SEARCH · Search USGS

Results for “The Moon”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16Linked to original sources

USGS1975

Compositional evidence regarding the influx of interplanetary materials onto the lunar surface

Siderophilic element/Ir ratios are higher in mature lunar soils from highlands sites than in those from mare sites. We infer that the population of materials responsible for the early intense bombardment of the Moon had high ratios, and that the population responsible for the essentially constant flux has low ratios. No group of chondrites has siderophile/Ir ratios identical to those in the mare or highlands soils; CM chondrites are the most similar, and CM-like materials may account for a major fraction of Earth-crossing materials during the past 3.7 b.y. Siderophile/Ir ratios may be used to determine the amount of highlands regolith in soils or breccias from the mare-highlands interface areas (Apollo 15 and 17), and to infer the time of formation of highlands breccias whose sideropbiles originated in mature soils. Arguments are summarized against the viewpoint that the siderophiles in most highlands breccias originated in basin-forming projectiles. Differences in mature soil siderophile concentrations at Apollo 14 and 16 indicate a substantially greater concentration at the latter site immediately following the Imbrium event. Siderophile concentrations are used to estimate mean regolith depths at the landing sites; as relative values these are more precise than estimates based on seismic or crater observations. The longlived flux is calculated to be 2.9 g cm −2 b.y. −1 averaged over the past 3.7 b.y. A consideration of the relationship between mass fluence and time indicates that the mass flux decreased with a half-life of about 40 m.y. immediately following the Imbrium event.

The Moon↗

USGS1977

A digital file of the lunar normal Albedo

A digital file of the normal albedo of the Moon has been produced at a resolution of about 1/550 of a lunar diameter (about 6.3 km). The file was produced from five photographs taken with the 61-cm reflector of the Northern Arizona University Astrophysical Observatory. No mosaicking was necessary. Spatial control is selenodetic rather than landmark-morphologic. Photometric control is provided through a combination of electrography and regular photoelectric photometry. Pixel photometric function corrections are employed. The file was provided as data base for the Lunar Consortium. Brief discussion of the scientific implications of the frequency histogram is offered, and the negligibility of lunar limb darkening below e{open} = 77?? is affirmed. It is specifically desired not to withhold these data from publication while more significant and detailed scientific interpretation is carried on. ?? 1977 D. Reidel Publishing Company, Dordrecht-Holland.

The Moon↗

USGS1981

Ridges and scarps in the equatorial belt of Mars

The morphology and distribution of ridges and scarps on Mars in the ± 30° latitude belt were investigated. Two distinct types of ridges were recognized. The first is long and linear, resembling mare ridges on the Moon; it occurs mostly in plains areas. The other is composed of short, anastomosing segments and occurs mostly in ancient cratered terrain and intervening plateaus. Where ridges are eroded, landscape configurations suggest that they are located along regional structures. The age of ridges is uncertain, but some are as young as the latest documented volcanic activity on Mars. The origins of ridges are probably diverse-they may result from wrinkling due to compression or from buckling due to settling over subsurface structures. The similar morphologic expressions of ridge types of various origins may be related to a similar deformation mechanism caused by two main factors: (1) most ridges are developed in thick layers of competent material and (2) ridges formed under stresses near a free surface.

The Moon and the Planets↗

USGS1975

Lava flows in mare imbrium: An evaluation of anomalously low earth-based radar reflectivity

The lunar maria reflect two to five times less Earth-based radar power than the highlands, the spectrally blue maria surfaces returning the lowest power levels. This effect of weakening signal return has been attributed to increased signal absorption related to the electrical and magnetic characteristics of the mineral ilmenite (FeTiO 3 ). The surface of Mare Imbrium contains some of the most distinct red-blue colorimetric boundaries and depolarized 70 cm wavelength reflectivity variations on the near side of the Moon. The weakest levels of both 3.8 cm and 70 cm reflectivity within Imbrium are confined to regional mare surfaces of the blue spectral type that can be recognized as stratigraphically unique flow surfaces. Frequency distributions of the 70 cm polarized and depolarized radar return power for five mare surfaces within the basin indicate that signal absorption, and probably the ilmenite content, increases generally from the beginning of the Imbrian Period to the end of the Eratosthenian Period with slight reversal between the end of the Imbrian and beginning of the Eratosthenian. TiO 2 calibrated radar reflectivity curves can be utilized for lunar maria geochemical mapping in the same manner as the TiO 2 calibrated spectral reflectivity curves of Charette et al. (1974). The long wavelength radar data may be a sensitive indicator of mare chemical variations as it is unaffected by the normal surface rock clutter that includes ray materials from large impact craters.

