Search USGSSearch

SEARCH · Search USGS

Results for “Coastal Sediments”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12Linked to original sources

Using turbidity measurements to estimate total phosphorus and sediment flux in a Great Lakes coastal wetland

Coastal wetlands around the Laurentian Great Lakes in North America have the potential to intercept surface water coming off of the landscape and reduce the amount of nutrients and sediment entering the lakes. However, extensive coastal wetland areas have been isolated behind dikes and thus have limited interaction with nutrient-rich waters that contribute to harmful algal blooms and other water-quality issues. In this study, we developed a method to use high-frequency measurements of discharge and turbidity to estimate sediment and total phosphorus retention in a hydrologically reconnected coastal wetland. We found sediment and total phosphorus retention to be episodic and highly related to fluctuations in water level. Low water levels in Lake Erie in late 2012 resulted in low retention in the wetland, but sediment and total phosphorus retention increased as water levels rose in the first half of 2013. Overall, the reconnected wetland was a sink for both total phosphorus and suspended sediment and locally reduced phosphorus loading rates to Lake Erie. Additional wetland reconnection projects have the potential to further reduce phosphorus and sediment loading rates, which could improve local water quality and ecosystem health.

Ohio

Evaluating spectral ratio methods for characterizing fundamental resonance peaks on flat sediments: An example from the Atlantic Coastal Plain, Eastern United States

Damaging ground motions from the 2011 M w "> M w 5.8 Virginia earthquake were likely increased due to site amplification from the unconsolidated sediments of the Atlantic Coastal Plain (ACP), highlighting the need to understand site response on these widespread strata along the coastal regions of the eastern United States. The horizontal‐to‐vertical spectral ratio (HVSR) method, using either earthquake signals or ambient noise as input, offers an appealing method for measuring site response on laterally extensive sediments, because it requires a single seismometer rather than requiring a nearby bedrock site to compute a horizontal sediment‐to‐bedrock spectral ratio (SBSR). Although previous studies show mixed results when comparing the two methods, the majority of these studies investigated site responses in confined sedimentary basins that can generate substantial 3D effects or have relatively small reflection coefficients at their base. In contrast, the flat‐lying ACP strata and the underlying bedrock reflector should cause 1D resonance effects to dominate site response, with amplification of the fundamental resonance peaks controlled by the strong impedance contrast between the base of the sediments and the underlying bedrock. We compare site‐response estimates on the ACP strata derived using the HVSR and SBSR methods from teleseismic signals recorded by regional arrays and observe a close match in the frequencies of the fundamental resonance peak ( ⁠ f 0 "> f 0 ⁠ ) determined by both methods. We find that correcting the HVSR amplitude using source term information from a bedrock site and multiplying the peak by a factor of 1.2 results in amplitude peaks that, on average, match SBSR results within a factor of 2. We therefore conclude that the HVSR method may successfully estimate regional linear weak‐motion site‐response amplifications from the ACP, or similar geologic environments, when appropriate region‐specific corrections to the amplitude ratios are used.

Atlantic Coastal Plain

Tidal variation in cohesive sediment distribution in an idealized, partially-mixed estuary

Particle settling velocity and erodibility are key factors that govern the transport of sediment through coastal environments including estuaries. These are difficult to parameterize in models that represent mud, whose properties can change in response to many factors, including tidally varying suspended sediment concentration (SSC) and shear stress. Using the COAWST (Coupled Ocean-Atmosphere-Wave-Sediment Transport) model framework, we implemented bed consolidation, sediment-induced stratification, and flocculation formulations within an idealized two-dimensional domain that represented the longitudinal dimension of a micro-tidal, muddy, partially mixed estuary. Within the Estuarine Turbidity Maximum (ETM), SSC and median floc diameter varied by a factor of four over the tidal cycle. Downstream of the ETM, the median floc size and SSC were several times smaller and showed less tidal variation (~20% or less). The suspended floc distributions only reached an equilibrium size as a function of SSC and shear in the ETM at peak tidal flow. In general, flocculation increased particle size, which reduced SSC by half in the ETM through increased settling velocity. Consolidation also limited SSC by reduced resuspension, which then limited floc growth through reduced SSC by half outside of the ETM. Sediment-induced stratification had negligible effects in the parameter space examined. Efforts to lessen the computation cost of the flocculation routine by reducing the number of size classes proved difficult; floc size distribution and SSC were sensitive to specification of size classes by factors of 60% and 300%, respectively.

