Search USGSSearch

SEARCH · Search USGS

Results for “Earth Interactions”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16Linked to original sources

The petrogenesis of felsic calc-alkaline magmas from the southernmost Cascades, California: Origin by partial melting of basaltic lower crust

The majority of felsic rocks from composite centers in the southernmost Cascades have geochemical and Sr, Nd and Pb isotopic ratios that suggest derivation by partial melting of lower crust that is compositionally similar to calc-alkaline basalts observed in the region. Only a few felsic rocks have δ 18 O and Pb isotopic compositions that indicate interaction with the upper crust. Mineralogical and geochemical differences among the felsic magmas result primarily from melting under variable f (H 2 O) and temperature conditions. Partial melting under low f (H 2 O) and high temperature conditions leaves an amphibole-poor residuum, and produces magmas that have orthopyroxene as the most abundant ferromagnesian phenocryst, relatively low silica contents, and straight rare earth element patterns. Partial melting under higher f (H 2 O) and lower temperature conditions leaves an amphibole-rich residuum, and produces magmas that have amphibole ± biotite phenocrysts, relatively high silica contents, and pronounced middle rare earth element depletions. These conclusions are consistent with published thermal models that suggest that reasonable volumes of basaltic magma emplaced beneath large composite centers in the southernmost Cascades can serve as the heat source for melting of the lower crust. Melting of the lower crust under variable f (H 2 O) conditions is likely to result from differences in the H 2 O contents of these basaltic magmas.

Journal of Petrology

Geology, geochemistry, geophysics, mineral occurrences, and mineral resource assessment for the Commonwealth of Puerto Rico

The Commonwealth of Puerto Rico has been investigated over a very long period of time by earth scientists from many disciplines and with diverse objectives in the studies. This publication attempts to apply much of the geologic, geochemical, geophysical, and mineral occurrence information to a single objective focused on producing a mineral resource assessment for the Commonwealth of Puerto Rico. However, the value of this publication lies not within the results of the mineral resource assessment nor within the interactive PDF files which can be viewed on the screen, but within the geologic, geochemical, geophysical, and mineral occurrence digital map coverages and databases which can be used for their own unique applications. The mineral resource assessment of Puerto Rico represents compilation of several decades of mineral investigations and studies. These investigations have been the joint efforts of the U.S. Geological Survey, the Puerto Rico Department of Natural Resources, and the University of Puerto Rico. This report contains not only the mineral-resource assessment, but also much of the scientific evidence upon which the assessment was based.

Puerto Rico

Interactive terrain visualization enables virtual field work during rapid scientific response to the 2010 Haiti earthquake

The moment magnitude (M w ) 7.0 12 January 2010 Haiti earthquake is the first major earthquake for which a large-footprint LiDAR (light detection and ranging) survey was acquired within several weeks of the event. Here, we describe the use of virtual reality data visualization to analyze massive amounts (67 GB on disk) of multiresolution terrain data during the rapid scientific response to a major natural disaster. In particular, we describe a method for conducting virtual field work using both desktop computers and a 4-sided, 22 m 3 CAVE immersive virtual reality environment, along with KeckCAVES (Keck Center for Active Visualization in the Earth Sciences) software tools LiDAR Viewer, to analyze LiDAR point-cloud data, and Crusta, for 2.5 dimensional surficial geologic mapping on a bare-earth digital elevation model. This system enabled virtual field work that yielded remote observations of the topographic expression of active faulting within an ∼75-km-long section of the eastern Enriquillo–Plantain Garden fault spanning the 2010 epicenter. Virtual field observations indicated that the geomorphic evidence of active faulting and ancient surface rupture varies along strike. Landform offsets of 6–50 m along the Enriquillo–Plantain Garden fault east of the 2010 epicenter and closest to Port-au-Prince attest to repeated recent surface-rupturing earthquakes there. In the west, the fault trace is well defined by displaced landforms, but it is not as clear as in the east. The 2010 epicenter is within a transition zone between these sections that extends from Grand Goâve in the west to Fayette in the east. Within this transition, between L'Acul (lat 72°40′W) and the Rouillone River (lat 72°35′W), the Enriquillo–Plantain Garden fault is undefined along an embayed low-relief range front, with little evidence of recent surface rupture. Based on the geometry of the eastern and western faults that show evidence of recent surface rupture, we propose that the 2010 event occurred within a stepover that appears to have served as a long-lived boundary between rupture segments, explaining the lack of 2010 surface rupture. This study demonstrates how virtual reality–based data visualization has the potential to transform rapid scientific response by enabling virtual field studies and real-time interactive analysis of massive terrain data sets.

