestration of siliciclastic sediment in updip positions. Highstand systems tracts (HST) were significantly impacted by the intermediate-scale climate cycle in that HSTs from relatively drier climates consist of thin marine shales overlain by extensive, thick regressive limestones, whereas HSTs from relatively wetter climates are dominated by thick marine shales. Previously documented relative sea-level changes do not track the climate cycles, indicating that climate played a role distinct from that of relative sea-level change. These intermediate-scale modest climate shifts had a dominant impact on sequence architecture. This independent measure of climate and relative sea level may allow the testing of models of climate and sediment supply based on modern systems. Copyright ?? 2005, SEPM.

Journal of Sedimentary Research↗

USGS2021

Testing hypotheses on signatures of precipitation variability in the river and floodplain deposits of the Paleogene San Juan Basin, New Mexico, USA

Much progress has been made in recent years towards a set of recognition criteria for river discharge variability in river channel deposits, and thus sedimentary proxies for precipitation variability. Despite this progress, there is currently no consensus on how different styles of discharge variability are reflected in river sedimentary records, and whether variable-discharge river records from different climate types can be distinguished. Herein, river discharge and precipitation variability in the Paleogene is investigated using associations between river channel and floodplain deposits across the Paleocene-Eocene boundary from the Paleocene upper Nacimiento Formation and the early Eocene San Jose Formation in the San Juan Basin, New Mexico, USA. The succession is identified as deposits of variable-discharge river systems based on shared channel-deposit characteristics with modern and ancient variable-discharge river systems and the proposed facies models, in addition to alternations of poorly drained and well-drained floodplain deposits and/or slickensides indicating alternating wet-dry cycles. A long-term stratigraphic trend toward increasingly well-drained floodplain deposits is also observed and hypothesized to indicate successively more arid conditions from the Paleocene into the early Eocene. Comparisons with modern rivers from various climate zones suggest a long-term shift from a monsoonal climate in the Paleocene, to a fluctuating subhumid climate, ultimately leading to semiarid to arid conditions in the early Eocene. These observations suggest that floodplain deposits may be a better indicator of ambient climate, whereas channel deposits are records for frequency and magnitude of high-intensity precipitation events. Therefore, the existing facies models for variable-discharge rivers that consider only channel facies may not capture critical information needed to make accurate interpretations of paleoclimatic conditions. This study also adds to a growing body of evidence from geologic records of mid-latitude Paleogene river systems suggesting increases in the magnitude or variability of river discharge coinciding with established climate perturbations.

New Mexico↗

USGS1963

Bedrock Geology and Asbestos Deposits of the Upper Missisquoi Valley and Vicinity, Vermont

