Search USGSSearch

SEARCH · Search USGS

Results for “Marine Structures”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14Linked to original sources

Duration and structure of the past four interglaciations

Reanalysis and additional dating of the Devils Hole ??18O paleotemperature record confirm that the last interglaciation in the Great Basin (the continental analog of marine isotopic substage 5e) lasted ???22,000 yr, consistent with the Vostok paleotemperature record which suggests a duration of ???19,000 yr for this event in Antarctica. The three preceding interglaciations in the Devils Hole record (analogs of marine isotopic substages 7e, 9c, and 11c) range from 20,000 to 26,000 yr in duration. A ???20,000-yr duration for the last interglaciation is consistent with TIMS uranium-series dated sea-level high stands. Thus, the widely held view that interglaciations were of 11,000-to 13,000-yr duration and constituted only about 10% of mid-to-late Pleistocene climatic cycles needs reexamination. The warmest portion of each interglaciation in the Devils Hole time series is marked by a ??18O plateau, signifying apparent climatic stability for periods of 10,000-to 15,000-yr duration. ?? 1997 University of Washington.

Quaternary Research

Cascading effects of fishing on Galapagos rocky reef communities: reanalysis using corrected data

This article replaces Sonnenholzner et al. (2007; Mar Ecol Prog Ser 343:77–85 ), which was retracted on September 19, 2007, due to errors in entry of data on sea urchins. We sampled 10 highly fished and 10 (putatively) lightly fished shallow rocky reefs in the southeastern area of the Galapagos Marine Reserve, Ecuador. After the correction, these are the new results: there was a negative association between slate-pencil urchins Eucidaris galapagensis and non-coralline algae. In addition, pencil urchins were less abundant where there were many predators. An indirect positive association between predators and non-coralline algae occurred. Fishing appeared to affect this trophic cascade. The spiny lobster Panulirus penicillatus , the slipper lobster Scyllarides astori , and the Mexican hogfish Bodianus diplotaenia were significantly less abundant at highly fished sites. Urchin density was higher at highly fished sites. Non-coralline algae were nearly absent from highly fished sites, where a continuous carpet of the anemone Aiptasia sp. was recorded, and the algal assemblage was mainly structured by encrusting coralline and articulated calcareous algae.

Marine Ecology Progress Series

Perspectives and challenges for the use of radar in biological conservation

Radar is at the forefront for the study of broad‐scale aerial movements of birds, bats and insects and related issues in biological conservation. Radar techniques are especially useful for investigating species which fly at high altitudes, in darkness, or which are too small for applying electronic tags. Here, we present an overview of radar applications in biological conservation and highlight its future possibilities. Depending on the type of radar, information can be gathered on local‐ to continental‐scale movements of airborne organisms and their behaviour. Such data can quantify flyway usage, biomass and nutrient transport (bioflow), population sizes, dynamics and distributions, times and dimensions of movements, areas and times of mass emergence and swarming, habitat use and activity ranges. Radar also captures behavioural responses to anthropogenic disturbances, artificial light and man‐made structures. Weather surveillance and other long‐range radar networks allow spatially broad overviews of important stopover areas, songbird mass roosts and emergences from bat caves. Mobile radars, including repurposed marine radars and commercially dedicated ‘bird radars’, offer the ability to track and monitor the local movements of individuals or groups of flying animals. Harmonic radar techniques have been used for tracking short‐range movements of insects and other small animals of conservation interest. However, a major challenge in aeroecology is determining the taxonomic identity of the targets, which often requires ancillary data obtained from other methods. Radar data have become a global source of information on ecosystem structure, composition, services and function and will play an increasing role in the monitoring and conservation of flying animals and threatened habitats worldwide.

