Search USGS⌕ Search

SEARCH · Search USGS

Results for “Sedimentology”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14Linked to original sources
USGS2019

Lakes as paleoseismic records in a seismically-active, low-relief area (Rieti Basin, central Italy)

Small lakes in low relief areas are atypical candidates for studies on paleoseismicity, but their sediments can contain seismically induced event layers (seismites) generated through strong ground shaking, sediment transport, hydrological reorganization and/or changes in groundwater chemistry and flow. Lakes Lungo and Ripasottile are shallow lakes (<10m deep) located in the tectonically active Rieti Basin in the central Apennines, Italy, where strong normal faulting earthquakes (Mw 6.5 to 7.0) regularly occur. Sediment cores from these lakes provide paleoseismic indicators for the past ~1000 years. Sedimentological and geochemical analysis reveals four event layers identified in both lakes that correspond with documented large-scale earthquakes in 1298, 1349, 1639, and 1703 AD. Chronological correlation between earthquakes and possible seismites is reliable because of the unusually high resolution of sediment dating available for the studied cores. The common physical structure is a physically homogenous bed (homogenite) of re-suspended sediment consisting of a denser, high magnetic susceptibility (MS) clastic base, with organic matter concentrated above. Chemical signatures are associated with some event layers and may represent abrupt or transient shifts to a groundwater-dominated system, or permanent changes in groundwater flow and/or spring discharge. Excursions in δ13Corg may represent disruptions or changes in carbon source. Not all event layers show the same features, a result attributed to differences in seismic processes as well as the lake attributes, and anthropogenic modification. The observations made here may provide a new means of detecting paleoseismicity and may be applied to other low relief lakes in seismically active areas.

Rieti Basin↗
USGS2006

Influence of depositional setting and sedimentary fabric on mechanical layer evolution in carbonate aquifers

Carbonate aquifers in fold-thrust belt settings often have low-matrix porosity and permeability, and thus groundwater flow pathways depend on high porosity and permeability fracture and fault zones. Methods from sedimentology and structural geology are combined to understand the evolution of fracture controlled flow pathways and determine their spatial distribution. Through this process bed-parallel pressure-solution surfaces (PS1) are identified as a fracture type which influences fragmentation in peritidal and basinal carbonate, and upon shearing provides a major flow pathway in fold - thrust belt carbonate aquifers. Through stratigraphic analysis and fracture mapping, depositional setting is determined to play a critical role in PS1 localization and spacing where peritidal strata have closer spaced and less laterally continuous PS1 than basinal strata. In the peritidal platform facies, units with planar lamination have bed-parallel pressure-solution seams along mudstone laminae. In contrast, burrowed units of peritidal strata have solution seams with irregular and anastamosing geometries. Laminated units with closely spaced bed-parallel solution seams are more fragmented than bioturbated units with anastamosing solution seams. In the deeper-water depositional environment, pelagic settling and turbidity currents are the dominant sedimentation processes, resulting in laterally continuous deposits relative to the peritidal platform environment. To quantify the fracture patterns in the basinal environment, mechanical layer thickness values were measured from regions of low to high bed dip. The results define a trend in which mechanical layer thickness decreases as layer dip increases. A conceptual model is presented that emphasizes the link between sedimentary and structural fabric for the peritidal and basinal environments, where solution seams localize in mud-rich intervals, and the resulting pressure-solution surface geometry is influenced by sedimentary geometry (i.e., stacked fining upward cycles, burrows, planar laminations). In both facies types, laterally continuous PS1 can behave as mechanical layer boundaries. As layer-parallel slip increases to accommodate shear strain in the fold - thrust belt, more PS1 behave as mechanical layer boundaries. ?? 2005 Elsevier B.V. All rights reserved.

Sedimentary Geology↗
USGS2007

Underwater microscope for measuring spatial and temporal changes in bed-sediment grain size

For more than a century, studies of sedimentology and sediment transport have measured bed-sediment grain size by collecting samples and transporting them back to the laboratory for grain-size analysis. This process is slow and expensive. Moreover, most sampling systems are not selective enough to sample only the surficial grains that interact with the flow; samples typically include sediment from at least a few centimeters beneath the bed surface. New hardware and software are available for in situ measurement of grain size. The new technology permits rapid measurement of surficial bed sediment. Here we describe several systems we have deployed by boat, by hand, and by tripod in rivers, oceans, and on beaches.