The upper Missisquoi Valley and vicinity as described in this report covers an area of about 250 square miles at the headwaters of the Missisquoi River in north-central Vermont. About 90 percent of the area is forested and the remainder is chiefly farm land. The topography reflects the geologic structure and varied resistance of the bedrock to erosion. Most of the area is on the east limb of the Green Mountain anticlinorium, which is the principal structural feature of Vermont. The bedrock is predominantly sedimentary and volcanic rock that has been regionally metamorphosed. It was intruded before metamorphism by mafic and ultramafic igneous rocks, and after metamorphism by felsic and mafic igneous rocks. The metamorphosed sedimentary and volcanic rocks range in age from Cambrian(?) to Middle Silurian, the intrusive igneous rocks from probably Late Ordovician to probably late Permian. Metamorphism and principal folding in the region occurred in Middle Devonian time. The metamorphosed sedimentary and volcanic rocks make up a section at least 25,000 feet thick and can be divided into nine formations. The Hazens Notch formation of Cambrian(?) and Early Cambrian age is characterized by carbonaceous schist. It is succeeded in western parts of the area by the Jay Peak formation of Early Cambrian age, which is chiefly a schist that is distinguished by the general absence of carbonaceous zones; in central parts of the area the Hazens Notch formation is followed by the Belvidere Mountain amphibolite, probably the youngest of the formations of Early Cambrian age. The Ottauquechee formation, composed of carbonaceous phyllite and quartzite, and phyllitic graywacke, is of Middle Cambrian age. The Stowe formation of Late Cambrian(?) and Early(?) Ordovician age overlies the Ottauquechee and is predominantly noncarbonaceous schist, though it also contains greenstone and carbonaceous schist and phyllite. The Umbrella Hill formation of Middle Ordovician age is characteristically a conglomerate in which the mineral chloritoid is common. The overlying Moretown formation, also of Middle Ordovician age, contains granulite and slate, also greenstone and amphibolite of the Coburn Hill volcanic member. The Shaw Mountain formation, made up of conglomerate, phyllite, and limestone, is the oldest Silurian unit. The Shaw Mountain formation is succeeded by the Northfield slate of Middle Silurian age. The igneous rocks of the region include various ultramafic plutonic rocks, such as dunite, peridotite, and serpentinite, probably of Late Ordovician age; sills and nearly concordant dikes of metagabbro of Late Ordovician age; biotite granite plutons or Middle or Late Devonian age, most notably on Eltey Mountain; and hypabyssallamprophyre, probably of late Permian age. Metamorphic zoning is shown by the distribution of rocks of the epidote-amphibolite facies and the greenschist facies in and near the Green Mountains, and near Coburn Hill and Eltey Mountain. Metasomatism related to regional metamorphism has produced porphyroblasts and quartz segregations in the sedimentary and volcanic rocks, and steatitization and carbonatization of serpentinite. Contact metamorphism has formed rocks of the epidote-amphibolite facies near granite plutons, and probably calc-silicate rock at the contacts of ultramafic plutons. The axial anticline of the Green Mountain anticlinorium and other anticlines and synclines to the east are the major longitudinal structural features of the area. These structures are complicated by transverse folds, particularly a syncline in the vicinity of Tillotson Peak. Early minor cross folds that are best developed in the Hazens Notch formation are believed to be genetically related to the transverse folds. The axial planes of the cross folds are folded about the axes of the later longitudinal folds of the Green Mountain anticlinorium. The longitudinal and transverse fold systems probably formed in the same episode of defor

Bulletin↗

USGS1984

Assessment of undiscovered conventionally recoverable petroleum resources of the Northwest European region

The estimates of undiscovered conventionally recoverable petroleum resources in the northwest European region at probability levels of 95 percent, 5 percent, statistical mean, and mode are for oil (in billions of barrels): 9, 34, 20, and 15; and for gas (in trillions of cubic feet): 92, 258, 167, and 162. The occurrence of petroleum can be accounted for in two distinct geological plays located in the various subbasins of the region. Play I is associated with the distribution of mature source rocks of Late Jurassic age relative to four distinct trapping conditions. The play has been demonstrated productive mostly in the Viking and Central Grabens of the North Sea, where the shale has been buried to optimum depths for the generation of both oil and gas. To the north of 62 ? N. latitude up to the Barents Sea, source rocks become increasingly deeply buried and are interpreted to be dominantly gas prone; a narrow band of potentially oil-prone shales tracks most of the coast of Norway, but water depths in favorable localities commonly range from 600 to 1,200 feet. To the south of the Central Graben, the Jurassic source rocks are either immature or minimally productive because of a change in facies. Undrilled traps remain within the favorable source-rock area, and exploration will continue to challenge the boundaries of conventional wisdom, especially on the Norwegian side where little has .been reported on the geology of the adjoining Bergen High or Horda Basin, though, reportedly, the Jurassic source rocks are missing on the high and are immature in the southern part of the basin. Play II is associated with the distribution of a coal facies of Carboniferous age that is mature for the generation of gas and locally underlies favorable reservoir and sealing rocks. The play is limited largely by facies development to the present area of discovery and production but is limited as well to the southeast into onshore Netherlands and Germany by the unfavorable economics of an increasing nitrogen content in the gas. This increase is apparently caused by excessive temperatures associated with increasing depth of burial of the source rock. The history of discovery in the North Sea would appear to deny the commonly held maxim that large fields are found first and early in the exploration process. However, if the discovery data are examined from the perspective of the award date of each exploration license, then it is clear that the largest fields and most of the reserves have indeed been found early in the exploration process of a particular license. Discoveries made within 1 year of granting the license are on average large giants, and they account for slightly less than two-thirds of the original reserves. Discoveries made within 2 to 5 years of the granting of the license are on average less than giant size and smaller than increment-l-year discoveries by a factor of 4; these fields account for a little less than one-third of the reserves. Those fields found 6 or more years after the granting of the license are relatively small and account for 20 percent of all discoveries but only 4 percent of total original reserves. These data suggest that a measure of an area's exploration maturity is the length of time elapsed since the award of the concession.