Ecography

Geologic resource evaluation of Pu'ukohola Heiau National Historic Site, Hawai'i; Part I, geology and coastal landforms

Geologic resource inventories of lands managed by the National Park Service (NPS) are important products for the parks and are designed to provide scientific information to better manage park resources. Park-specific geologic reports are used to identify geologic features and processes that are relevant to park ecosystems, evaluate the impact of human activities on geologic features and processes, identify geologic research and monitoring needs, and enhance opportunities for education and interpretation. These geologic reports are planned to provide a brief geologic history of the park and address specific geologic issues forming a link between the park geology and the resource manager. The Kona coast National Parks of the Island of Hawai'i are intended to preserve the natural beauty of the Kona coast and protect significant ancient structures and artifacts of the native Hawaiians. Pu'ukohola Heiau National Historic Site (PUHE), Kaloko-Honokohau National Historical Park (KAHO), and Pu'uhonua O Honaunau National Historical Park (PUHO) are three Kona parks studied by the U.S. Geological Survey (USGS) Coastal and Marine Geology Team in cooperation with the National Park Service. This report is one of six related reports designed to provide geologic and benthic-habitat information for the three Kona parks. Each geology and coastal-landform report describes the regional geologic setting of the Hawaiian Islands, gives a general description of the geology of the Kona coast, and presents the geologic setting and issues for one of the parks. The related benthic-habitat mapping reports discuss the marine data and habitat classification scheme, and present results of the mapping program. Pu'ukohola Heiau National Historic Site (PUHE) is the smallest (~86 acres) of three National Parks located on the leeward Kona coast of the Island of Hawai'i. The main structure at PUHE, Pu'ukohola Heiau, is an important historical temple that was built during 1790-91 by King Kamehameha I (also known as Kamehameha the Great) and is often associated with the founding of the Hawaiian Kingdom (Greene, 1993). The temple was constructed to incur the favor of the king's personal war god Kuka'ilimoku during the time that Kamehameha I waged several battles in an attempt to extend his control over all the Hawaiian Islands. The park is also the site of the older Mailekini Heiau, which was used by the ancestors of Kamehameha I, and an offshore, submerged temple, Hale O Kapuni Heiau, that was dedicated to the shark god. The park occupies the scenic Hill of the Whale overlooking Kawaihae Bay and Pelekane Beach. The seaward-sloping lands of PUHE lie at the convergence of lava flows formed by both Mauna Kea and Kohala Volcanoes. The park coastline is mostly rocky, with the exception of a small beach developed at the north boundary where an intermittent stream enters the sea. The park is bounded to the north by Kawaihae Harbor, to the south by Samuel M. Spencer Beach Park, and to the west by a broad submerged reef. The adjacent reef area is discussed in detail in the accompanying report by Cochran and others (2006). They mapped from the shoreline to depths of approximately 40 m, where the shelf drops off to a sand-covered bottom. PUHE park boundaries extend only to the mean high-tide line, however, landscape impacts created by development around the park are of concern to Park management.

Hawaii

Continental Shelf Morphology and Stratigraphy Offshore San Onofre, CA: The Interplay Between Rates of Eustatic Change and Sediment Supply

New high-resolution CHIRP seismic data acquired offshore San Onofre, southern California reveal that shelf sediment distribution and thickness are primarily controlled by eustatic sea level rise and sediment supply. Throughout the majority of the study region, a prominent abrasion platform and associated shoreline cutoff are observed in the subsurface from ~ 72 to 53 m below present sea level. These erosional features appear to have formed between Melt Water Pulse 1A and Melt Water Pulse 1B, when the rate of sea-level rise was lower. There are three distinct sedimentary units mapped above a regional angular unconformity interpreted to be the Holocene transgressive surface in the seismic data. Unit I, the deepest unit, is interpreted as a lag deposit that infills a topographic low associated with an abrasion platform. Unit I thins seaward by downlap and pinches out landward against the shoreline cutoff. Unit II is a mid-shelf lag deposit formed from shallower eroded material and thins seaward by downlap and landward by onlap. The youngest, Unit III, is interpreted to represent modern sediment deposition. Faults in the study area do not appear to offset the transgressive surface. The Newport Inglewood/Rose Canyon fault system is active in other regions to the south (e.g., La Jolla) where it offsets the transgressive surface and creates seafloor relief. Several shoals observed along the transgressive surface could record minor deformation due to fault activity in the study area. Nevertheless, our preferred interpretation is that the shoals are regions more resistant to erosion during marine transgression. The Cristianitos fault zone also causes a shoaling of the transgressive surface. This may be from resistant antecedent topography due to an early phase of compression on the fault. The Cristianitos fault zone was previously defined as a down-to-the-north normal fault, but the folding and faulting architecture imaged in the CHIRP data are more consistent with a strike-slip fault with a down-to-the-northwest dip-slip component. A third area of shoaling is observed off of San Mateo and San Onofre creeks. This shoaling has a constructional component and could be a relict delta or beach structure. (C) 2015 Elsevier B.V. All rights reserved.

