Search USGS⌕ Search

SEARCH · Search USGS

Results for “Industrial Minerals”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16Linked to original sources
USGS2016

Exploration review

This summary of international mineral exploration activities for the year 2015 draws upon information from industry sources, published literature, the SNL Metals & Mining (SNL) (Charlottesville, VA) data base, and specialists in the U.S. Geological Survey (USGS) National Minerals Information Center. The summary provides data on exploration budgets by region and mineral commodity, identifies significant mineral discoveries and areas of mineral exploration, discusses government programs affecting the mineral exploration industry, and presents analyses of exploration activities performed by the mineral industry.

Mining Engineering↗
USGS2011

Exploration review

This summary of international mineral exploration activities for the year 2010 draws upon available information from industry sources, published literature and U.S. Geological Survey (USGS) specialists. The summary provides data on exploration budgets by region and mineral commodity, identifies significant mineral discoveries and areas of mineral exploration, discusses government programs affecting the mineral exploration industry and presents analyses of exploration activities performed by the mineral industry.

Mining Engineering↗
USGS2015

Frac sand in the United States: a geological and industry overview

A new mineral rush is underway in the upper Midwest of the United States, especially in Wisconsin and Minnesota, for deposits of high-quality frac sand that the mining industry calls “Northern White” sand or “Ottawa” sand. Frac sand is a specialized type of sand that is added to fracking fluids that are injected into unconventional oil and gas wells during hydraulic fracturing (fracking or hydrofracking), a process that enhances petroleum extraction from tight (low permeability) reservoirs. Frac sand consists of natural sand grains with strict mineralogical and textural specifications that act as a proppant (keeping induced fractures open), extending the time of release and the flow rate of hydrocarbons from fractured rock surfaces in contact with the wellbore. The current sand mining surge has been driven by the boom in unconventional oil and gas production that has been largely spurred by advancements in technology promoting the expansion of hydraulic fracturing and horizontal drilling over the past decade. Because of its superior quality, the sand of the upper Midwest not only supports the majority of domestic oil and gas production, but it also supplies frac sand to some of Canada’s western shale basins. The principal sources of “Northern White” or “Ottawa” sand in the upper Midwest are the Middle and Upper Ordovician St. Peter Sandstone and the Lower Ordovician and Upper Cambrian Jordan Formation, with the Upper Cambrian Wonewoc and Mount Simon Formations gaining in importance. Additional frac sand sources to the south include the Upper Cambrian Hickory Sandstone Member of the Riley Formation in Texas, which is referred to informally as “Brown” or “Brady” sand, and the Middle Ordovician Oil Creek Formation in Oklahoma. More than 40 United States industry operators are involved in the mining, processing, transportation, and distribution of frac sand to a robust market that is fast-growing in the United States and throughout the world. In addition to the abrupt rise in frac sand mining and distribution, a new industry has emerged from the production of alternative proppants, such as coated sand and synthetic beads. Alternative proppants, developed through new technologies, are competing with supplies of natural frac sand. In the long term, the vitality of both industries will be tied to the future of hydraulic fracturing of tight oil and gas reservoirs, which will be driven by the anticipated increases in global energy consumption.

Open-File Report↗
USGS1975

Mineral deposits in western Saudi Arabia; a preliminary report

Mineral deposits in Saudi Arabia include a variety of deposits which were formed in many geologic environments. These include magmatic and late magmatic deposits in igneous masses, contact metamorphic deposits along the margins of igneous bodies, and stratiform sulfide deposits and veins. Notable deposits of sedimentary origin include deposits of iron oxides and phosphate. Strata-bound massive sulfide deposits containing copper, zinc, and nickel sulfides associated with pyrite and pyrrhotite in complexly deformed volcanic rocks in Saudi Arabia have been the subject of controversy. They are considered by some geologists to be of syngenetic or volcanogenic origin, and by others to be epigenetic. The principal mineral deposits in western Saudi Arabia are localized in mineral belts within tectonic zones that trend northerly, northeasterly, and northwesterly. These belts contain the exploration target areas most promising for future exploration. Noteworthy among these are: 1) the northerly-trending Bidah copper-zinc belt; 2) the Sayid copper-zinc zone; 3) the northwest-trending Nuqrah copper zinc-silver belt; and 4) the north-northwesterly-trending Al Amar belt. Gold and silver deposits are mainly localized in north-trending structural features of the Hijaz geotectonic cycle and northwest Najd trends. Saudi Arabian metal deposits known thus far contain reserves in the 2 billion dollar range. Further exploration should result in discoveries that could significantly increase this amount; Saudi Arabia may well have workable metallic and nonmetallic mineral resources for industrial developments in many parts of the Kingdom. In order to effectively carry on a search for new mineral deposits, the belts should be mapped in detail, with emphasis on the delineation of stratigraphic and structural features that control metallization. In addition, geochemical and geophysical studies should be made of promising areas to outline exploration targets. These targets could then be systematically explored.