Circular↗

USGS2007

Detailed measured sections, cross sections, and paleogeographic reconstructions of the upper cretaceous and lower tertiary nonmarine interval, Wind River Basin, Wyoming: Chapter 10 in Petroleum systems and geologic assessment of oil and gas resources in the Wind River Basin Province, Wyoming

Detailed measured sections and regional stratigraphic cross sections are used to reconstruct facies maps and interpret paleogeographic settings for the interval from the base of Upper Cretaceous Mesaverde Formation to top of lower member of the Paleocene Fort Union Formation in the Wind River Basin, Wyoming. The Mesaverde Formation spans the time during which the Upper Cretaceous seaway retreated eastward out of central Wyoming in Campanian time and the initial stages of the Lewis transgression in earliest Maastrichtian time. This retreat stalled for a considerable period of time during deposition of the lower part of the Mesaverde, creating a thick buildup of marginal marine sandstones and coaly coastal plain deposits across the western part of the basin. The Lewis sea transgressed into the northeast part of Wind River Basin, beginning in early Maastrichtian time during deposition of the Teapot Sandstone Member of the Mesaverde Formation. The Meeteetse Formation, which overlies the Teapot, was deposited in a poorly-drained coastal plain setting southwest of the Lewis seaway. The Lewis seaway, at maximum transgression, covered much of the northeast half of the Wind River Basin area but was clearly deflected around the present site of the Wind River Range, southwest of the basin, providing the first direct evidence of Laramide uplift on that range. Uplift of the Wind River Range continued during deposition of the overlying Maastrichtian Lance Formation. The Granite Mountains south of the basin also became a positive feature during this time. A rapidly subsiding trough during the Maastrichtian time formed near the presentday trough of the Wind River Basin in which more than 6,000 feet of Lance was deposited. The development of this trough appears to have begun before the adjacent Owl Creek Mountains to the north started to rise; however, a muddy facies in the upper part of Lance in the deep subsurface, just to the south, might be interpreted to indicate that the Cretaceous Cody Shale was being eroded off a rising Owl Creek Mountains in latest Cretaceous time. The Paleocene Fort Union Formation unconformably overlies older units but with only slight angular discordance around much of the margins of the Wind River Basin. Pre-Fort Union erosion was most pronounced toward the Wind River Range to the southwest, where the Fort Union ultimately overlies strata as old as the upper part of the Cretaceous Cody Shale. The unconformity appears to die out toward the basin center. Coal-forming mires developed throughout the western part of the basin near the beginning of the Paleocene. River systems entering the basin from the Wind River Range to the southwest and the Granite Mountains to the south produced areas of sandy fluvial deposition along mountain fronts. A major river system appears to have entered the basin from about the same spot along the Wind River Range throughout much of the Paleocene, probably because it became incised and could not migrate laterally. The muddy floodplain facies that developed along the deep basin trough during latest Cretaceous time, expanded during the early part of the Paleocene. Coal-forming mires that characterize part of the lower Fort Union Formation reached maximum extent near the beginning of the late Paleocene and just prior to the initial transgression of Lake Waltman. From the time of initial flooding, Lake Waltman expanded rapidly, drowning the coal-forming mires in the central part of the basin and spreading to near basin margins. Outcrop studies along the south margin of the basin document that once maximum transgression was reached, the lake was rapidly pushed basinward and replaced by fluvial environments.

