Search USGS⌕ Search

SEARCH · Search USGS

Results for “Geological Journal”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13Linked to original sources
USGS1991

Superposed deposits of thick coal on the eastern edge of the Illinois Basin and their association with underlying geologic features

Comparison of maps produced from publicly available data (drillers' logs, electrical logs and mine maps) provides a basis for inferring a deep-seated influence on the distribution of superposed deposits of thick coal (>1.4 m) in four Middle Pennsylvania (Desmoinesian Series) coal beds in three mining districts of west-central Indiana. Thick sandstone (>18 m) is common in areas between and around the mining districts, but less than 3 percent of the study area (consisting of 3200 km 2 ) is underlain by both thick coal and thick sandstone. Only thick sandstone associated with the Survant Coal Member (Linton Formation), and informally referred to by us “Survant sandstone”, exists in all of the thin-coal areas. After comparison with published maps by other authors, it is inferred that distribution of the Survant sandstone, which was deposited immediately after a long period of slow deposition associated with the Colchester Coal Member (Linton Formation), may reflect topographic expression of long-term subsidence associated with differential thinning of much deeper Silurian strata (580 m below). Although the findings of this study provide the basis for a conceptual geologic model with a hypothetical structure that is amenable to statistical testing, such analysis should be undertaken only after the data are analyzed for randomness, spatial autocorrelation, linearity and normality.

International Journal of Coal Geology↗
USGS2008

Methanogenic pathways of coal-bed gas in the Powder River Basin, United States: The geologic factor

Coal-bed gas of the Tertiary Fort Union and Wasatch Formations in the Powder River Basin in Wyoming and Montana, U.S. was interpreted as microbial in origin by previous studies based on limited data on the gas and water composition and isotopes associated with the coal beds. To fully evaluate the microbial origin of the gas and mechanisms of methane generation, additional data for 165 gas and water samples from 7 different coal-bed methane-bearing coal-bed reservoirs were collected basinwide and correlated to the coal geology and stratigraphy. The C1/(C2 + C3) ratio and vitrinite reflectance of coal and organic shale permitted differentiation between microbial gas and transitional thermogenic gas in the central part of the basin. Analyses of methane ??13C and ??D, carbon dioxide ??13C, and water ??D values indicate gas was generated primarily from microbial CO2 reduction, but with significant gas generated by microbial methyl-type fermentation (aceticlastic) in some areas of the basin. Microbial CO2 reduction occurs basinwide, but is generally dominant in Paleocene Fort Union Formation coals in the central part of the basin, whereas microbial methyl-type fermentation is common along the northwest and east margins. Isotopically light methane ??13C is distributed along the basin margins where ??D is also depleted, indicating that both CO2-reduction and methyl-type fermentation pathways played major roles in gas generation, but gas from the latter pathway overprinted gas from the former pathway. More specifically, along the northwest basin margin gas generation by methyl-type fermentation may have been stimulated by late-stage infiltration of groundwater recharge from clinker areas, which flowed through highly fractured and faulted coal aquifers. Also, groundwater recharge controlled a change in gas composition in the shallow Eocene Wasatch Formation with the increase of nitrogen and decrease of methane composition of the coal-bed gas. Other geologic factors, such as burial, thermal and maturation history, lateral and vertical continuity, and coalification of the coal beds, also played a significant role in controlling methanogenic pathways and provided new perspectives on gas evolution and emplacement. The early-stage gas produced by CO2 reduction has mixed with transitional thermogenic gas in the deeper, central parts of the Powder River Basin to form 'old' gas, whereas along the basin margins the overprint of gas from methyl-type fermentation represents 'new' gas. Thus, a clear understanding of these geologic factors is necessary to relate the microbiological, biogeochemical, and hydrological processes involved in the generation of coal-bed gas.

