Search USGS⌕ Search

SEARCH · Search USGS

Results for “California Geology”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14Linked to original sources
USGS2014

Paleogeomorphology of the early Colorado River inferred from relationships in Mohave and Cottonwood Valleys, Arizona, California and Nevada

Geologic investigations of late Miocene–early Pliocene deposits in Mohave and Cottonwood valleys provide important insights into the early evolution of the lower Colorado River system. In the latest Miocene these valleys were separate depocenters; the floor of Cottonwood Valley was ∼200 m higher than the floor of Mohave Valley. When Colorado River water arrived from the north after 5.6 Ma, a shallow lake in Cottonwood Valley spilled into Mohave Valley, and the river then filled both valleys to ∼560 m above sea level (asl) and overtopped the bedrock divide at the southern end of Mohave Valley. Sediment-starved water spilling to the south gradually eroded the outlet as siliciclastic Bouse deposits filled the lake upstream. When sediment accumulation reached the elevation of the lowering outlet, continued erosion of the outlet resulted in recycling of stored lacustrine sediment into downstream basins; depth of erosion of the outlet and upstream basins was limited by the water levels in downstream basins. The water level in the southern Bouse basin was ∼300 m asl (modern elevation) at 4.8 Ma. It must have drained and been eroded to a level <150 m asl soon after that to allow for deep erosion of bedrock divides and basins upstream, leading to removal of large volumes of Bouse sediment prior to massive early Pliocene Colorado River aggradation. Abrupt lowering of regional base level due to spilling of a southern Bouse lake to the Gulf of California could have driven observed upstream river incision without uplift. Rapid uplift of the entire region immediately after 4.8 Ma would have been required to drive upstream incision if the southern Bouse was an estuary.

Arizona, California, Nevada↗
USGS2006

Database for the east half of "Preliminary Geologic Map of the Blythe 30' by 60' quadrangle, California and Arizona"

This digital map database was prepared from the published Preliminary Geologic Map of the Blythe 30' by 60' Quadrangle, California and Arizona (U.S. Geological Survey Open-File Report 90-497). This database represents the east half of the original published map. The database contains exactly the same scientific content as the original map; no data have been added to, subtracted from, or modified from the original map. Like the original paper map, this database represents the general distribution of bedrock and surficial deposits in the mapped area. It provides information on the geologic structure and stratigraphy of the area covered. The database delineates map units that are identified by general age and lithology following the stratigraphic nomenclature of the U.S. Geological Survey. The scale of the original published map limits the spatial resolution (scale) of the database to 1:100,000 or smaller.

Arizona, California↗
USGS2012

The influence of upper-crust lithology on topographic development in the central Coast Ranges of California

A fundamental geological tenet is that as landscapes evolve over graded to geologic time, geologic structures control patterns of topographic distribution in mountainous areas such that terrain underlain by competent rock will be higher than terrain underlain by incompetent rock. This paper shows that in active orogens where markedly weak and markedly strong rocks are juxtaposed along contacts that parallel regional structures, relatively high topography can form where strain is localized in the weak rock. Such a relationship is illustrated by the topography of the central Coast Ranges between the Pacific coastline and the San Andreas fault zone (SAFZ), and along the length of the Gabilan Mesa (the “Gabilan Mesa segment” of the central Coast Ranges). Within the Gabilan Mesa segment, the granitic upper crust of the Salinian terrane is in contact with the accretionary-prism mélange upper crust of the Nacimiento terrane along the inactive Nacimiento fault zone. A prominent topographic lineament is present along most of this lithologic boundary, approximately 50 to 65 km southwest of the SAFZ, with the higher topography formed in the mélange on the southwest side of the Nacimiento fault. This paper investigates factors influencing the pattern of topographic development in the Gabilan Mesa segment of the central Coast Ranges by correlating shortening magnitude with the upper-crust compositions of the Salinian and Nacimiento terranes. The fluvial geomorphology of two valleys in the Gabilan Mesa, which is within the Salinian terrane, and alluvial geochronology based on optically-stimulated luminescence (OSL) age estimates, reveal that the magnitude of shortening accommodated by down-to-the-southwest tilting of the mesa since 400 ka is less than 1 to 2 m. Our results, combined with those of previous studies, indicate that at least 63% to 78% of late-Cenozoic, northeast–southwest directed, upper-crustal shortening across the Gabilan Mesa segment has been accommodated within the Nacimiento terrane. This is significant because perpendicular to orogenic strike the Nacimiento terrane constitutes less than ¼ of the distance between the coast and the SAFZ, and the other ¾ (or greater) of the distance between the coast and the SAFZ is underlain by the granitic upper crust of the Salinian terrane. We propose that strain and mountain building are localized within the Nacimiento terrane because it consists predominantly of the relatively weak Franciscan Complex mélange, and because the upper crust of the Salinian terrane is composed of relatively strong granitic rocks. Our hypothesis is supported by the distribution of post-seismic surface uplift associated with the 2003, 6.5 M W San Simeon earthquake, which mimics the topography of the southwestern part of the Gabilan Mesa segment of the central Coast Ranges.