Wyoming↗

USGS2002

Geologic map of the Vail West quadrangle, Eagle County, Colorado

This new 1:24,000-scale geologic map of the Vail West 7.5' quadrangle, as part of the USGS Western Colorado I-70 Corridor Cooperative Geologic Mapping Project, provides new interpretations of the stratigraphy, structure, and geologic hazards in the area on the southwest flank of the Gore Range. Bedrock strata include Miocene tuffaceous sedimentary rocks, Mesozoic and upper Paleozoic sedimentary rocks, and undivided Early(?) Proterozoic metasedimentary and igneous rocks. Tuffaceous rocks are found in fault-tilted blocks. Only small outliers of the Dakota Sandstone, Morrison Formation, Entrada Sandstone, and Chinle Formation exist above the redbeds of the Permian-Pennsylvanian Maroon Formation and Pennsylvanian Minturn Formation, which were derived during erosion of the Ancestral Front Range east of the Gore fault zone. In the southwestern area of the map, the proximal Minturn facies change to distal Eagle Valley Formation and the Eagle Valley Evaporite basin facies. The Jacque Mountain Limestone Member, previously defined as the top of the Minturn Formation, cannot be traced to the facies change to the southwest. Abundant surficial deposits include Pinedale and Bull Lake Tills, periglacial deposits, earth-flow deposits, common diamicton deposits, common Quaternary landslide deposits, and an extensive, possibly late Pliocene landslide deposit. Landscaping has so extensively modified the land surface in the town of Vail that a modified land-surface unit was created to represent the surface unit. Laramide movement renewed activity along the Gore fault zone, producing a series of northwest-trending open anticlines and synclines in Paleozoic and Mesozoic strata, parallel to the trend of the fault zone. Tertiary down-to-the-northeast normal faults are evident and are parallel to similar faults in both the Gore Range and the Blue River valley to the northeast; presumably these are related to extensional deformation that occurred during formation of the northern end of the Rio Grande rift system in Colorado. In the southwestern part of the map area, a diapiric(?) exposure of the Eagle Valley Evaporite exists and chaotic faults and folds suggest extensive dissolution and collapse of overlying bedrock, indicating the presence of a geologic hazard. Quaternary landslides are common and indicate that landslide hazards are widespread in the area, particularly where old slide deposits are disturbed by construction. The late Pliocene(?) landslide that consists largely of a smectitic upper Morrison Formation matrix and boulders of Dakota Sandstone is readily reactivated. Debris flows are likely to invade low-standing areas within the towns of Vail and West Vail where tributaries of Gore Creek issue from the mountains on the north side of the valley.

Miscellaneous Field Studies Map↗

USGS2006

Geologic map of the Kings Mountain and Grover quadrangles, Cleveland and Gaston Counties, North Carolina, and Cherokee and York Counties, South Carolina