Geosphere

EAARL-B coastal topography: Fire Island, New York, pre-Hurricane Sandy, 2012: seamless (bare earth and submerged)

These remotely sensed, geographically referenced elevation measurements of lidar-derived seamless (bare-earth and submerged) topography datasets were produced by the U.S. Geological Survey (USGS), St. Petersburg Coastal and Marine Science Center, St. Petersburg, Florida. This project provides highly detailed and accurate datasets for part of Fire Island, New York, acquired pre-Hurricane Sandy on October 27, 2012. The datasets are made available for use as a management tool to research scientists and natural-resource managers. An innovative airborne lidar, known as the second-generation Experimental Advanced Airborne Research Lidar (EAARL-B), was used during data acquisition. The EAARL-B system is a raster-scanning, waveform-resolving, green-wavelength (532-nm) lidar designed to map near-shore bathymetry, topography, and vegetation structure simultaneously. The EAARL-B sensor suite includes the raster-scanning, water-penetrating full-waveform adaptive lidar, down-looking red-green-blue (RGB) and infrared (IR) digital cameras, two precision dual-frequency kinematic carrier-phase GPS receivers, and an integrated miniature digital inertial measurement unit, which provide for sub-meter georeferencing of each laser sample. The nominal EAARL-B platform is a twin-engine Cessna 310 aircraft, but the instrument may be deployed on a range of light aircraft. A single pilot, a lidar operator, and a data analyst constitute the crew for most survey operations. This sensor has the potential to make significant contributions in measuring sub-aerial and submarine coastal topography within cross-environmental surveys. Elevation measurements were collected over the survey area using the EAARL-B system. The resulting data were then processed using the Airborne Lidar Processing System (ALPS), a custom-built processing system developed originally in a NASA-USGS collaboration. The exploration and processing of lidar data in an interactive or batch mode is supported using ALPS. Modules for presurvey flight-line definition, flight-path plotting, lidar raster and waveform investigation, and digital camera image playback have been developed. Processing algorithms have been developed to extract the range to the first and last significant return within each waveform. The Airborne Lidar Processing System (ALPS) is used routinely to create maps that represent submerged or sub-aerial topography. Specialized filtering algorithms have been implemented to determine the "bare earth" under vegetation from a point cloud of last return elevations. For more information about similar projects, please visit the Lidar for Science and Resource Management Web site.

New York

Brittle regime slip partitioned damage and deformation mechanisms along the eastern Denali fault zone in southwestern, Yukon

Rare bedrock exposures of the eastern Denali fault zone in southwestern Yukon allow for the measurement, sampling, and analyses of brittle regime fault slip data and deformation mechanisms to explore relations to far field, oblique plate motions. Host rock lithologies and associated slip surfaces show episodic damage zone‐related deformation and calcite ± hematite ± chlorite related hydrothermal fluid flow. This regional scale network of asymmetric fault damage is spatially and kinematically linked to a discrete and narrow fault core. Fault network observations, orientations, slip data, and strain inversions document a slip partitioned strike‐slip fault system with locally and mutually overprinting strike‐, oblique‐, and dip‐slip components. Microstructural analyses reveal crystal plastic and co‐seismic brittle deformation mechanisms active in a narrow range of upper crustal temperature, pressure, fluid, and chemical conditions. The net damage related slip is not exclusively formed by a single kinematic system, but rather a fully partitioned, time integrated system likely operative for much of the fault's brittle regime evolution temporally constrained by previously published thermochronometric data. Although the fault slip data was collected from outcrop‐scale exposures at sites tens of kilometers apart, results show remarkable correlation between fault kinematics and plate motions along the ∼580 km long eastern Denali fault segment. End member, subhorizontal, northeast directed reverse and north directed dextral strike slip fault strain axes closely reflect relative plate motion interactions over at least the last 30 m.y. and act as a proxy for far‐field stresses compatible with the kinematics of the damage zone network.