California↗
USGS2012

Active tectonic and magmatic processes beneath Long Valley Caldera, eastern California: An overview

Geological, chronological, and structural studies of the Long Valley-Mono/Inyo Craters area document a long history of related volcanic eruptions and earthquakes controlled by regional extensional tectonics of the Basin and Range province. This activity has persisted for hundreds of thousands of years and is likely to continue. The Long Valley magma chamber had a volume approaching 3000 km 3 prior to its climatic caldera-forming eruption 0.7 m.y. ago but has been reduced to less than a third of this volume by cooling, eruption, and crystallization. Seismic evidence indicates that the main mass of the present Long Valley magma chamber is about 10 km in diameter and that its roof is 8–10 km deep with smaller cupolas as shallow as 4–5 km. Although a chamber of this size is probably capable of producing an eruption approaching 30 km 3 of lava, the record over the past 0.5 m.y. suggests that eruptions of 1 km 3 or less are far more likely. Models proposed for the current ground uplift and seismicity within the caldera require inflation of 0.1–0.2 km 3 by additional magma since mid-1979, and some models suggest that inflation was accompanied by injection of a thin dike or dikes (probably of silicic magma) into the ring fracture zone beneath the south moat. Several of the M 5.8–6.2 earthquakes that occurred in the region beginning in 1978 had non-double-couple focal mechanisms. Whether these unusual mechanisms indicate injection of mafic (low-viscosity) magma at midcrustal depths in the Sierra Nevada block south of the caldera remains debatable. Studies of calderas of various ages throughout the world indicate that episodes of unrest are relatively common and do not invariably culminate in eruptions. Although current unrest is concentrated in the south moat of Long Valley caldera, the Inyo/Mono Craters probably hold a greater potential for producing an eruption in the foreseeable future. The Inyo/Mono Craters have erupted at 500-year intervals over the past 2000–3000 years, whereas the Long Valley magma chamber has erupted at about 200,000-year intervals over the past 700,000 years. In either case, a major earthquake near the caldera could strongly influence the course of volcanic activity.

Journal of Geophysical Research Solid Earth↗
USGS1973

Reinterpretation of the boundary between the Cosumnes and Logtown Ridge Formations, Amador County, California

Recent detailed geologic mapping in the Sierran foothills reveals that rocks previously included in the Jurassic Amador Group must be redefined. The term “Amador Group” was applied by Taliaferro and Clark to a section of epiclastic metasedimentary rocks (the Cosumnes Formation) and the seemingly conformable overlying metavolcanic rocks (the Logtown Ridge Formation). New structural and stratigraphic evidence indicates that at their type localities on the banks of the Cosumnes River the boundary between the two formations should be relocated about 610 m downsection from the position shown by Clark. This change removes all known paleontological control on the age of the Cosumnes Formation. Structural relations show that the type Cosumnes and Logtown Ridge Formations are in fault contact at the Cosumnes River. Rocks of the Cosumnes Formation are now grouped with a complex unit of megabreccia that includes other strata previously termed the “western belt” of the Calaveras Formation. The megabreccia formed, at least partly, sometime between late Paleozoic and Late Jurassic times, but rocks in the megabreccia, including the Cosumnes Formation, could be older than late Paleozoic. The term “Amador Group” is herein abandoned.

California↗
USGS1970

A summary of preliminary studies of sedimentation and hydrology in Bolinas Lagoon, Marin County, California

The U.S. Geological Survey is investigating sedimentary and hydrologic conditions in Bolinas Lagoon, a 1,100-acre lagoon 15 miles northwest of San Francisco. The program began in May 1967 and will continue into 1970. Only the study results analyzed before June 1968 are summarized in the report. Two series of measurements of suspended-sediment load and water discharge in the lagoon inlet showed that much of the suspended sediment is sand and that the average velocity was as much as 4.7 feet per second. Littoral drift near the inlet was generally toward the inlet, whereas farther from the inlet the pattern is irregular. Circulation velocities in the lagoon decrease rapidly away from the inlet, but probably remain high enough to erode bottom sediment along the channels. In most of the lagoon median size of bottom sediment was fine sand. Sediment was derived chiefly from Monterey Shale.