This geologic map of the Kings Mountain and Grover 7.5-minute quadrangles, N.C.-S.C., straddles a regional geological boundary between the Inner Piedmont and Carolina terranes. The Kings Mountain sequence (informal name) on the western flank of the Carolina terrane in this area includes the Neoproterozoic Battleground and Blacksburg Formations. The Battleground Formation has a lower part consisting of metavolcanic rocks and interlayered schist, and an upper part consisting of quartz-sericite phyllite and schist interlayered with quartz-pebble metaconglomerate, aluminous quartzite, micaceous quartzite, manganiferous rock, and metavolcanic rocks. The Blacksburg Formation consists of phyllitic metasiltstone interlayered with thinner units of marble, laminated micaceous quartzite, hornblende gneiss, and amphibolite. Layered metamorphic rocks of the Inner Piedmont terrane include muscovite-biotite gneiss, muscovite schist, and amphibolite. The Kings Mountain sequence has been intruded by metatonalite and metatrondhjemite (Neoproterozoic), metadiorite and metagabbro (Paleozoic), and High Shoals Granite (Pennsylvanian). Layered metamorphic rocks of the Inner Piedmont in this area have been intruded by Toluca Granite (Ordovician?), Cherryville Granite and associated pegmatite (Mississippian), and spodumene pegmatite (Mississippian). Diabase dikes (early Jurassic) are locally present throughout the area. Ductile fault zones of regional scale include the Kings Mountain and Kings Creek shear zones. In this area, the Kings Mountain shear zone forms the boundary between the Inner Piedmont and Carolina terranes, and the Kings Creek shear zone separates the Battleground Formation from the Blacksburg Formation. Structural styles change across the Kings Mountain shear zone from steeply-dipping layers, foliations, and folds on the southeast to gently- and moderately-dipping layers, foliations, and recumbent folds on the northwest. Mineral assemblages in the Kings Mountain sequence show a westward decrease from upper amphibolite facies (sillimanite zone) near the High Shoals Granite on the east side of the map to greenschist (epidote-amphibolite) facies in the south-central part of the area near the Kings Mountain shear zone. Amphibolite-facies mineral assemblages in the Inner Piedmont terrane increase in grade from the kyanite zone near the Kings Mountain shear zone to the sillimanite zone in the northwest part of the map. Surficial deposits include alluvium in the stream valleys and colluvium along ridges and steep slopes. These quadrangles are unusual in their richness and variety of mineral deposits, which include spodumene (lithium), cassiterite (tin), mica, feldspar, silica, clay, marble, kyanite and sillimanite, barite, manganese, sand and gravel, gold, pyrite, and iron. (Abstract from pamphlet.)

Open-File Report↗

USGS2009

Quaternary Geologic Framework of the St. Clair River between Michigan and Ontario, Canada

Concern about the effect of geomorphic changes in the St. Clair River on water levels in the Upper Great Lakes resulted in the need for information on the geologic framework of the river. A geophysical survey of the Upper St. Clair River between Port Huron, MI, and Sarnia, Ontario, Canada, was conducted to determine the Quaternary geologic framework of the region. Previously available and new sediment samples and photographic and video data support the interpretation of the seismic stratigraphy and surficial geology. Three seismic stratigraphic units and two unconformities were identified. Glacial drift, consisting of interbedded till and glaciolacustrine deposits, overlies shale. Glaciofluvial and modern fluvial processes have eroded the glacial drift. Glaciofluvial, glaciolacustrine, fluvial, and lacustrine deposits overlie this unconformity. Seismic facies were interpreted to identify areas where these geologic facies exist; however, in the absence of distinct boundaries between facies, these deposits were mapped as one undifferentiated unit. This unit is thickest in the northernmost 3 kilometers of the river, where it consists of relatively coarse-grained fluvial, reworked glaciofluvial, and possibly glaciofluvial deposits. To the south, this coarse-grained unit thins or is absent. The undifferentiated unit comprises most of the surficial deposits in the northernmost river area. Some areas of glacial drift, predominantly till, are exposed at the lake and riverbed. The shale is not exposed anywhere in the region. Geophysical surveys at sites downriver, together with the results of previous studies, indicate that the geologic framework is similar to that in the northernmost river area except for the absence or reduced thickness of the coarse-grained fluvial deposits. Instead, glacial drift is exposed at the riverbed or is covered by a veneer of sediment. This information on the substrate is important for ongoing sediment transport studies.

