Search USGS⌕ Search

SEARCH · Search USGS

Results for “Geological Journal”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15Linked to original sources
USGS2022

U-Pb zircon geochronology and geological evolution of the Halaban- Al Amar region of the eastern Arabian Shield, Kingdom of Saudi Arabia.

U-Pb zircon model ages for eleven major units from the Halaban-Al Amar region of the eastern Arabian Shield indicate three stages of evolution: (1) plate convergence, (2) plate collision, and (3) post-orogenic intracratonic activity. Convergence occurred between the western Afif and eastern Ar Rayn plates that were separated by oceanic crust. Remnants of oceanic crust now comprise the ophiolitic complexes of the Urd group. The oldest plutonic unit in the study is from one of these complexes and gave an age of 694 ± 8 Ma. Detrital zircons from the sedimentary Abt formation of the Urd group, which is intercalated with the ophiolitic rocks, were derived from source rocks with a mean age of 710 Ma. The Abt formation may be an accretionary wedge on the western margin of the Ar Rayn plate. Plate convergence was terminated by collision of the Afif and Ar Rayn plates during the Al Amar orogeny which began about 670 Ma. During collision, the Urd group rocks were deformed and in part obducted on to one or both plates. Synorogenic leucogranitoid rocks were intruded from 670 to 640 Ma. From about 640 to 630 Ma, widespread unfoliated dioritic plutons were emplaced in the Ar Rayn block, and represent the end of orogenesis related to collision. There is no definitive evidence for a significantly older basement beneath the study region.

Journal of the Geological Society↗
USGS2021

Effect of an algal amendment on the microbial conversion of coal to methane at different sulfate concentrations from the Powder River Basin, USA

Biogenic methane is estimated to account for one-fifth of the natural gas worldwide and there is great interest in controlling methane from different sources. Biogenic coalbed methane (CBM) production relies on syntrophic associations between fermentative bacteria and methanogenic archaea to anaerobically degrade recalcitrant coal and produce methanogenic substrates. However, very little is known about how differences in geochemistry, hydrology, and microbial community composition influence subsurface carbon utilization and CBM production. The addition of an amendment consisting of microalgal biomass has previously been shown to increase CBM production while providing the possibility of a closed-loop fossil system where waste (production water) is used to grow algae to ultimately produce energy (methane). However, the efficiency of enhancing CBM production under different redox conditions remains unresolved. In this study, we focused on the U.S. Geological Survey's Birney test site (Montana, USA) that has nine wells vertically accessing four coal seams with varying geochemistry (low and high sulfate (SO 4 2− )) and methane production rates. We used organic matter (OM) in the form of algal biomass to discern the effect of this amendment on OM degradation and microbially enhanced CBM production potential under different geochemical constraints. We tracked changes in community composition, OM composition, organic carbon (OC) concentration, methane production, and nutrients in batch systems over six months. Methane production was detected only in microcosms from low SO 4 2− wells (168 to 800 μg methane per gram of coal). The OC consumption varied across time for all wells and the variation was greatest for the low SO 4 2− wells. Different groups of syntrophic bacteria were associated with net‑carbon consuming microcosms, and specifically Syntrophorhabdus was identified with several different statistical methods as a potentially important coal degrader. Results from this study provide insight into potential coal-degraders, the compositional changes in some of the different OM fractions, and trends in carbon consumption related to methane production across coal seams along the vertical SO 4 2− gradient.

Montana, Wyoming↗
USGS2023

Scanning electron microscopic evaluation of broad ion beam milling effects to sedimentary organic matter: Sputter-induced artifacts or naturally occurring porosity?

