SEARCH · Search USGS

Results for “The Conversation”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16Linked to original sources

USGS2022

Detection and characterization of coastal tidal wetland change in the northeastern US using Landsat time series

Coastal tidal wetlands are highly altered ecosystems exposed to substantial risk due to widespread and frequent land-use change coupled with sea-level rise, leading to disrupted hydrologic and ecologic functions and ultimately, significant reduction in climate resiliency. Knowing where and when the changes have occurred, and the nature of those changes, is important for coastal communities and natural resource management . Large-scale mapping of coastal tidal wetland changes is extremely difficult due to their inherent dynamic nature. To bridge this gap, we developed an automated algorithm for DEtection and Characterization of cOastal tiDal wEtlands change (DECODE) using dense Landsat time series. DECODE consists of three elements, including spectral break detection, land cover classification and change characterization. DECODE assembles all available Landsat observations and introduces a water level regressor for each pixel to flag the spectral breaks and estimate harmonic time-series models for the divided temporal segments. Each temporal segment is classified (e.g., vegetated wetlands, open water, and others – including unvegetated areas and uplands) based on the phenological characteristics and the synthetic surface reflectance values calculated from the harmonic model coefficients, as well as a generic rule-based classification system. This harmonic model-based approach has the advantage of not needing the acquisition of satellite images at optimal conditions (i.e., low tide status) to avoid underestimating coastal vegetation caused by the tidal fluctuation. At the same time, DECODE can also characterize different kinds of changes including land cover change and condition change (i.e., land cover modification without conversion). We used DECODE to track status of coastal tidal wetlands in the northeastern United States from 1986 to 2020. The overall accuracy of land cover classification and change detection is approximately 95.8% and 99.8%, respectively. The vegetated wetlands and open water were mapped with user's accuracy of 94.6% and 99.0%, and producer's accuracy of 98.1% and 93.5%, respectively. The cover change and condition change were mapped with user's accuracy of 68.0% and 80.0%, and producer's accuracy of 80.5% and 97.1%, respectively. Approximately 3283 km 2 of the coastal landscape within our study area in the northeastern United States changed at least once (12% of the study area), and condition changes were the dominant change type (84.3%). Vegetated coastal tidal wetland decreased consistently (~2.6 km 2 per year) in the past 35 years, largely due to conversion to open water in the context of sea-level rise.

Remote Sensing of Environment↗

USGS2006

North American prairie wetlands are important nonforested land-based carbon storage sites

We evaluated the potential of prairie wetlands in North America as carbon sinks. Agricultural conversion has resulted in the average loss of 10.1 Mg ha- 1 of soil organic carbon on over 16 million ha of wetlands in this region. Wetland restoration has potential to sequester 378 Tg of organic carbon over a 10-year period. Wetlands can sequester over twice the organic carbon as no-till cropland on only about 17% of the total land area in the region. We estimate that wetland restoration has potential to offset 2.4% of the annual fossil CO2 emission reported for North America in 1990. ?? 2005 Elsevier B.V. All rights reserved.

Science of the Total Environment↗

USGS2001

Adsorption of sulfur dioxide on ammonia-treated activated carbon fibers

A series of activated carbon fibers (ACFs) and ammonia-treated ACFs prepared from phenolic fiber precursors have been studied to elucidate the role of pore size, pore volume, and pore surface chemistry on adsorption of sulfur dioxide and its catalytic conversion to sulfuric acid. As expected, the incorporation of basic functional groups into the ACFs was shown as an effective method for increasing adsorption of sulfur dioxide. The adsorption capacity for dry SO2 did not follow specific trends; however the adsorption energies calculated from the DR equation were found to increase linearly with nitrogen content for each series of ACFs. Much higher adsorption capacities were achieved for SO2 in the presence of oxygen and water due to its catalytic conversion to H2SO4. The dominant factor for increasing adsorption of SO2 from simulated flue gas for each series of fibers studied was the weight percent of basic nitrogen groups present. In addition, the adsorption energies calculated for dry SO2 were shown to be linearly related to the adsorption capacity of H2SO4 from this flue gas for all fibers. It was shown that optimization of this parameter along with the pore volume results in higher adsorption capacities for removal of SO2 from flue gases. ?? 2001 Elsevier Science Ltd. All rights reserved.

