Search USGS⌕ Search

SEARCH · Search USGS

Results for “International Geophysics”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14Linked to original sources
USGS2024

Revisiting geophysical interpretations of the Midcontinent Rift below Lake Superior— Insights from GLIMPCE seismic-reflection line C

The 1.1 Ga Midcontinent Rift System (MRS) has been investigated in the Lake Superior region for more than a century. The most influential geophysical data for modern paradigms has come from seismic-reflection profiles collected by the Great Lakes International Multidisciplinary Program on Crustal Evolution (GLIMPCE) in the late 1980s. We are revisiting seismic-reflection GLIMPCE line C by constructing a detailed velocity model for conversion of the seismic data measured in two-way travel time to a section plotted versus depth. Preliminary results from the velocity modeling, depth conversion, and ties to onshore geology have led to a significantly different view of Line C as primarily a sag basin rather than a half-graben. Narrow intervals of high-velocity material that emanate upwards along both sides of the sag basin are interpreted as mafic intrusions connected to the mantle. This new interpretation suggests that basin subsidence was the dominant process in the development of rift stage troughs rather than major half-graben structures.

Conference Paper↗
USGS1980

Driving- stress waveform and the determination of rock internal friction by the stress-strain curve method.

Harmonic distortion in the stress-time function applied to rock specimens affects the measurement of rock internal friction in the seismic wave periods by the stress-strain hysteresis loop method. If neglected, the harmonic distortion can cause measurements of rock internal friction to be in error by 3O% in the linear range. The stress-time function therefore must be recorded and Fourier analysed for correct interpretation of the experimental data. Such a procedure would also yield a value for internal friction at the higher harmonic frequencies.-Author

Geophysical Journal of the Royal Astronomical Soci↗
USGS2011

Geophysical data collected from the St. Clair River between Michigan and Ontario, Canada (2008-016-FA)

In 2008, the U.S. Geological Survey (USGS), Woods Hole Coastal and Marine Science Center (WHCMSC), in cooperation with the U.S. Army Corps of Engineers conducted a geophysical and sampling survey of the riverbed of the Upper St. Clair River between Port Huron, Mich., and Sarnia, Ontario, Canada. The objectives were to define the Quaternary geologic framework of the riverbed of the St. Clair River to evaluate the relationship between morphologic change of the riverbed and underlying stratigraphy. This report presents the geophysical and sample data collected from the St. Clair River, May 29-June 6, 2008, as part of the International Upper Great Lakes Study, a 5-year project funded by the International Joint Commission of the United States and Canada to examine whether physical changes in the St. Clair River are affecting water levels within upper Great Lakes, to assess regulation plans for outflows from Lake Superior, and to examine the potential effect of climate change on the Great Lakes water levels (http://www.iugls.org). This document makes available the data that were used in a separate report, U.S. Geological Survey Open-File Report 2009-1137, which detailed the interpretations of the Quaternary geologic framework of the region. This report includes a description of the high-resolution acoustic and sediment-sampling systems that were used to map the morphology, surficial sediment distribution, and underlying geology of the Upper St. Clair River during USGS field activity 2008-016-FA (http://quashnet.er.usgs.gov/cgi-bin/datasource/public_ds_info.pl?fa=2008-016-FA). Video and photographs of the riverbed were also collected and are included in this data release. Future analyses will be focused on substrate erosion and its effects on river-channel morphology and geometry. Ultimately, the International Upper Great Lakes Study will attempt to determine where physical changes in the St. Clair River affect water flow and, subsequently, water levels in the Upper Great Lakes.

Open-File Report↗
USGS2011

Deep scientific drilling in the San Andreas Fault Zone

A deep scientific drilling experiment in San Andreas fault zone would provide data essential to understanding the structure, composition, mechanical behavior, and physical state of an active, major plate-boundary fault. Toward this end, we are working with an international team of scientists and engineers to propose a long-term, integrated program of surface-based geological and geophysical investigations and deep drilling along the San Andreas fault system. Prior to drilling, a suite of comparative geodynamic models will be developed incorporating detailed investigations of geology, crustal structure, geophysical environment, hydrology, seismotectonics, and fault-movement history at each of the candidate sites. These studies will have a major impact on our understanding of the structure and physical properties of the San Andreas fault system and will form a critical framework for applying the knowledge gained in a deep San Andreas borehole to other segments of the fault and other tectonic environments.