Alaska

The nature of the crust in the Yukon-Koyukuk province as inferred from the chemical and isotopic composition of five Late Cretaceous to Early Tertiary volcanic fields in western Alaska

Late Cretaceous and early Tertiary volcanic and plutonic rocks in western Alaska comprise a vast magmatic province extending from the Alaska Range north to the Arctic Circle, south to Bristol Bay, and west to the Bering Sea Shelf. The chemical and isotopic composition of five of these Late Cretaceous to early Tertiary volcanic fields in the north central part of this province were studied to determine if Paleozoic or older continental crust underlies the Yukon-Koyukuk province. Three of the fields, the Blackburn Hills, Yukon River, and Kanuti, occur within the Yukon-Koyukuk province and two, the Sischu and Nowitna, overlie bordering Precambrian and Paleozoic metamorphic terranes to the southeast. High initial 87 Sr/ 86 Sr of 0.7075–0.7079 and moderate initial 143 Nd/ 144 Nd of 0.51244–0.51247 of rhyolite, dacite, and high-silica andesite of the Sischu volcanic field indicate that the magmas have interacted with the underlying Paleozoic or older continental crust. The relatively limited variation of isotopic (initial 87 Sr/ 86 Sr = 0.7044–0.7051; initial 143 Nd/ 144 Nd = 0.51256–0.51257) and elemental compositions of andesites from the Nowitna field can be accounted for by assimilation of small amounts of Paleozoic or older continental crust during crystal fractionation of andesite parent magmas at crustal levels. The Blackburn Hills field, which consists of medium-K basalt, andesite, and rhyolite intruded by a small granitic pluton, has a large range in initial 87 Sr/ 86 Sr and initial 143 Nd/ 144 Nd that plot in the field for 60 Ma mantle, from near mid-ocean ridge basalts to near “bulk-earth” compositions (initial 87 Sr/ 86 Sr = 0.7033–0.7052; initial 143 Nd/ 144 Nd = 0.51253–0.51290). Andesites and basalts from the Blackburn Hills are divided into two group on the basis of rare earth element (REE) and isotopic composition. Isotopic variation in the more primitive group 1 is best explained by assimilation of the lower crust of the Jurassic to Early Cretaceous Koyukuk terrane by mantle-derived basalts during crystal fractionation, though part of the isotopic variation may be due to metasomatism of an oceanic island basalt type mantle source by fluids derived from subducted sediments. Group 2 andesites from the Blackburn Hills have lower heavy REE abundances and more enriched isotopic compositions. These group 2 andesites and dacites from the Kanuti field, which have ( 87 Sr/ 86 Sr) i = 0.7043–0.7048 and ( 143 Nd/ 144 Nd) i = 0.51248–0.51267, appear to have formed by partial melting of the lower crust of the Koyukuk terrane. The Yukon River field consists of basalt, andesite, dacite, and rhyolite having ( 87 Sr/ 86 Sr) i = 0.7037–0.7051 and ( 143 Nd/ 144 Nd) i = 0.51266–0.51280; its isotopic composition does not require the presence of Paleozoic or older continental crust under the volcanic field and may have formed by interaction between mantle-derived melts and the oceanic Angayucham/Tozitna or island arc Koyukuk terrane. Most of the intrusive rocks and rhyolite domes from the Blackburn Hills volcanic field have ( 87 Sr/ 86 Sr) i = 0.7038–0.7041 and dacites from the Kanuti volcanic field have ( 87 Sr/ 86 Sr) i = 0.7043–0.7048. Thus little or no old continental crust was involved in the genesis of the Late Cretaceous and early Tertiary rocks and therefore probably does not extend beneath this part of the Yukon-Koyukuk province. However, the ultimate source of the small volumes of enriched shoshonitic andesite ( 87 Sr/ 86 Sr = 0.7075, 143 Nd/ 144 Nd = 0.5125) erupted at 118 Ma in the Yukon-Koyukuk province may be continental lithosphere, which may have been thrust under this part of the Yukon-Koyukuk province during arc-continent collision in the Early Cretaceous.

