Search USGSSearch

SEARCH · Search USGS

Results for “Earth Science”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15Linked to original sources

Groundwater–surface-water exchange and the geologic setting of northern Minnesota's lakes, wetlands, and streams—Modern-day relevance of Tom Winter's legacy

Tom Winter spent nearly 50 years conducting research in earth science, and he specialized in the exchange between groundwater and surface water. Tom's highly productive career began in Minnesota. This fi eld trip revisits many of the places where Tom conducted his early research and demonstrates the continuing relevance of that research. Stops and topics include the groundwater infl uence on the record low stage of White Bear Lake, the contribution of groundwater to continually rising water levels in an abandoned open-pit iron mine, hydrogeology of the Shingobee headwaters aquatic ecosystem research site, hydrogeology of Lake Sallie, geology associated with the Pillager water gap, and the hydrogeology of Little Rock Lake.

GSA Field Guides

Analysis of Neogene deformation between Beaver, Utah and Barstow, California: Suggestions for altering the extensional paradigm

For more than two decades, the paradigm of large-magnitude (~250 km), northwest-directed (~N70°W) Neogene extensional lengthening between the Colorado Plateau and Sierra Nevada at the approximate latitude of Las Vegas has remained largely unchallenged, as has the notion that the strain integrates with coeval strains in adjacent regions and with plate-boundary strain. The paradigm depends on poorly constrained interconnectedness of extreme-case lengthening estimated at scattered localities within the region. Here we evaluate the soundness of the inferred strain interconnectedness over an area reaching 600 km southwest from Beaver, Utah, to Barstow, California, and conclude that lengthening is overestimated in most areas and, even if the estimates are valid, lengthening is not interconnected in a way that allows for published versions of province-wide summations. We summarize Neogene strike slip in 13 areas distributed from central Utah to Lake Mead. In general, left-sense shear and associated structures define a broad zone of translation approximately parallel to the eastern boundary of the Basin and Range against the Colorado Plateau, a zone we refer to as the Hingeline shear zone. Areas of steep-axis rotation (ranging to 2500 km 2 ) record N-S shortening rather than unevenly distributed lengthening. In most cases, the rotational shortening and extension-parallel folds and thrusts are coupled to, or absorb, strike slip, thus providing valuable insight into how the discontinuous strike-slip faults are simply parts of a broad zone of continuous strain. The discontinuous nature of strike slip and the complex mixture of extensional, contractional, and steep-axis rotational structures in the Hingeline shear zone are similar to those in the Walker Lane belt in the west part of the Basin and Range, and, together, the two record southward displacement of the central and northern Basin and Range relative to the adjacent Colorado Plateau. Understanding this province-scale coupling is critical to understanding major NS shortening and westerly tectonic escape in the Lake Mead area. One north-elongate uplift in the Hingeline shear zone is a positive flower structure along a strike-slip fault, and we postulate that most other large uplifts are diapiric, resulting from extension-normal inflow of ductile substrate, rather than second-order isostatic responses to tectonic unloading. We also postulate that large steep-axis rotations, and some small ones as well, result from basal tractions imparted by gradients in southerly directed subjacent ductile flow rather than by shear coupling imparted by laterally variable elongation strains. The shortening strain recorded in the rotations and related structures probably matches or exceeds the magnitude of lengthening, even for the Lake Mead area where we do not question local large (~65 km) west-directed lengthening. We assess the results of extensive recent earth-science research in the Lake Mead area and conclude that previously published models of N-S convergence, westerly tectonic rafting, and N-S occlusion are valid and record unique tectonic escape accommodation for south-directed displacement of the Great Basin sector of the Basin and Range. Genetic ties between the south-directed displacement and plate-interaction forces are elusive, and we suggest the displacement results from body forces inherent in the Basin and Range.

