Search USGS⌕ Search

SEARCH · Search USGS

Results for “Geology of the Pacific Ocean”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15Linked to original sources
USGS1989

Sea-floor drainage features of Cascadia Basin and the adjacent continental slope, northeast Pacific Ocean

Sea-floor drainage features of Cascadia Basin and the adjacent continental slope include canyons, primary fan valleys, deep-sea valleys, and remnant valley segments. Long-range sidescan sonographs and associated seismic-reflection profiles indicate that the canyons may originate along a mid-slope escarpment and grow upslope by mass wasting and downslope by valley erosion or aggradation. Most canyons are partly filled with sediment, and Quillayute Canyon is almost completely filled. Under normal growth conditions, the larger canyons connect with primary fan valleys or deep-sea valleys in Cascadia Basin, but development of accretionary ridges blocks or re-routes most canyons, forcing abandonment of the associated valleys in the basin. Astoria Fan has a primary fan valley that connects with Astoria Canyon at the fan apex. The fan valley is bordered by parallel levees on the upper fan but becomes obscure on the lower fan, where a few valley segments appear on the sonographs. Apparently, Nitinat Fan does not presently have a primary fan valley; none of the numerous valleys on the fan connect with a canyon. The Willapa—Cascadia—Vancouver—Juan de Fuca deep-sea valley system bypasses the submarine fans and includes deeply incised valleys to broad shallow swales, as well as within-valley terraces and hanging-valley confluences.

Marine Geology↗
USGS2007

Field test comparison of an autocorrelation technique for determining grain size using a digital 'beachball' camera versus traditional methods

This extensive field test of an autocorrelation technique for determining grain size from digital images was conducted using a digital bed-sediment camera, or 'beachball' camera. Using 205 sediment samples and >1200 images from a variety of beaches on the west coast of the US, grain size ranging from sand to granules was measured from field samples using both the autocorrelation technique developed by Rubin [Rubin, D.M., 2004. A simple autocorrelation algorithm for determining grain size from digital images of sediment. Journal of Sedimentary Research, 74(1): 160-165.] and traditional methods (i.e. settling tube analysis, sieving, and point counts). To test the accuracy of the digital-image grain size algorithm, we compared results with manual point counts of an extensive image data set in the Santa Barbara littoral cell. Grain sizes calculated using the autocorrelation algorithm were highly correlated with the point counts of the same images (r2 = 0.93; n = 79) and had an error of only 1%. Comparisons of calculated grain sizes and grain sizes measured from grab samples demonstrated that the autocorrelation technique works well on high-energy dissipative beaches with well-sorted sediment such as in the Pacific Northwest (r2 ??? 0.92; n = 115). On less dissipative, more poorly sorted beaches such as Ocean Beach in San Francisco, results were not as good (r2 ??? 0.70; n = 67; within 3% accuracy). Because the algorithm works well compared with point counts of the same image, the poorer correlation with grab samples must be a result of actual spatial and vertical variability of sediment in the field; closer agreement between grain size in the images and grain size of grab samples can be achieved by increasing the sampling volume of the images (taking more images, distributed over a volume comparable to that of a grab sample). In all field tests the autocorrelation method was able to predict the mean and median grain size with ???96% accuracy, which is more than adequate for the majority of sedimentological applications, especially considering that the autocorrelation technique is estimated to be at least 100 times faster than traditional methods.

Sedimentary Geology↗
USGS1989

Application of the Graphic Correlation method to Pliocene marine sequences

Biostratigraphy — the use of paleontological evidence to establish relative chronologies, forms the cornerstone of many sedimentary geological investigations. Several different approaches to biochronology are available. Traditional interval zones, defined on lowest and/or highest occurrences of selected taxa, are used to place bodies of rock in a relative chronological framework. Fossil datum levels, which are more numerous than zones, are often used as chronohorizons for correlation purposs. The Graphic Correlation method, like interval zonations, synthesizes information from a number of different taxa but does not assume synchrony of any one taxon. A magnetobiostratigraphic model for deep-sea Pliocene sequences has been constructed by graphic correlation of Deep Sea Drilling project cores from the North Atlantic (606), Caribbean Sea (502), South Atlantic (516), Tasman Sea (590), Equatorial Pacific (573) and North Pacific (577). All cores are hydraulic piston cores which contain abundant planktonic foraminifers, calcareous nannofossils and which record many of the magnetic reversals expected in the Pliocene. The model is based on internally consistent paleontologic data gathered by the author. This study demonstrates the advantages of graphic correlation over conventional biostratigraphic procedures. Accurate inter-regional correlations can be made between core sites without resorting to multiple microfossil zonations and without invoking synchrony of fossil events. Important results of this study are: (1) many Pliocene planktonic foraminifer and calcareous nannofossil events are diachronous by more than 0.20 m.y., (2) Globorotalia truncatulinoides first occurs in the Southwest Pacific Ocean, approximately 0.50 m.y. earlier than previously reported, (3) a previously undetected hiatus of short duration (0.38 m.y.) exists just above the Cochiti subchron at DSDP 577A.

Marine Micropaleontology↗
USGS2015

Geologic Map of Baranof Island, southeastern Alaska

This map updates the geology of Baranof Island based on fieldwork, petrographic analyses, paleontologic ages, and isotopic ages. These new data provide constraints on depositional and metamorphic ages of lithostratigraphic rock units and the timing of structures that separate them. Kinematic analyses and thermobarometric calculations provide insights on the regional tectonic processes that affected the rocks on Baranof Island. The rocks on Baranof Island are components of a Paleozoic to Early Tertiary oceanic volcanic arc complex, including sedimentary and volcanic rocks that were deposited on and adjacent to the arc complex, deformed, and accreted. The arc complex consists of greenschist to amphibolite facies Paleozoic metavolcanic and metasedimentary rocks overlain by lower-grade Triassic metasedimentary and metavolcanic rocks and intruded by Jurassic calc-alkaline plutons. The Paleozoic rocks correlate well in age and lithology with rocks of the Sicker and Buttle Lake Groups of the Wrangellia terrane on Vancouver Island and differ from rocks of the Skolai Group that constitute basement to type-Wrangellia in the Wrangell Mountains. The Jurassic intrusive rocks are correlative with plutons that intrude the Wrangellia terrane on Vancouver Island but are lacking in the Wrangell Mountains. The rocks accreted beneath the arc complex are referred to as the Baranof Accretionary Complex in this report and are correlated with the Chugach Accretionary Complex of southern and southeastern Alaska and with the Pacific Rim Complex on Vancouver Island. Stratigraphic correlations between upper- and lower-plate rocks on Baranof Island and western Chichagof Island with rocks on Haida Gwaii and Vancouver Island, in addition to correlative ages of intrusive rocks and restorations of the Fairweather-Queen Charlotte, Chatham Strait, and Peril Strait Faults that define the Baranof-Chichagof block, suggest Baranof Island was near Vancouver Island at the time of initiation of arc magmatism in the Early Jurassic. Early Eocene plutons that intruded the accretionary complex outboard of the arc on Baranof Island are attributed to anatectic melting of trench sediments resulting from subduction of a spreading center. Oligocene intrusive rocks on Baranof Island correlate in age and composition with intrusive rocks in the Kano Plutonic Suite on Haida Gwaii, and similar magmatic sources are inferred.

