SEARCH · Search USGS

Results for “River Basin Bulletin”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14Linked to original sources

USGS2012

Source rock contributions to the Lower Cretaceous heavy oil accumulations in Alberta: a basin modeling study

The origin of the immense oil sand deposits in Lower Cretaceous reservoirs of the Western Canada sedimentary basin is still a matter of debate, specifically with respect to the original in-place volumes and contributing source rocks. In this study, the contributions from the main source rocks were addressed using a three-dimensional petroleum system model calibrated to well data. A sensitivity analysis of source rock definition was performed in the case of the two main contributors, which are the Lower Jurassic Gordondale Member of the Fernie Group and the Upper Devonian–Lower Mississippian Exshaw Formation. This sensitivity analysis included variations of assigned total organic carbon and hydrogen index for both source intervals, and in the case of the Exshaw Formation, variations of thickness in areas beneath the Rocky Mountains were also considered. All of the modeled source rocks reached the early or main oil generation stages by 60 Ma, before the onset of the Laramide orogeny. Reconstructed oil accumulations were initially modest because of limited trapping efficiency. This was improved by defining lateral stratigraphic seals within the carrier system. An additional sealing effect by biodegraded oil may have hindered the migration of petroleum in the northern areas, but not to the east of Athabasca. In the latter case, the main trapping controls are dominantly stratigraphic and structural. Our model, based on available data, identifies the Gordondale source rock as the contributor of more than 54% of the oil in the Athabasca and Peace River accumulations, followed by minor amounts from Exshaw (15%) and other Devonian to Lower Jurassic source rocks. The proposed strong contribution of petroleum from the Exshaw Formation source rock to the Athabasca oil sands is only reproduced by assuming 25 m (82 ft) of mature Exshaw in the kitchen areas, with original total organic carbon of 9% or more.

Alberta↗

USGS1995

Stratigraphic and structural synthesis of a Miocene extensional terrane, southeast California and west-central Arizona

Detailed stratigraphy and isotopic dating of stratigraphic sections in the Colorado River extensional corridor support a regional correlation of highly faulted Tertiary stratigraphic sequences and provide a chronologic framework for interpreting the evolution of low-angle normal (detachment) faults. On the basis of this correlation, we define six tilting domains in the upper plate of the Whipple, Chemehuevi, and Rawhide detachment faults and identify three discrete episodes of detachment faulting that began in the early Miocene and ended in middle Miocene time. Episodes of rapid detachment faulting are indicated by extreme tilting of upper-plate fault blocks and overlying Miocene sequences, fanning dips of basinal deposits, and angular unconformities that represent short time gaps in the accumulation of syntectonic sequences. During the first episode of detachment faulting at about 20 Ma, the upper plate segmented to form the domains. Basin subsidence and extreme tilting of upper-plate fault blocks and syntectonic deposits characterized the eastern Topock, Crossman, Aubrey, Parker Dam, and Buckskin-Rawhide domains, whereas the western Mopah domain was the site of abundant volcanic activity but no basins or tilting. A second episode of extension at about 18 Ma produced extreme tilts in the Buckskin-Rawhide domain but upper-plate blocks in the Mopah domain tilted moderately. A third regionwide faulting episode between 14 and 12 Ma was due to localized uplift of middle and lower crust and eventual exposure of the detachment faults and their footwalls. The upper-plate fault blocks responded passively to localized slip on the detachment faults. Rapid extension began on the Whipple-Chemehuevi detachment fault at 20 Ma and had shifted southward to the Buckskin-Rawhide detachment fault by 18 Ma; volcanic activity also shifted southward to the Buckskin-Rawhide domain at this time. The southward shift of rapid extension and volcanism probably represents buildup and release of strain at localized sites in the lower plate. Otherwise, stratigraphic and structural relations indicate that the locations of upper-plate basins, faulting and tilting of upper-plate blocks, and position of the breakaway zone remained stable throughout the major phases of extension.

Arizona, California↗

USGS1983

Paleohydraulic reconstruction of flash- flood peaks from boulder deposits in the Colorado Front Range

Nine watersheds in the Colorado Front Range with steep bedrock channels were used to test the accuracy of paleohydraulic reconstruction of large flash floods using boulder deposits. The nine basins consist of eight small ungauged basins ranging in size from 1.6 to 29 km 2 and the Big Thompson River at the mouth of the Big Thompson Canyon, draining 790 km 2 . Between 1923 and 1976, all nine basins had had one catastrophic flash flood, the magnitude of which has been estimated by the conventional slope-area method. In each basin, coarse boulder deposits of the large flash floods were identified, and three axes of the five largest boulders were measured, along with at least two profiles of the valley cross section. A simple arithmetic average of two theoretical and two empirical relationships was used to estimate average flood velocity using boulder size and shape. Average depth was estimated as the arithmetic average of four values computed from the Manning equation, a regression equation for boulder size and unit stream power, a relative smoothness equation, and a modified Shields' relationship. The appropriate flood width for the estimated average depth was found by iteration, using the valley cross sections. The paleohydraulic discharges thus computed generally underestimate conventional slope-area discharge estimates on small streams by as much as 75%, although the average amount is only 28% too low, and the reconstructed discharge in one stream was 31% too large. The Big Thompson River flood of 1976 was overestimated by 76%. Reasons for discrepancy in reconstructed peaks could include (1) the possibility that floods may have been able to move boulders larger than those available to be moved; (2) overestimation of the slope-area discharge because high-water marks were set prior to erosion of the channel; (3) underestimation of original roughness coefficients; and (4) macroturbulent effects during fast, deep flows. The paleohydraulic technique is applied to two other streams in Colorado with sedimentological evidence of large flash floods, but no conventional indirect discharge estimates. A small tributary to the Big Thompson River draining 1.8 km 2 has a paleohydraulic reconstructed flood peak of about 60 m 3 /s from a flood in 1976. Using boulders excavated from a foundation site in Holocene alluvium along Boulder Creek in Boulder, Colorado, a paleohydraulic reconstructed flood peak of between 860 and 1,512 m 3 /s is calculated. This is 1.4 to 2.4 times the magnitude of the estimated 500-yr flood.

