Search USGS⌕ Search

SEARCH · Search USGS

Results for “Journal of Geophysical Research- Solid Earth”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13Linked to original sources
USGS2012

Source complexity of the 1987 Whittier Narrows, California, earthquake from the inversion of strong motion records

Strong motion records for the Whittier Narrows earthquake are inverted to obtain the history of slip. Both constant rupture velocity models and variable rupture velocity models are considered. The results show a complex rupture process within a relatively small source volume, with at least four separate concentrations of slip. Two sources are associated with the hypocenter, the larger having a slip of 55–90 cm, depending on the rupture model. These sources have a radius of approximately 2–3 km and are ringed by a region of reduced slip. The aftershocks fall within this low slip annulus. Other sources with slips from 40 to 70 cm each ring the central source region and the aftershock pattern. All the sources are predominantly thrust, although some minor right-lateral strike-slip motion is seen. The overall dimensions of the Whittier earthquake from the strong motion inversions is 10 km long (along the strike) and 6 km wide (down the dip). The preferred dip is 30° and the preferred average rupture velocity is 2.5 km/s. Moment estimates range from 7.4 to 10.0×10 24 dyn cm, depending on the rupture model.

Journal of Geophysical Research Solid Earth↗
USGS2012

The relation of catastrophic flooding of Mangala Valles, Mars, to faulting of Memnonia Fossae and Tharsis volcanism

Detailed stratigraphic relations indicate two coeval periods of catastrophic flooding and Tharsis centered faulting (producing Memnonia Fossae) in the Mangala Valles region of Mars. Major sequences of lava flows of the Tharsis Montes Formation and local, lobate plains flows were erupted during and between these channeling and faulting episodes. First, Late Hesperian channel development overlapped in time the Tharsis-centered faulting that trends north 75° to 90°E. Next, Late Hesperian/Early Amazonian flooding was coeval with faulting that trends north 55° to 70°E. In some reaches, resistant lava flows filled the early channels, resulting in inverted channel topography after the later flooding swept through. Both floods likely originated from the same graben, which probably was activated during each episode of faulting. Faulting broke through groundwater barriers and tapped confined aquifers in higher regions west and east of the point of discharge. The minimum volume of water required to erode Mangala Valles (about 5×10 12 m 3 ) may have been released through two floods that drained a few percent pore volume from a relatively permeable aquifer. The peak discharges of the floods may have lasted from days to weeks. The perched water discharged from the aquifer may have been produced by hydrothermal groundwater circulation induced by Tharsis magmatism, tectonic uplift centered at Tharsis Montes, and compaction of saturated crater ejecta due to loading by lava flows.

Journal of Geophysical Research Solid Earth↗
USGS2012

Some additional observations on inclusions in the granitic rocks of the Sierra Nevada

Microgranular quartz diorite and diorite inclusions are widespread in central Sierra Nevada granitoid rocks and are almost exclusively restricted to hornblende-bearing rocks, most commonly felsic tonalites and mafic granodiorites. Strontium 87/strontium 86 values of the inclusions and host granitoids from individual plutons generally plot on single isochrons that agree closely with previously determined ages. Neodymium 143/neodymium 144 values of five inclusions ranged from 0.51229 to 0.51248 and yield ε Nd values that correlate closely with values of their respective hosts. The Nd-Sm and Rb-Sr systematics indicate that most inclusions were in isotopic equilibrium with enclosing materials at the time of formation. Silica contents of inclusions and granitoids are contiguous, but inclusions generally contain less than, and granitoids more than, 60% SiO 2 . Linear continuity of the femic oxide and H 2 O + trends relative to SiO 2 suggests many inclusions formed as concentrations of hydrous mafic minerals. Variation of other major element oxides and trace elements support this inference. The aforementioned data are generally inconsistent with a direct genetic link between the mafic inclusions and the mantle-derived basalt. However, many initial Sierra Nevada magmas were produced by mixing of mafic, mantle-derived melts and felsic crustal materials, resulting in isotopically varied tonalitic and granodioritic magmas. Most inclusions thus represent fragmented crystal accumulations of early-formed, near-liquidus minerals generated from these previously mixed magmas.