Alaska↗
USGS2025

Developing a probabilistic tsunami hazard assessment framework for Pacific sources: USGS Powell Center meeting summary

Multi-organizational principal investigators formed a U.S. Geological Survey (USGS) Powell Center Working Group (WG), Tsunami Source Standardization for Hazards Mitigation in the United States, to develop a comprehensive series of sources capable of generating tsunamis that could impact U.S. state and territory coastal areas using probabilistic tsunami hazard analysis (PTHA). PTHA results are commonly used to provide consistent tsunami hazard information for use in engineering and risk assessment and, to a lesser extent, hazard response planning. Following an initial weeklong planning meeting in April 2018, designed to establish the WG’s scope, a series of weeklong meetings devoted to aspects of tsunami hazards placed emphasis on assessment of various tsunami sources, including subduction zones in Alaska, the Atlantic and Caribbean, Cascadia, and the Pacific Basin, as well as landslides in Alaska, the Atlantic, and the Caribbean. The final meeting in the series discussed tsunami sources from crustal faults. These meetings, each with a regional geographic focus, were designed to incorporate reviews and feedback from subject matter experts (SMEs) in academia, private industry, and federal, state, and local governmental organizations. Incorporating consensus from SMEs is important because the results derived from the tsunami source models will be used to inform the public about potential hazards from tsunamis related to safety concerns. This paper describes the USGS Powell Center meeting in March 2023, devoted specifically to developing a PTHA for tsunami sources in the Pacific Ocean Basin other than the Alaska–Aleutian and Cascadia subduction zones that were addressed during previous WG meetings.

Environmental & Engineering Geoscience↗
USGS2018

California State Waters Map Series — Offshore of Gaviota, California

Introduction In 2007, the California Ocean Protection Council initiated the California Seafloor Mapping Program (CSMP), designed to create a comprehensive seafloor map of high-resolution bathymetry, marine benthic habitats, and geology within the 3-nautical-mile limit of California’s State Waters. The CSMP approach is to create highly detailed seafloor maps through collection, integration, interpretation, and visualization of swath sonar data, acoustic backscatter, seafloor video, seafloor photography, high-resolution seismic-reflection profiles, and bottom-sediment sampling data. The map products display seafloor morphology and character, identify potential marine benthic habitats, and illustrate both the surficial seafloor geology and shallow subsurface geology. The map area is in the southern part of the Western Transverse Ranges geologic province, which is north of the California Continental Borderland. Significant clockwise rotation—at least 90°—since the early Miocene has been proposed for the Western Transverse Ranges province, and the region is presently undergoing north-south shortening. The offshore part of the map area lies south of the steep south flank of the Santa Ynez M ountains . The crest of the range , which has a maximum elevation of about 760 m in the map area , lies about 4 km north of the shoreline. Gaviota is an unincorporated community that has a sparse population (less than 100), and the coastal zone is largely open space that is locally used for cattle grazing. The Union Pacific railroad tracks extend westward along the coast through the entire map area, within a few hundred meters of the shoreline. Highway 101 crosses the eastern part of the map area, also along the coast, then turns north (inland) and travels through Cañada de la Gaviota and Gaviota Pass en route to Buellton. Gaviota State Park lies at the mouth of Cañada de la Gaviota. West of Gaviota, the onland coastal zone is occupied by the Hollister Ranch, a privately owned, gated community that has no public access. The map area has a long history of petroleum exploration and development. Several offshore gas fields were discovered and were developed by onshore directional drilling in the 1950s and 1960s. Three offshore petroleum platforms were installed in adjacent federal waters in 1976 (platform “Honda”) and 1989 (platforms “Heritage” and “Harmony”). Local offshore and onshore operations were serviced for more than a century by the Gaviota marine terminal, which is currently being decommissioned and will be abandoned in an intended transition to public open space. The Offshore of Gaviota map area lies within the western Santa Barbara Channel region of the Southern California Bight, and it is somewhat protected from large Pacific swells from the north and northwest by Point Conception and from south and southwest swells by offshore islands and banks. Much of the shoreline in the map area is characterized by narrow beaches that have thin sediment cover, backed by low (10- to 20-m-high) cliffs that are capped by a narrow coastal terrace. Beaches are subject to wave erosion during winter storms, followed by gradual sediment recovery or accretion in the late spring, summer, and fall months during the gentler wave climate. The map area lies in the western-central part of the Santa Barbara littoral cell, which is characterized by west-to-east transport of sediment from Point Arguello on the northwest to Hueneme and Mugu Canyons on the southeast. Sediment supply to the western and central part of the littoral cell is mainly from relatively small coastal watersheds. In the map area, sediment sources include Cañada de la Gaviota (52 km 2 ), as well as Cañada de la Llegua, Arroyo el Bulito, Cañada de Santa Anita, Cañada de Alegria, Cañada del Agua Caliente, Cañada del Barro, Cañada del Leon, Cañada San Onofre, and many others. Coastal-watershed discharge and sediment load are highly variable, characterized by brief large events during major winter storms and long periods of low (or no) flow and minimal sediment load between storms. In recent (recorded) history, the majority of high-discharge, high-sediment-flux events have been associated with El Niño phases of the El Niño–Southern Oscillation climatic pattern. Shelf width in the Offshore of Gaviota map area ranges from about 4.3 to 4.7 km, and shelf slopes average about 1.0° to 1.2° but are highly variable because of the presence of the large Gaviota sediment bar. This bar extends southwestward for about 9 km from the mouth of Cañada de la Gaviota to the shelf break, is as wide as 2 km, and is by far the largest shore-attached sediment bar in the Santa Barbara Channel. The shelf is underlain by bedrock and variable amounts (0 to as much as 36 m in the Gaviota bar) of upper Quaternary sediments deposited as sea level fluctuated in the late Pleistocene. The trend of the shelf break changes from about 276° to 236° azimuth over a distance of about 12 km, and it ranges in depth from about 91 m to as shallow as 62 to 73 m where significant shelf-break and upper-slope failure and landsliding has apparently occurred. The shelf break in the western part of the map area is notably embayed by the heads of three large (150- to 300-m-wide) channels that have been referred to as “the Gaviota Canyons” or as “Drake Canyon,” “Sacate Canyon,” and “Alegria Canyon.” Seafloor habitats in the broad Santa Barbara Channel region consist of significant amounts of soft, unconsolidated sediment interspersed with isolated areas of rocky habitat that support kelp-forest communities in the nearshore and rocky-reef communities in deeper water. The potential marine benthic habitat types mapped in the Offshore of Gaviota map area are directly related to its Quaternary geologic history, geomorphology, and active sedimentary processes. These potential habitats lie primarily within the Shelf (continental shelf) but also partly within the Flank (basin flank or continental slope) megahabitats. The fairly homogeneous seafloor of sediment and low-relief bedrock provides characteristic habitat for rockfish, groundfish, crabs, shrimp, and other marine benthic organisms. Several areas of smooth sediment form nearshore terraces that have relatively steep, smooth fronts, which may be attractive to groundfish. Below the steep shelf break, soft, unconsolidated sediment is interrupted by the heads of several submarine canyons and rills, some bedrock exposures, and small carbonate mounds associated with asphalt mounds and pockmarks, also good potential habitat for rockfish. The map area includes the relatively small (5.2 km 2 ) Kashtayit State Marine Conservation Area, which largely occupies the inner part of the Gaviota sediment bar.