California

U.S. Geological Survey program of offshore resource and geoenvironmental studies, Atlantic-Gulf of Mexico region, from September 1, 1976, to December 31, 1978

Mineral and energy resources of the continental margins of the United States arc important to the Nation's commodity independence and to its balance of payments. These resources are being studied along the continental margins of the Atlantic Ocean and the Gulf of Mexico in keeping with the mission of the U.S. Geological Survey to survey the geologic structures, mineral resources, and products of the national domain.'(Organic Act of 1879). An essential corollary to these resource studies is the study of potential geologic hazards that may be associated with offshore resource exploration and exploitation. In cooperation with the U.S. Bureau of Land Management, the Geological Survey, through its Atlantic-Gulf of Mexico Marine Geology Program, carries out extensive research to evaluate hazards from sediment mobility, shallow gas, and slumping and to acquire information on the distribution and concentration of trace metals and biogenic and petroleum-derived hydrocarbons in sea-floor sediments. All these studies arc providing needed background information, including information on pollutant dispersal, on the nearshore, estuarine, and lacustrine areas that may be near pipeline and nuclear powerplant sites. Users of these data include the Congress, many Federal agencies, the coastal States, private industry, academia, and the concerned public. The results of the regional structural, stratigraphic, and resource studies carried out under the Atlantic-Gulf of Mexico Marine Geology Program have been used by the Geological Survey and the Bureau of Land Management to select areas for future leasing and to aid in the evaluation of tracts nominated for leasing. Resource studies have concentrated mostly on the Atlantic Outer Continental Shelf frontier areas. Geologic detailing of five major basins along the U.S. Atlantic margin, where sediments are as much as 14 km thick, have been revealed by 25,000 km of 24-and 48-channel common-depth-point seismic data, 187,000 km of acromagnetic data, and 39,000 km of gravity data, plus 10,000 samples and logs obtained from U.S. Geological Survey and industry drilling (for example, coreholes of the Atlantic Slope Program, Joint Oceanographic Institutions Deep Earth Sampling, Continental Offshore Stratigraphic Tests, and the Atlantic Margin Coring Program). A sedimentary section of Jurassic and Cretaceous age grades from terrigenous clastic rocks nearshore to carbonate rocks offshore; this section is part of an extensive buried bank-platform complex that could contain large reserves of natural gas and oil. The volume of sediment deposited offshore far exceeds the volume deposited onshore where extensive accumulations of oil, gas, and minerals have been found. Commercial exploratory drilling offshore thus far has been limited to the Baltimore Canyon Trough area off New Jersey, where at least two holes have found gas; leasing has taken place in the Southeast Georgia Embayment, where drilling was scheduled to begin in 1979, and is imminent in the Georges Bank area off New England. In addition, hydrogeologic and hydrochemical data obtained from the drilling studies have delineated freshwater-bearing submarine extensions of land aquifers that are important coastal ground-water resources. Hazards in the Georges Bank area include sand mobility associated with strong currents and storm-driven waves; high concentrations of suspended sediment in the water column that, when mixed with spilled oil, may sink to the bottom; and slumping along the upper slope. In the Baltimore Canyon, high sediment mobility accompanies major winter storms, and slumped material may cover as much as 20 percent of the upper slope. Potentially unstable slope areas are being studied in great detail to provide data on timing, triggering mechanisms, and rates of sediment movement. In the Southeast Georgia Embayment and Blake Plateau Basin, strong Gulf Stream flow poses a major problem to all offshore operations. In the Gulf o

Circular

Lower Paleozoic host rocks in the Getchell gold belt: Several distinct allochthons or a sequence of continuous sedimentation?