Geological Society of America Bulletin↗

USGS1996

Burial and thermal history of the Paradox Basin, Utah and Colorado, and petroleum potential of the Middle Pennsylvanian Paradox Formation

The Ismay-Desert Creek interval and Cane Creek cycle of the Alkali Gulch interval of the Middle Pennsylvanian Paradox Formation in the Paradox Basin of Utah and Colorado contain excellent organic-rich source rocks having total organic carbon contents ranging from 0.5 to 11.0 percent. The source rocks in both intervals contain types I, II, and III organic matter and are potential source rocks for both oil and gas. Organic matter in the Ismay-Desert Creek interval and Cane Creek cycle of the Alkali Gulch interval (hereinafter referred to in this report as the "Cane Creek cycle") probably is more terrestrial in origin in the eastern part of the basin and is interpreted to have contributed to some of the gas produced there. Thermal maturity increases from southwest to northeast for both the Ismay-Desert Creek interval and Cane Creek cycle, following structural and burial trends throughout the basin. In the northernmost part of the basin, the combination of a relatively thick Tertiary sedimentary sequence and high basinal heat flow has produced very high thermal maturities. Although general thermal maturity trends are similar for both the Ismay-Desert Creek interval and Cane Creek cycle, actual maturity levels are higher for the Cane Creek due to the additional thickness (as much as several thousand feet) of Middle Pennsylvanian section. Throughout most of the basin, the Ismay-Desert Creek interval is mature and in the petroleum-generation window (0.10 to 0.50 production index (PI)), and both oil and gas are produced; in the south-central to southwestern part of the basin, however, the interval is marginally mature (<0.10 PI) for petroleum generation, and mainly oil is produced. In contrast, the more mature Cane Creek cycle contains no marginally immature areas—it is mature (>0.10 PI) in the central part of the basin and is overmature (past the petroleum-generation window (>0.50 PI)) throughout most of the eastern part of the basin. The Cane Creek cycle generally produces oil and associated gas throughout the western and central parts of the basin and thermogenic gas in the eastern part of the basin. Burial and thermal-history models were constructed for six different areas of the Paradox Basin. In the Monument upwarp area, the least mature part of the basin, the Ismay-Desert Creek interval and Cane Creek cycle have thermal maturities of 0.10 and 0.20 PI and were buried to 13,400 ft and 14,300 ft, respectively. A constant heat flow through time of 40 mWm -2 (milliwatts per square meter) is postulated for this area. Significant petroleum generation began at 45 Ma for the Ismay-Desert Creek interval and at 69 Ma for the Cane Creek cycle. In the area around the confluence of the Green and Colorado Rivers, the Ismay-Desert Creek interval and Cane Creek cycle have thermal maturities of 0.20 and 0.25 PI and were buried to 13,000 ft and 14,200 ft, respectively. A constant heat flow through time of 42 mWm -2 is postulated for this area. Significant petroleum generation began at 60 Ma for the Ismay-Desert Creek interval and at 75 Ma for the Cane Creek cycle. In the area around the town of Green River, Utah, the Ismay-Desert Creek interval and Cane Creek cycle have thermal maturities of 0.60 and greater and were buried to 14,000 ft and 15,400 ft, respectively. A constant heat flow through time of 53 mWm -2 is proposed for this area. Significant petroleum generation began at 82 Ma for the Ismay-Desert Creek interval and at 85 Ma for the Cane Creek cycle. Around Moab, Utah, in the deeper, eastern part of the basin, the Ismay-Desert Creek interval and Cane Creek cycle have thermal maturities of 0.30 and around 0.35 PI and were buried to 18,250 ft and 22,000 ft, respectively. A constant heat flow through time of 40 mWm -2 is postulated for this area. Significant petroleum generation began at 79 Ma for the Ismay-Desert Creek interval and at 90 Ma for the Cane Creek cycle. At Lisbon Valley, also in the structurally deeper part of the basin, the Ismayy–Desert Creek interval and Cane Creek cycle have thermal maturities of 0.30 and greater than 0.60 PI and were buried to 15,750 ft and 21,500 ft, respectively. A constant heat flow through time of 44 mWm –2 is postulated for this area. Significant petroleum generation began at 79 Ma for the Ismay–Desert Creek interval and at 100 Ma for the Cane Creek cycle. The area around Hermosa, Colo., in the southeastern part of the basin, has experienced a shallower burial history than the other areas in the basin, yet it has one of the highest thermal maturities. Here, the Ismay–Desert Creek interval and Cane Creek cycle have vitrinite reflectance values of 1.58 and 1.63 percent and were buried to 13,700 ft and 15,500 ft, respectively. Due to Tertiary igneous activity in this part of the basin, a variable heat flow is proposed: from 600 to 30 Ma, 45 mWm –2 ; from 30 to 25 Ma, 63 mWm –2 ; and from 25 Ma to present, 50 mWm –2 . Significant petroleum generation began at 72 Ma for the Ismay–Desert Creek interval and at 76 Ma for the Cane Creek cycle.