Journal of Geophysical Research Solid Earth↗
USGS2012

Paleomagnetic rotations and the Cenozoic tectonics of the Cascade Arc, Washington, Oregon, and California

Paleomagnetic results from Cenozoic (62–12 Ma) volcanic rocks of the Cascade arc and adjacent areas indicate that moderate to large clockwise rotations are an important component of the tectonic history of the arc. Two mechanisms of rotation are suggested by the regional pattern of paleomagnetic rotations. The progressive increase in rotation toward the coast in arc and forearc rocks results from distributed dextral shear, which is likely driven by oblique subduction of oceanic plates to the west. Simple shear rotation is accommodated in the upper crust by strike-slip faulting. The right-lateral Mount St. Helens seismic zone may be an active manifestation of this process. Dextral shear probably obscures a subequal contribution to arc and forearc rotation that is driven by intraarc or backarc extension. This rotation is suggested by the average southward increase in continental margin rotations into the region outboard of the Basin and Range. The southward increase in rotation parallels a change in the arc tectonic regime from largely compressional in northern Washington to extensional in Oregon. Concomitant with this change is a southward increase in the volume of eruptive rocks and the number of basaltic vents in the arc. A progressive eastward shift of the arc volcanic front with time in the rotated arc terrane is the result of the westward pivoting of the arc block in front of a zone of extension since Eocene time. Westward migration of bimodal Basin and Range volcanism since at least 16 Ma is tracking westward rotation of the frontal arc block and growth of the Basin and Range in its wake.

Journal of Geophysical Research Solid Earth↗
USGS2012

Geophysical constraints on Washington convergent margin structure

Gravity and magnetic maps of western Washington reveal the lateral structure and fabric of the Washington Coast Range, Puget Basin, and southern Washington Cascade Range. The magnetic and gravity maps show large amplitude positive anomalies associated with the shallow but largely buried section of Washington Coast Range mafic rocks which are separated by negative anomalies over deep sedimentary basins. The positive anomalies indicate that the Coast Range mafic basement extends farther east than previously thought, at least as far east as the longitude of Seattle. Linear and steep gravity and magnetic gradients indicate many unmapped, often buried faults in the Washington Coast Range Province. Magnetic highs are also associated with mapped batholiths in the Cascade arc. Several magnetic highs observed east of the Coast Range rocks and west of these batholiths may be associated with buried Tertiary plutons or ophiolites. Two-dimensional gravity and magnetic modeling constrained with geological and other geophysical data indicate that the Coast Range Province rocks are about 1 km thick at the coast, thickening to as much as 30 km near their postulated eastern edge. A maximum boundary on the average density of the upper 15–20 km of the rocks that compose the Coast Range Province of 2920 kg/m 3 was established by the modeling, suggesting a composition largely of basalt and gabbro with little interbedded sediments. Under these rocks may be mantle or a subduction complex composed of dense mafic, ultramafic, and sedimentary rocks like that proposed to underlie Vancouver Island. Previous gravity models of the Washington margin include lower densities for the proposed subduction complex than for Vancouver Island, suggesting a lower component of mafic and ultramafic rocks than the rocks underlying Vancouver Island. However, my Washington model requires that the proposed subduction complex be more dense than the trench sediments and, therefore, that material denser than sediments be incorporated within it. The absence of continental mantle and the modeled wedge shape of the Coast Range Province upper crust suggest that erosion of the bottom of the overriding plate by subduction processes may have occurred.

