SEARCH · Search USGS

Results for “Input”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12Linked to original sources

USGS2009

Water Quality and Hydrology of Silver Lake, Barron County, Wisconsin, With Special Emphasis on Responses of a Terminal Lake to Changes in Phosphorus Loading and Water Level

Silver Lake is typically an oligotrophic-to-mesotrophic, soft-water, terminal lake in northwestern Wisconsin. A terminal lake is a closed-basin lake with surface-water inflows but no surface-water outflows to other water bodies. After several years with above-normal precipitation, very high water levels caused flooding of several buildings near the lake and erosion of soil around much of the shoreline, which has been associated with a degradation in water quality (increased phosphorus and chlorophyll a concentrations and decreased water clarity). To gain a better understanding of what caused the very high water levels and degradation in water quality and collect information to better understand the lake and protect it from future degradation, the U.S. Geological Survey did a detailed study from 2004 to 2008. This report describes results of the study; specifically, lake-water quality, historical changes in water level, water and phosphorus budgets for the two years monitored in the study, results of model simulations that demonstrate how changes in phosphorus inputs affect lake-water quality, and the relative importance of changes in hydrology and changes in the watershed to the water quality of the lake. From 1987 to about 1996, water quality in Silver Lake was relatively stable. Since 1996, however, summer average total phosphorus concentrations increased from about 0.008 milligrams per liter (mg/L) to 0.018 mg/L in 2003, before decreasing to 0.011 mg/L in 2008. From 1996 to 2003, Secchi depths decreased from about 14 to 7.4 feet, before increasing to about 19 feet in 2008. Therefore, Silver Lake is typically classified as oligotrophic to mesotrophic; however, during 2002-4, the lake was classified as mesotrophic to eutrophic. Because productivity in Silver Lake is limited by phosphorus, phosphorus budgets for the lake were constructed for monitoring years 2005 and 2006. The average annual input of phosphorus was 216 pounds: 78 percent from tributary and nearshore runoff and 22 percent from atmospheric deposition. Because Silver Lake is hydraulically mounded above the local groundwater system, little or no input of phosphorus to the lake is from groundwater and septic systems. Silver Lake had previously been incorrectly described as a groundwater flowthrough lake. Phosphorus budgets were constructed for a series of dry years (low water levels) and a series of wet years (high water levels). About 6 times more phosphorus was input to the lake during wet years with high water levels than during the dry years. Phosphorus from erosion represented 13-20 percent of the phosphorus input during years with very high water levels. Results from the Canfield and Bachman eutrophication model and Carlson trophic state index equations demonstrated that water quality in Silver Lake directly responds to changes in external phosphorus input, with the percent change in chlorophyll a being about 80 percent of the percent change in total phosphorus input and the change in Secchi depth and total phosphorus concentrations being about 40 and 50 percent of the percent change in input, respectively. Therefore, changes in phosphorus input should impact water quality. Specific scenarios were simulated with the models to describe the effects of natural (climate-driven) and anthropogenic (human-induced) changes. Results of these scenarios demonstrated that several years of above-normal precipitation cause sustained high water levels and a degradation in water quality, part of which is due to erosion of the shoreline. Results also demonstrated that 1) changes in tributary and nearshore runoff have a dramatic effect on lake-water quality, 2) diverting water into the lake to increase the water level is expected to degrade the water quality, and 3) removal of water to decrease the water level of the lake is expected to have little effect on water quality. Fluctuations in water levels since 1967, when records began for the lake, are representative

Scientific Investigations Report↗

USGS2007

Nutrient mass balance for the Albemarle-Pamlico Drainage Basin, North Carolina and Virginia, 1990

A 1990 nitrogen and phosphorus mass balance calculated for eight National Stream Quality Accounting Network (NASQAN) basins in the Albemarle-Pamlico Drainage Basin indicated the importance of agricultural nonpoint sources of nitrogen and phosphorus and watershed nitrogen retention and processing capabilities. Basin total nitrogen and phosphorus input estimates were calculated for atmospheric deposition (which averaged 27 percent of total nitrogen inputs and 22 percent of total phosphorus inputs); crop fertilizer (27 and 25 percent); animal-waste (22 and 50 percent, respectively); point sources (3 percent each of total nitrogen and total phosphorus inputs); and biological nitrogen fixation (21 percent of total nitrogen inputs). Highest in-stream nitrogen and phosphorus loads were measured in predominantly agricultural drainage areas. Intermediate loads were observed in mixed agricultural/urban drainage areas; the lowest loads were measured in mixed agricultural/forested drainage areas. The difference between the sum of the nutrient input categories and the sum of the instream nutrient loads and crop-harvest nutrient removal was assigned to a residual category for the basin. The residual category averaged 51 percent of total nitrogen inputs and 54 percent of total phosphorus inputs.

Journal of the American Water Resources Associatio↗

USGS2010

Hydrology, water quality, and response to changes in phosphorus loading of Minocqua and Kawaguesaga Lakes, Oneida County, Wisconsin, with special emphasis on effects of urbanization