Arizona, California, Nevada, Utah

Effects of Cenozoic subduction along the outboard margin of the Northern Cordillera: Derived from e-book on the Northern Cordillera (Alaska and Western Canada) and adjacent marine areas

This article describes the regional effects of Cenozoic subduction along the outboard margin of the Northern Cordillera (Alaska, USA, and Western Canada), and thereby acquaints the reader with several chapters of the e-book Dynamic Geology of the Northern Cordillera (Alaska, Western Canada, and Adjacent Marine Areas) . This article and the e-book are written for earth-science students and teachers. The level of writing for the article and the source e-book is that of popular science magazines, and readers are encouraged to share this article with students and laypersons. The main thrust of the article is to present and describe a suite of ten regional topographic, bathymetric, and geologic maps, and two figures portraying deep-crustal sections that illustrate the regional effects of Cenozoic subduction along the outboard margin of the North American Cordillera. The regional maps and cross sections are described in a way that a teacher might describe a map to students. Cenozoic subduction along the margin of the Northern Cordillera resulted in the formation of the following: (1) underthrusting of terranes and oceanic lithosphere beneath Southern Alaska; (2) landscapes, including narrow continental shelves along Southern and Southeastern Alaska and Western Canada (the Canadian Cordillera) and continental-margin mountain ranges, including the Alaska Peninsula, Chugach Range, Saint Elias Mountains, and Cascade Mountains; (3) sedimentary basins; (4) an array of active continental strike-slip and thrust faults (inboard of subduction zones); (5) earthquake belts related to subduction of terranes and oceanic plates; (6) active volcanoes, including continental-margin arcs (the Aleutian, Wrangell, and Cascade Arcs) linked to subduction zones, and interior volcanic belts related to strike-slip faulting or to hot spots; (7) lode and placer mineral deposits related to continental margin arcs or subduction of oceanic ridges; (8) hot springs related to continental-margin arcs; (9) plate movements as recorded from GPS measurements; and (10) underthrusting of terranes and oceanic lithosphere beneath the Northern Cordillera.

Alaska, British Columbia, Idaho, Montana, Washingt

Geologic Settings of Subsidence

This paper reviews the role of geologic processes that contribute to subsidence in order to aid those starting investigations of ground-surface subsidence. Subsidence occurs, or at least is discovered, only infrequently, and little organized information has been available. In order to assess our present state of knowledge, the author gathered fragmentary bits of information from many sources widely scattered in the literature of geology and other earth sciences. The author cites examples for each geologic process that is a potential contributor to ground-surface subsidence together with geologic evidence for diagnosing their causes. The geologic processes involved are: (1) solution of gypsum and salt and redistribution of transient fill materials through solution cavities in calcareous rocks; (2) underground erosion of uncemented or lightly cemented silt and sand through temporary underground passageways; (3) lateral plastic flow of salt, gypsum and anhydrite, shale, and clay under loading; (4) compaction of sediments by loading, drainage, vibration, and hydrocompaction; (5) tectonic movements including primary and secondary effects of earthquakes, folding, and warping; and (6) volcanic activity. Because the first four processes may be accelerated by various engineering activities, examples have been selected to illustrate subsidence both under natural conditions and under conditions modified by man's activities. Although this extensive search for existing information on the role of geologic factors in subsidence indicates that much detailed work remains to be done, the future prospects for advancing our geologic knowledge are excellent. Methods of measuring ground-surface displacements are improving rapidly. Also, broadly based investigations of known areas of major subsidence throughout the world are developing new methods of diagnosis and treatment and are yielding quantitative data that will aid our evaluation of the rates and magnitude of present-day geologic processes.

Book chapter

The influence of hazard models on GIS-based regional risk assessments and mitigation policies

Geographic information systems (GIS) are important tools for understanding and communicating the spatial distribution of risks associated with natural hazards in regional economies. We present a GIS-based decision support system (DSS) for assessing community vulnerability to natural hazards and evaluating potential mitigation policy outcomes. The Land Use Portfolio Modeler (LUPM) integrates earth science and socioeconomic information to predict the economic impacts of loss-reduction strategies. However, the potential use of such systems in decision making may be limited when multiple but conflicting interpretations of the hazard are available. To explore this problem, we conduct a policy comparison using the LUPM to test the sensitivity of three available assessments of earthquake-induced lateral-spread ground failure susceptibility in a coastal California community. We find that the uncertainty regarding the interpretation of the science inputs can influence the development and implementation of natural hazard management policies. Copyright ?? 2006 Inderscience Enterprises Ltd.

