SEARCH · Search USGS

Results for “Atmospheric Environment”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12Linked to original sources

USGS2018

Analysis of the impact of African dust storms on the presence of enteric viruses in the atmosphere in Tenerife, Spain

Airborne viruses and their relation to dust storms, as a possible route for dispersion, have not been widely investigated. There are, however, studies that have described the airborne dispersal of pathogenic viruses and their potential impact on public and agronomical health. Atmospheric samples were collected in an urban area of Tenerife during 2009, 2010, 2012 and 2013 and screened for the presence of enteric viruses using PCR and sequencing. The potential relationship of viral data with African dust storms and other climatic variables (viz., the seasonality, origin of the air mass and PM levels) was analyzed. Enteroviruses and Rotaviruses were detected in 15.4% (20/130) and 36.9% (48/130) of the samples, respectively. No significant statistical relationships were observed with African dust storms or the origin of the air masses, although higher percentages of positives were obtained for dust storm days. Enterovirus detection was significantly linked to warmer seasons, and PM 2.5 levels showed an inverse correlation with a rotaviral presence. This is the first multi-year report to describe the presence of Enterovirus and Rotavirus genetic sequences in air samples collected in an outdoor urban environment. The data illustrates the need for source region sampling to determine links and the influence of the weather and climatic and regional wind patterns on long-range atmospheric dispersion of viruses in future research efforts.

Tenerife↗

USGS2015

Remote sensing systems – Platforms and sensors: Aerial, satellites, UAVs, optical, radar, and LiDAR

The American Society of Photogrammetry and Remote Sensing defined remote sensing as the measurement or acquisition of information of some property of an object or phenomenon, by a recording device that is not in physical or intimate contact with the object or phenomenon under study (Colwell et al., 1983). Environmental Systems Research Institute (ESRI) in its geographic information system (GIS) dictionary defines remote sensing as “collecting and interpreting information about the environment and the surface of the earth from a distance, primarily by sensing radiation that is naturally emitted or reflected by the earth’s surface or from the atmosphere, or by sending signals transmitted from a device and reflected back to it (ESRI, 2014).” The usual source of passive remote sensing data is the measurement of reflected or transmitted electromagnetic radiation (EMR) from the sun across the electromagnetic spectrum (EMS); this can also include acoustic or sound energy, gravity, or the magnetic field from or of the objects under consideration. In this context, the simple act of reading this text is considered remote sensing. In this case, the eye acts as a sensor and senses the light reflected from the object to obtain information about the object. It is the same technology used by a handheld camera to take a photograph of a person or a distant scenic view. Active remote sensing, however, involves sending a pulse of energy and then measuring the returned energy through a sensor (e.g., Radio Detection and Ranging [RADAR], Light Detection and Ranging [LiDAR]). Thermal sensors measure emitted energy by different objects. Thus, in general, passive remote sensing involves the measurement of solar energy reflected from the Earth’s surface, while active remote sensing involves synthetic (man-made) energy pulsed at the environment and the return signals are measured and recorded.

Book chapter↗

USGS2010

A global overview of drought and heat-induced tree mortality reveals emerging climate change risks for forests

Greenhouse gas emissions have significantly altered global climate, and will continue to do so in the future. Increases in the frequency, duration, and/or severity of drought and heat stress associated with climate change could fundamentally alter the composition, structure, and biogeography of forests in many regions. Of particular concern are potential increases in tree mortality associated with climate-induced physiological stress and interactions with other climate-mediated processes such as insect outbreaks and wildfire. Despite this risk, existing projections of tree mortality are based on models that lack functionally realistic mortality mechanisms, and there has been no attempt to track observations of climate-driven tree mortality globally. Here we present the first global assessment of recent tree mortality attributed to drought and heat stress. Although episodic mortality occurs in the absence of climate change, studies compiled here suggest that at least some of the world's forested ecosystems already may be responding to climate change and raise concern that forests may become increasingly vulnerable to higher background tree mortality rates and die-off in response to future warming and drought, even in environments that are not normally considered water-limited. This further suggests risks to ecosystem services, including the loss of sequestered forest carbon and associated atmospheric feedbacks. Our review also identifies key information gaps and scientific uncertainties that currently hinder our ability to predict tree mortality in response to climate change and emphasizes the need for a globally coordinated observation system. Overall, our review reveals the potential for amplified tree mortality due to drought and heat in forests worldwide.