California, Nevada↗
USGS2003

Antarctic Climate Evolution (ACE) Research Initiative

The Antarctic Climate Evolution (ACE) project is a new international research initiative to study the climate and glacial history of Antarctica by linking climate and ice sheet modeling studies with geophysical surveys and geological studies on and around the Antarctic continent (Fig. 1). The rationale for the ACE programme, outlined herein, was developed and refined, before, during and after the Antarctic Earth Science Symposium in Erice, Italy, in September 2001 (Cooper et al., 2002, Florindo et al., 2003).

Terra Antarctica↗
USGS2010

Proceedings of the 25th Himalaya-Karakoram-Tibet Workshop

For a quarter of a century the Himalayan-Karakoram-Tibet (HKT) Workshop has provided scientists studying the India-Asia collision system a wonderful opportunity for workshop-style discussion with colleagues working in this region. In 2010, HKT returns to North America for the first time since 1996. The 25th international workshop is held from June 7 to10 at San Francisco State University, California. The international community was invited to contribute scientific papers to the workshop, on all aspects of geoscience research in the geographic area of the Tibetan Plateau and its bounding ranges and basins, from basic mapping to geochemical and isotopic analyses to large-scale geophysical imaging experiments. In recognition of the involvement of U.S. Geological Survey (USGS) scientists in a wide range of these activities, the USGS agreed to publish the extended abstracts of the numerous components of HKT-25 as an online Open-File Report, thereby ensuring the wide availability and distribution of these abstracts, particularly in the HKT countries from which many active workers are precluded by cost from attending international meetings. In addition to the workshop characterized by contributed presentations, participants were invited to attend a pre-meeting field trip from the Coast Ranges to the Sierra Nevada, to allow the international group to consider how the tectonic elements of the Pacific margin compare to those of the Himalayan belt. Following the workshop, the National Science Foundation (NSF) sponsored a workshop on the 'Future directions for NSF-sponsored geoscience research in the Himalaya/Tibet' intended to provide NSF Program Directors with a clear statement and vision of community goals for the future, including the scientific progress we can expect if NSF continues its support of projects in this geographic region, and to identify which key geoscience problems and processes are best addressed in the Himalaya and Tibet, what key datasets are needed, and how NSF can best support the evolving need for interdisciplinary investigations. This workshop also has clear societal relevance. Recent earthquakes have brought international attention to active tectonics and earthquake hazards in the HKT region. Prominent examples include the Mw 7.8 Kokoxili (Qinghai, China) earthquake of 2001, the Mw 7.6 Kashmir (Pakistan) earthquake of 2005, the Mw 7.9 Wenchuan (Sichuan, China) earthquake of 2008, and this year the Mw 6.9 Yushu (Qinghai, China) earthquake. Geological and geophysical field work conducted both before these earthquakes, as well as in response to them, has helped to define the active faults and regional tectonics in the HKT region. The research presented at this workshop provides the framework necessary for improved seismic hazard assessments in this region. The organizers gratefully acknowledge the support of NSF's Continental Dynamics Program and its Office of International Science and Engineering, through award EAR-0965796. We thank San Francisco State University's Sheldon Axler, Dean of the College of Science and Engineering, and Toby Garfield, Director of the Romberg Tiburon Center, for use of their conference facilities; and the Department of Geosciences, particularly Deb Shulman and Miriam Knof, for administrative support. The California Academy of Sciences generously hosted a reception for visiting delegates, and Brad Ritts (Chevron Exploration Technology Company), Todd Greene (California State University, Chico) and John Shervais (Utah State University) together co-led the pre-conference field trip. Technical editing of this volume was led by Roxanne Renedo (U.S. Geological Survey) with assistance from Margaret Milia (Stanford University). We are grateful to the U.S. Geological Survey (USGS) Earthquake Hazards Program and the USGS Menlo Park (California) Publishing Service Center for making this online report possible.