International Journal of Risk Assessment and Manag

A time-dependent probabilistic seismic-hazard model for California

For the purpose of sensitivity testing and illuminating nonconsensus components of time-dependent models, the California Department of Conservation, Division of Mines and Geology (CDMG) has assembled a time-dependent version of its statewide probabilistic seismic hazard (PSH) model for California. The model incorporates available consensus information from within the earth-science community, except for a few faults or fault segments where consensus information is not available. For these latter faults, published information has been incorporated into the model. As in the 1996 CDMG/U.S. Geological Survey (USGS) model, the time-dependent models incorporate three multisegment ruptures: a 1906, an 1857, and a southern San Andreas earthquake. Sensitivity tests are presented to show the effect on hazard and expected damage estimates of (1) intrinsic (aleatory) sigma, (2) multisegment (cascade) vs. independent segment (no cascade) ruptures, and (3) time-dependence vs. time-independence. Results indicate that (1) differences in hazard and expected damage estimates between time-dependent and independent models increase with decreasing intrinsic sigma, (2) differences in hazard and expected damage estimates between full cascading and not cascading are insensitive to intrinsic sigma, (3) differences in hazard increase with increasing return period (decreasing probability of occurrence), and (4) differences in moment-rate budgets increase with decreasing intrinsic sigma and with the degree of cascading, but are within the expected uncertainty in PSH time-dependent modeling and do not always significantly affect hazard and expected damage estimates.

California

Differential energy radiation from two earthquakes in Japan with identical M w : The Kyushu 1996 and Tottori 2000 earthquakes

We examine two closely located earthquakes in Japan that had identical moment magnitudes M w but significantly different energy magnitudes M e . We use teleseismic data from the Global Seismograph Network and strong-motion data from the National Research Institute for Earth Science and Disaster Prevention's K-Net to analyze the 19 October 1996 Kyushu earthquake (M w 6.7, M e 6.6) and the 6 October 2000 Tottori earthquake (M w 6.7, M e 7.4). To obtain regional estimates of radiated energy E S we apply a spectral technique to regional (<200 km) waveforms that are dominated by S and Lg waves. For the thrust-fault Kyushu earthquake, we estimate an average regional attenuation Q(f) 230f 0:65 . For the strike-slip Tottori earthquake, the average regional attenuation is Q(f) 180f 0:6 . These attenuation functions are similar to those derived from studies of both California and Japan earthquakes. The regional estimate of E S for the Kyushu earthquake, 3:8 ?? 10 14 J, is significantly smaller than that for the Tottori earthquake, E S 1:3 ?? 10 15 J. These estimates correspond well with the teleseismic estimates of 3:9 ?? 10 14 J and 1:8 ?? 10 15 J, respectively. The apparent stress (T a = ??E s /M 0 with ?? equal to rigidity) for the Kyushu earthquake is 4 times smaller than the apparent stress for the Tottori earthquake. In terms of the fault maturity model, the significantly greater release of energy by the strike-slip Tottori earthquake can be related to strong deformation in an immature intraplate setting. The relatively lower energy release of the thrust-fault Kyushu earthquake can be related to rupture on mature faults at a subduction environment. The consistence between teleseismic and regional estimates of E S is particularly significant as teleseismic data for computing E S are routinely available for all large earthquakes whereas often there are no near-field data.