Sedimentary Geology↗
USGS2007

Field test comparison of an autocorrelation technique for determining grain size using a digital 'beachball' camera versus traditional methods

This extensive field test of an autocorrelation technique for determining grain size from digital images was conducted using a digital bed-sediment camera, or 'beachball' camera. Using 205 sediment samples and >1200 images from a variety of beaches on the west coast of the US, grain size ranging from sand to granules was measured from field samples using both the autocorrelation technique developed by Rubin [Rubin, D.M., 2004. A simple autocorrelation algorithm for determining grain size from digital images of sediment. Journal of Sedimentary Research, 74(1): 160-165.] and traditional methods (i.e. settling tube analysis, sieving, and point counts). To test the accuracy of the digital-image grain size algorithm, we compared results with manual point counts of an extensive image data set in the Santa Barbara littoral cell. Grain sizes calculated using the autocorrelation algorithm were highly correlated with the point counts of the same images (r2 = 0.93; n = 79) and had an error of only 1%. Comparisons of calculated grain sizes and grain sizes measured from grab samples demonstrated that the autocorrelation technique works well on high-energy dissipative beaches with well-sorted sediment such as in the Pacific Northwest (r2 ??? 0.92; n = 115). On less dissipative, more poorly sorted beaches such as Ocean Beach in San Francisco, results were not as good (r2 ??? 0.70; n = 67; within 3% accuracy). Because the algorithm works well compared with point counts of the same image, the poorer correlation with grab samples must be a result of actual spatial and vertical variability of sediment in the field; closer agreement between grain size in the images and grain size of grab samples can be achieved by increasing the sampling volume of the images (taking more images, distributed over a volume comparable to that of a grab sample). In all field tests the autocorrelation method was able to predict the mean and median grain size with ???96% accuracy, which is more than adequate for the majority of sedimentological applications, especially considering that the autocorrelation technique is estimated to be at least 100 times faster than traditional methods.

Sedimentary Geology↗
USGS2017

Late Quaternary distal tephra-fall deposits in lacustrine sediments, Kenai Peninsula, Alaska

Tephra-fall deposits from Cook Inlet volcanoes were detected in sediment cores from Tustumena and Paradox Lakes, Kenai Peninsula, Alaska, using magnetic susceptibility and petrography. The ages of tephra layers were estimated using 21 14 C ages on macrofossils. Tephras layers are typically fine, gray ash, 1–5 mm thick, and composed of varying proportions of glass shards, pumice, and glass-coated phenocrysts. Of the two lakes, Paradox Lake contained a higher frequency of tephra (0.8 tephra/100 yr; 109 over the 13,200-yr record). The unusually large number of tephra in this lake relative to others previously studied in the area is attributed to the lake's physiography, sedimentology, and limnology. The frequency of ash fall was not constant through the Holocene. In Paradox Lake, tephra layers are absent between ca. 800–2200, 3800–4800, and 9000–10,300 cal yr BP, despite continuously layered lacustrine sediment. In contrast, between 5000 and 9000 cal yr BP, an average of 1.7 tephra layers are present per 100 yr. The peak period of tephra fall (7000–9000 cal yr BP; 2.6 tephra/100 yr) in Paradox Lake is consistent with the increase in volcanism between 7000 and 9000 yr ago recorded in the Greenland ice cores.

Quaternary Research↗
USGS2017

Marine tephrochronology of the Mt. Edgecumbe volcanic field, southeast Alaska, USA

The Mt. Edgecumbe Volcanic Field (MEVF), located on Kruzof Island near Sitka Sound in southeast Alaska, experienced a large multiple-stage eruption during the last glacial maximum (LGM)-Holocene transition that generated a regionally extensive series of compositionally similar rhyolite tephra horizons and a single well-dated dacite (MEd) tephra. Marine sediment cores collected from adjacent basins to the MEVF contain both tephra-fall and pyroclastic flow deposits that consist primarily of rhyolitic tephra and a minor dacitic tephra unit. The recovered dacite tephra correlates with the MEd tephra, whereas many of the rhyolitic tephras correlate with published MEVF rhyolites. Correlations were based on age constraints and major oxide compositions of glass shards. In addition to LGM-Holocene macroscopic tephra units, four marine cryptotephras were also identified. Three of these units appear to be derived from mid-Holocene MEVF activity, while the youngest cryptotephra corresponds well with the White River Ash eruption at not, vert, similar 1147 cal yr BP. Furthermore, the sedimentology of the Sitka Sound marine core EW0408-40JC and high-resolution SWATH bathymetry both suggest that extensive pyroclastic flow deposits associated with the activity that generated the MEd tephra underlie Sitka Sound, and that any future MEVF activity may pose significant risk to local population centers.

