Search USGS⌕ Search

SEARCH · Search USGS

Results for “Ecological Engineering”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14Linked to original sources
USGS2015

Hydrology: The interdisciplinary science of water

We live in a world where biophysical and social processes are tightly coupled. Hydrologic systems change in response to a variety of natural and human forces such as climate variability and change, water use and water infrastructure, and land cover change. In turn, changes in hydrologic systems impact socioeconomic, ecological, and climate systems at a number of scales, leading to a coevolution of these interlinked systems. The Harvard Water Program, Hydrosociology, Integrated Water Resources Management, Ecohydrology, Hydromorphology, and Sociohydrology were all introduced to provide distinct, interdisciplinary perspectives on water problems to address the contemporary dynamics of human interaction with the hydrosphere and the evolution of the Earth’s hydrologic systems. Each of them addresses scientific, social, and engineering challenges related to how humans influence water systems and vice versa. There are now numerous examples in the literature of how holistic approaches can provide a structure and vision of the future of hydrology. We review selected examples, which taken together, describe the type of theoretical and applied integrated hydrologic analyses and associated curricular content required to address the societal issue of water resources sustainability. We describe a modern interdisciplinary science of hydrology needed to develop an in-depth understanding of the dynamics of the connectedness between human and natural systems and to determine effective solutions to resolve the complex water problems that the world faces today. Nearly, every theoretical hydrologic model introduced previously is in need of revision to accommodate how climate, land, vegetation, and socioeconomic factors interact, change, and evolve over time.

Water Resources Research↗
USGS2007

An Assessment of Hydrology, Fluvial Geomorphology, and Stream Ecology in the Cardwell Branch Watershed, Nebraska, 2003-04

An assessment of the 16.3-square-mile Cardwell Branch watershed characterized the hydrology, fluvial geomorphology, and stream ecology in 2003-04. The study - performed by the U.S. Geological Survey in cooperation with the City of Lincoln, Nebraska, and the Lower Platte South Natural Resources District - focused on the 7.7-square-mile drainage downstream from Yankee Hill Reservoir. Hydrologic and hydraulic models were developed using the Hydrologic Modeling System (HEC-HMS) and River Analysis System (HEC-RAS) of the U.S. Army Corps of Engineers Hydraulic Engineering Center. Estimates of streamflow and water-surface elevation were simulated for 24-hour-duration design rainstorms ranging from a 50-percent frequency to a 0.2-percent frequency. An initial HEC-HMS model was developed using the standardized parameter estimation techniques associated with the Soil Conservation Service curve number technique. An adjusted HEC-HMS model also was developed in which parameters were adjusted in order for the model output to better correspond to peak streamflows estimated from regional regression equations. Comparisons of peak streamflow from the two HEC-HMS models indicate that the initial HEC-HMS model may better agree with the regional regression equations for higher frequency storms, and the adjusted HEC-HMS model may perform more closely to regional regression equations for larger, rarer events. However, a lack of observed streamflow data, coupled with conflicting results from regional regression equations and local high-water marks, introduced considerable uncertainty into the model simulations. Using the HEC-RAS model to estimate water-surface elevations associated with the peak streamflow, the adjusted HEC-HMS model produced average increases in water-surface elevation of 0.2, 1.1, and 1.4 feet for the 50-, 1-, and 0.2-percent-frequency rainstorms, respectively, when compared to the initial HEC-HMS model. Cross-sectional surveys and field assessments conducted between November 2003 and March 2004 indicated that Cardwell Branch and its unnamed tributary appear to be undergoing incision (the process of downcutting) (with three locations showing 2 or more feet of streambed incision since 1978) that is somewhat moderated by the presence of grade controls and vegetation along the channel profile. Although streambank failures were commonly observed, 96 percent of the surveyed cross sections were classified as stable by planar and rotational failure analysis-a disconnect that may have been the result of assumed soil properties. Two process-based classification systems each indicated that the reaches within the study area were incising and widening, and the Rosgen classification system characterized the streams as either type E6 or B6c. E6 channels are hydraulically efficient with low width-depth ratios, low to moderate sinuosity, and gentle to moderately steep slopes. B6c channels typically are incised with low width-depth ratios maintained by riparian vegetation, low bedload transport, and high washload transport. No obvious nickpoints (interruption or break in slope) were observed in the thalweg profile (line of maximum streambed descent), and the most acute incision occurred immediately downstream from bridges and culverts. Nine water-quality samples were collected between August 2003 and November 2004 near the mouth of the watershed. Sediment-laden rainfall-runoff substantially affected the water quality in Cardwell Branch, leading to greater biochemical and chemical oxygen demands as well as increased concentrations of several nutrient, bacteriological, sediment, and pesticide constituents. The storage of rainfall runoff in Yankee Hill Reservoir may prolong the presence of runoff-related constituents downstream. Across the study area, there was a lack of habitat availability for aquatic biota because of low dissolved oxygen levels and low streamflows or dry channels. In August 2003, the aquatic community near the mouth of