Washington↗
USGS2012

Stratigraphic, lithologic, and major element geochemical constraints on magmatic evolution at Lassen volcanic center, California

The Lassen volcanic center is the most recent of several long-lived volcanic centers in the southernmost Cascade Range. These centers have erupted products ranging from basaltic andesite to rhyolite and are superimposed on a background of regional basaltic to andesitic volcanism. The evolution of the Lassen volcanic center is described in three stages. Stages I and II comprise the Brokeoff volcano, and 80 km 3 andesitic stratocone, active from 600 to 400 ka. Brokeoff volcano is compositionally equivalent to the regional basaltic andesite to andesite volcanism in the Lassen region and is the result of structurally controlled focusing of the diffuse regional mafic magmatism. Stage III comprises a silicic dome field and adjacent area of hybrid andesites and has a total volume of about 100 km 3 . Volcanism during stage III was episodic and is subdivided into four sequences of lithologically and temporally distinct lavas. Stage III began at 400 ka with a rhyolitic, caldera-forming pyroclastic eruption and chemically related lavas. Additional sequences of dacite erupted between 250–200 ka and 100–0 ka. Hybrid andesites erupted adjacent to the silicic dome field between 300 and 0 ka. Porphyritic andesite and dacite with high Al 2 O 3 , low TiO 2 , medium K 2 O and FeO/MgO ratios of 1.5–2.0 are the most abundant rock types in the Lassen volcanic center. However, the single most voluminous unit is sparsely phyric rhyolite pumice. In general, the lavas of Lassen volcanic center form a single coherent trend on major element variation diagrams and in pseudo-quaternary phase space, consistant with an origin either by fractional crystallization or magma mixing. In detail, however, the lack of systematic temporal change in silica and subtly crossing trends indicate a complex origin. A variety of statistically successful fractional crystallization models can be constructed that derive Brokeoff andesites from regional magmas. An important conclusion of the modeling is that if fractional crystallization is the process responsible for generation of Brokeoff andesite, then the parent magma must be low to medium K in geochemical affinity in order to explain the variation in K 2 O. However, although major element variation can be modeled by fractional crystallization, petrographic and stratigraphic evidence indicates that magma mixing is an important but subtle process in Brokeoff lavas and suggests that lavas evolved in small independent batches. Lavas erupted during stage III, while predominantly silicic, range from 53 to 75% SiO 2 . Disequilibrium mineral assemblages in the stage III lavas indicate that they are not directly derived from Brokeoff andesite by fractional crystallization. Mixing of silicic magma with regional mafic magma and disaggregation of andesitic quenched magmatic inclusions play dominant roles in the compositional diversity of stage III lavas.

Journal of Geophysical Research Solid Earth↗
USGS2012

Comparison of ground motion from tremors and explosions in deep gold mines

Seismic body waves, from tamped chemical explosions, two with yields of 50 and one of 150 kg, were compared with corresponding data from three mining-induced tremors with a view to testing methods of discriminating between the two types of events. Detonated at depths of about 2 km, all three explosions generated P waves for which the low-frequency spectral asymptotes agree well with corresponding results scaled down from nuclear shots at the Nevada Test Site. For the two smaller explosions, recorded underground at hypocentral distances ranging from 234 to 871 m, the P wave corner frequencies, defined by the intersections of the low- and high-frequency asymptotes, are also in fine agreement with scaled-down results from the Nevada Test Site; for the 150-kg explosion, which was recorded only at the surface, it appears that 2.39 km of upward propagation caused the corner frequency to be at least a factor of 4 lower than anticipated due to attenuation. All three explosions generated S waves that appear to be a consequence of deviatoric stress release in the immediate environs of the explosions. The three tremors analyzed here generated P and S waves whose spectra and source parameters agree well with standard earthquake source models. With regard to discrimination based on P wave spectra, we conclude that for events of fixed low-frequency spectral asymptotes, the explosions typically have higher corner frequencies than tremors or earthquakes, although counterexamples certainly exist. Interestingly, the 150-kg explosion was identified as such on the basis of P and S wave polarities that are incompatible with the normally expected double-couple source model; instead, these initial motions are consistent with an explosion in conjunction with normal faulting. The body wave spectra of this explosion and those of a nearby tremor, however, were indistinguishable.

