Search USGS⌕ Search

SEARCH · Search USGS

Results for “National Geographic Research”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12Linked to original sources
USGS2010

EAARL Coastal Topography-Sandy Hook Unit, Gateway National Recreation Area, New Jersey, Post-Nor'Ida, 2009

These remotely sensed, geographically referenced elevation measurements of lidar-derived bare-earth (BE) and first-surface (FS) topography datasets were produced collaboratively by the U.S. Geological Survey (USGS), St. Petersburg Coastal and Marine Science Center, St. Petersburg, FL, and the National Park Service (NPS), Northeast Coastal and Barrier Network, Kingston, RI. This project provides highly detailed and accurate datasets of a portion of the Sandy Hook Unit of Gateway National Recreation Area in New Jersey, acquired post-Nor'Ida (November 2009 nor'easter) on December 4, 2009. The datasets are made available for use as a management tool to research scientists and natural-resource managers. An innovative airborne lidar instrument originally developed at the NASA Wallops Flight Facility, and known as the Experimental Advanced Airborne Research Lidar (EAARL), was used during data acquisition. The EAARL system is a raster-scanning, waveform-resolving, green-wavelength (532-nanometer) lidar designed to map near-shore bathymetry, topography, and vegetation structure simultaneously. The EAARL sensor suite includes the raster-scanning, water-penetrating full-waveform adaptive lidar, a down-looking red-green-blue (RGB) digital camera, a high-resolution multispectral color infrared (CIR) camera, two precision dual-frequency kinematic carrier-phase GPS receivers, and an integrated miniature digital inertial measurement unit, which provide for sub-meter georeferencing of each laser sample. The nominal EAARL platform is a twin-engine aircraft, but the instrument was deployed on a Pilatus PC-6. A single pilot, a lidar operator, and a data analyst constitute the crew for most survey operations. This sensor has the potential to make significant contributions in measuring sub-aerial and submarine coastal topography within cross-environmental surveys. Elevation measurements were collected over the survey area using the EAARL system, and the resulting data were then processed using the Airborne Lidar Processing System (ALPS), a custom-built processing system developed in a NASA-USGS collaboration. ALPS supports the exploration and processing of lidar data in an interactive or batch mode. Modules for presurvey flight-line definition, flight-path plotting, lidar raster and waveform investigation, and digital camera image playback have been developed. Processing algorithms have been developed to extract the range to the first and last significant return within each waveform. ALPS is used routinely to create maps that represent submerged or sub-aerial topography. Specialized filtering algorithms have been implemented to determine the 'bare earth' under vegetation from a point cloud of last return elevations. For more information about similar projects, please visit the Decision Support for Coastal Science and Management website.

Data Series↗
USGS1988

Assessment of the role of bottomland hardwoods in sediment and erosion control

Drainage and clearing of bottomland hardwoods have long been recognized by the U.S. Environmental Protection Agency (EPA) and the U.S. Fish and Wildlife Service (Service) as important impacts of Federal water projects in the lower Mississippi River Valley. More recently, the water quality impacts of such projects (e.g., increases in sediments, nutrients, and pesticides) have also become of concern. In 1984, in an effort to better define problems concerning wetland losses and water degradation, EPA initiated a cooperative project with the Western Energy and Land Use Team (now the National Ecology Research Center) of the Service. Three phases of the project were identified: 1. To collect existing literature and data; 2. To select, develop, and test the utility of methods to quantify the relationships between land use, cover types, soils, hydrology, and water quality (as represented by sediment); and 3. To apply selected methodologies to several sites within the Yazoo Basin of Mississippi to determine the, potential effectiveness of various management alternatives to reduce sediment yield, increase sediment deposition, and improve water quality. Methods development focused on linking a simulation of water and sediment movement to a computerized geographic information system. We had several objectives for the resulting model. We desired that it should: 1. Estimate the importance of bottomland and hardwoods as a cover type that performs the functions of erosion and sediment control, 2. Simulate effects of proportions of ' various cover types and their specific spatial configurations, 3. Be applicable to moderately large spatial areas with minimal site-specific calibration, 4. Simulate spatial patterns of sediment loss-gain over time, and 5. Represent both sediment detachment and transport. While it was recognized that impacts and management alternatives could be sorted roughly into landscape measures and channel measures, the decision was made to focus study efforts mainly on landscape measures. Landscape measures include altered drainage and flooding patterns, altered cover types (e.g., conversion of bottomland hardwoods to agricultural crops, reforestation of cropland to bottomland hardwoods, and creation of riparian buffer strips), altered cropping and tillage patterns, altered routing of water, and creation of buffer strips along wetlands and channel margins. Channel measures include vegetative bank stabilization, grade control structures, and regulation of channel water volume and velocity. During the first year of the study, EPA decided not to fund the third phase of the project. This required considerable rescoping of the project with the result that application of the sediment mobilization, routing, and deposition models to various management alternatives and portions of the Yazoo Basin was somewhat restricted. We believe, however, that this report will provide a good understanding of the various modes of sediment mobilization, transport, and deposition within the Yazoo Basin, as well as of the role of bottomland hardwoods. The model developed in this study could be applied to a variety of management or mitigation alternatives prior to implementation to determine their relative effectiveness. Policy, political, and socio-economic consequences of any proposed management/mitigation practice, however, must ultimately be taken into consideration by those charged with management of water resources within the Yazoo Basin before any practice is implemented. This study makes no effort to judge the feasibility of management alternatives in this regard.