Journal of Geophysical Research Solid Earth

Effect of sea water interaction on strontium isotope composition of deep-sea basalts

Analyses of rim-to-interior samples of fresh tholeiitic pillow basalts, deuterically altered holocrystalline basalts, and older, weathered tholeiitic basalts from the deep sea indicate that 87 Sr/ 86 Sr ratios of the older basalts are raised by low temperature interaction with strontium dissolved in sea water. 87 Sr/ 86 Sr correlates positively with H 2 O in these basalts; however, there is little detectable modification of the strontium isotope composition in rocks with H 2 O contents less than 1%. The isotope changes appear to be a function of relatively long-term, low-temperature weathering, rather than high-temperature or deuteric alteration. Strontium abundance and isotopic data for these rocks suggest that strontium content is only slightly modified by interaction with sea water, and it is a relatively insensitive indicator of marine alteration. Average Rb-Sr parameters for samples of apparently unaltered basalt are: Rb= 1.11ppm; Sr= 132ppm; 87 Sr/ 86 Sr= 0.70247.

Earth and Planetary Science Letters

Introduction to special section: Stress triggers, stress shadows, and implications for seismic hazard

Many aspects of earthquake mechanics remain an enigma as we enter the closing years of the twentieth century. One potential bright spot is the realization that simple calculations of stress changes may explain some earthquake interactions, just as previous and on going studies of stress changes have begun to explain human-induced seismicity. This paper, which introduces the special section “Stress Triggers, Stress Shadows, and Implications for Seismic Hazard,” reviews many published works and presents a compilation of quantitative earthquake interaction studies from a stress change perspective. This synthesis supplies some clues about certain aspects of earthquake mechanics. It also demonstrates that much work remains before we can understand the complete story of how earthquakes work.

Journal of Geophysical Research B: Solid Earth

Climatic sensitivity of dryland soil CO2 fluxes differs dramatically with biological soil crust successional state

Arid and semiarid ecosystems make up approximately 41% of Earth’s terrestrial surface and are suggested to regulate the trend and interannual variability of the global terrestrial carbon (C) sink. Biological soil crusts (biocrusts) are common dryland soil surface communities of bryophytes, lichens, and/or cyanobacteria that bind the soil surface together and that may play an important role in regulating the climatic sensitivity of the dryland C cycle. Major uncertainties exist in our understanding of the interacting effects of changing temperature and moisture on CO 2 uptake (photosynthesis) and loss (respiration) from biocrust and sub-crust soil, particularly as related to biocrust successional state. Here, we used a mesocosm approach to assess how biocrust successional states related to climate treatments. We subjected bare soil (Bare), early successional lightly pigmented cyanobacterial biocrust (Early), and late successional darkly pigmented moss-lichen biocrust (Late) to either ambient or + 5°C above ambient soil temperature for 84 days. Under ambient temperatures, Late biocrust mesocosms showed frequent net uptake of CO 2 , whereas Bare soil, Early biocrust, and warmed Late biocrust mesocosms mostly lost CO 2 to the atmosphere. The inhibiting effect of warming on CO 2 exchange was a result of accelerated drying of biocrust and soil. We used these data to parameterize, via Bayesian methods, a model of ecosystem CO 2 fluxes, and evaluated the model with data from an autochamber CO 2 system at our field site on the Colorado Plateau in SE Utah. In the context of the field experiment, the data underscore the negative effect of warming on fluxes both biocrust CO 2 uptake and loss—which, because biocrusts are a dominant land cover type in this ecosystem, may extend to ecosystem-scale C cycling.