The Moon↗

USGS2025

Texas coastal wetland surface elevation static survey campaign report

Surface elevation data along the Texas Coast is limited, despite having some of the highest rates of relative sea-level rise in the country (Sweet et al., 2022). To narrow these knowledge and data gaps, the U.S. Fish and Wildlife Service (USFWS) established the first landscape-scale rod surface elevation table (RSET) monitoring project aimed at examining surface elevation dynamics of coastal marshes in Texas (Moon et al., 2022). The project, conducted cooperatively between the USFWS and the U.S. Geological Survey (USGS), has focused on 14 coastal marsh sites located within five National Wildlife Refuges (Figure 1). The main objective of this project’s RSET data collection is to quantify the impacts of sea-level rise on coastal properties owned by the USFWS and similar surrounding areas. Data from RSETs will be used to determine areas that are at the greatest risk for potential habitat loss and degradation by examining subsidence and accretion rates. However, for the RSET data to be tied into the national vertical datum of 1988 (NAVD88) and, therefore, linked to the relative sea-level change calculations, it is necessary to establish primary vertical control at each study site through highly accurate and precise global navigation satellite systems (GNSS) surveys. Having a clear methodology for standardization is important for quality data. This report focuses on the methods, with particular emphasis on post-processing, used to survey benchmarks for the RSET data collection along the Texas Coast for the USFWS. Furthermore, this report serves as a general reference guide on the technical aspects of performing and processing GNSS surveys within the Texas coastal refuges to maintain quality and consistency.

Texas↗

USGS2014

Volcanic glass signatures in spectroscopic survey of newly proposed lunar pyroclastic deposits

Moon Mineralogy Mapper spectroscopic observations are used to assess the mineralogy of five sites that have recently been proposed to include lunar dark mantle deposits (DMDs). Volcanic glasses have, for the first time, clearly been identified at the location of three of the proposed pyroclastic deposits. This is the first time that volcanic glasses have been identified at such a small scale on the lunar surface from remote sensing observations. Deposits at Birt E, Schluter, and Walther A appear to be glassy DMDs. Deposits at Birt E and Schluter show (1) morphological evidence suggesting a likely vent and (2) mineralogical evidence indicative of the presence of volcanic glasses. The Walther A deposits, although they show no morphological evidence of vents, have the spectroscopic characteristics diagnostic of volcanic glasses. The deposits of the Freundlich-Sharonov basin are separated in two areas: (1) the Buys-Ballot deposits lack mineralogical and morphological evidence and thus are found to be associated with mare volcanism not with DMDs and (2) the Anderson crater deposits, which do not exhibit glassy DMD signatures, but they appear to be associated with possible vent structures and so may be classifiable as DMDs. Finally, dark deposits near the crater Kopff are found to be associated with likely mare volcanism and not associated with DMDs. The spectral identification of volcanic glass seen in many of the potential DMDs is a strong indicator of their pyroclastic origin.