Alaska↗
USGS2003

Middle to late Holocene coastal evolution along the south coast of Upolu Island, Samoa

Stratigraphic surveys and sedimentological analyses of coastal sediments and reef cores along the south coast of Upolu Island, Samoa, reveal that during the middle Holocene this coast was characterised by barrier spits, open lagoons, and estuaries. These estuarine systems matured during the late Holocene, with progressive sedimentation and inlet closure, leading to the dominance of mangrove swamps in the past 1000 years. Contemporaneous with the transition of open estuaries to mangrove swamps was the aggradation and progradation of coastal plains. The coastal progradation since 700-1000 years BP is best explained by increased sediment availability and reduced incident wave energy at the shore resulting from the shallowing and subsequent cessation of reef crest accretion following the mid-Holocene sea-level highstand ca. ???4500 yr BP. A small relative sea-level (RSL) lowering since 700-1000 years may have contributed to the positive sediment budget. This study highlights the need for island-wide coastal surveys to assess the relative roles of RSL, sediment budgets, and hydrodynamics on coastal evolution and stability. Differences in coastal evolution around Upolu Island may also be influenced by differential tectonic movements associated with late Holocene volcanism, coseismicity, and/ or submarine landslides. ?? 2003 Elsevier B.V. All rights reserved.

Marine Geology↗
USGS1999

Interaction of tectonic and depositional processes that control the evolution of the Iberian Gulf of Cadiz margin

This study provides an integrated view of the growth patterns and factors that controlled the evolution of the Gulf of Cadiz continental margin based on studies of the tectonic, sedimentologic and oceanographic history of the area. Seven sedimentary regimes are identified, but there are more extensive descriptions of the late Cenozoic regimes because of the larger data base. The regimes of the Mesozoic passive margin include carbonate platforms, which become mixed calcareous-terrigenous deposits during the Late Cretaceous-early Tertiary. The Oligocene and Early Miocene terrigenous regimes developed, in contrast, over the active and transcurrent margins near the African-Iberian plate boundary. The top of the Gulf of Cadiz olistostrome, emplaced in the Late Miocene, is used as a key horizon to define the 'post-orogenic' depositional regimes. The Late Miocene progradational margin regime is characterized by a large terrigenous sediment supply to the margin and coincides with the closing of the Miocene Atlantic-Mediterranean gateways. The terrigenous drift depositional regime of the Early Pliocene resulted from the occurrence of high eustatic sea level and the characteristics of the Mediterranean outflow currents that developed after the opening of the Strait of Gibraltar. The Late Pliocene and Quaternary regimes are dominated by sequences of deposits related to cycles of high and low sea levels. Deposition of shelf-margin deltas and slope wedges correlate with regressive and low sea level regimes caused by eustasy and subsidence. During the highstand regimes of the Holocene, inner shelf prograding deltas and deep-water sediment drifts were developed under the influence of the Atlantic inflow and Mediterranean outflow currents, respectively. A modern human cultural regime began 2000 years ago with the Roman occupation of Iberia; human cultural effects on sedimentary regimes may have equalled natural factors such as climate change. Interplay of tectonic and oceanographic controls dominated the evolution of the Cadiz margin during the Cenozoic. Depositional sequences formed where the tectonic setting provided the accommodation space and the shape of the deposits has been greatly influenced by the strong unidirectional Atlantic inflow currents on the shelf and Mediterranean outflow currents on the slope. The entire cycle of the inflow and outflow deposition along the margin has been controlled first by the tectonic evolution of the Betic and Rif gateways, which become closed during the Late Miocene, and after the Messinian by the opening of the Strait of Gibraltar. Strong current development during eustatic sea level highstands of the Pliocene and Quaternary has controlled deposition because of maximum sill depths at Gibraltar for water circulation. Lowstand sea levels slowed circulation and resulted in mud drapes over the slope and regressive stratigraphic sequences over the shelf. More recently, the human industrial revolution has caused heavy metal contamination of sediment and water over the Cadiz margin. Human activity also has affected sedimentation rates because of deforestation that caused increased depositional rates near undammed rivers and decreased rates where rivers have been dammed. Future research efforts will need to focus on: (1) the effect of increased Mediterranean outflow caused by river damming plus global warming and the increased outflow as a potential trigger for new ice ages; (2) assessments of geologic hazards for planning man-made shoreline structures, developing offshore petroleum resources and maintaining undersea communications cables; and (3) confirmation of the general geologic history of the Cadiz margin.