Minocqua and Kawaguesaga Lakes are 1,318- and 690-acre interconnected lakes in the popular recreation area of north-central Wisconsin. The lakes are the lower end of a complex chain of lakes in Oneida and Vilas Counties, Wis. There is concern that increased stormwater runoff from rapidly growing residential/commercial developments and impervious surfaces from the urbanized areas of the Town of Minocqua and Woodruff, as well as increased effluent from septic systems around their heavily developed shoreline has increased nutrient loading to the lakes. Maintaining the quality of the lakes to sustain the tourist-based economy of the towns and the area was a concern raised by the Minocqua/Kawaguesaga Lakes Protection Association. Following several small studies, a detailed study during 2006 and 2007 was done by the U.S. Geological Survey, in cooperation with the Minocqua/Kawaguesaga Lakes Protection Association through the Town of Minocqua to describe the hydrology and water quality of the lakes, quantify the sources of phosphorus including those associated with urban development and to better understand the present and future effects of phosphorus loading on the water quality of the lakes. The water quality of Minocqua and Kawaguesaga Lakes appears to have improved since 1963, when a new sewage-treatment plant was constructed and its discharge was bypassed around the lakes, resulting in a decrease in phosphorus loading to the lakes. Since the mid-1980s, the water quality of the lakes has changed little in response to fluctuations in phosphorus loading from the watershed. From 1986 to 2009, summer average concentrations of near-surface total phosphorus in the main East Basin of Minocqua Lake fluctuated from 0.009 mg/L to 0.027 mg/L but generally remained less than 0.022 mg/L, indicating that the lake is mesotrophic. Phosphorus concentrations from 1988 through 1996, however, were lower than the long-term average, possibly the result of an extended drought in the area. Water‑quality data for Kawaguesaga Lake had a similar pattern to that of Minocqua Lake. Summer average chlorophyll a concentrations and Secchi depths also indicate that the lakes generally are mesotrophic but occasionally borderline eutrophic, with no long-term trends. During the study, major water and phosphorus sources were measured directly, and minor sources were estimated to construct detailed water and phosphorus budgets for the lakes for monitoring years (MY) 2006 and 2007. During these years, the Minocqua Thoroughfare contributed about 38 percent of the total inflow to the lakes, and Tomahawk Thoroughfare contributed 34 percent; near-lake inflow, precipitation, and groundwater contributed about 1, 16, and 11 percent of the total inflow, respectively. Water leaves the lakes primarily through the Tomahawk River outlet (83 percent) or by evaporation (14 percent), with minor outflow to groundwater. Total input of phosphorus to both lakes was about 3,440 pounds in MY 2006 and 2,200 pounds in MY 2007. The largest sources of phosphorus entering the lakes were the Minocqua and Tomahawk Thoroughfares, which delivered about 39 and 26 percent of the total, respectively. The near-lake drainage area, containing most of the urban and residential developments, disproportionately accounted for about 12 percent of the total phosphorus input but only about 1 percent of the total water input (estimated with WinSLAMM). The next largest contributions were from septic systems and precipitation, each contributing about 10 percent, whereas groundwater delivered about 4 percent of the total phosphorus input. Empirical lake water-quality models within BATHTUB were used to simulate the response of Minocqua and Kawaguesaga Lakes to 19 phosphorus-loading scenarios. These scenarios included the current base years (2006–07) for which lake water quality and loading were known, nine general increases or decreases in phosphorus loading from controllable external sources (inputs from the tributaries and nearshore areas around the lakes and input from septic systems), and nine scenarios corresponding to future changes in phosphorus loading from residential and urban development, referred to as “2030 buildout,” and removal of septic system inputs. The 2030 buildout scenario with existing stormwater controls resulted in a degradation in water quality: phosphorus concentrations increased by about 0.001 mg/L, chlorophyll a concentrations increased by 0.2–0.8 μg/L, and Secchi depths decreased slightly. The largest degradation in water quality was estimated to occur in Kawaguesaga Lake. If 2030 buildout occurred with implementation of best management practices to achieve a 50-percent reduction in loading from near-lake drainages, it is possible that water quality would change very little from existing conditions. Numerous noncontributing areas exist within the watershed that help minimize surface runoff and nutrient loading to the lakes; however, if future development included extending or connecting drainage from these areas into the lakes, loading to the lakes could greatly increase and cause a degradation in the water quality of the lakes. Simulations of removal of phosphorus loading from septic systems around Minocqua Lake improved the water quality of the lakes: in simulations for that scenario, phosphorus concentrations decreased by about 0.001 mg/L, chlorophyll a concentrations decreased by 0.5–0.7 μg/L, and Secchi depths increased by 0.3–0.7 ft. If all controllable external phosphorus loading could be reduced by 50 percent, the lakes would become oligotrophic with respect to phosphorus concentration but would still remain mesotrophic with respect to chlorophyll a concentration and Secchi depth. Improvements in the water quality of the lakes are likely only with a combination of management actions that decrease inputs from the developed near-lake drainage areas and from septic systems.

Wisconsin↗

USGS2012

Water quality, hydrology, and simulated response to changes in phosphorus loading of Mercer Lake, Iron County, Wisconsin, with special emphasis on the effects of wastewater discharges

Mercer Lake is a relatively shallow drainage lake in north-central Wisconsin. The area near the lake has gone through many changes over the past century, including urbanization and industrial development. To try to improve the water quality of the lake, actions have been taken, such as removal of the lumber mill and diversion of all effluent from the sewage treatment plant away from the lake; however, it is uncertain how these actions have affected water quality. Mercer Lake area residents and authorities would like to continue to try to improve the water quality of the lake; however, they would like to place their efforts in the actions that will have the most beneficial effects. To provide a better understanding of the factors affecting the water quality of Mercer Lake, a detailed study of the lake and its watershed was conducted by the U.S. Geological Survey in collaboration with the Mercer Lake Association. The purposes of the study were to describe the water quality of the lake and the composition of its sediments; quantify the sources of water and phosphorus loading to the lake, including sources associated with wastewater discharges; and evaluate the effects of past and future changes in phosphorus inputs on the water quality of the lake using eutrophication models (models that simulate changes in phosphorus and algae concentrations and water clarity in the lake). Based on analyses of sediment cores and monitoring data collected from the lake, the water quality of Mercer Lake appears to have degraded as a result of the activities in its watershed over the past 100 years. The water quality appears to have improved, however, since a sewage treatment plant was constructed in 1965 and its effluent was routed away from the lake in 1995. Since 2000, when a more consistent monitoring program began, the water quality of the lake appears to have changed very little. During the two monitoring years (MY) 2008-09, the average summer near-surface concentration of total phosphorus was 0.023 mg/L, indicating the lake is borderline mesotrophic-eutrophic, or has moderate to high concentrations of phosphorus, whereas the average summer chlorophyll a concentration was 3.3 mg/L and water clarity, as measured with a Secchi depth, was 10.4 ft, both indicating mesotrophic conditions or that the lake has a moderate amount of algae and water clarity. Although actions have been taken to eliminate the wastewater discharges, the bottom sediment still has slightly elevated concentrations of several pollutants from wastewater discharges, lumber operations, and roadway drainage, and a few naturally occurring metals (such as iron). None of the concentrations, however, were high enough above the defined thresholds to be of concern. Based on nitrogen to phosphorus ratios, the productivity (algal growth) in Mercer Lake should typically be limited by phosphorus; therefore, understanding the phosphorus input to the lake is important when management efforts to improve or prevent degradation of the lake water quality are considered. Total inputs of phosphorus to Mercer Lake were directly estimated for MY 2008-09 at about 340 lb/yr and for a recent year with more typical hydrology at about 475 lb/yr. During these years, the largest sources of phosphorus were from Little Turtle Inlet, which contributed about 45 percent, and the drainage area near the lake containing the adjacent urban and residential developments, which contributed about 24 percent. Prior to 1965, when there was no sewage treatment plant and septic systems and other untreated systems contributed nutrients to the watershed, phosphorus loadings were estimated to be about 71 percent higher than during around 2009. In 1965, a sewage treatment plant was built, but its effluent was released in the downstream end of the lake. Depending on various assumptions on how much effluent was retained in the lake, phosphorus inputs from wastewater may have ranged from 0 to 342 lb. Future highway and stormwater improvements have been identified in the Mercer Infrastructure Improvement Project, and if they are done with the proposed best management practices, then phosphorus inputs to the lake may decrease by about 40 lb. Eutrophication models [Canfield and Bachman model (1981) and Carlson Trophic State Index equations (1977)] were used to predict how the water quality of Mercer Lake should respond to changes in phosphorus loading. A relatively linear response was found between phosphorus loading and phosphorus and chlorophyll a concentrations in the lake, with changes in phosphorus concentrations being slightly less (about 80 percent) and changes in chlorophyll a concentrations being slightly more (about 120 percent) than the changes in phosphorus loadings to the lake. Water clarity, indicated by Secchi depths, responded more to decreases in phosphorus loading than to increases in loading. Results from the eutrophication models indicated that the lake should have been negatively affected by the wastewater discharges. Prior to 1965, when there was no sewage treatment plant effluent and inputs from the septic systems and other untreated systems were thought to be high, the lake should have been eutrophic; near the surface, average phosphorus concentrations were almost 0.035 mg/L, chlorophyll a concentrations were about 7 μg/L, and Secchi depths were about 6 ft, which agreed with the shallower Secchi depths during this time estimated from the sediment-core analysis. The models indicated that between 1965 and 1995, when the lake retained some of the effluent from the new sewage treatment plant, water quality should have been between the conditions estimated prior to 1965 and what was expected during typical hydrologic conditions around MY 2008-09. The models also indicated that if the future Mercer Infrastructure Improvement Project is conducted with the best management practices as proposed, the water quality in the lake could improve slightly from that measured during 2006-10. Because of the small amount of phosphorus that is presently input into Mercer Lake any additional phosphorus added to the lake could degrade water quality; therefore, management actions can usefully focus on minimizing future phosphorus inputs. Phosphorus released from the sediments of a degraded lake often delays its response to decreases in external phosphorus loading, especially in shallow, frequently mixed systems. Mercer Lake, however, remains stratified throughout most of the summer, and phosphorus released from the sediments represents only about 6 percent, or a small fraction, of the total phosphorus load to the lake. Therefore, the phosphorus trapped in the sediments should minimally affect the long-term water quality of the lake and should not delay the response in its productivity to future changes in nutrient loading from its watershed.