Open-File Report↗
USGS2024

A journey to the center of the USGS National Strong-motion Project processing and beyond

The United States Geological Survey (USGS) National Strong Motion Project (NSMP) has the primary U.S. government responsibility to acquire, process, and disseminate significant strong-motion earthquake ground motion records measured at surficial free-field stations, structures (buildings, dams, and bridges, and geotechnical arrays to the earthquake engineering community. As a result of the deployment of modern seismic instrumentation and growth of tools such as web-services, earthquake data from U.S. and international seismic networks are more accessible than ever. Our mission is to provide raw and processed strong-motion waveforms with PGA values greater than 0.1%g for M3.0 earthquakes and larger in California and M4.0 and larger within the conterminous US, Hawaii, Puerto Rico, and Alaska. Datasets of interest to the engineering and geophysics communities, such as event sequences in areas of induced seismicity and significant global events, are also processed and posted at the Center for Engineering Strong Motion Data (CESMD) at strongmotioncenter.org when available through collaboration with the international strong-motion data community. Here we outline (1) the NSMP’s current workflow to acquire, process, and distribute data at CESMD; (2) our new endeavours and collaborations focusing on comparison and integration of waveform processing software, development of techniques for metadata quality checks before and after earthquakes, and construction of a dynamic site characterization repository; and (3) our topics for possible collaboration topics across the global strong-motion community.

Conference Paper↗
USGS2006

Growth and collapse of Hawaiian volcanoes

This special issue is an outgrowth of a session of the same name held at the 2003 Fall Meeting of the American Geophysical Union (AGU) in San Francisco. The session served dual purposes: to highlight recent advances in our understanding of the development and internal structure of Hawaiian volcanoes, and to recognize the important contributions of James Moore to this field of study.

Hawai'i↗
USGS2010

Western Mineral and Environmental Resources Science Center--providing comprehensive earth science for complex societal issues

Minerals in the environment and products manufactured from mineral materials are all around us and we use and come into contact with them every day. They impact our way of life and the health of all that lives. Minerals are critical to the Nation's economy and knowing where future mineral resources will come from is important for sustaining the Nation's economy and national security. The U.S. Geological Survey (USGS) Mineral Resources Program (MRP) provides scientific information for objective resource assessments and unbiased research results on mineral resource potential, production and consumption statistics, as well as environmental consequences of mining. The MRP conducts this research to provide information needed for land planners and decisionmakers about where mineral commodities are known and suspected in the earth's crust and about the environmental consequences of extracting those commodities. As part of the MRP scientists of the Western Mineral and Environmental Resources Science Center (WMERSC or 'Center' herein) coordinate the development of national, geologic, geochemical, geophysical, and mineral-resource databases and the migration of existing databases to standard models and formats that are available to both internal and external users. The unique expertise developed by Center scientists over many decades in response to mineral-resource-related issues is now in great demand to support applications such as public health research and remediation of environmental hazards that result from mining and mining-related activities. Western Mineral and Environmental Resources Science Center Results of WMERSC research provide timely and unbiased analyses of minerals and inorganic materials to (1) improve stewardship of public lands and resources; (2) support national and international economic and security policies; (3) sustain prosperity and improve our quality of life; and (4) protect and improve public health, safety, and environmental quality. The MRP supports approximately 40 USGS research specialists who utilize cooperative agreements with universities, industry, and other governmental agencies to support their collaborative research and information exchange. Scientists of the WMERSC study how and where non-fuel mineral resources form and are concentrated in the earth's crust, where mineral resources might be found in the future, and how mineral materials interact with the environment to affect human and ecosystem health. Natural systems (ecosystems) are complex - our understanding of how ecosystems operate requires collecting and synthesizing large amounts of geologic, geochemical, biologic, hydrologic, and meteorological information. Scientists in the Center strive to understand the interplay of various processes and how they affect the structure, composition, and health of ecosystems. Such understanding, which is then summarized in publicly available reports, is used to address and solve a wide variety of issues that are important to society and the economy. WMERSC scientists have extensive national and international experience in these scientific specialties and capabilities - they have collaborated with many Federal, State, and local agencies; with various private sector organizations; as well as with foreign countries and organizations. Nearly every scientific and societal challenge requires a different combination of scientific skills and capabilities. With their breadth of scientific specialties and capabilities, the scientists of the WMERSC can provide scientifically sound approaches to a wide range of societal challenges and issues. The following sections describe examples of important issues that have been addressed by scientists in the Center, the methods employed, and the relevant conclusions. New directions are inevitable as societal needs change over time. Scientists of the WMERSC have a diverse set of skills and capabilities and are proficient in the collection and integration of