Open-File Report↗
USGS2006

State summaries: Utah

The value of Utah's mineral production in 2005 was estimated to be a record $3.58 billion. This was $1.26 billion higher than the revised value of $2.32 billion for 2004. All major industry segments gained in value in 2005. In the value of nonfuel mineral production, Utah ranked fourth. The outlook for 2006 is cautiously optimistic. The value of mineral production is projected to increase slightly in 2006 due to increased production of most base and precious metals, coal and most major industrial minerals.

Mining Engineering↗
USGS1998

MAS/MILS Arc/Info point coverage for the western U.S. (excluding Hawaii)

The U.S. Geological Survey has two international and one regional digital database that contains information on mineral properties. This report describes the conversion of selected data from one of the international databases - MAS/MILS (Mineral Availability System/Mineral Industry Location System) - into a spatial data product. The MAS/MILS database, obtained from the U.S. Bureau of Mines (USBM) upon its closure, contains over 221,000 records of mineral properties and processing facilities throughout the world. However, the majority of the records in the database are of sites located in the western U.S. This is due to the extensive mineral activity that has occurred in the West, and the work done by mineral professionals in the Western, Alaska, and Intermountain Field Operations Centers of the USBM. The purpose of this project was to create a spatial coverage of the western U.S. containing mineral resource information. This coverage includes information for the states of Alaska, Arizona, California, Colorado, Idaho, Montana, Nevada, New Mexico, Oregon, Utah, Washington, and Wyoming. For this report, locations from MAS/MILS were converted to a point coverage using a geographic information system (GIS). All work was done using Arc/Info v. 7.0.4. There are 128,441 points in the coverage.

Alaska, Arizona, California, Colorado, Idaho, Mont↗
USGS2000

U.S. Geological Survey mineral databases; MRDS and MAS/MILS

These two CD-ROM's contain the latest version of the Mineral Resources Data System (MRDS) database and the Minerals Availability System/Minerals Industry Location System (MAS/MILS) database for coverage of North America and the world outside North America. The records in the MRDS database each contain almost 200 data fields describing metallic and nonmetallic mineral resources, deposits, and commodities. The records in the MAS/MILS database each contain almost 100 data fields describing mines and mineral processing plans.

Data Series↗
USGS2018

China, the United States, and competition for resources that enable emerging technologies

Historically, resource conflicts have often centered on fuel minerals (particularly oil). Future resource conflicts may, however, focus more on competition for nonfuel minerals that enable emerging technologies. Whether it is rhenium in jet engines, indium in flat panel displays, or gallium in smart phones, obscure elements empower smarter, smaller, and faster technologies, and nations seek stable supplies of these and other nonfuel minerals for their industries. No nation has all of the resources it needs domestically. International trade may lead to international competition for these resources if supplies are deemed at risk or insufficient to satisfy growing demand, especially for minerals used in technologies important to economic development and national security. Here, we compare the net import reliance of China and the United States to inform mineral resource competition and foreign supply risk. Our analysis indicates that China relies on imports for over half of its consumption for 19 of 42 nonfuel minerals, compared with 24 for the United States—11 of which are common to both. It is for these 11 nonfuel minerals that competition between the United States and China may become the most contentious, especially for those with highly concentrated production that prove irreplaceable in pivotal emerging technologies.

Proceedings of the National Academy of Sciences of↗
USGS2004

Analysis of MASTER thermal data in the Greeley area of the Front Range Urban Corridor, Colorado — Delineation of sites for infrastructure resource characterization