The lower Paleozoic rocks that host gold deposits along the Getchell gold belt in Humboldt County, Nevada, represent several allochthonous terranes rather than a sequence of continuous deposition. The term "terrane" is used only in a descriptive sense. Evidence for allochthonous terranes in this area includes fault boundaries and differences in age, lithology, and structural style among several rock sequences. The two most widespread and distinct terranes in the area are (1) the Osgood terrane, which consists of intensely deformed, regionally metamorphosed, marine rocks (Lower Cambrian Osgood Mountain Quartzite, Lower Cambrian to Lower Ordovician Preble Formation, and some rocks currently mapped as Comus Formation) and (2) the Getchell terrane, which consists of less deformed chert, clastic sedimentary rocks, and volcanic rocks (rocks mapped as Valmy and Vinini Formations, including Lower and Upper Ordovician and Lower Silurian strata in this region). Osgood-terrane bedding and foliation dip predominantly eastward, and folds verge westward. Getchell-terrane folds verge southeastward. The Comus Formation, which is Middle Ordovician at its type locality on Edna Mountain, represents a third terrane (Iron Point terrane) situated structurally between the Osgood and Getchell terranes. Use of the unit name Comus Formation outside the type locality has created confusion and needs reexamination. Some of the rocks currently mapped as Comus Formation might really be part of the other terranes.

Geology

The Chesapeake Bay bolide impact: A convulsive event in Atlantic Coastal Plain evolution

Until recently, Cenozoic evolution of the Atlantic Coastal Plain has been viewed as a subcyclical continuum of deposition and erosion. Marine transgressions alternated with regressions on a slowly subsiding passive continental margin, their orderly succession modified mainly by isostatic adjustments, occasional Appalachian tectonism, and paleoclimatic change. This passive scenario was dramatically transformed in the late Eocene, however, by a bolide impact on the inner continental shelf. The resultant crater is now buried 400–500 m beneath lower Chesapeake Bay, its surrounding peninsulas, and the continental shelf east of Delmarva Peninsula. This convulsive event, and the giant tsunami it engendered, fundamentally changed the regional geological framework and depositional regime of the Virginia Coastal Plain, and produced the following principal consequences. (1) The impact excavated a roughly circular crater, twice the size of Rhode Island (∼6400 km 2 ) and nearly as deep as the Grand Canyon (∼1.3 km deep). (2) The excavation truncated all existing ground-water aquifers in the target area by gouging ∼4300 km 3 of rock from the upper lithosphere, including Proterozoic and Paleozoic crystalline basement rocks and Middle Jurassic to upper Eocene sedimentary rocks. (3) Synimpact depositional processes, including ejecta fallback, massive crater-wall failure, water-column collapse, and tsunami backwash, filled the crater with a porous breccia lens, 600–1200 m thick, at a phenomenal rate of ∼1200 m/hr. The breccia lens replaced the truncated ground-water aquifers with a single 4300 km 3 reservoir, characterized by ground water ∼1.5 times saltier than normal sea water (chlorinities as high as 25,700 mg/l). (4) A structural and topographic low, created by differential subsidence of the compacting breccia, persisted over the crater at least through the Pleistocene. In the depression are preserved postimpact marine lithofacies and biofacies (upper Eocene, lower Oligocene, lower Miocene) not known elsewhere in the Virginia Coastal Plain. (5) Long-term differential compaction and subsidence of the breccia lens spawned extensive fault systems in the postimpact strata. Many of these faults appear to reach the bay floor, and may be potential hazards for motion-sensitive structures in population centers around Chesapeake Bay. Near-surface fracturing and faulting generated by the impact shock may extend as far as 90 km from the crater rim. (6) Having never completely filled with postimpact sediments, the sea-floor depression over the crater appears to have predetermined the location of Chesapeake Bay. (7) As large impact craters are principal sources for some of the world's precious metals, it is reasonable to expect that metal-enriched sills, dikes, and melt sheets are present in the inner basin of the crater. In addition to these specific consequences, the crater and the convulsive event that produced it, have widespread implications for traditional interpretations of certain structural and depositional features of the Atlantic Coastal Plain, particularly in southeastern Virginia.

