Search USGS⌕ Search

SEARCH · Search USGS

Results for “Offshore”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16Linked to original sources
USGS1998

Volcanism offshore of Vesuvius Volcano in Naples Bay

High-resolution seismic reflection data are used to identify structural features in Naples Bay near Vesuvius Volcano. Several buried seismic units with reflection-free interiors are probably volcanic deposits erupted during and since the formation of the breached crater of Monte Somma Volcano, which preceded the growth of Vesuvius. The presumed undersea volcanic deposits are limited in extent; thus, stratigraphie relationships cannot be established among them. Other features revealed by our data include (a) the warping of lowstand marine deposits by undersea cryptodomes located approximately 10 km from the summit of Vesuvius, (b) a succession of normal step faults that record seaward collapse of the volcano, and (c) a small undersea slump in the uppermost marine deposits of Naples Bay, which may be the result of nue??e ardentes that entered the sea during a major eruption of Vesuvius in 1631. Detection of these undersea features illustrates some capabilities of making detailed seismic reflection profiles across undersea volcanoes.

Vesuvius Volcano↗
USGS1988

Late Cenozoic offsets on the offshore connection between the Fairweather and Queen Charlotte faults off southeast Alaska

Closely spaced seismic reflection profiles permit us to extend the onshore Fairweather fault across the continental margin off southeast Alaska to the Queen Charlotte fault. Evidence for Quaternary movement along this major plate boundary includes 20–40-m high sea-floor scarps, offset subsurface seismic reflectors, sea-floor bathymetry that indicates as much as 70 km of right-lateral offset in the last 1 m.y., 5–6 cm/yr of movement on the onshore Fairweather fault, and recorded seismicity along the fault. The Fairweather-Queen Charlotte fault system, similar in dimension to the San Andreas fault system, is a dextral transform fault that truncates the continental margin of North America. Much of the late Cenozoic motion between the Pacific and North American plates has been taken up along the fault system. The Fairweather-Queen Charlotte fault evolved to its present form after passage of the Yakutat block, the youngest of the allochthonous terranes that form southern Alaska.

Marine Geology↗
USGS1992

Effect of sea-level variation on upper-slope depositional processes offshore of Tiber delta, Tyrrhenian Sea, Italy

The upper slope and outer shelf in front of the Tiber River mouth (east-central Tyrrhenian Sea) exhibits a series of about 15 gullies that are not clearly related to present-day erosional or depositional processes. An extensive, high-resolution, seismic-reflection profiling survey of a 450 km 2 area in front of the Tiber delta shows several generations of similar features within the older depositional sequences underlying the outer continental shelf. The gully relief appears dominantly depositional, probably developed during lowstand periods when the Tiber River mouth was relatively near the shelf break. The position of the gullied intervals, including those on the modern slope relict from the last lowstand, shows a successive northward shift with time. This northward shift indicates continued tilting of this part of the eastern Tyrrhenian continental margin, probably resulting from a continued subsidence to the north.

Marine Geology↗
USGS1988

Organic geothermometry of petroleum from Escanaba Trough, offshore northern California

We have measured the extent of hopane and sterane isomerization and of monoaromatic-steroid-hydrocarbon aromatization in a sample of hydrothermally derived petroleum from the Escanaba Trough, a sediment-covered, volcanically active ridge axis. The results, along with kinetic parameters, predict the possible time-temperature history of the petrolum-forming process for this sample. The extent of these reactions is consistent with petroleum formation by intense heating (about 300–350°C) if the time period of this heating was as short as about 100 yr. Such a time scale is reasonable for hydrothermal-discharge events associated with ridge-crest volcanism.