Virginia

Nomenclature of regional hydrogeologic units of the Southeastern Coastal Plain aquifer system

Clastic sediments of the Southeastern Coastal Plain aquifer system can be divided into four regional aquifers separated by three regional confining units. The four regional aquifers have been named for major rivers that cut across their outcrop areas and expose the aquifer materials. From youngest to oldest, the aquifers are called the Chickasawhay River, Pearl River, Chattahoochee River, and Black Warrior River aquifers, and the regional confining units separating them are given the same name as the aquifer they overlie. Most of the regional hydrogeologic units are subdivided within each of the four States that comprise the study area. Correlation of regional units is good with hydrogeologic units delineated by a similar regional study to the west and southwest. Because of complexity created by a major geologic structure to the northeast of the study area and dramatic facies change from clastic to carbonate strata to the southeast, correlation of regional hydrogeologic units is poor in these directions. (Author 's abstract)

Water-Resources Investigations Report

ENSO and PDO drive shoreline position anomalies in the U.S. Pacific Northwest

Sandy beaches act as buffers against various coastal hazards but are vulnerable to episodic (seasonal) and chronic (interannual) erosion. Understanding the variation of shoreline position, a key metric in coastal morphology, over a spectrum of time scales is therefore crucial in assessing hazard vulnerability. Long-standing research has investigated the role of El Niño-Southern Oscillation (ENSO), the dominant mode of climate variability in the Pacific Basin, in seasonal shoreline variability. Yet, ENSO’s chronic influence—and that of another Pacific climate mode, the Pacific Decadal Oscillation (PDO)—on shoreline anomalies remains poorly understood. Here, we examine the variability of sandy beaches in the US Pacific Northwest, a ∼750 km long coastal region on the US West Coast. We leverage 40 years (1984–2024) of shoreline data from publicly available Earth-observing (Landsat) satellite imagery at a high spatial resolution (>10,000 shore-normal transects at 50-m alongshore spacing) and employ Convergent Cross Mapping (CCM), a methodology for inferring causality in dynamical systems. We discover that strong El Niño years are signified by erosion (75.1% of transects), and strong La Niña years exhibit accretional behavior (73.4% of transects). Furthermore, we establish, for the first time, that both ENSO and PDO exert a statistically significant control on interannual shoreline variability, particularly on the alongshore component (in 95 and 100% of littoral cells, respectively), with water level fluctuations playing a critical role. This effort advances our understanding of the seasonal-to-interannual interactions between Pacific Basin climate variability and the PNW’s coastal morphodynamics, with implications for sediment management and coastal adaptation.

California, Oregon, Washington

A ship's ballasting history as an indicator of foraminiferal invasion potential--An example from Prince William Sound, Alaska, USA