Circular↗
USGS2003

Geohydrology of Recharge and Seawater Intrusion in the Pajaro Valley, Santa Cruz and Monterey Counties, California

The U.S. Geological Survey (USGS) in cooperation with the Pajaro Valley Water Management Agency (PVWMA), has completed the collection and analyses of geologic, hydrologic, geophysical, and geochemical data in the coastal aquifer systems of the Pajaro Valley (fig. 1). These data were collected to delineate the geohydrologic framework of seawater intrusion, as well as, the source, age, and movement of ground water in the coastal aquifer systems (Hanson, 2003).

Fact Sheet↗
USGS2015

Sustainable groundwater management in California

The U.S. Geological Survey (USGS) uses data collection, modeling tools, and scientific analysis to help water managers plan for, and assess, hydrologic issues that can cause &ldquo;undesirable results&rdquo; associated with groundwater use. This information helps managers understand trends and investigate and predict effects of different groundwater-management strategies.

California↗
USGS2001

Gravity data along LARSE (Los Angeles Regional Seismic Experiment) Line II, southern California

The U.S. Geological Survey conducted a detailed gravity study along part of the Los Angeles Regional Seismic Experiment (LARSE) transect across the San Fernando Basin and Transverse Ranges to help characterize the structure underlying this area. 249 gravity measurements were collected along the transect and to augment regional coverage near the profile. An isostatic gravity low of 50-60 mGal reflects the San Fernando-East Ventura basin. Another prominent isostatic gravity with an amplitude of 30 mGal marks the Antelope Valley basin. Gravity highs occur over the Santa Monica Mountains and the Transverse Ranges. The highest isostatic gravity values coincide with outcrops of Pelona schist.

California↗
USGS2016

Bathymetric survey and digital elevation model of Little Holland Tract, Sacramento-San Joaquin Delta, California

The U.S. Geological Survey conducted a bathymetric survey in Little Holland Tract, a flooded agricultural tract, in the northern Sacramento-San Joaquin Delta (the &ldquo;Delta&rdquo;) during the summer of 2015. The new bathymetric data were combined with existing data to generate a digital elevation model (DEM) at 1-meter resolution. Little Holland Tract (LHT) was historically diked off for agricultural uses and has been tidally inundated since an accidental levee breach in 1983. Shallow tidal regions such as LHT have the potential to improve habitat quality in the Delta. The DEM of LHT was developed to support ongoing studies of habitat quality in the area and to provide a baseline for evaluating future geomorphic change. The new data comprise 138,407 linear meters of real-time-kinematic (RTK) Global Positioning System (GPS) elevation data, including both bathymetric data collected from personal watercraft and topographic elevations collected on foot at low tide. A benchmark (LHT15_b1) was established for geodetic control of the survey. Data quality was evaluated both by comparing results among surveying platforms, which showed systematic offsets of 1.6 centimeters (cm) or less, and by error propagation, which yielded a mean vertical uncertainty of 6.7 cm. Based on the DEM and time-series measurements of water depth, the mean tidal prism of LHT was determined to be 2,826,000 cubic meters. The bathymetric data and DEM are available at http://dx.doi.org/10.5066/F7RX9954 .

California↗
USGS1981

E-field ratio telluric survey near the Big Maria Mountains, Riverside County, California

The U.S. Geological Survey (USGS) under the Wilderness Act (Public Law 88-577) and the Federal Land Policy and Management Act (Public Law 94-579) has the responsibility, along with the U.S. Bureau of Mines, to survey certain areas in order to determine their mineral resource potential. This report presents results of three electric-field ratio telluric traverses conducted as part of the Bureau of Land Management Wilderness Program in the Big Maria Mountains, Riverside County, Calif. The telluric traverses were run on the southwest side of the Big Maria Mountains in an attempt to define the location of major buried faults near the eroded front of the range. E-field ratio tellurics is a descriptive name applied to the electrical exploration technique used in this survey. The telluric method refers to the measurement of the earth's electric field generated by induction from natural electromagnetic waves arriving at the surface. The E-field ratio telluric method uses a receiving array of three electrodes spaced equidistant and inline. This array is, in effect, two colinear dipoles sharing a common electrode. The potential difference across each dipole is then proportional to the component of the telluric field in the direction of the array. This configuration permits the measurement of the ratio of the telluric field at each dipole in the direction of the dipole line, and hence the name. The traverse data is extended by moving the three-electrode array forward one dipole length so that the forward electrode becomes the center electrode for the next ratio measurement. Electric-field data so obtained are proportional to the square root of the apparent resistivity of the earth at the location of the dipoles. However, because the apparent resistivity can be a function of the dipole direction, it is important to know the orientation of the dipoles with respect to major structures. Because the resistivity of fluid-saturated earth materials is largely dependent on the porosity of the rocks, the salinity of the pore fluid, and the presence of clays or similar material where surface conduction is high, alluvial fill, argillite and similar rocks tend to have low resistivities whereas igneous or high-grade metamorphic rocks have high resistivities. Variation in the electrical properties along a traverse may then be used to infer lithologic or structural changes.

