SEARCH · Search USGS

Results for “The Sedimentary Record”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11Linked to original sources

USGS2025

Late Quaternary environmental change in eastern Beringia

Eastern Beringia (Alaska and western Yukon) is an extensive, high-latitude region of North America that remained largely unglaciated throughout the Quaternary. Consequently, its sedimentary deposits preserve long-term environmental records that have intrigued scientists for nearly a century. Recent advances in palaeoecological proxies and dating methods have proved critical in addressing long-standing questions about regional late Quaternary environmental change. At the same time, they have led to new and sometimes controversial hypotheses. This review covers recent discoveries and unresolved questions focused on the period 57,000–10,000 calendar years before C.E. 1950 (cal yr BP). The middle Wisconsin interstadial (57,000–30,000 cal yr BP) was a period of relative warmth in eastern Beringia, compared with the late Wisconsin (30,000–14,000 cal yr BP). Early in the interstadial occasional Picea woodland was present amongst widespread shrub tundra. Palaeoecological, sedimentary and isotopic data indicate that climate was cooler and drier than the Holocene, with high rates of aeolian activity. Megafauna typically associated with the ‘mammoth steppe’ ecosystem (woolly mammoth [ Mammuthus primigenius ], horse [ Equus ] and steppe-bison [ Bison priscus ]) were present in some abundance. The transition towards late Wisconsin cold-stage conditions (35,000–30,000 cal yr BP) coincided with the establishment of the Bering Land Bridge and featured expansion of spatially varied, herbaceous vegetation, sometimes associated with deep active layers. Sedimentary DNA ( seda DNA) and macrofossil evidence show vegetation was not a prairie-like grassland, and the term “steppe-tundra” is a better descriptor. Permafrost pore-ice isotopic (δ 18 O) records suggest a step change in one or more climate drivers ca. 30,000 cal yr BP, by which time steppe-tundra was established across eastern Beringia. It remains uncertain whether Picea survived cold-stage conditions within isolated refugia, or whether it recolonized from south of the Laurentide-Cordilleran ice sheets. Genetic data suggest that Picea probably survived in situ ; however, there is no definitive fossil evidence to support this. The end-Pleistocene transition from steppe-tundra to shrub tundra began ca. 15,000 cal yr BP and took place within decades at local scales. The expansion of woody taxa coincided with rising sea levels, reduced sea-ice extent and an abrupt shift in atmospheric circulation that enhanced precipitation. During this time, Earth's orbital configuration caused high early-summer temperatures and strong seasonality, creating growing conditions very different from today. The vegetation consisted of Salix and Betula shrub tundra with open areas of herbs and graminoids. During the deglacial warming trend, the Younger Dryas oscillation (12,800–11,700 cal yr BP) was variably expressed. It is generally evident in records affected by adjacent oceans but can be absent at sites in continental areas. These past conditions and paleoenvironmental changes have implications for contemporary issues: hypotheses about Pleistocene mammalian extinction; sensitivity of eastern Beringia to major oceanic reorganizations and high-frequency climate variability; the nature of woody plant expansion with climate warming; grazing, hydroclimate and fire as controls over ecosystems; the efficacy of “Pleistocene rewilding” for carbon capture.

Beringia↗

USGS2015

Fluvial-aeolian interactions in sediment routing and sedimentary signal buffering: an example from the Indus Basin and Thar Desert

Sediment production and its subsequent preservation in the marine stratigraphic record offshore of large rivers are linked by complex sediment-transfer systems. To interpret the stratigraphic record it is critical to understand how environmental signals transfer from sedimentary source regions to depositional sinks, and in particular to understand the role of buffering in obscuring climatic or tectonic signals. In dryland regions, signal buffering can include sediment cycling through linked fluvial and eolian systems. We investigate sediment-routing connectivity between the Indus River and the Thar Desert, where fluvial and eolian systems exchanged sediment over large spatial scales (hundreds of kilometers). Summer monsoon winds recycle sediment from the lower Indus River and delta northeastward, i.e., downwind and upstream, into the desert. Far-field eolian recycling of Indus sediment is important enough to control sediment provenance at the downwind end of the desert substantially, although the proportion of Indus sediment of various ages varies regionally within the desert; dune sands in the northwestern Thar Desert resemble the Late Holocene–Recent Indus delta, requiring short transport and reworking times. On smaller spatial scales (1–10 m) along fluvial channels in the northern Thar Desert, there is also stratigraphic evidence of fluvial and eolian sediment reworking from local rivers. In terms of sediment volume, we estimate that the Thar Desert could be a more substantial sedimentary store than all other known buffer regions in the Indus basin combined. Thus, since the mid-Holocene, when the desert expanded as the summer monsoon rainfall decreased, fluvial-eolian recycling has been an important but little recognized process buffering sediment flux to the ocean. Similar fluvial-eolian connectivity likely also affects sediment routing and signal transfer in other dryland regions globally.