Journal of Geophysical Research Solid Earth↗
USGS2012

Infragravity waves over a natural barred profile

Measurements of cross-shore flow were made across the surf zone during a storm as a nearshore bar became better developed and migrated offshore. Measured infragravity band spectra were compared to synthetic spectra calculated numerically over the natural barred profile assuming a white run-up spectrum of leaky mode or high-mode edge waves. As in earlier studies, the spectra compared closely; however, for some frequencies the energy of the measured spectrum exceeded the energy of the synthetic spectrum, suggesting that the run-up spectrum was not white but had dominating frequencies. Utilizing cross-shore flow data and synthetic spectra from a number of cross-shore locations, an equivalent run-up spectrum was calculated for each day. On the first day of the storm, the equivalent run-up spectrum indicated a dominant wave that had a node in velocity reasonably close to the bar crest. Later during the storm, when the bar had migrated farther offshore, there was no evidence for a dominant motion having a velocity node at the bar crest. The structure of the equivalent run-up spectrum compared well with spectra of direct measurements of run-up obtained several hundred meters away. We have no clear evidence in support of the theory that infragravity waves might form or force the offshore migration of a bar. To confirm this finding, longer records obtained synoptically over a developing bar are required. The dominant wave observed early in the storm was consistent with Symond and Bowen's (1984) theoretical prediction of resonant amplification of discrete frequencies over a barred profile.

Journal of Geophysical Research Solid Earth↗
USGS2012

Effect of crustal layering upon dislocation modeling

Slip distribution at depth on a fault may be inferred from the deformation observed on the surface. In inverting the surface deformation data to obtain the slip distribution, the Earth is generally approximated by an elastic half‐space. Slip distributions inferred from a half‐space model may contain artifacts, including zones of reversed slip, due solely to effects of layering in the real Earth. This effect is demonstrated for a vertical strike‐slip fault in an Earth consisting of an elastic layer overlying an elastic half‐space. Slip on the fault is taken to be independent of the along‐strike coordinate (i.e., antiplane strain is assumed). For a given slip distribution in this model the slip distribution on a similar fault in an elastic half‐space is found that produces the identical surface deformation. Comparison of the two slip distributions reveals structure introduced into the half‐space equivalent slip profile by crustal layering. The comparisons suggest that low‐resolution inversion schemes (e.g., single screw dislocation models) are not drastically affected by Earth structure, but attempts at detailed inversion are likely to produce profiles contaminated by artifacts of Earth structure.

Journal of Geophysical Research B: Solid Earth↗
USGS1996

A migratory mantle plume on Venus: Implications for Earth?

A spatially fixed or at least internally rigid hotspot reference frame has been assumed for determining relative plate motions on Earth. Recent 1:5,000,000 scale mapping of Venus, a planet without terrestrial-style plate tectonics and ocean cover, reveals a systematic age and dimensional progression of corona-like arachnoids occurring in an uncinate chain. The nonrandom associations between arachnoids indicate they likely formed from a deep-seated mantle plume in a manner similar to terrestrial hotspot features. However, absence of expected convergent "plate" margin deformation suggests that the arachnoids are the surface expression of a migratory mantle plume beneath a stationary surface. If mantle plumes are not stationary on Venus, what if any are the implications for Earth?