Research examining organic-matter hosted porosity has significantly increased during the last decade due to greater focus on understanding hydrocarbon migration and storage in source-rock reservoirs, and technological advances in scanning electron microscopy (SEM) capabilities. The examination of nanometer-scale organic-matter hosted porosity by SEM requires the preparation of exceptionally flat geologic samples beyond the abilities of traditional mechanical polishing, which can deform or otherwise obscure organic surfaces. To meet this demand, broad ion beam (BIB) milling was introduced as a sample preparation technique for SEM petrographic analysis of geologic samples. As with any sample preparation technique, there can be unintended consequences. In this study, we examined the development of nanometer-scale sputter-induced voids caused by BIB milling of thermoset plastic binder material [poly(methyl methacrylate), PMMA] used for the mounting of geologic samples, and artifact sputter-induced voids in the organic matter of Green River Formation and Kimmeridge Clay Formation source rocks. Development of artifact sputter-induced voids was evaluated in relation to variations in the slope of the sample examination surface (0.0–4.9% slope), effectively varying the angle of ion incidence. The results indicate that only minor variations in the angle of ion incidence can generate sputter-induced voids in both PMMA (10.0–386.2 nm diameter sputter-induced voids) and sample sedimentary organic matter (solid bitumen; 12.2–103.6 nm diameter sputter-induced voids). Overall, average artifact pore diameters increased with increasing ion incidence angle within PMMA. Although sputter-induced voids within solid bitumen in the Green River Formation sample were only found in limited extent, the size of these void artifacts falls within the same size range as naturally occurring meso-macroporosity. That is, the pore-like artifacts could easily be misconstrued as naturally developed organic porosity, which is a major concern for SEM-based porosity evaluation methods. This study describes the factors that contribute to the creation of artifact sputter-induced voids, their distinguishing characteristics, and best practices for avoiding the creation of ion-induced artifacts.

International Journal of Coal Geology↗
USGS1993

Regional and economic geology of Pennsylvanian age coal beds of West Virginia

West Virginia is the only place in the United States where an entire section of Pennsylvanian age (Upper Carboniferous) strata can be seen. These strata occur within a wedge of rock that thins to the north and west from the southeastern part of the State. The progressive north-northwesterly termination of older Pennsylvanian geologic units beneath younger ones prominently outlines the center of the Appalachian basin of West Virginia. Over most of West Virginia, Lower and/or Middle Pennsylvanian strata unconformably overly Upper Mississippian (Lower Carboniferous) strata. Sediment deposition was accomplished by a complex system of deltas prograding north and west from an eastern and southeastern source area. More than 100 named coal beds occur within the Lower, Middle, and Upper Pennsylvanian rocks of West Virginia and at least 60 of these have been or are currently being mined commercially. Collectively, these coal beds account for original in-ground coal resources of almost 106.1×10 9 t (117×10 9 tons). West Virginia ranks fourth in the United States in demonstrated coal reserves. In 1988, West Virginia produced 131.4×10 6 t (144.9×10 6 T) of coal, third highest in the United States. Of this annual production, 75% was from underground mines. In 1988, West Virginia led the nation in the number of longwall mining sections currently in place. West Virginia's low-volatile coal beds are known worldwide as important metallurgical-grade coals, while the higher-volatile coal beds are utilized primarily for steam production.

International Journal of Coal Geology↗
USGS2001

Geology, coal quality, and resources of the Antaramut-Kurtan-Dzoragukh coal field, north-central Armenia

The Antaramut-Kurta-Dzoragukh (AKD) coal deposit is a previously unrecognized coal field in north-central Armenia. Coal has been known to exist in the general vicinity since the turn of the century, but coal was thought to be restricted to a small (1 km2) area only near the village of Antaramut. However, through detailed field work and exploratory drilling, this coal deposit has been expanded to at least 20 km2, and thus renamed the Antaramut-Kurtan-Dzoragukh coal field, for the three villages that the coal field encompasses. The entire coal-bearing horizon, a series of tuffaceous sandstones, siltstones, and claystones, is approximately 50 m thick. The AKD coal field contains two coal beds, each greater than 1 m thick, and numerous small rider beds, with a total resource of approximately 31,000,000 metric tonnes. The coals are late Eocene in age, high volatile bituminous in rank, relatively high in ash yield (approximately 40%, as-determined basis) and moderate in sulfur content (approximately 3%, as-determined basis). The two coal beds (No. 1 and No. 2), on a moist, mineral-matter-free basis, have high calorific values of 32.6 MJ/kg (7796 cal/g) and 36.0 MJ/kg (8599 cal/g), respectively. Coal is one of the few indigenous fossil fuel resources occurring in Armenia and thus, the AKD coal field could potentially provide fuel for heating and possibly energy generation in the Armenian energy budget. Published by Elsevier Science B.V.

