Search USGSSearch

SEARCH · Search USGS

Results for “Earth in Space”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16Linked to original sources

Map projections used by the U.S. Geological Survey

After decades of using only one map projection, the Polyconic, for its mapping program, the U.S. Geological Survey (USGS) now uses sixteen of the more comnon map projections for its published maps. For larger scale maps, including topographic quadrangles and the State Base Map Series, conformal projections such as the Transverse Mercator and the Lambert Conformal Conic are used. On these, the shapes of small areas are shown correctly, but scale is correct only along one or two lines. Equal-area projections, especially the Albers Equal-Area Conic, and equidistant projections which have correct scale along many lines appear in the National Atlas. Other projections, such as the Miller Cylindrical and the Van der Grinten, are chosen occasionally for convenience, sometimes making use of existing base maps prepared by others. Some projections treat the Earth only as a sphere, others as either ellipsoid or sphere. The USGS has also conceived and designed several new projections, icluding the Space Oblique Mercator, the first map projection designed to permit mapping of the Earth continuously from a satellite with low distortion. The mapping of extraterrestrial bodies has resulted in the use of standard projections in completely new settings. With increased computerization, it is important to realize that rectangular coordinates for all these projections may be mathematically calculated with formulas which would have seemed too complicated in the past, but which now may be programed routinely, if clearly delineated with numerical examples. A discussion of appearance, usage, and history is given together with both forward and inverse equations for each projection involved.

Bulletin

System characterization report on the German Aerospace Center (DLR) Earth Sensing Imaging Spectrometer (DESIS)

Executive Summary This report addresses system characterization of the German Aerospace Center (DLR) Earth Sensing Imaging Spectrometer (DESIS) and is part of a series of system characterization reports produced and delivered by the U.S. Geological Survey Earth Resources Observation and Science Cal/Val Center of Excellence. These reports present the methodology and procedures for characterization and the technical and operational information about the specific sensing system being evaluated. These reports also provide a description of data measurements, data retention practices, and data analysis results and provide system characterization conclusions. In partnership with Teledyne Brown Engineering, DLR built the DESIS hyperspectral instrument, which Teledyne Brown Engineering then integrated onto its International Space Station-based imaging platform, the Multi-User System for Earth Sensing. DLR developed the processing software and, together with Innovative Imaging and Research, completes the validation and calibration of the data products. DESIS was launched in 2018, and the data are used for scientific research in atmospheric physics and Earth sciences. The DESIS sensor contributes to the scientific and commercial utilization of the International Space Station and helps to further hyperspectral remote sensing technologies for future satellites. More information on DLR satellites and sensors is included within the “2020 Joint Agency Commercial Imagery Evaluation—Remote Sensing Satellite Compendium” and at https://www.dlr.de/DE/Home/home_node.html . The Earth Resources Observation and Science Cal/Val Center of Excellence system characterization team completed data analyses to characterize the geometric (interior and exterior), radiometric, and spatial performances. Results of these analyses indicate that DESIS has an interior geometric performance of less than a 3.30-meter (less than 0.11 pixel) root mean square error in band-to-band registration, an exterior geometric performance in the range of a 2.40- (0.08 pixel) to 17.40-meter (0.58 pixel) offset in comparison to the Landsat 8 Operational Land Imager, a radiometric performance in the range of −0.013 to 1.011 (offset and slope), and a spatial performance for band 130 of 1.5 pixels at full width at half maximum, with a modulation transfer function at a Nyquist frequency of 0.167.

Open-File Report

Establishing the Antarctic Dome C community reference standard site towards consistent measurements from Earth observation satellites