Journal of Geophysical Research B: Solid Earth↗
USGS2001

Resolution analysis of finite fault source inversion using one- and three-dimensional Green's functions 1. Strong motions

We develop a methodology to perform finite fault source inversions from strong motion data using Green's functions (GFs) calculated for a three-dimensional (3-D) velocity structure. The 3-D GFs are calculated numerically by inserting body forces at each of the strong motion sites and then recording the resulting strains along the target fault surface. Using reciprocity, these GFs can be recombined to represent the ground motion at each site for any (heterogeneous) slip distribution on the fault. The reciprocal formulation significantly reduces the required number of 3-D finite difference computations to at most 3NS, where NS is the number of strong motion sites used in the inversion. Using controlled numerical resolution tests, we have examined the relative importance of accurate GFs for finite fault source inversions which rely on near-source ground motions. These experiments use both 1-D and 3-D GFs in inversions for hypothetical rupture models in order (1) to analyze the ability of the 3-D methodology to resolve trade-offs between complex source phenomena and 3-D path effects, (2) to address the sensitivity of the inversion results to uncertainties in the 3-D velocity structure, and (3) to test the adequacy of the 1-D GF method when propagation effects are known to be three-dimensional. We find that given "data" from a prescribed 3-D Earth structure, the use of well-calibrated 3-D GFs in the inversion provides very good resolution of the assumed slip distribution, thus adequately separating source and 3-D propagation effects. In contrast, using a set of inexact 3-D GFs or a set of hybrid 1-D GFs allows only partial recovery of the slip distribution. These findings suggest that in regions of complex geology the use of well-calibrated 3-D GFs has the potential for increased resolution of the rupture process relative to 1-D GFs. However, realizing this full potential requires that the 3-D velocity model and associated GFs should be carefully validated against the true 3-D Earth structure before performing the inverse problem with actual data.

Journal of Geophysical Research B: Solid Earth↗
USGS1996

Geyser periodicity and the response of geysers to deformation

Numerical simulations of multiphase fluid and heat transport through a porous medium define combinations of rock properties and boundary conditions which lead to geyser‐like periodic discharge. Within the rather narrow range of conditions that allow geyser‐like behavior, eruption frequency and discharge are highly sensitive to the intrinsic permeabilities of the geyser conduit and the surrounding rock matrix, to the relative permeability functions assumed, and to pressure gradients in the matrix. In theory, heat pipes (concomitant upward flow of steam and downward flow of liquid) can exist under similar conditions, but our simulations suggest that the periodic solution is more stable. Simulated time series of geyser discharge are chaotic, but integrated quantities such as eruption frequency and mass discharge per eruption are free of chaos. These results may explain the observed sensitivity of natural geysers to small strains such as those caused by remote earthquakes, if ground motion is sufficient to induce permeability changes. Changes in geyser behavior caused by minor preseismic deformation, periodic surface loading, and Earth tides are more difficult to explain in the context of our current model.

Journal of Geophysical Research B: Solid Earth↗
USGS2001

Resolution analysis of finite fault source inversion using one- and three-dimensional Green's functions 2. Combining seismic and geodetic data

Using numerical tests for a prescribed heterogeneous earthquake slip distribution, we examine the importance of accurate Green's functions (GF) for finite fault source inversions which rely on coseismic GPS displacements and leveling line uplift alone and in combination with near-source strong ground motions. The static displacements, while sensitive to the three-dimensional (3-D) structure, are less so than seismic waveforms and thus are an important contribution, particularly when used in conjunction with waveform inversions. For numerical tests of an earthquake source and data distribution modeled after the 1994 Northridge earthquake, a joint geodetic and seismic inversion allows for reasonable recovery of the heterogeneous slip distribution on the fault. In contrast, inaccurate 3-D GFs or multiple 1-D GFs allow only partial recovery of the slip distribution given strong motion data alone. Likewise, using just the GPS and leveling line data requires significant smoothing for inversion stability, and hence, only a blurred vision of the prescribed slip is recovered. Although the half-space approximation for computing the surface static deformation field is no longer justifiable based on the high level of accuracy for current GPS data acquisition and the computed differences between 3-D and half-space surface displacements, a layered 1-D approximation to 3-D Earth structure provides adequate representation of the surface displacement field. However, even with the half-space approximation, geodetic data can provide additional slip resolution in the joint seismic and geodetic inversion provided a priori fault location and geometry are correct. Nevertheless, the sensitivity of the static displacements to the Earth structure begs caution for interpretation of surface displacements, particularly those recorded at monuments located in or near basin environments.