California↗
USGS2014

Dissolved-solids sources, loads, yields, and concentrations in streams of the conterminous United States

Recent studies have shown that excessive dissolved-solids concentrations in water can have adverse effects on the environment and on agricultural, domestic, municipal, and industrial water users. Such effects motivated the U.S. Geological Survey’s National Water Quality Assessment Program to develop a SPAtially-Referenced Regression on Watershed Attributes (SPARROW) model that has improved the understanding of sources, loads, yields, and concentrations of dissolved solids in streams of the conterminous United States. Using the SPARROW model, long-term mean annual dissolved-solids loads from 2,560 water-quality monitoring stations were statistically related to several spatial datasets that are surrogates for dissolved-solids sources and land-to-water delivery processes. Specifically, sources in the model included variables representing geologic materials, road deicers, urban lands, cultivated lands, and pasture lands. Transport of dissolved solids from these sources was modulated by land-to-water delivery variables that represent precipitation, streamflow, soil, vegetation, terrain, population, irrigation, and artificial drainage characteristics. Where appropriate, the load estimates, source variables, and transport variables were statistically adjusted to represent conditions for the base year 2000. The nonlinear least-squares estimated SPARROW model was used to predict long-term mean annual conditions for dissolved-solids sources, loads, yields, and concentrations in a digital hydrologic network representing nearly 66,000 stream reaches and their corresponding incremental catchments that drain the Nation. Nationwide, the predominant source of dissolved solids yielded from incremental catchments and delivered to local streams is geologic materials in 89 percent of the catchments, road deicers in 5 percent of the catchments, pasture lands in 3 percent of the catchments, urban lands in 2 percent of the catchments, and cultivated lands in 1 percent of the catchments. Whereas incremental catchments with dissolved solids that originated predominantly from geologic sources or from urban lands are found across much of the Nation, incremental catchments with dissolved solids yields that originated predominantly from road deicers are largely found in the Northeast, and incremental catchments with dissolved solids that originated predominantly from cultivated or pasture lands are largely found in the West. The total amount of dissolved solids delivered to the Nation’s streams is 271.9 million metric tons (Mt) annually, of which 194.2 million Mt (71.4%) come from geologic sources, 37.7 million Mt (13.9%) come from road deicers, 18.2 million Mt (6.7%) come from pasture lands, 13.9 million Mt (5.1%) come from urban lands, and 7.9 million Mt (2.9%) come from cultivated lands. Nationwide, the median incremental-catchment yield delivered to local streams is 26 metric tons per year per square kilometer [(Mt/yr)/km 2 ]. Ten percent of the incremental catchments yield less than 4 (Mt/yr)/km 2 , and 10 percent yield more than 90 (Mt/yr)/km 2 . Incremental-catchment yields greater than 50 (Mt/yr)/km 2 mostly occur along the northern part of the West Coast and in a crescent shaped band south of the Great Lakes. For example, the median incremental-catchment yield is 81 (Mt/yr)/km 2 for the Great Lakes, 78 (Mt/yr)/km 2 for the Ohio, and 74 (Mt/yr)/km 2 for the Upper Mississippi water-resources regions. Incremental-catchment yields less than 10 (Mt/yr)/km 2 mostly occur in a wide band across the arid lowland of the interior West that excludes areas along the coast and the extensive, higher mountain ranges. For example, the median incremental-catchment yield is 3 (Mt/yr)/km 2 for the Lower Colorado, 5 (Mt/yr)/km 2 for the Rio Grande, and 8 (Mt/yr)/km 2 for the Great Basin water-resources regions. Predicted incremental loads were cascaded down through the reach network, with loads accumulating from reach to reach. For most stream reaches, the entire incremental load of dissolved solids delivered to the reach was transported to either the ocean or to one of the large streams flowing along the U.S. international boundary without losses occurring along the way. The exceptions to this include streams in the southwestern part of the country, such as the Colorado River, Rio Grande, and streams of internally drained drainages in the Great Basin, where dissolved-solids loads decreased through streamflow diversion for off-stream use, or by infiltration through the streambed. Long-term mean annual flow-weighted concentrations were derived from the predicted accumulated-load and stream-discharge data. Widespread low concentrations, generally less than 100 milligrams per liter (mg/L), occur in many reaches of the New England, South Atlantic-Gulf, and Pacific Northwest water-resources regions as a result of moderate dissolved-solids yields and high runoff rates. Widespread moderate concentrations, generally between 100 and 500 mg/L, occur in many reaches of the Great Lakes, Ohio, and Upper Mississippi River water-resources regions. Whereas dissolved-solids yields are generally high in these regions, runoff rates are also high, which helps moderate concentrations in these regions. Widespread higher concentrations, generally greater than 500 mg/L, occur across a belt of reaches that extends almost continuously from Canada to Mexico in the Midwest, cutting through the Souris-Red-Rainy, Missouri, Arkansas-White-Red, Texas-Gulf, and Rio Grande water-resources regions. Although dissolved-solids yields are moderate to low in these areas, low runoff rates result in the high concentrations for these areas. In 12.6 percent of the Nation’s stream reaches, predicted concentrations of dissolved solids exceed 500 mg/L, the U.S. Environmental Protection Agency’s secondary, nonenforceable drinking water standard. While this standard provides a metric for evaluating predicted concentrations in the context of drinking-water supplies, it should be noted that it only applies to drinking water actually served to customers by water utilities, and it does not apply to all stream reaches in the Nation nor does it apply during times when water is not being withdrawn for use. Exceedance of 500 mg/L is more pronounced in certain water-resources regions than others. For example, about half of the reaches in the Souris-Red-Rainy region have concentrations predicted to exceed 500 mg/L, and between 25 and 37 percent of the reaches in the Missouri, Arkansas-White-Red, Texas-Gulf, Rio Grande, and Lower Colorado regions are predicted to exceed 500 mg/L. Development of stream-load data for use in the SPARROW model also provided long-term temporal trend information in dissolved-solids concentrations at the monitoring stations for their period of record, which was constrained between 1980 and 2009. For the 2,560 monitoring stations used in this study, long-term trends in flow-adjusted dissolved-solids concentrations increased over time at 23 percent of the stations, decreased at 18 percent of the stations, and did not change over time at 59 percent of the stations. Long-term trends show a strong regional spatial pattern where from the western parts of the Great Plains to the West Coast, concentrations mostly either did not change or decreased over time, and from the eastern parts of the Great Plains to the East Coast, concentrations mostly either did not change or increased over time. Results from the trend analysis and from the SPARROW model indicate that, compared to monitoring stations with no trends or decreasing trends, stations with increasing trends are associated with a smaller percentage of the predicted dissolved-solids load originating from geologic sources, and a larger percentage originating from urban lands and road deicers. Conversely, compared to stations with increasing trends or no trends, stations with decreasing trends have a larger percentage of the predicted dissolved-solids load originating from geologic sources and a smaller percentage originating from urban lands and road deicers. Stations with decreasing trends also have larger percentages of predicted dissolved-solids load originating from cultivated lands and pasture lands, compared to stations with increasing trends or no trends.