Wisconsin↗

USGS2016

Forecasting tidal marsh elevation and habitat change through fusion of Earth observations and a process model

Reducing uncertainty in data inputs at relevant spatial scales can improve tidal marsh forecasting models, and their usefulness in coastal climate change adaptation decisions. The Marsh Equilibrium Model (MEM), a one-dimensional mechanistic elevation model, incorporates feedbacks of organic and inorganic inputs to project elevations under sea-level rise scenarios. We tested the feasibility of deriving two key MEM inputs—average annual suspended sediment concentration (SSC) and aboveground peak biomass—from remote sensing data in order to apply MEM across a broader geographic region. We analyzed the precision and representativeness (spatial distribution) of these remote sensing inputs to improve understanding of our study region, a brackish tidal marsh in San Francisco Bay, and to test the applicable spatial extent for coastal modeling. We compared biomass and SSC models derived from Landsat 8, DigitalGlobe WorldView-2, and hyperspectral airborne imagery. Landsat 8-derived inputs were evaluated in a MEM sensitivity analysis. Biomass models were comparable although peak biomass from Landsat 8 best matched field-measured values. The Portable Remote Imaging Spectrometer SSC model was most accurate, although a Landsat 8 time series provided annual average SSC estimates. Landsat 8-measured peak biomass values were randomly distributed, and annual average SSC (30 mg/L) was well represented in the main channels (IQR: 29–32 mg/L), illustrating the suitability of these inputs across the model domain. Trend response surface analysis identified significant diversion between field and remote sensing-based model runs at 60 yr due to model sensitivity at the marsh edge (80–140 cm NAVD88), although at 100 yr, elevation forecasts differed less than 10 cm across 97% of the marsh surface (150–200 cm NAVD88). Results demonstrate the utility of Landsat 8 for landscape-scale tidal marsh elevation projections due to its comparable performance with the other sensors, temporal frequency, and cost. Integration of remote sensing data with MEM should advance regional projections of marsh vegetation change by better parameterizing MEM inputs spatially. Improving information for coastal modeling will support planning for ecosystem services, including habitat, carbon storage, and flood protection.

California↗

USGS2010

Mg isotope constraints on soil pore-fluid chemistry: Evidence from Santa Cruz, California

Mg isotope ratios ( 26 Mg/ 24 Mg) are reported in soil pore-fluids, rain and seawater, grass and smectite from a 90 kyr old soil, developed on an uplifted marine terrace from Santa Cruz, California. Rain water has an invariant 26 Mg/ 24 Mg ratio (expressed as δ26 Mg> δ26 Mg ) at −0.79 ± 0.05‰, identical to seawater δ26 Mg> δ26 Mg . Detrital smectite (from the base of the soil profile, and therefore unweathered) has a δ26Mg"> δ26Mg value of 0.11‰, potentially enriched in 26 Mg by up to 0.3‰ compared to the bulk silicate Earth Mg isotope composition (although within the range of all terrestrial silicates). The soil pore-waters show a continuous profile with depth for δ26 Mg> δ26 Mg , ranging from −0.99‰ near the surface to −0.43‰ at the base of the profile. Shallow pore-waters (<1 m) have δ26 Mg> δ26 Mg values that are similar to, or slightly lower than the rain waters. This implies that the degree of biological cycling of Mg in the pore-waters is relatively small and is quantified as <32%, calculated using the average Mg isotope enrichment factor between grass and rain ( δ26 Mggrass- δ26 Mgrain> δ26 Mggrass- δ26 Mgrain ) of 0.21‰. The deep pore-waters (1–15 m deep) have δ26 Mg> δ26 Mg values that are intermediate between the smectite and rain, ranging from −0.76‰ to −0.43‰, and show a similar trend with depth compared to Sr isotope ratios. The similarity between Sr and Mg isotope ratios confirms that the Mg in the pore-waters can be explained by a mixture between rain and smectite derived Mg, despite the fact that Mg and Sr concentrations may be buffered by the exchangeable reservoir. However, whilst Sr isotope ratios in the pore-waters span almost the complete range between mineral and rain inputs, Mg isotopes compositions are much closer to the rain inputs. If Mg and Sr isotope ratios are controlled uniquely by a mixture, the data can be used to estimate the mineral weathering inputs to the pore-waters, by correcting for the rain inputs. This isotopic correction is compared to the commonly used chloride correction for precipitation inputs. A consistent interpretation is only possible if Mg isotope ratios are fractionated either by the precipitation of a secondary Mg bearing phase, not detected by conventional methods, or selective leaching of 24 Mg from smectite. There is therefore dual control on the Mg isotopic composition of the pore-waters, mixing of two inputs with distinct isotopic compositions, modified by fractionation. The data provide (1) further evidence for Mg isotope fractionation at the surface of the Earth and (2) the first field evidence of Mg isotope fractionation during uptake by natural plants. The coherent behaviour of Mg isotope ratios in soil environments is encouraging for the development of Mg isotope ratios as a quantitative tracer of both weathering inputs of Mg to waters, and the physicochemical processes that cycle Mg, a major cation linked to the carbon cycle, during continental weathering.

California↗

USGS1996

Weathering rates as a function of flow through an alpine soil

The effect of flow on release rates of solutes from soil in a 39-m2 alpine catchment in the Colorado Rockies was measured during the summers of 1990-1994. Flow rates through the soil were varied by augmenting natural rainfall with deionized irrigation water. Daily water inputs averaged between 96 and 216 1 day-1 during the five field seasons, and mean discharge (inputs minus evapotranspiration) varied from 35 to 175 1 day-1. Volume-weighted mean concentrations of base cations and silica decreased only moderately in response to the increased water inputs. Input fluxes of solutes in precipitation were similar in each of the study seasons, but output fluxes of base cations and silica in surface outflow increased substantially in conjunction with the average water input rate for the season. Weathering rates calculated from the chemical fluxes increased substantially in response to increases in water input rates. The increases appear to be largely attributable to enhanced transport of solutes from the soil matrix under high flow conditions. At high flow, physical flushing of micropores presumably occurs to a greater extent than during low-flow periods because of greater soil wetness and higher hydrologic head. Increased flushing would also cause an increased rate of diffusion of solutes from microcracks in mineral surfaces and constricted pore spaces in response to an increased concentration gradient between those regions and adjacent areas in the soil matrix. Another consequence of the increased flushing that occurs during periods of high flow is that concentrations throughout the soil matrix tend to be lower, which might increase chemical weathering rates of some silicate minerals such as microcline, which are relatively close to saturation. Decreased Si concentrations under high-flow conditions appear to promote dissolution of amorphous aluminosilicates or desorption of Si from mineral surfaces, buffering Si concentrations in the soil solutions. Thus, both physical transport of solutes and subsequent chemical effects appear to be responsible for the positive relation observed between fluxes of weathering products and water input rates.