Establishing satellite measurement consistency by using common desert sites has become increasingly more important not only for climate change detection but also for quantitative retrievals of geophysical variables in satellite applications. Using the Antarctic Dome C site (75°06′S, 123°21′E, elevation 3.2 km) for satellite radiometric calibration and validation (Cal/Val) is of great interest owing to its unique location and characteristics. The site surface is covered with uniformly distributed permanent snow, and the atmospheric effect is small and relatively constant. In this study, the long-term stability and spectral characteristics of this site are evaluated using well-calibrated satellite instruments such as the Moderate Resolution Imaging Spectroradiometer (MODIS) and Sea-viewing Wide Field-of-view Sensor (SeaWiFS). Preliminary results show that despite a few limitations, the site in general is stable in the long term, the bidirectional reflectance distribution function (BRDF) model works well, and the site is most suitable for the Cal/Val of reflective solar bands in the 0.4–1.0 µm range. It was found that for the past decade, the reflectivity change of the site is within 1.35% at 0.64 µm, and interannual variability is within 2%. The site is able to resolve calibration biases between instruments at a level of ~1%. The usefulness of the site is demonstrated by comparing observations from seven satellite instruments involving four space agencies, including OrbView-2–SeaWiFS, Terra–Aqua MODIS, Earth Observing 1 (EO-1) – Hyperion, Meteorological Operational satellite programme (MetOp) – Advanced Very High Resolution Radiometer (AVHRR), Envisat Medium Resolution Imaging Spectrometer (MERIS) – dvanced Along-Track Scanning Radiometer (AATSR), and Landsat 7 Enhanced Thematic Mapper Plus (ETM+). Dome C is a promising candidate site for climate quality calibration of satellite radiometers towards more consistent satellite measurements, as part of the framework for climate change detection and data quality assurance for the Global Earth Observation System of Systems (GEOSS).

Canadian Journal of Remote Sensing

The ASTER data system: An overview of the data products in Japan and in the United States

The Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER) data system is a cooperative system, which is operated jointly by Japan’s Ministry of Economy, Trade, and Industry (METI) through its Earth Remote Sensing Data Analysis Center (ERSDAC), and by the National Aeronautics and Space Administration (NASA) primarily through its Goddard Space Flight Center (GSFC) and Land Processes (LP) Distributed Active Archive Center (DAAC). ASTER is a moderate-resolution land remote sensing system onboard the Earth Observing System (EOS) Terra spacecraft. ASTER-acquired data are received at the White Sands, New Mexico, ground receiving station, and then transmitted via land network to the EOS Data and Operations System (EDOS) within the Goddard DAAC, located at the GSFC. EDOS pre-processes raw ASTER data to Level-0 (L0) data, and sends them via the high-speed Asia-Pacific Advanced Network (APAN) to the ASTER Ground Data System (GDS) in Japan. ASTER GDS processes the L0 data to level-1 (L1) datasets; they distribute these data to users, and also use them to generate higher-level products for their user community. ASTER GDS sends a copy of all L1A data they produce to NASA’s LP DAAC, located at the U.S. Geological Survey’s Center for Earth Resources Observation and Science (EROS) near Sioux Falls, South Dakota. All L1 data received from Japan are ingested, archived, and available for users at LP DAAC. The LP DAAC also generates and distributes higher-level products from L1 data based on requests from users. To meet time-critical needs related to sensor health and performance, natural disasters, national emergencies, and certain field campaigns, the ASTER Expedited Data System (EDS) was developed, and is operated jointly by U.S. and Japanese partners.

Book chapter

Archiving and access systems for remote sensing: Chapter 6

Focuses on major developments inaugurated by the Committee on Earth Observation Satellites, the Group on Earth Observations System of Systems, and the International Council for Science World Data System at the global level; initiatives at national levels to create data centers (e.g. the National Aeronautics and Space Administration (NASA) Distributed Active Archive Centers and other international space agency counterparts), and non-government systems (e.g. Center for International Earth Science Information Network). Other major elements focus on emerging tool sets, requirements for metadata, data storage and refresh methods, the rise of cloud computing, and questions about what and how much data should be saved. The sub-sections of the chapter address topics relevant to the science, engineering and standards used for state-of-the-art operational and experimental systems.

Book chapter

Demonstrating the value of Earth observations—methods, practical applications, and solutions—group on Earth observations side event proceedings