Scientific Investigations Report↗
USGS2022

Metallogenesis in the western United States

Although the Mesozoic-Cenozoic metallogeny of the western United States unquestionably resulted from convergence of the North American and Pacific Ocean plates, subduction alone does not adequately explain the distribution of the ore deposits in Laramide and post-Laramide time, when magmatism and mineralization extended irregularly eastward at least 1500 km from the continental margin. Stable isotopes (lead and initial 87 Sr/ 86 Sr) indicate derivation of some rock- and ore-forming elements from continental rather than oceanic lithosphere. A gross east-west metals zonation lacks the clearcut divisions evident to the north and south in the Cordillera. Lineaments, difficult or impossible to document unequivocally, seem nevertheless to have played some role in localizing mineral belts transverse to plate boundaries. It is suggested that mantle convection in a reactivated ensialic back-arc, triggered at least in part by subduction on one or more Benioff Zones, became increasingly important both with time and with distance eastward from the Mesozoic trench. Small magma pockets were generated episodically by partial fusion of the continental lithosphere, itself probably in-homogeneous, where deep crustal flaws, many ancient but some perhaps newly created, relieved pressure and provided access to the upper crust.

Western United States↗
USGS1914

San Francisco folio, California, Tamalpais, San Francisco, Concord, San Mateo, and Haywards quadrangles

The five sheets of the San Francisco folio the Tamalpais, Ban Francisco, Concord, Ban Mateo, and Haywards sheets map a territory lying between latitude 37° 30' and 38° and longitude 122° and 122° 45'. Large parts of four of these sheets cover the waters of the Bay of San Francisco or of the adjacent Pacific Ocean. (See fig. 1.) Within the area mapped are the cities of San Francisco, Oakland, Berkeley, Alameda, Ban Rafael, and San Mateo, and many smaller towns and villages. These cities, which have a population aggregating about 750,000, together form the largest and most important center of commercial and industrial activity on the west coast of the United States. The natural advantages afforded by a great harbor, where the railways from the east meet the ships from all ports of the world, have determined the site of a flourishing cosmopolitan, commercial city on the shores of San Francisco Bay. The bay is encircled by hilly and mountainous country diversified by fertile valley lands and divides the territory mapped into two rather contrasted parts, the western part being again divided by the Golden Gate. It will therefore be convenient to sketch the geographic features under four headings (1) the area east of San Francisco Bay; (2) the San Francisco Peninsula; (3) the Marin Peninsula; (4) San Francisco Bay. (See fig. 2.)