Indus Basin, Thar Desert↗

USGS2003

Wide-angle seismic recording from the 2002 Georgia Basin Geohazards Initiative, northwestern Washington and British Columbia

This report describes the acquisition and processing of shallow-crustal wide-angle seismicreflection and refraction data obtained during a collaborative study in the Georgia Strait, western Washington and southwestern British Columbia. The study, the 2002 Georgia Strait Geohazards Initiative, was conducted in May 2002 by the Pacific Geoscience Centre, the U.S. Geological Survey, and the University of Victoria. The wide-angle recordings were designed to image shallow crustal faults and Cenozoic sedimentary basins crossing the International Border in southern Georgia basin and to add to existing wide-angle recordings there made during the 1998 SHIPS experiment. We recorded, at wide-angle, 800 km of shallow penetration multichannel seismic-reflection profiles acquired by the Canadian Coast Guard Ship (CCGS) Tully using an air gun with a volume of 1.967 liters (120 cu. in.). Prior to this reflection survey, we deployed 48 Refteks onshore to record the airgun signals at wide offsets. Three components of an oriented, 4.5 Hz seismometer were digitally recorded at all stations. Nearly 160,300 individual air gun shots were recorded along 180 short seismic reflection lines. In this report, we illustrate the wide-angle profiles acquired using the CCGS Tully, describe the land recording of the air gun signals, and summarize the processing of the land recorder data into common-receiver gathers. We also describe the format and content of the archival tapes containing the SEGY-formated, common-receiver gathers for the Reftek data. Data quality is variable but the experiment provided useful data from 42 of the 48 stations deployed. Three-fourths of all stations yielded useful first-arrivals to source-receiver offsets beyond 10 km: the average maximum source-receiver offset for first arrivals was 17 km. Six stations yielded no useful data and useful firstarrivals were limited to offsets less than 10 km at five stations. We separately archived our recordings of 86 local and regional earthquakes ranging in magnitude from 0.2 to 4.3 and 16 teleseisms ranging in magnitude 5.5 to 6.5.

British Columbia;Washington↗

USGS2006

Acoustic stratigraphy of Bear Lake, Utah-Idaho: late Quaternary sedimentation patterns in a simple half-graben

A 277-km network of high-resolution seismic-reflection profiles, supplemented with a sidescan-sonar mosaic of the lake floor, was collected in Bear Lake, Utah–Idaho, in order to explore the sedimentary framework of the lake's paleoclimate record. The acoustic stratigraphy is tied to a 120 m deep, continuously cored drill hole in the lake. Based on the age model for the drill core, the oldest continuously mapped acoustic reflector in the data set has an age of about 100 ka, although older sediments were locally imaged. The acoustic stratigraphy of the sediments below the lake indicates that the basin developed primarily as a simple half-graben, with a steep normal-fault margin on the east and a flexural margin on the west. As expected for a basin controlled by a listric master fault, seismic reflections steepen and diverge toward the fault, bounding eastward-thickening sediment wedges. Secondary normal faults west of the master fault were imaged beneath the lake and many of these faults show progressively increasing offset with depth and age. Several faults cut the youngest sediments in the lake as well as the modern lake floor. The relative simplicity of the sedimentary sequence is interrupted in the northwestern part of the basin by a unit that is interpreted as a large (4 × 10 km) paleodelta of the Bear River. The delta overlies a horizon with an age of about 97 ka, outcrops at the lake floor and is onlapped by much of the uppermost sequence of lake sediments. A feature interpreted as a wave-cut bench occurs in many places on the western side of the lake. The base of this bench occurs at a depth (22–24 m) similar to that (20–25 m) of the distal surface of the paleodelta. Pinch-outs of sedimentary units are common in relatively shallow water on the gentle western margin of the basin and little Holocene sediment has accumulated in water depths of less than 30 m. On the steep eastern margin of the basin, sediments commonly onlap the hanging wall of the East Bear Lake Fault. However, no major erosional or depositional features suggestive of shoreline processes were observed on acoustic profiles in water deeper than about 20–25 m.