Marine Geology↗
USGS2001

A lone biodetrital mound in the Chesterian (Carboniferous) of Alabama?

A carbonate mound in the Chesterian Bangor Limestone of Lawrence County, Alabama, consists chiefly of packstone and grainstone dominated by echinoderm ossicles and fragments of fenestrate bryozoans. In-situ colonies of the rugose coral Caninia flaccida comprise about 8% of the mound by volume. The exposed portion of the mound is approximately 25 m wide, 1.6 m thick at the thickest point and roughly circular in plan. The mound developed on top of a shallow ooid shoal that had been cemented and stabilised during an earlier episode of sub-aerial exposure. Subsequent flooding of the exposed shoal surface permitted establishment of the mound biota. Lateral and vertical facies relationships suggest that the mound possessed about 45 cm of synoptic relief when fully developed. Rugose corals, fenestrate and ramose bryozoans, stalked echinoderms, and sessile soft-bodied organisms encrusted by foraminifera colonised the shoal, forming a mound. Baffling resulted in deposition of mixed-fossil packstone containing locally derived debris and coated grains from the surrounding sea floor. Strong currents within the mound are indicated by preferred orientation of corals and by coarse, commonly cross-stratified grainstone in channels between neighboring coral colonies. Corals are most abundant on the windward side of the mound, where they account for about 13% of the mound compared to 6- 10% in the central part of the mound, and 2-4% on the leeward flank. Biodetrital mounds such as the one described here are uncommon in upper Paleozoic strata and previously unknown in the Bangor Limestone. Of 10 carbonate buildups we examined in the Bangor in Alabama and Tennessee, only one is a biodetrital mound. Two are rugose coral-microbial reefs, one is a coral biostrome, and six are dominated by microbialite. The Bangor shelf, previously interpreted as sedimentologically simple, appears to contain many small mounds of quite varied characteristics. Also, the discovery of a biodetrital mound in the Chesterian of Alabama suggests that there may be more kinds of upper Paleozoic mounds than commonly acknowledged. ?? 2001 Elsevier Science B.V. All rights reserved.

Sedimentary Geology↗
USGS1998

Pebble orientation on large, experimental debris-flow deposits

Replicable, pronounced orientation of discoid pebbles (≥8 mm) embedded on surfaces of large (∼10 m 3 ) experimental debris-flow deposits reveals that strongly aligned, imbricate fabric can develop rapidly over short distances in mass flows. Pebble long axes aligned subparallel to deposit margins as well as subparallel to margins of surge waves arrested within the deposits. Pebble alignment exhibited modes both parallel to ( a(p) ), the primary flow direction; intermediate axes dipped preferentially inward from surge-wave margins ( b(i) orientation). Repetitive development of margin-parallel, imbricate fabric distributed across deposit surfaces provides compelling evidence that deposits formed dominantly through progressive incremental accretion rather than through simple en masse emplacement. Pronounced fabric along deposit and arrested surge-wave margins reflects significant grain interaction along flow margins. This sedimentological evidence for significant marginal grain interaction complements theoretical analyses (Iverson, 1997) and other experimental data (Major, 1996; Iverson, 1997) that indicate that resistance along flow margins is an important factor affecting debris-flow deposition. The fabric on the experimental deposits demonstrates that debris flows can develop strongly imbricate particle orientation that mimics fabric developed during fluvial deposition. Particle shape and local stress fields appear to have more control over fabric development than does general depositional process. Other criteria in addition to particle orientation are needed to discriminate mass flow from fluvial gravel deposits and to unravel depositional history.