Journal of Geophysical Research E: Planets↗

USGS2015

Examining spectral variations in localized lunar dark mantle deposits

The localized lunar dark mantle deposits (DMDs) in Alphonsus, J. Herschel, and Oppenheimer craters were analyzed using visible-near-infrared spectroscopy data from the Moon Mineralogy Mapper. Spectra of these localized DMDs were analyzed for compositional and mineralogical variations within the deposits and were compared with nearby mare basalt units. Spectra of the three localized DMDs exhibited mafic absorption features indicating iron-rich compositions, although the DMDs were spectrally distinct from nearby mare basalts. All of the DMDs contained spectral signatures of glassy materials, suggesting the presence of volcanic glass in varying concentrations across the individual deposits. In addition, the albedo and spectral signatures were variable within the Alphonsus and Oppenheimer crater DMDs, suggesting variable deposit thickness and/or variations in the amount of mixing with the local substrate. Two previously unidentified localized DMDs were discovered to the northeast of Oppenheimer crater. The identification of high concentrations of volcanic glass in multiple localized DMDs in different locations suggests that the distribution of volcanic glass across the lunar surface is much more widespread than has been previously documented. The presence of volcanic glass implies an explosive, vulcanian eruption style for localized DMDs, as this allows volcanic glass to rapidly quench, inhibiting crystallization, compared to the larger hawaiian-style eruptions typical of regional DMD emplacement where black beads indicate a higher degree of crystallization. Improved understanding of the local and global distributions of volcanic glass in lunar DMDs will further constrain lunar degassing and compositional evolution throughout lunar volcanic history.

Journal of Geophysical Research E: Planets↗

USGS2018

Morphological indicators of a mascon beneath Ceres' largest crater, Kerwan

Gravity data of Ceres returned by the National Aeronautics and Space Administration's Dawn spacecraft is consistent with a lower density crust of variable thickness overlying a higher density mantle. Crustal thickness variations can affect the long‐term, postimpact modification of impact craters on Ceres. Here we show that the unusual morphology of the 280 km diameter crater Kerwan may result from viscous relaxation in an outer layer that thins substantially beneath the crater floor. We propose that such a structure is consistent with either impact‐induced uplift of the high‐density mantle beneath the crater or from volatile loss during the impact event. In either case, the subsurface structure inferred from the crater morphology is superisostatic, and the mass excess would result in a positive Bouguer anomaly beneath the crater, consistent with the highest‐degree gravity data from Dawn. Ceres joins the Moon, Mars, and Mercury in having basin‐associated gravity anomalies, although their origin may differ substantially.

Geophysical Research Letters↗

USGS2024

A fine-scale examination of parturition timing in temperate ungulates

Parturition timing has long been a topic of interest in ungulate research. However, few studies have examined parturition timing at fine scale (e.g., <1 day). Predator activity and environmental conditions can vary considerably with diel timing, which may result in selective pressure for parturition to occur during diel times that maximize the likelihood of neonate survival. We monitored parturition events and early-life survival of elk ( Cervus canadensis ) and mule deer ( Odocoileus hemionus ) in Utah, USA to better understand diel timing of parturition in temperate ungulates. Diel timing of parturition was moderately synchronous among conspecifics and influenced by environmental variables on the date of parturition. For elk, parturition events were most common during the morning crepuscular period and generally occurred later (i.e., closer to 12:00) when a relatively large proportion of the moon was illuminated. For mule deer, parturition events were most common during the diurnal period and generally occurred later (i.e., closer to 15:00) on cold, wet dates. Diel timing of parturition did not influence neonate survival, but larger datasets may be required to verify the apparent lack of influence. Although additional work could evaluate alternative variables that might affect parturition timing, our data provide an improved and finer scale understanding of reproductive ecology and phenology in ungulates.

Utah↗

USGS2018

Effects of environmental variables on invasive amphibian activity: Using model selection on quantiles for counts

Many different factors influence animal activity. Often, the value of an environmental variable may influence significantly the upper or lower tails of the activity distribution. For describing relationships with heterogeneous boundaries, quantile regressions predict a quantile of the conditional distribution of the dependent variable. A quantile count model extends linear quantile regression methods to discrete response variables, and is useful if activity is quantified by trapping, where there may be many tied (equal) values in the activity distribution, over a small range of discrete values. Additionally, different environmental variables in combination may have synergistic or antagonistic effects on activity, so examining their effects together, in a modeling framework, is a useful approach. Thus, model selection on quantile counts can be used to determine the relative importance of different variables in determining activity, across the entire distribution of capture results. We conducted model selection on quantile count models to describe the factors affecting activity (numbers of captures) of cane toads ( Rhinella marina ) in response to several environmental variables (humidity, temperature, rainfall, wind speed, and moon luminosity) over eleven months of trapping. Environmental effects on activity are understudied in this pest animal. In the dry season, model selection on quantile count models suggested that rainfall positively affected activity, especially near the lower tails of the activity distribution. In the wet season, wind speed limited activity near the maximum of the distribution, while minimum activity increased with minimum temperature. This statistical methodology allowed us to explore, in depth, how environmental factors influenced activity across the entire distribution, and is applicable to any survey or trapping regime, in which environmental variables affect activity.

