Search USGS⌕ Search

SEARCH · Search USGS

Results for “The R Journal”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13Linked to original sources
USGS2012

Structural analysis of the southern Peninsular, southern Wrangellia, and northern Chugach terranes along the Trans-Alaska Crustal Transect, northern Chugach Mountains, Alaska

Structural and tectonic analysis of the southern Peninsular, southern Wrangellia, and northern Chugach terranes, along the Trans-Alaska Crustal Transect in the northern Chugach Mountains documents a long succession of Early Jurassic through Cenozoic deformational events. The deformational events are generally characterized by distinctive structural fabrics and metamorphisms. Most of the events are interpreted to be related to subduction-related accretion or terrane accretion along the Border Ranges fault system (BRFS) and companion faults, and the Contact fault system (CFS). Each period of subduction-related accretion consisted of underplating of the outboard unit beneath the adjacent inboard unit. The fabric associated with each subduction-related accretion consisted of folding, intense shearing, and local rolling of planar structures. Age and structural relationships suggest migration of the zone of subduction-related accretion from the BRFS to the north, through each accreting unit, to younger bounding thrust faults to the south. Other older and younger deformational events are also recognized and are interpreted to have formed before and after, respectively, accretions along the BRFS and CFS. The main younger deformational events are (1) early Tertiary north verging folding of portions of the northern Chugach and southern Wrangellia terranes and (2) broad folding and rotation of major and minor structures related to subduction-related accretion or terrane accretion during early and middle Tertiary oroclinal bending of Alaska.

Journal of Geophysical Research Solid Earth↗
USGS2012

The Kanuti ophiolite, Alaska

The Kanuti ophiolite is a mafic-ultramafic thrust sheet of probable Jurassic age, formerly considered to be the upper part of the Yukon-Koyukuk ophiolite belt (Angayucham terrane). It is here called the Kanuti ophiolite after the Kanuti River region on the southeastern flank of the Yukon-Koyukuk Basin. The thrust sheet crops out discontinuously for a distance of more than 900 km along the northern and southeastern margins of the basin. It is probably correlative with similar ophiolite thrust sheets to the north in the western Brooks Range and to the south in the Ruby geanticline. Technically, the ophiolite is considered to be the Kanuti thrust panel of the Angayucham-Totzitna terrane. The Kanuti consistently overlies another extensive thrust sheet, consisting mostly of pillow basalt and radiolarian chert of Devonian to Jurassic age (Narvak thrust panel). This sheet is thrust over a third sheet consisting of probable Devonian phyllite and metagraywacke, which is in turn thrust over older metamorphic rocks (Slate Creek thrust panel). The Kanuti ophiolite is a partial ophiolite that consists of a lower residual mantle suite and an upper magmatic suite, but dikes, extrusives, and sediments are absent. The residual mantle suite is composed of harzburgite and dunite with refractory mineral compositions. The harzburgite is attributed to partial melting and extraction of basaltic magma; residual dunite is attributed to partial melting or to reaction of orthopyroxene out of harzburgite in contact with ascending melt diapirs. The magmatic suite consists of layered ultramafic and gabbroic rocks, containing minerals having limited iron enrichment. The absence of large volumes of magmatic rocks intermediate in composition between cumulus ultramafics and evolved gabbros favors periodic introduction of magma, rather than closed system fractional crystallization. The ultramafic rocks of both the residual mantle and magmatic suites are tectonites, which have undergone high-temperature deformation involving isoclinal folding on all scales and related syntectonic recrystallization. The olivine fabric is consistent with the glide system {0kl} [100], which has been produced experimentally at 800°–1190°C at 20 kbar. Olivine Z axes and subparallel isoclinal fold axes have consistent, northeast trends throughout the Kanuti region (>100 km NE-SW) and may be close to the original upper mantle flow direction, despite later low-angle thrust faulting. The order of crystallization in the cumulus ultramafic rocks of the magmatic suite is olivine, clinopyroxene, plagioclase, and orthopyroxene. The high Mg numbers of clinopyroxene (0.85–0.93) coexisting with olivine suggest that the cumulus ultramafic rocks crystallized at relatively high pressures (>10 kbar). The effects of parental magma composition cannot be evaluated, but the small difference in Mg numbers of coexisting olivine and clinopyroxene in the cumulus ultramafic rocks and in residual harzburgite suggests that regardless of absolute pressures, the pressure difference between the melting that produced the basalt magma and the initial fractional crystallization of the magma is small. Because of the limited range in rock types in the ophiolite, the tectonic environment cannot be interpreted unambiguously. However, the structural and petrological data are best reconciled with an origin in a volcanic arc tectonic setting.