Sedimentary Geology↗
USGS2003

Aggradation of gravels in tidally influenced fluvial systems: Upper Albian (Lower Cretaceous) on the cratonic margin of the North American Western Interior foreland basin

Alluvial conglomerates were widely distributed around the margin of the Early Cretaceous North American Cretaceous Western Interior Seaway (KWIS). Conglomerates, sandstones, and lesser amounts of mudstones of the upper Albian Nishnabotna Member of the Dakota Formation were deposited as fill-in valleys that were incised up to 80 m into upper Paleozoic strata. These paleovalleys extended southwestward across present-day northwestern Iowa into eastern Nebraska. Conglomerate samples from four localities in western Iowa and eastern Nebraska consist mostly of polycrystalline quartz with lesser amounts of microcrystalline (mostly chert), and monocrystalline quartz. Previous studies discovered that some chert pebbles contain Ordovician-Pennsylvanian invertebrate fossils. The chert clasts analyzed in this study were consistent with these findings. In addition, we found that non-chert clasts consist of metaquartzite, strained monocrystalline quartz and 'vein' quartz from probable Proterozic sources, indicating that parts of the fluvial system's sediment load must have travelled distances of 400-1200 km. The relative tectonic stability of this subcontinent dictated that stream gradients were relatively low with estimates ranging from 0.3 to 0.6 m/km. Considering the complex sedimentologic relationships that must have been involved, the ability of low-gradient easterly-sourced rivers to entrain gravel clasts was primarily a function of paleodischarge rather than a function of steep gradients. Oxygen isotopic evidence from Albian sphaerosiderite-bearing paleosols in the Dakota Formation and correlative units from Kansas to Alaska suggest that mid-latitude continental rainfall in the Albian was perhaps twice that of the modern climate system. Hydrologic fluxes may have been related to wet-dry climatic cycles on decade or longer scales that could account for the required water supply flux. Regardless of temporal scale, gravels were transported during 'high-energy' pulses, under humid climatic conditions in large catchment areas. An overall rising sea level during the late Albian created accommodation space for the gravelly lithofacies equivalent to the Kiowa-Skull Creek rocks. As Western Interior sea level rose, regional stream gradients were reduced, resulting in regional fluvial aggradation. The conglomeratic lower parts of the Nishnabotna Member of the Dakota Formation formed the transgressive systems tract within an upper Albian sequence that is defined by two unconformities that can be traced from marine Kiowa strata in western Kansas northeastward into western Iowa (Brenner et al., 2000). Mud-draped cross-bedded sandstone bodies, laminated mudstone intervals, and vertical burrows in the lower strata of the Nishnabotna Member indicate that estuarine conditions existed at the mouths of the river system, and tidal effects were transmitted at least 200 km inland from the interpreted late Albian coast. These observations suggest that estuarine conditions stepped up the incised valleys as fluvial sediments aggraded in response to regional transgression that continued through the Late Albian. ?? 2003 Elsevier Ltd. All rights reserved.

Cretaceous Research↗
USGS1990

Monitoring long-term effects of offshore oil and gas development along the Southern California outer continental shelf and slope: Background environmental conditions in the Santa Maria Basin

Potential environmental impacts of materials discharged from oil and gas development and production platforms off the coast of southern California (Santa Maria Basin) are being monitored during an ongoing, long-term (fiveyear) field program. The study combines hypothesis testing of platform effects with basic research on the structure and dynamics of the regional ecosystem over a time series encompassing both seasonal and repeated annual scales. Oceanographic features and processes that are being measured focus on the benthos and include biological community indices and species abundances for hard-bottom and soft-bottom (macroinfauna and meiofauna) assemblages; levels and distributions of trace metals and hydrocarbons in bottom sediments, suspended particulates, animal tissues, and pore waters; water currents and otherphysical-oceanographicfeatures; various sedimentological properties (sediment grain size, total organic carbon, shear strength, distribution of mineral types, radioisotope profiles, and degrees of sediment mixing as a result of bioturbation); sediment and pollutant-transport processes; and animal-sediment-pollutant interactions. Synoptic measurement of these different environmental variables over the extended sampling period provides an opportunity to examine long-term variability in the benthic environment with respect to both natural and anthropogenic causes. Efforts to distinguish between natural variability and low-level cumulative impacts of drilling are given special attention. Results obtained during the first two years of sampling provide a basis for beginning to understand environmental processes and relations important in detecting and interpreting any subsequent impacts caused by drilling activities in this complex and productive region of the California outer continental shelf and slope. Background chemical, physical, and biological data generated during this period demonstrate that impacts of discharges from oil and gas operations should be detectable, if they occur, and should be distinguishable from natural environmental variability. Small inputs of barium and petroleum hydrocarbons have been detected and appear to be associated with the minor drilling activities that have occurred in the area thus far, however, these initial inputs have not led to any noticeable biological impacts. These initial results are hopefully of value for two reasons: (1) in providing a summary of basic chemical, physical, and biological features of the benthic environment within the Santa Maria Basin; and (2) in presenting information on research strategies that should be considered in designing studies dealing with similar resource-management problems in other parts of the world.