Scientific Investigations Report↗
USGS2015

The Everglades Depth Estimation Network (EDEN) surface-water model, version 2

The Everglades Depth Estimation Network (EDEN) is an integrated network of water-level gages, interpolation models that generate daily water-level and water-depth data, and applications that compute derived hydrologic data across the freshwater part of the greater Everglades landscape. The U.S. Geological Survey Greater Everglades Priority Ecosystems Science provides support for EDEN in order for EDEN to provide quality-assured monitoring data for the U.S. Army Corps of Engineers Comprehensive Everglades Restoration Plan. The EDEN surface-water model, version 2 (V2), interpolates water-level data from a network of 240 gages to generate gridded daily water-level surfaces for the freshwater domain of the Everglades. When these spatiotemporal continuous surfaces are combined with EDEN’s digital elevation model of ground surface, derived hydrologic data provide scientists and water managers working in the Everglades with data necessary to analyze ecological and biotic responses to hydrologic changes in the Everglades. Derived datasets include water depth, recession rates, days since last dry, water-surface slopes, and hydroperiod. The V2 model includes enhancements from the previous model (version 1; V1) to accommodate changes in the water-level gage network, adjustments to water-level data, improved understanding of the flow dynamics (particularly near canals), and installation of an elevation benchmark network. Enhancements to the V2 model included Expansion of the EDEN domain: The model domain was expanded to include a part of southern Big Cypress National Preserve and northwestern Everglades National Park upstream of the marsh mangrove wetlands, thus completing the coastal connection along the southwestern boundary of the model; and Development of subdomain models: To account for insufficient water-control structure gage data at some subbasin boundaries, subdomain models were developed for five subdomains, and the resulting water-level surfaces were merged to generate the final water-level surface. Model performance statistics show a general improvement in the V2 model as compared to the V1 model. Overall, the root mean squared error (RMSE) was reduced by 2.42 centimeters (cm) to 4.68 cm. In Water Conservation Area 3A North and Water Conservation Area 3B, the RMSE was reduced by 10.88 and 9.15 cm, respectively. In addition to evaluating model performance statistics, 2-cm water-level maps were generated and evaluated for irregular contours that would indicate a potential problem either with data input or water-level estimates. Three applications of the EDEN-modeled water surfaces and other EDEN datasets are presented in the report to show how scientists and resource managers are using EDEN datasets to analyze biological and ecological responses to hydrologic changes in the Everglades. The biological responses of two important Everglades species, alligators and wading birds, to changes in hydrology are described. The effects of hydrology on fire dynamics in the Everglades are also discussed.

Florida↗
USGS2021

Improved fire severity mapping in the North American boreal forest using a hybrid composite method

Fire severity is a key driver shaping the ecological structure and function of North American boreal ecosystems, a biome dominated by large, high-intensity wildfires. Satellite-derived burn severity maps have been an important tool in these remote landscapes for both fire and resource management. The conventional methodology to produce satellite-inferred fire severity maps generally involves comparing imagery from 1 year before and 1 year after a fire, yet environmental conditions unique to the boreal have limited the accuracy of resulting products. We introduce an alternative method – the ‘hybrid composite’ – based on deriving mean severity over time on a per-pixel basis within the cloud-computing environment of Google Earth Engine. It constructs the post-fire image from satellite data composited from all valid images (i.e., clear-sky and snow-free) acquired in the time period immediately after fire through the early growing season of the following year. We compare this approach to paired-scene and composite approaches where the post-fire time period is from the growing season 1 year after fire. Validation statistics based on field-derived data for 52 fires across Alaska and Canada indicate that the hybrid composite method outperforms the other approaches. This approach presents an efficient and cost-effective means to monitor and explore trends and patterns across broad spatial domains, and could be applied to fires in other regions, especially those with frequent cloud cover or rapid vegetation recovery.