Open-File Report↗

USGS1961

Geology of uranium in the Chadron area, Nebraska and South Dakota

The Chadron area covers 375 square miles about 25 miles southeast of the Black Hills. Recurrent mild tectonic activity and erosion on the Chadron arch, a compound anticlinal uplift of regional extent, exposed 1900 feet of Upper Cretaceous rocks, mostly marine shale containing pyrite and organic matter, and 600 feet of Oligocene and Miocene rocks, mostly terrestrial fine-grained sediment containing volcanic ash. Each Cretaceous formation truncated by the sub-Oligocene unconformity is stained yellow and red, leached, kaolinized, and otherwise altered to depths as great as 55 feet. The composition and profile of the altered material indicate lateritic soil; indirect evidence indicates Eocene(?) age. In a belt through the central part of the area, the Brule formation of Oligocene age is a sequence of bedded gypsum, clay, dolomite, and limestone more than 300 feet thick. Uranium in Cretaceous shale in 58 samples averages 0.002 percent, ten times the average for the earths crust. Association with pyrite and organic matter indicates low valency. The uranium probably is syngenetic or nearly so. Uranium in Eocene(?) soil in 43 samples averages 0.054 percent, ranging up to 1.12 percent. The upper part of the soil is depleted in uranium; enriched masses in the basal part of the soil consist of remnants of bedrock shale and are restricted to the highest reaches of the ancient oxidation-reduction interface. The uranium is probably in the from of a low-valent mineral, perhaps uraninite. Modern weathering of Cretaceous shale is capable of releasing as much as 0.780 ppm uranium to water. Eocene(?) weathering probably caused enrichment of the ancient soil through 1) leaching of Cretaceous shale, 2) downward migration of uranyl complex ions, and 3) reduction of hydrogen sulfide at the water table. Uranium minerals occur in the basal 25 feet of the gypsum facies of the Brule formation at the two localities where the gypsum is carbonaceous; 16 samples average 0.066 percent uranium and range up to 0.43 percent. Elsewhere uranium in dolomite and limestone in the basal 25 feet of the gypsum facies in 10 samples averages 0.007 percent, ranging up to 0.12 percent. Localization of the uranium at the base of the gypsum facies suggests downward moving waters; indirect evidence that the water from which the gypsum was deposited was highly alkaline suggests that the uranium was leached from volcanic ash in Oligocene time.

Open-File Report↗

USGS1970

Economic geology of the Zipaquira quadrangle and adjoining area, Department of Cundinamarca, Colombia

At least four evaporite sequences are interbedded with Cretaceous strata in the Bogotga area of the Cordillera Oriental of Colombia. The easternmost and oldest evaporite interval is of probable Berriasian-Valanglnian age; the next oldest is of probable late Barremian-early Aptian age, and is followed by a possible late Aptian sequence. The westernmost and best known sequence is Turonian-early Coniacian in age, in the Sabana de Bogota. This youngest sequence contains the thickest known salt deposits and is probably the most widespread geographically. Three gypsum deposits of probable Barremian-Valanginian age are in the eastern part of the area under investigation. These deposits may have been leached from former salt accumulations. No other evaporites are exposed, but numerous brine springs are known, That the sources of these brines are neither deep not distant is suggested by the generally high concentrations, of the brines, the local presence of rute (leached salt residue), and the commonly significant amounts of H2S gas emitted at these springs. The rock salt exposed in three accessible mines commonly has a characteristic lamination caused by alternating layers of relatively pure halite and very argillaceous halite. Ubiquitously scattered throughout all salt deposits are small clasts of black, commonly pyritic, marly claystone. This lithology is also present as large claystone bodies conformably interbedded in the salt strata. Anhydrite is rare and is apparently more abundant at the Zipaquira mine that at the Nemocon and Upin mine. Paleontologic evidence in the Sabana de Bogota demonstrates that the salt-claystone series, hematite impregnated strata, and carbonaceous to locally coaly claystone are coeval. The salt-claystone facies may have been deposited in shallow evaporite pans that were separated within the overall evaporite interval by barriers on which the locally hematitic strata were deposited. The carbonaceous facies may also have formed in barrier areas or on the edges of the evaporite basins. Whether or not this facies relationship prevails in the older evaporite intervals is not known; meager evidence suggests that it does. Nonmetallic mineral resources other than the evaporite minerals are phosphate rock, limestone, kaolinite, and emeralds. Metallic mineral deposits present in the Zone include hematite at Pericos, La Caldera, Tibirita, Nueva Vizcaya, and Cerro de Montecristo; chalcopyrite at Cerro do Cobre and at Farallones de Medina; galena in several places along the Rio Farallones and Rio Gacheta; and spahlerite in the Junin district.