Chesapeake Bay

Geology of Kapingamarangi Atoll, Caroline Islands

Kapingamarangi Atoll of the Caroline Islands consists of a peripheral reef, 1000-4000 feet across, surrounding a nearly circular lagoon which is 5 by 6 nautical miles in area and about 240 feet at maximum depth. Thirty-three islands, most of which are less than half a mile in length, are scattered along the eastern half of the peripheral reef. At least 75 patch reefs, most of which are small, nearly symmetrical mounds, rise to the surface of the lagoon. The peripheral reef and the patch reefs, composed largely of the stony structures of corals and coralline algae, have flat upper surfaces, apparently the result of bevelling by waves during a recent lowering of sea level. The islands on the peripheral reef are formed of partially consolidated stratified sediments composed of clastic limestone particles and the shells of marine animals. These islands are migrating lagoonward across the reef flat because of erosion on the seaward sides and the growth of beaches and bars on the opposite sides. Soils on the islands are poorly developed and retain much of the texture, structure, and composition of the parent rock or sediment. They consist chiefly of mechanical mixtures of carbonaceous material and lime gravel, lime sand, or lime mud. Phosphorite is present on some islands and is still forming locally where apatite derived from bird guano is reacting with limestones. The tidal fluctuation of ground-water lenses, determined on islands of several sizes, ranges from about 4 to 18 inches. In one very small island where the water is brackish, the rise is much greater. The time lag between tidal movements and the rise and fall of fresh water in the islands ranges from a few minutes on very small islands up to 5 hours on some large ones. This time lag is controlled by the permeability of rocks composing an island and varies from one area to another according to the distribution of rock types. The lagoon contains six concentric belts of bottom sediment; in each, the composition and texture depend on the depth of water in which it occurs. Lime sand and lime gravel derived for the most part from the shells of animals form most of the sediment, but a lime mud covers the bottom of the deepest parts of the lagoon. Waves and currents cause gradation between types of sediment to a depth of about 30 feet, but little mixing was detected at greater depths.

Kapingamarangi Atoll, Caroline Islands

Deposition of the Tapeats Sandstone (Cambrian) in central Arizona

Grain size, bedding thickness, dispersion of cross-stratification azimuths, and assemblages of sedimentary structures and trace fossils vary across central Arizona; they form the basis for recognizing six facies (A through F) in the Tapeats Sandstone. Five of these (A through E), present in western central Arizona, are marine deposits containing the trace fossil Corophioides ; several intertidal environments are represented. The association of large-scale cross-bedding (50 to 300 cm) that is characterized by compound cross-stratification, numerous reactivation surfaces, and herringbone patterns is typical of facies A and generally typical of the finer-grained, thinner-bedded facies B. The sedimentary structures and polymodal distribution of foreset azimuths common to facies A and B probably formed on intertidal sand bars during emergence and late-stage tidal runoff. Facies C consists of well-sorted sandstone, gently cross stratified or with continuous parallel stratification, and foresets tangential to the lower bedding surface. This facies generally occurs where the gradient of the depositional surface increases; it apparently was deposited on a beach by shoaling waves. Facies D and, to a lesser extent, the coarser-grained facies E are sandstones with trough cross-stratification, fining-upward cycles, abundant intercalated thin shale and sandstone, rare flaser bedding, and local bipolar distribution of foreset azimuths. Both facies are tidal flat deposits; facies D was probably produced by meandering tidal channels, whereas facies E was likely produced by migration of braided tidal channels. The sixth facies (F), present in eastern central Arizona, is an arkosic small-pebble conglomerate that lacks trace fossils; low dispersion of foreset azimuths and large-scale (1 to 11-m wide) cut-and-fill structure are typical. Facies F was deposited by bedload streams that transported coarse, poorly sorted sand and gravel westward to the intertidal flats.