Colorado, Utah↗

USGS2020

Coarse sediment dynamics in a large glaciated river system: Holocene history and storage dynamics dictate contemporary climate sensitivity

The gravel-bedded White River drains a 1279 km 2 basin in Washington State, with lowlands sculpted by continental glaciation and headwaters on an actively glaciated stratovolcano. Chronic aggradation along an alluvial fan near the river’s mouth has progressively reduced flood conveyance. In order to better understand how forecasted climate change may influence coarse sediment delivery and aggradation rates in this lowland depositional setting, we assessed the contemporary delivery and routing of coarse sediment through the watershed; this assessment was based on a rich set of topographic, sedimentologic, and hydrologic data from the past century, with a focus on repeat high-resolution topographic surveys from the past decade. We found that most of the lower river’s contemporary bed-load flux originates from persistent erosion of alluvial deposits in the lower watershed. This erosion is a response to a drop in local base level caused by a major avulsion across the fan in 1906 and then augmented by subsequent dredging. The 1906 avulsion and modern disequilibrium valley profiles reflect landscape conditioning by continental glaciation and a massive mid-Holocene lahar. In the proglacial headwaters, infrequent large sediment pulses have accomplished most of the observed coarse sediment export, with exported material blanketing downstream valley floors; during typical floods, transported bed material is largely sourced from erosion of these valley floor deposits. Throughout the watershed, we observe decadal-scale coarse sediment dynamics strongly related to the filling or emptying of valley-scale sediment storage over 10 2 −10 4 yr time scales, often in response to major disturbances that either emplace large deposits or influence their redistribution. Paraglacial responses in large watersheds are suggested to be inherently complicated and punctuated as a result of internal landform interactions and stochastic/threshold-dependent events. We argue, in combination, that Holocene disturbance, storage dynamics, and human flow modification make coarse sediment fluxes in the lower White River relatively insensitive to decadal climate variability. Results highlight the degree to which river sensitivity to contemporary disturbance, climatic or otherwise, may be contingent on local and idiosyncratic watershed histories, underscoring the need to unpack those histories while demonstrating the utility of watershed-scale high-resolution topography toward that end.

Washington↗

USGS1955

Pleistocene geology of the southwestern Wind River Mountains, Wyoming

Patches of Buffalo till record the earliest glaciation in the southwestern Wind River Mountains. In places, these rest in youthful valleys cut in high gravel terrace. Two other younger and lower terraces are both topographically and stratigraphically associated with Buffalo till, which may indicate that the Buffalo advance was compound. The pattern of well-preserved moraines shows that during both Bull Lake and Pine-dale time the west-central portion of the range was covered by a mountain icecap from which piedmont glaciers flowed to the floor of the Bridger Basin. In the southern part of the range the glaciers were confined to valleys. Bull Lake stage is clearly double; two large, weathered, and modified moraines are present in several valleys. Each is associated with an extensive outwash plain and valley train. The Pinedale stage is recorded by massive, fresh, slightly modified moraines behind which are many recessional moraines. Extensive outwash aprons lead outward from the massive Pinedale moraines, and a small lower terrace can be traced through the main Pinedale moraine to the recessional loops. In several upper valleys well-formed slightly weathered small moraines of the Temple Lake stage occur within 2 miles of cirque head-walls. A terrace below the younger Pinedale outwash is correlated with the Temple Lake stage. In sheltered cirques, small very fresh moraines, probably from the Little Ice Age, occur upstream from the Temple Lake moraines and a few yards from existing small glaciers. The sequence of glacial deposits in this region is typical of many ranges in the Rocky Mountain region. Outwash terraces of the Bull Lake, Pinedale, and Temple stages have been traced down the Big Sandy valley nearly to the Green River and down the Sweetwater valley to the North Platte. Thus the Green-Colorado and Platte-Missouri drainages are linked across the Continental Divide by means of traceable outwash deposits. Eolian action was pronounced in the Eden valley during Bull Lake, Pinedale, and post-Pinedale time, and in the East Fork valley during Pinedale time. Frost action features record two phases of intensity in areas formerly covered by Pinedale glaciers: an earlier phase synchronous with the Temple Lake advance, a later during the Little Ice Age. Pollen profiles in the Eden valley show a climatic change during post-Pinedale time, notably a grass maximum which was probably contemporaneous with the Temple Lake advance and the occupation of the Finley site by Early Man.

Wyoming↗

USGS1998

The enormous Chillos Valley Lahar: An ash-flow-generated debris flow from Cotopaxi Volcano, Ecuador

The Chillos Valley Lahar (CVL), the largest Holocene debris flow in area and volume as yet recognized in the northern Andes, formed on Cotopaxi volcano's north and northeast slopes and descended river systems that took it 326 km north–northwest to the Pacific Ocean and 130+ km east into the Amazon basin. In the Chillos Valley, 40 km downstream from the volcano, depths of 80–160 m and valley cross sections up to 337 000 m 2 are observed, implying peak flow discharges of 2.6–6.0 million m 3 /s. The overall volume of the CVL is estimated to be ≈3.8 km 3 . The CVL was generated approximately 4500 years BP by a rhyolitic ash flow that followed a small sector collapse on the north and northeast sides of Cotopaxi, which melted part of the volcano's icecap and transformed rapidly into the debris flow. The ash flow and resulting CVL have identical components, except for foreign fragments picked up along the flow path. Juvenile materials, including vitric ash, crystals, and pumice, comprise 80–90% of the lahar's deposit, whereas rhyolitic, dacitic, and andesitic lithics make up the remainder. The sand-size fraction and the 2- to 10-mm fraction together dominate the deposit, constituting ≈63 and ≈15 wt.% of the matrix, respectively, whereas the silt-size fraction averages less than ≈10 wt.% and the clay-size fraction less than 0.5 wt.%. Along the 326-km runout, these particle-size fractions vary little, as does the sorting coefficient (average=2.6). There is no tendency toward grading or improved sorting. Limited bulking is recognized. The CVL was an enormous non-cohesive debris flow, notable for its ash-flow origin and immense volume and peak discharge which gave it characteristics and a behavior akin to large cohesive mudflows. Significantly, then, ash-flow-generated debris flows can also achieve large volumes and cover great areas; thus, they can conceivably affect large populated regions far from their source. Especially dangerous, therefore, are snow-clad volcanoes with recent silicic ash-flow histories such as those found in the Andes and Alaska.