Carbon↗

USGS2001

Laboratory and field evaluations of the LISST-100 instrument for suspended particle size determinations

Advances in technology have resulted in a new instrument that is designed for in-situ determination of particle size spectra. Such an instrument that can measure undisturbed particle size distributions is much needed for sediment transport studies. The LISST-100 (Laser In-Situ Scattering and Transmissometry) uses the principle of laser diffraction to obtain the size distribution and volume concentration of suspended material in 32 size classes logarithmically spaced between 1.25 and 250 μm. This paper describes a laboratory evaluation of the ability of LISST-100 to determine particle sizes using suspensions of single size, artificial particles. Findings show the instrument is able to determine particle size to within about 10% with increasing error as particle size increases. The instrument determines volume (or mass) concentration using a volume conversion factor C v . This volume conversion factor is theoretically a constant. In the laboratory evaluation C v is found to vary by a factor of about three over the particle size range between 5 and 200 μm. Results from field studies in South San Francisco Bay show that values of mass concentration of suspended marine sediments estimated by LISST-100 agree favorably with estimates from optical backscatterance sensors if an appropriate value of C v , according to mean size, is used and the assumed average particle (aggregate) density is carefully chosen. Analyses of size distribution of suspended materials in South San Francisco Bay over multiple tide cycles suggest the likelihood of different sources of sediment because of different size characteristics during flood and ebb cycles.

Marine Geology↗

USGS2002

Practical application of disease resistance: A brook trout fishery selected for resistance to furunculosis

Selection is unwittingly influenced by nuances of fish culturists and adaptation of fish to intensive culture within artificial environments. When pathogens are present, susceptible individuals may be selectively eliminated from a population, accounting for inter-specific and intra-specific differences in susceptibility to disease. Biologists often intensify such selection to enhance resistance. Particularly important to this discourse is the selective breeding program initiated by the New York State Department of Environmental Conservation (Rome, NY, USA) to produce brown trout ( Salmo salar ) and brook trout ( Salvelinus fontinalis ) that are resistant to Aeromonas salmonicida . This program, specifically as it relates to brook trout, is reviewed throughout the current manuscript. In addition, we present a comparison between the performance of the Rome strain of brook trout to that of the Owhi strain of brook trout during a 17-month production cycle at the Ed Weed Fish Culture Station (Grand Isle, VT, USA) and after stocking into Vermont waters. The Owhi strain is used in recreational fisheries because it has good post-stocking survival, but these fish are sensitive to furunculosis. Our data indicated that the Rome strain had a food conversion rate of 1.3 that was slightly less than the 1.1 conversion rate of the Owhi brook trout. The growth rate measured as Monthly Temperature Units per inch (MTU/in.) among Rome brook trout (24.9 MTU/in.) was better than the Owhi brook trout (29.5 MTU/in.). Both the average length (23.6 cm) and weight (159.7 g) of individual Rome brook trout were superior to those of the Owhi strain (20.4 cm and 78.2 g, respectively). Just prior to stocking, survival within the hatchery was 84% among the Rome trout, but only 51% among the Owhi brook trout and mortality was attributed to a persistent epizootic of furunculosis. Microbiological assays indicated that the prevalence of A. salmonicida in dermal mucus attained equivalent levels within both strains of fish at different phases of the production cycle. The level of systemic infection, however, was regulated to a much greater extent by the Rome strain of brook trout throughout production. Our results indicated that the Rome brook trout strain satisfies management objectives for establishing an effective recreational brook trout fishery. Use of this strain also reduces management issues that complicate production when A. salmonicida is enzootic.