We investigated the potential role of ballast sediment from coastal and transoceanic oil tankers arriving and de-ballasting in Port Valdez as a vector for the introduction of invasive benthic foraminifera in Prince William Sound, Alaska. Forty-one ballast sediment samples were obtained in 1998-1999 from 11 oil tankers that routinely discharged their ballast in Prince William Sound after sailing from other West Coast (Los Angeles/Long Beach Harbor, San Francisco Bay, and Puget Sound) or foreign ports (Japan, Korea, and China) where they originally ballasted. Forty of these samples contained benthic foraminifera, including 27 (66%) with the introduced species Trochammina hadai Uchio from nine (81%) of the ships. In all, 59 species were recovered and foraminiferal abundance peaked at 27,000 specimens per gram dry sediment. Of the 41 samples, three were stained and living benthic foraminifera were recovered in all three of them. The entrained foraminifera reflected the number of times ballasting occurred (single or multiple sources), the location of ballasting (estuarine or offshore), and post-acquisition alteration of the sediment (i.e., growth of gypsum crystals at the possible expense of calcareous tests). In temperate regions, sediment samples resulting from single-source ballasting in estuaries (SSBE), multiple-source ballasting in estuaries (MSBE), single-source ballasting offshore (SSBO), and a combination of SSBO and SSBE or MSBE, typically contained increasingly higher species richness, respectively. The potential for an invasion is dependent on the presence of viable candidates and their survivability, their abundance in the ballasting location, and the number of times ballasting occurs, most of which are evident from the ship’s ballasting history. Trochammina hadai is a good example of a successful invasive in Prince William Sound for the following reasons: 1) the species is abundant enough in West Coast and foreign ports where ballasting occurs that sufficient individuals needed for reproduction may be transported to the receiving waters; 2) Port Valdez, in particular, receives repeated and frequent inoculations from the same source ports where T. hadai is present; 3) large quantities of sediment are taken up by commercial vessels during ballasting and benthic foraminifera occur in abundance in ballast sediment; 4) ballast sediment provides a suitable environment in which benthic foraminifera can survive for extended periods of time during transport; 5) T. hadai flourishes in a wide range of temperatures and environmental conditions that characterize both the ports where ballasting takes place as well as in Port Valdez where de-ballasting occurs; and 6) the species is capable of asexual reproduction and possibly the ability to form a dormant resting stage, both of which have the potential to lower the threshold for colonization. Clearly, ballast sediment is a viable vector for the introduction of T. hadai and other invasives into Alaskan ports and elsewhere worldwide.

Alaska

A 1.2 billion pixel human-labeled dataset for data-driven classification of coastal environments

The world’s coastlines are spatially highly variable, coupled-human-natural systems that comprise a nested hierarchy of component landforms, ecosystems, and human interventions, each interacting over a range of space and time scales. Understanding and predicting coastline dynamics necessitates frequent observation from imaging sensors on remote sensing platforms. Machine Learning models that carry out supervised (i.e., human-guided) pixel-based classification, or image segmentation, have transformative applications in spatio-temporal mapping of dynamic environments, including transient coastal landforms, sediments, habitats, waterbodies, and water flows. However, these models require large and well-documented training and testing datasets consisting of labeled imagery. We describe “Coast Train,” a multi-labeler dataset of orthomosaic and satellite images of coastal environments and corresponding labels. These data include imagery that are diverse in space and time, and contain 1.2 billion labeled pixels, representing over 3.6 million hectares. We use a human-in-the-loop tool especially designed for rapid and reproducible Earth surface image segmentation. Our approach permits image labeling by multiple labelers, in turn enabling quantification of pixel-level agreement over individual and collections of images.

Scientific Data

Sediment characteristics of streams in the eastern Piedmont and western Coastal Plain regions of North Carolina