California↗
USGS2017

Sand ridge morphology and bedform migration patterns derived from bathymetry and backscatter on the inner-continental shelf offshore of Assateague Island, USA

The U.S. Geological Survey and the National Oceanographic and Atmospheric Administration conducted geophysical and hydrographic surveys, respectively, along the inner-continental shelf of Fenwick and Assateague Islands, Maryland and Virginia over the last 40 years. High resolution bathymetry and backscatter data derived from surveys over the last decade are used to describe the morphology and presence of sand ridges on the inner-continental shelf and measure the change in the position of smaller-scale (10–100 s of meters) seafloor features. Bathymetric surveys from the last 30 years link decadal-scale sand ridge migration patterns to the high-resolution measurements of smaller-scale bedform features. Sand ridge morphology on the inner-shelf changes across-shore and alongshore. Areas of similar sand ridge morphology are separated alongshore by zones where ridges are less pronounced or completely transected by transverse dunes. Seafloor-change analyses derived from backscatter data over a 4–7 year period show that southerly dune migration increases in magnitude from north to south, and the east-west pattern of bedform migration changes ~ 10 km north of the Maryland-Virginia state line. Sand ridge morphology and occurrence and bedform migration changes may be connected to observed changes in geologic framework including topographic highs, deflated zones, and sand availability. Additionally, changes in sand ridge occurrence and morphology may help explain changes in the long-term shoreline trends along Fenwick and Assateague Islands. Although the data presented here cannot quantitatively link sand ridges to sediment transport and shoreline change, it does present a compelling relationship between inner-shelf sand availability and movement, sand ridge occurrence and morphology, geologic framework, and shoreline behavior.

Assateague Island↗
USGS2018

Seafloor fluid seeps on Kimki Ridge, offshore southern California: Links to active strike-slip faulting

The Kimki Ridge fluid seeps are located in western Catalina Basin about 60 km southwest of the southern California mainland and at a water depth of approximately 1100 m. Multichannel seismic reflection profiles collected by the U.S. Geological Survey (USGS) in 2014 show acoustic transparency within the Kimki Ridge, suggesting the possibility of fluid seeps and possible sub-seafloor fluid pathways. Subsequent multibeam bathymetric and backscatter intensity data collected during a cooperative University of Washington/USGS cruise in early 2016 show subtle seafloor buildups with high acoustic backscatter (reflectivity) in three places along Kimki Ridge, supporting the existence of fluid seepage. A Remotely Operated Vehicle (ROV) dive, conducted as part of the Nautilus Exploration Program, took place in August 2016 to confirm the presence of these previously unknown seeps and document their characteristics as well as those of any associated biological communities. Two of the three seeps were explored by ROV, and showed abundant evidence of fluid seepage, including characteristic algal mats, chemosynthetic clams, and authigenic carbonate formation. The seeps are comprised of carbonate buildups 1–3 m thick and 300–500 m across. Within these areas, we interpret broad crater-like depressions 30–50 m across and 1–2 m deep to be individual seep vents. The seep areas appear to be broad zones of diffuse seepage that support chemosynthetic biologic communities; however, active venting was not observed. Geochemical analyses of rock samples collected from the seeps indicate microbially driven anaerobic oxidation of methane at or near the sediment water interface. Seismic-reflection profiles show chimney-like fluid pathways along the limbs and in the axis of the fold forming Kimki Ridge, and evidence of methane in shallow sediments can be traced into the adjacent Catalina Basin. A system of closely spaced faults located at the axis of the Kimki Ridge anticline may serve as pathways to allow fluid flow to the seafloor. Our data are consistent with other studies that suggest that transpression is an important component in the formation and localization of fluid seeps in a strike-slip setting, implying that seep formation may be a common occurrence at fault stepovers or transpressional bends in strike-slip systems.