Vermont↗

USGS1999

Impact of forest type and management strategy on avian densities in the Mississippi Alluvial Valley, USA

Avian territory densities were determined from 20 Breeding Bird Censuses in mature (>30 years) bottomland hardwood stand: and 18 Breeding Bird Censuses in young (6-9 years old) cottonwood (Populas deltoides) plantations in the Mississippi Alluvial Valley. Avian species richness, diversity, and territory density were greater (p < 0.01) in bottomland hardwood stands than in intensively-managed cottonwood stands but these parameters were not impacted by selective timber harvest within bottomland hardwood stands nor by method of regeneration within cottonwood plantations (p > 0.05). Even so, detrended correspondence analysis based on avian territory densities readily segregated forest types and silvicultural treatments. Timber harvest within bottomland hardwood stands resulted in a shift in bird communities toward those found in cottonwood stands by increasing the densities of early-successional species such as Indigo Bunting (Passerina cyanea), Yellow-breasted Chat (Icteria virens), and Common Yellowthroat (Geothlypis trichas). Conversely, regenerating cottonwood stands from root sprouts, rather than planting stem cuttings, resulted in a shift in bird communities toward those found in bottomland hardwood stands by increasing densities of species such as White-eyed Vireo (Vireo griseus) and Wood Thrush (Hylocichla mustelina). Tree species diversity, angular canopy cover, and midstory density were positively associated with bird species assemblages in bottomland hardwood stands, whereas vegetation density at ground level was positively associated with bird communities in cottonwood plantations. Conversion of agricultural fields to short-rotation cottonwood plantations results in increased breeding bird populations by adding up to 140 additional territories 40 ha-1. Even so, relative conservation values, derive, from indicator species analysis and Partners in Flight concern scores, suggest that mature bottomland hardwood forests are twice as 'valuable' for bird conservation as are cottonwood plantations.

Forest Ecology and Management↗

USGS2024

Direct measurements of firn-density evolution from 2016 to 2022 at Wolverine Glacier, Alaska

Knowledge of snow and firn-density change is needed to use elevation-change measurements to estimate glacier mass change. Additionally, firn-density evolution on glaciers is closely connected to meltwater percolation, refreezing and runoff, which are key processes for glacier mass balance and hydrology. Since 2016, the U.S. Geological Survey Benchmark Glacier Project has recovered firn cores from a site on Wolverine Glacier in Alaska's Kenai Mountains. We use annual horizons in repeat cores to track firn densification and meltwater retention over seasonal and interannual timescales, and we use density measurements to quantify how the firn air content (FAC) changes through time. The results suggest the firn is densifying due primarily to compaction rather than refreezing. Liquid-water retention in the firn is transient, likely due to gravity-fed drainage and irreducible-water-content decreases that accompany decreasing porosity. We show that the uncertainty (±60 kg m −3 ) in the commonly used volume-to-mass conversion factor of 850 kg m −3 is an underestimation when glacier-wide FAC variability exceeds 12% of the glacier-averaged height change. Our results demonstrate how direct measurements of firn properties on mountain glaciers can be used to better quantify the uncertainty in geodetic volume-to-mass conversions.

Alaska↗

USGS2020

Molecular identification of water-extractable organic carbon from thermally heated soils: C-13 NMR and accurate mass analyses find benzene and pyridine carboxylic acids