Circular↗
USGS2018

Leveraging geodetic data to reduce losses from earthquakes

Seismic hazard assessments that are based on a variety of data and the best available science, coupled with rapid synthesis of real-time information from continuous monitoring networks to guide post-earthquake response, form a solid foundation for effective earthquake loss reduction. With this in mind, the Earthquake Hazards Program (EHP) of the U.S. Geological Survey (USGS) Natural Hazards Mission Area (NHMA) engages in a variety of undertakings, both established and emergent, in order to provide high quality products that enable stakeholders to take action in advance of and in response to earthquakes. Examples include the National Seismic Hazard Model (NSHM), development of tools for improved situational awareness such as earthquake early warning (EEW) and operational earthquake forecasting (OEF), research about induced seismicity, and new efforts to advance comprehensive subduction zone science and monitoring. Geodetic observations provide unique and complementary information directly relevant to advancing many aspects of these efforts (fig. 1). EHP scientists have long leveraged geodetic data for a range of influential studies, and they continue to develop innovative observation and analysis methods that push the boundaries of the field of geodesy as applied to natural hazards research. Given the ongoing, rapid improvement in availability, variety, and precision of geodetic measurements, considering ways to fully utilize this observational resource for earthquake loss reduction is timely and essential. This report presents strategies, and the underlying scientific rationale, by which the EHP could achieve the following outcomes: The EHP is an authoritative source for the interpretation of geodetic data and its use for earthquake loss reduction throughout the United States and its territories. The USGS consistently provides timely, high quality geodetic data to stakeholders. Significant earthquakes are better characterized by incorporating geodetic data into USGS event response products and by expanded use of geodetic imaging data to assess fault rupture and source parameters. Uncertainties in the NSHM, and in regional earthquake models, are reduced by fully incorporating geodetic data into earthquake probability calculations. Geodetic networks and data are integrated into the operations and earthquake information products of the Advanced National Seismic System (ANSS). Earthquake early warnings are improved by more rapidly assessing ground displacement and the dynamic faulting process for the largest earthquakes using real-time geodetic data. Methodology for probabilistic earthquake forecasting is refined by including geodetic data when calculating evolving moment release during aftershock sequences and by better understanding the implications of transient deformation for earthquake likelihood. A geodesy program that encompasses a balanced mix of activities to sustain missioncritical capabilities, grows new competencies through the continuum of fundamental to applied research, and ensures sufficient resources for these endeavors provides a foundation by which the EHP can be a leader in the application of geodesy to earthquake science. With this in mind the following objectives provide a framework to guide EHP efforts: Fully utilize geodetic information to improve key products, such as the NSHM and EEW, and to address new ventures like the USGS Subduction Zone Science Plan. Expand the variety, accuracy, and timeliness of post-earthquake information products, such as PAGER (Prompt Assessment of Global Earthquakes for Response), through incorporation of geodetic observations. Determine if geodetic measurements of transient deformation can significantly improve estimates of earthquake probability. Maintain an observational strategy aligned with the target outcomes of this document that includes continuous monitoring, recording of ephemeral observations, focused data collection for use in research, and application-driven data processing and analysis systems. Collaborate on research, development, and operation of affordable, high-precision seafloor geodetic methods that improve earthquake forecasting and event response. Advance computational techniques and instrumentation to enable use of strategies like repeat-pass imagery and low-cost geodetic sensors for earthquake response, monitoring, and research. Engage stakeholders and collaborate with partner institutions to foster operational and research objectives and to safeguard the continued health of geodetic infrastructure upon which we mutually depend. Maintaining a vibrant internal research program provides the foundation by which the EHP can remain an effective and trusted source for earthquake science. Exploiting abundant new data sources, evaluating and assimilating the latest science, and pursuing novel avenues of investigation are means to fulfilling the EHP’s core responsibilities and realizing the important scientific advances envisioned by its scientists. Central to the success of such a research program is engaging personnel with a breadth of competencies and a willingness and ability to adapt these to the program’s evolving priorities, enabling current staff to expand their skills and responsibilities, and planning holistically to meet shared workforce needs. In parallel, collaboration with external partners to support scientific investigations that complement ongoing internal research enables the EHP to strengthen earthquake information products by incorporating alternative perspectives and approaches and to study topics and geographic regions that cannot be adequately covered internally. With commensurate support from technical staff who possess diverse skills, including engineering, information technology, and proficiency in quantitative analysis combined with basic geophysical knowledge, the EHP can achieve the geodetic outcomes identified in this document.