California↗
USGS2002

Holocene multidecadal and multicentennial droughts affecting Northern California and Nevada

Continuous, high-resolution δ 18 O records from cored sediments of Pyramid Lake, Nevada, indicate that oscillations in the hydrologic balance occurred, on average, about every 150 years (yr) during the past 7630 calendar years (cal yr). The records are not stationary; during the past 2740 yr, drought durations ranged from 20 to 100 yr and intervals between droughts ranged from 80 to 230 yr. Comparison of tree-ring-based reconstructions of climate change for the past 1200 yr from the Sierra Nevada and the El Malpais region of northwest New Mexico indicates that severe droughts associated with Anasazi withdrawal from Chaco Canyon at 820 cal yr BP (calendar years before present) and final abandonment of Chaco Canyon, Mesa Verde, and the Kayenta area at 650 cal yr BP may have impacted much of the western United States.During the middle Holocene (informally defined in this paper as extending from 8000 to 3000 cal yr BP), magnetic susceptibility values of sediments deposited in Pyramid Lake's deep basin were much larger than late–Holocene (3000–0 cal yr BP) values, indicating the presence of a shallow lake. In addition, the mean δ 18 O value of CaCO 3 precipitated between 6500 and 3430 cal yr BP was 1.6‰ less than the mean value of CaCO 3 precipitated after 2740 cal yr BP. Numerical calculations indicate that the shift in the δ 18 O baseline probably resulted from a transition to a wetter (>30%) and cooler (3–5°C) climate. The existence of a relatively dry and warm middle-Holocene climate in the Truckee River–Pyramid Lake system is generally consistent with archeological, sedimentological, chemical, physical, and biological records from various sites within the Great Basin of the western United States. Two high-resolution Holocene-climate records are now available from the Pyramid and Owens lake basins which suggest that the Holocene was characterized by five climatic intervals. TIC and δ 18 O records from Owens Lake indicate that the first interval in the early Holocene (11,600–10,000 cal yr BP) was characterized by a drying trend that was interrupted by a brief (200 yr) wet oscillation centered at 10,300 cal yr BP. This was followed by a second early-Holocene interval (10,000–8000 cal yr BP) during which relatively wet conditions prevailed. During the early part of the middle Holocene (8000–6500 cal yr BP), high-amplitude oscillations in TIC in Owens Lake and δ 18 O in Pyramid Lake indicate the presence of shallow lakes in both basins. During the latter part of the middle Holocene (6500–3800 cal yr BP), drought conditions dominated, Owens Lake desiccated, and Lake Tahoe ceased spilling to the Truckee River, causing Pyramid Lake to decline. At the beginning of the late Holocene (∼3000 cal yr BP), Lake Tahoe rose to its sill level and Pyramid Lake increased in volume.