The sediment-transport characteristics of streams were determined in a 15,500-square-kilometre (6,000-square-mile) area of the Coastal Plain and Piedmont regions of eastern North Carolina during 1969-73. The study covered all or parts of 21 counties and included data for 28 sediment-sampling stations in parts of 4 major river basins?the Roanoke, Pamlico, Neuse, and Cape Fear. Annual suspended-sediment yields ranged from 117 to 4.2 tonnes per square kilometre (333 to 12 tons per square mile). Streams in the Piedmont region have the highest yields. Suspended-sediment yield decreases in an eastward direction from the Piedmont to the Coastal Plain region. Sediment characteristics are directly affected by topography, storm runoff, geology, land use, and man-made detention structures. At one sampling station in the 1973 water year 44 percent of the suspended sediment tonnage was transported during 34 days of high flow. In the Piedmont region, sediment yields vary indirectly with the percentage of forest cover in the basin, but there appears to be no definite relationship between forest cover and sediment yield in the Coastal Plain region. Large lakes act as sediment-detention reservoirs. Average annual sediment yields ranged from 34 to 117 tonnes per square kilometre (98 to 333 tons per square mile) for 3 headwater streams which flow into Hyco Lake in Person County; however, the yield for the station less than 3.2 kilometres (2 miles) downstream from Hyco Dam was about 4.2 tonnes per square kilometre (12 tons per square mile). Most suspended sediment during floods in Piedmont streams ranges in size from sand to silt, whereas the suspended material in flooding streams in the Coastal Plain is generally clay size.

North Carolina

Upper crustal structure of Alabama from regional magnetic and gravity data: Using geology to interpret geophysics, and vice versa

Aeromagnetic and gravity data sets obtained for Alabama (United States) have been digitally merged and filtered to enhance upper-crustal anomalies. Beneath the Appalachian Basin in northwestern Alabama, broad deep-crustal anomalies of the continental interior include the Grenville front and New York–Alabama lineament (dextral fault). Toward the east and south, high-angle discordance between the northeast-trending Appalachians and the east-west–trending wedge of overlapping Mesozoic and Cenozoic Gulf Coastal Plain sediments reveals how bedrock geophysical signatures progressively change with deeper burial. High-frequency magnetic anomalies in the Appalachian deformed domain (ADD) correspond to amphibolites and mylonites outlining terranes, while broader, lower-amplitude domains include Paleozoic intrusive bodies and Grenville basement gneiss. Fundamental ADD structures (e.g., the Alexander City, Towaliga, and Goat Rock–Bartletts Ferry faults) can be traced southward beneath the Gulf Coastal Plain to the suture with Gondwanan crust of the Suwannee terrane. Within the ADD, there is clear magnetic distinction between Laurentian crust and the strongly linear, high-frequency magnetic highs of peri-Gondwanan (Carolina-Uchee) arc terranes. The contact (Central Piedmont suture) corresponds to surface exposures of the Bartletts Ferry fault. ADD magnetic and gravity signatures are truncated by the east-west–trending Altamaha magnetic low associated with the Suwannee suture. Arcuate northeast-trending magnetic linears of the Suwannee terrane reflect internal structure and Mesozoic failed-rift trends. Geophysical data can be used to make inferences on surface and subsurface geology and vice versa, which has applicability anywhere that bedrock is exposed or concealed beneath essentially non-magnetic sedimentary cover.

Alabama

Geochemical variations in a core of hydrogeologic units near Freehold, New Jersey

Solutes were determined for 26 pore-water samples extracted from Tertiary and Cretaceous core material from a 1,320-foot-deep test borehole at Freehold, New Jersey. The cored materials are sediments that form a multilayered aquifer system of seven aquifers and eight confining units in the New Jersey Coastal Plain. The sediments are of marine origin in the upper 650 feet of the core and primarily nonmarine below 650 feet. Total concentrations of silica and major anions (SO 4 -2 and Cl - ) and cations (Ca +2 , Mg +2 , total Fe, Mn +2 , Na + , and K + ) in the pore-water samples varied with depth. Three core intervals are defined by water- chemistry variations, the environment of deposition (marine or nonmarine), and the degree of alteration (weathered or unweathered) of the units. Calcium, magnesium, sulfate, and total-ion concentrations were greater in the midcore (unweathered marine) interval than in the upper (weathered marine) and lower (fluviodeltaicsilicate) intervals of the core. Generally, pore-water chemical types in confining units were distinct from those found in aquifers–particularly in the midcore interval. In this interval, observed variations in pore-water chemistry in part reflect carbonate dissolution and cation exchange reactions common in Coastal Plain sediments. However, high concentrations of sulfate in unweathered marine sediments indicate novel processes may be important factors influencing pore-water chemistry in confining units.