Report↗
USGS2010

EAARL Coastal Topography-Mississippi and Alabama Barrier Islands, Post-Hurricane Gustav, 2008

These remotely sensed, geographically referenced elevation measurements of lidar-derived bare-earth (BE) and first-surface (FS) topography datasets were produced collaboratively by the U.S. Geological Survey (USGS), St. Petersburg Coastal and Marine Science Center, St. Petersburg, FL; the National Park Service (NPS), Gulf Coast Network, Lafayette, LA; and the National Aeronautics and Space Administration (NASA), Wallops Flight Facility, VA. This project provides highly detailed and accurate datasets of a portion of the Mississippi and Alabama barrier islands, acquired post-Hurricane Gustav (September 2008 hurricane) on September 8, 2008. The datasets are made available for use as a management tool to research scientists and natural-resource managers. An innovative airborne lidar instrument originally developed at the NASA Wallops Flight Facility, and known as the Experimental Advanced Airborne Research Lidar (EAARL), was used during data acquisition. The EAARL system is a raster-scanning, waveform-resolving, green-wavelength (532-nanometer) lidar designed to map near-shore bathymetry, topography, and vegetation structure simultaneously. The EAARL sensor suite includes the raster-scanning, water-penetrating full-waveform adaptive lidar, a down-looking red-green-blue (RGB) digital camera, a high-resolution multispectral color infrared (CIR) camera, two precision dual-frequency kinematic carrier-phase GPS receivers, and an integrated miniature digital inertial measurement unit, which provide for sub-meter georeferencing of each laser sample. The nominal EAARL platform is a twin-engine Cessna 310 aircraft, but the instrument may be deployed on a range of light aircraft. A single pilot, a lidar operator, and a data analyst constitute the crew for most survey operations. This sensor has the potential to make significant contributions in measuring sub-aerial and submarine coastal topography within cross-environmental surveys. Elevation measurements were collected over the survey area using the EAARL system, and the resulting data were then processed using the Airborne Lidar Processing System (ALPS), a custom-built processing system developed in a NASA-USGS collaboration. ALPS supports the exploration and processing of lidar data in an interactive or batch mode. Modules for presurvey flight-line definition, flight-path plotting, lidar raster and waveform investigation, and digital camera image playback have been developed. Processing algorithms have been developed to extract the range to the first and last significant return within each waveform. ALPS is used routinely to create maps that represent submerged or sub-aerial topography. Specialized filtering algorithms have been implemented to determine the 'bare earth' under vegetation from a point cloud of last return elevations. For more information about similar projects, please visit the Decision Support for Coastal Science and Management website.

Data Series↗
USGS2010

EAARL coastal topography-Cape Hatteras National Seashore, North Carolina, post-Nor'Ida, 2009: first surface