Bulletin of the Seismological Society of America

A ground motion model for GNSS peak ground displacement

We present an updated ground‐motion model (GMM) for M w "> M w Mw 6–9 earthquakes using Global Navigation Satellite Systems (GNSS) observations of the peak ground displacement (PGD). Earthquake GMMs inform a range of Earth science and engineering applications, including source characterization, seismic hazard evaluations, loss estimates, and seismic design standards. A typical GMM is characterized by simplified metrics describing the earthquake source (magnitude), observation distance, and site terms. Most often, GMMs are derived from broadband seismometer and accelerometer observations, yet during strong shaking, these traditional seismic instruments are affected by baseline offsets, leading to inaccurate recordings of low‐frequency ground motions such as displacement. The incorporation of geodetic data sources, particularly for characterizing the unsaturated ground displacement of large‐magnitude events, has proven valuable as a complement to traditional seismic approaches and led to the development of an initial point‐source GMM based on PGD estimated from high‐rate GNSS data. Here, we improve the existing GMM to more effectively account for fault finiteness, slip heterogeneity, and observation distance. We evaluate the limitations of the currently available GNSS earthquake data set to calibrate the GMM. In particular, the observed earthquake data set is lacking in observations within 100 km of large‐magnitude events ( ⁠ M w &gt; 8 "> M w > 8 Mw>8 ⁠ ), inhibiting evaluation of fault dimensions for earthquakes too large to be represented as point sources in the near field. To that end, we separately consider previously validated synthetic GNSS waveforms within 10–1000 km of M w "> M w Mw 7.8–9.3 Cascadia subduction zone scenario ruptures. The synthetic data highlight the importance of fault distance rather than point‐source metrics and improve our preparedness for large‐magnitude earthquakes with spatiotemporal qualities unlike those in our existing data set.

Bulletin of the Seismological Society of America

Seismic tomography 2023

Seismic tomography is the most abundant source of information about the internal structure of the Earth at scales ranging from a few meters to thousands of kilometers. It constrains the properties of active volcanoes, earthquake fault zones, deep reservoirs and storage sites, glaciers and ice sheets, or the entire globe. It contributes to outstanding societal problems related to natural hazards, resource exploration, underground storage, and many more. The recent advances in seismic tomography are being translated to nondestructive testing, medical ultrasound, and helioseismology. Nearly 50 yr after its first successful applications, this article offers a snapshot of modern seismic tomography. Focused on major challenges and particularly promising research directions, it is intended to guide both Earth science professionals and early‐career scientists. The individual contributions by the coauthors provide diverse perspectives on topics that may at first seem disconnected but are closely tied together by a few coherent threads: multiparameter inversion for properties related to dynamic processes, data quality, and geographic coverage, uncertainty quantification that is useful for geologic interpretation, new formulations of tomographic inverse problems that address concrete geologic questions more directly, and the presentation and quantitative comparison of tomographic models. It remains to be seen which of these problems will be considered solved, solved to some extent, or practically unsolvable over the next decade.

Bulletin of the Seismological Society of America

Six decades of seismology at South Pole, Antarctica: Current limitations and future opportunities to facilitate new geophysical observations

Seismograms from the South Pole have been important for seismological observations for over six decades by providing (until 2007) the only continuous seismic records from the interior of the Antarctic continent. The South Pole, Antarctica station has undergone many updates over the years, including conversion to a digital recording station as part of the Global Seismographic Network (GSN) in 1991 and being relocated to multiple deep ( ⁠ &gt; 250 &#x2009;&#x2009; m "> > 250 m >250 m ⁠ ) boreholes 8 km away from the station in 2003 (and renamed to Quiet South Pole, Antarctica [QSPA]). Notably, QSPA is the second most used GSN station by the National Earthquake Information Center to pick phases used to rapidly detect and locate earthquakes globally, and has been used for a variety of glaciological and oceanography studies. In addition, it is the only seismic station on the Earth where low‐frequency ( ⁠ &lt; 5 &#x2009;&#x2009; mHz "> < 5 mHz <5 mHz ⁠ ), normal‐mode oscillations of the planet excited by large earthquakes can be recorded without influence from Earth’s rotation, and most of the direct effects of the solid Earth tide vanish. However, the current sensors are largely 1980s vintage, and, while able to make some lower‐frequency observations from earthquakes, the borehole sensors appear unable to resolve ambient ground motions at frequencies lower than 25 mHz due to instrument noise and contamination from magnetic field variations. Recently developed borehole sensors offer the potential to extend background noise observations to below 3 mHz, which would substantially improve the fidelity and scientific value of seismic observations at South Pole. Through collaboration with the IceCube Neutrino Observatory, the opportunity exists to emplace a modern very broadband seismometer near the base ( ⁠ &gt; 2 &#x2009;&#x2009; km "> > 2 km >2 km depth) of the Antarctic ice cap, which could lead to unprecedented seismic observations at long periods and facilitate a broad spectrum of Earth science studies.