Ecosystems

An aem-tem study of weathering and diagenesis, Abert Lake, Oregon: I. Weathering reactions in the volcanics

Abert Lake in south-central Oregon provides a site suitable for the study of sequential weathering and diagenetic events. In this first of two papers, transmission electron microscopy was used to characterize the igneous mineralogy, subsolidus alteration assemblage, and the structural and chemical aspects of silicate weathering reactions that occur in the volcanic rocks (basalts, basaltic andesites, and dacitic/ rhyolitic extrusive and pyroclastics) that outcrop around the lake. Olivine and pyroxene replacement occurred topotactically, whereas feldspar and glass alteration produced randomly oriented smectite in channels and cavities. The tetrahedral, octahedral, and interlayer compositions of the weathering products, largely dioctahedral smectites, varied with primary mineral composition, rock type, and as the result of addition of elements released from adjacent reaction sites. Weathering of the highly evolved, Fe-rich Jug Mountain complex at the north end of the lake produced a homogeneous smectite assemblage that contrasts with the heterogeneous smectite assemblage replacing the volcanics along the eastern margin of the lake. The variability within and between the smectite assemblages highlights the microenvironmental diversity, fluctuating redox conditions, and variable solution chemistry associated with mineral weathering reactions in the surficial environment. Late-stage exhalative and aqueous alteration of the volcanics redistributed many components and formed a variety of alkali and alkali-earth carbonate, chloride, sulfate, and fluoride minerals in vugs and cracks. Overall, substantial Mg, Si, Na, Ca, and K are released by weathering reactions that include the almost complete destruction of the Mg-smectite that initially replaced olivine. The leaching of these elements from the volcanics provides an important source of these constituents in the lake water. The nature of subsequent diagenetic reactions resulting from the interaction between the materials transported to the lake and the solution will be described in part II ( Banfield et al., 1991).

Geochimica et Cosmochimica Acta

The influence of sea level rise on the regional interdependence of coastal infrastructure

Sea level rise (SLR) is placing both immediate and long‐term pressures on coastal communities to take protective actions. Projects in the United States, and in many locations throughout the world, generally involve local jurisdictions raising the elevation of shoreline protection elements, with limited or no analysis of the feedback between shoreline management decisions and the impacts to water levels regionally. Our study examines the impact of local shoreline development on regional flood risk and considers SLR scenarios up to 1.5 m using a large‐scale numerical model, as an example, for San Francisco Bay. Here we show that measures to prevent flooding along an embayment shoreline in one location or subregion may increase inundation elsewhere in the system. The network of interactions occurs not only within subbasins of the Bay but also across the greater geographic extent from one end of the Bay to the other, and local jurisdiction may have either reciprocal relationships with or asymmetric impacts on one other. Importantly, the nature of the interaction network is seen to evolve with SLR: interactions are purely subregional at current sea level but with higher sea level (e.g., 1 m of SLR), not only do the subregional interdependencies strengthen but also regional interdependences emerge.

California

Influence of welded boundaries in anelastic media on energy flow, and characteristics of P, S-I, and S-II waves: Observational evidence for inhomogeneous body waves in low-loss solids

A general computer code, developed to calculate anelastic reflection-refraction coefficients, energy flow, and the physical characteristics for general P , S -I, and S -II waves, quantitatively describes physical characteristics for wave fields in anelastic media that do not exist in elastic media. Consideration of wave fields incident on boundaries between anelastic media shows that scattered wave fields experience reductions in phase and energy speeds, increases in maximum attenuation and Q −1 , and directions of maximum energy flow distinct from phase propagation. Each of these changes in physical characteristics are shown to vary with angle of incidence. Finite relaxation times for anelastic media result in energy flow due to interaction of superimposed radiation fields and contribute to energy flow across anelastic boundaries for all angles of incidence. Agreement of theoretical and numerical results with laboratory measurements argues for the validity of the theoretical and numerical formulations incorporating inhomogeneous wave fields. The agreement attests to the applicability of the model and helps confirm the existence of inhomogeneous body waves and their associated set of distinct physical characteristics in the earth. The existence of such body waves in layered, low-loss anelastic solids implies the need to reformulate some seismological models of the earth. The exact anelastic formulation for a liquid-solid interface with no low-loss approximations predicts the existence of a range of angles of incidence or an anelastic Rayleigh window, through which significant amounts of energy are transmitted across the boundary. The window accounts for the discrepancy apparent between measured reflection data presented in early textbooks and predictions based on classical elasticity theory. Characteristics of the anelastic Rayleigh window are expected to be evident in certain sets of wide-angle, ocean-bottom reflection data and to be useful in estimating Q −1 for some ocean bottom reflectors.

Journal of Geophysical Research B: Solid Earth

Mountain plant communities: Uncertain sentinels?