These remotely sensed, geographically referenced elevation measurements of lidar-derived first-surface (FS) topography datasets were produced collaboratively by the U.S. Geological Survey (USGS), St. Petersburg Coastal and Marine Science Center, St. Petersburg, FL, and the National Park Service (NPS), Northeast Coastal and Barrier Network, Kingston, RI. This project provides highly detailed and accurate datasets of a portion of the National Park Service Southeast Coast Network's Cape Hatteras National Seashore in North Carolina, acquired post-Nor'Ida (November 2009 nor'easter) on November 27 and 29 and December 1, 2009. The datasets are made available for use as a management tool to research scientists and natural-resource managers. An innovative airborne lidar instrument originally developed at the NASA Wallops Flight Facility, and known as the Experimental Advanced Airborne Research Lidar (EAARL), was used during data acquisition. The EAARL system is a raster-scanning, waveform-resolving, green-wavelength (532-nanometer) lidar designed to map near-shore bathymetry, topography, and vegetation structure simultaneously. The EAARL sensor suite includes the raster-scanning, water-penetrating full-waveform adaptive lidar, a down-looking red-green-blue (RGB) digital camera, a high-resolution multispectral color-infrared (CIR) camera, two precision dual-frequency kinematic carrier-phase GPS receivers, and an integrated miniature digital inertial measurement unit, which provide for sub-meter georeferencing of each laser sample. The nominal EAARL platform is a twin-engine aircraft, but the instrument was deployed on a Pilatus PC-6. A single pilot, a lidar operator, and a data analyst constitute the crew for most survey operations. This sensor has the potential to make significant contributions in measuring sub-aerial and submarine coastal topography within cross-environmental surveys. Elevation measurements were collected over the survey area using the EAARL system, and the resulting data were then processed using the Airborne Lidar Processing System (ALPS), a custom-built processing system developed in a NASA-USGS collaboration. ALPS supports the exploration and processing of lidar data in an interactive or batch mode. Modules for presurvey flight-line definition, flight-path plotting, lidar raster and waveform investigation, and digital camera image playback have been developed. Processing algorithms have been developed to extract the range to the first and last significant return within each waveform. ALPS is used routinely to create maps that represent submerged or sub-aerial topography. Specialized filtering algorithms have been implemented to determine the 'bare earth' under vegetation from a point cloud of last return elevations. For more information about similar projects, please visit the Decision Support for Coastal Science and Management website.

Data Series↗
USGS2011

EAARL Coastal Topography-Cape Hatteras National Seashore, North Carolina, Post-Nor'Ida, 2009: Bare Earth

These remotely sensed, geographically referenced elevation measurements of lidar-derived bare-earth (BE) topography datasets were produced collaboratively by the U.S. Geological Survey (USGS), St. Petersburg Coastal and Marine Science Center, St. Petersburg, FL, and the National Park Service (NPS), Northeast Coastal and Barrier Network, Kingston, RI. This project provides highly detailed and accurate datasets of a portion of the National Park Service Southeast Coast Network's Cape Hatteras National Seashore in North Carolina, acquired post-Nor'Ida (November 2009 nor'easter) on November 27 and 29 and December 1, 2009. The datasets are made available for use as a management tool to research scientists and natural-resource managers. An innovative airborne lidar instrument originally developed at the NASA Wallops Flight Facility, and known as the Experimental Advanced Airborne Research Lidar (EAARL), was used during data acquisition. The EAARL system is a raster-scanning, waveform-resolving, green-wavelength (532-nanometer) lidar designed to map near-shore bathymetry, topography, and vegetation structure simultaneously. The EAARL sensor suite includes the raster-scanning, water-penetrating full-waveform adaptive lidar, a down-looking red-green-blue (RGB) digital camera, a high-resolution multispectral color-infrared (CIR) camera, two precision dual-frequency kinematic carrier-phase GPS receivers, and an integrated miniature digital inertial measurement unit, which provide for sub-meter georeferencing of each laser sample. The nominal EAARL platform is a twin-engine aircraft, but the instrument was deployed on a Pilatus PC-6. A single pilot, a lidar operator, and a data analyst constitute the crew for most survey operations. This sensor has the potential to make significant contributions in measuring sub-aerial and submarine coastal topography within cross-environmental surveys. Elevation measurements were collected over the survey area using the EAARL system, and the resulting data were then processed using the Airborne Lidar Processing System (ALPS), a custom-built processing system developed in a NASA-USGS collaboration. ALPS supports the exploration and processing of lidar data in an interactive or batch mode. Modules for presurvey flight-line definition, flight-path plotting, lidar raster and waveform investigation, and digital camera image playback have been developed. Processing algorithms have been developed to extract the range to the first and last significant return within each waveform. ALPS is used routinely to create maps that represent submerged or sub-aerial topography. Specialized filtering algorithms have been implemented to determine the 'bare earth' under vegetation from a point cloud of last return elevations.

Data Series↗
USGS2011

U.S. Geological Survey Community for Data Integration-NWIS Web Services Snapshot Tool for ArcGIS

U.S. Geological Survey (USGS) data resources are so vast that many scientists are unaware of data holdings that may be directly relevant to their research. Data are also difficult to access and large corporate databases, such as the National Water Information System (NWIS) that houses hydrologic data for the Nation, are challenging to use without considerable expertise and investment of time. The USGS Community for Data Integration (CDI) was established in 2009 to address data and information management issues affecting the proficiency of earth science research. A CDI workshop convened in 2009 identified common data integration needs of USGS scientists and targeted high value opportunities that might address these needs by leveraging existing projects in USGS science centers, in-kind contributions, and supplemental funding. To implement this strategy, CDI sponsored a software development project in 2010 to facilitate access and use of NWIS data with ArcGIS, a widely used Geographic Information System. The resulting software product, the NWIS Web Services Snapshot Tool for ArcGIS, is presented here.