International Journal of Coal Geology↗
USGS2010

Coalbed methane resources of the Appalachian Basin, eastern USA

In 2002, the U.S. Geological Survey (USGS) assessed the technically recoverable, undiscovered coalbed-gas resources in the Appalachian basin and Black Warrior basin Assessment Provinces as about 15.5 trillion cubic feet. Although these resources are almost equally divided between the two areas, most of the production occurs within relatively small areas within these Provinces, where local geological and geochemical attributes have resulted in the generation and retention of large amounts of methane within the coal beds and have enhanced the producibility of the gas from the coal. In the Appalachian basin, coalbed methane (CBM) tests are commonly commercial where the cumulative coal thickness completed in wells is greater than three meters (10 ft), the depth of burial of the coal beds is greater than 100 m (350 ft), and the coal is in the thermogenic gas window. In addition to the ubiquitous cleating within the coal beds, commercial production may be enhanced by secondary fracture porosity related to supplemental fracture systems within the coal beds. In order to release the methane from microporus coal matrix, most wells are dewatered prior to commercial production of gas. Two Total Petroleum Systems (TPS) were defined by the USGS during the assessment: the Pottsville Coal-bed gas TPS in Alabama, and the Carboniferous Coal-bed Gas TPS in Pennsylvania, Ohio, West Virginia, eastern Kentucky, Virginia, Tennessee, and Alabama. These were divided into seven assessment units, of which three had sufficient data to be assessed. Production rates are higher in most horizontal wells drilled into relatively thick coal beds, than in vertical wells; recovery per unit area is greater, and potential adverse environmental impact is decreased.

Alabama, Georgia, Kentucky, Maryland, North Caroli↗
USGS1998

The central and northern Appalachian Basin-a frontier region for coalbed methane development

The Appalachian basin is the world's second largest coalbed-methane (CBM) producing basin. It has nearly 4000 wells with 1996 annual production at 147.8 billion cubic feet (Bcf). Cumulative CBM production is close to 0.9 trillion cubic feet (Tcf). The Black Warrior Basin of Alabama in the southern Appalachian basin (including a very minor amount from the Cahaba coal field) accounts for about 75% of this annual production and about 75% of the wells, and the remainder comes from the central and northern Appalachian basin. The Southwest Virginia coal field accounts for about 95% of the production from the central and northern parts of the Appalachian basin. Production data and trends imply that several of the Appalachian basin states, except for Alabama and Virginia, are in their infancy with respect to CBM development. Total in-place CBM resources in the central and northern Appalachian basin have been variously estimated at 66 to 76 trillion cubic feet (Tcf), of which an estimated 14.55 Tcf (~ 20%) is technically recoverable according to a 1995 U.S. Geological Survey assessment. For comparison in the Black Warrior basin of the 20 Tcf in-place CBM resources, 2.30 Tcf (~ 12%) is technically recoverable. Because close to 0.9 Tcf of CBM has already been produced from the Black Warrior basin and the proved reserves are about 0.8 Tcf for 1996 [Energy Information Administration (EIA), 1997]. U.S. Crude Oil, Natural Gas, and Natural Gas Liquids Reserves, 1996 Annual Report. U.S. Department of Energy DOE/EIA-0216(96), 145 pp.], these data imply that the central and northern Appalachian basin could become increasingly important in the Appalachian basin CBM picture as CBM resources are depleted in the southern Appalachian basin (Black Warrior Basin and Cahaba Coal Field). CBM development in the Appalachian states could decrease the eastern U.S.A.'s dependence on coal for electricity. CBM is expected to provide over the next few decades a virtually untapped source of unconventional fossil fuel in the Appalachian states, where the CBM resources are large and the demand for cleaner fossil-fuel energy is high.The central and northern Appalachian basin could become increasingly important in the Appalachian basin coalbed methane (CBM) picture as CBM resources are depleted in the southern Appalachian basin. Total in-place CBM resources in the central and the northern Appalachian basin have been estimated at 66 to 76 Tcf, of which 14.55 Tcf is technically recoverable.