Idaho, Utah↗

USGS2016

The potassic sedimentary rocks in Gale Crater, Mars, as seen by ChemCam Onboard Curiosity

The Mars Science Laboratory rover Curiosity encountered potassium-rich clastic sedimentary rocks at two sites in Gale Crater, the waypoints Cooperstown and Kimberley. These rocks include several distinct meters thick sedimentary outcrops ranging from fine sandstone to conglomerate, interpreted to record an ancient fluvial or fluvio-deltaic depositional system. From ChemCam Laser-Induced Breakdown Spectroscopy (LIBS) chemical analyses, this suite of sedimentary rocks has an overall mean K 2 O abundance that is more than 5 times higher than that of the average Martian crust. The combined analysis of ChemCam data with stratigraphic and geographic locations reveals that the mean K 2 O abundance increases upward through the stratigraphic section. Chemical analyses across each unit can be represented as mixtures of several distinct chemical components, i.e., mineral phases, including K-bearing minerals, mafic silicates, Fe-oxides, and Fe-hydroxide/oxyhydroxides. Possible K-bearing minerals include alkali feldspar (including anorthoclase and sanidine) and K-bearing phyllosilicate such as illite. Mixtures of different source rocks, including a potassium-rich rock located on the rim and walls of Gale Crater, are the likely origin of observed chemical variations within each unit. Physical sorting may have also played a role in the enrichment in K in the Kimberley formation. The occurrence of these potassic sedimentary rocks provides additional evidence for the chemical diversity of the crust exposed at Gale Crater.

Journal of Geophysical Research↗

USGS1999

Site response for Seattle and source parameters of earthquakes in the Puget Sound Region

We analyzed seismograms from 21 earthquakes ( M L 2.0-4.9) recorded by digital seismographs we deployed in urban Seattle to determine site response and earthquake stress drops. The seismometers were situated on a wide variety of geologic units, including artificial fill (e.g., Kingdome, Harbor Island), Pleistocene age soils (glacial till and outwash deposits of Seattle's hills), modified land (downtown Seattle, Space Needle), and Tertiary sedimentary rock. Two mainshock-aftershock sequences were recorded: the June 1997 Bremerton sequence (mainshock M L 4.9) and the February 1997 South Seattle sequence (mainshock M L 3.5), along with other events in the Puget Sound region. We developed a new inversion procedure to estimate site response, source corner frequencies, and seismic moments from the S -wave spectra. This inversion uses corner frequencies determined from spectral ratios of mainshock-aftershock pairs as constraints. The site responses found from the inversion are not relative to the rock site but are relative to an idealized site with a flat frequency response. The response of the rock site is also found from the inversion. The inversion results show high response for the sites on artificial fill, more moderate amplification for most sites on stiff Pleistocene soils or modified land, and low response for the rock site. Some sites display resonances, such as a strong 2-Hz resonance at our site near the Kingdome, which is caused by the surficial layers of fill and younger alluvium. The sites in West Seattle exhibit high amplification, even though they are on relatively stiff soils of glacial outwash. This may be partly caused by basin surface waves produced by conversion of incident S waves. This high response in West Seattle is consistent with damage reports from the 1949 ( m b 7.1) and 1965 ( m b 6.5) earthquakes. Stress-drop estimates for the events we recorded were generally low, between 0.4 and 25 bars, although some of the events may have had higher stress drops that could not be resolved because of the limited passband. We calculated a stress drop of 24 bars for the Bremerton mainshock and 10 bars for the South Seattle mainshock.

Washington↗

USGS2008

Anatomy of a shoreface sand ridge revisited using foraminifera: False Cape Shoals, Virginia/North Carolina inner shelf

Certain details regarding the origin and evolution of shelf sand ridges remain elusive. Knowledge of their internal stratigraphy and microfossil distribution is necessary to define the origin and to determine the processes that modify sand ridges. Fourteen vibracores from False Cape Shoal A, a well-developed shoreface-attached sand ridge on the Virginia/North Carolina inner continental shelf, were examined to document the internal stratigraphy and benthic foraminiferal assemblages, as well as to reconstruct the depositional environments recorded in down-core sediments. Seven sedimentary and foraminiferal facies correspond to the following stratigraphic units: fossiliferous silt, barren sand, clay to sandy clay, laminated and bioturbated sand, poorly sorted massive sand, fine clean sand, and poorly sorted clay to gravel. The units represent a Pleistocene estuary and shoreface, a Holocene estuary, ebb tidal delta, modern shelf, modern shoreface, and swale fill, respectively. The succession of depositional environments reflects a Pleistocene sea-level highstand and subsequent regression followed by the Holocene transgression in which barrier island/spit systems formed along the Virginia/North Carolina inner shelf ???5.2 ka and migrated landward and an ebb tidal delta that was deposited, reworked, and covered by shelf sand.