Cotopaxi Volcano↗

USGS1969

The Geologic Story of the Uinta Mountains

The opening of the West after the Civil War greatly stimulated early geologic exploration west of the 100th Meridian. One of the areas first studied, the Uinta Mountains region, gained wide attention as a result of the explorations of three Territorial Surveys, one headed by John Wesley Powell, one by Clarence King, and one by Ferdinand V. Hayden. Completion of the Union Pacific Railroad across southern Wyoming 100 years ago, in 1869, materially assisted geologic exploration, and the railheads at Green River and Rock Springs greatly simplified the outfitting of expeditions into the mountains. The overlap of the Powell, King, and Hayden surveys in the Uinta Mountains led to efforts that were less concerted than competitive and not without acrimony. Many parts of the area were seen by all three parties at almost the same time. Duplication was inevitable, of course, but all three surveys contributed vast quantities of new knowledge to the storehouse of geology, and many now-basic concepts arose from their observations. Powell's area of interest extended mainly southward from the Uinta Mountains to the Grand Canyon, including the boundless plateaus and canyons of southern Utah and northern Arizona. King's survey extended eastward from the High Sierra in California to Cheyenne, Wyoming, and encompassed a swath of country more than 100 miles wide. Hayden's explorations covered an immense region of mountains and basins from Yellowstone Park in Wyoming southeast throughout most of Colorado. Powell first entered the Uinta Mountains in the fall of 1868, having traveled north around the east end of the range from the White River country to Green River, Wyoming, then south over a circuitous route to Flaming Gorge and Browns Park, and finally back to the White River, where he spent the winter. In 1869, after reexamining much of the area visited the previous season, Powell embarked on his famous 'first boat trip' down the Green and Colorado Rivers. This trip was more exploratory than scientific; his second, more scientific trip was made 2 years later. Powell revisited the Uinta Mountains in 1874 and 1875 to complete the studies begun 6 years earlier. His classic 'Report on the Geology of the Eastern Portion of the Uinta Mountains and a Region of Country Adjacent Thereto' was published in 1876. King's survey?officially 'The United States Geological Exploration of the Fortieth Parallel'?is better known simply as the '40th Parallel Survey.' King began working eastward from California in 1867. The Uinta Mountains region, however, was mapped by S. F. Emmons, under the supervision of King, in the summers of 1869 and 1871. Emmons' work was monumental, and although he emphasized in his letter of transmittal to King the exploratory nature of the work?as the formal title of the report indicates?his maps, descriptions, and conclusions reflect a comprehensive understanding of the country and its rocks. The 40th Parallel report contains the best, most complete early descriptions of the Uinta Mountains. It, indeed, is a treasurechest of information and a landmark contribution to the emerging science of geology. Hayden visited the Uinta Mountains in 1870, descending the valley of Henrys Fork to Flaming Gorge in the fall after having earlier examined the higher part of the range to the west. Most of Hayden's observations were cursory, and he repeatedly expressed regret at having insufficient time for more detailed studies. In reference to the area between Clay Basin and Browns Park, he remarked (Hayden, 1871, p. 67) somewhat dryly that 'the geology of this portion of the Uinta range is very complicated and interesting. To have solved the problem to my entire satisfaction would have required a week or two.' Eighty-odd years later I spent several months there?looking at the same rocks. Powell was perhaps more creative?more intuitive?than either King or Hayden, and his breadth of interest in the fields of geology, physiography, ethnology, an

Bulletin↗

USGS2012

Magnitude of flood flows for selected annual exceedance probabilities in Rhode Island through 2010

Heavy persistent rains from late February through March 2010 caused severe widespread flooding in Rhode Island that set or nearly set record flows and water levels at many long-term streamgages in the State. In response, the U.S. Geological Survey, in partnership with the Federal Emergency Management Agency, conducted a study to update estimates of flood magnitudes at streamgages and regional equations for estimating flood flows at ungaged locations. This report provides information needed for flood plain management, transportation infrastructure design, flood insurance studies, and other purposes that can help minimize future flood damages and risks. The magnitudes of floods were determined from the annual peak flows at 43 streamgages in Rhode Island (20 sites), Connecticut (14 sites), and Massachusetts (9 sites) using the standard Bulletin 17B log-Pearson type III method and a modification of this method called the expected moments algorithm (EMA) for 20-, 10-, 4-, 2-, 1-, 0.5-, and 0.2-percent annual exceedance probability (AEP) floods. Annual-peak flows were analyzed for the period of record through the 2010 water year; however, records were extended at 23 streamgages using the maintenance of variance extension (MOVE) procedure to best represent the longest period possible for determining the generalized skew and flood magnitudes. Generalized least square regression equations were developed from the flood quantiles computed at 41 streamgages (2 streamgages in Rhode Island with reported flood quantiles were not used in the regional regression because of regulation or redundancy) and their respective basin characteristics to estimate magnitude of floods at ungaged sites. Of 55 basin characteristics evaluated as potential explanatory variables, 3 were statistically significant—drainage area, stream density, and basin storage. The pseudo-coefficient of determination (pseudo- R2 ) indicates these three explanatory variables explain 95 to 96 percent of the variance in the flood magnitudes from 20- to 0.2-percent AEPs. Estimates of uncertainty of the at-site and regression flood magnitudes are provided and were combined with their respective estimated flood quantiles to improve estimates of flood flows at streamgages. This region has a long history of urban development, which is considered to have an important effect on flood flows. This study includes basins that have an impervious area ranging from 0.5 to 37 percent. Although imperviousness provided some explanatory power in the regression, it was not statistically significant at the 95-percent confidence level for any of the AEPs examined. Influence of urbanization on flood flows indicates a complex interaction with other characteristics that confounds a statistical explanation of its effects. Standard methods for calculating magnitude of floods for given AEP are based on the assumption of stationarity, that is, the annual peak flows exhibit no significant trend over time. A subset of 16 streamgages with 70 or more years of unregulated systematic record indicates all but 4 streamgages have a statistically significant positive trend at the 95-percent confidence level; three of these are statistically significant at about the 90-percent confidence level or above. If the trend continues linearly in time, the estimated magnitude of floods for any AEP, on average, will increase by 6, 13, and 21 percent in 10, 20, and 30 years' time, respectively. In 2010, new peaks of record were set at 18 of the 21 active streamgages in Rhode Island. The updated flood frequency analysis indicates the peaks at these streamgages ranged from 2- to 0.2-percent AEP. Many streamgages in the State peaked at a 0.5- and 0.2-percent AEP, except for streamgages in the Blackstone River Basin, which peaked from a 4- to 2-percent AEP.