International Journal of Coal Geology↗
USGS2010

Geologic controls on thermal maturity patterns in Pennsylvanian coal-bearing rocks in the Appalachian basin

Thermal maturation patterns of Pennsylvanian strata in the Appalachian basin were determined by compiling and contouring published and unpublished vitrinite reflectance (VR) measurements. VR isograd values range from 0.6% in eastern Ohio and eastern Kentucky (western side of the East Kentucky coal field) to greater than 5.5% in eastern Pennsylvania (Southern Anthracite field, Schuylkill County), corresponding to ASTM coal rank classes of high volatile C bituminous to meta-anthracite. VR isograds show that thermal maturity of Pennsylvanian coals generally increases from west to east across the basin. The isograds patterns, which are indicative of maximum temperatures during burial, can be explained by variations in paleodepth of burial, paleogeothermal gradient, or a combination of both. However, there are at least four areas of unusually high-rank coal in the Appalachian basin that depart from the regional trends and are difficult to explain by depth of burial alone: 1) a west-northwestward salient centered in southwestern Pennsylvania; 2) an elliptically-shaped, northeast-trending area centered in southern West Virginia and western Virginia; 3) the eastern part of Black Warrior coal field, Alabama; and 4) the Pennsylvania Anthracite region, in eastern Pennsylvania. High-rank excursions in southwest Pennsylvania, the Black Warrior coal field, and the Pennsylvania Anthracite region are interpreted here to represent areas of higher paleo-heat flow related to syntectonic movement of hot fluids towards the foreland, associated with Alleghanian deformation. In addition to higher heat flow from fluids, the Pennsylvania Anthracite region also experienced greater depth of burial. The high-rank excursion in southwest Virginia was probably primarily controlled by overburden thickness, but may also have been influenced by higher geothermal gradients.

Appalachian basin↗
USGS2001

A geostatistical approach to predicting sulfur content in the Pittsburgh coal bed

The US Geological Survey (USGS) is completing a national assessment of coal resources in the five top coal-producing regions in the US. Point-located data provide measurements on coal thickness and sulfur content. The sample data and their geologic interpretation represent the most regionally complete and up-to-date assessment of what is known about top-producing US coal beds. The sample data are analyzed using a combination of geologic and Geographic Information System (GIS) models to estimate tonnages and qualities of the coal beds. Traditionally, GIS practitioners use contouring to represent geographical patterns of "similar" data values. The tonnage and grade of coal resources are then assessed by using the contour lines as references for interpolation. An assessment taken to this point is only indicative of resource quantity and quality. Data users may benefit from a statistical approach that would allow them to better understand the uncertainty and limitations of the sample data. To develop a quantitative approach, geostatistics were applied to the data on coal sulfur content from samples taken in the Pittsburgh coal bed (located in the eastern US, in the southwestern part of the state of Pennsylvania, and in adjoining areas in the states of Ohio and West Virginia). Geostatistical methods that account for regional and local trends were applied to blocks 2.7 mi (4.3 km) on a side. The data and geostatistics support conclusions concerning the average sulfur content and its degree of reliability at regional- and economic-block scale over the large, contiguous part of the Pittsburgh outcrop, but not to a mine scale. To validate the method, a comparison was made with the sulfur contents in sample data taken from 53 coal mines located in the study area. The comparison showed a high degree of similarity between the sulfur content in the mine samples and the sulfur content represented by the geostatistically derived contours. Published by Elsevier Science B.V.

International Journal of Coal Geology↗
USGS2010

Effect of concentration of dispersed organic matter on optical maturity parameters: Interlaboratory results of the organic matter concentration working group of the ICCP.

The main objective of this work was to study the effect of the kerogen isolation procedures on maturity parameters of organic matter using optical microscopes. This work represents the results of the Organic Matter Concentration Working Group (OMCWG) of the International Committee for Coal and Organic Petrology (ICCP) during the years 2008 and 2009. Four samples have been analysed covering a range of maturity (low and moderate) and terrestrial and marine geological settings. The analyses comprise random vitrinite reflectance measured on both kerogen concentrate and whole rock mounts and fluorescence spectra taken on alginite. Eighteen participants from twelve laboratories from all over the world performed the analyses. Samples of continental settings contained enough vitrinite for participants to record around 50 measurements whereas fewer readings were taken on samples from marine setting. The scatter of results was also larger in the samples of marine origin. Similar vitrinite reflectance values were in general recorded in the whole rock and in the kerogen concentrate. The small deviations of the trend cannot be attributed to the acid treatment involved in kerogen isolation but to reasons related to components identification or to the difficulty to achieve a good polish of samples with high mineral matter content. In samples difficult to polish, vitrinite reflectance was measured on whole rock tended to be lower. The presence or absence of rock fabric affected the selection of the vitrinite population for measurement and this also had an influence in the average value reported and in the scatter of the results. Slightly lower standard deviations were reported for the analyses run on kerogen concentrates. Considering the spectral fluorescence results, it was observed that the ??max presents a shift to higher wavelengths in the kerogen concentrate sample in comparison to the whole-rock sample, thus revealing an influence of preparation methods (acid treatment) on fluorescence properties. ?? 2010 Elsevier B.V.