Sand and soils southwest of Greeley, Colorado, were characterized for mineral composition and industrial quality. Radi-ance data from the thermal channels of the MASTER simulator were calibrated using estimated atmospheric parameters. Chan-nel emissivities were approximated using an estimated ground temperature. Subsequently, a decorrelation algorithm was used to calculate inverse wave emissivity images. Six soil classes, one vegetation class, water, and several small classes were defined using an unsupervised classification algorithm. Ground covered by each of the derived emissivity spectral classes was studied using color-infrared air photos, color-infrared composite MAS-TER data, geologic maps, NASA/JPL Airborne Visible and Infra-red Imaging Spectrometer (AVIRIS) data, and field examination. Spectral classes were characterized by their responses and related to their mineral content through field examination. Classes with a minimum at channel 44, and having a similar spectral shape to quartz, field checked as containing abundant quartz. Classes with a minimum at channel 45, and having a spectral shape similar to the sheet minerals, were found in the field to contain abundant mica and clay. Sandy soil was found to have a positive slope at the longer wavelengths; the more clay rich soils had a negative slope. Spectra with a strong downturn at channel 50 generally indicated low vegetation cover, whereas an upturn indicated more vegetation cover. Mapping revealed a range of classified soils with varying amounts of quartz, silt, clay, and plant humus. Sand and gravel operations along the St. Vrain River, gravel lots, and some fields spectrally classified as quartz-rich sands were confirmed through field examination. Other fields mapped as sandy soils, ranging from quartz-rich sandy soil to quartz-rich silt-sand soil with clay. Flood plains mapped as sandy-silty-organic-rich clay. The city of Greeley contained all classes of materials, with the sand classes mapping as various types of asphalt. Abundant quartz gravel was apparent within the asphalt during field check-ing. The clay classes mapped silt-clay soils in areas of irrigated grass landscaping, some fields, and roofing materials.

Colorado↗
USGS2000

Significant deposits of gold, silver, copper, lead, and zinc in the United States

Approximately 99 percent of past production and remaining identified resources of gold, silver, copper, lead, and zinc in the United States are accounted for by deposits that originally contained at least 2 metric tonnes (t) gold, 85 t silver, 50,000 t copper, 30,000 t lead, or 50,000 t zinc. The U.S. Geological Survey, beginning with the 1996 National Mineral Resource Assessment, is systematically compiling data on these deposits, collectively known as "significant" deposits. As of December 31, 1996, the significant deposits database contained 1,118 entries corresponding to individual deposits or mining districts. Maintaining, updating, and analyzing a database of this size is much easier than managing the more than 100,000 records in the Mineral Resource Data System and Minerals Availability System/Minerals Industry Location System, yet the significant deposits database accounts for almost all past production and remaining identified resources of these metals in the United States. About 33 percent of gold, 22 percent of silver, 42 percent of copper, 39 percent of lead, and 46 percent of zinc are contained in or were produced from deposits discovered after World War II. Even within a database of significant deposits, a disproportionate share of past production and remaining resources is accounted for by a very small number of deposits. The largest 10 producers for each metal account for one third of the gold, 60 percent of the silver, 68 percent of the copper, 85 percent of the lead, and 75 percent of the zinc produced in the United States. The 10 largest deposits in terms of identified remaining resources of each of the five metals contain 43 percent of the gold, 56 percent of the silver, 48 percent of the copper, 94 percent of the lead, and 72 percent of the zinc. Identified resources in significant deposits for each metal are less than the mean estimates of resources in undiscovered deposits from the 1996 U.S. National Mineral Resource Assessment. Identified resources are roughly the same magnitude as cumulative past production. Assuming that roughly the same proportion of resources in undiscovered deposits will occur in significant deposits, a substantial number of significant deposits remain to be discovered.

Economic Geology↗
USGS2011

Cobalt mineral exploration and supply from 1995 through 2013

The global mining industry has invested a large amount of capital in mineral exploration and development over the past 15 years in an effort to ensure that sufficient resources are available to meet future increases in demand for minerals. Exploration data have been used to identify specific sites where this investment has led to a significant contribution in global mineral supply of cobalt or where a significant increase in cobalt production capacity is anticipated in the next 5 years. This report provides an overview of the cobalt industry, factors affecting mineral supply, and circumstances surrounding the development, or lack thereof, of key mineral properties with the potential to affect mineral supply. Of the 48 sites with an effective production capacity of at least 1,000 metric tons per year of cobalt considered for this study, 3 producing sites underwent significant expansion during the study period, 10 exploration sites commenced production from 1995 through 2008, and 16 sites were expected to begin production by 2013 if planned development schedules are met. Cobalt supply is influenced by economic, environmental, political, and technological factors affecting exploration for and production of copper, nickel, and other metals as well as factors affecting the cobalt industry. Cobalt-rich nickel laterite deposits were discovered and developed in Australia and the South Pacific and improvements in laterite processing technology took place during the 1990s and early in the first decade of the 21st century when mining of copper-cobalt deposits in Congo (Kinshasa) was restricted because of regional conflict and lack of investment in that country's mining sector. There was also increased exploration for and greater importance placed on cobalt as a byproduct of nickel mining in Australia and Canada. The emergence of China as a major refined cobalt producer and consumer since 2007 has changed the pattern of demand for cobalt, particularly from Africa and Australasia. Chinese companies are increasingly becoming involved in copper and cobalt exploration and mining in Congo (Kinshasa) and Zambia as well as nickel, copper, and other mining in Australia and the South Pacific. Between 2009 and 2013, mines with a cumulative capacity of more than 100,000 metric tons per year of cobalt were proposed to come into production if all sites came into production as scheduled. This additional capacity corresponds to 175 percent of the 2008 global refinery production level. About 45 percent of this cobalt would be from primary nickel deposits, about 32 percent from primary copper deposits, and about 21 percent from primary cobalt deposits. By 2013, about 40 percent of new capacity was expected to come from the African Copperbelt; 38 percent, from Australia and the South Pacific countries of Philippines, Indonesia, New Caledonia, and Papua New Guinea; 11 percent, from other African countries; 5 percent, from North America; and 6 percent, from other areas.