Rhode Island↗

USGS1983

The ophiolitic North Fork terrane in the Salmon River region, central Klamath Mountains, California

The North Fork terrane is an assemblage of ophiolitic and other oceanic volcanic and sedimentary rocks that has been internally imbricated and folded. The ophiolitic rocks form a north-trending belt through the central part of the region and consist of a disrupted sequence of homogeneous gabbro, diabase, massive to pillowed basalt, and interleaved tectonitic harzburgite. U-Pb zircon age data on a plagiogranite pod from the gabbroic unit indicate that at least this part of the igneous sequence is late Paleozoic in age. The ophiolitic belt is flanked on either side by mafic volcanic and volcaniclastic rocks, limestone, bedded chert, and argillite. Most of the chert is Triassic, including much of Late Triassic age, but chert with uncertain stratigraphic relations at one locality is Permian. The strata flanking the east side of the ophiolitic belt face eastward, and depositional contacts between units are for the most part preserved. The strata on the west side of the ophiolitic belt are more highly disrupted than those on the east side, contain chert-argillite melange, and have unproven stratigraphic relation to either the ophiolitic rocks or the eastern strata. Rocks of the North Fork terrane do not show widespread evidence of penetrative deformation at elevated temperatures, except an early tectonitic fabric in the harzburgite. Slip-fiber foliation in serpentinite, phacoidal foliation in chert and mafic rocks, scaly foliation in argillite, and mesoscopic folds in bedded chert are consistent with an interpretation of large-scale anti-formal folding of the terrane about a north-south hinge found along the ophiolitic belt, but other structural interpretations are tenable. The age of folding of North Fork rocks is constrained by the involvement of Triassic and younger cherts and crosscutting Late Jurassic plutons. Deformation in the North Fork terrane must have spanned a short period of time because the terrane is bounded structurally above and below by Middle or Late Jurassic thrust faults. The North Fork terrane appears to contain no arc volcanic rocks or arc-derived detritus, suggesting that it neither constituted the base for an arc nor was in a basinal setting adjacent to an arc sediment source. Details of the progressive accretion and evolutionary relationship of the North Fork to other terranes of the Klamath Mountains are not yet clear.

California↗

USGS2004

Upper Cretaceous sequences and sea-level history, New Jersey Coastal Plain

We developed a Late Cretaceous sealevel estimate from Upper Cretaceous sequences at Bass River and Ancora, New Jersey (ODP [Ocean Drilling Program] Leg 174AX). We dated 11-14 sequences by integrating Sr isotope and biostratigraphy (age resolution ??0.5 m.y.) and then estimated paleoenvironmental changes within the sequences from lithofacies and biofacies analyses. Sequences generally shallow upsection from middle-neritic to inner-neritic paleodepths, as shown by the transition from thin basal glauconite shelf sands (transgressive systems tracts [TST]), to medial-prodelta silty clays (highstand systems tracts [HST]), and finally to upper-delta-front quartz sands (HST). Sea-level estimates obtained by backstripping (accounting for paleodepth variations, sediment loading, compaction, and basin subsidence) indicate that large (>25 m) and rapid (???1 m.y.) sea-level variations occurred during the Late Cretaceous greenhouse world. The fact that the timing of Upper Cretaceous sequence boundaries in New Jersey is similar to the sea-level lowering records of Exxon Production Research Company (EPR), northwest European sections, and Russian platform outcrops points to a global cause. Because backstripping, seismicity, seismic stratigraphic data, and sediment-distribution patterns all indicate minimal tectonic effects on the New Jersey Coastal Plain, we interpret that we have isolated a eustatic signature. The only known mechanism that can explain such global changes-glacio-eustasy-is consistent with foraminiferal ??18O data. Either continental ice sheets paced sea-level changes during the Late Cretaceous, or our understanding of causal mechanisms for global sea-level change is fundamentally flawed. Comparison of our eustatic history with published ice-sheet models and Milankovitch predictions suggests that small (5-10 ?? 106 km3), ephemeral, and areally restricted Antarctic ice sheets paced the Late Cretaceous global sea-level change. New Jersey and Russian eustatic estimates are typically one-half of the EPR amplitudes, though this difference varies through time, yielding markedly different eustatic curves. We conclude that New Jersey provides the best available estimate for Late Cretaceous sea-level variations. ?? 2004 Geological Society America.