Quaternary Science Reviews↗
USGS1994

Lake-level history of Lake Michigan for the past 12,000 years: the record from deep lacustrine sediments

Collection and analysis of an extensive set of seismic-reflection profiles and cores from southern Lake Michigan have provided new data that document the history of the lake basin for the past 12,000 years. Analyses of the seismic data, together with radiocarbon dating, magnetic, sedimentologic, isotopic, and paleontologic studies of core samples, have allowed us to reconstruct lake-level changes during this recent part of the lake's history. The post-glacial history of lake-level changes in the Lake Michigan basin begins about 11.2 ka with the fall from the high Calumet level, caused by the retreat of the Two Rivers glacier, which had blocked the northern outlet of the lake. This lake-level fall was temporarily reversed by a major influx of water from glacial Lake Agassiz (about 10.6 ka), during which deposition of the distinctive gray Wilmette Bed of the Lake Michigan Formation interrupted deposition of red glaciolacustrine sediment. Lake level then continued to fall, culminating in the opening of the North Bay outlet at about 10.3 ka. During the resulting Chippewa low phase, lake level was about 80 m lower than it is today in the southern basin of Lake Michigan. The rise of the early Holocene lake level, controlled primarily by isostatic rebound of the North Bay outlet, resulted in a prominent, planar, transgressive unconformity that eroded most of the shoreline features below present lake level. Superimposed on this overall rise in lake level, a second influx of water from Lake Agassiz temporarily raised lake levels an unknown amount about 9.1 ka. At about 7 ka, lake level may have fallen below the level of the outlet because of sharply drier climate. Sometime between 6 and 5 ka, the character of the lake changed dramatically, probably due mostly to climatic causes, becoming highly undersaturated with respect to calcium carbonate and returning primary control of lake level to the isostatically rising North Bay outlet. Post-Nipissing (about 5 ka) lake level has fallen about 6 m due to erosion of the Port Huron outlet, a trend around which occurred relatively small (± ∼2 m), short-term fluctuations controlled mainly by climatic changes. These cyclic fluctuations are reflected in the sed-imentological and sediment-magnetic properties of the sediments.

Indiana, Illinois, Michigan, Wisconsin↗
USGS2002

Lake evolution of the terminal area of Shiyang River drainage in arid China since the last glaciation

Investigations of geomorphology and sedimentology, and analyses of radiocarbon dates, grain size and carbonate of the sediment at the present-dry closed basin in the terminal area of Shiyang River in arid China were conducted to recover the history of palaeolake change since the last glacial. The terminal area was covered by eolian sand before 13,000 14C BP. Lacustrine deposits covered the eolian sand after 13,000 14C BP, but were succeeded rapidly by eolian or fluvial deposits ca. 11,200-10,000 BP. This fact plus the grain-size distribution and CaCO3 content showed that climate was extremely dry during the last glacial, but wet-dry oscillations characterized the late glacial. A single coalescent lake, over 45 m deep and 2130 km2, formed between 10,000-6400 14C BP in the basin. The lake disintegrated into several shallow carbonate lakes or swamps gradually after 6400 14C BP. Eolian sand reached into the most part of the basin during the period. The lake evolution in the area generally reflects the East Asian summer monsoon history forced by Northern hemisphere insolation. Short time-scale lake fluctuations also existed in the area since the last glacial. ?? 2002 Elsevier Science Ltd and INQUA. All rights reserved.

Quaternary International↗
USGS2026

Permeability and compressibility of “seal” sediment overlying the B1 sand gas hydrate reservoir: Hydrate 02 Geo Data Well, Prudhoe Bay unit, Alaska North Slope

An important element in evaluating the viability of extracting methane from a gas hydrate-bearing reservoir is establishing the effectiveness of the overlying bounding sediment as a seal to prevent gas loss, to enable effective depressurization, and to prevent fluid from entering the reservoir during production. This laboratory study presents results for index properties (e.g., grain density, grain size, and liquid limit), compressibility and swelling indices, and permeability measurements on sediment overlying the gas hydrate-bearing reservoir that was the target of the recent JOGMEC-DOE-USGS collaborative gas hydrate production testing project on the Alaska North Slope (ANS). Sediment analyzed in this study was collected during pressure coring operations in the HYDRATE 02 Geo Data Well (GDW). The ∼6.1 m sediment interval recovered in Cores 13P and 14P (878.74–884.88 m measured depth, MD) exhibited heterogeneous sedimentologic characteristics at the centimeter scale, with sediments ranging from clay to thin silty-sand lithologies. Permeability measurements and index-property correlations indicate the interval’s overall in situ vertical permeability ranges from 0.2 to 3.6 microdarcy (μD). Results for compressibility ( C C = 0.255 ± 0.02) and swelling index ( C S = 0.04 ± 0.01) are consistent with estimates based on mineralogy and liquid limit correlations. Based on the measured compressibility, the ∼3 MPa increase in effective stress during the stable phase of depressurization-induced production is anticipated to have imposed 2.43 cm of compaction per meter in the reservoir overburden, reducing permeability by ∼36%. The overburden sediment’s low in situ permeability (3 to 4 orders of magnitude below permeabilities measured in the gas hydrate-bearing part of the B1 sand (unit B)) suggests the B1 sand′s overburden provides an effective seal. Such a seal promotes efficient production by limiting fluid flow into the reservoir during depressurization-induced gas hydrate dissociation.