Continental Shelf Research↗

USGS2012

Re–Os geochronology of the lacustrine Green River Formation: Insights into direct depositional dating of lacustrine successions, Re–Os systematics and paleocontinental weathering

Lacustrine sedimentary successions provide exceptionally high-resolution records of continental geological processes, responding to tectonic, climatic and magmatic influences. These successions are therefore essential for correlating geological and climatic phenomena across continents and furthermore the globe. Producing accurate geochronological frameworks within lacustrine strata is challenging because the stratigraphy is often bereft of biostratigraphy and directly dateable tuff horizons. The rhenium–osmium (Re–Os) geochronometer is a well-established tool for determining precise and accurate depositional ages of marine organic-rich rocks. Lake systems with stratified water columns are predisposed to the preservation of organic-rich rocks and thus should permit direct Re–Os geochronology of lacustrine strata. We present Re–Os systematics from one of the world's best documented lacustrine systems, the Eocene Green River Formation, providing accurate Re–Os depositional dates that are supported by Ar–Ar and U–Pb ages of intercalated tuff horizons. Precision of the Green River Formation Re–Os dates is controlled by the variation in initial 187 Os/ 188 Os and the range of 187 Re/ 188 Os ratios, as also documented in marine systems. Controls on uptake and fractionation of Re and Os are considered to relate mainly to depositional setting and the type of organic matter deposited, with the need to further understand the chelating precursors of Re and Os in organic matter highlighted. In addition to geochronology, the Re–Os data records the 187Os/188Os composition of lake water (1.41–1.54) at the time of deposition, giving an insight into continental runoff derived from weathering of the geological hinterland of the Green River Formation. Such insights enable us to evaluate fluctuations in continental climatic, tectonic and magmatic processes and provide the ability for chemostratigraphic correlation combined with direct depositional dates. Furthermore, initial 187Os/188Os values can be used as a diagnostic tool to distinguish between lacustrine and marine depositional settings when compared to known oceanic 187 Os/ 188 Os values.

Colorado;Utah;Wyoming↗

USGS2009

Sedimentary constraints on late Quaternary lake-level fluctuations at Bear Lake, Utah and Idaho

A variety of sedimentological evidence was used to construct the lake-level history for Bear Lake, Utah and Idaho, for the past ???25,000 years. Shorelines provide evidence of precise lake levels, but they are infrequently preserved and are poorly dated. For cored sediment similar to that in the modern lake, grain-size distributions provide estimates of past lake depths. Sedimentary textures provide a highly sensitive, continuous record of lake-level changes, but the modern distribution of fabrics is poorly constrained, and many ancient features have no modern analog. Combining the three types of data yields a more robust lake-level history than can be obtained from any one type alone. When smooth age-depth models are used, lake-level curves from multiple cores contain inconsistent intervals (i.e., one record indicates a rising lake level while another record indicates a falling lake level). These discrepancies were removed and the multiple records were combined into a single lake-level curve by developing age-depth relations that contain changes in deposition rate (i.e., gaps) where indicated by sedimentological evidence. The resultant curve shows that, prior to 18 ka, lake level was stable near the modern level, probably because the lake was overflowing. Between ca. 17.5 and 15.5 ka, lake level was ???40 m below the modern level, then fluctuated rapidly throughout the post-glacial interval. Following a brief rise centered ca. 15 ka ( = Raspberry Square phase), lake level lowered again to 15-20 m below modern from ca. 14.8-11.8 ka. This regression culminated in a lowstand to 40 m below modern ca. 12.5 ka, before a rapid rise to levels above modern ca. 11.5 ka. Lake level was typically lower than present throughout the Holocene, with pronounced lowstands 15-20 m below the modern level ca. 10-9, 7.0, 6.5-4.5, 3.5, 3.0-2.5, 2.0, and 1.5 ka. High lake levels near or above the modern lake occurred ca. 8.5-8.0, 7.0-6.5, 4.5-3.5, 2.5, and 0.7 ka. This lake-level history is more similar to records from Pyramid Lake, Nevada, and Owens Lake, California, than to those from Lake Bonneville, Utah. Copyright ?? 2009 The Geological Society of America.