Journal of Geophysical Research Solid Earth↗
USGS2016

ChemCam activities and discoveries during the nominal mission of the Mars Science Laboratory in Gale crater, Mars

At Gale crater, Mars, ChemCam acquired its first laser-induced breakdown spectroscopy (LIBS) target on Sol 13 of the landed portion of the mission (a Sol is a Mars day). Up to Sol 800, more than 188 000 LIBS spectra were acquired on more than 5800 points distributed over about 650 individual targets. We present a comprehensive review of ChemCam scientific accomplishments during that period, together with a focus on the lessons learned from the first use of LIBS in space. For data processing, we describe new tools that had to be developed to account for the uniqueness of Mars data. With regard to chemistry, we present a summary of the composition range measured on Mars for major-element oxides (SiO 2 , TiO 2 , Al 2 O 3 , FeO T , MgO, CaO, Na 2 O, K 2 O) based on various multivariate models, with associated precisions. ChemCam also observed H, and the non-metallic elements C, O, P, and S, which are usually difficult to quantify with LIBS. F and Cl are observed through their molecular lines. We discuss the most relevant LIBS lines for detection of minor and trace elements (Li, Rb, Sr, Ba, Cr, Mn, Ni, and Zn). These results were obtained thanks to comprehensive ground reference datasets, which are set to mimic the expected mineralogy and chemistry on Mars. With regard to the first use of LIBS in space, we analyze and quantify, often for the first time, each of the advantages of using stand-off LIBS in space: no sample preparation, analysis within its petrological context, dust removal, sub-millimeter scale investigation, multi-point analysis, the ability to carry out statistical surveys and whole-rock analyses, and rapid data acquisition. We conclude with a discussion of ChemCam performance to survey the geochemistry of Mars, and its valuable support of decisions about selecting where and whether to make observations with more time and resource-intensive tools in the rover's instrument suite. In the end, we present a bird's-eye view of the many scientific results: discovery of felsic Noachian crust, first observation of hydrated soil, discovery of manganese-rich coatings and fracture fills indicating strong oxidation potential in Mars' early atmosphere, characterization of soils by grain size, and wide scale mapping of sedimentary strata, conglomerates, and diagenetic materials.

Journal of Analytical Atomic Spectrometry↗
USGS1986

Electrothermal atomisation atomic absorption conditions and matrix modifications for determining antimony, arsenic, bismuth, cadmium, gallium, gold, indium, lead, molybdenum, palladium, platinum, selenium, silver, tellurium, thallium and tin following back-extraction of organic aminohalide extracts

A multi-element organic-extraction and back-extraction procedure, that had been developed previously to eliminate matrix interferences in the determination of a large number of trace elements in complex materials such as geological samples, produced organic and aqueous solutions that were complex. Electrothermal atomisation atomic absorption conditions and matrix modifications have been developed for 13 of the extracted elements (Ag, As, Au, Bi, Cd, Ga, In, Pb, Sb, Se, Sn, Te and Tl) that enhance sensitivity, alleviate problems resulting from the complex solutions and produce acceptable precision. Platinum, Pd and Mo can be determined without matrix modification directly on the original unstripped extracts.

Journal of Analytical Atomic Spectrometry↗
USGS2001

Negligible risk associated with the movement of processed rainbow trout, Oncorhynchus mykiss (Walbaum), from an infectious haematopoietic necrosis virus (IHNV) endemic area