Seismological Research Letters

The digital archivist: Automating legacy macroseismic data processing using large language models

Macroseismic data are a key resource to investigate shaking and damage from preinstrumental and early instrumental eras. However, data are often stored as inconsistently formatted reports describing observed shaking and damage, making manually parsing and interpreting accounts labor‐intensive. We introduce a novel workflow using Google’s Gemini 2.5 Pro large language model (LLM) to automate the extraction and structuring of macroseismic observations from summary reports. We apply this workflow to the 22 March 1957 M 5.3 Daly City, California, earthquake as a case study. We used Gemini to extract addresses, originally assigned modified Mercalli intensity values, and descriptions from each report. To address coordinate precision limits, addresses were geocoded via Google’s Geocoding application programming interface. This workflow yielded over 2300 geocoded intensity reports for the Daly City earthquake. We use the geocoded accounts, with the original report intensity assignments, to develop a shaking intensity map that in some respects rivals modern Did You Feel It? Maps. We also extract and present data for the 9 February 1971 M L 6.7 Sylmar, California, earthquake. Our results demonstrate the potential of LLMs for reliably extracting and analyzing large, unstructured macroseismic datasets. LLMs offer a scalable solution for rapidly digitizing macroseismic archives, enabling their broader use to constrain ground‐motion models in modern seismic hazard analysis and to improve our understanding of site effects in urban areas. The concepts explored here may also be applied to the handling of other legacy seismological and earth science data.

Seismological Research Letters

Preliminary report on the 16 October 1999 M 7.1 Hector mine, California, earthquake