Chemical Geology↗

USGS2001

Effect of canopy removal on snowpack quantity and quality, fraser experimental forest, Colorado

Snowpack peak water equivalent (PWE), ion concentration, content, and spatial distribution of ion load data from spring 1987-1996 in a 1 ha clearcut and adjacent forested plots vegetated by mature Picea engelmannii and Abies lasiocarpa in the Fraser experimental forest (FEF), Colorado are presented. Our objectives were: (1) to see if a forest opening might redistribute snowfall, snowpack moisture, and snowpack chemical content, and (2) to examine the importance of canopy interception on snowpack quantity and chemistry. On an average, the canopy intercepted 36% of snowfall. Interception was correlated with snowfall amount, snowpack PWE beneath the canopy, and air temperature. Canopy removal increased snowpack PWE to >90% cumulative snowfall inputs. Snowpack K-, H-, and NH4+ concentrations on the clearcut were lower and NO3- higher than in the snowpack beneath the forested plots. Cu mulative snowfall K+ input was less than in the clearcut snowpack; H+ inputs were greater in snowfall than in the snowpack of any plot; and inorganic N (NO3- and NH4+) inputs from snowfall to the clearcut were greater than to the forested plots. Processes accounting for the differences between snowfall inputs and snowpack ion content were leaching of organic debris in the snowpack, differential elution of the snowpack, and canopy retention. There were significant trends by year in snowpack ion content at PWE without similar trends in snowfall inputs. This finding coupled with snowpack ion elution bring into question the use of snowpack chemistry as an indicator of winter atmospheric inputs in short-term studies. ?? 2001 Elsevier Science B.V.

Journal of Hydrology↗

USGS2009

Quantifying the spatial details of carbon sequestration potential and performance

Upscaling the spatial and temporal changes of carbon stocks and fluxes from sites to regions is challenging owing to the spatial and temporal variances and covariance of driving variables and the uncertainties in both the model and the input data. Although various modeling approaches have been developed to facilitate the upscaling process, few deal with error transfer from model input to output, and error propagation in time and space. The author has developed the General Ensemble Biogeochemical Modelling System (GEMS) for upscaling carbon stocks and fluxes from sites to regions with measures of uncertainty. This chapter describes the GEMS model, its application to regional- and larger-scale areas, and the new results that demonstrate the challenges of upscaling. GEMS relies on site-scale biogeochemical models to simulate carbon dynamics at the site scale. The spatial deployment of the site-scale model in GEMS is based on the spatial and temporal joint frequency distribution of major driving variables (e.g., land cover and land use change, climate, soils, disturbances, and management). At the site scale, GEMS uses stochastic ensemble simulations to incorporate input uncertainty to quantify uncertainty transfer from input to output, and to identify trends in both input data and simulation results. It permits one to simulate the range of possible permutations of input values and identify the trends and variance in both the input data and results. Using data assimilation techniques, GEMS simulations can be constrained by field and satellite observations, including estimates of net primary production (NPP) from the Moderate Resolution Imaging Spectroradiometer (MODIS), grain yield and cropping practices, and forest inventories. The modeling philosophy embedded in GEMS makes it ideal for assimilating information with various uncertainties to support estimating the spatial details of carbon sequestration potential as well as dynamic monitoring of the performance of carbon sequestration activities over large areas. As a case study, GEMS is applied to simulate the spatial and temporal details of carbon sources, sinks, and uncertainty in the Ridge and Valley ecoregion in the eastern United States

Book chapter↗

USGS1993

Analysis of summer phosphorus fluxes within the pelagic zone of Eau Galle Reservoir, Wisconsin

Major phosphorus (P) fluxes to and from the pelagic zone (i.e., open water region including epilimnion, metalimnion, and hypolimnion) were estimated from data collected over a 6 year period during the summer in Eau Galle Reservoir, Wisconsin. P inputs to the pelagic zone included profundal sediments, the watershed, groundwater, and transport of P from the littoral zone. P outputs from the pelagic zone included discharge from the reservoir, deposition, and transport of P to the littoral zone. Nighttime convective circulation was assumed to be the dominant mechanism of P exchange between the littoral and pelagic zones. Littoral P inputs, often neglected from budgetary analyses, accounted for 15% of the total measured P input and 25% of the internal P input to the pelagic zone. External P inputs were greatest, accounting for 42% of the total measured P input to the pelagic zone. These results emphasize the need for control of various sources of P inputs in the development of lake and reservoir management strategies.

Lake and Reservoir Management↗

USGS1999

Seasonal relationships between precipitation, forest floor, and streamwater nitrogen, Isle Royale, Michigan

The Upper Great Lakes receive large amounts of precipitation-NH + 4 and moderate NO - 3 inputs. Increased atmospheric inorganic N input has led to concern about ecosystem capacity to utilize excess N. This paper summarizes a 5-yr study of seasonal N content and flux in precipitation, snowpack, forest floor, and streamwater in order to assess the source of inorganic N outputs in streamflow from a small boreal watershed. Average precipitation N input was 3 kg ha -1 yr -1 . The peak snowpack N content averaged 0.55 kg ha -1 . The forest floor inorganic N pool was ≈ 2 kg ha -1 , eight times larger than monthly precipitation N input. The inorganic N pool size peaked in spring and early summer. Ninety percent of the forest floor inorganic N pool was made up of NH + 4 -N. Forest floor inorganic N pools generally increased with temperature. Net N mineralization was 15 kg ha -1 yr -1 , and monthly rates peaked in early summer. During winter, the mean monthly net N mineralization rate was twice the peak snowpack N content. Streamwater NO - 3 concentration peaked in winter, and inorganic N output peaked in late fall. Beneath the dominant boreal forest species, net N mineralization rates were positively correlated ( P < 0.05) with streamwater NO - 3 concentrations. Forest floor NO - 3 pools beneath alder [ Alnus rugosa (Du Roi) Spreng] were positively correlated ( P < 0.01) to streamwater NO - 3 output. At the watershed mouth, streamwater NO - 3 concentrations were positively correlated ( P < 0.05) with precipitation NO - 3 input and precipitation amount. The relatively small snowpack N content and seasonal precipitation N input compared to forest floor inorganic N pools and net N mineralization rates, the strong ecosystem retention of precipitation N inputs, and the seasonal streamwater NO - 3 concentration and output pattern all indicated that little streamwater NO - 3 came directly from precipitation or snowmelt.