Mountain plant communities are thought to be sensitive to climate change and thus able to reveal its effects sooner than others. Two plant communities examined here, alpine treeline ecotones and alpine tundra, have been observed to respond to climate change in recent decades. Treeline has moved upslope and alpine tundra communities have had some species increase and others decrease. The response for both, however, has been inconsistent if taken as a whole. Problematic factors for this response are outlined for both: abiotic and biotic interactions partially decouple the plant communities from climate. Differences across spatial and temporal scales complicate interpretation. Partial decoupling leads to nonlinear responses and difficulties for prediction and for planning mitigation.

Progress in Physical Geography: Earth and Environm

EAARL Topography-Vicksburg National Military Park 2007: First Surface

These remotely sensed, geographically referenced elevation measurements of Lidar-derived first-surface (FS) topography were produced as a collaborative effort between the U.S. Geological Survey (USGS), Florida Integrated Science Center (FISC), St. Petersburg, FL; the National Park Service (NPS), Gulf Coast Network, Lafayette, LA; and the National Aeronautics and Space Administration (NASA), Wallops Flight Facility, VA. This project provides highly detailed and accurate datasets of the Vicksburg National Military Park in Mississippi, acquired on September 12, 2007. The datasets are made available for use as a management tool to research scientists and natural resource managers. An innovative airborne Lidar instrument originally developed at the NASA Wallops Flight Facility, and known as the Experimental Advanced Airborne Research Lidar (EAARL), was used during data acquisition. The EAARL system is a raster-scanning, waveform-resolving, green-wavelength (532-nanometer) Lidar designed to map near-shore bathymetry, topography, and vegetation structure simultaneously. The EAARL sensor suite includes the raster-scanning, water-penetrating full-waveform adaptive Lidar, a down-looking red-green-blue (RGB) digital camera, a high-resolution multi-spectral color infrared (CIR) camera, two precision dual-frequency kinematic carrier-phase GPS receivers, and an integrated miniature digital inertial measurement unit, which provide for submeter georeferencing of each laser sample. The nominal EAARL platform is a twin-engine Cessna 310 aircraft, but the instrument may be deployed on a range of light aircraft. A single pilot, a Lidar operator, and a data analyst constitute the crew for most survey operations. This sensor has the potential to make significant contributions in measuring sub-aerial and submarine coastal topography within cross-environmental surveys. Elevation measurements were collected over the survey area using the EAARL system, and the resulting data were then processed using the Airborne Lidar Processing System (ALPS), a custom-built processing system developed in a NASA-USGS collaboration. ALPS supports the exploration and processing of Lidar data in an interactive or batch mode. Modules for presurvey flight line definition, flight path plotting, Lidar raster and waveform investigation, and digital camera image playback have been developed. Processing algorithms have been developed to extract the range to the first and last significant return within each waveform. ALPS is used routinely to create maps that represent submerged or first surface topography. Specialized filtering algorithms have been implemented to determine the 'bare earth' under vegetation from a point cloud of last return elevations.