Special Paper of the Geological Society of America↗

USGS2019

The Santa Cruz Basin submarine landslide complex, southern California: Repeated failure of uplifted basin sediment

The Santa Cruz Basin (SCB) is one of several fault-bounded basins within the California Continental Borderland that has drawn interest over the years for its role in the tectonic evolution of the region, but also because it contains a record of a variety of modes of sedimentary mass transport (i.e., open slope vs. canyon-confined systems). Here, we present a suite of new high-resolution marine geophysical data that demonstrate the extent and significance of the SCB submarine landslide complex in terms of late Miocene to present basin evolution and regional geohazard assessment. The new data reveal that submarine landslides cover an area of ~160 km2 along the eastern flank of the Santa Rosa–Cortes Ridge and have emplaced a minimum of 9 to 16 km3 of mass transport deposits along the floor of the SCB during the Quaternary. The failures occur along an onlapping wedge of Pliocene sediment that was uplifted and tilted during the later stages of basin development. The uplifted and steepened Pliocene strata were preconditioned for failure so that parts of the section failed episodically throughout the Quaternary—most likely during large earthquakes. Once failed, the material initially translated as a block glide along a defined failure surface. As transport continued several kilometers across a steep section of the lower slope, the material separated into distinctive proximal and distal components. The failed masses mobilized into debris flows that show evidence for dynamic separation into less and more mobile components that disturbed and eroded underlying stratigraphy in areas most proximal to the source area. The most highly mobilized components and those with the lowest viscosity and yield strength produced flows that blanket the underlying stratigraphy along the distal reaches of deposition. The estimated volumes of individual landslides within the complex (0.1–2.6 km3), the runout distance measured from the headwalls (>20 km), and evidence for relatively high velocity during initial mobilization all suggest that slides in the SCB may have been tsunamigenic. Because many slopes in the California Continental Borderland are either sediment starved or have experienced sediment bypass during the Quaternary, we propose that uplift and rotation of Pliocene deposits are important preconditioning factors for slope failure that need to be systematically evaluated as potential tsunami initiators.

California↗

USGS1991

The Cenozoic evolution of the San Joaquin Valley, California

The San Joaquin Valley, which is the southern part of the 700-km-long Great Valley of California, is an asymmetric structural trough that is filled with a prism of upper Mesozoic and Cenozoic sediments up to 9 km thick; these sediments rest on crystalline basement rocks of the southwestward-tilted Sierran block. The San Joaquin sedimentary basin is separated from the Sacramento basin to the north by the buried Stockton arch and associated Stockton fault. The buried Bakersfield arch near the south end of the valley separates the small Maricopa-Tejon subbasin at the south end of the San Joaquin basin from the remainder of the basin. Cenozoic strata in the San Joaquin basin thicken southeastward from about 800 m in the north to over 9,000 m in the south. The San Joaquin Valley can be subdivided into five regions on the basis of differing structural style. They are the northern Sierran block, the southern Sierran block, the northern Diablo homocline, the westside fold belt, and the combined Maricopa-Tejon subbasin and southmargin deformed belt. Considerable facies variation existed within the sedimentary basin, particularly in the Neogene when a thick section of marine sediment accumulated in the southern part of the basin, while a relatively thin and entirely nonmarine section was deposited in the northern part. The northern Sierran block, the stable east limb of the valley syncline between the Stockton fault and the San Joaquin River, is the least deformed region of the valley. Deformation consists mostly of a southwest tilt and only minor late Cenozoic normal faulting. The southern Sierran block, the stable east limb of the valley syncline between the San Joaquin River and the Bakersfield arch, is similar in style to the northern part of the block, but it has a higher degree of deformation. Miocene or older normal faults trend mostly north to northwest and have a net down-to-the-west displacement with individual offsets of as much as 600 m. The northern Diablo homocline, the western limb of the valley syncline between the Stockton arch and Panoche Creek, consists of a locally faulted homocline with northeast dips. Deformation is mostly late Cenozoic, is complex in its history, and has included up-to-the-southwest reverse faulting. The west-side fold belt, the southwestern part of the valley syncline between Panoche Creek and Elk Hills and including the southern Diablo and Temblor Ranges, is characterized by a series of folds and faults trending slightly oblique to the San Andreas fault. Paleogene folding took place in the northern part of the belt; however, most folding took place in Neogene time, during which the intensity of deformation increased southeastward along the belt and southwestward toward the San Andreas fault. The Maricopa-Tejon subbasin and the south-margin deformed belt are structurally distinct, but genetically related, regions bounded by the Bakersfield arch on the north, the San Emigdio Mountains on the south, the Tehachapi Mountains on the east, and the southeast end of the fold belt on the west. This combined region, which is the most deformed part of the basin, has undergone significant late Cenozoic shortening through north-directed thrust faulting at the south margin, as well as extreme Neogene basin subsidence north of the thrust belt. The sedimentary history of the San Joaquin basin, recorded in terms of unconformity-bounded depositional sequences, has been controlled principally by tectonism, but it has also been controlled by eustatic sea-level changes and, to a lesser degree, by climate. Plate tectonic events that had an influence on the basin include (1) subduction during the early Tertiary that changed from oblique to normal convergence in the later part of the Eocene, (2) the mid-Oligocene encounter of the Pacific-Farallon spreading ridge with the trench, and the consequent establishment of the San Andreas transform, (3) the northwestward migration of the Mendocino triple junction that in