Michigan↗

USGS2013

Hydrology and water quality of Shell Lake, Washburn County, Wisconsin, with special emphasis on the effects of diversion and changes in water level on the water quality of a shallow terminal lake

Shell Lake is a relatively shallow terminal lake (tributaries but no outlets) in northwestern Wisconsin that has experienced approximately 10 feet (ft) of water-level fluctuation over more than 70 years of record and extensive flooding of nearshore areas starting in the early 2000s. The City of Shell Lake (City) received a permit from the Wisconsin Department of Natural Resources in 2002 to divert water from the lake to a nearby river in order to lower water levels and reduce flooding. Previous studies suggested that water-level fluctuations were driven by long-term cycles in precipitation, evaporation, and runoff, although questions about the lake’s connection with the groundwater system remained. The permit required that the City evaluate assumptions about lake/groundwater interactions made in previous studies and evaluate the effects of the water diversion on water levels in Shell Lake and other nearby lakes. Therefore, a cooperative study between the City and U.S. Geological Survey (USGS) was initiated to improve the understanding of the hydrogeology of the area and evaluate potential effects of the diversion on water levels in Shell Lake, the surrounding groundwater system, and nearby lakes. Concerns over deteriorating water quality in the lake, possibly associated with changes in water level, prompted an additional cooperative project between the City and the USGS to evaluate efeffects of changes in nutrient loading associated with changes in water levels on the water quality of Shell Lake. Numerical models were used to evaluate how the hydrology and water quality responded to diversion of water from the lake and historical changes in the watershed. The groundwater-flow model MODFLOW was used to simulate groundwater movement in the area around Shell Lake, including groundwater/surface-water interactions. Simulated results from the MODFLOW model indicate that groundwater flows generally northward in the area around Shell Lake, with flow locally converging toward the lake. Total groundwater inflow to Shell Lake is small (approximately 5 percent of the water budget) compared with water entering the lake from precipitation (83 percent) and surface-water runoff (13 percent). The MODFLOW model also was used to simulate average annual hydrologic conditions from 1949 to 2009, including effects of the removal of 3 billion gallons of water during 2003–5. The maximum decline in simulated average annual water levels for Shell Lake due to the diversion alone was 3.3 ft at the end of the diversion process in 2005. Model simulations also indicate that although water level continued to decline through 2009 in response to local weather patterns (local drought), the effects of the diversion decreased after the diversion ceased; that is, after 4 years of recovery (2006–9), drawdown attributable to the diversion alone decreased by about 0.6 ft because of increased groundwater inflow and decreased lake-water outflow to groundwater caused by the artificially lower lake level. A delayed response in drawdown of less than 0.5 ft was transmitted through the groundwater-flow system to upgradient lakes. This relatively small effect on upgradient lakes is attributed in part to extensive layers of shallow clay that limit lake/groundwater interaction in the area. Data collected in the lake indicated that Shell Lake is polymictic (characterized by frequent deep mixing) and that its productivity is limited by the amount of phosphorus in the lake. The lake was typically classified as oligotrophic-mesotrophic in June, mesotrophic in July, and mesotrophic-eutrophic in August. In polymictic lakes like Shell Lake, phosphorus released from the sediments is not trapped near the bottom of the lake but is intermittently released to the shallow water, resulting in deteriorating water quality as summer progresses. Because the productivity of Shell Lake is limited by phosphorus, the sources of phosphorus to the lake were quantified, and the response in water quality to changes in phosphorus inputs were evaluated by means of eutrophication models. During 2009, the total input of phosphorus to Shell Lake was 1,730 pounds (lb), of which 1,320 lb came from external sources (76 percent) and 414 lb came from internal loading from sediments in the lake (24 percent). The largest external source was from surface-water runoff, which delivered about 52 percent of the total phosphorus load compared with about 13 percent of the water input. The second largest source was from precipitation (wetfall and dryfall), which delivered 19 percent of the load compared to about 83 percent of the water input. Contributions from septic systems and groundwater accounted for about 3 and 2 percent, respectively. Increased runoff raises water levels in the lake but does not necessarily increase phosphorus loading because phosphorus concentrations in the tributaries decline during increased flow, possibly because of shorter retention times in upstream wetlands. Phosphorus loading to the lake in 2009 represented what occurred after a series of dry years; therefore, this information was combined with data from 2011, a wet year, to estimate phosphorus loading during a range of hydrologic conditions by estimating loading from each component of the phosphorus budget for each year from 1949 to 2011. Comparisons of historical water-quality records with historical water levels and applications of a hydrodynamic model (Dynamic Lake Model, DLM) and empirical eutrophication models were used to understand how changes in water level and the coinciding changes in phosphorus loading affect the water quality of Shell Lake. DLM simulations indicate that large changes in water level (approximately 10 ft) affect the persistence of stratification in the lake. During periods with low water levels, the lake is a well-mixed, polymictic system, with water quality degrading slightly as summer progresses. During periods with high water levels, the lake is more stratified, and phosphorus from internal loading is trapped in the hypolimnion and released later in summer, which results in more extreme seasonality in water quality and better clarity in early summer. Results of eutrophication model simulations using a range in external phosphorus inputs illustrate how water quality in Shell Lake (phosphorus and chlorophyll a concentrations and Secchi depths) responds to changes in external phosphorus loading. Results indicate that a 50-percent reduction in external loading from that measured in 2009 would be required to change phosphorus concentrations from 0.018 milligram per liter (mg/L) (measured in 2009) to 0.012 mg/L (estimated for the mid-1800s from analysis of diatoms in sediment cores). Such reductions in phosphorus loading cannot be accomplished by targeting septic systems or internal loading alone because septic systems contribute only about 3 percent of the phosphorus input to the lake, and internal loading from the sediments of Shell Lake contributes only about 25 percent of phosphorus input. Complete elimination of phosphorus from septic systems and internal loading would decrease the phosphorus concentrations in the lake by 0.003–0.004 mg/L. Therefore, reducing phosphorus concentration in the lake more than by 0.004 mg/L requires decreasing phosphorus loading from surface-water contributions, primarily runoff to the lake. Reconstructed changes in water quality from 1860 to 2010, based on changes in the diatom communities archived in the sediments and eutrophication model simulations, suggest that anthropogenic changes in the watershed (sawmill construction in 1881; the establishment of the village of Shell Lake; and land-use changes in the 1920s, including increased agriculture) had a much larger effect on water quality than the natural changes associated with fluctuations in water level. Although the effects of natural changes in water level on water quality appear to be small, changes in water level do have a modest effect on water quality, primarily manifested as small improvements during higher water levels. Fluctuations in water level, however, have a larger effect on the seasonality of water-quality patterns, with better water quality, especially increased Secchi depths, in early summer during years with high water levels.