Alaska↗
USGS2018

Promoting synergy in the innovative use of environmental data—Workshop summary

From December 2 to 4, 2015, NatureServe and the U.S. Geological Survey organized and hosted a biodiversity and ecological informatics workshop at the U.S. Department of the Interior in Washington, D.C. The workshop objective was to identify user-driven future directions and areas of collaboration in advanced applications of environmental data applied to forecasting and decision making for the sustainability of biodiversity and ecosystem services. Substantial effort to recruit attendees from diverse Federal, State, and private sector organizations successfully attracted participants from 20 Federal agencies and 48 different institutions in the academic, nonprofit, State government, and commercial sectors; the total number of attendees ranged from 100 to 144 during the 3-day workshop. The first one-half of the workshop was divided into 7 plenary sessions and 3 sets of lightning talk sessions organized by sector, providing 48 oral and visual plenary presentations that shared diverse perspectives on biodiversity and ecological informatics, including original biospatial analyses from 6 graduate student map contest winners. The second one-half of the workshop focused on 10 breakout sessions with participant-driven themes from the environmental data sphere and concluded with an address by the Director of the U.S. Fish and Wildlife Service. The workshop was structured to encourage interactivity. About 80–90 percent of attendees provided direct feedback using clicker devices for specific questions related to biodiversity and ecological data uses and needs, and 10 breakout session leaders shared the highlights of their group discussions during the final workshop plenary sessions. Participants were encouraged to use the Twitter hashtag #ShareUrData. Over lunch on day 2 there were 20 simultaneous presentations of tools and apps during a special “Tools Café” session. The 10 participant-defined breakout session topics are listed below: Ecosystem services and ecological indicators Inventory and monitoring Biogeographic map of the Nation Pollinators Invasive species Remote sensing Drivers of agricultural change Citizen science Climate Hydrology and watersheds Numerous common themes that emerged from the workshop include the following: The vital importance of completing foundational environmental datasets that are nationally consistent and are essential to multiple sectors, such as the Soil Survey Geographic database high-resolution soils data, a minimum 5-meter resolution digital elevation model, national hydrographic data, high-resolution land cover data, time series high-resolution spatial climate data from historical to future time steps, and a national wetland inventory. Improved, nationally consistent environmental datasets (integrated with targeted observations) will dramatically advance forecasting capacity and support early warning systems (that is, drought, forest disease); however, multiagency coordination should focus on decision support tools that convey appropriate actions and responses to adapt to, and mitigate, potential negative consequences. Digitizing and providing access to the vast stores of underused historical data that can be leveraged for this purpose is of national importance. Modern computational techniques and the ever-increasing flow of environmental data from ground and remote observations can support improved understanding of environmental change. Success of understanding patterns of change for decision making requires establishing baselines from which change can be measured. The value of digitized historical data is greater than ever before. There is a need to recognize the multifaceted potential of citizen science to engage the public in resource stewardship, to create the next generation of science, technology, engineering, math, and environmental leaders, and to have sufficient field personnel to monitor environmental trends, including early detection of alien invasive species, phenological shifts, shifting distribution and abundance of indicator species, and species inventories. The Federal government has an essential role in creating the infrastructure to dramatically improve mobilization of citizen science (and other) data by fostering the following: creation of data standards, creation of nationally consistent framework datasets, vertical integration of observation data, visualization and dissemination of aggregated datasets, and calculation and communication of derived trends. Current and near future trends in the availability of remotely sensed data (rapid expansion of satellite fleets and drones) is revolutionizing access to near-real-time ecological data. Targeted integration with ground-based observations and instrumentation has an extremely valuable role in validating remotely sensed data, filling data gaps, improving data quality, and fully realizing the potential of the near-real-time monitoring of environmental indicator trends. Integrated management of environmental data at the landscape scale is required even as specific actions on the ground are largely local in nature. The workshop highlighted numerous success stories; however, almost every breakout group pointed out the still-too-fragmented nature of the current data landscape. Management and delivery of the necessary data, tools, and analyses to sustain our Nation’s environmental capital must be a collaborative effort between Federal, State, and local governments, academia, nonprofits, and the commercial sector, even though the responsibilities of each sector are different.

Open-File Report↗
USGS2017

Automated cropland mapping of continental Africa using Google Earth Engine cloud computing

The automation of agricultural mapping using satellite-derived remotely sensed data remains a challenge in Africa because of the heterogeneous and fragmental landscape, complex crop cycles, and limited access to local knowledge. Currently, consistent, continent-wide routine cropland mapping of Africa does not exist, with most studies focused either on certain portions of the continent or at most a one-time effort at mapping the continent at coarse resolution remote sensing. In this research, we addressed these limitations by applying an automated cropland mapping algorithm (ACMA) that captures extensive knowledge on the croplands of Africa available through: (a) ground-based training samples, (b) very high (sub-meter to five-meter) resolution imagery (VHRI), and (c) local knowledge captured during field visits and/or sourced from country reports and literature. The study used 16-day time-series of Moderate Resolution Imaging Spectroradiometer (MODIS) normalized difference vegetation index (NDVI) composited data at 250-m resolution for the entire African continent. Based on these data, the study first produced accurate reference cropland layers or RCLs (cropland extent/areas, irrigation versus rainfed, cropping intensities, crop dominance, and croplands versus cropland fallows) for the year 2014 that provided an overall accuracy of around 90% for crop extent in different agro-ecological zones (AEZs). The RCLs for the year 2014 (RCL2014) were then used in the development of the ACMA algorithm to create ACMA-derived cropland layers for 2014 (ACL2014). ACL2014 when compared pixel-by-pixel with the RCL2014 had an overall similarity greater than 95%. Based on the ACL2014, the African continent had 296 Mha of net cropland areas (260 Mha cultivated plus 36 Mha fallows) and 330 Mha of gross cropland areas. Of the 260 Mha of net cropland areas cultivated during 2014, 90.6% (236 Mha) was rainfed and just 9.4% (24 Mha) was irrigated. Africa has about 15% of the world’s population, but only about 6% of world’s irrigation. Net cropland area distribution was 95 Mha during season 1, 117 Mha during season 2, and 84 Mha continuous. About 58% of the rainfed and 39% of the irrigated were single crops (net cropland area without cropland fallows) cropped during either season 1 (January-May) or season 2 (June-September). The ACMA algorithm was deployed on Google Earth Engine (GEE) cloud computing platform and applied on MODIS time-series data from 2003 through 2014 to obtain ACMA-derived cropland layers for these years (ACL2003 to ACL2014). The results indicated that over these twelve years, on average: (a) croplands increased by 1 Mha/yr, and (b) cropland fallows decreased by 1 Mha/year. Cropland areas computed from ACL2014 for the 55 African countries were largely underestimated when compared with an independent source of census-based cropland data, with a root-mean-square error (RMSE) of 3.5 Mha. ACMA demonstrated the ability to hind-cast (past years), now-cast (present year), and forecast (future years) cropland products using MODIS 250-m time-series data rapidly, but currently, insufficient reference data exist to rigorously report trends from these results.