Forest Ecology and Management↗

USGS2015

Global patterns and environmental controls of perchlorate and nitrate co-occurrence in arid and semi-arid environments

Natural perchlorate (ClO 4 − ) is of increasing interest due to its wide-spread occurrence on Earth and Mars, yet little information exists on the relative abundance of ClO 4 − compared to other major anions, its stability, or long-term variations in production that may impact the observed distributions. Our objectives were to evaluate the occurrence and fate of ClO 4 − in groundwater and soils/caliche in arid and semi-arid environments (southwestern United States, southern Africa, United Arab Emirates, China, Antarctica, and Chile) and the relationship of ClO 4 − to the more well-studied atmospherically deposited anions NO 3 − and Cl − as a means to understand the prevalent processes that affect the accumulation of these species over various time scales. ClO 4 − is globally distributed in soil and groundwater in arid and semi-arid regions on Earth at concentrations ranging from 10 −1 to 10 6 μg/kg. Generally, the ClO 4 − concentration in these regions increases with aridity index, but also depends on the duration of arid conditions. In many arid and semi-arid areas, NO 3 − and ClO 4 − co-occur at molar ratios (NO 3 − /ClO 4 − ) that vary between ∼10 4 and 10 5 . We hypothesize that atmospheric deposition ratios are largely preserved in hyper-arid areas that support little or no biological activity (e.g. plants or bacteria), but can be altered in areas with more active biological processes including N 2 fixation, N mineralization, nitrification, denitrification, and microbial ClO 4 − reduction, as indicated in part by NO 3 − isotope data. In contrast, much larger ranges of Cl − /ClO 4 − and Cl − /NO 3 − ratios indicate Cl − varies independently from both ClO 4 − and NO 3 − . The general lack of correlation between Cl − and ClO 4 − or NO 3 − implies that Cl − is not a good indicator of co-deposition and should be used with care when interpreting oxyanion cycling in arid systems. The Atacama Desert appears to be unique compared to all other terrestrial locations having a NO 3 − /ClO 4 − molar ratio ∼10 3 . The relative enrichment in ClO 4 − compared to Cl − or NO 3 − and unique isotopic composition of Atacama ClO 4 − may reflect either additional in-situ production mechanism(s) or higher relative atmospheric production rates in that specific region or in the geological past. Elevated concentrations of ClO 4 − reported on the surface of Mars, and its enrichment with respect to Cl − and NO 3 − , could reveal important clues regarding the climatic, hydrologic, and potentially biologic evolution of that planet. Given the highly conserved ratio of NO 3 − /ClO 4 − in non-biologically active areas on Earth, it may be possible to use alterations of this ratio as a biomarker on Mars and for interpreting major anion cycles and processes on both Mars and Earth, particularly with respect to the less-conserved NO 3 − pool terrestrially.

Geochimica et Cosmochimica Acta↗

USGS2021

Modern Mars' geomorphological activity, driven by wind, frost, and gravity

Extensive evidence of landform-scale martian geomorphic changes has been acquired in the last decade, and the number and range of examples of surface activity have increased as more high-resolution imagery has been acquired. Within the present-day Mars climate, wind and frost/ice are the dominant drivers, resulting in large avalanches of material down icy, rocky, or sandy slopes; sediment transport leading to many scales of aeolian bedforms and erosion; pits of various forms and patterned ground; and substrate material carved out from under subliming ice slabs. Due to the ability to collect correlated observations of surface activity and new landforms with relevant environmental conditions with spacecraft on or around Mars, studies of martian geomorphologic activity are uniquely positioned to directly test surface-atmosphere interaction and landform formation/evolution models outside of Earth. In this paper, we outline currently observed and interpreted surface activity occurring within the modern Mars environment, and tie this activity to wind, seasonal surface CO2 frost/ice, sublimation of subsurface water ice, and/or gravity drivers. Open questions regarding these processes are outlined, and then measurements needed for answering these questions are identified. In the final sections, we discuss how many of these martian processes and landforms may provide useful analogs for conditions and processes active on other planetary surfaces, with an emphasis on those that stretch the bounds of terrestrial-based models or that lack terrestrial analogs. In these ways, modern Mars presents a natural and powerful comparative planetology base case for studies of Solar System surface processes, beyond or instead of Earth.