Wisconsin↗

USGS2016

Water quality and hydrology of Silver Lake, Oceana County, Michigan, with emphasis on lake response to nutrient loading

Executive Summary Silver Lake is a 672-acre inland lake located in Oceana County, Michigan, and is a major tourist destination due to its proximity to Lake Michigan and the surrounding outdoor recreational opportunities. In recent years, Silver Lake exhibited patterns of high phosphorus concentrations, elevated chlorophyll a concentrations, and nuisance algal blooms. The U.S. Geological Survey (USGS), in cooperation with the Silver Lake Improvement Board and in collaboration with the Annis Water Resources Institute (AWRI) of Grand Valley State University, designed a study to assess the hydrologic and nutrient inputs to Silver Lake in order to identify the events and conditions that affect the nutrient chemistry and production of algal blooms in the lake. This information can inform water-resource managers in developing various management strategies to prevent or reduce the occurrence of future algal blooms. USGS and AWRI scientists collected data from November 2012 to December 2014 to provide information for future management decisions for Silver Lake. Silver Lake can be classified as a polymictic lake and has a residence time of approximately 223 days. Based on the mean lake Secchi depth, total phosphorus, and total nitrogen concentrations, Silver Lake is classified as a eutrophic lake. In-situ bioassay results indicate that algal growth in Silver Lake is colimited by both nitrogen and phosphorus. The nutrient budget for Silver Lake was calculated using the BATHTUB model based on 2 years of water-quality data collection. The BATHTUB model, developed by the U.S. Army Corps of Engineers, treats the lake as a well-mixed system with multiple inputs and outlets for both water and dissolved constituents, such as nutrients. Based on results of the BATHTUB model, which were conditioned on observed concentrations and flows, the mean annual input of phosphorus to Silver Lake was approximately 1,342 pounds (lb); the mean annual input of nitrogen to Silver Lake was approximately 51,998 lb. The major measured sources of phosphorus loading to Silver Lake were groundwater and Hunter Creek, whereas the major measured sources of nitrogen to Silver Lake were Hunter Creek, groundwater, and atmospheric deposition. The largest loading of phosphorus and nitrogen to Silver Lake occurred during the spring. Minimal phosphorus deposition (if any) occurred in the lakebed sediment; however, of the nitrogen that entered Silver Lake, approximately 42.2 percent was deposited in the lakebed sediment as simulated by the BATHTUB model. In addition to measured sources, a septic load model was used to estimate the likely range of septic contribution to groundwater and adjacent surface waters. The likely septic loading scenario estimates that septic systems contribute 47.8 percent of the phosphorus to groundwater and 22.3 percent of phosphorus to Hunter Creek. These results indicate that septic systems are a major source of phosphorus loading to Silver Lake. The likely septic loading scenario indicated that septic systems account for 0.95 percent of the nitrogen load to Hunter Creek and 1.1 percent of the contribution of nitrogen to groundwater. The BATHTUB model was used to estimate future nutrient loading and eutrophication scenarios based on water-quality data collected from Silver Lake, groundwater, major tributaries, and atmospheric deposition. A separate septic load model was used to estimate the septic contribution to groundwater or directly to surface water, and the nutrient load estimates were modeled using the BATHTUB model to determine subsequent water-quality changes to Silver Lake. BATHTUB model scenarios based on measured data: The first BATHTUB scenario evaluated the condition of Silver Lake and the change to lake water quality (trophic status) as a result of changes in nutrient loading from different sources. Based on BATHTUB model simulations, if groundwater loading of phosphorus and nitrogen only were decreased by 75 percent, and all of the other nutrient inputs stayed the same, the future condition of Silver Lake would most likely remain highly mesotrophic to eutrophic (the current [2014] condition of Silver Lake). If nutrient loading continued to increase in groundwater, the lake would continue to remain eutrophic with more frequent algal blooms. If nutrient loading from Hunter Creek only decreased by 50–75 percent, and all of the other nutrient inputs stayed the same as the baseline dataset, Silver Lake would remain eutrophic to highly mesotrophic. By reducing the input of manageable nutrient sources (Hunter Creek, groundwater, and lawn runoff) by 75 percent, the BATHTUB model simulation indicates that Silver Lake would be classified as mesotrophic, which is indicative of improved water quality, water clarity, and reduced algal bloom frequency. Simulations also were run using the BATHTUB model to evaluate the number of days Silver Lake could experience algal blooms (algal blooms are defined as modeled chlorophyll a in excess of 10 micrograms per liter [µg/L]) as a result of an increase/decrease in phosphorus and nitrogen loading from groundwater, Hunter Creek, and (or) a combination of sources. If the phosphorus and nitrogen loading from Hunter Creek is decreased (and all other sources are not altered), Silver Lake will continue to experience algal blooms, but less frequently than what is currently experienced. The same scenario holds true if the nutrient loading from groundwater is decreased. Another scenario was simulated using a combination of sources, which includes increases and decreases in phosphorus and nitrogen loading from sources that are the most likely to be managed, and includes groundwater (as a result of conversion of household septic to sewers), Hunter Creek (conversion of household septic to sewers), and lawn runoff. Results of the BATHTUB model indicated that a 50-percent reduction of phosphorus and nitrogen from these sources would result in a considerable decrease in algal bloom frequency (from 231 to 132 days) and severity, and a 75-percent reduction would greatly reduce algal bloom occurrence on Silver Lake (from 231 to 57 days). BATHTUB model scenarios based on septic load model: A scenario also was conducted using the BATHTUB model to simulate the conversion of septic to sewer and included a low, high, and medium (likely) scenario of nutrient loading to Silver Lake. Simulations of the BATHTUB model indicated that, under the likely scenario, the conversion of all onsite septic treatment to sewers would result in an overall change in lake trophic status from eutrophic to mesotrophic, thereby reducing the frequency of algal blooms and algal bloom intensity on Silver Lake (chlorophyll a >10 µg/L, from 231 to 184 days per year, or chlorophyll a >20 µg/L, from 80 to 49 days per year).

Michigan↗

USGS2018

Water-quality response to changes in phosphorus loading of the Winnebago Pool Lakes, Wisconsin, with special emphasis on the effects of internal loading in a chain of shallow lakes

The Winnebago Pool is a chain of four shallow lakes (Lake Poygan, Lake Winneconne, Lake Butte des Morts, and Lake Winnebago) that are fed primarily by the Fox and Wolf Rivers, two large agriculturally dominated rivers in Wisconsin, United States. Because the lakes have received extensive phosphorus inputs from their watershed, they have become highly eutrophic with much phosphorus in the water column as well as trapped in their sediments. Each of the four Winnebago Pool lakes has been included on the Wisconsin Department of Natural Resources impaired waters list because of their high total phosphorus concentrations, water-quality use restrictions, and excess algal growth. The study described in this report is part of a Total Maximum Daily Load investigation to determine what actions are needed to improve the water quality (trophic status) of these lakes and thus be able to be removed from the impaired waters list and restore their designated uses. As part of this study, data were collected to describe the existing water quality of the lakes, detailed phosphorus budgets were developed for each of the lakes to describe the different sources of the phosphorus, and two eutrophication models (BATHTUB and Jensen models) were used to determine how much of the phosphorus being input to the lakes needs to be reduced for the lakes to be removed from the impaired waters list and restore their designated uses. In-lake water-quality data indicated that each of the lakes had extensive vertical mixing that resulted in their water quality deteriorating throughout summer. Each of the lakes had mean summer total phosphorus concentrations exceeding 0.088 milligram per liter (mg/L), well above the 0.040 mg/L criterion for the lakes. Detailed phosphorus budgets for the lakes indicated that the primary sources of phosphorus were from their tributaries (for the most upstream lake in the Winnebago Pool–Lake Poygan) or from a combination of input from the upstream lakes and phosphorus release from the bottom sediment when only the summer months were considered (for the other three lakes). Model simulations with the BATHTUB and Jensen models indicated that (1) the lakes should have almost linear response in their total phosphorus concentrations to changes in their phosphorus inputs; (2) phosphorus inputs need to be reduced by about 60 percent to the Upper Pool Lakes and 69–73 percent to Lake Winnebago to reduce their mean summer total phosphorus concentrations to 0.040 mg/L; and (3) if all the anthropogenic phosphorus inputs to the lakes could be eliminated, their best possible mean summer total phosphorus concentrations should decrease to about 0.022–0.028 mg/L in the Upper Pool Lakes and to 0.032–0.033 mg/L in Lake Winnebago. The effects of any reduction in phosphorus loading will take many years (50 to more than 75 years) to be fully realized in lake water quality because of phosphorus release from the lake sediments. The effects of nutrient reductions in the watershed of a chain of lakes, such as the Winnebago Pool, gradually cascades down the chain, which has beneficial and detrimental effects. Any action made in the watershed of upstream lakes to reduce phosphorus inputs should improve the water quality of all downstream lakes; however, the upstream lakes delay the response in the downstream lakes, especially in lakes where internal phosphorus loading is important.