Fact Sheet↗
USGS2010

EAARL Coastal Topography and Imagery-Naval Live Oaks Area, Gulf Islands National Seashore, Florida, 2007

These remotely sensed, geographically referenced color-infrared (CIR) imagery and elevation measurements of lidar-derived bare-earth (BE) topography, first-surface (FS) topography, and canopy-height (CH) datasets were produced collaboratively by the U.S. Geological Survey (USGS), St. Petersburg Science Center, St. Petersburg, FL; the National Park Service (NPS), Gulf Coast Network, Lafayette, LA; and the National Aeronautics and Space Administration (NASA), Wallops Flight Facility, VA. This project provides highly detailed and accurate datasets of the Naval Live Oaks Area in Florida's Gulf Islands National Seashore, acquired June 30, 2007. The datasets are made available for use as a management tool to research scientists and natural-resource managers. An innovative airborne lidar instrument originally developed at the NASA Wallops Flight Facility, and known as the Experimental Advanced Airborne Research Lidar (EAARL), was used during data acquisition. The EAARL system is a raster-scanning, waveform-resolving, green-wavelength (532-nanometer) lidar designed to map near-shore bathymetry, topography, and vegetation structure simultaneously. The EAARL sensor suite includes the raster-scanning, water-penetrating full-waveform adaptive lidar, a down-looking red-green-blue (RGB) digital camera, a high-resolution multispectral CIR camera, two precision dual-frequency kinematic carrier-phase GPS receivers, and an integrated miniature digital inertial measurement unit, which provide for sub-meter georeferencing of each laser sample. The nominal EAARL platform is a twin-engine Cessna 310 aircraft, but the instrument may be deployed on a range of light aircraft. A single pilot, a lidar operator, and a data analyst constitute the crew for most survey operations. This sensor has the potential to make significant contributions in measuring sub-aerial and submarine coastal topography within cross-environmental surveys. Elevation measurements were collected over the survey area using the EAARL system, and the resulting data were then processed using the Airborne Lidar Processing System (ALPS), a custom-built processing system developed in a NASA-USGS collaboration. ALPS supports the exploration and processing of lidar data in an interactive or batch mode. Modules for presurvey flight-line definition, flight-path plotting, lidar raster and waveform investigation, and digital camera image playback have been developed. Processing algorithms have been developed to extract the range to the first and last significant return within each waveform. ALPS is used routinely to create maps that represent submerged or sub-aerial topography. Specialized filtering algorithms have been implemented to determine the 'bare earth' under vegetation from a point cloud of last return elevations. For more information about similar projects, please visit the Decision Support for Coastal Science and Management website.

Data Series↗
USGS2010

EAARL Coastal Topography and Imagery-Assateague Island National Seashore, Maryland and Virginia, Post-Nor'Ida, 2009

These remotely sensed, geographically referenced color-infrared (CIR) imagery and elevation measurements of lidar-derived bare-earth (BE) and first-surface (FS) topography datasets were produced collaboratively by the U.S. Geological Survey (USGS), St. Petersburg Coastal and Marine Science Center, St. Petersburg, FL, and the National Park Service (NPS), Northeast Coastal and Barrier Network, Kingston, RI. This project provides highly detailed and accurate datasets of a portion of the Assateague Island National Seashore in Maryland and Virginia, acquired post-Nor'Ida (November 2009 nor'easter) on November 28 and 30, 2009. The datasets are made available for use as a management tool to research scientists and natural-resource managers. An innovative airborne lidar instrument originally developed at the NASA Wallops Flight Facility, and known as the Experimental Advanced Airborne Research Lidar(EAARL), was used during data acquisition. The EAARL system is a raster-scanning, waveform-resolving, green-wavelength (532-nanometer) lidar designed to map near-shore bathymetry, topography, and vegetation structure simultaneously. The EAARL sensor suite includes the raster-scanning, water-penetrating full-waveform adaptive lidar, a down-looking red-green-blue (RGB) digital camera, a high-resolution multispectral color-infrared (CIR) camera, two precision dual-frequency kinematic carrier-phase GPS receivers, and an integrated miniature digital inertial measurement unit, which provide for sub-meter georeferencing of each laser sample. The nominal EAARL platform is a twin-engine aircraft, but the instrument was deployed on a Pilatus PC-6. A single pilot, a lidar operator, and a data analyst constitute the crew for most survey operations. This sensor has the potential to make significant contributions in measuring sub-aerial and submarine coastal topography within cross-environmental surveys. Elevation measurements were collected over the survey area using the EAARL system, and the resulting data were then processed using the Airborne Lidar Processing System (ALPS), a custom-built processing system developed in a NASA-USGS collaboration. ALPS supports the exploration and processing of lidar data in an interactive or batch mode. Modules for presurvey flight-line definition, flight-path plotting, lidar raster and waveform investigation, and digital camera image playback have been developed. Processing algorithms have been developed to extract the range to the first and last significant return within each waveform. ALPS is used routinely to create maps that represent submerged or sub-aerial topography. Specialized filtering algorithms have been implemented to determine the 'bare earth' under vegetation from a point cloud of last return elevations. For more information about similar projects, please visit the Decision Support for Coastal Science and Management website.