Executive Summary The U.S. Geological Survey, the National Oceanic and Atmospheric Administration, the European Association for Remote Sensing Companies, and the European Space Agency in coordination with the GEOValue Community hosted a side event to the Group on Earth Observations Plenary on October 23–24, 2017, in Washington, D.C. The workshop, entitled “Demonstrating the Value of Earth Observations: Methods, Practical Applications and Solutions,” brought together more than 60 international experts including economists, scientists, and engineers to consider the state of the science and applications of valuing Earth observations (EO). This 2-day workshop built upon previous activities developed under the GEOValue initiative. This workshop brought together expert analysts from multiple disciplines and backgrounds who are developing methods to identify and measure the value of information generated from the use of satellite and in-situ data. The mix of government agencies, international financial institutions, and independent consultants who participated in the workshop blended to develop a rich mix of views, approaches, and outcomes. During the first part of the workshop, the focus was on the latest science in valuing EO. A number of methodologies were described. Approaches generally assess the societal benefits of specific actions (for example, investments in EO). Some methods focus on broad measures of economic activity (for example, gross domestic product) or methods to assess total economic value such as contingent valuation surveys. Alternatively, use-case approaches (a use case is defined as an evaluation in which one or more decisions, applications, or other uses of data, information, and information products are specifically considered) start with the specific actions and how information is used to support decision making and affect outcomes. The second part of the meeting was focused on the use and development of value chains and decision trees. A value chain can be defined as the set of value-adding activities that one or more organizations perform in creating and distributing goods and services. In terms of EO, the value chain approach can be applied to consider societal benefits of the data and assess the value of data and data features. The EO value chain considers the geospatial data sources and the processing of the data into value added information to be incorporated into decision-support systems, leading to decision makers’ actions. To understand the value of EO, one would also need to recognize the demand side of the equation or how EO benefits users. Extending the value chain concept and incorporating tenets of Bayesian decision making, a decision tree would include one or more use cases. The value provided by the marginal increase in information could flow from one or several parts of the supply side of the value chain. The decision tree is based on the premise that information has no value if it is not used in at least one decision. By connecting the value chain and the decision tree, a framework is created that allows for conceptualizing the value of EO in its many uses. One can then apply economic techniques to monetize the marginal benefit of an outcome with information versus one without. A third part of the meeting applied the value chain and decision-tree frameworks to five specific thematic areas, each with the focus of using information for a decision point: Effect of increasing temperatures on human health; Flooding—Mitigating, managing, and avoiding impacts to safety and property damage; Harmful algal blooms—Effects on human health, recreation, and tourism; Energy and mineral supply—Mitigating, managing, and avoiding impacts of shortfalls on the economy; and Effects of natural hazards on transportation systems—Effects on mobility, safety, and the economy. During the working session, five separate groups worked to define and delineate the value chains and decision trees associated with each topic, discussing the related challenges and data needs. The outcomes were reported back to the full group. Because of the complexity of the topics, most groups first identified a network of value chains and then narrowed the scope to develop a single value chain to address their group’s topic. Although they worked separately and on different topics, the groups came to similar conclusions, concurring that the value chain and decision-tree frameworks are very effective for informing quantitative impact assessments and developing a relatable narrative to assist the public in understanding the link between EO and citizens.

Open-File Report

Measuring human-induced land subsidence from space

Satellite Interferometric Synthetic Aperture Radar (InSAR) is a revolutionary technique that allows scientists to measure and map changes on the Earth's surface as small as a few millimeters. By bouncing radar signals off the ground surface from the same point in space but at different times, the radar satellite can measure the change in distance between the satellite and ground (range change) as the land surface uplifts or subsides. Maps of relative ground-surface change (interferograms) are constructed from the InSAR data to help scientists understand how ground-water pumping, hydrocarbon production, or other human activities cause the land surface to uplift or subside. Interferograms developed by the USGS for study areas in California, Nevada, and Texas are used in this fact sheet to demonstrate some of the applications of InSAR to assess human-induced land deformation

Fact Sheet

What a difference a day makes: When and where are daily satellite observations of morphology and deformation needed during volcanic eruptions and unrest?

Daily high-spatial-resolution satellite imagery at active volcanoes could be used to anticipate eruptions and save lives, but is only rarely available or used in real time. Specifically, daily repeat coverage of ground deformation, topography, and surface morphology at volcanoes is now possible using high-spatial resolution optical and radar imagery (< 10 m/pixel). However, multiple satellites are needed—either constellations of four or more sibling satellites or a “virtual constellation” using several different types of satellites. As part of the Global Volcano Early Warning and Eruption Response from Space (G-VEWERS) project of the Committee on Earth Observation Satellites (CEOS), we review case studies at both erupting and restless volcanoes to identify scenarios where near-daily radar (both backscatter images and interferometric products) or optical data captured noteworthy changes, including Merapi and Mount Agung, Indonesia; La Soufrière, St. Vincent; Colima, Mexico; Kīlauea, Hawaiʻi; and Fagradalsfjall, Iceland. Finally, we consider the resources needed to scale this globally. There are 40–50 volcanoes erupting at any given time, but currently only about 10% have daily imaging at high-spatial-resolution. The allocations of high-spatial-resolution imagery available through G-VEWERS and other open datasets (~10,000 scenes/year) are < 60% of what is needed (~17,000 scenes/year) for daily imaging of all restless and erupting volcanoes. We therefore propose criteria to prioritize where daily satellite high-spatial-resolution observations may be useful continuously or under emergency conditions based on the threat and the type of volcano/eruption.