California↗
USGS2003

Ground-water resources of Saipan, Commonwealth of the Northern Mariana Islands

Saipan has an area of 48 mi 2 and is the largest of the 14 islands in the Commonwealth of the Northern Mariana Islands (CNMI). The island is formed by volcanic rocks overlain by younger limestones. The island is situated in the western Pacific Ocean at latitude 15 o 12'N and longitude 145 o 45'E, about 3,740 mi west-southwest of Honolulu and midway between Japan and New Guinea (fig. 1). The climate on Saipan is classified as tropical marine with an average temperature of 80 o F. The natural beauty of the island and surrounding waters are the basis for a growing tourist-based economy. The resulting rapid development and increases in resident and tourist populations have added stresses to the island's limited water supplies. Freshwater resources on Saipan are not readily observable because, aside from the abundant rainfall, most freshwater occurs as ground water. Fresh ground water is found in aquifers composed mainly of fragmental limestones. About 90 percent of the municipal water supply comes from 140 shallow wells that withdraw about 11 Mgal/d. The chloride concentration of water withdrawn from production wells ranges from less than 100 mg/L for wells in the Akgak and Capital Hill well fields, to over 2,000 mg/L from wells in the Puerto Rico, Maui IV, and Marpi Quarry well fields. The chloride concentrations and rates of ground-water production are not currently adequate for providing island residents with a potable 24-hour water supply and future demands are expected to be higher. To better understand the ground-water resources of the island, and water resources on tropical islands in general, the U.S. Geological Survey (USGS) entered into a cooperative program with the Commonwealth Utilities Corporation (CUC). The objective of the program, initiated in 1989, is to assess the ground-water resources of Saipan and to make hydrologic information available to the CUC in support of their ongoing efforts to improve the quality and quantity of the municipal water supply. This report presents some of the results of the program including descriptions of (1) the geography and geology, (2) the occurrence of fresh ground water in permeable limestones that extend to some distance below sea level where water-level elevation is affected by ocean tides (coastal aquifers) and in limestones that overlie volcanic basement rocks above sea level (high-level aquifers), (3) the water-table configuration and directions of ground-water flow, and (4) the rainfall, ground-water withdrawal, and chloride concentrations in well water. Also described is the relation of the changes in water-table elevations to changes in sea level, rainfall, and ground-water withdrawal.

Saipan↗
USGS2003

Life and death of the resurrection plate: Evidence for its existence and subduction in the northeastern Pacific in Paleocene-Eocene time

Onshore evidence suggests that a plate is missing from published reconstructions of the northeastern Pacific Ooean in Paleocene- Eocene time. The Resurrection plate, named for the Resurrection Peninsula ophiolite near Seward, Alaska, was located east of the Kula plate and north of the Farallon plate. We interpret coeval near-trench magmatism in southern Alaska and the Cascadia margin as evidence for two slab windows associated with trench-ridge-trench (TRT) triple junctions, which formed the western and southern boundaries of the Resurrection plate. In Alaska, the Sanak-Baranof belt of near-trench intrusions records a west-to-east migration, from 61 to 50 Ma, of the northern TRT triple junction along a 2100-km-long section of coastline. In Oregon, Washington, and southern Vancouver Island, voluminous basaltic volcanism of the Siletz River Volcanics, Crescent Formation, and Metchosin Volcanics occurred between ca. 66 and 48 Ma. Lack of a clear age progression of magmatism along the Cascadia margin suggests that this southern triple junction did not migrate significantly. Synchronous near-trench magmatism from southeastern Alaska to Puget Sound at ca. 50 Ma documents the middle Eocene subduction of a spreading center, the crest of which was subparallel to the margin. We interpret this ca. 50 Ma event as recording the subduction-zone consumption of the last of the Resurrection plate. The existence and subsequent subduction of the Resurrection plate explains (1) northward terrane transport along the southeastern Alaska-British Columbia margin between 70 and 50 Ma, synchronous with an eastward-migrating triple junction in southern Alaska; (2) rapid uplift and voluminous magmatism in the Coast Mountains of British Columbia prior to 50 Ma related to subduction of buoyant, young oceanic crust of the Resurrection plate; (3) cessation of Coast Mountains magmatism at ca. 50 Ma due to cessation of subduction, (4) primitive mafic magmatism in the Coast Mountains and Cascade Range just after 50 Ma, related to slab-window magmatism, (5) birth of the Queen Charlotte transform margin at ca. 50 Ma, (6) extensional exhumation of high-grade metamorphic terranes and development of core complexes in British Columbia, Idaho, and Washington, and extensional collapse of the Cordilleran foreland fold-and-thrust belt in Alberta, Montana, and Idaho after 50 Ma related to initiation of the transform margin, (7) enigmatic 53-45 Ma magmatism associated with extension from Montana to the Yukon Territory as related to slab breakup and the formation of a slab window, (8) right-lateral margin-parallel strike-slip faulting in southern and western Alaska during Late Cretaceous and Paleocene time, which cannot be explained by Farallon convergence vectors, and (9) simultaneous changes in Pacific-Farallon and Pacific-Kula plate motions concurrent with demise of the Kula-Resurrection Ridge.

Geological Society of America Bulletin↗
USGS1991

The longevity of the South Pacific isotopic and thermal anomaly

The South Pacific is anomalous in terms of the Sr, Nd, and Pb isotope ratios of its hot spot basalts, a thermally enhanced lithosphere, and possibly a hotter mantle. We have studied the Sr, Nd, and Pb isotope characteristics of 12 Cretaceous seamounts in the Magellans, Marshall and Wake seamount groups (western Pacific Ocean) that originated in this South Pacific Isotopic and Thermal Anomaly (SOPITA). The range and values of isotope ratios of the Cretaceous seamount data are similar to those of the island chains of Samoa, Tahiti, Marquesas and Cook/Austral in the SOPITA. These define two major mantle components suggesting that isotopically extreme lavas have been produced at SOPITA for at least 120 Ma. Shallow bathymetry, and weakened lithosphere beneath some of the seamounts studied suggests that at least some of the thermal effects prevailed during the Cretaceous as well. These data, in the context of published data, suggest: (1)|SOPITA is a long-lived feature, and enhanced heat transfer into the lithosphere and isotopically anomalous mantle appear to be an intrinsic characteristic of the anomaly. (2)|The less pronounced depth anomaly during northwesterly plate motion suggests that some of the expressions of SOPITA may be controlled by the direction of plate motion. Motion parallel to the alignment of SOPITA hot spots focusses the heat (and chemical input into the lithosphere) on a smaller cross section than oblique motion. (3)|The lithosphere in the eastern and central SOPITA appears to have lost its original depleted mantle characteristics, probably due to enhanced plume/lithosphere interaction, and it is dominated by isotopic compositions derived from plume materials. (4)|We speculate (following D.L. Anderson) that the origin of the SOPITA, and possibly the DUPAL anomaly is largely due to focussed subduction through long periods of the geological history of the earth, creating a heterogeneous distribution of recycled components in the lower mantle