Data Series↗
USGS2011

Effects of acid deposition on ecosystems: Advances in the state of the science

Chapter 2 focused on the environmental results of the ARP, presenting data from national monitoring networks on SO2 and NOx emissions, air quality, atmospheric deposition, surface water chemistry, and visibility. This chapter expands on this information by examining the most recent research into how ecosystems respond to acid deposition, especially the processes that control the recovery of ecosystems as acid deposition decreases. In Chapter 2, two general trends were discussed regarding the current recovery status of affected ecosystems: (1) these ecosystems are trending generally towards recovery, but improvements in ecosystem condition shown by surface water chemistry monitoring data thus far have been less than the improvements in deposition; and (2) ecosystem impacts and trends vary widely by geographic region, but the evidence of improvement is strongest and most evident in the Northeast. These trends are not uniform across the United States, however, and in some regions (e.g., central Appalachian Mountain region), trends in improved water quality are generally not evident. Despite the strong link in many areas between reduced emissions and reduced acidity of atmospheric deposition, the link is less clear between reduced acidity and recovery of the biological communities that live in aquatic and terrestrial ecosystems that have experienced deleterious effects from acid deposition. The recovery of these communities is proceeding at a slower pace than, for example, the improvements in stream and lake ANC would indicate. The goal of this chapter is to synthesize the science in a weightof-evidence manner to provide policy makers with tangible evidence and likely causative factors regarding ecosystem status and recovery patterns to date. This chapter serves as an update to the 2005 NAPAP RTC (NSTC, 2005), with an emphasis on scientific studies and monitoring since 2003, which was the last year for consideration of research results in the 2005 report. Several issues pertinent to ecosystem response to emission controls and acid deposition are receiving increasing attention in the scientific literature and will be discussed in this chapter, including the (1) observed delay in ecosystem recovery in the eastern United States, even with decreases in emissions and deposition over the past 30 years; (2) emerging ecosystem impacts of nitrogen deposition in the western United States; (3) the application of critical deposition loads as a tool for scientists to better inform air quality policies; (4) the role of changes in climate and the carbon cycle as factors that affect the response of ecosystems to acid deposition; and (5) the interaction of multiple pollutants in ecosystems. Throughout this chapter, the value of long-term environmental monitoring data in informing air quality policy will be highlighted, including the limitations of assessing the current status of some ecosystem indicators for which continuous, long-term data are lacking.

Report↗
USGS1990

Tuberculosis in wild birds: implications for captive birds

The geographic distribution of avian tuberculosis is widespread but the lack of visible epizootics makes assessment of its impact on wild birds difficult. Generally a low prevalence, widely-scattered, individual animal disease, avian tuberculosis is caused by the same agent in wild and domestic birds. Thus there exists the potential for disease transfer between these two groups in situations that result in direct contact such as wild animals newly captured or transferred from rehabilitation centers, and wild and captive animals intermingling in exhibit areas. During the past 7 yr, tuberculosis caused by Mycobacterium avium, was diagnosed in 64 birds submitted to the National Wildlife Health Research Center from 16 states; avian tuberculosis was the primary diagnosis in 52 of the 64 birds, while the remaining 12 isolates were incidental findings. Twenty-eight of these birds were picked up during epizootics caused by other disease agents including avian cholera, botulism type C, and lead, organophosphorus compound, and cyanide poisoning. Twelve birds were found incidental to birds collected during disease monitoring programs and research projects, and 10 birds were collected by hunters or found sick and euthanatized. Tuberculosis lesions occurred (in order of decreasing frequency) in the liver, intestine, spleen, lung, and air sacs. Several unusual morphological presentations were observed in the gizzard, shoulder joint, jugular vein, face, nares and bill, ureter and bone marrow. Infected birds were collected during all 12 mo of the yr from a variety of species in the Anseriformes, Podicipediformes, Gruiformes, and Falconiformes. Nine of the 46 known age birds were immature indicating that lesions can develop during the first year.