ISPRS Journal of Photogrammetry and Remote Sensing↗
USGS2018

Synthesizing models useful for ecohydrology and ecohydraulic approaches: An emphasis on integrating models to address complex research questions

Ecohydrology combines empiricism, data analytics, and the integration of models to characterize linkages between ecological and hydrological processes. A challenge for practitioners is determining which models best generalizes heterogeneity in hydrological behaviour, including water fluxes across spatial and temporal scales, integrating environmental and socio‐economic activities to determine best watershed management practices and data requirements. We conducted a literature review and synthesis of hydrologic, hydraulic, water quality, and ecological models designed for solving interdisciplinary questions. We reviewed 1,275 papers and identified 178 models that have the capacity to answer an array of research questions about ecohydrology or ecohydraulics. Of these models, 43 were commonly applied due to their versatility, accessibility, user‐friendliness, and excellent user‐support. Forty‐one of 43 reviewed models were linked to at least 1 other model especially: Water Quality Analysis Simulation Program (linked to 21 other models), Soil and Water Assessment Tool (19), and Hydrologic Engineering Center's River Analysis System (15). However, model integration was still relatively infrequent. There was substantial variation in model applications, possibly an artefact of the regional focus of research questions, simplicity of use, quality of user‐support efforts, or a limited understanding of model applicability. Simply increasing the interoperability of model platforms, transformation of models to user‐friendly forms, increasing user‐support, defining the reliability and risk associated with model results, and increasing awareness of model applicability may promote increased use of models across subdisciplines. Nonetheless, the current availability of models allows an array of interdisciplinary questions to be addressed, and model choice relates to several factors including research objective, model complexity, ability to link to other models, and interface choice.

Ecohydrology↗
USGS2009

USGS Water Data for Washington

The U.S. Geological Survey (USGS) has been investigating the water resources of Washington State since the latter part of the 19th century. During this time, demand for water has evolved from primarily domestic and stock needs to the current complex requirements for public-water supplies, irrigation, power generation, navigation, ecological needs, and numerous other uses. Water-resource data collected by the USGS in Washington have been, or soon will be, published by the USGS Washington Water Science Center (WAWSC) in numerous data and interpretive reports. Most of these reports are available online at the WAWSC web page http://wa.water.usgs.gov/pubs/

Fact Sheet↗
USGS2017

Biological and ecological science for Montana—The Treasure State

Montana is rich in minerals, energy, and soils, as well as prairies, forests, mountains, rivers, lakes, fish, and wildlife. Many enterprises that drive the economy are based on natural resources, including tourism, hunting, fishing, agriculture, and energy development. The outdoor-recreation economy alone supports 64,000 Montana jobs and generates nearly \$6 billion each year in economic activity.

Montana↗
USGS1966

Water resources in the Everglades

Aerial photography is playing an important role in the evaluation of the water resources of the almost-inaccessible 1,400 square miles of Everglades in southern Florida. Color, infrared, and panchromatic photographs show salient features that permit evaluation of the overall water resources picture. The fresh water-salt water interface, drainage patterns, ecologic changes resulting from flood and drought, quantities of flow, and other hydrologic features are easily observed or measured from the photographs. Such data permit areal extension of very limited point observations of water resources data, and will assist in providing the necessary guidelines for decisions in water management in the Everglades.

Florida↗
USGS2016

Suspended-sediment concentrations, bedload, particle sizes, surrogate measurements, and annual sediment loads for selected sites in the lower Minnesota River Basin, water years 2011 through 2016