Ecosphere↗

USGS1994

Galileo Photometry of Asteroid 951 Gaspra

Galileo images of Gaspra make it possible for the first time to determine a main-belt asteroid's photometric properties accurately by providing surface-resolved coverage over a wide range of incidence and emission angles and by extending the phase angle coverage to phases not observable from Earth. We combine Earth-based telescopic photometry over phase angles 2° ≤ α ≤ 25° with Galileo whole-disk and disk-resolved data at 33° ≤ α ≤ 51° to derive average global photometric properties in terms of Hapke's photometric model. The microscopic texture and particle phase-function behavior of Gaspra's surface are remarkably like those of other airless rocky bodies such as the Moon. The macroscopic surface roughness parameter, θ̄ = 29°, is slightly larger than that reported for typical lunar materials. The particle single scattering albedo, ώ 0 = 0.36 ± 0.07, is significantly larger than for lunar materials, and the opposition surge amplitude, B 0 = 1.63 ± 0.07, is correspondingly smaller. We determine a visual geometric albedo p v = 0.22 ± 0.06 for Gaspra, in close agreement with p v = 0.22 ± 0.03 estimated from Earth-based observations. Gaspra's phase integral is 0.47, and the bolometric Bond albedo is estimated to be 0.12 ± 0.03. An albedo map derived by correcting Galileo images with our average global photometric function reveals subdued albedo contrasts of ±10% or less over Gaspra's northern hemisphere. Several independent classification algorithms confirm the subtle spectral heterogeneity reported earlier (S. Mottola, M. DiMartino, M. Gonano-Beurer, H. Hoffman, and G. Neukum, 1993, Asteroids, Comets, Meteors, pp. 421-424; M. J. S. Belton et al ., 1992, Science 257, 1647-1652). Whole-disk colors (0.41 ≤ λ ≤ 0.99 μm) vary systematically with longitude by about ±5%, but color differences as large as 30% occur locally. Colors vary continuously between end-member materials whose areal distribution correlates with regional topography. Infrared: violet (0.99:0.41-μm) color ratios on Gaspra are strongly correlated with local elevation, being largest at lower elevations and smaller at higher elevations. No correlation was detected between elevation and the green:violet (0.56:0.41-μm) color ratio. Bright materials with a strong 1-μm absorption occur primarily in association with craters along ridges, while darker materials with 30% weaker 1-μm signatures occur downslope. The variations of color and albedo cannot be easily explained by grain-size effects alone or by differences in photometric geometry. The trends observed are consistent with those revealed by laboratory studies of the effects of comminution, glass formation, and segregation of metal from silicate components in chondritic meteorites and also in some silicate mixtures. The relative importance of these various processes on Gaspra remains to be determined.

Icarus↗

USGS2023

The composition of Io

Io is unlike any other body in the Solar System making questions about its chemical composition especially interesting and challenging. This chapter examines the many different, but frustratingly indirect, constraints we have on the bulk composition of this restless moon. A detailed consideration of Io’s lavas is used to illustrate how decades of research have bounded, but not pinned down, the chemistry of Io. A self-consistent model for the core, mantle and crust is constructed based on a conventional chondritic composition but exotic alternatives cannot be ruled out. The study of Io’s composition should provide a fertile and exciting realm for future scientists.