California↗
USGS1997

Preliminary geologic map of the Little Piute Mountains, California: A digital database

The Little Piute Mountains Digital database contains digital geologic and geographic information for the study area. The geology was mapped at a scale of 1:8,000, and the topographic information was input from the Little Piute Mountains, CA 1:24,000 quadrangle. The accuracy of the spatial information is limited to the input scale. Postscript files, originally published in paper format as Open-file map 95-598, have been included for those who do not have access to a geographic information system. The files are equivalent to those which produced the hard-copy open file. They can be printed on any device equipped to print postscript files of the appropriate file size.

California↗
USGS2025

Application of Hydrologic Simulation Program—FORTRAN (HSPF) as part of an integrated hydrologic model for the Salinas Valley, California

The U.S. Geological Survey (USGS), in cooperation with the Monterey County Water Resources Agency, conducted studies to help evaluate the surface-water and groundwater resources of the Salinas Valley study area, consisting of the entire Salinas River watershed and several smaller, adjacent coastal watersheds draining into Monterey Bay. The Salinas Valley study area is a highly productive agricultural region that depends on the coordinated use of surface water and groundwater to meet demand for irrigation and public water supply. To continue to meet these demands, a better understanding of the historical water balance and the effects of water-resource development on the long-term sustainability of water resources in the Salinas Valley study area is needed.

California↗
USGS2002

Three-dimensional hydrogeologic framework model for use with a steady-state numerical ground-water flow model of the Death Valley regional flow system, Nevada and California

The U.S. Geological Survey, in cooperation with the Department of Energy and other Federal, State, and local agencies, is evaluating the hydrogeologic characteristics of the Death Valley regional ground-water flow system. The ground-water flow system covers an area of about 100,000 square kilometers from latitude 35? to 38?15' North to longitude 115? to 118? West, with the flow system proper comprising about 45,000 square kilometers. The Death Valley regional ground-water flow system is one of the larger flow systems within the Southwestern United States and includes in its boundaries the Nevada Test Site, Yucca Mountain, and much of Death Valley. Part of this study includes the construction of a three-dimensional hydrogeologic framework model to serve as the foundation for the development of a steady-state regional ground-water flow model. The digital framework model provides a computer-based description of the geometry and composition of the hydrogeologic units that control regional flow. The framework model of the region was constructed by merging two previous framework models constructed for the Yucca Mountain Project and the Environmental Restoration Program Underground Test Area studies at the Nevada Test Site. The hydrologic characteristics of the region result from a currently arid climate and complex geology. Interbasinal regional ground-water flow occurs through a thick carbonate-rock sequence of Paleozoic age, a locally thick volcanic-rock sequence of Tertiary age, and basin-fill alluvium of Tertiary and Quaternary age. Throughout the system, deep and shallow ground-water flow may be controlled by extensive and pervasive regional and local faults and fractures. The framework model was constructed using data from several sources to define the geometry of the regional hydrogeologic units. These data sources include (1) a 1:250,000-scale hydrogeologic-map compilation of the region; (2) regional-scale geologic cross sections; (3) borehole information, and (4) gridded surfaces from a previous three-dimensional geologic model. In addition, digital elevation model data were used in conjunction with these data to define ground-surface altitudes. These data, properly oriented in three dimensions by using geographic information systems, were combined and gridded to produce the upper surfaces of the hydrogeologic units used in the flow model. The final geometry of the framework model is constructed as a volumetric model by incorporating the intersections of these gridded surfaces and by applying fault truncation rules to structural features from the geologic map and cross sections. The cells defining the geometry of the hydrogeologic framework model can be assigned several attributes such as lithology, hydrogeologic unit, thickness, and top and bottom altitudes.