International Journal of Coal Geology↗
USGS2003

Coalbed gas in the Mecsek Basin, Hungary

Information about the presence and recovery of coalbed gas during underground mining and attempts to recover the gas as an energy source, plus new data about gas storage capacity, petrography, maturity, and other coal quality factors, indicate that the coals of the Mecsek Basin may contain large quantities of coalbed gas that is largely methane. Two preliminary estimates of the total gas content of the coalfield are 0.28e+11 m3 (almost 1 trillion cubic feet) and 1.13e+11 m3 (nearly 4 trillion cubic feet). Although much more information is needed about gas contents, permeabilities and other reservoir factors, the available geologic information may be sufficient to identify target areas for exploration. Efforts required to evaluate production potential are warranted. ?? 2003 Elsevier Science B.V. All rights reserved.

International Journal of Coal Geology↗
USGS2003

Probabilistic assessment methodology for continuous-type petroleum accumulations

The analytic resource assessment method, called ACCESS (Analytic Cell-based Continuous Energy Spreadsheet System), was developed to calculate estimates of petroleum resources for the geologic assessment model, called FORSPAN, in continuous-type petroleum accumulations. The ACCESS method is based upon mathematical equations derived from probability theory in the form of a computer spreadsheet system. ?? 2003 Elsevier B.V. All rights reserved.

International Journal of Coal Geology↗
USGS1946

Geology and nickel mineralization of the Julian-Cuyamaca area, San Diego County, California

The Julian-Cuyamaca area is in the San Diego Mountains, one of the Peninsular Ranges of southern California. It lies in San Diego County, about 3 miles south of Julian, and approximately 60 miles northeast of San Diego. The area was mapped, and its nickel mineralization studied, from March to June, 1944; the work was part of the U. S. Geological Survey's program of strategic mineral investigations.

California↗
USGS2018

Using geologic structures to constrain constitutive laws not accessible in the laboratory

In this essay, we explore a central problem of structural geology today, and in the foreseeable future, which is the determination of constitutive laws governing rock deformation to produce geologic structures. Although laboratory experiments provide much needed data and insights about constitutive laws, these experiments cannot cover the range of conditions and compositions relevant to the formation of geologic structures. We advocate that structural geologists address this limitation by interpreting natural experiments, documented with field and microstructural data, using continuum mechanical models that enable the deduction of constitutive laws. To put this procedure into a historical context, we review the founding of structural geology by James Hutton in the late 18th century, and the seminal contributions to continuum mechanics from Newton to Cauchy that provide the tools to model geologic structures. The procedure is illustrated with two examples drawn from recent and on-going field investigations of crustal and mantle lithologies . We conclude by pointing to future research opportunities that will engage structural geologists in the pursuit of constitutive laws during the 21st century.

Journal of Structural Geology↗
USGS2003

Calculation of Estimated Ultimate Recovery for wells in continuous-type oil and gas accumulations of the Uinta-Piceance Province

The calculation of Estimated Ultimate Recovery (EUR) from oil and gas production data of individual wells and the development of EUR distributions from all producing wells in an assessment unit are important steps in the quantitative assessment of continuous-type hydrocarbon resources. The U.S. Geological Survey has developed a method of calculating EURs for wells in continuous-type accumulations, including coal-bed gas accumulations. The EUR distribution of producing wells is used as a guide for the estimation of an EUR distribution for potential wells in areas of undiscovered resources. ?? 2003 Elsevier B.V. All rights reserved.