To assess the risk of transmission of infectious haematopoietic necrosis virus (IHNV) associated with the movement of processed rainbow trout, Oncorhynchus mykiss, from an area where the virus is endemic, 240 freshly eviscerated fish (225-500 g) exhibiting spinal curvature or spinal compression types of deformities were tested for IHNV by virus isolation and polymerase chain reaction (PCR) techniques. Commercially produced rainbow trout, approximately 1-year-old, that exhibited spinal deformities were considered to have had a high likelihood of having survived an outbreak of IHN. Serological analysis of fish exhibiting spinal curvature or spinal compression types of deformities for anti-IHNV antibodies resulted, in 71 and 50% of the serum samples, respectively, with detectable neutralization activity suggesting previous infection with IHNV. A portion of the skin and muscle in the area of the deformity was collected, as well as brain tissue from each commercially processed fish. Tissue homogenates were tested for IHNV using the epithelioma papulosum cyprini (EPC) cell line pretreated with polyethylene glycol and the chinook salmon embryo (CHSE-214) cell line using standard methods. Nested, reverse transcriptase (RT)-PCR for the detection of IHNV used the central 1231 bp portion of the glycoprotein (G) challenge studies and is suggested as a mechanism responsible for virus clearance. These results provide scientific information that can be used to assess the risk associated with the movement of processed rainbow trout from an IHNV endemic area.

Journal of Fish Diseases↗
USGS2003

Relative resistance of Pacific salmon to infectious salmon anaemia virus

Infectious salmon anaemia (ISA) is a major disease of Atlantic salmon, Salmo salar, caused by an orthomyxovirus (ISAV). Increases in global aqua culture and the international movement of fish made it important to determine if Pacific salmon are at risk. Steelhead trout, Oncorhynchus mykiss, and chum, O. keta, Chinook, O. tshawytscha, coho, O. kisutch, and Atlantic salmon were injected intraperitoneally with a high, medium, or low dose of a Norwegian strain of ISAV. In a second challenge, the same species, except chum salmon, were injected with a high dose of either a Canadian or the Norwegian strain. Average cumulative mortality of Atlantic salmon in trial 1 was 12% in the high dose group, 20% in the medium dose group and 16% in the low dose group. The average cumulative mortality of Atlantic salmon in trial 2 was 98%. No signs typical of ISA and no ISAV-related mortality occurred among any of the groups of Oncorhynchus spp. in either experiment, although ISAV was reisolated from some fish sampled at intervals post-challenge. The results indicate that while Oncorhynchus spp. are quite resistant to ISAV relative to Atlantic salmon, the potential for ISAV to adapt to Oncorhynchus spp. should not be ignored.

Journal of Fish Diseases↗
USGS2007

Management of fluid mud in estuaries, bays, and lakes. II: Measurement, modeling, and management

Techniques for measurement, modeling, and management of fluid mud are available, but research is needed to improve them. Fluid mud can be difficult to detect, measure, or sample, which has led to new instruments and new ways of using existing instruments. Multifrequency acoustic fathometers sense neither density nor viscosity and are, therefore, unreliable in measuring fluid mud. Nuclear density probes, towed sleds, seismic, and drop probes equipped with density meters offer the potential for accurate measurements. Numerical modeling of fluid mud requires solving governing equations for flow velocity, density, pressure, salinity, water surface, plus sediment submodels. A number of such models exist in one-, two-, and three-dimensional form, but they rely on empirical relationships that require substantial site-specific validation to observations. Management of fluid mud techniques can be classified as those that accomplish: Source control, formation control, and removal. Nautical depth, a fourth category, defines the channel bottom as a specific fluid mud density or alternative parameter as safe for navigation. Source control includes watershed management measures to keep fine sediment out of waterways and in-water measures such as structures and traps. Formation control methods include streamlined channels and structures plus other measures to reduce flocculation and structures that train currents. Removal methods include the traditional dredging and transport of dredged material plus agitation that contributes to formation control and/or nautical depth. Conditioning of fluid mud by dredging and aerating offers the possibility of improved navigability. Two examples—the Atchafalaya Bar Channel and Savannah Harbor—illustrate the use of measurements and management of fluid mud.