Bulletin of Volcanology

Snow surface roughness across spatio-temporal scales

The snow surface is at the interface between the atmosphere and Earth. The surface of the snowpack changes due to its interaction with precipitation, wind, humidity, short- and long-wave radiation, underlying terrain characteristics, and land cover. These connections create a dynamic snow surface that impacts the energy and mass balance of the snowpack, blowing snow potential, and other snowpack processes. Despite this, the snow surface is generally considered a constant parameter in many Earth system models. Data from the National Aeronautics and Space Administration (NASA) Cold Land Processes Experiment (CLPX) collected in 2002 and 2003 across northern Colorado were used to investigate the spatial and temporal variability of snow surface roughness. The random roughness (RR) and fractal dimension (D) metrics used in this investigation are well correlated. However, roughness is not correlated across scales, computed here from snow roughness boards at a millimeter resolution and airborne lidar at a meter resolution. Process scale differences were found based on land cover at each of the two measurement scales, as appraised through measurements in the forest and alpine.

Colorado

Overview of the land analysis system (LAS)

The Land Analysis System (LAS) is a fully integrated digital analysis system designed to support remote sensing, image processing, and geographic information systems research. LAS is being developed through a cooperative effort between the National Aeronautics and Space Administration Goddard Space Flight Center and the U. S. Geological Survey Earth Resources Observation Systems (EROS) Data Center. LAS has over 275 analysis modules capable to performing input and output, radiometric correction, geometric registration, signal processing, logical operations, data transformation, classification, spatial analysis, nominal filtering, conversion between raster and vector data types, and display manipulation of image and ancillary data. LAS is currently implant using the Transportable Applications Executive (TAE). While TAE was designed primarily to be transportable, it still provides the necessary components for a standard user interface, terminal handling, input and output services, display management, and intersystem communications. With TAE the analyst uses the same interface to the processing modules regardless of the host computer or operating system. LAS was originally implemented at EROS on a Digital Equipment Corporation computer system under the Virtual Memorial System operating system with DeAnza displays and is presently being converted to run on a Gould Power Node and Sun workstation under the Berkeley System Distribution UNIX operating system.

Conference Paper

System characterization report on Resourcesat-2A Advanced Wide Field Sensor

Executive Summary This report documents the system characterization of the Indian Space Research Organisation Resourcesat-2A Advanced Wide Field Sensor (AWiFS) and is part of a series of system characterization reports produced by the U.S. Geological Survey Earth Resources Observation and Science Cal/Val Center of Excellence. These reports describe the methodology and procedures used for characterization, present technical and operational information about the specific sensing system being evaluated, and provide a summary of test measurements, data retention practices, data analysis results, and conclusions. Resourcesat-2A was launched in 2016 on the Polar Satellite Launch Vehicle-C36; it is identical to Resourcesat-2, and together, they decrease imaging revisit time from 5 days to 2–3 days, providing data continuity and improved temporal resolution. Resourcesat-2 and -2A carry the AWiFS, Linear Imaging Self Scanning-3, and Linear Imaging Self Scanning-4 medium-resolution imaging sensors, continuing the legacy of the Indian Space Research Organisation’s Indian Remote Sensing-1C/1D/P3 satellite programs. More information about Indian Space Research Organisation satellites and sensors is available through the Joint Agency Commercial Imagery Evaluation Earth Observing Satellites Online Compendium and from the Indian Space Research Organisation at https://www.isro.gov.in/ . The Earth Resources Observation and Science Cal/Val Center of Excellence system characterization team assessed the geometric, radiometric, and spatial performance of the Resourcesat-2A AWiFS sensor. Geometric performance is divided into the interior geometric performance of band-to-band registration and the exterior geometric performance of geolocation accuracy. The interior geometric performance had offsets in the range of −1.10 meters (m; −0.020 pixel) to 3.67 m (0.066 pixel) in easting and −5.68 m (−0.101 pixel) to 10.38 m (0.185 pixel) in northing with root mean square error values from 5.60 m (0.100 pixel) to 11.31 m (0.202 pixel) in easting and from 3.00 m (0.054 pixel) to 13.52 m (0.241 pixel) in northing. The exterior geometric performance had mean offsets of −25.29 m in easting and 16.22 m northing with root mean square error values of 26.07 m in easting and 17.60 m in northing compared to the Landsat 8 Operational Land Imager sensor. The radiometric performance had offsets from −0.002 to 0.029 and slopes from 0.733 to 1.012. Spatial performance was in the range of 1.354 to 1.639 pixels for full width at half maximum with a modulation transfer function at a Nyquist frequency in the range of 0.108 to 0.174.