Accurate measurements of fluvial sediment are important for assessing stream ecological health, calculating flood levels, computing sediment budgets, and managing and protecting water resources. Sediment-enriched rivers in Minnesota are a concern among Federal, State, and local governments because turbidity and sediment-laden waters are the leading impairments and affect more than 6,000 miles of rivers in Minnesota. The suspended sediment in the lower Minnesota River is deleterious, contributing about 75 to 90 percent of the suspended sediment being deposited into Lake Pepin. The Saint Paul District of the U.S. Army Corps of Engineers and the Lower Minnesota River Watershed District collaborate to maintain a navigation channel on the lower 14.7 miles of the Minnesota River through scheduled dredging operations. The Minnesota Pollution Control Agency has adopted a sediment-reduction strategy to reduce sediment in the Minnesota River by 90 percent by 2040. The U.S. Geological Survey, in cooperation with the U.S. Army Corps of Engineers, the Minnesota Pollution Control Agency, and the Lower Minnesota River Watershed District, collected suspended-sediment, bedload, and particle-size samples at five sites in the lower Minnesota River Basin during water years 2011 through 2014 and surrogate measurements of acoustic backscatter at one of these sites on the lower Minnesota River during water years 2012 through 2016 to quantify sediment loads and improve understanding of sediment-transport relations. Annual sediment loads were computed for calendar years 2011 through 2014. Data collected from water years 2011 through 2014 indicated that two tributaries, Le Sueur River and High Island Creek, had the highest sediment yield and concentrations of suspended sediment. These tributaries also had greater stream gradients than the sites on the Minnesota River. Suspended fines were greater than suspended sand at all sites in the study area. The range of median particle sizes matched the range for stream gradients from greatest to smallest. Bedload ranged from 3 to 20 percent of the total load at the Le Sueur River, Minnesota River at Mankato, and High Island Creek and was less than 1 percent of the total load at the Minnesota River near Jordan and at Fort Snelling State Park. The reach of the Minnesota River between Mankato and Jordan is a major source of sediment, with the sediment yield at Jordan being two and a half times greater than at Mankato. Between Jordan and Fort Snelling, the sediment yield decreases substantially, which indicates that the Minnesota River in this reach is a sink for sediment. Surrogate measurements (acoustic backscatter) collected with suspended-sediment concentration data from water years 2012 through 2016 from the Minnesota River at Fort Snelling State Park indicated strong relations between the acoustic backscatter and suspended-sediment concentrations. These results point to the dynamic nature of sediment aggradation, degradation, and transport in the Minnesota River Basin. The analyses described in this report will improve the understanding of sediment-transport relations and sediment budgets in the Minnesota River Basin.

Minnesota↗
USGS1985

Effects of flood control alternatives on fish and wildlife resources of the Malheur-Harney lakes basin

Malheur Lake is the largest freshwater marsh in the western contiguous United States and is one of the main management units of the Malheur National Wildlife Refuge in southeastern Oregon. The marsh provides excellent waterfowl production habitat as well as vital migration habitats for birds in the Pacific flyway. Water shortages have typically been a problem in this semiarid area; however, record snowfalls and cool summers have recently caused Malheur Lake to rise to its highest level in recorded history. This has resulted in the loss of approximately 57,000 acres of important wildlife habitat as well as extensive flooding of local ranches, roads, and railroad lines. Because of the importance of the Refuge, any water management plan for the Malheur-Harney Lakes Basin needs to consider the impact of management alternatives on the hydrology of Malheur Lake. The facilitated modeling workshop described in this report was conducted January 14-18, 1985, under the joint sponsorship of the Portland Ecological Services Field Office and the Malheur National Wildlife Refuge, Region 1, U.S. Fish and Wildlife Service (FWS). The Portland Field Office is responsible for FWS reporting requirements on Federal water resource projects while the Refuge staff has management responsibility for much of the land affected by high water levels in the Malheur-Harney Lakes Basin. The primary objective of the workshop was to begin gathering and analyzing information concerning potential fish and wildlife impacts, needs, and opportunities associated with proposed U.S. Army Corps of Engineers (COE) flood control alternatives for Malheur Lake. The workshop was structured around the formulation of a computer model that would simulate the hydrologic effects of the various alternatives and any concommitant changes in vegetation communities and wildlife use patterns. The simulation model is composed of three connected submodels. The Hydrology submodel calculates changes in lake volume, elevation, and surface area, as well as changes in water quality, that result from the proposed water management projects (upstream storage, upstream diversions, drainage canals) and the no action alternative. The Vegetation submodel determines associated changes in the areal extent of wetland and upland vegetation communities. Finally, the Wildlife submodel calculates indices of abundance or habitat suitability for colonial nesting birds (great egret, double-crested cormorant, white-faced ibis), greater sandhill crane, diving ducks, tundra swan, dabbling ducks, and Canada goose based on hydrologic and vegetation conditions. The model represents the Malheur-Harney Lakes Basin, but provides water quantity and quality indicators associated with additional flows that might occur in the Malheur River Basin. Several management scenarios, representing various flood control alternatives and assumptions concerning future runoff, were run to analyze model behavior. Scenario results are not intended as an analysis of all potential management actions or assumptions concerning future runoff. Rather, they demonstrate the type of analysis that could be conducted if the model was sufficiently refined and tested. Early in a model development project, the process of building the model is usually of greater benefit than the model itself. The model building process stimulates interaction among agencies, assists in integrating existing information, and helps identify research needs. These benefits usually accrue even in the absence of real predictive power in the resulting model. This workshop initiated interaction among the primary State and Federal resource and development agencies in a nonadversarial forum. The exchange of information and expertise among agencies provided the FWS with the best information currently available for use in the Planning Aid Letter it will develop at the Reconnaissance state of the COE study. If the COE subsequently initiates a Feasability Study, this information will be refined further and will aid the FWS in preparing its Coordination Act Report on any flood control alternative proposed by the COE. The model building and testing process also helped identify model limitations and more general information needs that should be evaluated for further study prior to preparation of an FWS Coordination Act Report. Major needs associated with the Hydrology submodel include a more detailed representation of hydrologic units (separately consider Harney Lake, Mud Lake, and Malheur Lake or the three hydrological units within Malheur Lake, rather than a combined lake system) and explicitly representation of groundwater storage and discharge in water budget calculations. A better representation of the hydrological units will require more detailed topographic data for the basin, capacity-elevation and elevation-surface area curves for each unit, and better water flow data between the units. Additional water quality parameters and constraints on proposed canal operation due to conditions in the Malheur River might also be added. Key Vegetation submodel needs include fine-tuning existing vegetation relationships in the model and adding relationships to address the influence of historical conditions on vegetation development, effects of very rapid changes in lake level, effects of wildlife populations (e.g., carp, muskrat), responses of vegetation to habitat management actions (e.g, haying, grazing, burning), and better representation of sago pondweed dynamics. A complementary geographic information system might also be developed for spatial analyses. Major needs that should be evaluated for the Wildlife submodel include addition of other wildlife species that have important effects on habitat on the Refuge (e.g., carp, muskrat) and consideration of additional life-cycle requisites and controlling variable for species presently in the model. Some of these limitations could perhaps be overcome if historical data on habitat conditions were developed to use with historical data on wildlife populations.

