Search USGSSearch

SEARCH · Search USGS

Results for “EPA Report”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13Linked to original sources

Transboundary movement of airborne pollutants — A methodology for integrating spaceborne images and ground based data

The availability of relevant and accurate environmental information is essential for environmental policy-makers. Recent improvements in satellite remote sensing technologies, groundbased monitors, and data access have resulted in the ability to observe and assess major atmospheric and ecological events around the world on a timely basis Each of these monitoring technologies reveals different and useful information, yet rarely are the resulting data sets used together in an integrated manner. The U.S. Environmental Protection Agency (EPA) and the United Nations Environment Programme (UNEP) Global Resource Information Database (GRID) office in Sioux Falls identified an environmental issue of global interest as a test case for applying an integrated approach: the transboundary movement of atmospheric pollutants. Transboundary movement of atmospheric pollutants has ramifications for human and environmental health, as well as economic impacts. As a result, it is the focus of many bilateral, regional, and international policy efforts. A central question with atmospheric pollutant transport is how to monitor pollutant movement and how to merge different monitoring datasets into useful information. Highly visible regional plumes of dust, smoke, and urban haze can be seen with satellite sensors, while ground-based monitoring of air pollutants such as fine particulates, SO2 , and toxics occurs at the local level. Integration of these two kinds of measurements allows the user to remotely observe large environmental effects in many areas of the world, while obtaining more detailed information from ground-based monitors. Hence, the combination of satellite-based sensor data and ground-based monitoring data promotes greater understanding of the movement of pollutants than either data set alone. Combined data sets are important for use by both scientists and international policy-makers. A standard methodology did not exist to guide and encourage integrated use of satellite images and ground-based data to monitor and understand major pollution events, such as air pollution. Thus, a small team was assembled to develop a methodology for the integration of satellite images and ground-based data. First, we conducted a literature and project review covering past and current integrated remote and ground-based data projects, a literature search of published work, and a search of data sets and technologies that could be used in a combined form. Second, based on this search and documentation, a general methodology was developed for using integrated spaceborne and ground-based data sets, intended as a guide for general scientists and policy-makers. Third, we found an existing project that was willing to be a pilot for testing the methodology: a U.S. EPANOAA project that was using aerial and ground-based sampling to learn more about the airborne sources of mercury deposition in the Florida Everglades. This document presents the results of the literature and project review, the complete methodology, and the outcome of the Florida Everglades pilot project.

Report

Changes in streamflow, concentrations, and loads in selected nontidal basins in the Chesapeake Bay Watershed, 1985-2006

Water-quality and streamflow data from 34 sites in nontidal parts of the Chesapeake Bay watershed are presented to document annual nutrient and sediment loads and trends for 1985 through 2006, as part of an annual evaluation of water-quality conditions by the U.S. EPA Chesapeake Bay Program. This study presents the results of trends analysis for streamflow, loads, and concentrations. Annual mean flow to the bay for 2006 (78,650 cubic feet per second) was approximately 1 percent above the long-term annual mean flow from 1937 to 2005. Total freshwater flow entering the bay for the summer season (July-August-September) was the only season classified as 'wet' in 2006. For the period 1985 through 2006, streamflow was significantly increasing at two of the 34 sites. Observed (bias-corrected) concentration summaries indicate higher ranges in concentrations of total nitrogen in the northern major river basins (Pennsylvania, Maryland, and northern Virginia) than in the southern basins in Virginia. Results indicate almost half of the monitoring sites in the northern basins exhibited significant downward bias-corrected concentration trends in total nitrogen over time; results were similar for total phosphorus and sediment. Generally, loads for all constituents at the nine River Input Monitoring Program (RIM) sites, which comprise 78 percent of the streamflow entering the bay, were lower in 2006 than in 2005. The loads for total nitrogen are below the long-term average loads at eight of the nine RIM sites and total phosphorus and sediment loads are also below the long-term average at seven RIM sites. Combined annual mean total nitrogen flow-weighted concentrations from the nine RIM sites indicated an upward tendency in 2006; in contrast, total phosphorus and sediment indicated a downward tendency. From 1990 to 2006 for the 9 RIM sites, the mean concentrations of total nitrogen, total phosphorus, and sediment were 3.49, 0.195, and 116 milligrams per liter, respectively. Flow-weighted concentrations for phosphorus and sediment were lowest in the Susquehanna River at Conowingo, Md., most likely because of the trapping efficiency of three large reservoirs upstream from the sampling point. For all 34 sites and all constituents, trends in concentrations (not adjusted for flow) showed 12 statistically significant upward trends and 59 statistically significant downward trends for the period 1985 through 2006. When trends in concentrations are adjusted for flow, they can be used as indicators of human activity and effectiveness of management actions. The flow-adjusted trends indicated significant downward trends at approximately 74, 68, and 32 percent of the sites for total nitrogen, total phosphorus, and sediment, respectively. This may indicate that management actions are having some effect in reducing nutrients and sediments.

Delaware, Maryland, New York, Pennsylvania, Virgin

Results of a workshop concerning assessment of the functions of bottomland hardwoods

The U.S. Environmental Protection Agency (EPA) is authorized under Section 404 of the Clean Water Act (33 U.S.C. 1344) to participate in the regulation of the discharge of dredged or fill material into waters of the United States. This regulatory authority is exercised in partnership with the U.S. Army Corps of Engineers, which has responsibility for permit issuance, and in consultation with the U.S. Fish and Wildlife Service and the National Marine Fisheries Service. Through amendments to the original statute, a series of legal actions and court decisions, and the development of operating guidance among the responsible agencies, Section 404 has evolved into the primary mechanism afforded Federal authorities for the protection of wetlands. EPA recognizes the importance of wetlands in achieving the goals of the Clean Water Act, which are to protect and maintain the chemical, physical, and biological integrity of the Nation’s waters. EPA Administrator Lee Thomas has identified wetlands protection as among the highest of Agency priorities. EPA recognizes that bottomland hardwood (BLH) wetlands have vital and unique attributes that, if lost, would severely impact the physical, chemical, and biological integrity of the Nation's waters. As part of a broad program to better protect the Nation's wetlands, EPA has therefore identified bottomland hardwood wetlands as a priority resource requiring special attention on a national basis. Recognizing the importance of implementing an effective, nationally consistent, and scientifically defensible regulatory program, EPA, in October 1984, issued Interim Operating Guidance to its field personnel for implementing the Section 404 regulatory program in bottomland hardwood wetlands. With the goal of improving and finalizing that guidance, EPA is sponsoring a series of workshops designed to answer key questions concerning BLH wetlands, based on the best scientific and technical information currently available. The first two workshops were directed toward summarizing existing scientific and technical knowledge concerning the functions of BLH ecosystems, the characteristics that are important to each function, and the impact of various development activities on those characteristics. The first workshop, which was held in St. Francisville, Louisiana, in December, 1984, examined a wetland zonation concept as a framework for gaining a greater understanding of BLH structure and function. The workshop set out to determine whether characterization of BLH resources as a series of relatively distinct zones, defined by concomitant variation in hydrologic regime, soils, and vegetation, might provide the basis for a useful and scientifically sound regulatory framework. For examp1e, if certain zones are of particular importance to one or more wetland functions that the Clean Water Act was intended to protect, then the zonation concept might be useful from the perspective of how various activities should be regulated. Discussions during the first workshop, however, indicated that the zonation concept provides, at best, only an incomplete picture of the structure and function of BLH ecosystems. In many cases, BLH functions are not limited to or closely correlated with particular zones and, furthermore, many factors other than zone are important determinants of BLH functions. With these responses in mind, the second workshop, held at Lake Lanier, Georgia, in July, 1985, was designed to elicit information on two questions. First, if zones are not an adequate framework for understanding the functions of BLH systems, what characteristics (predictors) can be used to assess the extent to which a particular site performs these functions? And second, what are the impacts of various development activities that often occur in BLH ecosystems on those characteristics and thus on the functions themselves? At the second workshop, individual workgroups dealing with particular subject areas (e.g., hydrology, water quality, fisheries, wildlife, ecosystem processes, and cultural/recreational/economic resources) were able to identify site characteristics that are important determinants of the performance of various functions. For example, the Hydrology Workgroup identified flood storage as one of three major hydrologic functions that BLH ecosystems perform. The workgroup then identified the most important characteristic (e.g., surface area of the site, soil saturation, and others) that determine flood storage and the likely impact of several common activities (e.g., conversion to soybean production and levee construction) on these characteristics. Some of the workgroups also provided estimates of the aggregate impact of activities, acting through all of the characteristics, on certain functions. The workgroups also identified key characteristics that could be used to identify high-value wetlands for various functions. In addition, the workgroups pointed out a number of topics needing further examination and discussion. First, all of the workgroups identified the need to develop the technical basis and information sources to address the problem of cumulative impacts in the regulatory process. Second, most of the workgroups noted the important of contextual variables in assessing the function of a particular site. For example, the location of a BLH site in relationship to other tracts of habitat is an important variable for many wildlife species. Similarly, the extent to which a site retains or transforms contaminants is depended not only on the characteristics of the site, but also on its position in a watershed relative to contaminant inputs. And finally, several of the workgroups pointed out that assessing the impact of an activity on a function is not as simple as "adding up" the impact on individual characteristics, but may depend instead on complex interactions among characteristics. Addressing these questions, as summarized in the objectives and discussions that follow, was the focus of the third workshop, the results of which are described in this report.