International Journal of Coal Geology↗
USGS1997

Reports and maps of the Military Geology Unit, 1942-1975

Included here are reports and maps which were prepared in the Military Geology Unit of the U. S. Geological Survey from 1942 through 1975. In addition to the references prepared primarily for military use and listed here, more than 200 reports of more general geologic interest were prepared for publication as Survey bulletins and professional papers and in outside journals. These reports are listed in "Publications of the Geological Survey" and other bibliographies. Military Geology reports generally include basic subjects such as rock types, soils, water resources, landforms and vegetation, as well as interpretive subjects such as suitability of terrain for cross-country movement and for construction of roads and airfields in areas throughout the world. Reports on specific areas range from generalized texts with small scab maps derived from published sources to detailed texts with large-scale maps commonly based on photo-interpretation and, especially for Alaska and western Pacific islands, involving field mapping. Other reports treat topics of interest in military geology without reference to specific areas. A number of reports covering the moon include the first photogeologic map of the near side. Authors are cited for some kinds of reports; however, many intelligence reports were published anonymously. Most of the reports were prepared by teams made up mainly of geologists but commonly including soils scientists, botanists, climatologists and geographers. Nearly all the soil scientists and climatologists were members of the World Soil Geography Unit, Soil Survey, Soil Conservation Service, U. S. Department of Agriculture. Manuscripts from this Unit were passed through a common review and other processing, as were the manuscripts originating in the Military Geology office, to be issued under the aegis of the latter. In some instances where it has not been possible to list all authors, names of project supervisors are given. File copies of many of the Military Geology reports prepared since 1975 are kept in the Special Geologic Studies Group, U.S. Geological Survey, National Center, Reston, and may be examined there by appropriately cleared persons. Additionally, copies of many of the unclassified studies are in the U.S. Geological Survey Library. Some of the older reports are in the files of the Terrain Analysis Center, Fort Belvoir, Virginia, and other offices within the Corps of Engineers. Most of the reports are out of print and many of the other studies are no longer available.

Open-File Report↗
USGS1996

Geologic framework for the coal-bearing rocks of the Central Appalachian Basin

Coal production has been an important economic factor in the Central Appalachian Basin. However, regional stratigraphic and structural relationships of the coal-bearing rocks of the basin have been poorly understood due to numerous separate nomenclatural schemes employed by various states. In order to estimate coal resources and understand mechanisms controlling the distribution of coal within the basin, a reliable geologic framework is necessary. Seven detailed cross sections across the Central Appalachian Basin were constructed in order to examine the stratigraphic and structural framework of the coal-bearing rocks in the basin. The cross sections were based on more than 1000 oil and gas well logs, measured sections, and borehole information from Kentucky, Ohio, Tennessee, Virginia and West Virginia.

International Journal of Coal Geology↗
USGS2014

Application of near-surface geophysics as part of a hydrologic study of a subsurface drip irrigation system along the Powder River floodplain near Arvada, Wyoming

Rapid development of coalbed natural gas (CBNG) production in the Powder River Basin (PRB) of Wyoming has occurred since 1997. National attention related to CBNG development has focused on produced water management, which is the single largest cost for on-shore domestic producers. Low-cost treatment technologies allow operators to reduce their disposal costs, provide treated water for beneficial use, and stimulate oil and gas production by small operators. Subsurface drip irrigation (SDI) systems are one potential treatment option that allows for increased CBNG production by providing a beneficial use for the produced water in farmland irrigation. Water management practices in the development of CBNG in Wyoming have been aided by integrated geophysical, geochemical, and hydrologic studies of both the disposal and utilization of water. The U.S. Department of Energy (DOE) National Energy Technology Laboratory (NETL) and the U.S. Geological Survey (USGS) have utilized multi-frequency airborne, ground, and borehole electromagnetic (EM) and ground resistivity methods to characterize the near-surface hydrogeology in areas of produced water disposal. These surveys provide near-surface EM data that can be compared with results of previous surveys to monitor changes in soils and local hydrology over time as the produced water is discharged through SDI. The focus of this investigation is the Headgate Draw SDI site, situated adjacent to the Powder River near the confluence of a major tributary, Crazy Woman Creek, in Johnson County, Wyoming. The SDI system was installed during the summer of 2008 and began operation in October of 2008. Ground, borehole, and helicopter electromagnetic (HEM) conductivity surveys were conducted at the site prior to the installation of the SDI system. After the installation of the subsurface drip irrigation system, ground EM surveys have been performed quarterly (weather permitting). The geophysical surveys map the heterogeneity of the near-surface geology and hydrology of the study area. The geophysical data are consistent between surveys using different techniques and between surveys carried out at different times from 2007 through 2011. This paper summarizes geophysical results from the 4-year monitoring study of the SDI system.