Geological Society of America Bulletin↗

USGS1990

Occurrence and geochemistry of natural gases, Piceance Basin, northwest Colorado

The Piceance basin is a hydrocarbon-rich province that has natural gas production from reservoirs ranging in age from Late Jurassic to Eocene and large undeveloped resources of natural gas in coal beds and tight sandstone reservoirs of Cretaceous age. Gases from all producing intervals are of predominantly thermal origin and become isotopically heavier (delta isotope{13}C[1]: -51.3 to -29.1 o/oo) and chemically drier (C[1]/C[1-5]: 0.26 to 1.00) with increasing thermal maturity of reservoirs (R[o]: 0.45 to 2.40%) over a depth range of 1100 to 11,702 ft (335-3567 m). Scatter in trend is attributed to source rock differences and considerable vertical and lateral migration. Based on chemical and isotopic composition, three major types of gases can be distinguished: those generated from mixed type II and III kerogens, those from dispersed type III kerogen, and those from coal. Gases generated from mixed type II and III kerogens are produced from the Upper Jurassic Morrison Formation, the Lower Cretaceous Cedar Mountain Formation, the Upper Cretaceous Dakota Sandstone, the Upper Cretaceous Mancos "B" producing interval, and marginal marine sandstones of the Upper Cretaceous Iles producing interval. These gases are associated with minor amounts of oil and probably were generated from kerogen in the marine Mancos Shale. Gases generated from dispersed type III kerogen are produced from nonmarine sandstones of the Upper Cretaceous Williams Fork producing inter al and from thermally immature reservoirs in the overlying Paleocene and Eocene Fort Union and Wasatch Formations. These nonassociated gases contain large amounts of CO[2] and probably were generated from carbonaceous shales in the Williams Fork producing interval. Their presence in immature Fort Union and Wasatch reservoirs implies considerable vertical migration. The third type of gas is methane rich, is produced by devolatilization of humic coal, and is generally in coal beds of the Cameo-Fairfield zone of the Williams Fork producing interval. These gases are not the major source for adjacent sandstone reservoirs. A fourth, distinct type of isotopically light thermogenic gas occurs in immature reservoirs of the Eocene Green River Formation. This gas is inferred to have migrated from u identified deeper, more mature source rocks.

Colorado↗

USGS2012

Owyhee River intracanyon lava flows: does the river give a dam?

Rivers carved into uplifted plateaus are commonly disrupted by discrete events from the surrounding landscape, such as lava flows or large mass movements. These disruptions are independent of slope, basin area, or channel discharge, and can dominate aspects of valley morphology and channel behavior for many kilometers. We document and assess the effects of one type of disruptive event, lava dams, on river valley morphology and incision rates at a variety of time scales, using examples from the Owyhee River in southeastern Oregon. Six sets of basaltic lava flows entered and dammed the river canyon during two periods in the late Cenozoic ca. 2 Ma–780 ka and 250–70 ka. The dams are strongly asymmetric, with steep, blunt escarpments facing up valley and long, low slopes down valley. None of the dams shows evidence of catastrophic failure; all blocked the river and diverted water over or around the dam crest. The net effect of the dams was therefore to inhibit rather than promote incision. Once incision resumed, most of the intracanyon flows were incised relatively rapidly and therefore did not exert a lasting impact on the river valley profile over time scales >10 6 yr. The net long-term incision rate from the time of the oldest documented lava dam, the Bogus Rim lava dam (≤1.7 Ma), to present was 0.18 mm/yr, but incision rates through or around individual lava dams were up to an order of magnitude greater. At least three lava dams (Bogus Rim, Saddle Butte, and West Crater) show evidence that incision initiated only after the impounded lakes filled completely with sediment and there was gravel transport across the dams. The most recent lava dam, formed by the West Crater lava flow around 70 ka, persisted for at least 25 k.y. before incision began, and the dam was largely removed within another 35 k.y. The time scale over which the lava dams inhibit incision is therefore directly affected by both the volume of lava forming the dam and the time required for sediment to fill the blocked valley. Variations in this primary process of incision through the lava dams could be influenced by additional independent factors such as regional uplift, drainage integration, or climate that affect the relative base level, discharge, and sediment yield within the watershed. By redirecting the river, tributaries, and subsequent lava flows to different parts of the canyon, lava dams create a distinct valley morphology of flat, broad basalt shelves capping steep cliffs of Tertiary sediment. This stratigraphy is conducive to landsliding and extends the effects of intracanyon lava flows on channel geomorphology beyond the lifetime of the dams.

Oregon↗

USGS1941

Subsurface geology and oil and gas resources of Osage County, Oklahoma. Part 8, Parts of township 20 north, ranges 9 and 10 east, and township 21 north, ranges 8 and 9 east and all of township 21 north, range 10 east

The area whose subsurface geology and oil and gas resources are described in this report lies along the southern border of Osage County, Okla., and includes parts of T. 20 N., Rs. 9 and 10 E., and of T. 21 N., Rs. 8 and 9 E., and all of T. 21 N., R. 10 E. The towns of Osage and Prue are within the area; Cleveland, which is a mile south of the Arkansas River, is not far beyond its southwestern limit; and Tulsa is 10 miles east of its southeast corner. The production of oil and gas from the many fields in the five townships began as early as 1905, and drilling has continued up to the present. Oil or gas is produced from 13 zones at depths ranging from 250 to 2,600 feet. Of these zones, one is in the Ordovician system, one is at the contact of the Mississippian and the Pennsylvanian series, and all others are in the Pennsylvanian series. The five townships lie within a region that contains many oil and gas fields in the Bartlesville sand; the Red Fork sand is oil-bearing in a narrow belt in T. 21 N., R. 8 E.; and oil and gas are produced in small areas from the Taneha, Skinner, Squirrel, Cleveland, Jones, and Layton sands, the Mussehem and Peoples sand zone, the Okesa, Torpedo, and Clem Creek sand zone, and the Big lime and Peru sand zone. The rocks dip westward across the five townships at an average rate of about 38 feet to the mile as measured on the top of the Oswego lime. This regional dip is interrupted, however, by many anticlines, domes, synclines, and structural basins. The subsurface crests of most of the domes and anticlines are not directly under the crests as determined on the exposed rocks, and the dips of the deeper rocks are steeper and the structural closures greater in the buried rocks than in the exposed rocks. The exposed rocks are cut by several faults that trend northwest, but the data are insufficient to determine whether the deeply buried rocks, also, are displaced along the faults. This investigation has shown that there are a few localities not yet completely tested in this part of Osage County that may produce oil and gas and that a few producing oil fields have areas within or adjacent to them that have not been thoroughly prospected. It is pointed out that yields of oil and gas from limy reservoir rocks may be increased by acid treatment and that additional oil may be produced from some of the reservoir sands by repressuring them with gas or flooding them with water.