Data Series

EAARL topography - Natchez Trace Parkway 2007: First surface

These remotely sensed, geographically referenced elevation measurements of Lidar-derived first surface (FS) topography were produced as a collaborative effort between the U.S. Geological Survey (USGS), Florida Integrated Science Center (FISC), St. Petersburg, FL; the National Park Service (NPS), Gulf Coast Network, Lafayette, LA; and the National Aeronautics and Space Administration (NASA), Wallops Flight Facility, VA. This project provides highly detailed and accurate datasets of a portion of the Natchez Trace Parkway in Mississippi, acquired on September 14, 2007. The datasets are made available for use as a management tool to research scientists and natural resource managers. An innovative airborne Lidar instrument originally developed at the NASA Wallops Flight Facility, and known as the Experimental Advanced Airborne Research Lidar (EAARL), was used during data acquisition. The EAARL system is a raster-scanning, waveform-resolving, green-wavelength (532-nanometer) Lidar designed to map near-shore bathymetry, topography, and vegetation structure simultaneously. The EAARL sensor suite includes the raster-scanning, water-penetrating full-waveform adaptive Lidar, a down-looking red-green-blue (RGB) digital camera, a high-resolution multi-spectral color infrared (CIR) camera, two precision dual-frequency kinematic carrier-phase GPS receivers, and an integrated miniature digital inertial measurement unit, which provide for submeter georeferencing of each laser sample. The nominal EAARL platform is a twin-engine Cessna 310 aircraft, but the instrument may be deployed on a range of light aircraft. A single pilot, a Lidar operator, and a data analyst constitute the crew for most survey operations. This sensor has the potential to make significant contributions in measuring sub-aerial and submarine coastal topography within cross-environmental surveys. Elevation measurements were collected over the survey area using the EAARL system, and the resulting data were then processed using the Airborne Lidar Processing System (ALPS), a custom-built processing system developed in a NASA-USGS collaboration. ALPS supports the exploration and processing of Lidar data in an interactive or batch mode. Modules for presurvey flight line definition, flight path plotting, Lidar raster and waveform investigation, and digital camera image playback have been developed. Processing algorithms have been developed to extract the range to the first and last significant return within each waveform. ALPS is used routinely to create maps that represent submerged or first surface topography. Specialized filtering algorithms have been implemented to determine the 'bare earth' under vegetation from a point cloud of last return elevations.

Data Series

EAARL submerged topography– U.S. Virgin Islands 2003

These remotely sensed, geographically referenced elevation measurements of Lidar-derived submerged topography were produced as a collaborative effort between the U.S. Geological Survey (USGS), Florida Integrated Science Center (FISC), St. Petersburg, FL; the National Park Service (NPS), South Florida-Caribbean Network, Miami, FL; and the National Aeronautics and Space Administration (NASA), Wallops Flight Facility, VA. This project provides highly detailed and accurate bathymetric datasets of a portion of the U.S. Virgin Islands, acquired on April 21, 23, and 30, May 2, and June 14 and 17, 2003. The datasets are made available for use as a management tool to research scientists and natural resource managers. An innovative airborne Lidar instrument originally developed at the NASA Wallops Flight Facility, and known as the Experimental Advanced Airborne Research Lidar (EAARL), was used during data acquisition. The EAARL system is a raster-scanning, waveform-resolving, green-wavelength (532-nanometer) Lidar designed to map near-shore bathymetry, topography, and vegetation structure simultaneously. The EAARL sensor suite includes the raster-scanning, water-penetrating full-waveform adaptive Lidar, a down-looking red-green-blue (RGB) digital camera, a high-resolution multi-spectral color infrared (CIR) camera, two precision dual-frequency kinematic carrier-phase GPS receivers, and an integrated miniature digital inertial measurement unit, which provide for submeter georeferencing of each laser sample. The nominal EAARL platform is a twin-engine Cessna 310 aircraft, but the instrument may be deployed on a range of light aircraft. A single pilot, a Lidar operator, and a data analyst constitute the crew for most survey operations. This sensor has the potential to make significant contributions in measuring sub-aerial and submarine coastal topography within cross-environmental surveys. Elevation measurements were collected over the survey area using the EAARL system, and the resulting data were then processed using the Airborne Lidar Processing System (ALPS), a custom-built processing system developed in a NASA-USGS collaboration. ALPS supports the exploration and processing of Lidar data in an interactive or batch mode. Modules for presurvey flight line definition, flight path plotting, Lidar raster and waveform investigation, and digital camera image playback have been developed. Processing algorithms have been developed to extract the range to the first and last significant return within each waveform. ALPS is used routinely to create maps that represent submerged or first surface topography. Specialized filtering algorithms have been implemented to determine the 'bare earth' under vegetation from a point cloud of last return elevations.