Wyoming↗
USGS2005

The World Coal Quality Inventory: A status report

National and international policy makers and industry require accurate information on coal, including coal quality data, to make informed decisions regarding international import needs and export opportunities, foreign policy, technology transfer policies, foreign investment prospects, environmental and health assessments, and byproduct use and disposal issues. Unfortunately, the information needed is generally proprietary and does not exist in the public domain. The U.S. Geological Survey (USGS), in conjunction with partners in about 60 countries, is developing a digital compilation of worldwide coal quality. The World Coal Quality Inventory (WoCQI) will contain coal quality information for samples obtained from major coal beds in countries having significant coal production, as well as from many countries producing smaller volumes of coal, with an emphasis on coals currently being burned. The information that will be incorporated includes, but is not limited to, proximate and ultimate analyses; sulfur-form data; major, minor, and trace element analysis; and semi-quantitative analyses of minerals, modes of occurrence, and petrography. The coal quality information will eventually be linked to a Geographic Information System (GIS) that shows the coal basins and sample locations along with geologic, land use, transportation, industrial, and cultural information. The WoCQI will be accessible on the USGS web page and new data added periodically. This multi-national collaboration is developing global coal quality data that contain a broad array of technologic, economic, and environmental parameters, which should help to ensure the efficient and environmentally compatible use of global coal resources in the 21st century.

International Journal of Coal Geology↗
USGS1999

Sulfur variability and petrology of the Lower Block Coal Member (Pennsylvanian) in Southwest Indiana

The Lower Block Coal Member (Pennsylvanian-Atokan, Westphalian C) is an economic low-to medium-sulfur, low-ash coal resource in the Illinois Basin. Sulfur content is generally low (averaging 1.0%) in the study area, but varies over short distances. Higher sulfur areas occur as isolated pods and epigenetic pyrite increases significantly in the upper third of the selected columns in higher sulfur areas. Sulfur variations cannot be predicted by typical geologic characteristics such as roof lithology, seam thickness, or seam elevation. Petrographic analysis shows that pyrite is generally associated with brighter microlithotypes, except in higher sulfur areas where infilling pyrite forms are associated with inertite. Higher sulfur areas reflect the water chemistry of the paleomire during and shortly after peat accumulation. Locally, abundant pyrofusinite provided additional pore space for pyrite precipitation.The Lower Block Coal Member (Pennsylvanian-Atokan, Westphalian C) is an economic low- to medium-sulfur, low-ash coal resource in the Illinois Basin. Sulfur content is generally low (averaging 1.0%) in the study area, but varies over short distances. Higher sulfur areas occur as isolated pods and epigenetic pyrite increases significantly in the upper third of the selected columns in higher sulfur areas. Sulfur variations cannot be predicted by typical geologic characteristics such as roof lithology, seam thickness, or seam elevation. Petrographic analysis shows that pyrite is generally associated with brighter microlithotypes, except in higher sulfur areas where infilling pyrite forms are associated with inertite. Higher sulfur areas reflect the water chemistry of the paleomire during and shortly after peat accumulation. Locally, abundant pyrofusinite provided additional pore space for pyrite precipitation.

International Journal of Coal Geology↗
USGS2019

Assessment of coal mine methane (CMM) and abandoned mine methane (AMM) resource potential of longwall mine panels: example from Northern Appalachian Basin, USA

"Coal mine methane (CMM) and abandoned mine methane (AMM), are by-products of underground coal mining. The quantity and the emission rate of CMM and AMM may vary depending on the type of mine, gas content of the mined coal seam, and gas sourced from strata and coal beds in overlying and underlying formations affected by mining. Therefore, if a mine has the potential of accumulating gas after being abandoned and sealed properly, methane may be produced and used as an energy source to serve to local communities around the mine. Producing AMM also prevents methane, which is a potent greenhouse gas, from leaking to the atmosphere through seals, shaft plugs or surface cracks. One of the technical barriers in front of investments to economical utilization of CMM and AMM is the difficulty to predict how much methane may be available in the gas emission zone (GEZ) as a resource during mining, and after the panels are sealed and the mine is abandoned. Another difficulty is to estimate how much of the potential methane resource can be produced, and its production feasibility with boreholes, such as gob gas ventholes (GGV) converted to capture AMM. In this study, a comparative assessment is presented to address the issues stated above. The assessment was conducted on two adjacent panels of a longwall mine that operated until 2016 in the Pennsylvania section of the Northern Appalachian Basin. The study is based on two approaches that might be used depending on the availability of data, extensive or minimal. The first approach uses an extensive geological data set, geostatistics, and measured shaft gas emission and GGV production values that were collected while the panel(s) were active to assess the AMM resource. The second approach uses a minimal amount of geologic data and its uncertainty as probabilistic distributions as well as predicted during-mining emissions using a publicly available software. Results showed that both approaches provide relatively comparable estimates of AMM resources and AMM recovery potential using wellbores. The differences in assessed quantities are mostly due to the characteristics of the two methods. In that regard, this paper can be considered as guidance to choose the assessment approach based on data availability. "