Open-File Report↗
USGS1970

Annotated bibliography on artificial recharge of ground water, 1955-67

Artificial ground-water recharge has become more important as water use by agriculture, industry, and municipalities increases. Water management agencies are increasingly interested in potential use of recharge for pollution abatement, waste-water disposal, and re-use and reclamation of locally available supplies. Research projects and theoretical analyses of operational recharge systems show increased scientific emphasis on the practice. Overall ground-water basin management systems generally now contain considerations of artificial recharge, whether by direct or indirect methods. Artificial ground-water recharge is a means of conserving surface runoff for future use in places where it would otherwise be lost, of protecting ground-water basins from salt-water encroachment along coastal areas, and of storing and distributing imported water. The biblio-graphy emphasizes technology; however, annotations of articles on waste-water reclamation, ground-water management and ground-water basin management are included. Subjects closely related to artificial recharge, including colloidal flow through porous media, field or laboratory instrumentation, and waste disposal by deep well injection are included where they specifically relate to potential recharge problems. Where almost the same material has been published in several journals, all references are included on the assumption that some publications may be more readily available to interested persons than others. Other publications, especially those of foreign literature, provided abstracts that were used freely as time limitations precluded obtaining and annotating all materials. Abstracts taken from published sources are noted. These are: "Abstracts of North American Geology," U.S. Department of the Interior, Geological Survey; "Abstracts of Recent Published Material on Foil and Water Conservation," ARS-41 series, Agricultural F.esearch Service, U.S. Department of Agriculture; "Water and1 Water Engineering," published by Fuel and Metallurgical Journals, Ltd., London, England; "Journal of Geophysical Research," American Geophysical Union, Washington, D.C.; "American Society of Civil Engineers Transactions," New York; "Selected Bibliography of Hydrology, United Kingdom, for the Years 1955-59," International Association of Scientific Hydrology; "Water Wells, an Annotated Bibliography," California University Water Resources Center Archives Report 13; "Re-use of Effluent in the Future With an Annotated Bibliography," by G. A. Whetstone, Texas Water Development Board Report 8, Austin, Tex.; "Journal of Water Pollution Control Federation," Washington, D.C.; and "A List of Selected Technical References on Artificial Recharge of Ground-Water Reservoirs," compiled by Roy W. Graves, Tulsa University, Information Services Department, Tulsa, Okla. Other notations are self-explanatory, and initials are those of the authors (DCS, DJG, WK). An unpublished compilation of recharge references by Arnon Arad sponsored by the United Nations Educational, Scientific, and Cultural Organization during a training period with the U.S. Geological Survey was also used. The bibliography is arranged alphabetically by author. Where an author has more than one publication, the arrangement is chronological; where an author has more than one publication in a given year, a, b, c, . . . are added. The indexing is by subject and geographic location. Each article was assigned the key words or phrases to best characterize its contents. Units of measure are as they were in the original article; abbreviations retained are generally those in common use such as mg/1 (milligrams per liter), ppm (parts per million), gpm (gallons per minute), km (kilometers), m (meters), cu m per hr (cubic meters p^r hour), cfs (cubic feet per second), me/1 (milliequivalents per liter), psi (pounds per square inch), BOD (biochemical oxygen demand), sq m (square meters), gpd (gallons per day), and mgd (million gallons per day). The bibliography was prepared because of the worldwide interest in the field of artificial recharge and the need for a single source of references to the literature published since 1954. The work is a sequel to the "Annotated Bibliography on Artificial Recharge of Ground Water Through 1954," by D. K. Todd, U.S. Geological Survey Water-Supply Paper 1477, published in 1959.

Water Supply Paper↗
USGS2002

Sediment-hosted contaminants and distribution patterns in the Mississippi and Atchafalaya River Deltas

The Mississippi and Atchafalaya Rivers transport very large amounts of bedload and suspended sediments to the deltaic and coastal environments of the northern Gulf of Mexico. Absorbed onto these sediments are contaminants that may be detrimental to the environment. To adequately assess the impact of these contaminants it is first necessary to develop an understanding of sediment distribution patterns in these deltaic systems. The distribution patterns are defined by deltaic progradational cycles. Once these patterns are identified, the natural and industrial contaminant inventories and their depositional histories can be reconstructed. Delta progradation is a function of sediment discharge, as well as channel and receiving-basin dimensions. Fluvial energy controls the sediment distribution pattern, resulting in a coarse grained or sandy framework, infilled with finer grained material occupying the overbank, interdistributary bays, wetlands and abandoned channels. It has been shown that these fine-grained sediments can carry contaminants through absorption and intern them in the sediment column or redistribute them depending on progradation or degradation of the delta deposit. Sediment distribution patterns in delta complexes can be determined through high-resolution geophysical surveys and groundtruthed with direct sampling. In the Atchafalaya and Mississippi deltas, remote sensing using High-Resolution Single-Channel Seismic Profiling (HRSP) and Sidescan Sonar was correlated to 20-ft vibracores to develop a near-surface geologic framework that identifies variability in recent sediment distribution patterns. The surveys identified bedload sand waves, abandoned-channel back-fill, prodelta and distributary mouth bars within the most recently active portions of the deltas. These depositional features respond to changes in deltaic processes and through their response may intern or transport absorbed contaminants. Characterizing these features provides insight into the fate of sediment-hosted contaminants.