Geomorphology↗

USGS1999

Oil

Each year, an average of 14 million gallons of oil from more than 10,000 accidental spills flow into fresh and saltwater environments in and around the United States. Most accidental oil spills occur when oil is transported by tankers or barges, but oil is also spilled during highway, rail, and pipeline transport, and by nontransportation-related facilities, such as refinery, bulk storage, and marine and land facilities (Fig. 42.1). Accidental releases, however, account for only a small percentage of all oil entering the environment; in heavily used urban estuaries, the total petroleum hydrocarbon contributions due to transportation activities may be 10 percent or less. Most oil is introduced to the environment by intentional discharges from normal transport and refining operations, industrial and municipal discharges, used lubricant and other waste oil disposal, urban runoff, river runoff, atmospheric deposition, and natural seeps. Oil-laden wastewater is often released into settling ponds and wetlands (Fig. 42.2). Discharges of oil field brines are a major source of the petroleum crude oil that enters estuaries in Texas.

Information and Technology Report↗

USGS1996

Sustainability in a materials world

Many adverse impacts on the environment can be directly related to the materials dispersed to the environment during processing or use, or after use as refuse and waste. Some materials, such as toxic wastes, are a major concern because they create immediate problems with longer-term effects. Gases released by major manufacturing industries can contribute to long-term regional and global problems such as acid rain or increased carbon dioxide in the atmosphere. The use of other materials, however, appears to be more benign or strictly localized in their impacts. If the current per capita level of material consumption in the United States was achieved worldwide, it would create major stresses on both resource adequacy and the environment. In fact, stresses have been created and will continue from this consumption style (developed countries) even if others don't achieve them.

Natural Resources Research↗

USGS2001

Effect of basin physical characteristics on solute fluxes in nine alpine/subalpine basins, Colorado, USA

Alpine/subalpine basins may exhibit substantial variability in solute fluxes despite many apparent similarities in basin characteristics. An evaluation of controls on spatial patterns in solute fluxes may allow development of predictive tools for assessing basin sensitivity to outside perturbations such as climate change or deposition of atmospheric pollutants. Relationships between basin physical characteristics, determined from geographical information system (GIS) tools, and solute fluxes and mineral weathering rates were explored for nine alpine/subalpine basins in Rocky Mountain National Park, Colorado, using correlation analyses for 1993 and 1994 data. Stream-water nitrate fluxes were correlated positively with basin characteristics associated with the talus environment; i.e., the fractional amounts of steep slopes (??? 30??), unvegetated terrain and young debris (primarily Holocene till) in the basins, and were correlated negatively with fractional amounts of subalpine meadow terrain. Correlations with nitrate indicate the importance of the talus environment in promoting nitrate flux and the mitigating effect of areas with established vegetation, such as subalpine meadows. Total mineral weathering rates for the basins ranged from about 300 to 600 mol ha-1 year -1. Oligoclase weathering accounted for 30 to 73% of the total mineral weathering flux, and was positively correlated with the amount of old debris (primarily Pleistocene glacial till) in the basins. Although calcite is found in trace amounts in bedrock, calcite weathering accounted for up to 44% of the total mineral weathering flux. Calcite was strongly correlated with steep slope, unvegetated terrain, and young debris-probably because physical weathering in steep-gradient areas exposes fresh mineral surfaces that contain calcite for chemical weathering. Oligoclase and calcite weathering are the dominant sources of alkalinity in the basins. However, atmospherically deposited acids consume much of the alkalinity generated by weathering of calcite and other minerals in the talus environment. Published in 2001 by John Wiley and Sons, Ltd.