Oregon↗
USGS2024

The use of conceptual ecological models to identify critical data and uncertainties to support numerical modeling: The northern Gulf of Mexico eastern oyster Crassostrea virginica example

Objective Increasing reliance on numerical simulation models to help inform management and restoration choices benefits from careful consideration of critical early steps in model development. Along the northern coast of the Gulf of Mexico, the eastern oyster Crassostrea virginica fulfills important ecological and economic roles. Using the eastern oyster as an example, we draw on several recent frameworks outlining best practices for model development and application for restoration, conservation, and management. Methods We identify priority model questions, outline a conceptual ecological model (CEM) to guide numerical model development, and use this framework to identify uncertainties and research needs. Result The CEM uses a nested design, identifying explicit vital rates, processes, attributes, and outcomes for the species (oysters), population, and metapopulation (i.e., network of populations) levels in response to drivers of species, population, and metapopulation changes and changing environmental factors. Most management actions related to oyster restoration and harvest affect population attributes directly, but many coastal management actions and changes (i.e., climate change and coastal and water resource engineering) impact environmental factors that alter vital rates and attributes of oysters, populations, and metapopulations. Conclusion Investment in studies targeting individual oyster‐ and population‐level multi‐stressor responses (filtration, respiration, growth, and reproduction) and improving hydrodynamic and environmental models targeting drivers that influence metapopulation vital rates and attributes (i.e., connectivity and substrate persistence) would contribute to reducing uncertainties. Development of numerical models covering the entire oyster life cycle and connectivity of populations using hydrodynamic models of current and predicted conditions to provide key abiotic and biotic factors influencing larval movement, recruitment, and on‐reef oyster vital rates would assist in balancing the goals of conservation, restoration, and fisheries management of this foundational estuarine species.

Marine and Coastal Fisheries: Dynamics, Management↗
USGS2007

An Assessment of the Potential Effects of Aquifer Storage and Recovery on Mercury Cycling in South Florida

Mercury contamination in the environment is a global concern, especially in areas with abundant wetlands, such as south Florida. As the causal factors of this concern improve, scientists find that many factors that do not necessarily affect mercury concentrations, such as flooding and drying cycles, or changes to carbon and sulfate loading, can profoundly affect net mercury toxicity. Especially important are ecological factors that alter the conversion of mercury to methylmercury, which is the most bioaccumulative and toxic form of mercury in the environment. Resource managers, therefore, need to be aware of possible deleterious affects to mercury toxicity that could result from land and water management decisions. Several aspects of the Comprehensive Everglades Restoration Plan (CERP), including the planned Aquifer Storage and Recovery (ASR) program, have the potential to affect the abundance of methylmercury. In response to these concerns, the U.S. Geological Survey and U.S. Army Corps of Engineers collaborated on a study to evaluate how the proposed ASR program may affect mercury cycling and toxicity. This project was conducted as an initial assessment of the possible effects of the CERP ASR program on mercury in the south Florida environment. A twofold approach was employed: field sampling and controlled laboratory benchmark experiments. The field sampling survey collected ground-water samples from the Floridan and surficial aquifer systems for the ASR program to determine existing levels of mercury and methylmercury. Laboratory experiments, on the other hand, were designed to determine how the injected surface water would interact with the aquifer during storage periods. Overall, very low levels of mercury and methylmercury (mean values of 0.41 and 0.07 nanograms per liter, respectively) were observed in ground-water samples collected from the Floridan and surficial aquifer systems. These results indicate that 'recovered water' from the CERP ASR program would not represent a significant additional direct load of mercury and methyl-mercury to ASR 'receiving waters'. Net production of methylmercury, however, can result from additions of sulfate or natural organic carbon. Thus, because the Upper Floridan aquifer generally has elevated concentrations of sulfate (relative to ambient Everglades conditions) and surface waters near Lake Okeechobee (the assumed target for ASR receiving waters) are elevated in organic carbon and sulfate, at least some potential for increased methylmercury production might arise from the release of recovered ASR water to locations in or near the Everglades.