Journal of Hydraulic Engineering↗
USGS2007

Correcting acoustic Doppler current profiler discharge measurements biased by sediment transport

A negative bias in discharge measurements made with an acoustic Doppler current profiler (ADCP) is attributed to the movement of sediment on or near the streambed, and is an issue widely acknowledged by the scientific community. The integration of a differentially corrected global positioning system (DGPS) to track the movement of the ADCP can be used to avoid the systematic bias associated with a moving bed. DGPS, however, cannot provide consistently accurate positions because of multipath errors and satellite signal reception problems on waterways with dense tree canopy along the banks, in deep valleys or canyons, and near bridges. An alternative method of correcting for the moving-bed bias, based on the closure error resulting from a two-way crossing of the river, is presented. The uncertainty in the mean moving-bed velocity measured by the loop method is shown to be approximately 0.6cm/s. For the 13 field measurements presented, the loop method resulted in corrected discharges that were within 5% of discharges measured utilizing DGPS to compensate for moving-bed conditions. ?? 2007 ASCE.

Journal of Hydraulic Engineering↗
USGS2019

Sequestration and transformation in chemically enhanced treatment wetlands: DOC, DBPPs and Nutrients

We examined the effectiveness of chemically enhanced treatment wetlands (CETWs), wetlands that received water treated with coagulants, to remove dissolved organic carbon (DOC), disinfection byproduct precursors (DBPPs), nutrients and metals from agricultural drain water. Wetlands consisted of controls with no coagulant addition, ferric sulfate dosed and polyaluminum chloride dosed treatments. CETWs were more effective in removal of DOC, DBPPs, phosphate, dissolved organic nitrogen and metals than control wetlands. Coagulation treated wetlands removed 245 – 349 g/m2yr DOC, whereas control wetlands produced 51 g/m2yr. Wetland passage released DOC in the controls and treatments; this release was directly correlated to temperature and suggested thermally dependent mechanism(s) were partly responsible. A first-order plug flow reactor kinetic model that considered hydraulic retention time (HRT), temperature and concentration was tested for wetland DOC processing. Models indicate that operating CETWs at high coagulant dosing and low temperature can result in lowest DOC release with additional release suppression. Operating at the lowest HRT to meet discharge targets help overcome wetland processes that increase DOC release and provide the smallest footprint needed for treatment.

Journal of Environmental Engineering↗
USGS2022

Performance of a carbon dioxide injection system at a navigation lock to control the spread of aquatic invasive species

Natural resource agencies need effective strategies to control the spread of aquatic invasive species (AIS) such as invasive fish, which can expand their range using rivers as hydrological pathways to access new areas. Lock and dam structures within major rivers are prospective locations to deploy techniques, such as carbon dioxide ( CO 2 ) infusion into lock water, that could impede upstream AIS migration without disrupting vessel passage and lock operation. The current pesticide label for CO 2 in the United States allows injections of 100–150 mg/LCO 2 as a behavioral deterrent treatment for invasive carps. This research describes the first operationalizing and testing of a CO 2 injection and manifold distribution system at a 1,548,000-L navigation lock chamber on the Fox River near Kaukauna, Wisconsin, USA. Two chemical distribution manifolds located on the floor and wall of the chamber were independently tested to quantify mixing time, mixing homogeneity, injection efficiency, and operational power requirements under a range of operating parameters. Both manifold configurations were able to meet most performance benchmarks established during previous fish behavior studies. Certain limitations were exhibited and quantified for both manifold configurations in terms of mixing homogeneity and operational power. This research details the design and performance of CO2-to-water infusion systems that could be used to deter the spread of AIS at navigation pinch-points. These results may inform future CO 2 system designs and operating conditions to support natural resource management plans to limit the spread of AIS.

Wisconsin↗
USGS2021

Numerical simulation of the boundary layer flow generated in Monterey Bay, California by the 2010 Chilean tsunami: Case study

This work presents a case study involving the numerical simulation of the unsteady boundary layer generated by the 2010 Chilean tsunami, as measured by field equipment in Monterey Bay, California, USA. A one-dimensional vertical (1DV) boundary layer model is utilized, solving Reynolds-averaged Navier–Stokes equations, coupled with two-equation k – ω turbulence closure. Local effects of convective acceleration (converging–diverging effects) on the boundary layer due to the sloping bed are likewise approximated. Four cases are considered involving simulation of: (1) the long tsunami-induced boundary layer flow in isolation, in combination with either (2) convective acceleration effects or (3) energetic short wind waves, and, finally, (4) all effects combined. Reasonable agreement with field measurements is achieved, with model results similarly showing that the tsunami-induced boundary layer in this case only spans a fraction of the local water depth. Systematic comparison of the various cases likewise elucidates the likely significance of both local converging–diverging effects, as well as interaction with the much shorter period wind waves, on the tsunami-generated boundary layer. In the latter case, analogy is drawn to well-known wave–current boundary layer interaction, with the boundary layer turbulence associated with the short wind waves inducing an effective wave roughness felt by the tsunami-induced flow, which effectively plays the role of the current.