Oklahoma↗

USGS1980

Shallow, low-permeability reservoirs of northern Great Plains: Assessment of their natural gas resources.

Major resources of natural gas are entrapped in low-permeability, low-pressure reservoirs at depths less than 4,000 ft (1,200 m) in the northern Great Plains. This shallow gas is the product of the immature stage of hydrocarbon generation and is referred to as biogenic gas. Prospective low-permeability, gas-bearing reservoirs range in age from late Early to Late Cretaceous and include most of the section from the base of the Mowry Shale to the top of the Judith River Formation. For detailed examination, the potential reservoir section was divided into five intervals represented by one or more formations and their correlatives. The intervals selected correspond to (1) Mowry Shale, (2) Belle Fourche Shale and Greenhorn Formation, (3) Carlile Shale, (4) Niobrara and Telegrap Creek Formations and Eagle Sandstone, and (5) Claggett Shale and Judith River Formation and their equivalents. Within each interval, several different facies are developed. The following facies were identified and mapped for each interval: nonmarine rocks, coastal sandstones, shelf sandstones, siltstones, shales, and chalks. Two types of shelf sandstone were differentiated but generally not mapped separately because of lack of well log control. The "sand ridge" type has reservoir properties comparable to coastal sandstones and occurs as isolated tongues as much as 75 ft (23 m) thick. The second type of shelf sandstone is in beds commonly less than 1 in. (3 cm) thick which are interbedded with shale and contain a high content of allogenic silt- and clay-size material. It is impossible to differentiate these individual beds on conventional well logs. The siltstone and shale facies are grouped to ether because conventional logs cannot distinguish between these two rock types, particularly when they are interbedded. For future evaluation of natural gas resources from low-permeability reservoirs, it will be necessary to differentiate between the siltstone and shale facies and to identify individual beds, particularly very thin ones, within the shelf sandstone facies. Each facies contains distinct reservoir types, some of which are low in permeability. The most promising low-permeability reservoirs are developed in the shelf sandstone, siltstone, and chalk facies. Reservoirs within these facies are particularly attractive because they are enveloped by thick sequences of shale which serve as both a source and a seal for the gas. When naturally fractured, these shales also may be low-productivity gas reservoirs similar to the Devonian shales of the Appalachian basin. In addition, facies with low-permeability reservoirs are present over most of the study area when maps for all of the intervals are combined. Natural gas is produced from low-permeability reservoirs in the northern Great Plains in the southern part of western Canada. Established production covers an area of approximately 8,000 sq mi (20,700 sq km) where reported recoverable reserves average as much as 2 Bcf sq mi. Using these reserve data as an analog, the United States portion may contain resources of natural gas in excess of 100 Tcf. The volume of recoverable gas in the United States will depend on the development of improved recovery technology and higher gas prices relative to costs.

northern Great Plains↗

USGS1986

Regional correlation of Grande Ronde basalt flows, Columbia River basalt group, Washington, Oregon, and Idaho (USA)

The tholeiitic flood basalts of the Columbia River Basalt Group of middle and late Miocene age cover more than 200,000 km 2 in Washington, Oregon, and Idaho. The most voluminous formation of the Group, the Grande Ronde Basalt, erupted for 2 m.y. from north-northwest-trending fissure systems concentrated in southeast Washington and adjacent Oregon and Idaho. Four magnetostratigraphic units (designated R 1 , N 1 , R 2 , and N 2 from oldest to youngest) are recognized on the basis of polarity in the Grande Ronde and provide the broad stratigraphic framework for the formation. In this study, major-element chemistry and relative stratigraphic position within the polarity intervals are used to identify and correlate individual flows and sequences of flows within the Grande Ronde Basalt on a regional scale. Systematic examination of more than 350 analyses from 47 stratigraphic sections show that most flows fall into one of five major chemical groupings, which are distinguished primarily by small but significant variations in MgO, TiO 2 , and P 2 O 5 content. In addition, four minor chemical types local to the eastern part of the province have been identified. Feeder dikes of each chemical type have also been located. Flows or packets of flows of each chemical type can be correlated between field sections to define specific chemical-stratigraphic subunits. These subunits consist of several flows collectively 30–150 m thick. Subunits of most chemical types are repeated at irregular intervals throughout the formation; no progressive chemical trend occurs within the Grande Ronde. Many of the chemical-stratigraphic subunits extend to the margins of the province, although most are confined to the source region in eastern Washington. Although the total number of subunits is less in the west away from the fissure systems, the total thicknesses of the N 2 and R 2 magnetostratigraphic units are each as thick or thicker than the corresponding units in eastern Washington. The greatest thicknesses occur in the central part of the province within the Pasco basin. The distribution of basalt relative to the location of vents, as well as the relative east-west thicknesses, suggests that basalt flowed hundreds of kilometres westward during the most voluminous Grande Ronde eruptions, ponding against the irregular margin of the Cascade Range and being diverted through the ancestral Columbia Gorge toward the Washington-Oregon coast. Between these huge sheetflood events, smaller eruptions blanketed areas within the source region, and ongoing regional subsidence created a shallow westward-draining basin in the center of the province.