Book chapter↗

USGS1992

The Galileo Solid-State Imaging experiment

The Solid State Imaging (SSI) experiment on the Galileo Orbiter spacecraft utilizes a high-resolution (1500 mm focal length) television camera with an 800 ?? 800 pixel virtual-phase, charge-coupled detector. It is designed to return images of Jupiter and its satellites that are characterized by a combination of sensitivity levels, spatial resolution, geometric fiedelity, and spectral range unmatched by imaging data obtained previously. The spectral range extends from approximately 375 to 1100 nm and only in the near ultra-violet region (??? 350 nm) is the spectral coverage reduced from previous missions. The camera is approximately 100 times more sensitive than those used in the Voyager mission, and, because of the nature of the satellite encounters, will produce images with approximately 100 times the ground resolution (i.e., ??? 50 m lp-1) on the Galilean satellites. We describe aspects of the detector including its sensitivity to energetic particle radiation and how the requirements for a large full-well capacity and long-term stability in operating voltages led to the choice of the virtual phase chip. The F/8.5 camera system can reach point sources of V(mag) ??? 11 with S/N ??? 10 and extended sources with surface brightness as low as 20 kR in its highest gain state and longest exposure mode. We describe the performance of the system as determined by ground calibration and the improvements that have been made to the telescope (same basic catadioptric design that was used in Mariner 10 and the Voyager high-resolution cameras) to reduce the scattered light reaching the detector. The images are linearly digitized 8-bits deep and, after flat-fielding, are cosmetically clean. Information 'preserving' and 'non-preserving' on-board data compression capabilities are outlined. A special "summation" mode, designed for use deep in the Jovian radiation belts, near Io, is also described. The detector is 'preflashed' before each exposure to ensure the photometric linearity. The dynamic range is spread over 3 gain states and an exposure range from 4.17 ms to 51.2 s. A low-level of radial, third-order, geometric distortion has been measured in the raw images that is entirely due to the optical design. The distortion is of the pincushion type and amounts to about 1.2 pixels in the corners of the images. It is expected to be very stable. We discuss the measurement objectives of the SSI experiment in the Jupiter system and emphasize their relationships to those of other experiments in the Galileo project. We outline objectives for Jupiter atmospheric science, noting the relationship of SSI data to that to be returned by experiments on the atmospheric entry Probe. We also outline SSI objectives for satellite surfaces, ring structure, and 'darkside' (e.g., aurorae, lightning, etc.) experiments. Proposed cruise measurement objectives that relate to encounters at Venus, Moon, Earth, Gaspra, and, possibly, Ida are also briefly outlined. The article concludes with a description of a 'fully distributed' data analysis system (HIIPS) that SSI team members intend to use at their home institutions. We also list the nature of systematic data products that will become available to the scientific community. Finally, we append a short 'historical' note outlining the responsibilities and roles of institutions and individuals that have been involved in the 14 year development of the SSI experiment so far. ?? 1992 Kluwer Academic Publishers.

Space Science Reviews↗

USGS1981

A routine high-precision method for Lu-Hf isotope geochemistry and chronology

A method for chemical separation of Lu and Hf from rock, meteorite and mineral samples is described, together with a much improved mass spectrometric running technique for Hf. This allows (i) geo- and cosmochronology using the176Lu???176Hf+??- decay scheme, and (ii) geochemical studies of planetary processes in the earth and moon. Chemical yields for the three-stage ion-exchange column procedure average 90% for Hf. Chemical blanks are <0.2 ng for Lu and Hf. From 1 ??g of Hf, a total ion current of 0.5??10-11 Ampere can be maintained for 3-5 h, yielding 0.01-0.03% precision on the ratio176Hf/177Hf. Normalisation to179Hf/177Hf=0.7325 is used. Extensive results for the Johnson Matthey Hf standard JMC 475 are presented, and this sample is urged as an international mass spectrometric standard; suitable aliquots, prepared from a single batch of JMC 475, are available from Denver. Lu-Hf analyses of the standard rocks BCR-1 and JB-1 are given. The potential of the Lu-Hf method in isotope geochemistry is assessed. ?? 1980 Springer-Verlag.