Open-File Report

Earth as art 4

Landsat 8 is the latest addition to the long-running series of Earth-observing satellites in the Landsat program that began in 1972. The images featured in this fourth installment of the Earth As Art collection were all acquired by Landsat 8. They show our planet’s diverse landscapes with remarkable clarity. Landsat satellites see the Earth as no human can. Not only do they acquire images from the vantage point of space, but their sensors record infrared as well as visible wavelengths of light. The resulting images often reveal “hidden” details of the Earth’s land surface, making them invaluable for scientific research. As with previous Earth As Art exhibits, these Landsat images were selected solely for their aesthetic appeal. Many of the images have been manipulated to enhance color variations or details. They are not intended for scientific interpretation—only for your viewing pleasure. What do you see in these unique glimpses of the Earth’s continents, islands, and coastlines?

General Information Product

System characterization report on the Earth Surface Mineral Dust Source Investigation (EMIT) sensor

Executive Summary This report addresses system characterization of the Earth Surface Mineral Dust Source Investigation (EMIT) sensor, an imaging spectrometer developed by the National Aeronautics and Space Administration. This report is part of a series of system characterization reports produced and delivered by the U.S. Geological Survey Earth Resources Observation and Science Cal/Val Center of Excellence. These reports present and detail the methodology and procedures for characterization; present technical and operational information about the specific sensing system being evaluated; and provide a summary of test measurements, data retention practices, data analysis results, and conclusions. The Earth Resources Observation and Science Cal/Val Center of Excellence system characterization team completed data analyses to characterize the geometric (interior and exterior) and radiometric performances. Results of these analyses indicate that the EMIT sensor has a band-to-band geometric performance in the range of −0.355 to 0.210 pixel with a few exceptions of shortwave infrared channels. Geometric offset relative to the Landsat 8 Operational Land Imager ranged from −15.966 meters (−0.266 pixel) to 43.844 meters (0.731 pixel). Offset of a radiometric comparison ranged from −0.016 to 0.025, and slope of a radiometric comparison ranged from 0.837 to 0.985. EMIT agreed with Radiometric Calibration Network measurements within 5 percent across most of the spectral channels.

Open-File Report

Shuttle Radar Topography Mission (SRTM)

Under an agreement with the National Aeronautics and Space Administration (NASA) and the Department of Defense's National Geospatial-Intelligence Agency (NGA), the U.S. Geological Survey (USGS) is distributing elevation data from the Shuttle Radar Topography Mission (SRTM). The SRTM is a joint project of NASA and NGA to map the Earth's land surface in three dimensions at an unprecedented level of detail. As part of space shuttle Endeavour's flight during February 11-22, 2000, the SRTM successfully collected data over 80 percent of the Earth's land surface for most of the area between latitudes 60 degrees north and 56 degrees south. The SRTM hardware included the Spaceborne Imaging Radar-C (SIR-C) and X-band Synthetic Aperture Radar (X-SAR) systems that had flown twice previously on other space shuttle missions. The SRTM data were collected with a technique known as interferometry that allows image data from dual radar antennas to be processed for the extraction of ground heights.

Fact Sheet

New papers related to remote sensing of the earth

Worldwide experience of many individuals and organizations with remote sensing data acquired from space, primarily Landsat-1, -2, and -3, has demonstrated its utility for land use classification, agricultural assessment, energy and resource exploration, and many other applications. There has been some reluctance to adopt these systems in operational programmes because of a lack of assured continuity of data collection, continuing changes in the systems, and some dissatisfaction with the types of data made available to users. Nevertheless, there is sufficient conviction of the value of satellite remote sensing so that new systems will be developed by several countries in the decade of the 1980's. The status changes continuously as studies are completed, and budgets are adjusted. This review presents the situation at the beginning of 1982.

Open-File Report

CLICK: The new USGS center for LIDAR information coordination and knowledge

Elevation data is rapidly becoming an important tool for the visualization and analysis of geographic information. The creation and display of three-dimensional models representing bare earth, vegetation, and structures have become major requirements for geographic research in the past few years. Light Detection and Ranging (lidar) has been increasingly accepted as an effective and accurate technology for acquiring high-resolution elevation data for bare earth, vegetation, and structures. Lidar is an active remote sensing system that records the distance, or range, of a laser fi red from an airborne or space borne platform such as an airplane, helicopter or satellite to objects or features on the Earth&rsquo;s surface. By converting lidar data into bare ground topography and vegetation or structural morphologic information, extremely accurate, high-resolution elevation models can be derived to visualize and quantitatively represent scenes in three dimensions. In addition to high-resolution digital elevation models (Evans et al., 2001), other lidar-derived products include quantitative estimates of vegetative features such as canopy height, canopy closure, and biomass (Lefsky et al., 2002), and models of urban areas such as building footprints and three-dimensional city models (Maas, 2001).