Arizona

Kinematic evolution of a large paraglacial landslide in the Barry Arm fjord of Alaska

Our warming climate is adversely affecting cryospheric landscapes via glacial retreat, permafrost degradation, and associated slope destabilization. In Prince William Sound, Alaska, the rapid retreat of Barry Glacier has destabilized the slopes flanking the glacier, resulting in numerous landslides. The largest of these landslides (∼500 Mm 3 in volume) is more than 2 km wide and has the potential to generate a tsunami that could affect nearby recreationists, marine traffic, infrastructure, natural and cultural resources, and the community of Whittier, located 60 km from the landslide. Here, we combine landslide structural and kinematic element mapping with data acquired from bi-yearly airborne lidar, multi-week satellite-based synthetic aperture radar (SAR), sub-hourly ground-based SAR, and seismic monitoring from 2020 to 2022 to characterize this landslide and examine its evolution. While some methods serve as a snapshot in time that is a culmination of events, others emphasize the ever-evolving nature of the landslide and associated hazards. Four major kinematic elements define the overall structure of the landslide, which vary in deformation type and rate, from creep (5 mm per day over several months) to episodic movement (2 m in 30 days) and landslide-wide to localized events. In some areas of the landslide, short-term deformation deviates from structures formed by cumulative movement, implying structural and kinematic evolution associated with glacier retreat. These insights are important for assessing landslide hazards and hazard evolution for large, slow-moving bedrock landslides in actively deglaciating environments.

Alaska

Nonlinear refraction and reflection travel time tomography

We develop a rapid nonlinear travel time tomography method that simultaneously inverts refraction and reflection travel times on a regular velocity grid. For travel time and ray path calculations, we apply a wave front method employing graph theory. The first-arrival refraction travel times are calculated on the basis of cell velocities, and the later refraction and reflection travel times are computed using both cell velocities and given interfaces. We solve a regularized nonlinear inverse problem. A Laplacian operator is applied to regularize the model parameters (cell slownesses and reflector geometry) so that the inverse problem is valid for a continuum. The travel times are also regularized such that we invert travel time curves rather than travel time points. A conjugate gradient method is applied to minimize the nonlinear objective function. After obtaining a solution, we perform nonlinear Monte Carlo inversions for uncertainty analysis and compute the posterior model covariance. In numerical experiments, we demonstrate that combining the first arrival refraction travel times with later reflection travel times can better reconstruct the velocity field as well as the reflector geometry. This combination is particularly important for modeling crustal structures where large velocity variations occur in the upper crust. We apply this approach to model the crustal structure of the California Borderland using ocean bottom seismometer and land data collected during the Los Angeles Region Seismic Experiment along two marine survey lines. Details of our image include a high-velocity zone under the Catalina Ridge, but a smooth gradient zone between. Catalina Ridge and San Clemente Ridge. The Moho depth is about 22 km with lateral variations. Copyright 1998 by the American Geophysical Union.