Report

Land-Cover Change in the East Central Texas Plains, 1973-2000

Project Background: The Geographic Analysis and Monitoring (GAM) Program of the U.S. Geological Survey (USGS) Land Cover Trends project is focused on understanding the rates, trends, causes, and consequences of contemporary U.S. land-use and land-cover change. The objectives of the study are to: (1) develop a comprehensive methodology for using sampling and change analysis techniques and Landsat Multispectral Scanner (MSS) and Thematic Mapper (TM) data for measuring regional land-cover change across the United States, (2) characterize the types, rates and temporal variability of change for a 30-year period, (3) document regional driving forces and consequences of change, and (4) prepare a national synthesis of land-cover change (Loveland and others, 1999). Using the 1999 Environmental Protection Agency (EPA) Level III ecoregions derived from Omernik (1987) as the geographic framework, geospatial data collected between 1973 and 2000 were processed and analyzed to characterize ecosystem responses to land-use changes. The 27-year study period was divided into five temporal periods: 1973-1980, 1980-1986, 1986-1992, 1992-2000, and 1973-2000. General land-cover classes such as water, developed, grassland/shrubland, and agriculture for these periods were interpreted from Landsat MSS, TM, and Enhanced Thematic Mapper Plus imagery to categorize land-cover change and evaluate using a modified Anderson Land-Use Land-Cover Classification System for image interpretation. The interpretation of these land-cover classes complement the program objective of looking at land-use change with cover serving as a surrogate for land use. The land-cover change rates are estimated using a stratified, random sampling of 10-kilometer (km) by 10-km blocks allocated within each ecoregion. For each sample block, satellite images are used to interpret land-cover change for the five time periods previously mentioned. Additionally, historical aerial photographs from similar timeframes and other ancillary data such as census statistics and published literature are used. The sample block data are then incorporated into statistical analyses to generate an overall change matrix for the ecoregion. For example, the scalar statistics can show the spatial extent of change per cover type with time, as well as the land-cover transformations from one land-cover type to another type occurring with time. Field data of the sample blocks include direct measurements of land cover, particularly ground-survey data collected for training and validation of image classifications (Loveland and others, 2002). The field experience allows for additional observations of the character and condition of the landscape, assistance in sample block interpretation, ground truthing of Landsat imagery, and helps determine the driving forces of change identified in an ecoregion. Management and maintenance of field data, beyond initial use for training and validation of image classifications, is important as improved methods for image classification are developed, and as present-day data become part of the historical legacy for which studies of land-cover change in the future will depend (Loveland and others, 2002). The results illustrate that there is no single profile of land-cover change; instead, there is significant geographic variability that results from land uses within ecoregions continuously adapting to the resource potential created by various environmental, technological, and socioeconomic factors.

Open-File Report

Characterization of ambient groundwater quality within a statewide, fixed-station monitoring network in Pennsylvania, 2015–19

Pennsylvania leads the Nation in the number of individuals that use groundwater for private domestic water supply; more than 3 million rural and suburban Pennsylvania residents rely on private domestic supplies for drinking water. These supplies are not regulated nor routinely monitored; thus relevant groundwater-quality information is not widely available. The U.S. Geological Survey (USGS), in cooperation with the Pennsylvania Department of Environmental Protection (PaDEP) Safe Drinking Water Bureau, established a statewide, fixed-station ambient groundwater quality network in 2015. The goals for the Pennsylvania Groundwater Monitoring Network (GWMN) include characterizing ambient groundwater quality conditions in rural areas of the State and documenting potential changes in conditions over time. Seventeen wells were selected for monitoring at 6-month intervals beginning in 2015. Since then, several wells have been added to the GWMN, bringing the total number of wells sampled in the fall of 2019 to 28. Routinely monitored constituents included physical characteristics and chemical concentrations in filtered and unfiltered samples (major and trace elements, nutrients, and organic compounds). Samples for volatile organic compounds (VOCs), radionuclides, and dissolved hydrocarbon gases were collected during the first sampling event at each well. To offer insights on the quality of groundwater used for domestic supply in Pennsylvania, summary statistics for the 221 GWMN samples collected during 2015–19 are compared to U.S. Environmental Protection Agency (EPA) drinking-water standards, which are applicable to public water supplies. Results show that samples across the GWMN generally meet drinking-water standards for inorganic and organic constituents; however, a percentage of samples had concentrations that exceeded maximum contaminant level (MCL) thresholds for nitrate (3 percent) and secondary maximum contaminant level (SMCL) thresholds for iron (32 percent), manganese (36 percent), and aluminum (5 percent). Radon-222 activities, which were sampled only during the initial visit to a well, exceeded the lower proposed drinking water standard of 300 picocuries per liter (pCi/L) in 64 percent of wells in the GWMN; additionally, 7 percent of wells exceeded the higher proposed standard of 4,000 pCi/L. There were no exceedances for VOCs, but one well had a tribromomethane detection. Three wells had detectable concentrations of methane, with one sample exceeding the Pennsylvania action level of 7 milligrams per liter (mg/L). The pH and dissolved oxygen concentrations varied widely across the GWMN and were correlated with dissolved metal concentrations and other chemical characteristics of groundwater samples. Considering all samples collected for the study, the pH ranged from 4.2 to 8.3; 42 percent of pH values were either above or below the SMCL range of 6.5–8.5. The highest pH values resulted from contamination of loose grout used in the construction of one well and decreased to levels consistent with other wells in the vicinity after repeated sampling rounds. Dissolved oxygen (DO), which ranged from 0 to 13.9 mg/L, influences the mobility and prevalence of constituents with variable oxidation state, including iron, manganese, and nitrogen species. Samples with acidic pH (less than 6.5) and (or) low DO had the highest concentrations of manganese and iron, whereas those with neutral to alkaline pH values had the highest concentrations of calcium, magnesium, sodium, and other major ions. Analysis of major ions indicates that calcium/bicarbonate water types are the most common, with a few characterized as calcium/chloride or sodium/chloride, and most others as mixed water types including calcium-magnesium/bicarbonate, sodium-magnesium/bicarbonate, and sodium/bicarbonate-chloride. Nonparametric statistical methods were used to evaluate the data for spatial and temporal trends. A principal components analysis (PCA) model developed with ranked data values for the entire network resulted in three components, (1) dissolved solids, (2) redox, and (3) sodium-chloride, which explained 74.5 percent of variance in the dataset. On the basis of individual contributions to the PCA, certain wells were identified through hierarchical cluster analysis that shared relevant water-quality characteristics. The spatial distribution of sampling locations and the temporal trends of constituent concentrations indicate that hydrogeologic setting and topographic position as defined in the PCA model are important factors affecting the spatial and temporal patterns of groundwater quality in the GWMN.

Pennsylvania

Uranium concentrations in groundwater, northeastern Washington

A study of uranium in groundwater in northeastern Washington was conducted to make a preliminary assessment of naturally occurring uranium in groundwater relying on existing information and limited reconnaissance sampling. Naturally occurring uranium is associated with granitic and metasedimentary rocks, as well as younger sedimentary deposits, that occur in this region. The occurrence and distribution of uranium in groundwater is poorly understood. U.S. Environmental Protection Agency (EPA) regulates uranium in Group A community water systems at a maximum contaminant level (MCL) of 30 μg/L in order to reduce uranium exposure, protect from toxic kidney effects of uranium, and reduce the risk of cancer. However, most existing private wells in the study area, generally for single family use, have not been sampled for uranium. This document presents available uranium concentration data from throughout a multi-county region, identifies data gaps, and suggests further study aimed at understanding the occurrence of uranium in groundwater. The study encompasses about 13,000 square miles (mi 2 ) in the northeastern part of Washington with a 2010 population of about 563,000. Other than the City of Spokane, most of the study area is rural with small towns interspersed throughout the region. The study area also includes three Indian Reservations with small towns and scattered population. The area has a history of uranium exploration and mining, with two inactive uranium mines on the Spokane Indian Reservation and one smaller inactive mine on the outskirts of Spokane. Historical (1977–2016) uranium in groundwater concentration data were used to describe and illustrate the general occurrence and distribution of uranium in groundwater, as well as to identify data deficiencies. Uranium concentrations were detected at greater than 1 microgram per liter (μg/L) in 60 percent of the 2,382 historical samples (from wells and springs). Uranium concentrations ranged from less than 1 to 88,600 μg/L, and the median concentration of uranium in groundwater for all sites was 1.4 μg/L. New (2017) uranium in groundwater concentration data were obtained by sampling 13 private domestic wells for uranium in areas without recent (2000s) water-quality data. Uranium was detected in all 13 wells sampled for this study; concentrations ranged from 1.03 to 1,180 μg/L with a median of 22 μg/L. Uranium concentrations of groundwater samples from 6 of the 13 wells exceeded the MCL for uranium. Uranium concentrations in water samples from two wells were 1,130 and 1,180 μg/L, respectively; nearly 40 times the MCL. Additional data collection and analysis are needed in rural areas where self-supplied groundwater withdrawals are the primary source of water for human consumption. Of the roughly 43,000 existing water wells in the study area, only 1,755 wells, as summarized in this document, have available uranium concentration data, and some of those data are decades old. Furthermore, analysis of area groundwater quality would benefit from a more extensive chemical-analysis suite including general chemistry in order to better understand local geochemical conditions that largely govern the mobility of uranium. Although the focus of the present study is uranium, it also is important to recognize that there are other radionuclides of concern that may be present in area groundwater.