International Journal of Coal Geology↗
USGS2014

Organic petrology of the Aptian-age section in the downdip Mississippi Interior Salt Basin, Mississippi, USA: Observations and preliminary implications for thermal maturation history

This study identifies a thermal maturity anomaly within the downdip Mississippi Interior Salt Basin (MISB) of southern Mississippi, USA, through examination of bitumen reflectance data from Aptian-age strata (Sligo Formation, Pine Island Shale, James Limestone, and Rodessa Formation). U.S. Geological Survey (USGS) reconnaissance investigations conducted in 2011–2012 examined Aptian-age thermal maturity trends across the onshore northern Gulf of Mexico region and indicated that the section in the downdip MISB is approaching the wet gas/condensate window (R o ~1.2%). A focused study in 2012–2013 used 6 whole core, one sidewall core, and 49 high-graded cutting samples (depth range of 13,000–16,500 ft [3962.4–5029.2 m] below surface) collected from 15 downdip MISB wells for mineralogy, fluid inclusion, organic geochemistry, and organic petrographic analysis. Based on native solid bitumen reflectance (R o generally > 0.8%; interpreted to be post-oil indigenous bitumens matured in situ), R o values increase regionally across the MISB from the southeast to the northwest. Thermal maturity in the eastern half of the basin (R o range 1.0 to 1.25%) appears to be related to present-day burial depth and shows a gradual increase with respect to depth. To the west, thermal maturity continues to increase even as the Aptian section shallows structurally on the Adams County High (R o range 1.4 to > 1.8%). After evaluating the possible thermal agents responsible for increasing maturity at shallower depths (i.e., igneous activity, proximity to salt, variations in regional heat flux, and uplift), we tentatively propose that either greater paleoheat flow or deeper burial coupled with uplift in the western part of the MISB could be responsible for the thermal maturity anomaly. Further research and additional data are needed to determine the cause(s) of the thermal anomaly.

International Journal of Coal Geology↗
USGS2010

Interpretation and analysis of planetary structures

Structural geology is an integral part of planetary science. Planetary structures provide the framework for determining the character and sequence of crustal deformation while simultaneously establishing the observational basis required to test geodynamic hypotheses for the deformation of planetary and satellite lithospheres. The availability of datasets that record spatial and topographic information with a resolution that matches or, in many cases, exceeds, what is available for Earth-based studies permits the deformation of several planets and satellites to be investigated down to the local or outcrop scales. The geometry and kinematics of common planetary structures such as joints, igneous dikes, deformation bands, faults, and folds can be determined with confidence from their distinctive morphologic and topographic signatures, enabling the structural histories and deformation magnitudes to be determined. Segmentation, displacement profiles, relay ramps, footwall anticlines, displacement-controlled depocenters, and other well-known characteristics of terrestrial normal fault and graben systems reveal the sequence and processes of fault growth in numerous planetary examples. Systems of thrust faults having both blind and surface-breaking components are important elements on several bodies including Mercury, the Moon, and Mars. Strike-slip faults have been identified on bodies including Mars and Europa with oblique extension found on Ganymede. Using field-based studies of Earth-based structures as a guide, planetary structures provide a means to explore and evaluate the causative stresses. Despite the wide range in structural styles across the solar system, plate tectonics is recognized only on the Earth, with the other planets and satellites deforming in the absence of large-scale horizontal motions and attendant plate recycling.