To simulate the effects of wildfire on the combustion process in soils and their potential to leach organic compounds into streams and groundwater, mineral soil samples were heated at temperatures of 150–550 °C. Then, the soils were leached with deionized water, filtered, and analyzed for dissolved organic carbon. The water extract was concentrated by both XAD-8 and XAD-4 resins and analyzed by C-13 nuclear magnetic resonance and liquid chromatography time-of-flight mass spectrometry. Approximately 15–20% of the water-extractable organic carbon was identified as benzene dicarboxylic acids, tricarboxylic acids, and tetracarboxylic acid isomers, commonly called BPCAs. Also identified were isomers of pyridine dicarboxylic acids and tricarboxylic acids (PCAs). The conversion of soil organic carbon to BPCAs occurs at 250 °C and reaches a maximum between 350 and 450 °C. At higher temperatures (>450 °C), the BPCA concentrations decrease, suggesting decarboxylation and conversion to carbon dioxide and water. This is the first report of BPCAs and PCAs in water-extractable organic carbon from thermally altered soil and suggest that these compounds are possible candidates for further water-quality studies in watersheds affected by wildfire. Finally, BPCAs and PCAs could contribute to the black carbon and nitrogen in seawater and are worthy of future investigation.

Environmental Science and Technology↗

USGS1997

Mechanism of SO2 removal by carbon

The reaction of SO 2 with carbon (C) in the presence of O 2 and H 2 O involves a series of reactions that leads to the formation of sulfuric acid as the final product. The rate-determining step in the overall process is the oxidation of SO 2 to SO 3 . Three SO 2 oxidation reactions are possible. Adsorbed SO 2 (C−SO 2 ) can react either with gas phase O 2 or with adsorbed oxygen (C−O complex) to form sulfur trioxide (SO 3 ), or gas phase SO 2 can react directly with the C−O complex. In optimizing the SO 2 removal capabilities of carbon, most studies only assume a given mechanism for SO 2 adsorption and conversion to H 2 SO 4 to be operable. The appropriate SO 2 oxidation step and role of the C−O complex in this mechanism remain to be determined. The ultimate goal of this study was to prepare activated char from Illinois coal with optimal properties for low-temperature (80−150°C) removal of sulfur dioxide from coal combustion flue gas. The SO 2 adsorption capacity of activated char was found to be inversely proportional to the amount of oxygen adsorbed on its surface. A temperature-programmed desorption technique was developed to titrate those sites responsible for adsorption of SO 2 and conversion to H 2 SO 4 . On the basis of these results, a mechanism for SO 2 removal by carbon was proposed. The derived rate expression showed SO 2 adsorption to be dependent only on the fundamental rate constant and concentration of carbon atoms designated as free sites. Recent studies indicate a similar relationship exists between the rate of carbon gasification (in CO 2 or H 2 O) and the number of reactive sites as determined by transient kinetics experiments. Utilizing the concept of active or free sites, it was possible to produce a char from Illinois coal having an SO 2 adsorption capacity surpassing that of a commercial catalytic activated carbon.

Energy and Fuels↗

USGS2004

Mercury speciation and microbial transformations in mine wastes, stream sediments, and surface waters at the Almaden Mining District, Spain

Speciation of Hg and conversion to methyl-Hg were evaluated in mine wastes, sediments, and water collected from the Almade??n District, Spain, the world's largest Hg producing region. Our data for methyl-Hg, a neurotoxin hazardous to humans, are the first reported for sediment and water from the Almade??n area. Concentrations of Hg and methyl-Hg in mine waste, sediment, and water from Almade??n are among the highest found at Hg mines worldwide. Mine wastes from Almade??n contain highly elevated Hg concentrations, ranging from 160 to 34 000 ??g/g, and methyl-Hg varies from <0.20 to 3100 ng/g. Isotopic tracer methods indicate that mine wastes at one site (Almadenejos) exhibit unusually high rates of Hg-methylation, which correspond with mine wastes containing the highest methyl-Hg concentrations. Streamwater collected near the Almade??n mine is also contaminated, containing Hg as high as 13 000 ng/L and methyl-Hg as high as 30 ng/L; corresponding stream sediments contain Hg concentrations as high as 2300 ??g/g and methyl-Hg concentrations as high as 82 ng/g. Several streamwaters contain Hg concentrations in excess of the 1000 ng/L World Health Organization (WHO) drinking water standard. Methyl-Hg formation and degradation was rapid in mines wastes and stream sediments demonstrating the dynamic nature of Hg cycling. These data indicate substantial downstream transport of Hg from the Almade??n mine and significant conversion to methyl-Hg in the surface environment.