Earth and Planetary Science Letters↗
USGS2004

Quaternary tectonic setting of South-Central coastal California

Recent geodetic, geologic, and seismologic studies show that the south-central coast of California is a region of active Quaternary deformation. Northeast-directed crustal shortening is occurring in a triangular-shaped region between the Hosgri-San Simeon fault system on the west, the Southern Coast Ranges on the northeast, and the western Transverse Ranges on the south. We informally call this region the Los Osos domain. In this study, we conducted detailed geological, seismological, and geophysical investigations to characterize the nature and rates of deformation in the domain. Locations of active and potentially active faults and folds are compiled at a scale of 1:250,000 for the entire domain based primarily on onshore geologic data and offshore geophysical data. Crustal shortening in the domain is accommodated by a series of prominent northwest-trending reverse faults and localized folding. The reverse faults separate distinct structural blocks that have little or no internal deformation. Hangingwall blocks are being uplifted at rates of up to 0.2 mm/yr. Footwall blocks are either static or slowly subsiding at rates of 0.1 mm/yr or less, except for localized areas of concentrated subsidence directly adjacent to some faults. The cumulative rate of crustal shortening is about 1 to 2 mm/yr across the northern part of the domain based on observed geologic deformation. Cumulative shortening across the central and southern parts of the domain is poorly constrained by geologic data and may approach 2 to 3 mm/yr. Historical and instrumental seismicity generally are spatially associated with the uplifted blocks and bordering reverse faults to depths of about 10 km. Together with near-surface geological data and deeper crustal geophysical imaging that show high-angle faulting, the seismicity data indicate that the reverse faults probably extend to the base of the seismogenic crust. The base of the seismogenic crust may correspond with a mid-crustal detachment or decollement surface into which the reverse faults root. We speculate that the detachment may coincide, in part, with the top of a northeast-dipping slab of oceanic crust that extends beneath the western margin of the continent or with the brittle-ductile transition above the subducted slab. The Los Osos domain of north-northeast/south-southwest crustal shortening is structurally detached from the offshore Hosgri Fault Zones. Both the pattern and regional extent of deformation in the Los Osos domain contrast sharply with that of the offshore Santa Maria Basin. The basin is undergoing minor east-northeast/west-southwest crustal shortening at rates of less than 0.1 mm/yr and is moving northwestward at a rate of about 1 to 3 mm/yr relative to the Los Osos domain along the San Simeon and Hosgri Fault Zones. Geodetic data and the kinematics of north-northeast-directed crustal shortening of the Los Osos domain east of the Hosgri Fault Zone show that the rate and cumulative amount of right-slip along the Hosgri Fault Zone progressively decrease southward. Quaternary deformation within the Los Osos domain is related to distributed dextral simple shear associated with Pacific-North American plate motion. Paleomagnetic data show that clockwise rotation of the western Transverse Ranges has occurred along the southern boundary of the domain during the past 6 m.y. During this time, the Salinian crustal block, which forms the eastern boundary of the Los Osos domain, has remained relatively stable. Internal shortening of the Los Osos domain has accommodated the relative motions of these bordering crustal blocks, particularly the rotation of the western Transverse Ranges.

Bulletin↗
USGS2016

Geologic map of the Sauvie Island quadrangle, Multnomah and Columbia Counties, Oregon, and Clark County, Washington

Introduction The Sauvie Island 7.5' quadrangle is situated in the Puget-Willamette Lowland northwest of downtown Portland, Oreg. This lowland, which extends from Puget Sound to west-central Oregon, is a complex structural and topographic trough between the Coast Range and the Cascade Range. Since late Eocene time, the Cascade Range has been the locus of a discontinuously active volcanic arc associated with underthrusting of oceanic lithosphere beneath the North American continent along the Cascadia Subduction Zone. The Coast Range, which occupies the fore-arc position within the Cascadia arc-trench system, consists of a complex assemblage of Eocene to Miocene volcanic and marine sedimentary rocks. The Sauvie Island quadrangle lies along the southwest margin of the Portland Basin, a 2,000-km 2 topographic and structural depression. The basin boundary is an abrupt topographic break at the base of the Tualatin Mountains, which separates the Portland and Tualatin Basins. The Tualatin Mountains are underlain by lava flows of the Miocene Columbia River Basalt Group that have been folded into an asymmetric anticline. Oligocene marine sedimentary rocks, not exposed at the surface, are inferred to underlie the basalt flows. The abrupt basin boundary marks the location of the northwest-striking Portland Hills Fault Zone, which is probably an active structure. The Columbia River flows west and north through the Portland Basin at nearly sea level. The Willamette River enters the Columbia near the southeast corner of the map area. Seismic-reflection profiles and lithologic logs of water wells show as much as 550 m of late Miocene and younger sediments in the deepest part of the basin east of the quadrangle. Deposits exposed at the surface consist chiefly of Holocene and late Pleistocene fluvial and eolian sediments and man-made fill. This map contributes to a U.S. Geological Survey program to improve the geologic database for the Portland region of the Pacific Northwest urban corridor. The map and ancillary data will support assessments of seismic risk, ground-failure hazards, and resource availability.

Oregon, Washington↗
USGS2006

Geologic map of the Lacamas Creek quadrangle, Clark County, Washington

The Lacamas Creek 7.5 minute quadrangle is in southwestern Washington, approximately 25 km northeast of Portland, Oregon, along the eastern margin of the Portland Basin, which is part of the Puget-Willamette Lowland that separates the Cascade Range from the Oregon Coast Range. Since late Eocene time, the Cascade Range has been the locus of an episodically active volcanic arc associated with underthrusting of oceanic lithosphere beneath the North American continent along the Cascadia Subduction Zone. Lava flows that erupted early in the history of the arc underlie the eastern half of the Lacamas Creek quadrangle, forming a dissected terrain, with elevations as high as 2050 ft (625 m), that slopes irregularly but steeply to the southwest. These basalt and basaltic andesite flows erupted in early Oligocene time from one or more vents located outside the map area. The flows dip gently (less than 5 degrees) west to southwest. In the western part of the map area, volcanic bedrock is unconformably overlain by middle Miocene to early Pleistocene(?) sediments that accumulated as the Portland Basin subsided. These sediments consist mostly of detritus carried into the Portland Basin by the ancestral Columbia River. Northwest-striking faults offset the Paleogene basin floor as well as the lower part of the basin fill. In middle Pleistocene time, basalt and basaltic andesite erupted from three small volcanoes in the southern half of the map area. These vents are in the northern part of the Boring volcanic field, which comprises several dozen late Pliocene and younger monogenetic volcanoes scattered throughout the greater Portland region. In latest Pleistocene time, the Missoula floods of glacial-outburst origin inundated the Portland Basin. The floods deposited poorly sorted gravels in the southwestern part of the Lacamas Creek quadrangle that grade northward into finer grained sediments. This map is a contribution to a program designed to improve geologic knowledge of the Portland Basin region of the Pacific Northwest urban corridor, the densely populated Cascadia forearc region of western Washington and Oregon. More detailed information on the bedrock and surficial geology of the basin and its surrounding area is necessary to refine assessments of seismic risk, ground-failure hazards and resource availability in this rapidly growing region.