Journal of Geophysical Research B: Solid Earth↗
USGS1996

Mapping playa evaporite minerals and associated sediments in Death Valley, California, with multispectral thermal infrared images

Efflorescent salt crusts and associated sediments in Death Valley, California, were studied with remote-sensing data acquired by the NASA thermal infrared multispectral scanner (TIMS). Nine spectral classes that represent a variety of surface materials were distinguished, including several classes that reflect important aspects of the playa groundwater chemistry and hydrology. Evaporite crusts containing abundant thenardite (sodium sulfate) were mapped along the northern and eastern margins of the Cottonball Basin, areas where the inflow waters are rich in sodium. Gypsum (calcium sulfate) crusts were more common in the Badwater Basin, particularly near springs associated with calcic groundwaters along the western basin margin. Evaporite-rich crusts generally marked areas where groundwater is periodically near the surface and thus able to replenish the crusts though capillary evaporation. Detrital silicate minerals were prevalent in other parts of the salt pan where shallow groundwater does not affect the surface composition. The surface features in Death Valley change in response to climatic variations on several different timescales. For example, salt crusts on low-lying mudflats form and redissolve during seasonal-to-interannual cycles of wetting and desiccation. In contrast, recent flooding and erosion of rough-salt surfaces in Death Valley probably reflect increased regional precipitation spanning several decades. Remote-sensing observations of playas can provide a means for monitoring changes in evaporite facies and for better understanding the associated climatic processes. At present, such studies are limited by the availability of suitable airborne scanner data. However, with the launch of the Earth Observing System (EOS) AM-1 Platform in 1998, multispectral visible/near-infrared and thermal infrared remote-sensing data will become globally available.

Journal of Geophysical Research B: Solid Earth↗
USGS1998

CRUST 5.1: A global crustal model at 5° x 5°

We present a new global model for the Earth's crust based on seismic refraction data published in the period 1948-1995 and a detailed compilation of ice and sediment thickness. An extensive compilation of seismic refraction measurements has been used to determine the crustal structure on continents and their margins. Oceanic crust is modeled with both a standard model for normal oceanic crust, and variants for nonstandard regions, such as oceanic plateaus. Our model (CRUST 5.1) consists of 2592 5° × 5° tiles in which the crust and uppermost mantle are described by eight layers: (1) ice, (2) water, (3) soft sediments, (4) hard sediments, (5) crystalline upper, (6) middle, (7) lower crust, and (8) uppermost mantle. Topography and bathymetry are adopted from a Mandard database (ETOPO-5). Compressional wave velocity in each layer is based on field measurements, and shear wave velocity and density are estimated using recently published empirical V p -V s and V p -density relationships. The crustal model differs from previous models in that (1) the thickness and seismic/density structure of sedimentary basins is accounted for more completely, (2) the velocity structure of unmeasured regions is estimated using statistical averages that are based on a significantly larger database of crustal structure, (3) the compressional wave, shear wave, and density structure have been explicitly specified using newly available constraints from field and laboratory studies. Thus - this global crustal model is based on substantially more data than previous models and differs from them in many important respects. A new map of the thickness of the Earth's crust is presented, and we illustrate the application of this model by using it to provide the crustal correction for surface wave phase velocity maps. Love waves at 40 s are dominantly sensitive to crustal structure, and there is a very close correspondence between observed phase velocities at this period and those predicted by CRUST 5.1. We find that the application of crustal corrections to long-period (167 s) Rayleigh waves significantly increases the variance in the phase velocity maps and strengthens the upper mantle , velocity anomalies beneath stable continental regions. A simple calculation of crustal isostacy indicates significant lateral variations in upper mantle density. The model CRUST 5.1 provides a complete description of the physical properties of the Earth's crust at a scale of 5° × 5° and can be used for a wide range of seismological and nonseismological problems.