Idaho, Oregon, Washington↗

USGS1968

New theory of recharge to the artesian basin of the Dakotas

The artesian basin of the Dakotas has been studied for many years. The widely held concept has been that recharge enters the equivalents of the Dakota Sandstone, where they are exposed on the flanks of the Black Hills, and moves through this formation to the area of maximum development of the aquifer in eastern North Dakota and South Dakota . Some anomalies, difficult to explain by this concept, have remained unresolved. According to the theory here proposed, recharge enters the Lower Mississippian Pahasapa Limestone and the underlying Englewood Formation where they are exposed on the flanks of the Black Hills. The Pahasapa is in part the equivalent of the Lower and Upper Mississippian Madison Group. The limestones are very cavernous where exposed on the flanks of the Black Hills, and seemingly in the subsurface as well. Streams flowing east from the Precambrian core of the Hills lose virtually all their flow in crossing the cavernous limestones. Widespread karst topography was developed on the Madison during the erosion period which preceded deposition of the Pennsylvanian and Permian Minnelusa Formation. Water moves freely through the cavernous limestone with little head loss for more than 100 miles east of the Black Hills. Pre- Dakota erosion beveled all older rock units and removed many of the intervening beds younger than the Madison. Oil tests indicate that less than 200 feet of strata separate the Madison and Dakota in northern South Dakota east of the Missouri River; this is in marked contrast to the 1800 feet of intervening beds near Rapid City. It is believed that in a zone east of the Missouri River in northern South Dakota and adjacent North Dakota , water which has moved through the limestone more than 150 miles from the Black Hills moves upward into the basal part of the Dakota Sandstone. Much of the water developed in the area of major water use from the Dakota Sandstone has moved a relatively short distance through this formation. The chemical character and artesian pressure of water in the Dakota are influenced significantly by recharge from the Madison Group. West of the zone of recharge the water is highly mineralized and largely of a sodium chloride type. Along the zone of recharge and toward the southeast corner of South Dakota , an area of natural discharge, the water generally is of the calcium sulfate type. North of the Precambrian Sioux Quartzite and east of the calcium sulfate water is an area which has sodium sulfate water. It is inferred that this change results from natural base-exchange softening of the calcium sulfate water as it moves eastward through the Dakota Sandstone.

North Dakota, South Dakota↗

USGS2022

Peak-flow and low-flow magnitude estimates at defined frequencies and durations for nontidal streams in Delaware

Reliable estimates of the magnitude of peak flows in streams are required for the economical and safe design of transportation and water conveyance structures. In addition, reliable estimates of the magnitude of low flows at defined frequencies and durations are needed for meeting regulatory requirements, quantifying base flows in streams and rivers, and evaluating time of travel and dilution of toxic spills. This report, in cooperation with the Delaware Department of Transportation and the Delaware Geological Survey, presents methods for estimating the magnitude of peak flows and low flows at defined frequencies and durations on nontidal streams in Delaware, at locations both monitored by streamflow-gage sites and ungaged. Methods are presented for estimating (1) the magnitude of peak flows for return periods ranging from 2 to 500 years (50-percent to 0.2-percent annual-exceedance probability), and (2) the magnitude of low flows as applied to 7-, 14-, and 30-consecutive day low-flow periods with recurrence intervals of 2, 10, and 20 years (50-, 10-, and 5-percent annual non-exceedance probabilities). These methods are applicable to watersheds that exhibit a full range of development conditions in Delaware. The report also describes StreamStats, a web application that allows users to easily obtain peak-flow and low-flow magnitude estimates for user-selected locations in Delaware. Peak-flow and low-flow magnitude estimates for ungaged sites are obtained using statistical regression analysis through a process known as regionalization, where information from a group of streamflow-gage sites within a region forms the basis for estimates for ungaged sites within the same region. Ninety-four streamflow-gage sites in and near Delaware with at least 10 years of nonregulated annual peak-flow data were used for the peak-flow regression analysis, a subset of the 121 sites for which peak-flow estimates were computed. These sites included both continuous-record streamflow-gage sites as well as partial record sites. Forty-five streamflow-gage sites with at least 10 years of nonregulated low-flow data available were used for the low-flow regression analyses, a subset of the 68 sites for which low-flow estimates were computed. Estimates for gaged sites are obtained by combining (1) the station peak-flow statistics (mean, standard deviation, and skew) and peak-flow estimates using the recent Bulletin 17C guidelines that incorporate the Expected Moments Algorithm with (2) regional estimates of peak-flow magnitude derived from regional regression equations and regional skew derived from sites with records greater than or equal to 35 years. Example peak-flow estimate calculations using the methods presented in the report are given for (1) ungaged sites, (2) gaged sites, (3) sites upstream or downstream from a gaged location, and (4) sites between gaged locations. Estimates for low-flow gaged sites are obtained by combining (1) the station low-flow statistics (mean, standard deviation, and skew) and low-flow estimates with (2) regional estimates of low-flow magnitude derived from regional regression equations. Example low-flow estimate calculations using the methods presented in the report are given for (1) ungaged sites, (2) gaged sites, (3) sites upstream or downstream from a gaged location, and (4) sites between gaged locations. A total of 54 sites in the Coastal Plain region were used to develop peak-flow regressions for the region and 40 sites were used for the Piedmont region. Similarly, 24 sites were used for low-flow regression equation development in the Coastal Plain, with 21 in the Piedmont. Peak and low-flow site inclusion in the Coastal Plain tended to be more restricted with tidal influence and ranges of basin characteristics, including drainage area, limiting regression equation development and application. Regional regression equations for peak flows and low flows, as applicable to ungaged sites in the Piedmont and Coastal Plain Physiographic Provinces in Delaware, are presented. Peak-flow regression equations used variables that quantified drainage area, basin slope, percent area with well-drained soils, percent area with poorly drained soils, impervious area, and percent area of surface water storage in estimating peak-flow estimates, whereas low-flow regression equations used only drainage area and percent poorly drained soils in the estimation of low flows. Average standard errors for peak-flow regressions tended to be lower than those for low- flow regressions, with lower errors in the Piedmont region for both peak- and low-flow regressions. For peak-flow estimates, a sensitivity analysis of Piedmont regression equation estimates to changes in impervious area is also presented. Additional topics associated with the analyses performed during the study are discussed, including (1) the availability and description of 32 basin and climatic characteristics considered during the development of the regional regression equations; (2) the treatment of increasing trends in the annual peak-flow series identified at 18 gaged sites and inclusion in or exclusion from the regional analysis; (3) regional skew analysis and determination of regression regions; (4) sample adjustments and removal of sites owing to regulation and redundancy; and (5) a brief comparison of peak- and low-flow estimates at gages used in previous studies.

Delaware↗