Scientific Investigations Map↗
USGS2009

Variability of the Southern California wave climate and implications for sediment transport

We analyzed wave and wind data from 18 buoys in the Southern California Bight to characterize the spatial and temporal variability of the regional wave climate. Point Conception shelters most of the Bight from being directly impacted by North Pacific weather. The wave height inside the sheltered zone and to the east of the Channel Islands is less than half the wave height in the open ocean to the west. Within the sheltered Bight, storm waves (by proxy of being greater than the 95th percentile wave height for more than 6 hours) are mainly from the west, but long period swells (T p >15 seconds) are mainly from the south-southwest. There are on average two to four storms during each winter month (November-March) and fewer than two storms per month for the rest of the year. The Channel Islands selectively block the westerly swells and make the wave climate in the Santa Barbara Channel different from the rest of the sheltered Bight. A statistically significant wave-height minimum exists in the area offshore Dana Point and Oceanside. The multiyear (2-23 years) wave-data records from all 18 buoys show negligible temporal trend, positive or negative. Like the wave climate, the long-term probability of sediment transport on the continental shelves of the Bight displays large difference between the sheltered and open-ocean (near Point Conception) sites. The return period of incipient sediment motion on the sheltered shelf breaks (one to five months) is at least two orders of magnitude longer than that on the Point Conception shelf break (0.6 day). Similar to the spatial distribution of wave heights, there is a systematic return-period maximum on the shelf off Dana Point and Oceanside. ?? 2009 The Geological Society of America.

Special Paper of the Geological Society of America↗
USGS1959

Geology of the State of Morelos and contiguous areas in south-central Mexico

The area described lies in south-central Mexico and embraces all but the southeastern corner and easternmost border of the State of Moreles, the second smallest State in the Mexican Republic. It includes small contiguous parts of the State of Mexico, in the northeastern corner, and of the State of Guerrero in the southwestern corner. Limiting geographic coordinates are 98 45 to 99 39 west longitude and 18 18 to 19 08 north latitude, the northern boundary being only 35 km south of Mexico City, capital of the Republic. The geological map does not cover the entire rectangle outlined, but is irregular in form and measures roughly 4150 sq. km, three-quarters of it representing two0thirds of the State of Moreles and the rest lying outside the State. The region ranges in altitude from 730 m above sea level at Iguala near the south edge of the map, to a general level of about 3000 m at the north edge, although individual peaks rise to 3900 m and Popocatepetl Volcano, a few kilometers east of the northeastern border of the map, rises to 5452 m above sea level. Annual rainfall ranges from a minimum of about 640 mm in the low country, to 1200 mm and more at altitudes above 2000 m. Most of it falls in summer between June and September. Winter frosts are rare below 1800 m. The climate is of savanna to steppe type; soils are thin and may be classified as belonging to the tachernoses group, with strong development of calcareous evaporates (caliche) at altitudes below 1800 m. The northern border of the area forms the southern half of the late Pliocene to Recent Neo-volcanic Belt of basic volcanism that crosses Mexico in the direction N. 80 W., and thus has constructional topography. The rest of the area belongs to the Balsas Basin physiographic province, which is characterized by maturely dissected terrain tributary to the large Balsas River. All but the southwestern corner of the area drains southward via the Amacuzac River into the Mexcala-Balsas River, and thence westward into the Pacific Ocean. The southwestern corner drains directly into the Balsas River via the Iguala River. Local relief is of the order of 300 to 600 m. The mature topography was partly buried by late Pliocene alluvium in the central part of the area, owing largely to local volcanism. Dissolution of limestone, dolomite, and anhydrite of the Cretaceous formations has produced sinks and poljes, some of which contain small lakes. Other karst features are also common, such as caves, caverns, underground rivers, and surficial lapies or karren. Drainage blocking by lava and polje development in late Pleistocene and Recent time produced new alluvial flats in this otherwise dissected region. The oldest rock unit in the region is the Texco schist series of late Paleozoic (?) age. It was folded, metamorphosed, foliated, intruded by dikes, and strongly eroded before the next unit, the Texco Viejo green volcanic series of Late Triassic (?) age, was deposited. Another period of metamorphism and erosion followed before the calcareous clastic sediments of the Upper Jurassic (?) Acahuizotla formation were laid down. The next unit consists of the partly phyllitic calcareous shale of the Acuitlapan formation, which is of Neocenian (?) age and rests with at least disconformity on the Acahuizotla formation. The overlying Aptian-Barresian Kochicalco formation of thin-bedded limestone appears to grade upward from the Acuitlapan formation, locally, but it seems to be unconformable elsewhere. All these units have small outcrops in the area mapped and were not studied in detail. Warping and erosion occurred before the overlying Morelos formation began to accumulate in early Albian time. The basal member is anhydrite in the eastern part of the area mapped, but limestone and dolomite were deposited elsewhere. The formation consists largely of shallow-water calcareous bank deposits, with a maximum thickness of about 900 m. Deposition ceased in early Cenomanian time and further warpi