Journal of Geophysical Research B: Solid Earth

Total Petroleum Systems of the Northwest Shelf, Australia: The Dingo-Mungaroo/Barrow and the Locker-Mungaroo/Barrow

The Northwest Shelf Province (U.S.G.S. #3948) of Australia contains two important hydrocarbon source-rock intervals and numerous high quality reservoir intervals. These are grouped into two petroleum systems, Dingo-Mungaroo/Barrow and Locker-Mungaroo/Barrow, where the Triassic Mungaroo Formation and the Early Cretaceous Barrow Group serve as the major reservoir rocks for the Jurassic Dingo Claystone and Triassic Locker Shale source rocks. The primary source rock, Dingo Claystone, was deposited in restricted marine conditions during the Jurassic subsidence of a regional sub-basin trend. The secondary source rock, Locker Shale, was deposited in terrestrially-influenced, continental seaway conditions during the Early Triassic at the beginning of the breakup of Pangea. These systems share potential reservoir rocks of deep-water, proximal and distal deltaic, marginal marine, and alluvial origins, ranging in age from Late Triassic through Cretaceous. Interformational seals and the regional seal, Muderong Shale, along with structural and stratigraphic traps account for the many types of hydrocarbon accumulations in this province. In 1995, the Northwest Shelf produced 42% of the hydrocarbon liquids in Australia, and in 1996 surpassed the Australian Bass Straits production, with 275,000 barrels per day (bpd) average. This region is the major producing province of Australia. Known reserves as of 1995 are estimated at 11.6 billion of barrels of oil equivalent (BBOE)(Klett and others, 1997) . Although exploration has been conducted since 1955, many types of prospects have not been targeted and major reserves continue to be discovered.

Open-File Report

Soda Lake-Painted Rock(!) Petroleum System in the Cuyama Basin, California, U.S.A.

The Cuyama basin, located in the central California Coast Ranges, was formed by extension during early Miocene time and was filled with a variety of nonmarine, marginal marine, and neritic to bathyal marine sediments. Low sulfur oil is produced primarily from the lower Miocene Painted Rock Sandstone Member of the Vaqueros Formation along a structural trend parallel to the Russell fault, which was active from 23 to 5 Ma. A major fold and thrust belt beginning about 3 Ma formed the Caliente and Sierra Madre ranges and partially obscures the Miocene extensional basin. Stable carbon isotope and biomarker data indicate that the lower Miocene Soda Lake Shale Member of the Vaqueros Formation is the predominant source rock for the oil in the Cuyama area. Burial and thermal history modeling shows that oil generation began in middle-late Miocene time and that oil migrated into existing traps. Younger traps that formed in the overthrust are barren of oil because migration occurred prior to the development of the fold and thrust belt or because subthrust oil was unable to migrate into the overthrust.

Book chapter

Insight 4. Climate change and biodiversity loss amplify each other

Key messages: • Climate change is impacting biodiversity from local to global scales, and growing evidence suggests that further loss of biodiversity can contribute to climate change, creating a destabilizing feedback. • Loss of plant diversity due to climate and land-use change can weaken ecosystem functioning, leading to a decrease in biomass accumulation and reduced carbon storage. • Animal biodiversity, both terrestrial and marine, plays a key role in regulating carbon storage through trophic chains and other plant-animal interactions that can alter vegetation structure and composition, affecting biomass accumulation and carbon sequestration. • Natural climate solution initiatives that integrate aspects of ecosystem integrity and species composition, rather than focusing solely on land cover area, can more effectively safeguard the carbon sink function.

Book chapter

Collision structures of the Prince William terrane and Chugach terrane docking along the Shumagin and Unimak convergent margins, Alaska, USA

Western Alaska’s convergent margins are composed of tectonostratigraphic terranes. On land, terrane assembly is recognized along boundaries or sutures between neighboring geologic elements with distinctly different origins. In marine areas where rock outcrops are covered by sediment, recognizing terrane sutures is problematic. A fault in seismic dip line 5 of the ALEUT project has been interpreted as a terrane suture. It is imaged intermittently down to the 30+-km-deep plate interface. Processing of ALEUT strike line 7 revealed the suture at ~18 km depths extending 300 km along the margin. Upper structures in line 5 are like the structures of adjacent seismic transects where imaging is only 8−10 km deep. They were previously not recognized as the upper reaches of terrane sutures and show structural details obscured at greater depths. The composite data are the basis for a simple tectonic model of terrane docking.