Washington

Delineation of areas having elevated electrical conductivity, orientation and characterization of bedrock fractures, and occurrence of groundwater discharge to surface water at the U.S. Environmental Protection Agency Barite Hill/Nevada Goldfields Superfund site near McCormick, South Carolina

During October 2012 through March 2013, the U.S. Geological Survey (USGS), in cooperation with the U.S. Environmental Protection Agency (EPA) Region 4, Superfund Section, conducted borehole geophysical logging, surface geophysical surveys, and water-quality profiling in selected wells and areas to characterize or delineate the extent of elevated subsurface electrical conductivity at the EPA Barite Hill/Nevada Goldfields Superfund site near McCormick, South Carolina. Elevated electrical conductivity measured at the site may be related to native rock materials, waste rock disposal areas used in past operations, and (or) groundwater having elevated dissolved solids (primarily metals and major ions) related to waste migration. Five shallow screened wells and four open-borehole bedrock wells were logged by using a suite of borehole tools, and downhole water-quality profiles were recorded in two additional wells. Well depths ranged from about 26 to 300 feet below land surface. Surface geophysical surveys based on frequency-domain electromagnetic and distributed temperature sensing (DTS) techniques were used to identify areas of elevated electrical conductivity (Earth materials and groundwater) and potential high dissolved solids in groundwater and surface water on land and in areas along the northern unnamed tributary at the site. Results from the electromagnetic-induction logging of four selected wells near the Main Pit and one well located about 800 feet southeast of the Main Pit lake indicate that elevated electrical conductivity extends to a depth of about 110 feet below land surface. Groundwater-quality properties recorded in eight selected wells were highly variable, suggesting a broad spectrum of geochemical conditions and contaminant concentrations within the groundwater system. Ranges of field water-quality properties recorded from water-profiling of groundwater in all wells logged were as follows: pH, 3.1 to 9.2; specific conductance, 48 to 5,300 microsiemens per centimeter; dissolved oxygen, 0.2 to 4.4 milligrams per liter; and water temperature, 17.0 to 18.0 degrees Celsius. The highest specific conductance and lowest pH measurements were made in boreholes located between the Main Pit lake and the northern unnamed tributary. Conceptually, these wells may intercept elevated dissolved solids in groundwater leaking from the Main Pit lake along a flow path that discharges into the unnamed tributary to the north. Results from surface geophysical electromagnetic and fiber-optics surveys confirm areas of focused discharge of groundwater near the Main Pit lake along the northern unnamed tributary. The frequency-domain surface electromagnetic surveys also identified an area with higher levels of elevated electrical conductivity located northwest of the former Rainsford Pit area. Bedrock properties were characterized from borehole geophysical logs collected from three open-borehole bedrock wells. The mean strike azimuth of the borehole foliation data measured in bedrock well IR-1 was 221° (N. 41° E.), and the mean dip angle was 78° to the northwest. Dominant strike azimuth orientations of primary fractures measured in three boreholes were from 210° to 250° (N. 30° E. to N. 70° E.) with a mean dip of 68° northwest. Transmissivity estimates interpreted from the heat-pulse flowmeter data from bedrock well IR-1 were about 69 feet squared per day, and the radius of influence was estimated at about 640 feet.

South Carolina

Arsenic and radionuclide occurrence and relation to geochemistry in groundwater of the Gulf Coast Aquifer System in Houston, Texas, 2007–11

The U.S. Geological Survey (USGS), in cooperation with the City of Houston, began a study in 2007 to determine concentrations, spatial extent, and associated geochemical conditions that might be conducive for mobility and transport of selected naturally occurring trace elements and radionuclides in the Gulf Coast aquifer system in Houston, Texas. Water samples were collected from 91 municipal supply wells completed in the Evangeline and Chicot aquifers of the Gulf Coast aquifer system in northeastern, northwestern, and southwestern Houston; hereinafter referred to as northeast, northwest and southwest Houston areas. Wells were sampled in three phases: (1) 28 municipal supply wells were sampled during 2007–8, (2) 60 municipal supply wells during 2010, and (3) 3 municipal supply wells during December 2011. During each phase of sampling, samples were analyzed for major ions, selected trace elements, and radionuclides. At a subset of wells, concentrations of arsenic species and other radionuclides (carbon-14, radium-226, radium-228, radon-222, and tritium) also were analyzed. Selected physicochemical properties were measured in the field at the time each sample was collected, and oxidation-reduction potential and unfiltered sulfides also were measured at selected wells. The source-water (the raw, ambient water withdrawn from municipal supply wells prior to water treatment) samples were collected for assessment of aquifer conditions in order to provide community water-system operators information that could be important when they make decisions about which treatment processes to apply before distributing finished drinking water. Geochemical conditions of groundwater of the Gulf Coast aquifer system are suitable in some instances for release of arsenic and radionuclides from aquifer materials. Recent changes to the U.S. Environmental Protection Agency (EPA) primary drinking-water regulations for arsenic and a selected number of natural radionuclides have highlighted the necessity for municipal supply system managers to be aware of the occurrence and distribution of these constituents in their source water. Concentrations of arsenic ranged from 0.58 to 23.5 micrograms per liter (μg/L), with relatively low median and 75th percentile concentrations (2.7 and 3.6 μg/L, respectively). The gross alpha-particle activity completed within 72 hours after sample collection ranged from R-1.1 (nondetect where the result was below the sample specific critical level) to 39.7 picocuries per liter (pCi/L), with a median of 10.3 pCi/L. After 30 days, the gross alpha-particle activities in the 91 samples ranged from R-0.94 to 25.5 pCi/L, with a median of 5.60 pCi/L. Concentrations of uranium ranged from less than 0.02 to 42.7 μg/L, with a median value of 1.69 μg/L and a 75th-percentile value of 6.48 μg/L. The maximum concentrations of radium-226 and combined radium (sum of radium-226 plus radium-228) were 4.34 pCi/L and 3.23 pCi/L, respectively. Aquifer major-ion geochemistry was characterized and shown to contain three chemical types of water as grouped by a simplified predominant cation and anion classification system: (1) calcium- bicarbonate type, (2) sodium-bicarbonate type, and (3) sodium-chloride type. Aquifer geochemistry also was characterized into four reduction-oxidation (redox) categories: (1) oxic, (2) suboxic, (3) mixed, and (4) anoxic. Within the anoxic category, groundwater was further characterized into four presumed predominant reduction processes: (1) iron or sulfate or both [Fe(III)/SO 4 ] reducing, (2) iron [Fe(III)] reducing, (3) iron and sulfate [Fe(III)-SO 4 ] reducing, or (4) methanogenic, as defined by composition of redox species. The oxic category was associated with calcium-bicarbonate-type water, and the methanogenic-anoxic process was associated exclusively with the sodium-bicarbonate-type water. The species of arsenic and the dominant radionuclide present were associated with specific redox categories. Arsenate was associated primarily with oxic water and did not exceed 3.5 µg/L, whereas arsenite was associated with iron-reducing, anoxic water samples and, at the highest concentrations, occurred in sulfate-reducing, anoxic; methanogenic-anoxic; or both water samples. Uranium was associated exclusively with the oxic water, whereas the highest concentrations of combined radium were associated with the iron-reducing, anoxic water. The gross alpha-particle activity was greatest in the oxic waters where the source of the radioactivity was the uranium. Associated geochemical conditions conducive for mobility of arsenic and radionuclides and their spatial and vertical extent in the Gulf Coast aquifer system in Houston are important aspects to the areal management of the municipal groundwater supplies in Houston. Ongoing research is seeking to define chemical or geological factors that are the optimal indicators for elevated concentrations of these naturally occurring constituents.

Texas

Cadmium risks to freshwater life: derivation and validation of low-effect criteria values using laboratory and field studies

In 2001, the U.S. Environmental Protection Agency (EPA) released updated aquatic life criteria for cadmium. Since then, additional data on the effects of cadmium to aquatic life have become available from studies supported by the EPA, Idaho Department of Environmental Quality (IDEQ), and the U.S. Geological Survey, among other sources. Updated data on the effects of cadmium to aquatic life were compiled and reviewed and low-effect concentrations were estimated. Low-effect values were calculated using EPA's guidelines for deriving numerical national water-quality criteria for the protection of aquatic organisms and their uses. Data on the short-term (acute) effects of cadmium on North American freshwater species that were suitable for criteria derivation were located for 69 species representing 57 genera and 33 families. For longer-term (chronic) effects of cadmium on North American freshwater species, suitable data were located for 28 species representing 21 genera and 17 families. Both the acute and chronic toxicity of cadmium were dependent on the hardness of the test water. Hardness-toxicity regressions were developed for both acute and chronic datasets so that effects data from different tests could be adjusted to a common water hardness. Hardness-adjusted effects values were pooled to obtain species and genus mean acute and chronic values, which then were ranked by their sensitivity to cadmium. The four most sensitive genera to acute exposures were, in order of increasing cadmium resistance, Oncorhynchus (Pacific trout and salmon), Salvelinus ('char' trout), Salmo (Atlantic trout and salmon), and Cottus (sculpin). The four most sensitive genera to chronic exposures were Hyalella (amphipod), Cottus, Gammarus (amphipod), and Salvelinus. Using the updated datasets, hardness dependent criteria equations were calculated for acute and chronic exposures to cadmium. At a hardness of 50 mg/L as calcium carbonate, the criterion maximum concentration (CMC, or 'acute' criterion) was calculated as 0.75 mug/L cadmium using the hardness-dependent equation CMC = e(0.8403 ? ln(hardness)-3.572) where the 'ln hardness' is the natural logarithm of the water hardness. Likewise, the criterion continuous concentration (CCC, or 'chronic' criterion) was calculated as 0.37 mug/L cadmium using the hardness-dependent equation CCC = (e(0.6247 ? ln(hardness)-3.384)) ? (1.101672 - ((ln hardness) ? 0.041838))). Using data that were independent of those used to derive the criteria, the criteria concentrations were evaluated to estimate whether adverse effects were expected to the biological integrity of natural waters or to selected species listed as threatened or endangered. One species was identified that would not be fully protected by the derived CCC, the amphipod Hyalella azteca. Exposure to CCC conditions likely would lead to population decreases in Hyalella azteca, the food web consequences of which probably would be slight if macroinvertebrate communities were otherwise diverse. Some data also suggested adverse behavioral changes are possible in fish following long-term exposures to low levels of cadmium, particularly in char (genus Salvelinus). Although ambiguous, these data indicate a need to periodically review the literature on behavioral changes in fish following metals exposure as more information becomes available. Most data reviewed indicated that criteria conditions were unlikely to contribute to overt adverse effects to either biological integrity or listed species. If elevated cadmium concentrations that approach the chronic criterion values occur in ambient waters, careful biological monitoring of invertebrate and fish assemblages would be prudent to validate the prediction that the assemblages would not be adversely affected by cadmium at criterion concentrations.