Journal of Geophysical Research B: Solid Earth↗
USGS2003

Apparent break in earthquake scaling due to path and site effects on deep borehole recordings

We reexamine the scaling of stress drop and apparent stress, rigidity times the ratio between seismically radiated energy to seismic moment, with earthquake size for a set of microearthquakes recorded in a deep borehole in Long Valley, California. In the first set of calculations, we assume a constant Q and solve for the corner frequency and seismic moment. In the second set of calculations, we model the spectral ratio of nearby events to determine the same quantities. We find that the spectral ratio technique, which can account for path and site effects or nonconstant Q, yields higher stress drops, particularly for the smaller events in the data set. The measurements determined from spectral ratios indicate no departure from constant stress drop scaling down to the smallest events in our data set (Mw 0.8). Our results indicate that propagation effects can contaminate measurements of source parameters even in the relatively clean recording environment of a deep borehole, just as they do at the Earth's surface. The scaling of source properties of microearthquakes made from deep borehole recordings may need to be reevaluated.

Journal of Geophysical Research B: Solid Earth↗
USGS2000

Geochemical evidence for a magmatic CO 2 degassing event at Mammoth Mountain, California, September-December 1997

Recent time series soil CO 2 concentration data from monitoring stations in the vicinity of Mammoth Mountain, California, reveal strong evidence for a magmatic degassing event during the fall of 1997 lasting more than 2 months. Two sensors at Horseshoe Lake first recorded the episode on September 23, 1997, followed 10 days later by a sensor on the north flank of Mammoth Mountain. Direct degassing from shallow intruding magma seems an implausible cause of the degassing event, since the gas released at Horseshoe Lake continued to be cold and barren of other magmatic gases, except for He. We suggest that an increase in compressional strain on the area south of Mammoth Mountain driven by movement of major fault blocks in Long Valley caldera may have triggered an episode of increased degassing by squeezing additional accumulated CO 2 from a shallow gas reservoir to the surface along faults and other structures where it could be detected by the CO 2 monitoring network. Recharge of the gas reservoir by CO 2 emanating from the deep intrusions that probably triggered deep long-period earthquakes may also have contributed to the degassing event. The nature of CO 2 discharge at the soil-air interface is influenced by the porous character of High Sierra soils and by meteorological processes. Solar insolation is the primary source of energy for the Earth atmosphere and plays a significant role in most diurnal processes at the Earth surface. Data from this study suggest that external forcing due largely to local orographic winds influences the fine structure of the recorded CO 2 signals.

California↗
USGS2012

An aeromagnetic study of Mount St. Helens

Aeromagnetic data from surveys flown by the U.S. Geological Survey over Mount St. Helens, Washington, before and after the climactic May 18, 1980, eruption were used to determine the bulk magnetic properties of the volcano and to delineate a buried source. We assumed that most of the edifice of preeruption and posteruption Mount St. Helens has a magnetization direction near the present earth's field of 69° inclination and 20° declination and calculated its intensity as 4.1 A/m. After subtraction of magnetic anomalies due to topogaphy magnetized with this direction and intensity, the preeruption and posteruption surveys revealed nearly identical residual magnetic highs and lows, indicative that their sources were not altered or removed by the May 1980 eruption. The residual highs were explained by a 200-m-deep source lying mostly within the edifice of Mount St. Helens. The source could be terrain that predates Mount St. Helens, such as a buried ridge or a cone or a valley filled with lava. We calculated the magnetization of the material removed by the May 1980 eruption and found its intensity to be 4.2 A/m in a direction near the present earth's field, similar to that assumed for the volcano as a whole. This similar result confirmed the validity of the magnetization vector assumed for the entire edifice.

Washington↗