Scientific Investigations Report↗
USGS1946

Artificial recharge of glacial sand and gravel with filtered river water at Louisville, Kentucky

Records obtained by the Geological Survey, United States Department of the Interior, and the Geological Division, Kentucky Department of Mines and Minerals, indicate that industries at Louisville pumped about 62 million gallons of water per day from wells in 1943. This was over 20 million gallons a day more than the natural recharge to the glacial outwash sand and gravel from which the wells draw the water. The ground water is especially in demand because of its uniformly low temperature throughout the year. In order to stop the resulting serious decline of water levels and decrease in yields of wells, the pumpage is now gradually being reduced. Also, the recharge has been increased about 2 million gallons a day by introducing water into the aquifer through wells. During the spring of 1944 the Seagram and National distilleries helped solve a local shortage of ground water by recharging the underground reservoir with 1.7 million gallons a day of cold water from the municipal river-water supply. While this water was being added to the aquifer through several supply wells the plants were operated with additional city water, and the rest of the supply wells were kept idle. In this way, the large cone of depression in the water table that had been created by heavy pumping from the wells was practically filled with cold water from a combination of natural and artificial recharge. As a result, during the summer when the city water became too warm to be used in the plants, an increased and ample supply of cold water was available from the wells. It has been suggested that other industries at Louisville might adopt similar procedures for insuring adequate supplies of cold water during the summers.

Kentucky↗
USGS1992

Configuration of the base of the Edwards-Trinity aquifer system and hydrogeology of the underlying pre-Cretaceous rocks, west-central Texas

The Edwards-Trinity aquifer system is underlain by an extensive complex of rocks, ranging from Late Cambrian through Late Triassic in age, that are typically about 10 to perhaps 1,000 times less permeable than those composing the aquifer system. The Cretaceous rocks of the aquifer system are separated from the pre-Cretaceous rocks by an unconformity that spans about 60 million years of erosion during the Jurassic Period. The upper surface of the pre-Cretaceous rock complex forms the base of the Edwards-Trinity aquifer system. The configuration of the base reflects the original topography of the eroded pre-Cretaceous land surface plus the effects of subsequent deformation. The most permeable pre-Cretaceous rocks are in the eastern half of the study area where they compose the Hickory aquifer (in Upper Cambrian rocks), Ellenburger-San Saba aquifer (Upper Cambrian- Lower Ordovician), and Marble Falls aquifer (Lower Pennsylvanian). These aquifers are hydraulically connected to the northeastern fringe of the Edwards-Trinity aquifer system, as their up-turned margins crop out around the flanks of the breached Llano uplift. The Rustler aquifer in rocks of Late Permian age underlies parts of the Trans-Pecos region, where it yields small amounts of greatly mineralized water for industrial and agricultural purposes. The Dockum aquifer in rocks of Late Triassic age directly underlies the Edwards-Trinity aquifer system in western parts of the study area, and locally increases the saturated thickness of the ground-water-flow system by an average of about 200 feet. Despite these notable exceptions, the collective effect of the pre-Cretaceous rocks is that 01 a barrier to ground-water flow, which limits the exchange of water across the base of the Edwards-Trinity aquifer system.