Scientific Investigations Report

Effect of land-applied biosolids on surface-water nutrient yields and groundwater quality in Orange County, North Carolina

Land application of municipal wastewater biosolids is the most common method of biosolids management used in North Carolina and the United States. Biosolids have characteristics that may be beneficial to soil and plants. Land application can take advantage of these beneficial qualities, whereas disposal in landfills or incineration poses no beneficial use of the waste. Some independent studies and laboratory analysis, however, have shown that land-applied biosolids can pose a threat to human health and surface-water and groundwater quality. The effect of municipal biosolids applied to agriculture fields is largely unknown in relation to the delivery of nutrients, bacteria, metals, and contaminants of emerging concern to surface-water and groundwater resources. Therefore, the North Carolina Department of Environment and Natural Resources (NCDENR) collaborated with the U.S. Geological Survey (USGS) through the 319 Nonpoint Source Program to better understand the transport of nutrients and bacteria from biosolids application fields to groundwater and surface water and to provide a scientific basis for evaluating the effectiveness of the current regulations. The USGS conducted a paired agricultural watershed study in the Collins Creek and Cane Creek Reservoir watersheds in Orange County, North Carolina. Field activities were conducted from March 2011 through May 2013 at two field study sites, including biosolids field application sites owned by Orange County Water and Sewer Authority (OWASA) in the Collins Creek watershed and a background study site in the Cane Creek watershed that has no fields receiving biosolids applications. Samples of biosolids source material and soil were collected from the land-application fields for laboratory analyses. Soil samples were also collected from a background agricultural field in the Cane Creek watershed that has never received land-applied municipal biosolids. Shallow groundwater samples were collected quarterly from new monitoring wells installed by NCDENR along the edge of the biosolids land-application fields and a background agricultural field for laboratory analyses. Two surface-water monitoring sites were established on Collins Creek to compute continuous streamflow and collect discrete baseflow and stormwater runoff water-quality data upstream and downstream from the biosolids land-application fields. Surface water-quality samples were also collected for baseflow and stormwater runoff conditions at an existing USGS streamgage on Cane Creek to monitor water-quality conditions in the background study watershed. The study primarily focused on nutrients and bacteria; however, data for field properties and water-quality constituents, including metals, major ions, and contaminants of emerging concern (household-, industrial-, and agricultural-use compounds, pharmaceutical compounds, hormones, and antibiotics) also were collected and used in the analyses. There were no exceedances of the 10 elements with designated U.S. Environmental Protection Agency (EPA) ceiling concentrations for land-applied biosolids in any of the biosolids samples. Treatment processes and storage techniques used by OWASA are effective in eliminating Escherichia coli and fecal coliform bacteria from biosolids. Copper, molybdenum, total Kjeldahl nitrogen, and total phosphorus were elevated in the soil from biosolids land-application fields relative to the background field. The relative richness of these constituents in the biosolids land-application fields is consistent with biosolids being the source of the elevated concentrations given the relatively high concentrations of these constituents in the biosolids samples that were collected. Shallow groundwater in the transitional zone wells, which were located adjacent to and topographically downgradient from all the biosolids land-application fields, were found to be statistically different and had higher nitrate concentrations (medians greater than 12 milligrams per liter) than all the other wells sampled as part of the study. Surface-water nutrient concentrations and yields, primarily nitrate, were higher at the monitoring site on Collins Creek downstream from the biosolids land-application fields than the other study sites that drained watersheds without biosolids land application. The largest differences in concentrations between sites were measured at baseflow conditions, which indicate that the main cause of these differences, particularly between Cane Creek and the Collins Creek site downstream from the OWASA application fields, is related to nitrate contribution from the shallow groundwater. Contaminants of emerging concern were detected in approximately 40 percent of the laboratory analyses of the biosolids samples and more frequently in soil samples from the biosolids land-application fields (approximately 40 percent of laboratory analyses) relative to the soil samples from the background field (approximately 12 percent of laboratory analyses). However, contaminants of emerging concern detected in the laboratory analysis for this study do not appear to be good indicators of human-waste contaminants derived from land-applied biosolids in groundwater or surface-water because the number of detections and concentrations at the background wells and surface-water monitoring sites are similar to or higher than those at wells and monitoring sites adjacent to or downstream from the biosolids land-application fields. The data, analysis, and conclusions associated with this study can be used by regulatory agencies, resource managers, and wastewater-treatment operators to (1) better understand the quantity and characteristics of nutrients, bacteria, metals, and contaminants of emerging concern that are transported away from biosolids land-application fields to surface water and groundwater under current regulations for the purposes of establishing effective total maximum daily loads (TMDLs) and restoring impaired water resources, (2) assess how well existing regulations protect waters of the State and potentially recommend effective changes to regulations or land-application procedures, and (3) establish a framework for developing guidance on effective techniques for monitoring and regulatory enforcement of permitted biosolids land-application fields.

North Carolina

Arsenic, chromium, uranium, and vanadium in rock, alluvium, and groundwater, Mojave River and Morongo Areas, western Mojave Desert, southern California

Trace elements within groundwater that originate from aquifer materials and pose potential public-health hazards if consumed are known as geogenic contaminants. The geogenic contaminants arsenic, chromium, and vanadium can form negatively charged ions with oxygen known as oxyanions. Uranium complexes with bicarbonate and carbonate to form negatively charged ions having aqueous chemistry similar to oxyanions. The concentrations of arsenic, chromium, uranium, and vanadium in groundwater result from the combined effects of (1) geologic abundance within aquifer materials; (2) the fraction of these elements that have weathered from and sorbed to the surfaces of mineral grains and are potentially available to groundwater; and (3) the aqueous chemistry of dissolved oxyanions in groundwater during different redox conditions and pH, both of which are affected by hydrogeology, including the length of time groundwater has been in contact with aquifer materials. Concentrations of arsenic, chromium, uranium, and vanadium were measured in samples of (1) rock, surficial alluvium, and drill cuttings using portable (handheld) X-ray fluorescence (pXRF); (2) operationally defined fractions extractable from these materials; and (3) water from wells sampled between 2000 and 2018 within the 3,500 square mile Mojave River area and Morongo area of the western Mojave Desert, southern California. Regionally, rock and surficial alluvium in the Mojave River and Morongo areas are high in arsenic, low in chromium and uranium, and near the average bulk continental crust concentration for vanadium. Locally, high chromium concentrations are present in mafic rock within the San Gabriel Mountains; high uranium concentrations are present in felsic rock within the San Bernardino Mountains; and high arsenic, uranium, and vanadium concentrations are present in extrusive (volcanic) felsic rock within uplands surrounding groundwater basins along the Mojave River downstream from Barstow, California. Elemental assemblages identified using principal component analyses (PCA) of pXRF data were used to characterize felsic, mafic, and felsic volcanic source terranes in rock, surficial alluvium, and in geologic material penetrated by selected monitoring wells drilled between 1994 and 2018. Highly felsic alluvium associated with recent deposition from the Mojave River was identified along the 90-mile length of the floodplain aquifer along the river. The thickness of these highly felsic alluvial deposits ranged from 200 feet (ft) near Victorville and near Barstow to a thin veneer about 30 ft thick downstream from Victorville and downstream portions of the floodplain aquifer within the Mojave Valley. Groundwater in the Mojave River and Morongo areas was generally oxic and alkaline (pH≥7.5). Maximum concentrations of arsenic, hexavalent chromium [Cr(VI)], uranium, and vanadium in water from as many as 498 wells sampled between 2000 and 2018 were 360, 140, 1,470, and 690 micrograms per liter (μg/L), respectively. Water from 22 percent of sampled wells exceeded the U.S. Environmental Protection Agency (EPA) maximum contaminant level (MCL) for arsenic of 10 μg/L, with arsenic concentrations commonly exceeding the MCL in water from wells east of Barstow, deep wells in the Victorville fan, and in suboxic or reduced groundwater within the floodplain aquifer. Water from about 1 percent of sampled wells had Cr(VI) concentrations greater than the California MCL for total chromium of 50 μg/L, whereas 13 percent of sampled wells had Cr(VI) concentrations greater than the former California MCL of 10 μg/L. Hexavalent chromium concentrations were highest in water from wells in the Sheep Creek alluvial fan, eroded from mafic rock in the San Gabriel Mountains, although Cr(VI) concentrations greater than the former California MCL also were present elsewhere in the study area where mafic materials or older groundwater were present. Water from about 9 percent of sampled wells exceeded the EPA MCL for uranium of 30 μg/L, with concentrations exceeding the MCL commonly associated with irrigation return from agricultural land overlying the floodplain aquifer. Water from about 7 percent of sampled wells had vanadium concentrations greater than the California notification level of 50 μg/L; most of these wells were in the Victorville fan within the Mojave River area. In general, arsenic concentrations were higher in suboxic or reduced water; chromium concentrations were higher in oxic, alkaline (pH≥7.5) water; uranium concentrations were higher in circumneutral to slightly alkaline water (pH≤7.4); and vanadium concentrations were higher in highly alkaline (pH≥8.0) water, independent of redox status. Concentrations within geologic source terranes are not the sole factor controlling the concentrations of geogenic elements in groundwater. Differences in mineral weathering, pH-dependent sorption to surface-exchange sites on mineral grains, and aqueous geochemistry (especially redox status and pH) affect geogenic element concentrations in groundwater. Consequently, the relative abundances of arsenic, Cr(VI), uranium, and vanadium in groundwater differ from their relative abundances in the average bulk continental crust and their regional abundances in rock and surficial alluvium within groundwater basins of the western Mojave Desert. Processes that control the concentrations of arsenic, chromium, uranium, and vanadium in groundwater operate at the mineral-grain and aquifer scale. At the mineral-grain scale, sequential chemical extraction data show arsenic and uranium are more available to groundwater (under specific geochemical conditions) than chromium or vanadium, which largely are unavailable within unweathered mineral grains. Additionally, chromium and vanadium form few aqueous complexes and bind tightly with iron minerals within surface coatings on mineral grains making them less available to groundwater, whereas complexation with other dissolved ions enhances the solubility of uranium and, to a lesser extent, arsenic. Complexation also increases the valence (less negative charge) and increases the size of dissolved oxyanions and uranium complexes with bicarbonate and carbonate making them less readily sorbed to aquifer materials. At the aquifer scale, hydrogeology (including isolation of water in aquifers from surface sources of recharge, older groundwater age, and long contact times between groundwater and aquifer materials) combined with geochemical processes (such as silicate weathering) to produce alkaline groundwater. Desorption from sorption sites on the surfaces of mineral grains with increasing pH increases arsenic, chromium, and vanadium concentrations in water from wells and increases Cr(VI) concentrations as long as water remains oxic. Aqueous geochemistry and concentrations of geogenic contaminants also are affected by anthropogenic activities including (1) discharge of treated municipal wastewater, which may change the redox status of groundwater; (2) return from irrigated agriculture, which may alter the chemistry of groundwater and increase the solubility of trace elements such as uranium; and (3) groundwater pumping and subsequent water-level declines, which may change the source of water yielded by wells. The quality of water imported from northern California and infiltrated from ponds for groundwater recharge may be altered by naturally present trace elements, especially uranium in areas of agricultural land use or chromium within mafic alluvium.