Journal of Structural Geology↗
USGS2022

Evaluating aromatization of solid bitumen generated in the presence and absence of water: Implications for solid bitumen reflectance as a thermal proxy

Geological models for petroleum generation suggest thermal conversion of oil-prone sedimentary organic matter in the presence of water promotes increased liquid saturate yield, whereas absence of water causes formation of an aromatic, cross-linked solid bitumen residue. To test the influence of hydrogen from water, organic-rich (22 wt% total organic carbon , TOC) mudrock samples from the Eocene lacustrine Green River Formation Mahogany zone oil shale were pyrolyzed under hydrous and anhydrous conditions in closed system batch reactors at temperatures between 300 and 370 °C for 72 h. Pre- and post-pyrolysis samples were characterized using petrographic approaches including optical microscopy , reflectance, Raman spectroscopy , and scanning electron and transmission electron microscopy to quantify differences in relative appearance, abundance, and composition of solid bitumen newly generated during the pyrolysis experiments. Petrographic analyses were supplemented by geochemical screening measurements (TOC content and programmed temperature pyrolysis). Results show post-hydrous pyrolysis residues contain lower TOC, are comprised of solid bitumen with greater aromaticity , and have textures indicative of lower viscosities, relative to anhydrous residues from the same temperature pyrolysis conditions. These observations suggest solid bitumen forming from thermal conversion of oil-prone sedimentary organic matter under anhydrous conditions may be less aromatic, although more cross-linked, than solid bitumen forming under hydrous conditions at the same time-temperature combination. To explain these results, we suggest that a radical disproportionation mechanism is favored in the presence of hydrogen donated from water, and that this disproportionation promotes aromatization in the solid residue with concomitant expulsion of saturated hydrocarbons.

International Journal of Coal Geology↗
USGS2003

Evaluation of undiscovered natural gas in the Upper Cretaceous Ferron Coal/Wasatch Plateau Total Petroleum System, Wasatch Plateau and Castle Valley, Utah

The Total Petroleum System approach was used to estimate undiscovered gas potential of the Wasatch Plateau and Castle Valley, central Utah. The Ferron Coal/Wasatch Plateau Total Petroleum System was geologically defined and subdivided into seven assessment units, six of which were formally evaluated. Geologic data considered in defining the assessment unit boundaries included thermal maturity, coal presence and thickness, overburden thickness, and faulting intensity. Historical production data were also used to estimate volumes of gas from undrilled areas. The one conventional assessment unit includes almost the entire area of the petroleum system and is characterized by known accumulations that occur in structural or combination traps in sandstone reservoirs. The estimated undiscovered conventional producible gas that may be added to reserves of this unit ranges from a low (F95) of 14.8 billion cubic feet (BCFG) [419 million cubic meters (Mm3)] of gas to a high (F5) of 82 BCFG [2321 Mm3] and a mean value of 39.9 BCFG [1130 Mm3]. Continuous gas accumulations are those in which the entire assessment unit is considered to be gas-charged. Within these assessment units, there may be wells drilled that are not economic successes but all are expected to contain gas. Coalbed gas is in this continuous category. Mean estimates of undiscovered gas for the five continuous assessment units are: (1) Northern Coal Fairway/Drunkards Wash-752.3 BCFG [21,323 Mm3]; (2) Central Coal Fairway/Buzzard Bench-536.7 BCFG [15,194 Mm3]; (3) Southern Coal Fairway-152.6 BCFG [4320 Mm3]; (4) Deep (6000 feet plus) Coal and Sandstone-59.1 BCFG [1673 Mm3]; (5) Southern Coal Outcrop-10.6 BCFG [300 Mm3]; and Joes Valley and Musinia Grabens-not assessed.The mean estimate of undiscovered gas for the entire TPS is 1551.2 BCFG [43,914 Mm3]. There is a 95% chance that at least 855.7 BCFG [24,225 Mm3] and a 5% chance that at least 2504 BCFG [70,888 Mm3] of undiscovered producible gas remain in the TPS. ?? 2003 Published by Elsevier B.V.