Groundwater

Mercury in waters, soils, and sediments of the New Jersey Coastal Plain: A comparison of regional distribution and mobility with the mercury contamination at the William J. Hughes Technical Center, Atlantic County, New Jersey

Mercury in soils, surface water, and groundwater at the William J. Hughes Technical Center , Atlantic County, New Jersey, has been found at levels that exceed established background concentrations in Coastal Plain waters, and, in some cases, New Jersey State standards for mercury in various media. As of 2012, it is not known whether this mercury is part of regional mercury contamination or whether it is related to former military activities. Regionally, groundwater supplying about 700 domestic wells in the New Jersey Coastal Plain is contaminated with mercury that appears to be derived from anthropogenic inputs, such as agricultural pesticide use and atmospheric deposition. High levels of mercury occasionally are found in Coastal Plain soils, but disturbance during residential development on former agricultural land is thought to have mobilized any mercury applied during farming, a hypothesis borne out by experiments leaching mercury from soils. In the unsewered residential areas with mercury-contaminated groundwater, septic-system effluent is believed to create reducing conditions in which mercury sorbed to subsoils is mobilized to groundwater. In comparing the levels of mercury found in soils, sediments, streamwater, and groundwater at the William J. Hughes Technical Center site with those found regionally, mercury concentrations in groundwater in the region are, in some cases, substantially higher than those found in groundwater at the William J. Hughes Technical Center site. Nevertheless, concentrations of mercury in streamwater at the site are, in some instances, higher than most found regionally. The mercury contents in soils and sediment at the William J. Hughes Technical Center site are substantially higher than those found to date (2012) in the region, indicating that a source other than regional sources may be present at the site.

New Jersey

Sea-floor morphology and sedimentary environments of western Block Island Sound, northeast of Gardiners Island, New York

Multibeam-echosounder data, collected during survey H12299 by the National Oceanic and Atmospheric Administration in a 162-square-kilometer area of Block Island Sound, northeast of Gardiners Island, New York, are used along with sediment samples and bottom photography, collected at 37 stations in this area by the U.S. Geological Survey during cruise 2013-005-FA, to interpret sea-floor features and sedimentary environments. These data and interpretations provide important base maps for future studies of the sea floor, focused, for example, on benthic ecology and resource management. The features and sedimentary environments on the sea floor are products of the glacial history and modern tidal regime. Features include bedforms such as sand waves and megaripples, boulders, a large current-scoured depression, exposed glaciolacustrine sediments, and areas of modern marine sediment. Sand covers much of the study area and is often in the form of sand waves and megaripples, which indicate environments characterized by coarse-grained bedload transport. Boulders and gravelly lag deposits, which indicate environments of erosion or nondeposition, are found off the coast of Gardiners Island and on bathymetric highs, probably marking areas where deposits associated with recessional ice-front positions, the northern flank of the terminal moraine, or coastal-plain sediments covered with basal till are exposed. Bottom photographs and video of boulders show that they are commonly covered with sessile fauna. Strong tidal currents have produced the deep scour depression along the northwestern edge of the study area. The eastern side of this depression is armored with a gravel lag. Sea-floor areas characterized by modern marine sediments appear featureless at the 2-meter resolution of the bathymetry and flat to current rippled in the photography. These modern environments are indicative of sediment sorting and reworking.