California

Impacts of periodic dredging on macroinvertebrate prey availability for benthic foraging fishes in central San Francisco Bay, California

Background Because of its importance for species covered under Federal Fishery Management Plans (FMPs), the San Francisco Bay (SFB) estuary has been designated as Essential Fish Habitat (EFH) under the Magnuson-Stevens Fishery Conservation and Management Act (MSA; 16 United States Code §18559b). Within this estuary, benthic macroinvertebrate communities provide important prey resources for many economically significant fish species that rely on EFH. Periodic maintenance dredging can impact benthic communities; however, there is a lack of scientific information specific to SFB regarding dredging effects on macroinvertebrates in fish foraging areas. In addition, rates of benthic community recolonization and recovery following dredging and subsequent effects on foraging fish are unknown. For this reason, it is difficult for regulatory and resource agencies to determine the impacts of maintenance dredging. Thus, the National Marine Fisheries Service (NMFS) and the consortium of agencies (U.S. Environmental Protection Agency [EPA], U.S. Army Corp of Engineers [USACE], San Francisco Regional Water Quality Control Board [SFRWQCB], and San Francisco Bay Conservation and Development Commission [BCDC]) that make up the San Francisco Bay Long Term Management Strategy for Dredging (LTMS) identified a study of dredging impacts on SFB fish foraging habitat as one of their highest priorities in their 2011 Programmatic EFH Agreement (U.S. Army Corp of Engineers and U.S. Environmental Protection Agency, 2011). The LTMS agencies identified the region of interest as shallow (<13 feet [<4 meters (m)] mean lower low water [MLLW]), soft-bottom (silt/clay soil texture) areas in the Central Bay of SFB that were periodically dredged (every 1–3 years). Fish species of interest were compiled by NMFS and included those managed by the Pacific Groundfish, Pacific Salmon, and Coastal Pelagic FMPs (pursuant to the MSA) as well as those listed under the California State or Federal Endangered Species Act (ESA; 16 U.S.C. §1531–1544) as threatened or endangered. Target species included leopard shark ( Triakis semifasciata ), big skate ( Raja binoculata ), English sole ( Parophrys vetulus ), starry flounder ( Platichthys stellatus) , brown rockfish ( Sebastes auriculatus ), green sturgeon ( Acipenser medirostris ; threatened species under Federal ESA), northern anchovy ( Engraulis mordax ), longfin smelt ( Spirinchus thaleichthys, threatened under California ESA), and Pacific sardine ( Sardinops sagax ). In addition, Dungeness crab ( Cancer magister ), California halibut ( Paralichthys californicus ), and white sturgeon ( Acipenser transmontanus ) also were included because they are substantial contributors to the California State fishery. To address LTMS priorities, U.S. Geological Survey, Western Ecological Research Center, San Francisco Bay Estuary Field Station (hereafter USGS) conducted a multi-phased project including an initial literature review, study design, pilot study, and implementation of a full study. The overarching goal was to assess the effects of periodic dredge operations (every 1–3 years) on benthic habitat for foraging fish in the Central Bay, with emphasis on the foraging requirements of target fish species and analyses of benthic macroinvertebrates in dredged areas compared to adjacent undredged reference areas. The USGS partnered with University of California, Davis, fisheries expert James Hobbs to synthesize existing knowledge of fish foraging ecology and review benthic infauna community composition in SFB with a focus on the Central Bay. The literature review (Phase I; De La Cruz and others, 2016) addressed key questions identified by the LTMS on benthic foraging fish in the study area, including the following: (1) What are target fish eating? (2) What are the seasonal differences in prey items and macroinvertebrate assemblages? (3) What are the annual differences in prey items and macroinvertebrate assemblages? (4) What are the predominant macroinvertebrate functional groups from the perspective of fish foraging? Phase II consisted of creating a framework for a functional assessment of maintenance dredging effects on foraging fish and drafting a full study design (De La Cruz and others, 2017), which was then tested in the Phase III pilot study. The Phase IV full study incorporated lessons learned from the pilot study. Here we focus on the results of the full study and implications for benthic foraging fishes.

California

Status and understanding of groundwater quality in the North San Francisco Bay Shallow Aquifer study unit, 2012; California GAMA Priority Basin Project (ver. 1.1, February 2018)

Groundwater quality in the North San Francisco Bay Shallow Aquifer study unit (NSF-SA) was investigated as part of the Priority Basin Project of the California Groundwater Ambient Monitoring and Assessment (GAMA) Program. The study unit is in Marin, Mendocino, Napa, Solano, and Sonoma Counties and included two physiographic study areas: the Valleys and Plains area and the surrounding Highlands area. The NSF-SA focused on groundwater resources used for domestic drinking water supply, which generally correspond to shallower parts of aquifer systems than that of groundwater resources used for public drinking water supply in the same area. The assessments characterized the quality of untreated groundwater, not the quality of drinking water. This study included three components: (1) a status assessment , which characterized the status of the quality of the groundwater resources used for domestic supply for 2012; (2) an understanding assessment , which evaluated the natural and human factors potentially affecting water quality in those resources; and (3) a comparison between the groundwater resources used for domestic supply and those used for public supply. The status assessment was based on data collected from 71 sites sampled by the U.S. Geological Survey for the GAMA Priority Basin Project in 2012. To provide context, concentrations of constituents measured in groundwater were compared to U.S. Environmental Protection Agency (EPA) and California State Water Resources Control Board Division of Drinking Water regulatory and non-regulatory benchmarks for drinking-water quality. The status assessment used a grid-based method to estimate the proportion of the groundwater resources that has concentrations of water-quality constituents approaching or above benchmark concentrations. This method provides statistically unbiased results at the study-area scale and permits comparisons to other GAMA Priority Basin Project study areas. In the NSF-SA study unit as a whole, inorganic constituents with human-health benchmarks were detected at high relative concentrations (RCs) in 27 percent of the shallow aquifer system, and inorganic constituents with secondary maximum contaminant levels (SMCL) were detected at high RCs in 24 percent of the system. The inorganic constituents detected at high RCs were arsenic, boron, fluoride, manganese, nitrate, iron, sulfate, and total dissolved solids (TDS). Organic constituents with human-health benchmarks were detected at high RCs in 1 percent of the shallow aquifer system. Of the 148 organic constituents analyzed, 30 constituents were detected, although only 1, chloroform, had a detection frequency greater than 10 percent. Natural and anthropogenic factors that could affect the groundwater quality were evaluated by using results from statistical testing of associations between constituent concentrations and values of potential explanatory factors. Groundwater age class (modern, mixed, or pre-modern), redox class (oxic or anoxic), aquifer lithology class (metamorphic, sedimentary, or volcanic), and dissolved oxygen concentrations were the explanatory factors that explained distribution patterns of most of the inorganic constituents best. Groundwater classified primarily as pre-modern or mixed in age was associated with higher concentrations of arsenic and fluoride than waters classified as modern. Anoxic or mixed redox conditions were associated with higher concentrations of boron, fluoride, and manganese. Similar patterns of association with explanatory variables were seen for inorganic constituents with aesthetic-based benchmarks detected at high concentrations. Nitrate and perchlorate had higher concentrations in oxic than in the anoxic redox class and were positively correlated with urban land use. The NSF-SA water-quality results were compared to those of the GAMA North San Francisco Bay Public-Supply Aquifer study unit (NSF-PA). The NSF-PA was sampled in 2004 and covers much of the same area as the NSF-SA, but focused on the deeper public-supply aquifer system. The comparison of the NSF-PA to the NSF-SA showed that there were more differences between the Valleys and Plains study areas of the two study units than between the Highlands study areas of the two study units. As expected from the shallower depth of wells, the NSF-SA Valleys and Plains study area had a lesser proportion of pre-modern age groundwater and greater proportion of modern age groundwater than the NSF-PA Valleys and Plains study area. In contrast, well depths and groundwater ages were not significantly different between the two Highlands study areas. Arsenic, manganese, and nitrate were present at high RCs, and perchlorate was detected in greater proportions of the NSF-SA Valleys and Plains study area than the NSF-PA Valleys and Plains study area.

California

Mississippi’s resiliency and changing environmental conditions

Mississippi is experiencing shifts in environmental conditions, many of which are expected to intensify in the coming decades, and will have important implications for ecosystems, species, and natural resource management across the state. Historical climate analyses and downscaled projections summarized for the state’s Environmental Protection Agency (EPA) level III Ecoregions show that Mississippi will likely face increases in extremely hot days, more intense heatwaves, greater evapotranspiration, and reductions in cold-season extremes. Temperature trends indicate that while Mississippi has warmed relatively little over the last century, recent years have been among the warmest on record. Projections suggest substantial increases in the number of days with maximum temperatures at or above 95°F across all Ecoregions, particularly under higher warming scenarios. Correspondingly, the number of freezing nights is expected to decline, with statewide decreases of 7–21 days depending on the global warming level and timeframe. These combined patterns are likely to reshape habitat conditions, influence species’ thermal stress, and alter ecological processes such as soil moisture retention and stream temperature regimes. Mississippi’s hydrological systems are also expected to be significantly affected. Extreme rainfall events, particularly the most intense 1% of precipitation days, are projected to increase across the state, raising risks of flooding, erosion, and altered stream flow. Coastal Mississippi faces additional stress from sea‑level rise, which is already contributing to more frequent high‑tide flooding; projections show continued increases in inundation risk throughout the century. These flooding patterns, combined with stronger hurricane rainfall rates and the potential for landfalling storms to stall, pose ongoing threats to coastal ecosystems and communities. The state is also vulnerable to extreme weather hazards such as tornadoes. Recent research shows a geographic shift in tornado activity toward the Southeast, with Mississippi experiencing some of the nation’s greatest increases in favorable tornado days and nighttime tornado frequency—hazards that have direct implications for wildlife, habitat stability, and human safety. Drought conditions may intensify as well: higher temperatures and increased evapotranspiration during dry spells could worsen water stress regardless of uncertainty in average annual precipitation. These changing environmental conditions have important consequences for Mississippi’s Species of Greatest Conservation Need (SGCN). Vulnerability assessments and ecological niche models indicate that several fish, mussel, crayfish, plant, amphibian, bird, and mammal species may face heightened stress due to warming temperatures, shifting hydrology, habitat loss, and increases in extreme events. For example, many cold‑water and moisture‑dependent species in the state’s rivers and wetlands are already near their thermal limits, and further warming could reduce suitable habitat. Birds breeding in bottomland hardwood forests, such as the Prothonotary Warbler, are increasingly susceptible to nest loss from flooding. Similarly, species like the Louisiana Black Bear may encounter higher risks from habitat inundation and shifting food availability. The “A Closer Look” section underscores the vulnerability of the Mississippi Alluvial Plain—one of the state’s most ecologically rich yet heavily altered Ecoregions. Its bottomland hardwood forests, wetlands, and floodplain habitats support diverse wildlife but are increasingly threatened by rising temperatures, hydrological changes, development pressures, and compounded disturbances. These habitats provide critical ecosystem services such as water filtration, flood attenuation, and biodiversity support, making their conservation particularly urgent under future conditions. Collectively, these findings indicate that Mississippi’s ongoing and projected environmental changes present both challenges and opportunities for natural resource management. Incorporating adaptation strategies into the State Wildlife Action Plan will be essential for sustaining habitats, mitigating risks, and supporting the long‑term resilience of Mississippi’s wildlife and ecosystems.