Wisconsin↗

USGS2023

Evaluating drivers of hydrology, water quality, and benthic macroinvertebrates in streams of Fairfax County, Virginia, 2007–18

In 2007, the U.S. Geological Survey partnered with Fairfax County, Virginia, to establish a long-term water-resources monitoring program to evaluate the hydrology, water quality, and ecology of Fairfax County streams and the watershed-scale effects of management practices. Fairfax County uses a variety of management practices, policies, and programs to protect and restore its water resources, but the effects of such strategies are not well understood. This report used streamflow, water-quality, and ecological monitoring data collected from 20 Fairfax County watersheds from 2007 through 2018 to assess the effects of management practices, landscape factors, and climatic conditions on observed nutrient, sediment, salinity, and benthic-macroinvertebrate community responses. Urbanization, climatic variability, and an increase in management practices occurred within Fairfax County during the study period. Impervious cover, housing units, wastewater infrastructure, and (or) stormwater infrastructure increased in most study watersheds. Climatic conditions varied among study years; countywide estimates of average-annual air temperature differed by about 3 degrees Celsius, and total precipitation ranged from about 34 to 63 inches per year. The effects of the management practices, implemented to reduce nitrogen, phosphorus, and (or) sediment loads, are considered in this study. These management practices primarily consist of stormwater retrofits and stream restorations; however, stream restorations account for most of the financial investment and expected load reductions. Management practices were implemented in half of the study watersheds, and most practices were installed and reductions credited late in the study period. Changes in hydrologic response during storm events were evaluated over the study period because many management practices that were implemented were designed to achieve nutrient and sediment reductions by slowing or intercepting runoff. The average number and length of storm events was mostly unchanged throughout the monitoring network. Four watersheds with 10 years of streamflow data showed a mixture of trends in stormflow peak, volume, and rate-of-change. Event-mean nutrient and sediment concentrations from these watersheds were evaluated during storm events and generally showed increases in total phosphorus (TP) and suspended sediment and reductions or no changes in total nitrogen (TN). Landscape inputs of nitrogen and phosphorus and the percentage of inputs delivered to streams were estimated for the study watersheds. Estimated phosphorus from fertilizer and nitrogen from atmospheric deposition represented large nutrient inputs in most watersheds; amounts of other nonpoint sources varied based on land use. Estimated nitrogen inputs declined throughout Fairfax County and in most study watersheds from 2008 through 2018; in comparison, phosphorus input changes were relatively small. Most nonpoint-nutrient inputs were retained on the landscape and did not reach streams, with slightly more nitrogen retention than phosphorus, on average. Retention rates were lower for years with more precipitation and streamflow. After adjusting for streamflow, TN and TP loads were generally higher for years with more nutrient inputs. Calculated as a function of flow-adjusted loads, TP retention declined at most stations from 2009 through 2018, in comparison, TN retention was relatively unchanged. Landscape and climatic conditions affected spatial differences and changes in Fairfax County stream conditions from 2009 through 2018. TN concentrations were higher and increases over time were larger in watersheds with elevated septic-system density. TP concentrations were higher in watersheds with more turfgrass; concentrations were lower, but had larger increases over time, in watersheds with deeper soils. Suspended-sediment concentrations were higher in watersheds with greater stream densities. Specific conductance was higher in watersheds with more developed land use and shallower soils. Benthic-macroinvertebrate index of biotic integrity (IBI) scores were lower in watersheds with high road density and had larger increases over time in bigger, more developed watersheds. Annual variability in TN and TP concentrations and benthic-macroinvertebrate IBI scores was affected by precipitation; annual variability in suspended sediment concentrations and specific conductance was affected by air temperature. After accounting for influences from landscape and climatic conditions, expected management-practice effects were not consistently observed in monitored stream responses. These effects were assessed by comparing expected management-practice load reductions with the timing, direction, and magnitude of changes in storm-event hydrology, nutrient and sediment loads, median-annual water-quality conditions, and benthic-macroinvertebrate IBI scores. An important consideration for future investigations of management-practice effects is how to control for water-quality and ecological variability caused by geologic properties, the urban environment, precipitation, and (or) air temperature. The interpretation of management-practice effects in this report was likely influenced by a combination of factors, including (1) the amount, timing, and location of management-practice implementation; (2) unmeasured landscape and climatic factors; (3) uncertain management-practice expectations; (4) hydrologic variability; and (5) analytical assumptions. Through continued data-collection efforts, particularly after management practices have been completed, many of these factors may become less influential in the future.

Virginia↗

USGS2013

Stochastic empirical loading and dilution model (SELDM) version 1.0.0

The Stochastic Empirical Loading and Dilution Model (SELDM) is designed to transform complex scientific data into meaningful information about the risk of adverse effects of runoff on receiving waters, the potential need for mitigation measures, and the potential effectiveness of such management measures for reducing these risks. The U.S. Geological Survey developed SELDM in cooperation with the Federal Highway Administration to help develop planning-level estimates of event mean concentrations, flows, and loads in stormwater from a site of interest and from an upstream basin. Planning-level estimates are defined as the results of analyses used to evaluate alternative management measures; planning-level estimates are recognized to include substantial uncertainties (commonly orders of magnitude). SELDM uses information about a highway site, the associated receiving-water basin, precipitation events, stormflow, water quality, and the performance of mitigation measures to produce a stochastic population of runoff-quality variables. SELDM provides input statistics for precipitation, prestorm flow, runoff coefficients, and concentrations of selected water-quality constituents from National datasets. Input statistics may be selected on the basis of the latitude, longitude, and physical characteristics of the site of interest and the upstream basin. The user also may derive and input statistics for each variable that are specific to a given site of interest or a given area. SELDM is a stochastic model because it uses Monte Carlo methods to produce the random combinations of input variable values needed to generate the stochastic population of values for each component variable. SELDM calculates the dilution of runoff in the receiving waters and the resulting downstream event mean concentrations and annual average lake concentrations. Results are ranked, and plotting positions are calculated, to indicate the level of risk of adverse effects caused by runoff concentrations, flows, and loads on receiving waters by storm and by year. Unlike deterministic hydrologic models, SELDM is not calibrated by changing values of input variables to match a historical record of values. Instead, input values for SELDM are based on site characteristics and representative statistics for each hydrologic variable. Thus, SELDM is an empirical model based on data and statistics rather than theoretical physiochemical equations. SELDM is a lumped parameter model because the highway site, the upstream basin, and the lake basin each are represented as a single homogeneous unit. Each of these source areas is represented by average basin properties, and results from SELDM are calculated as point estimates for the site of interest. Use of the lumped parameter approach facilitates rapid specification of model parameters to develop planning-level estimates with available data. The approach allows for parsimony in the required inputs to and outputs from the model and flexibility in the use of the model. For example, SELDM can be used to model runoff from various land covers or land uses by using the highway-site definition as long as representative water quality and impervious-fraction data are available.