Hydrological Processes↗

USGS2023

Initial comparison of pollen counting methods using precipitation and ambient air samples and automated artificial intelligence to support national monitoring objectives

Given the endemic nature of pollen throughout the environment, the impact upon human health, and the need for more extensive and better measurements of pollen in the USA, a preliminary project within the National Atmospheric Deposition Program’s (NADP) National Trends Network (NTN) was developed. Pollen was measured in ambient air by several methods and in precipitation wet deposition samples at three monitoring sites in the NTN. A method for counting pollen on filters was developed and provided pollen counts for NADP atmospheric wet-deposition samples and high-volume ambient air samplers (HVAS) for comparison with co-located traditional National Allergy Bureau microscopy samples and a commercially available pollen sensor (PS) counting method during the 2021 pollen season. The goals of this project were to test the potential of available air-monitoring infrastructures to obtain improved spatial measurements of aeroallergens, compare pollen counting results from the various methods, and to determine the suitability of using wet deposition samples for pollen collection. The onset and senescence of pollen seasons for general categories of genera compared favorably for each method at each site, indicating that pollen monitoring using wet-deposition and ambient air sampling filters could provide useful information to inform scientific studies, but not likely for public health objectives. Pollen counts were log transformed for Pearson product moment correlation. Tree pollen counts were correlated at all sites for daily PS data and traditional counting data ( R = 0.69–0.84), but statistical correlations between methods for grass and weed pollen were weak (0.40 < R < 0.60) or considered not correlated ( R < 0.40). Total pollen counts in NADP precipitation samples were correlated with traditional and PS counts at only one of three sites. Pollen counts for the weekly HVAS filter samples were correlated with PS counts for trees ( R = 0.62) and with NAB counts for trees ( R = 0.68) and weeds ( R = 0.72). Correlations in the data between methods suggest that, given further methods development, a variety of techniques could be integrated to expand and enhance existing pollen monitoring networks. Improved ambient air and atmospheric deposition sampling methods specifically targeted for pollen capture and analysis could support the collection of accurate and efficient meaningful aeroallergen data from existing atmospheric monitoring networks.

Aerobiologia↗

USGS2020

From pools to flow: The PROMISE framework for new insights on soil carbon cycling in a changing world

Soils represent the largest terrestrial reservoir of organic carbon, and the balance between soil organic carbon (SOC) formation and loss will drive powerful carbon‐climate feedbacks over the coming century. To date, efforts to predict SOC dynamics have rested on pool‐based models, which assume classes of SOC with internally homogenous physicochemical properties. However, emerging evidence suggests that soil carbon turnover is not dominantly controlled by the chemistry of carbon inputs, but rather by restrictions on microbial access to organic matter in the spatially heterogeneous soil environment. The dynamic processes that control the physicochemical protection of carbon translate poorly to pool‐based SOC models; as a result, we are challenged to mechanistically predict how environmental change will impact movement of carbon between soils and the atmosphere. Here, we propose a novel conceptual framework to explore controls on belowground carbon cycling: P robabilistic R epresentation of O rganic M atter I nteractions within the S oil E nvironment (PROMISE). In contrast to traditional model frameworks, PROMISE does not attempt to define carbon pools united by common thermodynamic or functional attributes. Rather, the PROMISE concept considers how SOC cycling rates are governed by the stochastic processes that influence the proximity between microbial decomposers and organic matter, with emphasis on their physical location in the soil matrix. We illustrate the applications of this framework with a new biogeochemical simulation model that traces the fate of individual carbon atoms as they interact with their environment, undergoing biochemical transformations and moving through the soil pore space. We also discuss how the PROMISE framework reshapes dialogue around issues related to SOC management in a changing world. We intend the PROMISE framework to spur the development of new hypotheses, analytical tools, and model structures across disciplines that will illuminate mechanistic controls on the flow of carbon between plant, soil, and atmospheric pools.