International Journal of Coal Geology↗
USGS2001

The geology and palynology of lower and Middle Pennsylvanian strata in the Western Kentucky Coal Field

The Western Kentucky Coal Field is the southern tip of the Eastern Interior, or Illinois Basin. Pennsylvanian rocks in this area, which include conglomerate, sandstone, shale, limestone and coal, were deposited primarily in coastal-deltaic settings at a time when western Kentucky was located close to the equator. This paper discusses temporal changes in regional sedimentation patterns and coal-forming floras of Lower and Middle Pennsylvanian strata in the Western Kentucky Coal Field. Lower Pennsylvanian strata of the Caseyville Formation are characterized by paleovalley-filling sedimentation patterns and extabasinal quartz pebbles. Caseyville Formation coals are characterized thin and discontinuous and were strongly influenced by subsidence within underlying paleovalleys, and the dissected lower Pennsylvanian paleotopography. Caseyville coals are commonly dominated by Lycospora, but can also have variable palynofloras, which probably reflects variable edaphic conditions and edge effects within small, patchy paleomires. Tradewater Formation strata show increased marine influences and tidal-estuarine sedimentation, especially in the middle and upper parts. Coal beds in the lower part of the Tradewater typically are thin and discontinuous, although some economically important beds are present. Coals become thicker, more abundant and more laterally persistent towards the top of the formation. Palynologically, lower and middle Tradewater Formation coals are dominated by Lycospora, but begin to show increased amounts of tree fern spores. Middle and upper Tradewater coals are thicker and more continuous, and contain high percentages of tree fern spores. In addition, cordaite pollen is locally abundant in this interval. Carbondale and Shelburn (Desmoinesian) strata are much more laterally continuous, and occur within classic cyclothems that can be traced across the coal field. Cyclothems have long been interpreted as being eustatically driven, and glacio-eustacy controlled not only sedimentation but also the formation of Desmoinesian paleomires. Palynologically, Carbondale and Shelburn coals are either dominated by Lycospora or have heterogeneous palynofloras. Palynologic and coal-quality data suggest that hydrologic base level may have been the primary control on Desmoinesian paleomires, rather than paleoclimate, as the coals display rheotrophic, rather than ombrotrophic characteristics. ?? 2001 Elsevier Science B.V. All rights reserved.

International Journal of Coal Geology↗
USGS1996

Paleoslumps in coal-bearing strata of the Breathitt Group (Pennsylvanian), Eastern Kentucky Coal Field, U.S.A

The benefits of geologic analysis for roof-control studies and hazard prediction in coal mines are well documented. Numerous case studies have illustrated the importance of recognizing geologic features such as paleochannels, coal riders, and kettlebottoms in mine roofs. Relatively understudied features, in terms of mining, are paleoslumps .Paleoslumps represent ancient movement and rotation of semi-consolidated sediment. Because bedding in paleoslumps is deformed or inclined, these features cause instability in mine roofs, haul roads, surface highwalls, and other excavations. Various types of paleoslumps above coals in the Eastern Kentucky Coal Field were studied in order to aid in their recognition and prediction in mines. The paleoslumps studied all showed characteristic slump-deformation features, although some differences in magnitude of deformation and overall slump size were noted. Coals beneath slumps often exhibited folding, reverse displacements, truncation, clastic dikes, and locally increased thickness. Slumps are inferred to have been triggered by a wide range of mechanisms, such as loading of water-saturated sediment on rigid substrates, synsedimentary faulting, and over-pressurization of channel margin and bar slopes. Analysis of paleoslumps in underground mines, where paleoslumps are viewed from beneath rather than in profile is difficult, since characteristic bed rotation may not be conspicuous. Sudden increases in bed-dip angle inferred from changes in rock type or bedding contacts in the roof; occurrence of bounding, polished rotation surfaces; or roof irregularity and occurrence of loading features may indicate the presence of paleoslumps. Another key to recognition may be the sudden appearance of over-thickened coal, which can occur because of slump-created paleotopography, synsedimentary faults, and slump-generated overthrusting. In addition, steeply inclined, folded, or transported coal marginal to paleoslumps can create apparent increases in coal thickness in cores. Although thick coals are obviously a target of exploration, anomalously thick coals may actually indicate adjacent paleoslumps accompanied by hazardous roof conditions and loss of seam thickness.