Environmental Science & Technology↗

USGS1997

Method for determination of methyl tert-butyl ether and its degradation products in water

An analytical method is described that can detect the major alkyl ether compounds that are used as gasoline oxygenates (methyl tert-butyl ether, MTBE; ethyl tert-butyl ether, ETBE; and tert-amyl methyl ether, TAME) and their most characteristic degradation products (tert-butyl alcohol, TBA; tert-butyl formate, TBF; and tert-amyl alcohol, TAA) in water at sub-ppb concentrations. The new method involves gas chromatography (GC) with direct aqueous injection (DAI) onto a polar column via a splitless injector, coupled with detection by mass spectrometry (MS). DAI-GC/MS gives excellent agreement with conventional purge-and-trap methods for MTBE over a wide range of environmentally relevant concentrations. The new method can also give simultaneous identification of polar compounds that might occur as degradation products of gasoline oxygenates, such as TBA, TBF, TAA, methyl acetate, and acetone. When the method was applied to effluent from a column microcosm prepared with core material from an urban site in New Jersey, conversion of MTBE to TBA was observed after a lag period of 35 days. However, to date, analyses of water samples from six field sites using the DAI-GC/MS method have not produced evidence for the expected products of in situ degradation of MTBE.An analytical method is described that can detect the major alkyl ether compounds that are used as gasoline oxygenates (methyl tert-butyl ether, MTBE; ethyl tert-butyl ether, ETBE; and tert-amyl methyl ether, TAME) and their most characteristic degradation products (tert-butyl alcohol, TBA; tert-butyl formate, TBF; and tert-amyl alcohol, TAA) in water at sub-ppb concentrations. The new method involves gas chromatography (GC) with direct aqueous injection (DAI) onto a polar column via a splitless injector, coupled with detection by mass spectrometry (MS). DAI-GC/MS gives excellent agreement with conventional purge-and-trap methods for MTBE over a wide range of environmentally relevant concentrations. The new method can also give simultaneous identification of polar compounds that might occur as degradation products of gasoline oxygenates, such as TBA, TBF, TAA, methyl acetate, and acetone. When the method was applied to effluent from a column microcosm prepared with core material from an urban site in New Jersey, conversion of MTBE to TBA was observed after a lag period of 35 days. However, to date, analyses of water samples from six field sites using the DAI-GC/MS method have not produced evidence for the expected products of in situ degradation of MTBE.

Environmental Science & Technology↗

USGS2021

Constraints on the geometry of the subducted Gorda Plate with converted phases generated by local earthquakes

The largest slip in great megathrust earthquakes often occurs in the 10–30 km depth range, yet seismic imaging of the material properties in this region has proven difficult. We utilize a dense onshore-offshore passive seismic dataset from the southernmost Cascadia subduction zone where seismicity in the mantle of the subducted Gorda Plate produces S -to- P and P -to- S conversions generated within a few km of the plate interface. These conversions typically occur in the 10–20 km depth range at either the top or bottom of a ∼5 km thick layer with a high Vp/Vs that we infer to be primarily the subducted crust. We use their arrival times and amplitudes to infer the location of the top and bottom of the subducted crust as well as the velocity contrasts across these discontinuities. Comparing with both the Slab1.0 and the updated Slab2 interface models, the Slab2 model is generally consistent with the converted phases, while the Slab1.0 model is 1–2 km deeper in the 2–20 km depth range and ∼6–8 km too deep in the 10–20 km depth range between 40.25°N and 40.4°N. Comparing the amplitudes of the converted phases to synthetics for simplified velocity structures, the amplitude of the converted phases requires models containing a ∼5 km thick zone with at least a ∼10%–20% reduction in S wave velocity. Thus, the plate boundary is likely contained within or at the top of this low velocity zone, which potentially indicates a significant porosity and fluid content within the seismogenic zone.