Alaska↗
USGS1998

Stable isotopes and sediments from Pickerel Lake, South Dakota, USA: A 12ky record of environmental changes

Sedimentological parameters and stable O- and C-isotopic composition of marl and ostracode calcite selected from a 17.7-m-long core from the 8-m-deep center of Pickerel Lake, northeastern South Dakota, provide one of the longest (ca. 12ky) paleoenvironmental records from the northern Great Plains. The late Glacial to early Holocene climate in the northern Great Plains was characterized by changes from cold and wet to cold and dry, and back to cold and wet conditions. These climatic changes were controlled by fluctuations in the positions of the Laurentide ice sheet and the extent of glacial Lake Agassiz. We speculate that the cold and dry phase may correspond to the Younger Dryas event. A salinity maximum was reached between 10.3 and 9.5 ka, after which Pickerel Lake shifted from a system controlled by atmospheric changes to a system controlled by groundwater seepage that might have been initiated by the final withdrawal of Glacial Lake Agassiz. A prairie lake was established at approximately 8.7 ka, and lasted until about 2.2 ka. During this mid-Holocene prairie period, drier conditions than today prevailed, interrupted by periods of increased moisture at about 8, 4, and 2.2 ka. Prairie conditions were more likely dry and cool rather than dry and warm. The last 2.2 ka are characterized by higher climatic variability with 400-yr aridity cycles including the Medieval Warm Period and the Little Ice Age. Although the signal of changing atmospheric circulation is overprinted by fluctuations in the positions of the ice sheet and glacial Lake Agassiz during the late Glacial-Holocene transition, a combination of strong zonal circulation and strong monsoons induced by the presence of the ice sheet and high insolation may have provided mechanisms for increased precipitation. Zonal flow introducing dry Pacific air became more important during the prairie period but seems to have been interrupted by short periods of stronger meridional circulation with intrusions of moist air from the Gulf of Mexico. More frequent switching between periods of zonal and meridional circulation seem to be responsible for increased climatic variability during the last 2.2 ka.

Journal of Paleolimnology↗
USGS2000

Colorado River sediment transport: 1. Natural sediment supply limitation and the influence of Glen Canyon Dam

Analyses of flow, sediment‐transport, bed‐topographic, and sedimentologic data suggest that before the closure of Glen Canyon Dam in 1963, the Colorado River in Marble and Grand Canyons was annually supply‐limited with respect to fine sediment (i.e., sand and finer material). Furthermore, these analyses suggest that the predam river in Glen Canyon was not supply‐limited to the same degree and that the degree of annual supply limitation increased near the head of Marble Canyon. The predam Colorado River in Grand Canyon displays evidence of four effects of supply limitation: (1) seasonal hysteresis in sediment concentration, (2) seasonal hysteresis in sediment grain size coupled to the seasonal hysteresis in sediment concentration, (3) production of inversely graded flood deposits, and (4∥ development or modification of a lag between the time of a flood peak and the time of either maximum or minimum (depending on reach geometry) bed elevation. Analyses of sediment budgets provide additional support for the interpretation that the predam river was annually supply‐limited with respect to fine sediment, but it was not supply‐limited with respect to fine sediment during all seasons. In the average predam year, sand would accumulate and be stored in Marble Canyon and upper Grand Canyon for 9 months of the year (from July through March) when flows were dominantly below 200–300 m 3 /s; this stored sand was then eroded during April through June when flows were typically higher. After closure of Glen Canyon Dam, because of the large magnitudes of the uncertainties in the sediment budget, no season of substantial sand accumulation is evident. Because most flows in the postdam river exceed 200–300 m 3 /s, substantial sand accumulation in the postdam river is unlikely.

Colorado River, Glen Canyon Dam↗