New York

Cenozoic stratigraphy and structure of the Chesapeake Bay region

The Salisbury embayment is a broad tectonic downwarp that is filled by generally seaward-thickening, wedge-shaped deposits of the central Atlantic Coastal Plain. Our two-day field trip will take us to the western side of this embayment from the Fall Zone in Washington, D.C., to some of the bluffs along Aquia Creek and the Potomac River in Virginia, and then to the Calvert Cliffs on the western shore of the Chesapeake Bay. We will see fluvial-deltaic Cretaceous deposits of the Potomac Formation. We will then focus on Cenozoic marine deposits. Transgressive and highstand deposits are stacked upon each other with unconformities separating them; rarely are regressive or lowstand deposits preserved. The Paleocene and Eocene shallow shelf deposits consist of glauconitic, silty sands that contain varying amounts of marine shells. The Miocene shallow shelf deposits consist of diatomaceous silts and silty and shelly sands. The lithology, thickness, dip, preservation, and distribution of the succession of coastal plain sediments that were deposited in our field-trip area are, to a great extent, structurally controlled. Surficial and subsurface mapping using numerous continuous cores, auger holes, water-well data, and seismic surveys has documented some folds and numerous high-angle reverse and normal faults that offset Cretaceous and Cenozoic deposits. Many of these structures are rooted in early Mesozoic and/or Paleozoic NE-trending regional tectonic fault systems that underlie the Atlantic Coastal Plain. On Day 1, we will focus on two fault systems (stops 1–2; Stafford fault system and the Skinkers Neck–Brandywine fault system and their constituent fault zones and faults). We will then see (stops 3–5) a few of the remaining exposures of largely unlithified marine Paleocene and Eocene strata along the Virginia side of the Potomac River including the Paleocene-Eocene Thermal Maximum boundary clay. These exposures are capped by fluvial-estuarine Pleistocene terrace deposits. On Day 2, we will see (stops 6–9) the classic Miocene section along the ~25 miles (~40 km) of Calvert Cliffs in Maryland, including a possible fault and structural warping. Cores from nearby test holes will also be shown to supplement outcrops.

Chesapeake Bay

The impact of 3D structure on coseismic coastal land-level change and tsunami generation in the Cascadia Subduction Zone

Estimates of coseismic vertical displacements from past and potential future subduction zone earthquakes provide critical constraints on regional seismic and tsunami hazard. Many studies use elastic homogeneous half-space models to calculate vertical displacements from a specified earthquake slip distribution, neglecting complexities of 3D structure in subduction zone settings. Here, we use 3D ground motion simulations of potential Cascadia Subduction Zone earthquakes to investigate the impact of realistic 3D Earth structure on estimated vertical displacements. We show that offshore uplift increases when including 3D structure due to high fault slip in low-rigidity accretionary wedge sediments and coastal subsidence decreases due to higher rigidity material at depth. These larger offshore uplifts cause increased tsunami maximum wave heights, and coastal subsidence at paleoseismic sites decreases on average by ∼17 cm, or ∼60%, which can have important implications for the amplitude and extent of slip in earthquake scenarios developed based on paleoseismic data constraints.

California, Oregon, Washington

Compilation of ground water quality data in Pennsylvania

The U.S. Geological Survey's water quality file of 4,671 wells and springs in Pennsylvania provided ground-water-quality data for Pennsylvania. The data were assembled into computer-readable format and sorted into 15 major aquifer groups based on principal lithology, physiographic province, and age. Nineteen variables in each group were summarized by the Statistical Analysis Systems UNIVARIATE procedures to produce descriptive statistics including extreme values and quartiles. The bulk of the water-quality data are in the important aquifers in the unconsolidated Coastal Plain sediments, the Triassic sedimentary rocks, the igneous and metamorphic rocks, and the carbonate rocks. On the other hand, water-quality data for aquifer groups in the Appalachian Plateau and Valley and Ridge Province are sparse. Statewide, only six wells provide sufficient long-term data for trend analyses. Ground-water quality in Pennsylvania is highly diverse. High concentrations of dissolved solids, iron, manganese, sulfate, and nitrate are prevalent forms of natural and manmade contamination. The unconsolidated Coastal Plain aquifers have been most severely degraded. On the other hand, some of the best quality water is found in the quartzite, sandstone, and conglomerate rock units in the Cambrian and Precambrian rocks.