Global Change Biology↗

USGS2024

Decoding paleomire conditions of Paleogene superhigh-organic-sulfur coals

Superhigh-organic‑sulfur (SHOS) coals (coals with organic sulfur content >4 wt%) are unique coal deposits found at a few notable locations in the world. Specific peat accumulation and preservation conditions must be met to form SHOS coals. Organic sulfur is a major constituent of such coals, and it may have various sources depending on the prevailing paleomire conditions. Understanding such paleomire conditions sheds light on the formation mechanisms of SHOS coals. This investigation decodes the paleomire conditions of the Paleogene SHOS coals from Meghalaya, India, using sulfur isotopic compositions ( δ 34 S) of organic sulfur ( δ 34 S OS ) and pyritic sulfur ( δ 34 S Py ) along with organic petrography, pyrite morphology and trace element ratios. Thirty coal samples were collected from the Jaintia Hills in the east, Khasi Hills in the middle, and Garo Hills in the west of Meghalaya. The organic sulfur content in the Garo, Khasi, and Jaintia coals varies from 1.0 to 3.3 wt%, 1.4 to 13.8 wt%, and 1.0 to 7.2 wt%, respectively. Further, after separation from pyritic sulfur and sulfate sulfur phases, the organic sulfur content ranges from 54.4 to 69.2%, 63.8 to 79.9%, and 59.3 to 73.8%, in the Garo, Khasi, and Jaintia Hills, respectively, suggesting the SHOS nature of these coal samples. The δ 34 S Py varies from −29.3 ‰ to +5.7 ‰, −21.3 ‰ to +27.3 ‰, and −12.1 ‰ to −4.3 ‰, in the Jaintia, Khasi, and Garo Hills, respectively, while the δ 34 S OS fluctuates from −4.6 ‰ to +3.7 ‰, −9.3 ‰ to +7.8 ‰, and − 9.0 ‰ to −5.0 ‰, respectively. The δ 34 S values of pyrite and organic sulfur (OS) in Jaintia coals are 34 S depleted compared to seawater sulfate (+22 ‰), leading to fractionations in the range of −51.3 ‰ to −16.3 ‰ (mean − 31.6 ‰) and − 26.6 ‰ to −18.3 ‰ (mean − 23.1 ‰) for pyritic and organic sulfur (OS), respectively. Pyrite in Khasi coals show a relatively heavier δ 34 S composition averaging at −20.5 ‰, whereas organic sulfur (OS) isotope compositions range from −31.3 ‰ to −14.2 ‰ with a mean of −22.6 ‰. Pyrite and OS in the Garo coals are depleted compared to seawater sulfate. Isotope variations in the Jaintia, Khasi, and Garo coals indicate microbial sulfate reduction (MSR) of seawater sulfate. Large isotopic fractionations between Eocene seawater sulfate and pyritic sulfur ( Δ 34 S SO4Eocene – pyrite = up to −51.3 ‰; mean − 31.6 ‰) in Jaintia coals indicate their possible formation in the water column/near the sediment-seawater interface (open system) and also hint toward dissimilatory sulfate reduction pathways that prevailed under anoxic redox conditions. However, mean values of Δ 34 S SO4Eocene – pyrite (−20.5 ‰) in the Khasi coals imply pyrite formation deeper in the sediments (more closed system) under dysoxic conditions. The dominance of OS over pyritic sulfur, framboidal pyrite, and its microcrystal size distributions in Jaintia coals may suggest syngenetic pyrite formation in open water reducing/anoxic conditions under paralic environments. Elevated Sr/Ba and U/Th values in these coals further confirm the anoxic conditions. Nevertheless, the presence of euhedral pyrite with the alleviated pyrite framboids in the Khasi coals and their complete absence in the Garo coals may suggest dysoxic-suboxic and suboxic-oxic depositional conditions, respectively. The isotopic signatures of the Garo coals suggest sulfur contribution from the parent paleobiota and MSR under a freshwater-oxic environment. Insignificant fractionations between δ 34 S Py and δ 34 S OS indicate limited iron and sulfate availability for additional sulfur cycling and disproportionation reactions, typical of oxic conditions. The absence of framboidal pyrite, elevated sulfate concentration, and mean Sr/Ba and U/Th values of 0.5 and 0.3, respectively, further suggest the freshwater peat deposition in the Garo Hills under limnotelmatic to telmatic freshwater conditions. Moreover, high inertinite content (I mmf = 9.77–33.16 vol%), possibly induced by atmospheric peat exposure, supports the interpretation of suboxic-oxic paleomire conditions in Garo Hills. Gradually decreasing mineral matter content from Jaintia (mean 13.6 vol%) to Garo coals (mean 7.4 vol%) additionally projects a transition from mesotrophic brackish to freshwater limnotelmatic environment, complementing the shift in the paleomire condition from eastern (Jaintia) to western (Garo) Meghalayan Hills.

International Journal of Coal Geology↗

USGS2011

Can elevated CO 2 modify regeneration from seed banks of floating freshwater marshes subjected to rising sea-level?