California↗
USGS2007

Comparative velocity structure of active Hawaiian volcanoes from 3-D onshore-offshore seismic tomography

We present a 3-D P-wave velocity model of the combined subaerial and submarine portions of the southeastern part of the Island of Hawaii, based on first-arrival seismic tomography of marine airgun shots recorded by the onland seismic network. Our model shows that high-velocity materials (6.5-7.0??km/s) lie beneath Kilauea's summit, Koae fault zone, and the upper Southwest Rift Zone (SWRZ) and upper and middle East Rift Zone (ERZ), indicative of magma cumulates within the volcanic edifice. A separate high-velocity body of 6.5-6.9??km/s within Kilauea's lower ERZ and upper Puna Ridge suggests a distinct body of magma cumulates, possibly connected to the summit magma cumulates at depth. The two cumulate bodies within Kilauea's ERZ may have undergone separate ductile flow seaward, influencing the submarine morphology of Kilauea's south flank. Low velocities (5.0-6.3??km/s) seaward of Kilauea's Hilina fault zone, and along Mauna Loa's seaward facing Kao'iki fault zone, are attributed to thick piles of volcaniclastic sediments deposited on the submarine flanks. Loihi seamount shows high-velocity anomalies beneath the summit and along the rift zones, similar to the interpreted magma cumulates below Mauna Loa and Kilauea volcanoes, and a low-velocity anomaly beneath the oceanic crust, probably indicative of melt within the upper mantle. Around Kilauea's submarine flank, a high-velocity anomaly beneath the outer bench suggests the presence of an ancient seamount that may obstruct outward spreading of the flank. Mauna Loa's southeast flank is also marked by a large, anomalously high-velocity feature (7.0-7.4??km/s), interpreted to define an inactive, buried volcanic rift zone, which might provide a new explanation for the westward migration of Mauna Loa's current SWRZ and the growth of Kilauea's SWRZ. ?? 2007 Elsevier B.V. All rights reserved.

Earth and Planetary Science Letters↗
USGS2009

Abundance and distribution of benthic macroinvertebrates in offshore soft sediments in Western Lake Huron, 2001-2007

Invasive species have had major impacts on the Great Lakes. This is especially true of exotic dreissenid mussels which are associated with decreased abundance of native macroinvertebrates and changes in food availability for fish. Beginning in 2001, we added a benthic macroinvertebrate survey to the USGS-Great Lakes Science Center's annual fall prey fish assessment of Lake Huron to monitor abundance of macrobenthos. Mean abundance of Diporeia, the most abundant benthic taxon in Lake Huron reported by previous investigators, declined greatly between 2001 and 2007. Diporeia was virtually absent at 27-m sites by 2001, decreased and was lost completely from 46-m depths by 2006, but remained present at reduced densities at 73-m sites. Dreissenids in our samples were almost entirely quagga mussels Dreissena bugensis. Zebra mussels Dreissena polymorpha were virtually absent from our samples, suggesting that they were confined to nearshore areas shallower than we sampled. Loss of Diporeia at individual sites was associated with arrival of quagga mussels, even when mussel densities were low. Quagga mussel density peaked during 2002, then decreased thereafter. During the study quagga mussels became established at most 46-m sites, but remained rare at 73-m sites. Length frequency distributions suggest that initial widespread recruitment may have occurred during 2001-2002. Like other Great Lakes, Lake Huron quagga mussels were associated with decreased abundance of native taxa, but negative effects occurred even though dreissenid densities were much lower. Dreissenid effects may extend well into deep oligotrophic habitats of Lake Huron.

Journal of Great Lakes Research↗
USGS2017

Vertical distribution of alewife in the Lake Ontario offshore: Implications for resource use

Oligotrophication of Lake Ontario has led to increased water clarity and an increased proportion of zooplankton residing in the metalimnion during the day, which may affect the utilization of different depth regions for planktivorous fish. We investigated day and night distributions of fish using hydroacoustics and suspended vertical gillnets during the summer of 2013 when a deep chlorophyll layer (DCL) was established. We related fish distributions to concurrent measures of temperature and prey (zooplankton) density. Alewife dominated in vertical gill net catches, indicating that most acoustic targets were alewife. Alewife schooled during the day in the bottom of the mixed layer, and at dusk alewife schools broke up and fish moved towards the surface. We hypothesize this movement followed migrating zooplankton to allow feeding at night; alewife sampled from vertical gillnets fed on cyclopoid copepods and cladocerans, prey groups that migrate into the epilimnion at night. Some alewife remained at the bottom of the mixed layer at night and these fish ate deep-water calanoid copepods such as Limnocalanus . Vertical distributions were best predicted by temperature and the interaction between temperature and zooplankton density. We include uplooking acoustics data to complement our downlooking datasets, which provided evidence for potential bias in downlooking acoustic assessments of alewife due to high proportions of alewife found in the surface exclusion zone. Our approach combining several datasets provides a new perspective to understand summer diel distribution of alewife and the factors driving their distribution.