Professional Paper↗

USGS2008

Anatomy of a shoreface sand ridge revisted using foraminifera: False Cape Shoals, Virginia/North Carolina inner shelf

Certain details regarding the origin and evolution of shelf sand ridges remain elusive. Knowledge of their internal stratigraphy and microfossil distribution is necessary to define the origin and to determine the processes that modify sand ridges. Fourteen vibracores from False Cape Shoal A, a well-developed shoreface-attached sand ridge on the Virginia/North Carolina inner continental shelf, were examined to document the internal stratigraphy and benthic foraminiferal assemblages, as well as to reconstruct the depositional environments recorded in down-core sediments. Seven sedimentary and foraminiferal facies correspond to the following stratigraphic units: fossiliferous silt, barren sand, clay to sandy clay, laminated and bioturbated sand, poorly sorted massive sand, fine clean sand, and poorly sorted clay to gravel. The units represent a Pleistocene estuary and shoreface, a Holocene estuary, ebb tidal delta, modern shelf, modern shoreface, and swale fill, respectively. The succession of depositional environments reflects a Pleistocene sea-level highstand and subsequent regression followed by the Holocene transgression in which barrier island/spit systems formed along the Virginia/North Carolina inner shelf not, vert, ~5.2 ka and migrated landward and an ebb tidal delta that was deposited, reworked, and covered by shelf sand.

Virginia;North Carolina↗

USGS1981

A process-sedimentary framework for characterizing recent and ancient sabkhas

The discovery of sabkha environments during the 1960's, marked the beginning of Recent evaporite sedimentological studies and their perception as models for facies analysis. However, variation among Recent sabkhas, though recognized by the geologic community, has not been duly addressed, which has resulted in overuse of the Trucial Coast model in comparative sedimentological studies. Knowledge of the dominant physical processes which determine sabkha morphology, and of the sedimentary response to those processes, can lead to a fundamental understanding of a sabkha's origin and of how it differs from other sabkhas. Physical processes thought to be most important (besides evaporation) include those operative under: (1) marine-; (2) fluvial-lacustrine-; and (3) eolian-dominated conditions. Dominance of one or more of these in the proper settings give rise to marine coastal sabkhas, continental playas, and interdune sabkhas. Sedimentary responses to dominant physical processes lead to the development of sabkhas consisting of a combination of either: (1) terrigenous clastics; (2) carbonate-sulfate (anhydrite-gypsum) minerals; or (3) soluble salts (halite, sylvite, polyhalite, etc.). Sediment characterization can also allow discrimination of the range or compositional variety in, for example, coastal sabkhas. Where applied to the stratigraphic record, this classification system may help unravel the sedimentary history of an ancient sabkha system, and a determination of the dominant physical processes that ruled its development.