California↗
USGS2019

Evaluation of stormwater treatment vault with Coanda-effect screen for removal of solids and phosphorus in urban runoff

Catch basins commonly are used by cities as part of a stormwater management plan to remove sediment and associated contaminants from stormwater, keeping them in compliance with regulations. Recently, the city of Madison, Wisconsin modified traditional catch basins by incorporating a fine-mesh (1-mm) Coanda-effect screen into the design with the goal of increasing removal of sediment and organic matter from stormwater. The US Geological Survey (USGS), in cooperation with the City of Madison, installed a water-quality monitoring station at such a catch basin to quantify reductions in total suspended solids (TSS), volatile suspended solids (VSS), suspended sediment concentration (SSC), total phosphorus (TP), and dissolved phosphorus (DP) from urban stormwater before entering Lake Monona. A comparison of the cumulative load from 33 samples collected during the summers of 2016 and 2017 showed 23% and 45% reductions in TSS and SSC, respectively. A smaller reduction was observed for TP, 16%, whereas DP remained unchanged. Reported traditional catch basin sediment removal varies greatly, although typical removal rates are similar. Results from this study will help regulated municipalities determine whether the use of screened catch basins can help meet water-quality goals.

Wisconsin↗
USGS1969

History of the geomagnetic field

Direct measurements of the direction and strength of the earth's magnetic field have provided a knowledge of the field's form and behavior during the last few hundreds of years. For older times, however, it has been necessary to measure the magnetism of certain rocks to learn what the geomagnetic field was like. For example, when a lava flow solidifies (at temperatures near 1000°C) and cools through the Curie point of the magnetic minerals contained in it (around 500°C) it acquires a remanent magnetism that is (1) very weak, (2) very stablel, (3) paralle to the direction of the ambient geomagnetic field, and (4) proportional in intensity to the ambient field. Separating, by various analytical means, this magnetization from other ``unwanted'' magnetizations has allowed paleomagnetists to study the historical and prehistorical behavior of the earth's field. It has been learned, for example, that the strength of the field was almost twice its present value 2000 years ago and that it has often completely reversed its polarity. Paleo‐magnetists have also confirmed that most oceans are, geologically speaking, relatively new features, and that the continents have markedly changed their positions over the surface of the earth.

Journal of Applied Physics↗
USGS1965

Variational method of determining effective moduli of polycrystals: (A) hexagonal symmetry, (B) trigonal symmetry

Variational principles of anisotropic elasticity have been applied to aggregates of randomly oriented pure‐phase polycrystals having hexagonal symmetry and trigonal symmetry. The bounds of the effective elastic moduli obtained in this way show a considerable improvement over the bounds obtained by means of the Voigt and Reuss assumptions. The Hill average is found to be in most cases a good approximation when compared to the bounds found from the variational method. The new bounds reduce in their limits to the Voigt and Reuss values.

Journal of Applied Physics↗
USGS2010

Efficient estimators for adaptive stratified sequential sampling

In stratified sampling, methods for the allocation of effort among strata usually rely on some measure of within-stratum variance. If we do not have enough information about these variances, adaptive allocation can be used. In adaptive allocation designs, surveys are conducted in two phases. Information from the first phase is used to allocate the remaining units among the strata in the second phase. Brown et al . [ Adaptive two-stage sequential sampling , Popul. Ecol. 50 (2008), pp. 239–245] introduced an adaptive allocation sampling design – where the final sample size was random – and an unbiased estimator. Here, we derive an unbiased variance estimator for the design, and consider a related design where the final sample size is fixed. Having a fixed final sample size can make survey-planning easier. We introduce a biased Horvitz–Thompson type estimator and a biased sample mean type estimator for the sampling designs. We conduct two simulation studies on honey producers in Kurdistan and synthetic zirconium distribution in a region on the moon. Results show that the introduced estimators are more efficient than the available estimators for both variable and fixed sample size designs, and the conventional unbiased estimator of stratified simple random sampling design. In order to evaluate efficiencies of the introduced designs and their estimator furthermore, we first review some well-known adaptive allocation designs and compare their estimator with the introduced estimators. Simulation results show that the introduced estimators are more efficient than available estimators of these well-known adaptive allocation designs.