Journal of Great Lakes Research↗
USGS2018

Controls on submarine canyon head evolution: Monterey Canyon, offshore central California

The Monterey submarine canyon, incised across the continental shelf in Monterey Bay, California, provides a record of the link between onshore tectonism, fluvial transport, and deep-marine deposition. High-resolution seismic-reflection imaging in Monterey Bay reveals an extensive paleocanyon unit buried below the seafloor of the continental shelf around Monterey and Soquel canyon heads. Paleocanyons shifted position through numerous phases of cut-and-fill in response to Salinas, Pajaro, and San Lorenzo river extensions and avulsions across the continental shelf during high-frequency Pleistocene sea-level and climatic variations. Five seismic facies within the Monterey paleocanyon unit and below the modern canyon are defined to interpret canyon evolution during the Pleistocene. Repeated sea-level oscillations appear to have switched the main fairway(s) of sediment transport. Large-scale erosion and fill occurred in marine environments. Paleocanyon fill is characterized by paleo-axial channel deposits and mass transport deposits, followed by canyon head abandonment and marine sedimentation. The upper portion of the paleocanyon unit contains relatively small channels that were likely incised by erosion in the paleo-Salinas and Pajaro rivers and filled with a mix of nonmarine and marine deposits. Shifting position of submarine canyons over time is characteristic of Monterey Bay, east of the Monterey Bay Fault Zone, and is likely unidentified in other submarine canyon head regions that lack dense high-resolution seismic-reflection subbottom images. We show that canyon heads can be areas of sediment accumulation linked to sea-level oscillations, providing new insights into submarine canyon evolution and sequence stratigraphy.

California↗
USGS2010

Seismic imaging of a fractured gas hydrate system in the Krishna-Godavari Basin offshore India

Gas hydrate was discovered in the Krishna-Godavari (KG) Basin during the India National Gas Hydrate Program (NGHP) Expedition 1 at Site NGHP-01-10 within a fractured clay-dominated sedimentary system. Logging-while-drilling (LWD), coring, and wire-line logging confirmed gas hydrate dominantly in fractures at four borehole sites spanning a 500m transect. Three-dimensional (3D) seismic data were subsequently used to image the fractured system and explain the occurrence of gas hydrate associated with the fractures. A system of two fault-sets was identified, part of a typical passive margin tectonic setting. The LWD-derived fracture network at Hole NGHP-01-10A is to some extent seen in the seismic data and was mapped using seismic coherency attributes. The fractured system around Site NGHP-01-10 extends over a triangular-shaped area of ~2.5 km2 defined using seismic attributes of the seafloor reflection, as well as " seismic sweetness" at the base of the gas hydrate occurrence zone. The triangular shaped area is also showing a polygonal (nearly hexagonal) fault pattern, distinct from other more rectangular fault patterns observed in the study area. The occurrence of gas hydrate at Site NGHP-01-10 is the result of a specific combination of tectonic fault orientations and the abundance of free gas migration from a deeper gas source. The triangular-shaped area of enriched gas hydrate occurrence is bound by two faults acting as migration conduits. Additionally, the fault-associated sediment deformation provides a possible migration pathway for the free gas from the deeper gas source into the gas hydrate stability zone. It is proposed that there are additional locations in the KG Basin with possible gas hydrate accumulation of similar tectonic conditions, and one such location was identified from the 3D seismic data ~6 km NW of Site NGHP-01-10. ?? 2010.