Sedimentary Geology↗

USGS1986

Geophysical maps of the Dos Cabezas Mountains Wilderness Study Area, Cochise County, Arizona

The Dos Cabezas Mountains Wilderness Study Area, Arizona, lies along part of the crest and northeast flank of the Dos Cabezas Mountains, Cochise County, near the southeast corner of Arizona (fig. 1). The U.S. Bureau of Land Management requested mineral surveys of about 11,921 acres of the approximately 15,000 acre wilderness study area. In this report "wilderness study area" refers to the 11,921 acres that were studied. The Dos Cabezas Mountains are in many ways a typical mountain range of the Basin-and-Range physiographic province. They are a northwest-trending block-faulted range separated from adjacent ranges by broad valleys. The range is about 22 mi long and 8 mi wide, and it reaches an elevation of 8,354 ft at Dos Cabezas Peaks, located about 2 mi west of the study area. The terrain of the area is rugged. Roadheads and trails provide adequate access for foot traverses. In the Dos Cabezas Mountains the Apache Pass fault zone is the major structural feature, barely skirting the southwest side of the study area. It extends several miles to the northwest and tens of miles to the southeast, across the Chiricahua Mountains beyond Apache Pass. It is typically made up of a pair of bounding faults and some anastomosing faults between them. The study area is underlain by a variety of sedimentary, igneous, and metamorphic rocks that provide only a fragmentary record of geologic events between Precambrian and Holocene times. A suite of metamorphic and igneous (primarily crystalline) rocks forms the basement terrain. Paleozoic and Mesozoic sedimentary rocks and also Paleozoic and Mesozoic volcanic rocks overlie the basement rocks but are extensively eroded away and may be covered. A pile of volcanic rocks of Late Cretaceous and Paleocene age caps the older rocks in much of the study area. Mid-Tertiary intrusive rocks underlie the eastern part of the study area as well as some very small, widely scattered additional localities. Quaternary gravel deposits occur in the major valleys and along the mountain front.

Arizona↗

USGS2021

Identifying elusive piercing points along the North American transform margin using mixture modeling of detrital zircon data from sedimentary units and their crystalline sources

The San Gabriel and Canton faults represent early stages in the development of the San Andreas fault system. However, questions of timing of initiation and magnitude of slip on these structures remain unresolved, with published estimates ranging from 42-75 km and likely starting in the Miocene. This uncertainty in slip history reflects an absence of appropriate piercing points. We attempt to better constrain the slip history on these faults by quantifying the changing proportions of source terranes contributing sediment to the Ventura Basin, California, through the Cenozoic, including refining data for a key piercing point. Ventura Basin sediments show an increase in detrital zircon U-Pb dates and mineral abundances associated with crystalline sources in the northern San Gabriel Mountains through time, which we interpret to record the basin’s northwest translation by dextral strike-slip faulting. In particular, an Oligocene unit mapped as part of the extra-regional Sespe Formation instead has greater affinity to the Vasquez Formation. Specifically, the presence of a unimodal population of ~1180 Ma zircon, high (57%) plagioclase content, and proximal alluvial fan facies indicate that the basin was adjacent to the San Gabriel anorthosite during deposition of the Vasquez Formation, requiring 35-60 km of slip on the San Gabriel-Canton fault system. Mixture modeling of detrital zircon data supported by automated mineralogy highlights the importance of this piercing point along the San Gabriel-Canton fault system and suggests that fault slip began during the late Oligocene to early Miocene, which is earlier than published models. These two lines of evidence disagree with recent models that estimate >60 km of offset, requiring a reappraisal of the slip history of an early strand of the San Andreas transform zone.

California↗

USGS2018

Characterizing and imaging sedimentary strata using depth-converted spectral ratios: An example from the Atlantic Coastal Plain of the Eastern U.S.

Unconsolidated, near-surface sediments can have a profound influence on the amplitudes and frequencies of ground shaking during earthquakes, and these effects should be accounted for when using amplitude observations for seismic hazard assessments. This study explores methods to use teleseismic arrivals recorded on linear receiver arrays to characterize widespread, shallow sedimentary deposits, including estimation of the velocities, determination of the fundamental resonance peaks, and imaging of the major reflectors. The examples used are the extensive Atlantic Coastal Plain (ACP) and associated Mississippi Embayment (ME) strata of the Central and Eastern United States. The large contrast in material properties at the bedrock surface beneath these sediments produces a strong fundamental resonance peak in the 0.2 to 4 Hz frequency range, which is estimated here by computing spectral ratios at each receiver site relative to bedrock sites at the ends of the receiver arrays. Sediment thicknesses derived from published contour maps made from drill hole data allow for the computation of average velocities to match the observed frequencies of resonance peaks with theoretical values at each receiver site, with the sloping bedrock surface allowing for computation of an average velocity versus depth function if horizontal layers are assumed. The velocity function is then used to convert the spectral ratios from frequency to depth, resulting in an image of the subsurface similar to that of a seismic reflection profile. The results demonstrate the use of teleseismic signals for characterizing and imaging shallow sedimentary strata.