Scientific Investigations Report↗
USGS2003

Extent of areal inundation of riverine wetlands along Cypress Creek and the Peace, Alafia, North Prong Alafia, and South Prong Alafia Rivers, west-central Florida

Riverine and palustrine system wetlands are a major ecological component of river basins in west-central Florida. Healthy wetlands are dependent upon the frequency and duration of periodic flooding or inundation. This report assesses the extent, area, depth, frequency, and duration of periodic flooding and the effects of potential surface-water withdrawals on the wetlands along Cypress Creek and the Peace, Alafia, North Prong Alafia, and South Prong Alafia Rivers. Results of the study were derived from step-backwater analysis performed at each of the rivers using the U.S. Army Corps of Engineers Hydrologic Engineering Center-River Analysis System (HEC-RAS) one-dimensional model. The step-backwater analysis was performed using selected daily mean discharges at the 10th, 50th, 70th, 80th, 90th, 98th, 99.5th, and 99.9th percentiles to compute extent of areal inundation, area of inundation, and hydraulic depth to assess the net reduction of areal inundation if 10 percent of the total river flow were diverted for potential withdrawals. The extent of areal inundation is determined by cross-sectional topography and the degree to which the channel is incised. Areal inundation occurs along the broad, low relief of the Cypress Creek floodplain during all selected discharge percentiles. However, areal inundation of the Peace and Alafia Rivers floodplains, which generally have deeply incised channels, occurs at or above discharges at the 80th percentile. The greatest area of inundation along the three rivers generally occurs between the 90th and 98th percentile discharges. The decrease in inundated area resulting from a potential 10-percent withdrawal in discharge ranged as follows: Cypress Creek, 22 to 395 acres (1.7 to 8.4 percent); Peace River, 17 to 1,900 acres (2.1 to 13.6 percent); Alafia River, 1 to 90 acres (1 to 19.6 percent); North Prong Alafia River, 1 to 46 acres (0.7 to 23.4 percent); and South Prong Alafia River, 1 to 75 acres (1.5 to 13.4 percent).

Water-Resources Investigations Report↗
USGS2013

Data management challenges in species distribution modeling

An important component in the fields of ecology and conservation biology is understanding the environmental conditions and geographic areas that are suitable for a given species to inhabit. A common tool in determining such areas is species distribution modeling which uses computer algorithms to determine the spatial distribution of organisms. Most commonly the correlative relationships between the organism and environmental variables are the primary consideration. The data requirements for this type of modeling consist of known presence and possibly absence locations of the species as well as the values of environmental or climatic covariates thought to define the species habitat suitability at these locations. These covariate data are generally extracted from remotely sensed imagery, interpolated/gridded historical climate data, or downscaled climate model output. Traditionally, ecologists and biologists have constructed species distribution models using workflows and data that reside primarily on their local workstations or networks. This workflow is becoming challenging as scientists increasingly try to use these modeling techniques to inform management decisions under different climate change scenarios. This challenge stems from the fact that remote sensing products, gridded historical climate, and downscaled climate models are not only increasing in spatial and temporal resolution but proliferating as well. Any rigorous assessment of uncertainty requires a computationally intensive sensitivity analysis accounting for various sources of uncertainty. The scientists fitting these models generally do not have the background in computer science required to take advantage of recent advances in web-service based data acquisition, remote high-powered data processing, or scientific workflow systems. Ecologists in the field of modeling are in need of a tractable platform that abstracts the inherent computational complexity required to incorporate the burgeoning field of coupled climate and ecological response modeling. In this paper we describe the computational challenges in species distribution modeling and solutions using scientific workflow systems. We focus on the Software for Assisted Species Modeling (SAHM) a package within VisTrails, an open-source scientific workflow system.

Bulletin of the Technical Committee on Data Engine↗
USGS2011

Microbial ecology of deep-water mid-Atlantic canyons

The research described in this fact sheet will be conducted from 2012 to 2014 as part of the U.S. Geological Survey's DISCOVRE (DIversity, Systematics, and COnnectivity of Vulnerable Reef Ecosystems) Program. This integrated, multidisciplinary effort will be investigating a variety of topics related to unique and fragile deep-sea ecosystems from the microscopic level to the ecosystem level. One goal is to improve understanding, at the microbiological scale, of the benthic communities (including corals) that reside in and around mid-Atlantic canyon habitats and their associated environments. Specific objectives include identifying and characterizing the microbial associates of deep-sea corals, characterizing the microbial biofilms on hard substrates to better determine their role in engineering the ecosystem, and adding a microbial dimension to benthic community structure and function assessments by characterizing micro-eukaryotes, bacteria, and archaea in deep-sea sediments.