Marine and Petroleum Geology↗
USGS2019

Permeability variation and anisotropy of gas hydrate-bearing pressure-core sediments recovered from the Krishna–Godavari Basin, offshore India

Permeability measurements were conducted on gas hydrate-bearing pressure-core sediments recovered from the Krishna-Godavari Basin during India's National Gas Hydrate Program Expedition 02. Pressure cores collected in the deep seabed of the Indian Ocean were cut and stored under high pressure and low temperature on the D/V Chikyu using pressure core analyzing tools. A total of 25 1.2-m storage chambers were transferred to Japan from India for pressure core studies using pressure-core analysis tools at the National Institute of Advanced Industrial Science and Technology. The sediment core's pressure and temperature were maintained within the hydrate stability conditions during the entire process of transfer and loading into a triaxial testing apparatus called TACTT, which can simulate the in-situ stress state under triaxial conditions. The hydrate saturation of the samples was in the range of 50¬90%. It was found that the initial effective water permeability was in range of 0.01 mD to tens of mD, depending on the hydrate saturation and the mean particle size of the host sediment. The hydrate pore space morphology is also a critical factor, and results suggest hydrates are forming in the pore centers, but also as a sediment grain coating. In a first for gas hydrate-bearing pressure cores, the permeability anisotropy was established via vertical and horizontal flow tests combined with a pore fluid flow simulation. The horizontal/vertical permeability ratio was found to be 4. Additionally, the effective stress dependency of permeability was investigated by performing flow tests at different effective stresses. Due to decreasing porosity and particle crushing, the permeability dropped by approximately 90% for an effective stress increase of 10 MPa.

Krishna–Godavari Basin↗
USGS2019

Compressibility and particle crushing of Krishna-Godavari Basin sediments from offshore India: Implications for gas production from deep-water gas hydrate deposits

Depressurizing a gas hydrate reservoir to extract methane induces high effective stresses that act to compress the reservoir. Predicting whether a gas hydrate reservoir is viable as an energy resource requires enhanced understanding of the reservoir’s compressibility and susceptibility to particle crushing in response to elevated effective stress because of their impact on the long-term permeability and geomechanical stability of the reservoir. This study investigates physical and geomechanical properties of natural sediments with and without tetrahydrofuran (THF) hydrate subjected to high effective stresses of up to 25 MPa. Experimental results show the stiffness of hydrate-free sediments is mainly governed by the stress state and history, while the stiffness of hydrate-bearing sediments reflects both the grain supporting nature of the interconnected hydrate phase and stress effects. The Poisson’s ratio of hydrate-bearing sediments at low stresses is dominated by the Poisson’s ratio of the interconnected pore-filling phases, and dominated at high stresses by elastic properties of both the skeleton and pore-filling phases. The stress-void ratio responses of hydrate-bearing sediments above the pre-consolidation stress yields a slightly convex-downward trend, suggesting compressibility is influenced by the stiffness of THF hydrate and sediment grains rather than only by void space reduction. The shape of the compression index (Cc) trend may be attributed to an increasing effective gas hydrate saturation as the total pore volume decreases under loading. The results also show that the presence of THF hydrate in sediments can mitigate particle crushing by suppressing particle rearrangement and supporting a portion of the load that would otherwise have to be carried by the sediment. Therefore, the loss of hydrate crystals during gas production may exacerbate sand crushing.

Marine and Petroleum Geology↗
USGS2019

Multi-measurement approach for establishing the base of gas hydrate occurrence in the Krishna-Godavari Basin for sites cored during Expedition NGHP-02 in the offshore of India