The M w 7.1 Hector Mine, California, earthquake occurred at 9:46 GMT on 16 October 1999. The event caused minimal damage because it was located in a remote, sparsely populated part of the Mojave Desert, approximately 47 miles east-southeast of Barstow, with epicentral coordinates 34.59°N 116.27°W and a hypocentral depth of 5 ± 3 km. Twelve foreshocks, M 1.9-3.8, preceded the mainshock during the previous twelve hours. All of these events were located close to the hypocenter of the mainshock. The Hector Mine earthquake occurred within the Eastern California Shear Zone (ECSZ). By virtue of its remote location, the societal impact of the Hector Mine earthquake was, fortunately, minimal in spite of the event's appreciable size. The ECSZ is characterized by high seismicity, a high tectonic strain rate, and a broad, distributed zone of north-northwest-trending faults (ECSZ; Figure 1 ; Dokka and Travis, 1990 ; Sauber et al., 1986 ; Sauber et al., 1994 ; Sieh et al., 1993 ). Data regarding the slip rates of faults within the ECSZ suggest that on the order of 15% of the Pacific-North American plate motion occurs along this zone ( Sauber et al., 1986 ; Wesnousky, 1986 ). Most of the faults in the ECSZ have low slip rates and long repeat times for major earthquakes, on the order of several thousands to tens of thousands of years. The occurrence of the Hector Mine earthquake within seven years and only about 30 km east of the 1992 M w 7.3 Landers earthquake suggests that the closely spaced surface faults in the ECSZ are mechanically related. The Hector Mine event involved rupture on two previously mapped fault zones—the Bullion Fault and an unnamed, more northerly-trending fault that is informally referred to in this paper as the Lavic Lake Fault (Dibblee, 1966 , 1967a , b ). Traces of the Bullion Fault exhibit evidence of Holocene displacement and were zoned as active in 1988 under California's Mquist-Priolo Earthquake Fault Zoning Act ( Hart and Bryant, 1997 ). The pattern of rupture along more than one named fault was also observed from the 1992 Landers earthquake ( Hauksson et al., 1993 ; Sieh et al., 1994). Much of the fault zone that produced the Hector Mine earthquake had been buried by relatively young stream deposits, and the fault scarps in bedrock have a subdued morphology. It appears that these faults have not experienced significant offset for perhaps 10,000 years or more ( Hart, 1987 ). Planned future investigations will refine the age of the last event on these faults. The portion of the Lavic Lake Fault that ruptured between the northern end of the Bullion Mountains and Lavic Lake had not previously been mapped. However, our field investigations have identified ancient, subdued fault scarps along portions of the 1999 rupture zone in this area. It thus appears that the entire segment of the Lavic Lake Fault that was involved in the 1999 event had ruptured in the past. As is typical for most faults within the Eastern California Shear Zone, the rate of movement along the Lavic Lake Fault may be quite slow (<1 mm/yr) and should produce earthquakes only infrequently. This event is a reminder that faults that have ruptured in late Quaternary time, but that lack evidence of Holocene displacement, can still produce earthquakes in this low-slip-rate tectonic setting. Additionally, the Hector Mine earthquake is noteworthy for a couple of other reasons. First, it clearly produced triggered seismicity over much of southern California, from the rupture zone toward the south-southwest in particular. Second, as we will discuss, the event may provide new data and insight into recently developed paradigms concerning earthquake interactions and the role of static stress changes. Questions such as these will, of course, be the subject of extensive detailed analyses in years to come. Fortunately, the Hector Mine sequence will provide one of the best data sets obtained to date for a significant earthquake in the United States. Because it occurred when major upgrades to both the regional seismic network (TriNet) and the regional geodetic network (SCIGN) were well underway, the Earth science community will have abundant high-quality data with which to explore the important and interesting questions that have been raised. In this paper, we present and discuss the basic data and preliminary results from the Hector Mine earthquake.

California

New techniques to measure cliff change from historical oblique aerial photographs and structure-from-motion photogrammetry

Oblique aerial photograph surveys are commonly used to document coastal landscapes. Here it is shown that adequate overlap may exist in these photographic records to develop topographic models with Structure-from-Motion (SfM) photogrammetric techniques. Using photographs of Fort Funston, California, from the California Coastal Records Project, imagery were combined with ground control points in a four-dimensional analysis that produced topographic point clouds of the study area’s cliffs for 5 years spanning 2002 to 2010. Uncertainty was assessed by comparing point clouds with airborne LIDAR data, and these uncertainties were related to the number and spatial distribution of ground control points used in the SfM analyses. With six or more ground control points, the root mean squared errors between the SfM and LIDAR data were less than 0.30 m (minimum 1⁄4 0.18 m), and the mean systematic error was less than 0.10 m. The SfM results had several benefits over traditional airborne LIDAR in that they included point coverage on vertical- to-overhanging sections of the cliff and resulted in 10–100 times greater point densities. Time series of the SfM results revealed topographic changes, including landslides, rock falls, and the erosion of landslide talus along the Fort Funston beach. Thus, it was concluded that SfM photogrammetric techniques with historical oblique photographs allow for the extraction of useful quantitative information for mapping coastal topography and measuring coastal change. The new techniques presented here are likely applicable to many photograph collections and problems in the earth sciences.