Open-File Report↗

USGS1977

Surficial and applied surficial geology of the Belchertown Quadrangle, Massachusetts

Till and stratified drift overlie maturely dissected topography in the Belchertown quadrangle, an area that straddles the New England Upland and Connecticut Valley Lowland in central Massachusetts. Lower Paleozoic, massive quartzo-feldspathic gneiss, quartzite and schist of the Pelham dome and Devonian granodiorite and quartz diorite of the Belchertown intrusive complex are in contact with Triassic arkosic fanglomerate and basalt along a lengthy normal fault separating the New England Upland from the Connecticut Valley Lowland. The orientation of striae, roches moutonnees, and streamline ridges indicate that the last Wisconsinian glacier advanced generally south 12? east. This glacier removed several meters of rock from the upland and an unknown larger quantity from the preglacial valley of the Connecticut River. Till is thin in the uplands, but several tens of feet of drift overlie bedrock in the lowland. Three lithic facies of sandy, clast-rich, non-compact, subarkosic till derived from the three major source rocks rest on bedrock or on highly weathered, compact, clast-poor, fissile probably older till. The mean for all upper till is 69.6% sand, 21.7% silt, and 8.8% clay; lower till consists of 48% sand, 23% silt and 29% clay. Mud-rich, compact, sparsely stony till in drumlins in and along the flank of the Connecticut Valley Lowland is composed of 51.5% sand, 28% silt, and 20.5% clay. Upper tills are facies equivalent deposits of the youngest Wisconsinian drift. Lower till is compact deeply weathered, jointed and stained suggesting it is correlative with other lower till in New England deposited by an earlier Wisconsinian glacier. Drumlin till may be a facies equivalent of a lower till or a mud-rich upper till derived from earlier glaciolacustrine deposits. Upper and lower till of the Belchertown quadrangle is texturally similar to other New England upper and lower tills to which they are equivalent. Both tills are interpreted as lodgment till derived from similar bedrock terrane by two different glaciers. The older glacier incorporated mud-rich saprolite producing a fine grained till, while the younger glacier eroded fresh bedrock or a thin regolith produced by mechanical weathering. During stagnation zone retreat of the last glacier, stratified drift was deposited by melt water in, on, alongside or down valley from stagnant ice. The absence of stratified drift along upland divides indicates that stagnation did not begin till large nunataks were emergent. Kame terraces, kame deltas, and ice channel fillings indicate that melt water flowed along stagnant ice and emptied into temporary proglacial lakes. As downwasting progressed, water was able to drain at lower elevation into expanding lakes, the last of which merged with northward-expanding proglacial Lake Hitchcock in the Connecticut Valley. Initial melt water drainage to the southeast was followed by drainage to the southwest to the ancestral Chicopee River. With the opening of the Narrows, Lake Hitchcock expanded northward and eastward to form the Amherst embayment into which melt water from the eastern uplands drained. Sand and gravel overlying varves in the Amherst embayment was deposited in late-glacial Lake Lawrence, which coalesced with equivalent Lake Hadley through cols between drumlins in the Connecticut Valley Lowland. Deglaciation of the Belchertown quadrangle probably occurred in a span of about 100 years in the interval 12,000 to 12,500 years B.P. Unconsolidated sediments of the Belchertown quadrangle are summarized as to their geologic and geotechnical properties for land use planning. Drift as it influences groundwater flow, yield, and quality and as a construction material is assessed. Some environmental degradation has occurred from the indiscriminant disposal of liquid and solid waste as well as injudicious use of road salt.