The 2015 National Gas Hydrate Program of India's second expedition, NGHP-02, acquired logging and coring datasets for constraining the base of the gas hydrate occurrence zone (deepest GH) and the theoretical base of gas hydrate stability zone (BGHS). These data are used here for two primary goals: to constrain the deepest occurrence of gas hydrate relative to predicted stability limits and the observed BSR, and to characterize the nature of the contact between gas hydrate-bearing sediment and the underlying gas hydrate-free sediment. A consensus depth for the deepest GH is derived for each NGHP-02 coring site from downhole indicators of gas hydrate occurrence obtained from well-log electrical resistivity and acoustic data, pressure core compressional wave velocity measurements, and conventional core measurements of anomalously low temperatures. To establish the theoretical BGHS, models of gas hydrate phase stability with depth are compared with downhole temperature profiles derived from: 1) assuming a constant geothermal gradient consistent with downhole temperature measurements, and 2) assuming constant heat flow using a geotherm through the downhole temperature measurements and incorporating thermal conductivity calculated from borehole logging data. Although the deepest NGHP-02 GH occurrences are controlled at several sites by a lithologic boundary, most sites have deepest GH occurrences within a single coarse-grained lithology. Cutoffs within a single coarse-grained lithology, which occur for the primary NGHP-02 Area B gas hydrate reservoir, will inhibit pore-pressure drawdowns used to extract methane from gas hydrate as an energy resource.

Bay of Bengal↗
USGS2019

Pressure core analysis of geomechanical and fluid flow properties of seals associated with gas hydrate-bearing reservoirs in the Krishna-Godavari Basin, offshore India

Physical properties of the sediment directly overlying a gas hydrate reservoir provide important controls on the effectiveness of depressurizing that reservoir to extract methane from gas hydrate as an energy resource. The permeability of overlying sediment determines if a gas hydrate reservoir’s upper contact will provide an effective seal that enables efficient reservoir depressurization. Compressibility, stiffness and strength indicate how overlying sediment will deform as the in situ stress changes during production, providing engineering data for well designs. Assessing these properties requires minimally-disturbed sediment. India’s National Gas Hydrates Program Expedition 2 (NGHP-02) provided an opportunity to study these seal sediment properties, reducing disturbance from gas exsolution and bubble growth by collecting a pressure core from the seal sediment just above the primary gas hydrate reservoir at Site NGHP-02-08 in Area C of the Krishna-Godavari Basin. The effective stress chamber (ESC) and the direct shear chamber (DSC) devices in the suite of Pressure Core Characterization Tools (PCCTs) were used to measure permeability, compressibility, stiffness and shear strength at the in situ vertical stress. Geotechnical properties of the predominantly fine-grained seal layer at in situ vertical stress are in typical clay sediment ranges, with low measured permeability (0.02 mD), high compressibility (Cc = 0.26 – 0.33) and low shear strength (404 kPa). Though pressure and temperature were maintained throughout the collection and measurement process to stabilize gas hydrate, the lack of effective stress in the pressure core storage chamber and the chamber pressurization with methane-free water caused core expansion and gas hydrate in a thin coarser-grained layer to dissolve. The PCCTs can reapply in situ stress with incremental loading steps during a consolidation test to account for sediment compaction. Gas hydrate dissolution can be limited by storing cores just above freezing temperatures, and by using solid spacers to reduce the storage chamber’s free volume.

Marine and Petroleum Geology↗
USGS2019

Permeability anisotropy and relative permeability in sediments from the National Gas Hydrate Program Expedition 02, offshore India

Gas and water permeability through hydrate-bearing sediments essentially governs the economic feasibility of gas production from gas hydrate deposits. Characterizing a reservoir’s permeability can be difficult because even collocated permeability measurements can vary by 4-5 orders of magnitude, due partly to differences between how various testing methods inherently measure permeability in different directions and at different scales. This study uses a customized flow anisotropy cell to investigate geomechanical and hydrological properties of hydrate-bearing sediments focusing on permeability anisotropy (i.e., horizontal, kh, to vertical, kv, permeability ratio) and relative permeability. Two cores recovered during India’s National Gas Hydrate Program Expedition 02 (NGHP-02) are tested in this study. Near in situ effective vertical stress, ~ 2MPa, the permeability anisotropy is approximately kh/kv = 1.86 for the “seal core” (from a fine-grained non-reservoir overburden sedimentary section) and kh/kv = 4.24 for the gas hydrate reservoir score with tetrahydrofuran (THF) hydrate saturation Sh = 0.8. Permeability anisotropy increases exponentially with effective vertical stress, as described by kh/kv = α(σv/MPa)^β, with α = 1.6, β = 0.22 for seal sediment and α = 3, β = 0.5 for THF hydrate-bearing sediment. Results imply the measured permeability from permeameter tests with vertical flow may underestimate the reservoir’s flow performance, which is mainly horizontal (radial) toward a vertical well. Hydrates in sediment increase the gas-entry pressure and residual water saturation, but decrease the water retention curve’s shape factor (m), resulting in a steeper curve. Distributions of available pore space sizes for flow in sediment with and without THF hydrate (Sh = 0.8) follow a log-normal distribution. Hydrate formation decreases the apparent mean pore size from ~10 µm to ~2 µm, without evidently changing the pore size distribution's standard deviation. Gas hydrate dissociation increases effective permeability and relative permeability to gas.