Mississippi

Surface-water-quality data to support implementation of revised freshwater aluminum water-quality criteria in Massachusetts, 2018–19

The U.S. Geological Survey, in cooperation with the Massachusetts Department of Environmental Protection, performed a study to inform the development of the department’s guidelines for the collection and use of water-chemistry data to support calculation of site-dependent aluminum criteria values. The U.S. Geological Survey collected and analyzed discrete water-quality samples at four wastewater-treatment facilities and seven water-treatment facilities in eastern and central Massachusetts from April 2018 through May 2019. For each of the 11 facilities considered, water-quality samples were collected from treatment-plant effluent and receiving-water bodies. Samples were collected for laboratory analysis of major ions (calcium and magnesium ions are used to calculate total hardness), dissolved organic carbon (DOC), total organic carbon (TOC), and total recoverable aluminum. Field parameters for pH, temperature, and specific conductance were measured in situ concurrently with sample collection. Water-quality conditions differed among monitoring stations. The highest pH values were observed for stations on the Assabet River that receive effluent discharges from wastewater-treatment facilities (the Westborough, Marlborough, Hudson, and Maynard wastewater-treatment facilities). High DOC concentrations (greater than 10 mg/L) were measured in water bodies associated with large areas of riparian wetlands—Lily Pond (Cohasset) and Third Herring Brook (Hanover), and low DOC concentrations (less than 2.5 mg/L) were measured at three water bodies in central Massachusetts—Hocomonco Pond (Westborough), Wyman Pond (Fitchburg), and Monoosnoc Brook (Leominster). Wyman Pond (Fitchburg), Monoosnoc Brook (Leominster), and Lily Pond (Cohasset) also had low pH values and low total hardness concentrations. The monthly discrete pH, DOC, and total hardness data for selected stations on receiving-water bodies were used in the U.S. Environmental Protection Agency Aluminum Criteria Calculator Version 2.0 to estimate site-dependent total recoverable aluminum concentrations that—if not exceeded—would be expected to protect fish, invertebrates, and other aquatic life from adverse effects associated with acute and chronic aluminum exposures. The U.S. Environmental Protection Agency Calculator output provides values for the acute criterion, defined as the criterion maximum concentration (CMC), an estimate of the highest aluminum concentration in surface water to which an aquatic community can be exposed briefly without resulting in an unacceptable effect. This output also provides values for the chronic criterion, defined as the criterion continuous concentration (CCC), an estimate of the highest concentration of aluminum in surface water to which an aquatic community can be exposed indefinitely without resulting in an unacceptable effect. To determine aluminum criteria values typically evaluated for use as protective water-quality criteria, the monthly instantaneous CMC and CCC values were used to calculate the minimum, 5th percentile, and 10th percentile CMC and CCC values for selected monitoring stations. The monthly instantaneous aluminum CMC and CCC values generated using the EPA Calculator varied among stations. Aluminum CMC and CCC values were highest for four ambient (upstream) stations on the Assabet River associated with wastewater-treatment facilities (Westborough, Marlboro, Hudson, and Maynard). Aluminum CMC and CCC values were lower for stations associated with water-treatment facilities, and lowest for selected ambient stations on Lily Pond, Monoosnoc Brook, and Wyman Pond associated with water-treatment facilities in Cohasset, Leominster, and Fitchburg, respectively. For many stations, the highest CMC and CCC instantaneous aluminum criteria values generated using the U.S. Environmental Protection Agency Calculator were for months during the growing season for algae and aquatic macrophytes (April or May through September or October) and the lowest values were for months during the nongrowing season (October or November through March or April), indicating the importance of collecting water-quality data during the nongrowing season. Aluminum CMC and CCC values generated by the U.S. Environmental Protection Agency Calculator are sensitive to variations in the input parameters (pH, DOC, and total hardness). Aluminum solubility is particularly affected by pH. To characterize diel and seasonal variations in pH, multiparameter water-quality monitors recording continuous (15-minute interval) water temperature and pH were installed in the receiving-water body for one station near each facility upstream from the effluent discharge (in rivers) or at a station outside the immediate effect of effluent discharge (in ponds). Continuous water temperature and pH data were collected from April or May 2018 through November or December 2018. Continuous pH data indicated that the pond stations and Assabet River stations had large diel variations in pH during the growing season. Continuous pH data were used together with discrete DOC and total hardness data to evaluate the potential effect of diel variations in pH on calculated site-dependent aluminum criteria values. For the 11 stations, diel variations in pH were determined to correspond to differences in the 10th percentile of CMC values by a median of 160 μg/L, ranging from 0 to 610 μg/L, and differences in the 10th percentile of CCC values by a median of 40 μg/L, ranging from 15 to 210 μg/L. The low monthly instantaneous CMC and CCC values that have the greatest effect on the minimum, 5th percentile, and 10th percentile aluminum values tend to result during the nongrowing season (October or November through March or April) when the range of diel variations in pH is small, thus minimizing the effect of diel variations in pH on the lowest CMC and CCC values. Historical water-quality data on organic carbon in Massachusetts streams were investigated using data retrieved from the USGS National Water Information System database. An assessment of the availability of historical pH, DOC, and hardness data indicated that more data were available for TOC than for DOC. A linear regression equation was developed for the relation between DOC and TOC concentrations to inform the potential use of available data to evaluate water-quality conditions at additional sites across Massachusetts where only pH, hardness, and TOC data are available. DOC and TOC concentrations were well correlated in the 223 samples in which both constituents were analyzed, and the equation had a coefficient of determination ( R 2 ) equal to 0.93.

Massachusetts

Groundwater quality in the Western San Joaquin Valley study unit, 2010: California GAMA Priority Basin Project