Northern Appalachian Basin↗
USGS2016

Carbon and oxygen isotopic composition of coal and carbon dioxide derived from laboratory coal combustion: A preliminary study

The concentration of carbon dioxide (CO 2 ) in the atmosphere has dramatically increased from the start of the industrial revolution in the mid-1700s to present levels exceeding 400 ppm. Carbon dioxide derived from fossil fuel combustion is a greenhouse gas and a major contributor to on-going climate change. Carbon and oxygen stable isotope geochemistry is a useful tool to help model and predict the contributions of anthropogenic sources of CO 2 in the global carbon cycle. Surprisingly few studies have addressed the carbon and oxygen isotopic composition of CO 2 derived from coal combustion. The goal of this study is to document the relationships between the carbon and oxygen isotope signatures of coal and signatures of the CO 2 produced from laboratory coal combustion in atmospheric conditions. Six coal samples were selected that represent various geologic ages (Carboniferous to Tertiary) and coal ranks (lignite to bituminous). Duplicate splits of the six coal samples were ignited and partially combusted in the laboratory at atmospheric conditions. The resulting coal-combustion gases were collected and the molecular composition of the collected gases and isotopic analyses of δ 13 C of CO 2 , δ 13 C of CH 4 , and δ 18 O of CO 2 were analysed by a commercial laboratory. Splits (~ 1 g) of the un-combusted dried ground coal samples were analyzed for δ 13 C and δ 18 O by the U.S. Geological Survey Reston Stable Isotope Laboratory. The major findings of this preliminary work indicate that the isotopic signatures of δ 13 C (relative to the Vienna Pee Dee Belemnite scale, VPDB) of CO 2 resulting from coal combustion are similar to the δ 13 C VPDB signature of the bulk coal (− 28.46 to − 23.86 ‰) and are not similar to atmospheric δ 13 C VPDB of CO 2 (~ − 8 ‰, see http://www.esrl.noaa.gov/gmd/outreach/isotopes/c13tellsus.html ). The δ 18 O values of bulk coal are strongly correlated to the coal dry ash yields and appear to have little or no influence on the δ 18 O values of CO 2 resulting from coal combustion in open atmospheric conditions. There is a wide range of δ 13 C values of coal reported in the literature and the δ 13 C values from this study generally follow reported ranges for higher plants over geologic time. The values of δ 18 O (relative to Vienna Standard Mean Ocean Water) of CO 2 derived from atmospheric combustion of coal and other high-carbon fuels (peat and coal) range from + 19.03 to + 27.03‰ and are similar to atmospheric oxygen δ 18 O VSMOW values which average + 23.8‰. Further work is needed on a broader set of samples to better define the relationships between coal composition and combustion-derived gases.

International Journal of Coal Geology↗
USGS1999

A digital resource model of the Upper Pennsylvanian Pittsburgh coal bed, Monongahela Group, northern Appalachian basin coal region, USA