Contributions to Mineralogy and Petrology↗

USGS2007

Report of the IAU/IAG Working Group on cartographic coordinates and rotational elements: 2006

Every three years the IAU/IAG Working Group on Cartographic Coordinates and Rotational Elements revises tables giving the directions of the poles of rotation and the prime meridians of the planets, satellites, minor planets, and comets. This report introduces improved values for the pole and rotation rate of Pluto, Charon, and Phoebe, the pole of Jupiter, the sizes and shapes of Saturn satellites and Charon, and the poles, rotation rates, and sizes of some minor planets and comets. A high precision realization for the pole and rotation rate of the Moon is provided. The expression for the Sun's rotation has been changed to be consistent with the planets and to account for light travel time ?? 2007 Springer Science+Business Media B.V.

Celestial Mechanics and Dynamical Astronomy↗

USGS2010

Report of the IAU Working Group on cartographic coordinates and rotational elements: 2009

Every three years the IAU Working Group on Cartographic Coordinates and Rotational Elements revises tables giving the directions of the poles of rotation and the prime meridians of the planets, satellites, minor planets, and comets. This report takes into account the IAU Working Group for Planetary System Nomenclature (WGPSN) and the IAU Committee on Small Body Nomenclature (CSBN) definition of dwarf planets, introduces improved values for the pole and rotation rate of Mercury, returns the rotation rate of Jupiter to a previous value, introduces improved values for the rotation of five satellites of Saturn, and adds the equatorial radius of the Sun for comparison. It also adds or updates size and shape information for the Earth, Mars’ satellites Deimos and Phobos, the four Galilean satellites of Jupiter, and 22 satellites of Saturn. Pole, rotation, and size information has been added for the asteroids (21) Lutetia, (511) Davida, and (2867) Šteins. Pole and rotation information has been added for (2) Pallas and (21) Lutetia. Pole and rotation and mean radius information has been added for (1) Ceres. Pole information has been updated for (4) Vesta. The high precision realization for the pole and rotation rate of the Moon is updated. Alternative orientation models for Mars, Jupiter, and Saturn are noted. The Working Group also reaffirms that once an observable feature at a defined longitude is chosen, a longitude definition origin should not change except under unusual circumstances. It is also noted that alternative coordinate systems may exist for various (e.g. dynamical) purposes, but specific cartographic coordinate system information continues to be recommended for each body. The Working Group elaborates on its purpose, and also announces its plans to occasionally provide limited updates to its recommendations via its website, in order to address community needs for some updates more often than every 3 years. Brief recommendations are also made to the general planetary community regarding the need for controlled products, and improved or consensus rotation models for Mars, Jupiter, and Saturn.

Celestial Mechanics and Dynamical Astronomy↗

USGS2015

Evidence from data storage tags for the presence of lunar and semilunar behavioral cycles in spawning Atlantic cod

Understanding the environmental processes determining the timing and success of reproduction is of critical importance to developing effective management strategies of marine fishes. Unfortunately it has proven difficult to comprehensively study the reproductive behavior of broadcast-spawning fishes. The use of electronic data storage tags (DSTs) has the potential to provide insights into the behavior of fishes. These tags allow for data collection over relatively large spatial and temporal scales that can be correlated to predicted environmental conditions and ultimately be used to refine predictions of year class strength. In this paper we present data retrieved from DSTs demonstrating that events putatively identified as Atlantic cod spawning behavior is tied to a lunar cycle with a pronounced semi-lunar cycle within it. Peak activity occurs around the full and new moon with no evidence of relationship with day/night cycles.

Environmental Biology of Fishes↗

USGS2009

The Lunar Reconnaissance Orbiter Diviner Lunar Radiometer Experiment

The Diviner Lunar Radiometer Experiment on NASA’s Lunar Reconnaissance Orbiter will be the first instrument to systematically map the global thermal state of the Moon and its diurnal and seasonal variability. Diviner will measure reflected solar and emitted infrared radiation in nine spectral channels with wavelengths ranging from 0.3 to 400 microns. The resulting measurements will enable characterization of the lunar thermal environment, mapping surface properties such as thermal inertia, rock abundance and silicate mineralogy, and determination of the locations and temperatures of volatile cold traps in the lunar polar regions.

Space Science Reviews↗