Water-Resources Investigations Report↗
USGS1975

Evaluation of recharge potential near Indio, California

The U.S. Geological Survey evaluated the feasibility of utilizing 8,000 acre-feet (9.9 cubic hectometres) of sewage effluent per year to recharge the ground water in a 25-square mile (65-square kilometre) area northwest of Indio, Calif. The depth to water in the area studied ranged from about 50 feet (15 metres) to more than 200 feet (61 metres). Dissolved-solids concentrations greater than 500 milligrams per litre exist in the shallow aquifers in the eastern and southern parts of the study area. The permeability of the shallow sediments ranges from 15 to 50 feet per day (5 to 15 metres per day). The eastern part of the area is underlain by fine-grained sediments that effectively separate the deep and shallow aquifers and would not be conducive to artificial recharge. In the western part of the area, sediments in the upper 100 feet (30 metres) are primarily sand. Considering all but economic factors, the most hydrologically favorable area for recharge is west of Washington Street and north of the Whitewater River. Using three spreading pits on a rotating basis and assuming long-term infiltration rates of 2 feet per day (0.6 metre per day), an area of 33 acres (13 hectares) would be required to infiltrate 8,000 acre-feet (9.9 cubic hectometres) per year. At the recharge site, a water-level rise of about 36 feet (11 metres) due to recharge is expected.

California↗
USGS2017

Late Quaternary fluvial history of Santa Cruz Island, California, USA

The geologic history of fluvial systems on Santa Cruz Island (SCI) is complex, involving responses to both allogenic and autogenic forcings. During periods of low or lowering sea level, canyons on the island were eroded and sediment was transported off the island onto the exposed marine shelf. When sea level rose, streams aggraded, building a sedimentary wedge that progressed from the shelf upstream into the canyons. This cycle of erosion and aggradation in response to glacial–interglacial sea-level cycles was likely repeated numerous times during the Quaternary, although clear evidence of only the most recent cycle is present in the island’s alluvial sequences. Christy, Sauces, and Pozo Canyons contain thick packages of fine-grained sediments that were deposited as a result of the interaction between autogenic depositional processes and allogenic forcing of continuous base-level rise. Other canyons on the island either have little alluvial fill due to their steep gradients or are filled with coarse-grained, recent (likely late Holocene) alluvium that covers the older alluvial deposits. Differences in the nature and extent of the alluvial exposures on SCI relative to those on neighboring Santa Rosa Island reflect differences in the local topography, geology, and ranching histories of the 2 islands.

California↗
USGS2010

Stratigraphy, age, and depositional setting of the Miocene Barstow Formation at Harvard Hill, central Mojave Desert, California

New detailed geologic mapping and geochronology of the Barstow Formation at Harvard Hill, 30 km east of Barstow, CA, help to constrain Miocene paleogeography and tectonics of the central Mojave Desert. A northern strand of the Quaternary ENE-striking, sinistral Manix fault divides the Barstow Formation at Harvard Hill into two distinct lithologic assemblages. Strata north of the fault consist of: a green rhyolitic tuff, informally named the Shamrock tuff; lacustrine sandstone; partially silicified thin-bedded to massive limestone; and alluvial sandstone to pebble conglomerate. Strata south of the fault consist of: lacustrine siltstone and sandstone; a rhyolitic tuff dated at 19.1 Ma (U-Pb); rock-avalanche breccia deposits; partially silicified well-bedded to massive limestone; and alluvial sandstone and conglomerate. Our U-Pb zircon dating of the Shamrock tuff by SHRIMP-RG yields a peak probability age of 18.7 &plusmn; 0.1 Ma. Distinctive outcrop characteristics, mineralogy, remanent magnetization, and zircon geochemistry (Th/U) suggest that the Shamrock tuff represents a lacustrine facies of the regionally extensive Peach Spring Tuff (PST). Here we compare zircon age and geochemical analyses from the Shamrock tuff with those of the PST at Stoddard Wash and provide new insight into the age of zircon crystallization in the PST rhyolite. Results of our field studies show that Miocene strata at Harvard Hill mostly accumulated in a lacustrine environment, although depositional environments varied from a relatively deep lake to a very shallow lake or even onshore setting. Rock-avalanche breccias and alluvial deposits near the base of the exposed section indicate proximity to a steep basin margin and detrital studies suggest a southern source for coarse-grained deposits; therefore, we may infer a southern basin-margin setting at Harvard Hill during the early Miocene. Our geochronology demonstrates that deposition of the Barstow Formation at Harvard Hill extended from before ~19.1 Ma until well after ~18.7 Ma, similar to timing of Barstow Formation lake deposition in the Calico Mountains but at least 3 million years older than comparable lacustrine facies in the Mud Hills type section. These observations are consistent with either of two paleogeographic models: westward transgression of lacustrine environments within a single large basin, or sequential development of geographically distinct eastern and western sub-basins.

California↗