Photogrammetric Engineering and Remote Sensing

Hydrological and thermal response of lakes to climate: Description and modeling

Lake systems continually respond to climatic conditions that vary over broad scales of space and time. The spatial distribution of lakes on the Earth’s surface is indicative of long-term patterns of atmospheric circulation, and the annual cycle of climate over lake basins is reflected in seasonal change in the size and temperature of lakes. Lake size is determined by the balance of water inputs and outputs, and lake temperature is governed by the balance of heat inputs and outputs. The lake hydrological and energy balances are coupled to the atmosphere. In response to the inputs of mass, energy, and momentum (precipitation, radiation, and wind stress), lakes return heat and moisture to the atmosphere through conduction and evaporation. Global, regional, or local change in the hydrological or thermal states of lakes thus represent interactive responses to climatic variation in the supply of water and energy.

Book chapter

Coastal landforms and processes at the Cape Cod National Seashore, Massachusetts—A primer

Anyone who spends more than a few days on Cape Cod (the Cape) quickly becomes a coastal geologist, quickly learning the rhythms of daily tides and the seasonal cycles of beaches growing and being swept away by storms; swimmers and surfers track how the breakers appear, and dog-walkers notice the hard-packed sand blanketed overnight by an airy layer that leaves deep labored tracks. Careful observers whose paths wander to the ocean&rsquo;s edge will observe many of the landforms and coastal processes described in this book and if we have done our job well, the stories told here will seem familiar. Watchful experience brings insights; indeed, this is how scientists and perhaps how artists work, describing patterns that explain and predict. When is the next high tide? What will the winter bring? Where do we build, fish, swim? How do wind and waves offshore in the North Atlantic help arrange the plants and dunes and hollows on the beach? And most of all, as human animals drawn to live and play on the edge of the ocean, how do we get the benefits of this complex natural system of geology and biology? How do we affect coastal processes; how is the coast changing now and how is the coast likely to change in years ahead with climate warming and climate change? This book is about the highly dynamic coastal landforms of Cape Cod&mdash;the beaches, bluffs, spits, dunes, barrier beaches, estuaries, and salt marshes. What they are, why they are where they are, how they behave with respect to the greater Cape Cod coastal system&mdash;how the landforms respond to day-to-day and long-term geologic processes, such as waves and currents, change in sediment transport, relative sea-level rise, and meteorological processes such as hurricanes, nor&rsquo;easters, and cold front passages. It is also about how the landforms got to be where they are and the way they are and where they are headed in the near future with the predicted effects of global climate warming and change. Our objective is to provide a single source of understandable and readable scientific information for those who live, play, and work on outer Cape Cod and at the Cape Cod National Seashore, as well as to provide an introduction to Cape Cod&rsquo;s coastal landforms for anyone with an interest in Earth science and nature who wants a better understanding of coastal systems and processes. Basic to an understanding of coastal landforms is the fact that they work together&mdash;they interact&mdash;as elements of many systems, and therefore our ultimate concern is not the individual landform itself but rather the geologic systems that make up Cape Cod and the Cape Cod National Seashore. Much of this discussion can be applied as well to Nantucket, Martha&rsquo;s Vineyard, and other coastal regions. The coast of outer Cape Cod, about 15,000 years old and about 30 miles (mi; 50 kilometers [km]) long, is but a tiny piece of the global Earth system that operates within a much larger realm of space and time. Cape Cod&rsquo;s coastal landforms are temporary holding patterns within a continual interplay of land, sea, atmosphere, climate, ice, and life, including a variety of human activities that both affect and are affected by these processes. These interactions produce the landforms, and the landforms alter the interactions. The resulting landforms provide habitats for a wide variety of coastal plants and animals. The habitats along with their inhabitants and the interacting environmental factors controlling them constitute the Cape&rsquo;s complex and varied ecosystems. But for now, we are here to enjoy it. We welcome you to delight and wonder at the perpetually changing handshake between the ocean and shore at New England&rsquo;s Great Beach.

Massachusetts