Open-File Report↗

USGS1980

Intrusions and intrusive complexes in an ophiolite near San Luis Obispo; a chemical and petrologic study

The San Luis Obispo ophiolite is a sequence of mafic and ultramafic rocks that lie as a thrust-like slice on top of Franciscan melange in the southern California Coast Range. The ophiolite comprises the classic Steinmann Trinity of basal serpentinized ultramafic rocks overlain sequentially by spilitized pillow lavas and cherts. The ophiolite is intruded by numerous diabasic dikes and several large intrusive complexes that contain peridotite, gabbro, diabase and felsic rocks. Field relations indicate that this ophiolite originated as a sequence of submarine volcanic flows and breccia units extruded onto an ultramafic basement. Later the volcanic and ultramafic rocks were intruded along their contact by mafic magma that crystallized as a stratiform complex of cumulate peridotite and gabbro. Next, this stratiform complex was intruded by diorite and albite-granite (trondhjemite) sills, which may have been produced by partial melting of gabbros in the upper levels of the stratiform complex. Finally all earlier units were intruded by diabasic sills and dikes that probably were late feeders for the pre-existing volcanic unit. All the ophiolite rocks underwent subsequent highly localized brecciation, under greenschist-facies conditions, in which felsic rocks were incipiently melted by frictional heating. The host rocks and intrusions were metamorphosed at low temperature and the mafic rocks were altered by Na- and Si-metasomatism. Despite this pervasive alteration, evidences of the formational stages of the ophiolite are preserved in disequilibrium mineral assemblages, primarily within mafic and ultramafic rocks of the intrusive complexes. Whole-rock analyses of the ophiolite suite indicate that alteration has obscured but not obliterated the original chemical character of the mafic rocks. The ophiolite diabases and basalts contain up to 6 weight percent Na 2 0 and 58 percent Si0 2 , in contrast to normal Si0 2 contents of 50 percent or less and Na 2 0 contents of less than 3 percent for unaltered oceanic and continental tholeiite basalts. However, the low K 2 0 contents (less than 0.8 percent) of all units in the ophiolite suite indicate that these rocks are not part of an alkalic kindred, but rather are altered tholeiites. Compositions of relict amphibole and plagioclase in the mafic rocks indicate that the ophiolite formed in a high-temperature environment and the deep seated rocks were metamorphosed under amphibolite-facies conditions. A later change in the environmental conditions allowed subsequent low-temperature (greenschist facies) metamorphism and metasomatism. The structure and chemistry of the San Luis Obispo ophiolite support the hypothesis that this body may represent a fragment of oceanic crust and mantle. The volcanic rocks and the intrusive complexes probably formed at a mid-ocean ridge, where conditions of high heat-flow provided the requisite high-temperature environment and promoted the production of mafic magmas. The change to low-temperature conditions probably was due to inception or acceleration of crustal spreading at that portion of the ridge where this ophiolite formed. The nature of brecciation in the ophiolite indicates that the low-temperature environment also was one of greater tectonic disturbance, relative to conditions at the ridge. This tectonically active environment probably corresponds to an island arc where the ophiolite-bearing plate was subducted in an adjacent trench. The absence of a high-pressure mineral assemblage in the San Luis Obispo ophiolite suggests that this segment of ocean-crust and upper mantle was not buried in a subduction zone, but rather was rafted on top of subduction melange (Franciscan Formation) into its present position.

California↗