Louisiana↗
USGS2011

Effort explores 130 Million years of Antarctic paleoenvironment

Antarctic climate history has been dominated by events and turning points with causes that are poorly understood. To fill the gaps in our knowledges new effort is underway in the international geologic community to acquire and coordinate the circum‐Antarctic geologic data needed to derive and model paleoenvironments of the past 130 m.y. The effort, which focuses principally on using shallow (<100 m) stratigraphic drilling and coring to acquire the geologic data, is being led by the Antarctic Offshore Stratigraphy Project (ANTOSTRAT), a group that works under the aegis of the Scientific Committee on Antarctic Research (SCAR). About 40 scientists from 12 countries met this past summer in Wellington, New Zealand, at an ANTOSTRAT meeting to discuss strategies for implementing the desired paleoenvironmental field and modeling studies. The meeting was held in conjunction with the 8th International Symposium on Antarctic Earth Sciences.

Eos, Transactions, American Geophysical Union↗
USGS2012

Holocene faulting in the Bellingham forearc basin: Upper-plate deformation at the northern end of the Cascadia subduction zone

The northern Cascadia forearc takes up most of the strain transmitted northward via the Oregon Coast block from the northward-migrating Sierra Nevada block. The north-south contractional strain in the forearc manifests in upper-plate faults active during the Holocene, the northern-most components of which are faults within the Bellingham Basin. The Bellingham Basin is the northern of four basins of the actively deforming northern Cascadia forearc. A set of Holocene faults, Drayton Harbor, Birch Bay, and Sandy Point faults, occur within the Bellingham Basin and can be traced from onshore to offshore using a combination of aeromagnetic lineaments, paleoseismic investigations and scarps identified using LiDAR imagery. With the recognition of such Holocene faults, the northernmost margin of the actively deforming Cascadia forearc extends 60 km north of the previously recognized limit of Holocene forearc deformation. Although to date no Holocene faults are recognized at the northern boundary of the Bellingham Basin, which is 15 km north of the international border, there is no compelling tectonic reason to expect that Holocene faults are limited to south of the international border.