Book↗
USGS1988

Evaluation of the state water-resources research institutes

Water resources research institutes, as authorized by the Water Resources Research Act of 1984 (Public Law 98-242), are located in each state and in the District of Columbia, Guam, Puerto Rico , and the Virgin Islands. Public Law 98-242 mandated an onsite evaluation of each of these institutes to determine whether ' . . .the quality and relevance of its water resources research and its effectiveness as an institution for planning, conducting, and arranging for research warrant its continued support in the national interest. ' The results of these evaluations, which were conducted between September 1985 and June 1987, are summarized. The evaluation teams found that all 54 institutes are meeting the basic objectives of the authorizing legislation in that they: (1) use the grant funds to support research that addresses water problems of state and regional concern; (2) provide opportunities for training of water scientists through student involvement on research projects; and (3) promote the application of research results through preparation of technical reports and contributions to the technical literature. The differences among institutes relate primarily to degrees of effectiveness, and most often are determined by the financial, political, and geographical contexts in which the institutes function and by the quality of their leadership. (Lantz-PTT)

Open-File Report↗
USGS1984

RESEARCH FOR THE USGS DIGITAL CARTOGRAPHY PROGRAM.

The U. S. Geological Survey National Mapping Division (NMD) has been conducting research and development in digital cartography since the early seventies. Since 1977 there has been an acceleration of activities associated with establishing a National Digital Cartographic Data Base (NDCDB). The NMD Office of Research is primarily responsible for fundamental and applied research together with systems development and technical standards to support the digital cartographic program. Three phases of development have been defined - the current system, an optimum system that can be built with current technology, and a future system that could be defined after some basic research is completed. Some of the current projects related to automated data capture, editing, coding, and structuring are described together with a perspective on future directions. The overall rationale is to develop a very large integrated system that will support a NDCDB and lead toward operational geographic information systems.

Conference Paper↗
USGS2016

Predictors of current and longer-term patterns of abundance of American pikas ( Ochotona princeps ) across a leading-edge protected area

American pikas ( Ochotona princeps ) have been heralded as indicators of montane-mammal response to contemporary climate change. Pikas no longer occupy the driest and lowest-elevation sites in numerous parts of their geographic range. Conversely, pikas have exhibited higher rates of occupancy and persistence in Rocky Mountain and Sierra Nevada montane ‘mainlands’. Research and monitoring efforts on pikas across the western USA have collectively shown the nuance and complexity with which climate will often act on species in diverse topographic and climatic contexts. However, to date no studies have investigated habitat, distribution, and abundance of pikas across hundreds of sites within a remote wilderness area. Additionally, relatively little is known about whether climate acts most strongly on pikas through direct or indirect (e.g., vegetation-mediated) mechanisms. During 2007–2009, we collectively hiked >16,000 km throughout the 410,077-ha Glacier National Park, Montana, USA, in an effort to identify topographic, microrefugial, and vegetative characteristics predictive of pika abundance. We identified 411 apparently pika-suitable habitat patches with binoculars ( in situ ), and surveyed 314 of them for pika signs. Ranking of alternative logistic-regression models based on AIC c scores revealed that short-term pika abundances were positively associated with intermediate elevations, greater cover of mosses, and taller forbs, and decreased each year, for a total decline of 68% during the three-year study; whereas longer-term abundances were associated only with static variables (longitude, elevation, gradient) and were lower on north-facing slopes. Earlier Julian date and time of day of the survey (i.e., midday vs. not) were associated with lower observed pika abundance. We recommend that wildlife monitoring account for this seasonal and diel variation when surveying pikas. Broad-scale information on status and abundance determinants of montane mammals, especially for remote protected areas, is crucial for land and wildlife-resource managers trying to anticipate mammalian responses to climate change.

Montana↗
USGS2004

Incorporating uncertainty into mercury-offset decisions with a probabilistic network for National Pollutant Discharge Elimination System permit holders: An interim report