California↗

USGS2020

Measuring basal force fluctuations of debris flows using seismic recordings and empirical green's functions

We present a novel method for measuring the fluctuating basal normal and shear stresses of debris flows by using along‐channel seismic recordings. Our method couples a simple parameterization of a debris flow as a seismic source with direct measurements of seismic path effects using empirical Green's functions generated with a force hammer. We test this method using two large‐scale (8 and 10 m 3 ) experimental flows at the U.S. Geological Survey debris‐flow flume that were recorded by dozens of three‐component seismic sensors. The seismically derived basal stress fluctuations compare well in amplitude and timing to independent force plate measurements within the valid frequency range (15–50 Hz). We show that although the high‐frequency seismic signals provide band‐limited forcing information, there are systematic relations between the fluctuating stresses and independently measured flow properties, especially mean basal shear stress and flow thickness. However, none of the relationships are simple, and since the flow properties also correlate with one another, we cannot isolate a single factor that relates in a simple way to the fluctuating forces. Nevertheless, our observations, most notably the gradually declining ratio of fluctuating to mean basal stresses during flow passage and the distinctive behavior of the coarse, unsaturated flow front, imply that flow style may be a primary control on the conversion of translational to vibrational kinetic energy. This conversion ultimately controls the radiation of high‐frequency seismic waves. Thus, flow style may provide the key to revealing the nature of the relationship between fluctuating forces and other flow properties.

Journal of Geophysical Research Earth Surface↗

USGS2014

The effect of a well on the flow of a nearby stream

In many irrigation‐districts where the supplies of surface‐water from a stream nave been entirely appropriated, pumping from wells has been resorted to in order to supplement the surface‐supply. Where the pumps are near a stream that has a flow during the irrigation‐season, either because of normal ground‐water flow or because of return flow from surface‐water irrigation, the pumping is likely to diminish the stream‐flow. Conversely, diversions of water from a stream may diminish the supply of wells that were formerly supplied indirectly by seepage from the stream, but the problem involved is of a different nature than its converse and will not be discussed here.

Eos, Transactions, American Geophysical Union↗

USGS2017

Signals of impending change

Society has an increasing awareness that there are finite limits to what we can expect the planet to absorb and still provide goods and services at current rates 1 . Both historical reconstructions and contemporary events continue to remind us that ecological regime changes are often abrupt rather than gradual. This reality motivates researchers who seek to discover leading indicators for impending ecosystem change. Berdugo et al . 2 report an important advance in our ability to anticipate the conversion of arid lands from self-organized, self-maintaining and productive ecosystems, to a state characterized by disorganization and low functionality. Such conversions have important implications for our understanding of ‘desertification’ — which is a shift from arid to desert-like conditions. Theoretical studies have suggested that patterns in the patchiness of vegetation might indicate how close a system is to making an abrupt change to desert-like conditions 3 , 4 , 5 . Empirical studies, however, have tended to show instead that simply the total cover of vegetation, rather than its arrangement, often foretells the state of the system 4 , 5 , 6 , 7 , 8 , 9 . Berdugo et al . 2 combine these competing ideas into one integrated perspective. They show how major environmental drivers, such as aridity, influence both vegetation cover and patchiness, as well as where self-organizing, stabilizing forces in the vegetation are likely to be found.