Water quality in groundwater resources used for public drinking-water supply in the Western San Joaquin Valley (WSJV) was investigated by the USGS in cooperation with the California State Water Resources Control Board (SWRCB) as part of its Groundwater Ambient Monitoring and Assessment (GAMA) Program Priority Basin Project. The WSJV includes two study areas: the Delta–Mendota and Westside subbasins of the San Joaquin Valley groundwater basin. Study objectives for the WSJV study unit included two assessment types: (1) a status assessment yielding quantitative estimates of the current (2010) status of groundwater quality in the groundwater resources used for public drinking water, and (2) an evaluation of natural and anthropogenic factors that could be affecting the groundwater quality. The assessments characterized the quality of untreated groundwater, not the quality of treated drinking water delivered to consumers by water distributors. The status assessment was based on data collected from 43 wells sampled by the U.S. Geological Survey for the GAMA Priority Basin Project (USGS-GAMA) in 2010 and data compiled in the SWRCB Division of Drinking Water (SWRCB-DDW) database for 74 additional public-supply wells sampled for regulatory compliance purposes between 2007 and 2010. To provide context, concentrations of constituents measured in groundwater were compared to U.S. Environmental Protection Agency (EPA) and SWRCB-DDW regulatory and non-regulatory benchmarks for drinking-water quality. The status assessment used a spatially weighted, grid-based method to estimate the proportion of the groundwater resources used for public drinking water that has concentrations for particular constituents or class of constituents approaching or above benchmark concentrations. This method provides statistically unbiased results at the study-area scale within the WSJV study unit, and permits comparison of the two study areas to other areas assessed by the GAMA Priority Basin Project statewide. Groundwater resources used for public drinking water in the WSJV study unit are among the most saline and most affected by high concentrations of inorganic constituents of all groundwater resources used for public drinking water that have been assessed by the GAMA Priority Basin Project statewide. Among the 82 GAMA Priority Basin Project study areas statewide, the Delta–Mendota study area ranked above the 90th percentile for aquifer-scale proportions of groundwater resources having concentrations of total dissolved solids (TDS), sulfate, chloride, manganese, boron, chromium(VI), selenium, and strontium above benchmarks, and the Westside study area ranked above the 90th percentile for TDS, sulfate, manganese, and boron. In the WSJV study unit as a whole, one or more inorganic constituents with regulatory or non-regulatory, health-based benchmarks were present at concentrations above benchmarks in about 53 percent of the groundwater resources used for public drinking water, and one or more organic constituents with regulatory health-based benchmarks were detected at concentrations above benchmarks in about 3 percent of the resource. Individual constituents present at concentrations greater than health-based benchmarks in greater than 2 percent of groundwater resources used for public drinking water included: boron (51 percent, SWRCB-DDW notification level), chromium(VI) (25 percent, SWRCB-DDW maximum contaminant level (MCL)), arsenic (10 percent, EPA MCL), strontium (5.1 percent, EPA Lifetime health advisory level (HAL)), nitrate (3.9 percent, EPA MCL), molybdenum (3.8 percent, EPA HAL), selenium (2.6 percent, EPA MCL), and benzene (2.6 percent, SWRCB-DDW MCL). In addition, 50 percent of the resource had TDS concentrations greater than non-regulatory, aesthetic-based SWRCB-DDW upper secondary maximum contaminant level (SMCL), and 44 percent had manganese concentrations greater than the SWRCB-DDW SMCL. Natural and anthropogenic factors that could affect the groundwater quality were evaluated by using results from statistical testing of associations between constituent concentrations and values of potential explanatory factors, inferences from geochemical and age-dating tracer results, and by considering the water-quality results in the context of the hydrogeologic setting of the WSJV study unit. Natural factors, particularly the lithologies of the source areas for groundwater recharge and of the aquifers, were the dominant factors affecting groundwater quality in most of the WSJV study unit. However, where groundwater resources used for public supply included groundwater recharged in the modern era, mobilization of constituents by recharge of water used for irrigation also affected groundwater quality. Public-supply wells in the Westside study area had a median depth of 305 m and primarily tapped groundwater recharged hundreds to thousands of years ago, whereas public-supply wells in the Delta–Mendota study area had a median depth of 85 m and primarily tapped either groundwater recharged within the last 60 years or groundwater consisting of mixtures of this modern recharge and older recharge. Public-supply wells in the WSJV study unit are screened in the Tulare Formation and zones above and below the Corcoran Clay Member are used. The Tulare Formation primarily consists of alluvial sediments derived from the Coast Ranges to the west, except along the valley trough at the eastern margin of the WSJV study unit where the Tulare Formation consists of fluvial sands derived from the Sierra Nevada to the east. Groundwater from wells screened in the Sierra Nevada sands had manganese-reducing or manganese- and iron-reducing oxidation-reduction (redox) conditions. These redox conditions commonly were associated with elevated arsenic or molybdenum concentrations, and the dominance of arsenic(III) in the dissolved arsenic supports reductive dissolution of iron and manganese oxyhydroxides as the mechanism. In addition, groundwater from many wells screened in Sierra Nevada sands contained low concentrations of nitrite or ammonium, indicating reduction of nitrate by denitrification or dissimilatory processes, respectively. Geology of the Coast Ranges westward of the study unit strongly affects groundwater quality in the WSJV. Elevated concentrations of TDS, sulfate, boron, selenium and strontium in groundwater were primarily associated with aquifer sediments and recharge derived from areas of the Coast Ranges dominated by Cretaceous-to-Miocene age, organic-rich, reduced marine shales, known as the source of selenium in WSJV soils, surface water, and groundwater. Low sulfur-isotopic values (δ34S) of dissolved sulfate indicate that the sulfate was largely derived from oxidation of biogenic pyrite from the shales, and correlations with trace element concentrations, geologic setting, and groundwater geochemical modeling indicated that distributions of sulfate, strontium, and selenium in groundwater were controlled by dissolution of secondary sulfate minerals in soils and sediments. Elevated concentrations of chromium(VI) were primarily associated with aquifer sediments and recharge derived from areas of the Coast Ranges dominated by the Franciscan Complex and ultramafic rocks. The Franciscan Complex also has boron-rich, sodium-chloride dominated hydrothermal fluids that contribute to elevated concentrations of boron and TDS. Groundwater from wells screened in Coast Ranges alluvium was primarily oxic and relatively alkaline (median pH value of 7.55) in the Delta–Mendota study area, and primarily nitrate-reducing or suboxic and alkaline (median pH value of 8.4) in the Westside study area. Many groundwater samples from those wells have elevated concentrations of arsenic(V), molybdenum, selenium, or chromium(VI), consistent with desorption of metal oxyanions from mineral surfaces under those geochemical conditions. High concentrations of benzene were associated with deep wells located in the vicinity of petroleum deposits at the southern end of the Westside study area. Groundwater from these wells had premodern age and anoxic geochemical conditions, and the ratios among concentrations of hydrocarbon constituents were different from ratios found in fuels and combustion products, which is consistent with a geogenic source for the benzene rather than contamination from anthropogenic sources. Water stable-isotope compositions, groundwater recharge temperatures, and groundwater ages were used to infer four types of groundwater: (1) groundwater derived from natural recharge of water from major rivers draining the Sierra Nevada; (2) groundwater primarily derived from natural recharge of water from Coast Ranges runoff; (3) groundwater derived from recharge of pumped groundwater applied to the land surface for irrigation; and (4) groundwater derived from recharge during a period of much cooler paleoclimate. Water previously used for irrigation was found both above and below the Corcoran Clay, supporting earlier inferences that this clay member is no longer a robust confining unit. Recharge of water used for irrigation has direct and indirect effects on groundwater quality. Elevated nitrate concentrations and detections of herbicides and fumigants in the Delta–Mendota study area generally were associated with greater agricultural land use near the well and with water recharged during the last 60 years. However, the extent of the groundwater resource affected by agricultural sources of nitrate was limited by groundwater redox conditions sufficient to reduce nitrate. The detection frequency of perchlorate in Delta–Mendota groundwater was greater than expected for natural conditions. Perchlorate, nitrate, selenium, and strontium concentrations were correlated with one another and were greater in groundwater inferred to be recharge of previously pumped groundwater used for irrigation. The source of the perchlorate, selenium, and strontium appears to be salts deposited in the soils and sediments of the arid WSJV that are dissolved and flushed into groundwater by the increased amount of recharge caused by irrigation. In the Delta–Mendota study area, the groundwater with elevated concentrations of selenium was found deeper in the aquifer system than it was reported by a previous study 25 years earlier, suggesting that this transient front of groundwater with elevated concentrations of constituents derived from dissolution of soil salts by irrigation recharge is moving down through the aquifer system and is now reaching the depth zone used for public drinking water supply.

California

Hydrologic investigations and a preliminary conceptual model of the groundwater system at North Penn Area 1 Superfund Site, Souderton, Montgomery County, Pennsylvania

The U.S. Geological Survey (USGS) conducted hydrogeologic investigations, reviewed existing data, and developed a preliminary conceptual model of the groundwater system as part of technical support of the U.S. Environmental Protection Agency (EPA) at the North Penn Area 1 Superfund Site (hereafter, the NP1 Site) located within the Borough of Souderton in Montgomery County, Pennsylvania. Field work and monitoring took place during 2012–18. The area is underlain by sedimentary formations that form a fractured-rock aquifer used for drinking water and industrial supply. The EPA placed the Site on the National Priorities List in 1989, identifying tetrachloroethylene (PCE) and trichloroethylene (TCE) as contaminants of concern. During 2012–18, the USGS conducted field activities that included drilling an 82-foot (ft)-deep monitoring well (MG 2220) in 2016, reconstructing a 208-ft-deep former industrial production well (MG 668 [Granite Knitting Mill]), and collecting borehole geophysical and video logs and water levels from those and five additional wells, which ranged in depth from about 50 to 200 ft below land surface. Continuous water levels were collected during 2014–17, and a synoptic set of water levels were measured in April 2018 in the seven wells. The borehole geophysical logs (caliper, acoustic televiewer, natural gamma, single-point resistance, vertical flow, and fluid temperature and resistivity) and borehole video logs in the seven wells were evaluated to assess potential for lithologic correlation and to identify and describe water-bearing features, which included both low- and high-angle fractures and other openings oriented along dipping bedding planes, joints, or possible faults. Borehole geophysical logs collected by USGS in 1992 in a 300-ft-deep former production well near the Site were also evaluated. Few to no distinctive features were identified on geophysical logs (natural gamma and single-point resistance) that could be used for correlation, thus limiting this approach to determining local geologic structure. Extensive fracturing in the upper 62 ft of monitoring well MG 2220 indicates that the well was likely drilled through a zone of faulting, and other evidence of faulting is present in the area near the Site. Assessment of continuous water levels showed hydraulic connections among some wells as indicated by rising or falling water levels in response to changes in pumping rates at nearby wells. A map of water levels measured in April 2018 indicates potential for groundwater flow generally toward the stream to the south and southwest of the Site, but the limited water-level data are insufficient to describe vertical groundwater gradients or lateral gradients in any detail. Review of 1999–2022 volatile organic compound (VOC) monitoring data collected by the Pennsylvania Department of Environmental Protection for five monitoring wells indicates that the highest groundwater concentrations of PCE and TCE were found in samples from extraction well MG 2201 (S-1) downgradient from, and nearest to, the previously identified Site contaminant source area, and these concentrations fluctuated through time. PCE concentrations were higher than TCE concentrations in samples from all five monitoring wells and were much higher than TCE concentrations in samples from extraction well MG 2201 (S-1). Temporally variable recharge is a possible factor affecting observed fluctuations in PCE concentrations in groundwater samples from well extraction MG 2201 (S-1), as indicated by a general inverse relation between PCE concentrations and water levels in a nearby long-term observation well. The PCE concentration of 1,830 micrograms per liter (μg/L) in a May 2018 water sample from monitoring well MG 2220 was more than four times the PCE concentration of 444 μg/L in a December 2017 sample from the nearby extraction well MG 2201 (S-1), which is open to fewer fractures. Low concentrations of VOCs were measured in surface water at two stream sites downgradient from wells with the highest groundwater VOC concentrations at the Site, indicating that discharge of contaminated groundwater to the stream is likely. Development of a conceptual model of the groundwater system was constrained by limited data. In areas with no pumping, groundwater-flow directions generally are thought to be controlled by topography and geologic structure (bedding orientation) and likely to the south and southwest of the Site, with local flow directions affected by orientations of fractures, joints, and local faults. Additional investigations that could help improve the conceptual model of the groundwater system and help delineate the extent of groundwater contamination and its transport are discussed.