Journal of Marine and Petroleum Geology↗
USGS2022

Diatom influence on the production characteristics of hydrate-bearing sediments: Examples from Ulleung Basin, offshore South Korea

The Ulleung Basin Gas Hydrate field expeditions in 2007 (UBGH1) and 2010 (UBGH2) sought to assess the Basin's gas hydrate resource potential. Coring operations in both expeditions recovered evidence of gas hydrate, primarily as fracture-filling (or vein type) morphologies in mainly silt-sized, fine-grained sediment, but also as pore-occupying hydrate in the coarser-grained layers of interbedded sand and fine-grained systems. A commonality across many of these occurrences is the presence of diatoms in the fine-grained sediment. Here we tested fine-grained sediment (median grain size <12.5 μm) associated with hydrate occurrences at four UBGH2 sites (UBGH2-2-2, UBGH2-3, UBGH2-6 and UBGH2-11) to investigate potential impacts of diatoms on efforts to extract methane from hydrate, or to tap hydrocarbon reservoirs beneath hydrate-bearing sediment. Two key considerations are: the extent to which diatoms control sediment mechanical properties, and the extent to which pore-water freshening, which occurs as gas hydrate breaks down during resource extraction, alters the diatom control on sediment mechanical properties. We conducted experiments to measure sediment index properties, sedimentation behavior and compressibility to address these considerations. We relied on scanning electron microscope (SEM) imagery and X-ray powder diffraction (XRD) to characterize the sediment mineralogy. Our high-level findings are that at the ∼20–45% (by volume) diatom concentrations observed at these UBGH2 sites, sediment compressibility increases with diatom content, but diatoms only appear to increase porosity and permeability at the highest diatom concentration (∼45%). Our measurements suggest in situ compression indices of 0.35–0.55 and permeabilities on the order of 0.01milliDarcies (1 × 10 −17 m 2 ) can be anticipated at these sites. Importantly, these properties are not expected to vary significantly upon pore water freshening that accompanies gas hydrate dissociation during production.

East Sea, Ulleung Basin↗
USGS2018

Spatial distribution and ecological risk assessment of heavy metals in coastal surface sediments in the Hebei Province offshore area, Bohai Sea, China

Seven hundred and nine surface sediment samples, along with deeper sediment samples, were collected from Hebei Province along the coastal section of the Bohai Sea, China, and analyzed for grain size, concentrations of organic carbon (Corg) and heavy metals (Cu, Pb, Zn, Cr, Cd, As, and Hg). Results indicated that the average concentrations in the sediments were 16.1 mg/kg (Cu), 19.4 mg/kg (Pb), 50 mg/kg (Zn), 48.8 mg/kg (Cr), 0.1 mg/kg (Cd), 8.4 mg/kg (As), and 20.3 μg/kg (Hg). These concentrations generally met the China Marine Sediment Quality criteria. However, both pollution assessments indicated moderate to strong Cd and Hg contamination in the study area. The potential ecological risk index suggested that the combined ecological risk of the seven studied metals may be low, but that 24.5% of the sites, where sediments were more finer and higher in Corg concentration, had high ecological risk in Hg and Cd pollution.

Bohai Sea, Hebei Province↗