This interim report describes an alternative approach for evaluating the efficacy of using mercury (Hg) offsets to improve water quality. Hg-offset programs may allow dischargers facing higher-pollution control costs to meet their regulatory obligations by making more cost effective pollutant-reduction decisions. Efficient Hg management requires methods to translate that science and economics into a regulatory decision framework. This report documents the work in progress by the U.S. Geological Survey’s Western Geographic Science Center in collaboration with Stanford University toward developing this decision framework to help managers, regulators, and other stakeholders decide whether offsets can cost effectively meet the Hg total maximum daily load (TMDL) requirements in the Sacramento River watershed. Two key approaches being considered are: (1) a probabilistic approach that explicitly incorporates scientific uncertainty, cost information, and value judgments; and (2) a quantitative approach that captures uncertainty in testing the feasibility of Hg offsets. Current fate and transport-process models commonly attempt to predict chemical transformations and transport pathways deterministically. However, the physical, chemical, and biologic processes controlling the fate and transport of Hg in aquatic environments are complex and poorly understood. Deterministic models of Hg environmental behavior contain large uncertainties, reflecting this lack of understanding. The uncertainty in these underlying physical processes may produce similarly large uncertainties in the decisionmaking process. However, decisions about control strategies are still being made despite the large uncertainties in current Hg loadings, the relations between total Hg (HgT) loading and methylmercury (MeHg) formation, and the relations between control efforts and Hg content in fish. The research presented here focuses on an alternative analytical approach to the current use of safety factors and deterministic methods for Hg TMDL decision support, one that is fully compatible with an adaptive management approach. This alternative approach uses empirical data and informed judgment to provide a scientific and technical basis for helping National Pollutant Discharge Elimination System (NPDES) permit holders make management decisions. An Hg-offset system would be an option if a wastewater-treatment plant could not achieve NPDES permit requirements for HgT reduction. We develop a probabilistic decision-analytical model consisting of three submodels for HgT loading, MeHg, and cost mitigation within a Bayesian network that integrates information of varying rigor and detail into a simple model of a complex system. Hg processes are identified and quantified by using a combination of historical data, statistical models, and expert judgment. Such an integrated approach to uncertainty analysis allows easy updating of prediction and inference when observations of model variables are made. We demonstrate our approach with data from the Cache Creek watershed (a subbasin of the Sacramento River watershed). The empirical models used to generate the needed probability distributions are based on the same empirical models currently being used by the Central Valley Regional Water Quality Control Cache Creek Hg TMDL working group. The significant difference is that input uncertainty and error are explicitly included in the model and propagated throughout its algorithms. This work demonstrates how to integrate uncertainty into the complex and highly uncertain Hg TMDL decisionmaking process. The various sources of uncertainty are propagated as decision risk that allows decisionmakers to simultaneously consider uncertainties in remediation/implementation costs while attempting to meet environmental/ecologic targets. We must note that this research is on going. As more data are collected, the HgT and cost-mitigation submodels are updated and the uncertainties may be reduced. Subsequently, the value of using a probabilistic framework for estimating and explicitly stating these uncertainties within a decisionmaking process can be estimated when new data are collected. Future work includes the design and implementation of a Bayesian network decision support system (BN-DSS) to produce mitigation scenarios for offset-project evaluation in the Cache Creek watershed. The decisionmaker, a wastewater-treatment plant, is expected to evaluate potential Hg-offset programs in terms of changes in HgT load changes, MeHg-production potential, project cost, and other suitability criteria. Subsequently, scenarios can be analyzed by performing sensitivity analyses and ranking environmental and economic uncertainties in terms of the decisionmaker’s preferences and risk choices. Such an analysis allows decisionmakers and stakeholders to explore various scenarios and predict the consequences of different stated preferences over outcomes.

Open-File Report↗
USGS1997

Strategic plan for the National Mapping Divison of the U.S. Geological Survey

The National Mapping Division (NMD) has developed this comprehensive strategic plan to chart its course over the next decade. To meet the challenge of the future, the NMD is changing its program emphasis, methods of responding to customer need and business practices. The NMD Strategic Plan identifies the new direction for the Division through a series of goals and actions for managers to use in formulating plans, establishing program emphasis, and determining resource needs and allocations into the next century. The Plan refines the NMD mission on the basis of several key issues that are expected to face the Division in the next decade. Th first of these is the continuing advances in technology and telecommunications. Related to this is the growth in the use of geographic information systems (GIS) and the demand for data to use in GIS's. Also, a trend exists toward decreasing cost of both the data and the systems, leading to even more demand for and use of data and technology by more users. Another is a changing customer base and increasing demand for NMD products and services. Finally, the financial resource available to the NMD are anticipated to remain relatively static. The Plan assumes that a much greater reliance on partnerships with other government agencies and the private sector for production activities will be permanent. It calls for significantly greater emphasis on the inherently governmental information management responsibilities and on geographic research to support the Division's mission. Multipartner consortia and shared funding agreements will constitute the basis for meeting most mapping needs in the future, with the NMD appropriation focused on map revision in areas of importance to the Federal Government. Mapping Centers will be encouraged to increase partnership agreements to meet mission requirements. The Division will continue to constrain employment, targeting new hiring to specific skills needed to support the revised mission in areas such as quality assurance, data standards development and maintenance, contract management, and information management. Retraining opportunities for current employees will be a high priority. The Bureau Strategic Plan was reviewed carefully to assure that the NMD Strategic Plan would be consistent with it. The Division planning team built on the conclusion of the Bureau Plan regarding the political, economic, societal, and global force that will affect our program in the future. The NMD Strategic Plan also embraces all of the core competencies and business activities.