Open-File Report↗
USGS1935

Geology and ground-water resources of the island of Oahu, Hawaii

Oahu, one of the islands of the Hawaiian group, lies in the Mid-Pacific 2,100 miles southwest of San Francisco. The principal city is Honolulu. The Koolau Range makes up the eastern part of the island, and the Waianae Range the western part. Both are extinct basaltic volcanoes deeply dissected by erosion. The Koolau Volcano was the later to become extinct. The Waianae Range is made up of three groups of lavas erupted in Tertiary and possibly in early Pleistocene time. The exposed part of the older lava is nearly 2,000 feet thick and consists largely of thin-bedded pahoehoe. It is separated in most places from the middle lavas by an angular unconformity and talus breccia and in a few places by an erosional unconformity. The middle basalts are about 2,000 feet thick and closely resemble the lower ones except that they contain more aa. The upper lavas reach a thickness of about 2,300 feet and are mostly massive aa flows. The last eruptions produced large cinder cones and some nephelite basalts. The Waianae Volcano, like other Hawaiian volcanoes, produced only small amounts of ash, and the lavas were largely extruded from fissures a few feet wide, now occupied by dikes. The center of activity was near Kolekole Pass, at the head of Lualualei Valley. The Koolau Volcano is made up of two groups of lavas extruded in Tertiary and early Pleistocene (?) time. The older group, the Kailua volcanic series, is greatly altered by hydrothermal action and was extruded from fissures near Lanikai. The flows of the younger group, the Koolau volcanic series, were extruded from fissures about a mile south of the Kailua rift and have an exposed thickness of about 3,000 feet. The Koolau Volcano produced even less ash than the Waianae Volcano, and its flows are thin-bedded pahoehoe and aa. The eruptive center of the Koolau Volcano lies between Kaneohe and Waimanalo. Great amounts of both the Waianae and Koolau Ranges were removed by fluvial and marine erosion during the Pleistocene. The master streams are characterized by deep amphitheater-headed valleys. After this erosion cycle the island was submerged more than 1,200 feet, and these great valleys were drowned and alluviated. Besides this submergence, several strand lines, preserved up to 100 feet above present sea level occur, which may be due to world-wide changes in sea level in response to the withdrawal and restoration of water concurrent with the advances and recessions of the polar ice caps and to accompanying changes in the ocean floor. During this time of shifting ocean levels spasmodic eruptions occurred on the southeast end of the Koolau Range, producing numerous lava flows and tuff cones, most of which are nephelite basalt. The last of these eruptions occurred in Recent time. A description of the climate, rates of run-off, and results of experiments to determine evaporation and transpiration in the areas of high rainfall are given. It was found that the consumptive use decreases materially and becomes a very small percentage of the rainfall in the areas of high precipitation. The lava rocks of the island are very permeable and, because of a rainfall reaching a maximum of 300 inches a year, carry large amounts of ground water, confined and unconfined, basal and perched. The basal ground water floats on salt water because of its lower specific gravity. Consequently for each foot the water table stands above sea level, salt water lies about 42 feet below sea level, in accordance with the sea along the coast as basal ground water. In most places the lava rocks along the shore are overlain by an impermeable or nearly impermeable caprock consisting of submerged lateritic soils and marine noncalcareous sediments. These deposits retard the escape of basal ground water into the sea and give rise to artesian water, but unlike most other artesian systems, this one has no lower restraining formation. The artesian water is the principal source of domestic, municipal, and irrigation supplies. The average annual quantity pumped for the period 1928 to 1933 amounted to about 105,000,000,000 gallons, nearly 90 percent of which came from Koolau hasalt and the remainder from Waianae basalt. There are ten artesian areas in the Koolau Range and two in the Waianae Range. Hydraulic gradients in these basins were found to range from 1.2 to 3 feet to the mile. Because of these extremely flat gradients and the high permeability of the aquifers it is possible to reverse the hydraulic gradients by draft and make the water flow from one artesian area to another. The artesian water levels fluctuate in response to seasonal variations in draft and recharge and in a lesser way to tidal, barometric, and seismic pressures. The water, as shown by chemical analysis, is of excellent quality except where it is contaminated with sea water. Methods have been devised for freshening wells that have gone salty, for detecting leaks, for sealing leaky and defective wells, and for recharging the artesian basins. Owing to the danger of the wells becoming brackish with increased draft, it is believed that further large developments will be more successful if shafts are sunk to sea level in the basalt as far inland as practicable, and tunnels are driven from the bottom of the shafts near the top of the saturated zone. Favorable places for such development exist in Honolulu. In addition to the basal water in the volcanic rocks, water is found in the recent gravel, beach, and dune deposits, and the emerged reef limestone. This water has been recovered by wells and tunnels, and there are favorable localities for developing additional water of this type. The island contains two types of basal springs—those like the Pearl Harbor Springs, which issue from basalt and are supplied by overflow and leakage from the artesian basin, and those which issue from the coastal-plain sediments and are mainly return irrigation water. The total quantity of basal ground water issuing as springs is estimated to be 100,000,000 gallons a day. Ground water occurs at high levels, confined by dikes and perched on tuff, alluvium, and soil beds. These structures give rise to innumerable high-level springs. In the Koolau Range 60 tunnels yield about 33,000,000 gallons daily, of which about 95 percent is obtained from tunnels penetrating the dike complex of the Koolau volcanic series, about 2 percent from tunnels entering post-Koolau ash or tuff deposits, and the remainder from tunnels whose geologic relations are not certainly known. The average daily yield of the tunnels that recover dike water is 2,330 gallons a foot, but the average daily yield of the tunnels in post-Koolau tuff is 450 gallons a foot, and that of the tunnels in alluvium or soil is only 23 gallons a foot. Owing largely to the much lower rainfall on the Waianac Range, its 35 tunnels (not including two new tunnels under construction) yield only about 2,400,000 gallons daily, about 94 percent of which is believed to be obtained from dike systems. The average daily yield of the tunnels in this range that are supplied by dike systems is 581 gallons a foot, as compared to 5 gallons a foot from tunnels in ash or tuff. An extensive tunnel system is proposed to develop a large supply of high-level water for Honolulu from the dike complex of the Koolau series, and high-level water can be recovered by tunnels at many other places. The average daily discharge of all high-level springs in the Koolau Range is about 58,000,000 gallons, of which about 94 percent comes from the Koolau dike complex and about 6 percent from post-Koolau volcanic rocks. The average daily discharge of all high-level springs in the Waianae Range is about 500,000 gallons of which about 81 percent issues from the dike complex.

Hawaii↗