Texas↗
USGS1964

Geology and hydrology of the West Milton area, Saratoga County, New York

This report describes the geology, ground-water conditions, streamflow characteristics, and quality of water in the West Milton area, Saratoga County, N.Y. The West Milton area is in the east-central part of New York in the hilly region that forms a transition zone between the Adirondack Mountains and the Hudson-Mohawk valley lowland. Bedrock underlying the area consists of crystalline rocks of Precambrian age and sandstone, dolomite, limestone, and shale formations of Cambrian and Ordovician age. The formations have been moderately folded and have been displaced as much as several hundred feet' along at least three northeast-trending normal faults. The bedrock is overlain in nearly all parts of the area by a layer of unconsolidated deposits which ranges in thickness from a few feet to more than 200 feet. The unconsolidated deposits are of Pleistocene age and consist of unstratified materials (till) laid down by glacial ice at stratified sediments deposited by glacial meltwaters. The topography of the bedrock surface differs greatly from the topography of the land surface. Although not evident in the present topography, at least two channels, cut in bedrock by preglacial streams, pass through the area. Ground-water supplies adequate to satisfy domestic requirements can be obtained from wells in any part of the area. Large ground-water supplies may be taken from coarse-grained stratified deposits comprising two aquifers in the valley of Kayaderosseras Creek. The Atomic Energy Commission has pumped as much as 1 mgd from a horizontal well drawing from the uppermost aquifer which is composed of flood-plain deposits. Part of the water yielded by this well during extended periods of pumping is induced flow from the creek. Three nearby vertical wells drilled by the Commission comprise a separate well field capable of yielding at least 2 mgd and possibly as much as 3 mgd from the deeper stratified deposits underlying the valley. A pumping test showed that at near the center of this well field the coefficient of transmissibility is about 125,000 gpd per ft and the coefficient of storage is about 0.0003. The water obtained from the sand and gravel has a hardness of about 125 ppm and contains about 150 ppm of dissolved solids. Most of the Government reservation is drained by Glowegee Creek, one of the larger tributaries of Kayaderosseras Creek. The average streamflow of Kayaderosseras Creek at West Milton is 141 cfs or about 1.5 cfs per sq. mi. The monthly mean discharge has ranged from a low of 21.7 cfs in September 1958 to a high of 866 cfs in March 1936, and the annual mean discharge has ranged from 94.5 cfs in 1941 to 198 cfs in 1952. The mean annual flood is 1,740 cfs and the 50-year flood is 5,300 cfs. Streamflow data have been collected on Glowegee Creek since 1948 at a station 0.5 mile south of West Milton. The average streamflow of Glowegee Creek at this station is 41 cfs or about 1.5 cfs per sq mi. The mean annual flood is 740 cfs and the 50-year flood is 2,250 cfs. The quality of the water in both Kayaderosseras Creek and Glowegee Creek is satisfactory for public supply and most industrial purposes. The mineral content of both streams is low--the dissolved-solids content averaging about 93 ppm in Kayaderosseras Creek and about 131 ppm in Glowegee Creek. The average hardness of water in Kayaderosseras Creek and Glowegee Creek is 68 ppm and 102 ppm, respectively. During periods of low flow, suspended sediment discharge in both streams is less than 10 tons per day, but during periods of high flow, the sediment discharge has been as great as 163 tons per day in Glowegee Creek and 437 tons per day in Kayaderosseras Creek.

Water Supply Paper↗
USGS1986

Minerals, lands, and geology for the common defence and general welfare, Volume 3, 1904-1939 : A history of geology in relation to the development of public-land, federal-science, and mapping policies and the development of mineral resources in the United States from the 25th to the 60th year of the U.S. Geological Survey

Mrs. Rabbitt's third volume covers the years 1904 to 1939, from the beginning of the conservation movement under Theodore Roosevelt to the beginning of World War II. From a national perspective, these were years of great development and change in the use of energy, trouble in the coal industry, and a great expansion in the oil industry. They were also years in which the public perceived for the first time that the Nation's mineral resources are not infinite, and the mineral industry realized its dependence on international trade. In these years, water became an increasingly valuable commodity, and the need for a national mapping program became abundantly evident. These were also the years when the Federal Government for the most part practiced stringent economy in funding science, but State and municipal agencies increasingly sought the services of the Survey's topographic and water specialists to aid in the solution of local problems. The balance maintained between fundamental and practical research during the first 25 years was more than once upset during the next 25 years, but the successful struggle to maintain a significant level of research laid the groundwork for the tremendous expansion in the Survey in the subsequent years.

Book↗
USGS2017

Mineral supply for sustainable development requires resource governance

Successful delivery of the United Nations sustainable development goals and implementation of the Paris Agreement requires technologies that utilize a wide range of minerals in vast quantities. Metal recycling and technological change will contribute to sustaining supply, but mining must continue and grow for the foreseeable future to ensure that such minerals remain available to industry. New links are needed between existing institutional frameworks to oversee responsible sourcing of minerals, trajectories for mineral exploration, environmental practices, and consumer awareness of the effects of consumption. Here we present, through analysis of a comprehensive set of data and demand forecasts, an interdisciplinary perspective on how best to ensure ecologically viable continuity of global mineral supply over the coming decades.

Nature↗