Nature Ecology & Evolution↗

USGS2021

Diet-driven mercury contamination is associated with polar bear gut microbiota

The gut microbiota may modulate the disposition and toxicity of environmental contaminants within a host but, conversely, contaminants may also impact gut bacteria. Such contaminant-gut microbial connections, which could lead to alteration of host health, remain poorly known and are rarely studied in free-ranging wildlife. The polar bear ( Ursus maritimus ) is a long-lived, wide-ranging apex predator that feeds on a variety of high trophic position seal and cetacean species and, as such, is exposed to among the highest levels of biomagnifying contaminants of all Arctic species. Here, we investigate associations between mercury (THg; a key Arctic contaminant), diet, and the diversity and composition of the gut microbiota of polar bears inhabiting the southern Beaufort Sea, while accounting for host sex, age class and body condition. Bacterial diversity was negatively associated with seal consumption and mercury, a pattern seen for both Shannon and Inverse Simpson alpha diversity indices (adjusted R 2 = 0.35, F 1,18 = 8.00, P = 0.013 and adjusted R 2 = 0.26, F 1,18 = 6.04, P = 0.027, respectively). No association was found with sex, age class or body condition of polar bears. Bacteria known to either be involved in THg methylation or considered to be highly contaminant resistant, including Lactobacillales, Bacillales and Aeromonadales, were significantly more abundant in individuals that had higher THg concentrations. Conversely, individuals with higher THg concentrations showed a significantly lower abundance of Bacteroidales, a bacterial order that typically plays an important role in supporting host immune function by stimulating intraepithelial lymphocytes within the epithelial barrier. These associations between diet-acquired mercury and microbiota illustrate a potentially overlooked outcome of mercury accumulation in polar bears.

Scientific Reports↗

USGS2023

Mapping methane reduction potential of tidal wetland restoration in the United States

Coastal wetlands can emit excess methane in cases where they are impounded and artificially freshened by structures that impede tidal exchange. We provide a new assessment of coastal methane reduction opportunities for the contiguous United States by combining multiple publicly available map layers, reassessing greenhouse gas emissions datasets, and applying scenarios informed by geospatial information system and by surveys of coastal managers. Independent accuracy assessment indicates that coastal impoundments are under-mapped at the national level by a factor of one-half. Restorations of freshwater-impounded wetlands to brackish or saline conditions have the greatest potential climate benefit of all mapped conversion opportunities, but were rarer than other potential conversion events. At the national scale we estimate potential emissions reduction for coastal wetlands to be 0.91 Teragrams of carbon dioxide equivalents year −1 , a more conservative assessment compared to previous estimates. We provide a map of 1,796 parcels with the potential for tidal re-connection.

Communications Earth & Environment↗

USGS2025

Ecologically informed solar enables a sustainable energy transition in U.S. croplands

United States (U.S.) croplands are ideal recipient environments for solar photovoltaic (PV) energy because they are flat and have a high solar resource. Perceived threats of solar to agriculture have led some stakeholders to suggest that croplands be exclusively used to produce food. However, 12 million hectares of U.S. croplands, an area about the size of New York State, are already dedicated to corn grown for ethanol (i.e., biofuel), an energy product that requires significantly more land than solar PV per unit energy. Ecosystem service benefits of an ecologically-informed approach to solar development (i.e., ecovoltaics), coupled with significant land-use advantages over corn ethanol, make solar an attractive solution for a sustainable energy transition in croplands. Here, we evaluated how the conversion of a small fraction of corn-ethanol croplands into ecovoltaic solar facilities might improve land-use efficiency of energy generation, enhance ecosystem services, and provide landscape diversification. Through spatial analyses, we determined that converting just 3.2% of land currently used for corn ethanol would increase the share of utility-scale solar energy in the U.S. from 3.9% to 13%. We also identified target locations where strategic conversion of corn ethanol to solar PV co-located with perennial vegetation could filter excess nutrients transported from adjacent farm runoff, diversify and connect agricultural landscapes, and provide local wildlife habitat. In contrast to the common perception of land-use competition and land scarcity in the energy transition, our findings highlight benefits of co-located energy landscapes that integrate fundamental principles of energy development and sustainable agroecosystems.

contiguous United States↗