Higher atmospheric concentrations of CO 2 can offset the negative effects of flooding or salinity on plant species, but previous studies have focused on mature, rather than regenerating vegetation. This study examined how interacting environments of CO 2 , water regime, and salinity affect seed germination and seedling biomass of floating freshwater marshes in the Mississippi River Delta, which are dominated by C 3 grasses, sedges, and forbs. Germination density and seedling growth of the dominant species depended on multifactor interactions of CO 2 (385 and 720 μl l -1 ) with flooding (drained, +8-cm depth, +8-cm depth-gradual) and salinity (0, 6% seawater) levels. Of the three factors tested, salinity was the most important determinant of seedling response patterns. Species richness (total = 19) was insensitive to CO 2 . Our findings suggest that for freshwater marsh communities, seedling response to CO 2 is species-specific and secondary to salinity and flooding effects. Elevated CO 2 did not ameliorate flooding or salinity stress. Consequently, climate-related changes in sea level or human-caused alterations in hydrology may override atmospheric CO 2 concentrations in driving shifts in this plant community. The results of this study suggest caution in making extrapolations from species-specific responses to community-level predictions without detailed attention to the nuances of multifactor responses.

Mississippi River Delta↗

USGS2008

Isotope geochemistry of mercury in source rocks, mineral deposits and spring deposits of the California Coast Ranges, USA

We present here the first study of the isotopic composition of mercury in rocks, ore deposits, and active spring deposits from the California Coast Ranges, a part of Earth's crust with unusually extensive evidence of mercury mobility and enrichment. The Franciscan Complex and Great Valley Sequence, which form the bedrock in the California Coast Ranges, are intruded and overlain by Tertiary volcanic rocks including the Clear Lake Volcanic Sequence. These rocks contain two types of mercury deposits, hot-spring deposits that form at shallow depths (< 300??m) and silica-carbonate deposits that extend to depths of 1000??m. Active springs and geothermal areas continue to precipitate Hg and Au and are modern analogues to the fossil hydrothermal systems preserved in the ore deposits. The Franciscan Complex and Great Valley Sequence contain clastic sedimentary rocks with higher concentrations of mercury than volcanic rocks of the Clear Lake Volcanic Field. Mean mercury isotopic compositions (??202Hg) for all three rock units are similar, although the range of values in Franciscan Complex rocks is greater than in either Great Valley or Clear Lake rocks. Hot spring and silica-carbonate mercury deposits have similar average mercury isotopic compositions that are indistinguishable from averages for the three rock units, although ??202Hg values for the mercury deposits have a greater variance than the country rocks. Precipitates from spring and geothermal waters in the area have similarly large variance and a mean ??202Hg value that is significantly lower than the ore deposits and rocks. These observations indicate that there is little or no isotopic fractionation (< ?? 0.5???) during release of mercury from its source rocks into hydrothermal solutions. Isotopic fractionation does appear to take place during transport and concentration of mercury in deposits, however, especially in their uppermost parts. Boiling of hydrothermal fluids, separation of a mercury-bearing CO2 vapor or reduction and volatilization of Hg(0) in the near-surface environment are likely the most important processes causing the observed Hg isotope fractionation. This should result in the release of mercury with low ??202Hg values into the atmosphere from the top of these hydrothermal systems. Estimates of mass balance suggest that residual Hg reservoirs are not measurably enriched in heavy Hg isotopes as a result of this process because only a small amount of Hg (< 4%) leaves actively ore-forming systems. ?? 2008 Elsevier B.V. All rights reserved.

Earth and Planetary Science Letters↗

USGS1969

Equipment and techniques for low-altitude aerial sensing of water-vapor concentration and movement

Progress in the development of equipment and techniques for making rapid measurements of moisture movement through the atmosphere over a large area is described. Airborne sensing elements measure relative humidity, temperature, and air currents. These data are telemetered to a ground-based station and recorded. A radar unit tracks the aircraft and electronically plots its position on a base map of the area being studied. Thus the distribution of atmospheric conditions can be directly related to the underlying terrain and vegetation features.

Remote Sensing of Environment↗

USGS1968

The synthesis of ferroselite from an aqueous solution at low temperature

Ferroselite , FeSe 2 , is commonly associated with sandstone-type uranium deposits. Although it has been previously synthesized, the conditions of synthesis were not applicable to the natural system, and the literature did not provide any information on the formation of natural ferroselite . The U. S. Geological Survey's Ambrosia Lake study, however, was concerned with the formation of ferroselite under more natural conditions. Thus, in this work, the synthesis of ferroselite was restricted to conditions more nearly approaching the conditions of the formation of sandstone-type uranium deposits-a low temperature and an aqueous environment. A solution of sodium seleno-sulfate, Na 2 SSeO 3 , stood in contact with freshly precipitated iron sulfide, FeS, for 10 days under an inert atmosphere at 80° C. The final product was identified by its diffraction pattern and consisted of FeSe 2 mixed with about 10 percent FeS.