The U.S. Geological Survey is currently conducting a coal resource assessment of the coal beds and zones that are expected to provide the bulk of the Nation's coal resources for the next few decades. The Pittsburgh coal bed is the first bed in the northern and central Appalachian basin coal region to undergo a fully-digital assessment. The bed-specific assessment is being carried out in partnership with the state geologic surveys of West Virginia (WV), Pennsylvania (PA), Ohio (OH), and Maryland (MD). Comprehensive stratigraphic and geochemical databases have been developed for the Pittsburgh coal bed, and areal extent, mined areas, structure contour, isopach, overburden thickness maps of the bed have been released as United States Geological Survey (USGS) Open-File Reports. The resulting resource model indicates that of the original 34 billion short tons (31 billion tonnes) of Pittsburgh coal, 16 billion short tons (14 billion tonnes) remain. Although most of the remaining coal is thinner, deeper, and higher in ash and sulfur (S) than the original resource, there are blocks of extensive thick (6-8 ft or 1.8-2.4 m) coal in southwestern PA and the northern panhandle of WV.The U.S. Geological Survey is currently conducting a coal resource assessment of the coal beds and zones that are expected to provide the bulk of the Nation's coal resources for the next few decades. The Pittsburgh coal bed is the first bed in the northern and central Appalachian basin coal region to undergo a fully-digital assessment. The bed-specific assessment is being carried out in partnership with the state geologic surveys of West Virginia (WV), Pennsylvania (PA), Ohio (OH), and Maryland (MD). Comprehensive stratigraphic and geochemical databases have been developed for the Pittsburgh coal bed, and areal extent, mined areas, structure contour, isopach, overburden thickness maps of the bed have been released as United States Geological Survey (USGS) Open-File Reports. The resulting resource model indicates that of the original 34 billion short tons (31 billion tonnes) of Pittsburgh coal, 16 billion short tons (14 billion tonnes) remain. Although most of the remaining coal is thinner, deeper, and higher in ash and sulfur (S) than the original resource, there are blocks of extensive thick (6-8 ft or 1.8-2.4 m) coal in southwestern PA and the northern panhandle of WV.

International Journal of Coal Geology↗
USGS2015

Pore characteristics of Wilcox Group Coal, U.S. Gulf Coast Region: Implications for the occurrence of coalbed gas

Pore characteristics of 27 subbituminous coal samples (16 mesh splits) from the Paleocene–Eocene Wilcox Group of north Louisiana (Ouachita and Caldwell Parishes) and south Texas (Zavala County) were examined in relation to desorbed gas content. Coal gas of the Wilcox Group is primarily biogenic in origin; thermogenic gas also may be present in some areas. On an as-received basis, desorbed gas contents range from 0.59 to 1.28 m 3 /t for Ouachita Parish samples, 0.37 to 5.19 m 3 /t for the Caldwell Parish samples, and 0.02 to 0.06 m 3 /t for the Zavala County samples. For Louisiana coal samples, micropore surface area and volume are correlated to the desorbed gas content of the Wilcox Group coal (correlations: r = 0.50 and 0.47, respectively), suggesting that micropore surface area and volume are important in terms of gas-holding capacity. Adsorption by micropores appears to be the primary form of gas storage for the Louisiana coal samples. Micropore surface area and volumes also are strongly correlated with the carbon/ash yield ratio (r = 0.97 and 0.94, respectively), indicating that gas sorption occurs primarily on organic matter. Mineral matter appears to reduce the sorption capacity of the coal. Micropore width decreases with depth (r = − 0.63), probably as the result of increasing pressure and coal rank with depth. For the Louisiana coal samples, mesopore surface area is negatively correlated with the carbon/ash yield ratio (r = − 0.70), suggesting that mesopores are preferentially associated with mineral matter. Average mesopore size is correlated with desorbed gas (r = 0.80) for the relatively shallow Ouachita Parish samples (average depth = 441 m, 1446 ft); these results suggest that the permeability of the Wilcox coal is greater in the shallow stratigraphic intervals compared to deeper intervals. Additionally, mesopore size decreases with depth (r = − 0.80). For Ouachita Parish coal samples, negative correlations of gas with mesopore surface area (r = − 0.74) and mesopore volume (r = − 0.56) strongly suggest that gas is not adsorbed in mesopores, and that free gas may be present in larger mesopores, macropores, or fractures of the Wilcox coal. Results also suggest that moisture in Ouachita Parish samples is present in mesopores; moisture in mesopores may have blocked gas adsorption. The low-gas south Texas samples (average depth = 313 m, 1026 ft) are markedly different from the Louisiana samples. Specifically, micropore surface area and micropore volume are negatively correlated with desorbed gas for the Texas samples (r =− 0.21 and − 0.36, respectively). Geologic or environmental conditions probably were not conducive to the generation or storage of microbial gas in the Zavala County coals. The geologic settings (i.e., salinity of formation water, groundwater recharge, permeability of coal) of each study area are important factors that need to be considered in relation to the potential for generation or storage of microbial gas. In south Texas, tectonic stress may have led to a reduction in permeability in the Wilcox Group coal, creating an unfavorable environment for the generation or preservation of microbial gas. The subbituminous rank of the Zavala coals is also too low for significant thermogenic gas generation to have occurred.