Pennsylvania

Groundwater quality and geochemistry of West Virginia’s southern coal fields

Coal mining has been the dominant industry and land use in West Virginia’s southern coal fields since the mid-1800s. Mortality rates for a variety of serious chronic conditions, such as diabetes, heart disease, and some forms of cancer in Appalachian coal mining regions, are higher than in areas lacking substantial coal mining activity within the Appalachian Region or elsewhere in the United States. Causes of the increased mortality and morbidity are not clear, but poor diet, high rates of smoking, socioeconomic factors, and the quality of groundwater used by area residents are all possible contributing factors. This study was conducted by the U.S. Geological Survey in cooperation with the West Virginia Department of Health and Human Resources and the West Virginia Department of Environmental Protection, with grant support from the Centers for Disease Control and Prevention (CDC) to assess the quality of groundwater in southern West Virginia. The data from this assessment of groundwater quality may be used by the CDC and other agencies to potentially investigate the role or lack thereof of groundwater quality with respect to mortality and morbidity rates in the region. The study was conducted in a region where a high density of current or past coal mining combined with a lack of advanced sewage treatment could affect concentrations of commonly occurring constituents plus contaminants, including nitrate, trace metals, major ions, indicator bacteria, radon, hydrogen sulfide, and dissolved hydrocarbons. Because rural residential wells and mine outfalls are considered private sources of water in the region, and are therefore unregulated and unmonitored, water-quality data are sparse. To fill the data gap and assess the groundwater quality in the region, water-quality samples were collected from 60 sites in a 10-county area. The 60 sites sampled included 46 rural residential homeowner wells and 14 mine outfall discharges used for residential supply. For this study, all samples were collected prior to any filtration or other treatments, typically at the pressure tank, and are indicative of total and dissolved constituents in the untreated water. Generally, data for the 60 sites indicate that most waters sampled do not exceed thresholds for most U.S. Environmental Protection Agency (EPA) drinking-water standards and U.S. Geological Survey (USGS) drinking-water screening criteria. However, there were several notable exceptions. Turbidity exceeded the 5-Nephelometric Turbidity Unit (NTU) EPA treatment technique (TT) drinking-water standard in 14 of 60 (23 percent) sites sampled and exceeded the 1-NTU TT standard in 51 of 60 (85 percent) sites sampled. Turbidity is common in many wells in southern West Virginia and may be attributed to iron oxyhydroxide precipitates, sediment carried into the aquifers from the shallow soil zone due to improperly constructed or cased wells or transported to the aquifer in shallow stress-relief fracture zones or through permeable bedding-plane partings. For the sites sampled, 31 of 60 (52 percent) had pH values at, above, or below the upper and lower range of the EPA Secondary Maximum Contaminant Level (SMCL, 6.5–8.5 standard units). Of those 31 sites, 28 (90 percent) were indicative of acidic corrosive water and 3 (10 percent) were indicative of alkaline water. The Langelier Saturation Index (LSI), which is a measure of the corrosivity of the water, was computed for all sites sampled for the study. Eighty-two percent of the sites sampled had waters that were classified as corrosive, based on a LSI less than −0.5. Corrosive water has the potential to leach lead, copper, and other metals from lead, copper, galvanized, or lead-tin soldered connections in water lines. The chloride to sulfate mass ratio also was assessed with the alkalinity to indicate the potential to promote galvanic corrosion (PPGC) of water lines and plumbing fixtures. Only one of the sites (1.7 percent) classified as a corrosive water site, had a PPGC considered high; the remaining sites were classified as having either a moderate (53.3 percent) or low (45 percent) PPGC. Therefore, the type of plumbing systems sampled for this study may be affected by corrosive water, but the potential for leaching trace metals and other constituents from residential plumbing systems containing older galvanized pipes or lead-tin soldered copper pipes is moderate to low. The indicator bacteria total coliform and Escherichia coli ( E. coli ) also were detected in groundwater samples to varying degrees. Total coliforms, which are a broad class of indicator bacteria, are common in groundwater in southern West Virginia and were detected in 39 of the 60 sites (65 percent) sampled. The presence of total coliform bacteria is a potential indicator of surface contamination, due to improperly constructed or cased wells, or infiltration of soil or other surface contaminants into the aquifer or well bore. E. coli bacteria, however, are much more indicative of fecal contamination of groundwater from either human or animal sources, and 14 of the 60 (23 percent) sites sampled had detections of E. coli . Although only a few strains of E. coli are known pathogens, their presence in groundwater may be an indicator of other related pathogens such as viruses and should be regarded as a serious potential issue. Water treatment such as chlorination, ozonation, or ultraviolet light may be appropriate to kill potential pathogenic bacteria or viruses in the source water. Manganese and iron were prevalent contaminants in the groundwater samples collected for this study, with 30 of 60 (50 percent) sites analyzed for manganese and 25 of 60 (42 percent) sites analyzed for iron exceeding the proposed 50- and 300-micrograms per liter (µg/L) SMCL drinking-water standards, respectively, for aesthetic criteria such as taste, odor, or staining of plumbing fixtures. Fourteen of the 60 sites sampled (23 percent) had concentrations of manganese that exceeded the 300-µg/L USGS health-based screening level, and 1 site exceeded the 1,600-µg/L EPA drinking-water equivalent level, which is based on a lifetime exposure level. Sodium is another common constituent in groundwater within the study area. Sodium has an EPA health-based value (HBV) of 20 milligrams per liter (mg/L) for individuals who are on a sodium-restricted diet for blood pressure or other health reasons. Sodium concentrations exceeded the 20-mg/L EPA HBV in 27 of 60 (45 percent) samples. Radon, a naturally occurring carcinogenic radioactive gas known to cause lung cancer, was detected at concentrations at or exceeding the proposed 300-picocuries per liter (pCi/L) EPA Maximum Contaminant Level (MCL) in 12 of the 60 (20 percent) sites sampled. Sites with radon gas concentrations exceeding the 300-pCi/L proposed MCL have the potential for airborne concentrations of radon to exceed the 4-pCi/L indoor air standard. Inhalation of radon can cause lung cancer, and the 4-pCi/L indoor air standard is based on an inhalation standard. Therefore, homeowners whose wells have radon gas concentrations exceeding 300 pCi/L may be advised to have their indoor air tested to determine if indoor air concentrations exceed the 4-pCi/L indoor air standard established by the EPA. Various factors were analyzed statistically and graphically to determine whether they have an influence on groundwater quality within the study area, including topographic setting, well depth, type of mining (surface or underground), type of site (well or mine outfall), and geologic formation. Only geologic formation and the type of site sampled had strong statistical correlations with one or more of the constituents of concern for this study. The overall chemistry of outfalls (mine outfalls) and wells was significantly different, with a much higher dissolved oxygen content in outfalls than in wells. The dissolved oxygen content is the primary component driving the oxidation and reduction of minerals, and the precipitation of minerals that are saturated or super saturated with respect to various cations and anions. Median dissolved oxygen concentrations for the outfalls sampled was 8.75 mg/L, and only 0.4 mg/L for the wells sampled. Median concentrations of sulfate and selenium were much higher in waters from the outfalls sampled, with median concentrations of 73.75 mg/L and 2.35 µg/L, respectively, compared to the wells sampled, which had median concentrations of 18.3 mg/L and less than (<) the 0.05-µg/L method detection limit, respectively. The maximum selenium concentration was for a well, with a concentration of 16.6 µg/L. The geochemical processes that control sulfate and selenium concentrations in groundwater are similar and are the result of the oxidation of sulfide minerals such as pyrite and ferroselite. Iron and manganese concentrations were elevated in most of the wells sampled, with median concentrations of 269.5 and 124.5 µg/L, respectively, but were rarely detected in the outfalls sampled, with median concentrations of < 4.0 and < 0.4 µg/L, respectively. The difference in iron and manganese between wells and outfalls is indicative of the role of dissolved oxygen on processes controlling groundwater chemistry in the region. Three principal geologic formations were assessed for the study, and the overall chemistry for the Pocahontas, New River, and Kanawha Formations varied substantially with respect to several constituents. Concentrations of calcium, magnesium, and total dissolved solids were highest for sites sampled in the Pocahontas Formation, with median concentrations of 41.9, 18.6, and 312 mg/L, respectively. For constituents that are commonly associated with mining activity, the highest concentrations were for sites sampled in the New River Formation, with median concentrations of iron and manganese of 2,450 µg/L and 482 µg/L, respectively, and a median pH of 6.35 standard units. Concentrations of barium also were elevated in samples collected from sites in the New River Formation, with a median barium concentration of 184 µg/L. The source of the barium is not fully known but may be associated with commingling of shallow groundwater with deeper brines or dissolution of the mineral barite. The highest median sulfate concentrations were from sites sampled in the Pocahontas Formation, with a median concentration of 64.0 mg/L. Of the 12 sites at or exceeding the 300-pCi/L proposed drinking-water standard for radon, 8 (67 percent of MCL exceedances) were for sites deriving water from the Kanawha Formation, 3 (25 percent of MCL exceedances) were for sites deriving water from the New River Formation, and only 1 site was for water from the Pocahontas Formation (8 percent of proposed MCL exceedances). Dissolved hydrocarbons, including methane, ethane, propane, propene, n - and i -butane, 1-butene, n - and i -pentane, pentane, 2- and 3-ethyl pentane, hexane, and benzene were analyzed in samples collected from 59 of the 60 sites to assess the potential occurrence and sources of these trace gases in groundwater within the study area. Results of the analysis indicate that most of the gas is of shallow biogenic origin, possibly associated with coal-bed methane, but a subset of samples has a gas signature and a chloride to bromide ratio indicative of potential mixing with deeper thermogenic gases. Only 2 of the 59 (3.3 percent) sites sampled had concentrations of methane gas, which is a highly combustible and explosive gas, exceeding the 10 milligrams per kilogram level of concern established by the U.S. Office of Surface Mining Reclamation and Enforcement. Principal components analysis was used to assess the primary geochemical processes occurring in the aquifers sampled. The first principal component had significant positive loadings for bromide, chloride, silica, ammonia, barium, iron, manganese, and arsenic, and significant negative loadings for dissolved oxygen, potassium, nitrate, and uranium, and reflects reduction and oxidation (redox) processes occurring in deeper anoxic groundwater or shallow oxic groundwater. The strong positive loadings for iron, manganese, barium, and arsenic are correlated with reducing conditions often found deeper in the aquifer. More oxic water is correlated with oxidation of nitrogen species to nitrate and environmental mobilization of uranium and sulfate in shallow wells and mine outfalls.

West Virginia