International Journal of Coal Geology↗
USGS2008

One-dimensional thermal modelling of Acadian metamorphism in southern Vermont, USA

One-dimensional thermal (1DT) modelling of an Acadian (Devonian) tectonothermal regime in southern Vermont, USA, used measured metamorphic pressures and temperatures and estimated metamorphic cooling ages based on published thermobarometric and geochronological studies to constrain thermal and tectonic input parameters. The area modelled lies within the Vermont Sequence of the Acadian orogen and includes: (i) a western domain containing garnet-grade pre-Silurian metasedimentary and metavolcanic rocks from the eastern flank of an Acadian composite dome structure (Rayponda-Sadawga Dome); and (ii) an eastern domain containing similar, but staurolite- or kyanite-grade, rocks from the western flank of a second dome structure (Athens Dome), approximately 10 km farther east. Using reasonable input parameters based on regional geological, petrological and geochronological constraints, the thermal modelling produced plausible P-T paths, and temperature-time (T-t) and pressure-time (P-t) curves. Information extracted from P-T-t modelling includes values of maximum temperature and pressure on the P-T paths, pressure at maximum temperature, predicted Ar closure ages for hornblende, muscovite and K-feldspar, and integrated exhumation and cooling rates for segments of the cooling history. The results from thermal modelling are consistent with independently obtained pressure, temperature and Ar cooling age data on regional metamorphism in southern Vermont. Modelling results provide some important bounding limits on the physical conditions during regional metamorphism, and indicate that the pressure contemporaneous with the attainment of peak temperature was probably as much as 2.5 kbar lower than the actual maximum pressure experienced by rocks along various particle paths. In addition, differences in peak metamorphic grade (garnet-grade versus staurolite-grade or kyanite-grade) and peak temperature for rocks initially loaded to similar crustal depths, differences in calculated exhumation rates, and differences in 40Ar/39Ar closure ages are likely to have been consequences of variations in the duration of isobaric heating (or 'crustal residence periods') and tectonic unroofing rates. Modelling results are consistent with a regional structural model that suggests west to east younging of specific Acadian deformational events, and therefore diachroneity of attainment of peak metamorphic conditions and subsequent 40Ar/39Ar closure during cooling. Modelling is consistent with the proposition that regional variations in timing and peak conditions of metamorphism are the result of the variable depths to which rocks were loaded by an eastward-thickening thrust-nappe pile rooted to the east (New Hampshire Sequence), as well as by diachronous structural processes within the lower plate rocks of the Vermont Sequence.

Journal of Metamorphic Geology↗
USGS2004

Geologic history of natural coal-bed fires, Powder River basin, USA

Coal-bed fires ignited by natural processes have baked and fused overlying sediments to form clinker, a hard red or varicolored rock, through much of the northern Great Plains of the United States (USA). The gently dipping coal beds in the region burn when regional downwasting brings them above the local water table. The resulting clinker forms a rim along the exposed edge of the coal bed in an ongoing process through geologic time. The resistant clinker is left capping buttes and ridges after the softer unbaked strata erode away. Clinker outcrops cover more than 4100 km2 in the Powder River basin (PRB), which lies in Wyoming (WY) and Montana (MT). The clinker in place records tens of billions of tons of coal that have burned, releasing gases into the atmosphere. The amount of clinker that has eroded away was at least an order of magnitude greater than the clinker that remains in place. Fission-track and uranium-thorium/ helium ages of detrital zircon crystals in clinker, and paleomagnetic ages of clinker, show that coal beds have burned naturally during at least the past 4 million years (Ma). The oldest in-place clinker that has been dated, collected from a high, isolated, clinker-capped ridge, has a fission track age of 2.8??0.6 Ma. Evidence of erosion and downcutting is also preserved by clinker clasts in gravel terraces. One clinker boulder in a terrace 360 m above the Yellowstone River has a fission track age of 4.0??0.7 Ma. Coal-bed fires are caused by lightning, wildfires, spontaneous combustion, or human activity on coal outcrops and in mines. Miners, government agencies, and ranchers have extinguished thousands of coal bed fires, but natural ignition continues where fresh coal has access to air. At any given time, hundreds of fires, mostly small, are burning. In the Powder River basin, the total amount of coal burned by natural fires in the last 2 Ma is one to two orders of magnitude greater than the total amount of coal removed by mining in the past century. However, current annual rates of coal mining are three to four orders of magnitude greater than estimated prehistoric annual rates of coal consumption by natural fires. ?? 2004 Published by Elsevier B.V.

International Journal of Coal Geology↗