Report↗
USGS2019

Regional Global Navigation Satellite System networks for crustal deformation monitoring

Regional networks of Global Navigation Satellite System (GNSS) stations cover seismically and volcanically active areas throughout the United States. Data from these networks have been used to produce high‐precision, three‐component velocity fields covering broad geographic regions as well as position time series that track time‐varying crustal deformation. This information has contributed to assessing interseismic strain accumulation and related seismic hazard, revealed previously unknown occurrences of aseismic fault slip, constrained coseismic slip estimates, and enabled monitoring of volcanic unrest and postseismic deformation. In addition, real‐time GNSS data are now widely available. Such observations proved invaluable for tracking the rapidly evolving eruption of Kīlauea in 2018. Real‐time earthquake source modeling using GNSS data is being incorporated into tsunami warning systems, and a vigorous research effort is focused on quantifying the contribution that real‐time GNSS can make to improve earthquake early warnings as part of the Advanced National Seismic System ShakeAlert system. Real‐time GNSS data can also aid in the tracking of ionospheric disturbances and precipitable water vapor for weather forecasting. Although regional GNSS and seismic networks generally have been established independently, their spatial footprints often overlap, and in some cases the same institution operates both types of networks. Further integration of GNSS and seismic networks would promote joint use of the two data types to better characterize earthquake sources and ground motion as well as offer opportunities for more efficient network operations. Looking ahead, upgrading network stations to leverage new GNSS technology could enable more precise positioning and robust real‐time operations. New computational approaches such as machine learning have the potential to enable full utilization of the large amounts of data generated by continuous GNSS networks. Development of seafloor Global Positioning System‐acoustic networks would provide unique information for fundamental and applied research on subduction zone seismic hazard and, potentially, monitoring.

Seismological Research Letters↗
USGS2007

Invasive species management and research using GIS

Geographical Information Systems (GIS) are powerful tools in the field of invasive species management. GIS can be used to create potential distribution maps for all manner of taxa, including plants, animals, and diseases. GIS also performs well in the early detection and rapid assessment of invasive species. Here, we used GIS applications to investigate species richness and invasion patterns in fish in the United States (US) at the 6-digit Hydrologic Unit Code (HUC) level. We also created maps of potential spread of the cane toad (Bufo marinus) in the southeastern US at the 8-digit HUC level using regression and environmental envelope techniques. Equipped with this potential map, resource managers can target their field surveys to areas most vulnerable to invasion. Advances in GIS technology, maps, data, and many of these techniques can be found on websites such as the National Institute of Invasive Species Science (www.NIISS.org). Such websites provide a forum for data sharing and analysis that is an invaluable service to the invasive species community.

Conference Paper↗
USGS2009

Climate change adaptation for the US National Wildlife Refuge System

Since its establishment in 1903, the National Wildlife Refuge System (NWRS) has grown to 635 units and 37 Wetland Management Districts in the United States and its territories. These units provide the seasonal habitats necessary for migratory waterfowl and other species to complete their annual life cycles. Habitat conversion and fragmentation, invasive species, pollution, and competition for water have stressed refuges for decades, but the interaction of climate change with these stressors presents the most recent, pervasive, and complex conservation challenge to the NWRS. Geographic isolation and small unit size compound the challenges of climate change, but a combined emphasis on species that refuges were established to conserve and on maintaining biological integrity, diversity, and environmental health provides the NWRS with substantial latitude to respond. Individual symptoms of climate change can be addressed at the refuge level, but the strategic response requires system-wide planning. A dynamic vision of the NWRS in a changing climate, an explicit national strategic plan to implement that vision, and an assessment of representation, redundancy, size, and total number of units in relation to conservation targets are the first steps toward adaptation. This adaptation must begin immediately and be built on more closely integrated research and management. Rigorous projections of possible futures are required to facilitate adaptation to change. Furthermore, the effective conservation footprint of the NWRS must be increased through land acquisition, creative partnerships, and educational programs in order for the NWRS to meet its legal mandate to maintain the biological integrity, diversity, and environmental health of the system and the species and ecosystems that it supports.

Environmental Management↗