Journal of Statistical Computation and Simulation↗
USGS2011

Improved method for sectioning pectoral spines of catfish for age determination

A modified low-speed saw provided fast and precise sectioning of catfish pectoral spines for use in aging studies. In one hour, 10–15 spines can be sectioned, the sections mounted, and the annuli counted. Two methods commonly used to section ictalurid pectoral spines are (1) acid decalcification, followed by the use of a razor blade or microtome to slice the softened spines, and (2) cutting hard spines with electric saws. Decalcifying methods are time-consuming, and we had difficulty attaining the proper spine consistency for sectioning when we used decalcification techniques. Electric saws with toothed blades tended to obliterate the first-year annulus at the periphery of the central lumen on spines of channel catfish (Scholl 1968). A low speed saw equipped with two, thin parallel diamond blades was used to section fish fin rays and spines (Shepard and Nichy 1984), but drawbacks are that the preparation is time-consuming and the blades tend to warp. We used a low speed saw with a thick (0.3 mm), single blade for slicing the pectoral spines of brown bullheads ( Ictalurus nebulosus ) with fast, accurate and reproducible results. We also successfully sliced the pectoral spines of channel catfish ( Ictalurus punctatus ) and black bullhead ( Ictalurus melas ). The advantages of this method are: (1) spine sections are clear, with uniform thickness and little tissue damage; (2) no time-consuming procedures are necessary; (3) the original spine remains intact for future sectioning; and (4) the thick, single blade does not warp.

Journal of Freshwater Ecology↗
USGS2002

Effects of Photoperiod on Behavior and Courtship of the Neosho madtom (Noturus placidus)

To test effects of long and short day-length on behavior of the Neosho madtom ( Noturus placidus ), we held six pairs of fish in separate tanks under 16 hr (L): 8 hr (D) (long-day) and six pairs under 12 hr (L): 12 hr (D) (short-day) photoperiods. An ethogram was created and behavior was electronically and continuously recorded. Two-minute intervals for each hour over four 4-day periods were examined, and proportion of time active and performing specific behaviors in each tank was analyzed to compare differences between treatments. Individuals held under 16 L, 8 D were more active during the light cycle than those in 12 L, 12 D. Specific behaviors examined included resting, swimming, feeding, aggression, cavity enhancement, and courtship. A higher proportion of time was spent performing cavity enhancement, cavities were deeper, and gravel size in cavities was smaller for those fish in the long-day treatment. Throughout the experiment various courtship behaviors were observed in male-female pairs held in 16 L, 8 D, but no such behaviors were observed in 12L, 12D. The relationships between a long photoperiod and activity, cavity enhancement, and courtship behaviors illustrate the influence of photoperiod on the Neosho madtom reproductive cycle.

Journal of Freshwater Ecology↗
USGS2004

Fishes and habitat characteristics of the Keya Paha River, South Dakota-Nebraska

Fishes were collected in four mainstem reaches and eight tributary reaches in the Keya Paha River basin during May and June 2002. Most reaches were characteristically run habitats with sand substrates and riparian pastures. Data were combined with historical records to construct a basin-wide ichthyofaunal list which comprised 38 species from seven families. Dominant species were sand shiners ( Notropis ludibundus ; 47%), red shiners ( Cyprinella lutrensis ; 37%), and brassy minnows ( Hybognathus hankinsoni ; 8%). Dominant game species were bluegill ( Lepomis machrochirus ) and channel catfish ( Ictalurus punctatus ). We found one species previously listed as rare in South Dakota - plains topminnow ( Fundulus sciadicus ), and four species not previously found in the Keya Paha River - silver chub ( Macrhybopsis storeriana ), river carpsucker ( Carpiodes carpio ), northern pike ( Esox Indus ), yellow perch ( Perca flavescens ).

Nebraska, South Dakota↗