Atlantic Coastal Plain↗

USGS2000

Recognition of primary and diagenetic magnetizations to determine the magnetic polarity record and timing of deposition of the moat-fill rocks of the Oligocene Creede Caldera, Colorado

Sedimentary and volcaniclastic rocks of the Oligocene Creede Formation fill the moat of the Creede caldera, which formed at about 26.9 Ma during the eruption of the Snowshoe Mountain Tuff. Paleomagnetic and rock magnetic studies of two cores (418 and 703 m long) that penetrated the lower half of the Creede Formation, in addition to paleomagnetic and isotopic dating studies of stratigraphically bracketing volcanic units, provide information on the age and the time span of sedimentation of the caldera fill. Normal polarity magnetization are found in Snowshoe Mountain Tuff beneath the moat sediments; in detrital-magnetite-bearing graded tuffs near the bottom of the moat fill; in an ash-fall deposit about 200 m stratigraphically about the top of core 2; and in postcaldera lava flows of the Fisher Dacite that overlie the Creede Formation. Normal polarity also characterizes detrital-magnetite-bearing tuff and sandstone unites within the caldera moat rocks that did not undergo severe sulfidic alteration. The combination of initially low magnitude of remanent magnetization and the destructive effects of subsequent diagenetic sulfidization on detrital iron oxides results in a poor paleomagnetic record for the fine-grained sedimentary rocks of the Creede Formation. these fine-grained rocks have either normal or revered polarity magnetizations that are carried by magnetite and/or maghemite. Many more apparent reversals are found that can be accommodated by any geomagnetic polarity time scale over the interval spanned by the ages of the bracketing extrusive rocks. Moreover, opposite polarity magnetization are found in specimens separated by only a few centimeters, without intervening hiatuses, and by specimens in several tuff beds, each of which represents a single depositional event. These polarity changes cannot, therefore, be attributed to detrital remanent magnetization. Many polarity changes are apparently related to chemical remanent magnetizations carried by postdepositional magnetite and maghemite that formed in rocks in which most or all detrital megnetic iron oxide was destroyed. Incipient oxidation of early diagenetic pyrite may have normal polarity Snowshoe Mountain Tuff (26.89 ± 0.0 Ma, 1 δ) and on the normal polarity postcaldera Fisher lava flows (as young as 26.23 ± 0.05 Ma, 1 δ) indicate that deposition of the Creede Formation spanned about 340-660 k.y. The intermittently defined normal polarity magnetization for the caldera-fill sequence, compared with different versions of the geomagnetic polarity time scale, is consistent with the shorter time span.

Colorado↗

USGS2025

Oligocene–Miocene development and evolution of the south Dome Rock Mountains basin, lower Colorado River corridor, Arizona, USA

Sedimentary basins in the Colorado River extensional corridor record large-magnitude Basin and Range extension and younger dextral shear deformation in the evolving Pacific−North America plate boundary. The south Dome Rock Mountains basin is located in west-central Arizona (USA), where the history of basin evolution, style of deformation, and timing of the transition between extension and dextral shear are not well constrained. We integrate new geologic mapping of the south Dome Rock Mountains basin with zircon U-Pb geochronology of six marker beds to characterize the timing of basin evolution and the slip history of the south Dome Rock Mountains normal fault. Structural analysis defines structures consistent with regional extension and younger dextral shear deformation. We use sedimentological and petrological analysis to interpret the depositional environments of three basin sequences. A lower basin sequence consists of fluvial strata deposited in an internally drained intermontane basin from ca. 35 Ma to 24.4 Ma. A sequence of volcanic rocks was emplaced in the basin between 24.4 Ma and 23.3 Ma, before the onset of local extensional faulting. An upper basin sequence of coarse conglomerate and sedimentary breccia was deposited on the hanging wall of a half graben structure after 23.3 Ma and through ca. 12.8 Ma, synchronous with 3−7 km of dip slip on the west-dipping, listric south Dome Rock Mountains fault. The basin was subsequently deformed by dextral shear after 12.8 Ma and before 4.8 Ma. These results document how distributed deformation related to the evolving Pacific−North America plate boundary occurred >100 km from the primary plate boundary.

Arizona, California↗