Fact Sheet↗
USGS2007

Recommendations for a barrier island breach management plan for Fire Island National Seashore, including the Otis Pike High Dune Wilderness Area, Long Island, New York

The U.S Army Corps of Engineers, New York District is developing engineering plans, including economic costs and benefits, for storm damage reduction along an 83 mile stretch of the coastal barrier islands and beaches on the south shore of Long Island, NY from Fire Island Inlet east to the Montauk Point headland. The plan, expected to include various alternatives for storm protection and erosion mitigation, is referred to as the Fire Island to Montauk Point Reformulation Plan (FIMP). These plans are expected to follow the Corps of Engineers’ Environmental Operating Principles striving for long term environmental sustainability and balance between environmental protection and protection of human health and property. Fire Island National Seashore (FIIS), a 19,579 acre unit of the National Park System includes a 32 mile long coastal barrier island located within the FIMP project area. A seven-mile section of the park, Otis Pike Fire Island High Dune Wilderness Area, is also a designated Federal Wilderness Area. The FIIS includes not only the barrier island and sand dunes, but also several islands, sand flats and wetlands landward of the barrier, submerged parts of Great South Bay shoreface, extending approximately 4,000 feet into the bay with the inner shelf region extending approximately 1,000 feet seaward of the Fire Island shoreline. The Fire Island barrier islands, a sand-starved system dominated by highly dynamic processes, are struggling to maintain their integrity in the face of sea-level rise and storms. Adding to the dilemma is that development on the barriers and the mainland has increased greatly during the past 50 years. As such, managers and decision makers in federal agencies, state agencies and local governments are challenged to balance tradeoffs between protection of lives and property, public access and long term conservation of natural habitats and processes and the plants and animals that depend on these habitats. National Park Service (NPS) policy stipulates that natural coastal processes be maintained to the greatest extent possible and not be impeded so as to conserve landforms, habitats and natural ecosystem resources that reply on the landforms and processes for long-term sustainability of the national park. Storms and associated processes such as waves, tides, currents and relative sea-level change are critical elements for the formation and evolution of these barrier islands, sand dunes, back-barrier sand flats and lagoons and vegetated wetlands. Processes such as wave run-up, overwash and barrier beaching, which occur during elevated storm surge are all necessary processes in enabling the efficient transfer of sediments, nutrients and marine water from the Atlantic Ocean across barriers and into Great South Bay. A large body of scientific data and information published over the past 50 years shows that such transfers of sediment and water from the ocean to the bays are essential for the long-term maintenance of the barrier island and back-bay systems and their biologically diverse habitats an d ecosystems. Current relative sea-level rise (~12 in/century) is chronic and pervasive in driving Long Island coastal change and with the likelihood of accelerating sea level rise in the near future, coastal hazards such as erosion, inundation, and storm surge flooding will increase, with corresponding increased risk to life and property on both Fire Island and on the mainland. In addition, the cumulative effects over the past century and more, both direct and indirect, of human impacts on the Long Island coast have altered the barrier beach and dunes and sediment transport processes. These impacts have likely increased the potential for breaching and increased risk to life and property on the coast and the mainland. Examples of direct impacts are: the stone jetties at Moriches, Shinnecock, and Fire Island tidal inlets and groin field structures at Westhampton that alter littoral processes, armoring and erosion-control stabilization of the headlandds such as the Montauk Point headlands, and deepening of navigation channels by dredging through the tidal inlets and in the bays. Indirect impacts that have a bearing on decisions to deal with breaching are: high-risk development of the barrier islands and low-lying areas of the mainland vulnerable to flooding, and the dredging of nearshore sand shoals for beach nourishment. The NPS strives to employ a coastal management framework for decision making that is based on assessment of the physical and ecological properties of the shoreline as well as human welfare and property. In order to protect developed areas of Fire Island and the mainland from loss of life, flooding, and other economic and physical damage, the NPS will likely need to consider allowing artificial closure of some breaches within the FIIS under certain circumstances. The decision by the NPS to allow breaches to evolve naturally and possibly close or to allow artificially closing breaches is based on four criteria: 1. Volumes of sediment transported landward and exchange of water and nutrients; 2. Elevated water levels and flooding risk to mainland life and property; 3. Engineering processes of artificial closure; and 4. Economic costs and benefits of artificial closure. This report for breach management presents protocols which specify when breach closures within the FIIS might be desirable and necessary, as well as provides recommendations for structural breach closure engineering operations which are indented to minimize negative impacts to the natural wilderness values and cultural resources within the FIIS, particularly the Otis Pike Wilderness Area. The goal of the plan is to strike a balance between protecting natural resources and allowing natural processes to operate and avoiding loss of life and excessive property damage.

New York↗