Open-File Report

The discharge of nitrate-contaminated groundwater from developed shoreline to marsh-fringed estuary

As residential development, on-site wastewater disposal, and groundwater contamination increase in the coastal zone, assessment of nutrient removal by soil and sedimentary processes becomes increasingly important. Nitrogen removal efficiency depends largely on the specific flow paths taken by groundwater as it discharges into nitrogen-limited estuarine waters. Shoreline salinity surveys, hydraulic studies, and thermal infrared imagery indicated that groundwater discharge into the Nauset Marsh estuary (Eastham, Massachusetts) occurred in high-velocity seeps immediately seaward of the upland-fringing salt marsh. Discharge was highly variable spatially and occurred through permeable, sandy sediments during low tide. Seepage chamber monitoring showed that dissolved inorganic nitrogen (principally nitrate) traversed nearly conservatively from the aquifer through shallow estuarine sediments to coastal waters at flux rates of 1–3 mmol m −2 h −1 . A significant relationship between pore water NO 3 -N concentrations and NO 3 -N flux rates may provide a rapid method of estimating nitrogen loading from groundwater to the water column.

Massachusets

Integrating geophysical and oceanographic data to assess interannual variability in longshore sediment transport

Despite their utility for prediction of coastal behavior and for coastal management, littoral sediment budgets are difficult to quantify over large regions of coastline and over short time scales. In this study, bathymetric change analysis shows differences in the magnitude and spatial location of erosion and accretion over three years; more net accumulation occurred at the littoral end point of the system in the second year (2012-2013) compared to the first (2011-2012). However, the estimated magnitude of longshore transport based on wave characteristics was lower in the second year than for the first year. Similarly, comparisons of total water levels and island elevation over the study period show increased number of overwash hours in the second year, indicating increased cross-shore sediment losses and presumably less sediment transported alongshore. The storm-mediated degradation of the man-made northern portion of the island resulting in increased sub-aqueous sediment availability may explain the observations.

Conference Paper

Digital elevations and extents of regional hydrogeologic units in the Northern Atlantic Coastal Plain aquifer system from Long Island, New York, to North Carolina

Digital geospatial datasets of the extents and top elevations of the regional hydrogeologic units of the Northern Atlantic Coastal Plain aquifer system from Long Island, New York, to northeastern North Carolina were developed to provide an updated hydrogeologic framework to support analysis of groundwater resources. The 19 regional hydrogeologic units were delineated by elevation grids and extent polygons for 20 layers: the land and bathymetric surface at the top of the unconfined surficial aquifer, the upper surfaces of 9 confined aquifers and 9 confining units, and the bedrock surface that defines the base of all Northern Atlantic Coastal Plain sediments. The delineation of the regional hydrogeologic units relied on the interpretive work from source reports for New York, New Jersey, Delaware and Maryland, Virginia, and North Carolina rather than from re-analysis of fundamental hydrogeologic data. This model of regional hydrogeologic unit geometries represents interpolation, extrapolation, and generalization of the earlier interpretive work. Regional units were constructed from available digital data layers from the source studies in order to extend units consistently across political boundaries and approximate units in offshore areas. Though many of the Northern Atlantic Coastal Plain hydrogeologic units may extend eastward as far as the edge of the Atlantic Continental Shelf, the modeled boundaries of all regional hydrogeologic units in this study were clipped to an area approximately defined by the furthest offshore extent of fresh to brackish water in any part of the aquifer system, as indicated by chloride concentrations of 10,000 milligrams per liter. Elevations and extents of units that do not exist onshore in Long Island, New York, were not included north of New Jersey. Hydrogeologic units in North Carolina were included primarily to provide continuity across the Virginia-North Carolina State boundary, which was important for defining the southern edge of the Northern Atlantic Coastal Plain study area.

Delaware, Maryland, New Jersey, New York, North Ca