Washington↗
USGS1978

Intrusive rocks northeast of Steamboat Springs, Park Range, Colorado

Major Precambrian and minor Tertiary intrusive rocks northeast of Steamboat Springs in the Park Range between 40°30' and 40°45' N. lat. are described and compared with related rocks elsewhere in Colorado and Wyoming. The Precambrian intrusives were emplaced in a sequence of high-grade interlayered felsic gneisses, amphibolites, and pelitic schists of sedimentary and volcanic origin. These rocks are cut by a major northeast-trending Precambrian shear zone where mainly left lateral movement of 1/ 2 to 1 mile is certain. Cumulative movement of many miles is possible. The Precambrian intrusives consist of a batholith, the Mount Ethel pluton, a smaller Buffalo Pass pluton, and small dikes or lenses of fine-grained porphyry, pegmatites, and ultramafics. The Mount Ethel pluton is an oval shaped body 7 miles wide by about 40 miles long (shown by geophysical data to extend beneath younger sediments in North Park). Outer batholithic contacts are sharp and dip steeply outward at about 85°. Five mappable internal variants consist, in order of decreasing age, of granodiorite, quartz monzonite porphyry of Rocky Peak, quartz monzonite of Roxy Ann Lake, granite and quartz monzonite, and. leucogranite. Internal contacts between these plutonic variants are sharp, and evidence of liquid-solid relationships abounds; despite this, all rocks except the granodiorite contribute to an Rb-Sr whole-rock isochron indicating emplacement about 1.4 b.y. (billion years) ago. The most important variants volumetrically are: the quartz monzonite porphyry of Rocky Peak, which forms an irregular 2-mile-thick carapace or mapped band around the west edge of the pluton and is lithologically similar to nearby Sherman Granite, and the quartz monzonite of Roxy Ann Lake, which forms most of the rest of the pluton and is lithologically similar to Silver Plume Granite. An apparent Sherman -Silver Plume dichotomy with similar rock types and similar relative ages is noted throughout Colorado plutons of that age. The Buffalo Pass pluton consists of the quartz monzonite and gra- nodiorite augen gneiss of Buffalo Mountain and equigranular quartz monzonite gneiss. Internal contacts are not exposed. These rocks contribute to an Rb-Sr whole-rock isochron indicating syntectonic emplacement 1.7-1.8 b.y. ago, essentially the same as the metamorphism of the felsic gneiss wallrocks in the area of this report, and of rocks of Boulder Creek age elsewhere in Colorado. The fine-grained porphyry dikes cut the Buffalo Pass pluton, the ultramafics, and some pegmatites. The dikes are within the age range of the Mount Ethel pluton and are older than the mylonite and shear zones. They occur in both an older northwest-trending and a somewhat younger northeast-trending set but do not appear to change compositionally from one set to the other. Regional considerations indicate that they were emplaced between about 1.1 and 1.5 b.y. ago, a time when intermediate to mafic dikes were commonly emplaced throughout Colorado, Wyoming, and southwestern Montana. The pegmatite and ultramafic bodies are not dated directly, but clustering of many pegmatites outside the contacts of the Mount Ethel pluton may indicate a genetic relation of the pegmatites to the Mount Ethel rocks. Fluorite is a common accessory mineral in the rocks of the Mount Ethel pluton; it has not been observed in this area in the petrographically similar rocks of the Buffalo Pass pluton. Fluorite was precipitated most abundantly from the Precambrian magma that formed the quartz monzonite of Roxy Ann Lake. In 70 percent of these rocks fluorite is observed in amounts as great as 2 percent and is successively less abundant in both older and younger plutonic phases. Textural evidence indicates that, although most fluorite is intergrown with and contemporaneous with other magmatic minerals, some fluorite is associated with alteration minerals in a manner demonstrating its mobility since its initial deposition.

Colorado↗
USGS1996

Hydrogeology of structurally extended terrain in the eastern Great Basin of Nevada, Utah, and adjacent states, from geologic and geophysical models

The Great Basin of the western United States encompasses most of Nevada and western Utah (fig. 1). The climate of the region is semiarid to arid, with most precipitation falling as winter Show. The region is characterized by internal drainage (generally no hydrologic outlet to the ocean). Water resources in the region are limited and nearly all reliable surface-water sources have been allocated for use. The most commonly used aquifers arc sand-and-gravel basin-fill deposits in structural basins of the region. In many basins, pumpage from the basin-fill aquifers is as much as (or more than) the safe yield. Consequently, aquifers other than basin fill are being assessed in the eastern Great Basin to determine where and how much additional ground water is present and what might be the effects of development. This study was part of the Nevada Carbonate Aquifers Program, in cooperation with the State of Nevada, Las Vegas Valley Water District, City of North Las Vegas, and the Bureau of Reclamation. This atlas presents a conceptual model of the geologic and hydrologic features of structurally extended terrains in the eastern Great Basin. First, the model is described and major structural features are compared with regional groundwater flow patterns. Second, the validity of the conceptual hydrogeologic model is evaluated using geophysical data and geologic models derived from geophysical profiles.

Nevada;Utah↗
USGS2018

The U.S. Geological Survey’s Gas Hydrates Project

The Gas Hydrates Project at the U.S. Geological Survey (USGS) focuses on the study of methane hydrates in natural environments. The project is a collaboration between the USGS Energy Resources and the USGS Coastal and Marine Geology Programs and works closely with other U.S. Federal agencies, some State governments, outside research organizations, and international partners. The USGS studies the formation and distribution of gas hydrates in nature, the potential of hydrates as an energy resource, and the interaction between methane hydrates and the environment. The USGS Gas Hydrates Project carries out field programs and participates in drilling expeditions to study marine and terrestrial gas hydrates. USGS scientists also acquire new geophysical data and sample sediments, the water column, and the atmosphere in areas where gas hydrates occur. In addition, project personnel analyze datasets provided by partners and manage unique laboratories that supply state-of-the-art analytical capabilities to advance national and international priorities related to gas hydrates.

Fact Sheet↗