Economic Geology↗

USGS2010

Rocky Mountain snowpack physical and chemical data for selected sites, 2009

The Rocky Mountain Snowpack program established a network of snowpack-sampling sites in the Rocky Mountain region from New Mexico to Montana to monitor the chemical content of snow and to understand the effects of regional atmospheric deposition. The U.S. Geological Survey, in cooperation with the National Park Service; the U.S. Department of Agriculture Forest Service; the Colorado Department of Public Health and Environment; Teton County, Wyoming; and others, collected and analyzed snowpack samples annually for 48 or more sites in the Rocky Mountain region during 1993-2009. Sixty-three snowpack-sampling sites were sampled once each in 2009 and data are presented in this report. Data include acid-neutralization capacity, specific conductance, pH, hydrogen ion concentrations, dissolved concentrations of major constituents (calcium, magnesium, sodium, potassium, ammonium, chloride, sulfate, and nitrate), dissolved organic carbon concentrations, snow-water equivalent, snow depth, total mercury concentrations, and ionic charge balance. Quality-assurance data for field and laboratory blanks and field replicates for 2009 also are included.

Data Series↗

USGS2002

Bryophytes and lichens: Small but indispensable forest dwellers

* What is a Bryophyte? * Bryophytes are the small green plants commonly known as mosses, liverworts and hornworts. Compared to plants, they have primitive tissues for conducting food and water, and they lack a protective outer surface to maintain water balance. Most bryophytes, because they lack tissues such as roots, obtain their water through direct surface contact with their environment. During dry weather they have the capacity to withstand complete dehydration. Bryophytes that are dry may appear dead but will regain normal function when moisture is available. Instead of producing seeds, bryophytes can either reproduce sexually by means of spores, or asexually when small pieces break off and grow into new individuals. * What is a Lichen? * Lichens are dual organisms consisting of a fungus and an alga or a cyanobacterium. The fungus provides the alga with structure, protection, nutrients, and water absorbed from the atmosphere and the substrate (e.g., soil, rotten logs, tree branches). In return, the alga provides carbohydrates from photosynthesis to the fungus. Algae from some lichens grow independently of the fungus, but in lichen form, the algae can inhabit more challenging environments than when growing alone. Most lichens can reproduce asexually. They either produce specialized propagules containing both partners, or parts of the lichen simply break, allowing both the fungus and the alga to disperse together. In some lichens, the fungal partner reproduces sexually by releasing spores, but the partner alga must be present in order for a lichen to reform.

Fact Sheet↗

USGS1980

The influences of land use and land cover on climate; an analysis of the Washington-Baltimore area that couples remote sensing with numerical simulation

The Sun drives the atmospheric heat engine by warming the terrestrial surface which in turn warms the atmosphere above. Climate, therefore, is significantly controlled by complex interaction of energy flows near and at the terrestrial surface. When man alters this delicate energy balance by his use of the land, he may alter his climatic environment as well. Land use climatology has emerged as a discipline in which these energy interactions are studied; first, by viewing the spatial distributions of their surface manifestations, and second, by analyzing the energy exchange processes involved. Two new tools for accomplishing this study are presented: one that can interpret surface energy exchange processes from space, and another that can simulate the complex of energy transfers by a numerical simulation model. Use of a satellite-borne multispectral scanner as an imaging radiometer was made feasible by devising a gray-window model that corrects measurements made in space for the effects of the atmosphere in the optical path. The simulation model is a combination of mathematical models of energy transfer processes at or near the surface. Integration of these two analytical approaches was applied to the Washington-Baltimore area to coincide with the August 5, 1973, Skylab 3 overpass which provided data for constructing maps of the energy characteristics of the Earth's surface. The use of the two techniques provides insights into the relationship of climate to land use and land cover and in predicting alterations of climate that may result from alterations of the land surface.

Professional Paper↗