Alaska

Facies analysis of the lower cycles of the Mesaverde Group (Upper Cretaceous) in northwestern Colorado

The uppermost 180 m of the Mancos Shale and overlying 390 m of the Iles Formation of the Mesaverde Group in northwestern Colorado were deposited at the west margin of an epicontinental seaway that spanned North America 66-98 million years ago from the circumboreal seaway on the north to the Gulf of Mexico on the south. Sedimentation in the seaway was controlled by uplift in source areas to the west, subsidence in the basin, and eustatic sea level changes. Sedimentation rates were relatively high, averaging about 220m/million years; marine cycles of deposition occurred in northwestern Colorado that correspond to the Claggett, Judith River, and Bearpaw regressions of Montana. The upper Mancos shale and lower Iles Formation can be subdivided into ten facies based on five criteria: (1) Lithology, texture, and thickness relations (geometry); (2) sedimentary structures and contacts; (3) trace and body fossils; (4) paleocurrent data; and (5) adjoining facies (underlying, overlying, and laterally). Each facies has distinct attributes which characterize a specific depositional environment. Environments represented by facies include (A) offshore shoreface transition (prodelta); (B) shallow marine sand bars; (C) destructional delta front; (D) constructional delta front (sheet sands and mouth bars); (E) beach foreshore-shoreface deposits; (F) interdistributary marsh and swamp deposits and fluvial floodplain; (G) distributary channels; (H) crevasse splays; (J) fluvial streams; and (K) tidally influenced distributary channel. Facies analysis of outcrop data shows that transgressions and regressions occurred, some of which are related to major (eustatic) sea level changes and others that reflect only local causes. These events in northwestern Colorado are summarized in following chapters, and an attempt is made to show their relationship to broad regional patterns of sedimentation.

Open-File Report

Cenozoic stratigraphy and structure of the Chesapeake Bay region

The Salisbury embayment is a broad tectonic downwarp that is filled by generally seaward-thickening, wedge-shaped deposits of the central Atlantic Coastal Plain. Our two-day field trip will take us to the western side of this embayment from the Fall Zone in Washington, D.C., to some of the bluffs along Aquia Creek and the Potomac River in Virginia, and then to the Calvert Cliffs on the western shore of the Chesapeake Bay. We will see fluvial-deltaic Cretaceous deposits of the Potomac Formation. We will then focus on Cenozoic marine deposits. Transgressive and highstand deposits are stacked upon each other with unconformities separating them; rarely are regressive or lowstand deposits preserved. The Paleocene and Eocene shallow shelf deposits consist of glauconitic, silty sands that contain varying amounts of marine shells. The Miocene shallow shelf deposits consist of diatomaceous silts and silty and shelly sands. The lithology, thickness, dip, preservation, and distribution of the succession of coastal plain sediments that were deposited in our field-trip area are, to a great extent, structurally controlled. Surficial and subsurface mapping using numerous continuous cores, auger holes, water-well data, and seismic surveys has documented some folds and numerous high-angle reverse and normal faults that offset Cretaceous and Cenozoic deposits. Many of these structures are rooted in early Mesozoic and/or Paleozoic NE-trending regional tectonic fault systems that underlie the Atlantic Coastal Plain. On Day 1, we will focus on two fault systems (stops 1–2; Stafford fault system and the Skinkers Neck–Brandywine fault system and their constituent fault zones and faults). We will then see (stops 3–5) a few of the remaining exposures of largely unlithified marine Paleocene and Eocene strata along the Virginia side of the Potomac River including the Paleocene-Eocene Thermal Maximum boundary clay. These exposures are capped by fluvial-estuarine Pleistocene terrace deposits. On Day 2, we will see (stops 6–9) the classic Miocene section along the ~25 miles (~40 km) of Calvert Cliffs in Maryland, including a possible fault and structural warping. Cores from nearby test holes will also be shown to supplement outcrops.

Chesapeake Bay