Journal of Coastal Research

The road to Yucca Mountain—Evolution of nuclear waste disposal in the United States

The generation of electricity by nuclear power and the manufacturing of atomic weapons have created a large amount of spent nuclear fuel and high-level radioactive waste. There is a world-wide consensus that the best way to protect mankind and the environment is to dispose of this waste in a deep geologic repository. Initial efforts focused on salt as the best medium for disposal, but the heat generated by the radioactive waste led many earth scientists to examine other rock types. In 1976, the director of the U.S. Geological Survey (USGS) wrote to the U.S. Energy Research and Development Administration (ERDA), predecessor agency of the U.S. Department of Energy (DOE), suggesting that there were several favorable environments at the Nevada Test Site (NTS), and that the USGS already had extensive background information on the NTS. Later, in a series of communications and one publication, the USGS espoused the favorability of the thick unsaturated zone. After the passage of the Nuclear Waste Policy Act (1982), the DOE compiled a list of nine favorable sites and settled on three to be characterized. In 1987, as the costs of characterizing three sites ballooned, Congress amended the Nuclear Waste Policy Act directing the DOE to focus only on Yucca Mountain in Nevada, with the proviso that if anything unfavorable was discovered, work would stop immediately. The U.S. DOE, the U.S. DOE national laboratories, and the USGS developed more than 100 detailed plans to study various earth-science aspects of Yucca Mountain and the surrounding area, as well as materials studies and engineering projects needed for a mined geologic repository. The work, which cost more than 10 billion dollars and required hundreds of man-years of work, culminated in a license application submitted to the U.S. Nuclear Regulatory Commission (NRC) in 2008.

Environmental & Engineering Geoscience

U.S. Geological Survey yearbook, fiscal year 1993: At work across the Nation

The need for earth science has never been more paramount. The devastating flooding of the Mississippi River this past year, strikingly portrayed on the cover and discussed in detail in this report (p. 37-42), was a sobering reminder of nature's elemental power. As a Nation, we face many environmental and economic challenges, such as natural hazards, that can be addressed effectively only through science. Water quality, resource assessments, climate change, and toxic wastes are all critical issues that can best be dealt with when approached from a sound scientific base. The goal of the U.S. Geological Survey is to provide hydrologic, geologic, and topographic information and understanding that contribute to the wise management of the Nation's natural resources and that promote the health, safety, and well-being of all Americans. FY1993 has proven to be a particularly challenging one for the USGS. We entered into a time of transition from the long-term leadership of Director Dallas Peck and Associate Director Doyle Frederick to the appointment of a new director. We thank Dallas and Doyle for their many years of service and for their support during the transition.

Yearbook

USGS maps

Discover a small sample of the millions of maps produced by the U.S. Geological Survey (USGS) in its mission to map the Nation and survey its resources. This booklet gives a brief overview of the types of maps sold and distributed by the USGS through its Earth Science Information Centers (ESIC) and also available from business partners located in most States. The USGS provides a wide variety of maps, from topographic maps showing the geographic relief and thematic maps displaying the geology and water resources of the United States, to special studies of the moon and planets.

General Information Product

Maps of the United States

The U.S. Geological Survey (USGS) sells a variety of maps of the United States. Who needs these maps? Students, land planners, politicians, teachers, marketing specialists, delivery companies, authors and illustrators, attorneys, railroad enthusiasts, travelers, Government agencies, military recruiters, newspapers, map collectors, truckers, boaters, hikers, sales representatives, communication specialists. Everybody. Users of these maps range from a corporation planning a regional expansion or a national marketing campaign, to a person who wants a decoration to hang on the wall. If you are not sure which map best meets your needs, call the Earth Science Information Center for assistance.

General Information Product

Digital Elevation Models

The Earth Science Information Center (ESIC) distributes digital cartographic/geographic data files produced by the U.S. Geological Survey (USGS) as part of the National Mapping Program. Digital cartographic data files may be grouped into four basic types. The first of these, called a Digital Line Graph (DLG), is the line map information in digital form. These data files include information on base data categories, such as transportation, hypsography, hydrography, and boundaries. The second type, called a Digital Elevation Model (DEM), consists of a sampled array of elevations for a number of ground positions at regularly spaced intervals. The third type is Land Use and Land Cover digital data which provides information on nine major classes of land use such as urban, agricultural, or forest as well as associated map data such as political units and Federal land ownership. The fourth type, the Geographic Names Information System, provides primary information for all known places, features, and areas in the United States identified by a proper name.

Data Users Guide