Techniques and Methods↗

USGS2001

Geohydrology and limnology of Walden Pond, Concord, Massachusetts

The trophic ecology and ground-water contributing area of Walden Pond, in Concord and Lincoln, Mass., were investigated by the U.S. Geological Survey in cooperation with the Massachusetts Department of Environmental Management from April 1997 to July 2000. Bathymetric investigation indicated that Walden Pond (24.88 hectares), a glacial kettle-hole lake with no surface inlet or outlet, has three deep areas. The maximum depth (30.5 meters) essentially was unchanged from measurements made by Henry David Thoreau in 1846. The groundwater contributing area (621,000 square meters) to Walden Pond was determined from water-table contours in areas of stratified glacial deposits and from land-surface contours in areas of bedrock highs. Walden Pond is a flow-through lake: Walden Pond gains water from the aquifer along its eastern perimeter and loses water to the aquifer along its western perimeter. Walden Pond contributing area also includes Goose Pond and its contributing area. A water budget calculated for Walden Pond, expressed as depth of water over the lake surface, indicated that 45 percent of the inflow to the lake was from precipitation (1.215 meters per year) and 55 percent from ground water (1.47 meters per year). The groundwater inflow estimate was based on the average of two different approaches including an isotope mass-balance approach. Evaporation accounted for 26 percent of the outflow from the lake (0.71 meters per year) whereas lake-water seepage to the groundwater system contributed 74 percent of the outflow (1.97 meters per year). The water-residence time of Walden Pond is approximately 5 years. Potential point sources of nutrients to ground water, the Concord municipal landfill and a trailer park, were determined to be outside the Walden Pond groundwater contributing area. A third source, the septic leach field for the Walden Pond State Reservation facilities, was within the groundwater contributing area. Nutrient budgets for the lake indicated that nitrogen inputs (858 kilograms per year) were dominated (30 percent) by plume water from the septic leach field and, possibly, by swimmers (34 percent). Phosphorus inputs (32 kilograms per year) were dominated by atmospheric dry deposition, background ground water, and estimated swimmer inputs. Swimmer inputs may represent more than 50 percent of the phosphorus load during the summer. The septic-system plume did not contribute phosphorus, but increased the nitrogen to phosphorus ratio for inputs from 41 to 59, on an atom-to-atom basis. The ratio of nitrogen to phosphorus in input loads and within the lake indicated algal growth would be strongly phosphorus limited. Nitrogen supply in excess of plant requirements may mitigate against nitrogen fixing organisms including undesirable blooms of cyanobacteria. Based on areal nutrient loading, Walden Pond is a mesotrophic lake. Hypolimnetic oxygen demand of Walden Pond has increased since a profile was measured in 1939. Currently (1999), the entire hypolimnion of Walden Pond becomes devoid of dissolved oxygen before fall turnover in late November; whereas historical data indicated dissolved oxygen likely remained in the hypolimnion during 1939. The complete depletion of dissolved oxygen likely causes release of phosphorus from the sediments. Walden Pond contains a large population of the deep-growing benthic macro alga Nitella, which has been hypothesized to promote water clarity in other clear-water lakes by sequestering nutrients and keeping large areas of the sediment surface oxygenated. Loss of Nitella populations in other lakes has correlated with a decline in water quality. Although the Nitella standing crop is large in Walden Pond, Nitella still appears to be controlled by nutrient availability. Decreasing phosphorus inputs to Walden Pond, by amounts under anthropogenic control would likely contribute to the stability of the Nitella population in the metalimnion, may reverse oxygen depletion in the hypolimnion, and decreas

Water-Resources Investigations Report↗

USGS2017

The relative effectiveness of empirical and physical models for simulating the dense undercurrent of pyroclastic flows under different emplacement conditions

High concentration pyroclastic density currents (PDCs) are hot avalanches of volcanic rock and gas and are among the most destructive volcanic hazards due to their speed and mobility. Mitigating the risk associated with these flows depends upon accurate forecasting of possible impacted areas, often using empirical or physical models. TITAN2D, VolcFlow, LAHARZ, and Δ H/L or energy cone models each employ different rheologies or empirical relationships and therefore differ in appropriateness of application for different types of mass flows and topographic environments. This work seeks to test different statistically- and physically-based models against a range of PDCs of different volumes, emplaced under different conditions, over different topography in order to test the relative effectiveness, operational aspects, and ultimately, the utility of each model for use in hazard assessments. The purpose of this work is not to rank models, but rather to understand the extent to which the different modeling approaches can replicate reality in certain conditions, and to explore the dynamics of PDCs themselves. In this work, these models are used to recreate the inundation areas of the dense-basal undercurrent of all 13 mapped, land-confined, Soufrière Hills Volcano dome-collapse PDCs emplaced from 1996 to 2010 to test the relative effectiveness of different computational models. Best-fit model results and their input parameters are compared with results using observation- and deposit-derived input parameters. Additional comparison is made between best-fit model results and those using empirically-derived input parameters from the FlowDat global database, which represent “forward” modeling simulations as would be completed for hazard assessment purposes. Results indicate that TITAN2D is able to reproduce inundated areas well using flux sources, although velocities are often unrealistically high. VolcFlow is also able to replicate flow runout well, but does not capture the lateral spreading in distal regions of larger-volume flows. Both models are better at reproducing the inundated area of single-pulse, valley-confined, smaller-volume flows than sustained, highly unsteady, larger-volume flows, which are often partially unchannelized. The simple rheological models of TITAN2D and VolcFlow are not able to recreate all features of these more complex flows. LAHARZ is fast to run and can give a rough approximation of inundation, but may not be appropriate for all PDCs and the designation of starting locations is difficult. The Δ H/L cone model is also very quick to run and gives reasonable approximations of runout distance, but does not inherently model flow channelization or directionality and thus unrealistically covers all interfluves. Empirically-based models like LAHARZ and Δ H/L cones can be quick, first-approximations of flow runout, provided a database of similar flows, e.g., FlowDat, is available to properly calculate coefficients or Δ H/L . For hazard assessment purposes, geophysical models like TITAN2D and VolcFlow can be useful for producing both scenario-based or probabilistic hazard maps, but must be run many times with varying input parameters. LAHARZ and Δ H/L cones can be used to produce simple modeling-based hazard maps when run with a variety of input volumes, but do not explicitly consider the probability of occurrence of different volumes. For forward modeling purposes, the ability to derive potential input parameters from global or local databases is crucial, though important input parameters for VolcFlow cannot be empirically estimated. Not only does this work provide a useful comparison of the operational aspects and behavior of various models for hazard assessment, but it also enriches conceptual understanding of the dynamics of the PDCs themselves.

Frontiers in Earth Science↗