Arkansas, Louisiana, Mississippi, Texas↗
USGS2023

Thermal evolution of graptolite and solid bitumen properties at high maturity under natural and artificial conditions

To refine the use of graptolite and solid bitumen as thermal proxies at overmature conditions, we evaluated their evolution via Raman and infrared (IR) spectroscopies, reflectance, and geochemical screening using high-temperature pyrolysis experiments in comparison to naturally matured samples. Naturally matured samples included marine shales from the overmature Upper Ordovician Wufeng-Lower Silurian Longmaxi Formations (herein referred to as Wufeng-Longmaxi) of the Sichuan Basin, China. Immature samples for pyrolysis experiments included Mesoproterozoic (Ectasian) Xiamaling marine shale from Hebei, China (graptolite absent) and graptolite-bearing Ordovician (Tremadocian) Alum marine shale from Grönhögen, Sweden. Pyrolysis experiments at 360 °C for 10 days and 27 days (hydrous conditions), and 450 °C 3 days, 550 °C 3 days, and 550 °C 10 days (all anhydrous) created Xiamaling and Alum residues with solid bitumen and graptolite, respectively, of similar and higher maturity compared to the naturally matured Wufeng-Longmaxi samples. Compositional proxies from IR spectroscopy were inconclusive. Raman spectral properties including Raman band separation (RBS) and the full-width at half-maximum of the G-band (G-FWHM) exhibited robust positive and inverse relationships with increasing reflectance in pyrolysis residues, respectively. RBS values were systematically lower in artificially matured samples versus naturally matured samples with equivalent reflectance values, whereas G-FWHM values were systematically higher. This observation indicates that the limited duration or low internal reactor pressure of pyrolysis experiments is insufficient to allow alignment or ordering of aromatic carbon arrays in both organic matter types, relative to natural maturation occurring at geologic time scales. Reflectance of graptolite was typically higher than co-occurring solid bitumen in Wufeng-Longmaxi samples and the untreated Alum sample, suggesting inherently higher aromaticity. However, aromaticity in pyrolysis residues was systematically higher in solid bitumen compared to graptolite with equivalent reflectance values, indicating a higher kinetic barrier to molecular rearrangement in graptolite versus solid bitumen. These data further clarify differences in the molecular evolution of sedimentary organic matter in natural versus analogue laboratory environments and distinguish the properties of individual organic matter types in response to thermal stress.

International Journal of Coal Geology↗
USGS2013

Development of web-based organic petrology photomicrograph atlases and internet resources for professionals and students

With advances in web applications, organic petrography and other related disciplines are in need of updated online resources and educational tools to aid professionals and students in the identification and interpretation of macerals. The U.S. Geological Survey (USGS) Organic Petrology Laboratory along with USGS Eastern Energy Resources Science Center Information Technology staff have developed five web atlases containing images of organic matter in geologic materials: 1. an American Society for Testing and Materials (ASTM) Atlas, 2. an Organic Petrology Taxonomy for International Classification (OPTIC) of Coal Macerals Atlas, 3. an Interactive Gulf Coast Photomicrograph Web Atlas (I-Map), 4. an Organic Material in Shales Atlas (Shale), and 5. an interactive Blue/White/Ultraviolet (UV) Light Atlas (Light). Each web atlas contains images of macerals with associated sample and petrographic data collected by the USGS. These webpages will provide means to preserve and circulate petrographic data collected by the USGS for coal and shale samples from all over the world.

International Journal of Coal Geology↗