St John Island

EAARL coastal topography–Northeast Barrier Islands 2007: First surface

These remotely sensed, geographically referenced elevation measurements of Lidar-derived first surface (FS) topography were produced collaboratively by the U.S. Geological Survey (USGS), Florida Integrated Science Center (FISC), St. Petersburg, FL, and the National Aeronautics and Space Administration (NASA), Wallops Flight Facility, VA. This project provides highly detailed and accurate datasets of the northeast coastal barrier islands in New York and New Jersey, acquired April 29-30 and May 15-16, 2007. The datasets are made available for use as a management tool to research scientists and natural resource managers. An innovative airborne Lidar instrument originally developed at the NASA Wallops Flight Facility, and known as the Experimental Advanced Airborne Research Lidar (EAARL), was used during data acquisition. The EAARL system is a raster-scanning, waveform-resolving, green-wavelength (532-nanometer) Lidar designed to map near-shore bathymetry, topography, and vegetation structure simultaneously. The EAARL sensor suite includes the raster-scanning, water-penetrating full-waveform adaptive Lidar, a down-looking red-green-blue (RGB) digital camera, a high-resolution multi-spectral color infrared (CIR) camera, two precision dual-frequency kinematic carrier-phase GPS receivers, and an integrated miniature digital inertial measurement unit, which provide for submeter georeferencing of each laser sample. The nominal EAARL platform is a twin-engine Cessna 310 aircraft, but the instrument may be deployed on a range of light aircraft. A single pilot, a Lidar operator, and a data analyst constitute the crew for most survey operations. This sensor has the potential to make significant contributions in measuring sub-aerial and submarine coastal topography within cross-environmental surveys. Elevation measurements were collected over the survey area using the EAARL system, and the resulting data were then processed using the Airborne Lidar Processing System (ALPS), a custom-built processing system developed in a NASA-USGS collaboration. ALPS supports the exploration and processing of Lidar data in an interactive or batch mode. Modules for presurvey flight line definition, flight path plotting, Lidar raster and waveform investigation, and digital camera image playback have been developed. Processing algorithms have been developed to extract the range to the first and last significant return within each waveform. ALPS is routinely used to create maps that represent submerged or first surface topography. Specialized filtering algorithms have been implemented to determine the 'bare earth' under vegetation from a point cloud of last return elevations.

New York

EAARL Coastal Topography-Pearl River Delta 2008: First Surface

These remotely sensed, geographically referenced elevation measurements of Lidar-derived first surface (FS) topography were produced as a collaborative effort between the U.S. Geological Survey (USGS), Florida Integrated Science Center (FISC), St. Petersburg, FL; the University of New Orleans (UNO), Pontchartrain Institute for Environmental Sciences (PIES), New Orleans, LA; and the National Aeronautics and Space Administration (NASA), Wallops Flight Facility, VA. This project provides highly detailed and accurate datasets of a portion of the Pearl River Delta in Louisiana and Mississippi, acquired March 9-11, 2008. The datasets are made available for use as a management tool to research scientists and natural resource managers. An innovative airborne Lidar instrument originally developed at the NASA Wallops Flight Facility, and known as the Experimental Advanced Airborne Research Lidar (EAARL), was used during data acquisition. The EAARL system is a raster-scanning, waveform-resolving, green-wavelength (532-nanometer) Lidar designed to map near-shore bathymetry, topography, and vegetation structure simultaneously. The EAARL sensor suite includes the raster-scanning, water-penetrating full-waveform adaptive Lidar, a down-looking red-green-blue (RGB) digital camera, a high-resolution multi-spectral color infrared (CIR) camera, two precision dual-frequency kinematic carrier-phase GPS receivers, and an integrated miniature digital inertial measurement unit, which provide for submeter georeferencing of each laser sample. The nominal EAARL platform is a twin-engine Cessna 310 aircraft, but the instrument may be deployed on a range of light aircraft. A single pilot, a Lidar operator, and a data analyst constitute the crew for most survey operations. This sensor has the potential to make significant contributions in measuring sub-aerial and submarine coastal topography within cross-environmental surveys. Elevation measurements were collected over the survey area using the EAARL system, and the resulting data were then processed using the Airborne Lidar Processing System (ALPS), a custom-built processing system developed in a NASA-USGS collaboration. ALPS supports the exploration and processing of Lidar data in an interactive or batch mode. Modules for presurvey flight line definition, flight path plotting, Lidar raster and waveform investigation, and digital camera image playback have been developed. Processing algorithms have been developed to extract the range to the first and last significant return within each waveform. ALPS is used routinely to create maps that represent submerged or first surface topography. Specialized filtering algorithms have been implemented to determine the 'bare earth' under vegetation from a point cloud of last return elevations.

Data Series