SEARCH · Search USGS

Results for “Statistical Science”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11Linked to original sources

USGS2012

Science summary in support of Manatee Protection Area (MPA) design in Puerto Rico

The Antillean manatee (Trichechus manatus manatus), a subspecies of the West Indian manatee, is listed as endangered by the US Department of Interior. In accordance with its listing, the U.S. Fish and Wildlife Service’s Caribbean Field Office (USFWS) is mandated to create one or more Manatee Protection Areas (MPAs) for Puerto Rico. Designation of these areas must comply with the legal definition of an MPA’s purpose: to prevent or reduce take of manatees (CFR 50: 44 FR 60964, Oct. 22, 1979). To meet this goal, we pursued two objectives: 1) identify areas which include the specific ecological attributes necessary to support manatee populations, and 2) identify areas where take can be reduced through approved MPA regulatory frameworks. We achieved these objectives through literature review, expert elicitation, and geospatial modeling. This report delivers to USFWS a set of nine potential MPA regions. These regions represent the spatial realization of experts’ hypotheses regarding manatee requirements and threats, and the potential to implement MPA strategies (e.g. watercraft access, speed regulations, signage and boater education). The nine regions are compared based on a number of factors, including their potential to reduce take, quality of the habitat encompassed, and total area. These maps and statistics serve as suitable starting points to select one or more MPA sites, but we recommend that the mapped attributes and threats (i.e., boating activity) of MPAs be ground-truthed to visually confirm the local presence of resources, threats, and manatees before any area is selected. Once established, the effectiveness of MPAs can be monitored and updated through processes of adaptive monitoring and management. Aerial surveys, radio tracking studies, and public surveys are all valuable tools to assess the success of an MPA. Establishing MPAs is a management action that, integrated within the species Recovery Plan, should enhance the conservation of manatees.

Cooperator Science Series↗

USGS2012

Developing accurate survey methods for estimating population sizes and trends of the critically endangered Nihoa Millerbird and Nihoa Finch.

This report describes the results of a comparative study of bird survey methods undertaken for the purpose of improving assessments of the conservation status for the two endemic passerines on the Island of Nihoa—Nihoa Millerbird (Sylviidae: Acrocephalus familiaris kingi ) and Nihoa Finch (Fringilidae: Telespiza ultima ; also referred herein as millerbird and finch)—both listed as endangered under the Federal Endangered Species Act (ESA) and Hawai`i Revised Statutes 195D. The current survey protocol, implemented since 1967, has produced a highly variable range of counts for both the millerbird and finch, making difficult assessments of population size and trend. This report details the analyses of bird survey data collected in 2010 and 2011 in which three survey methods were compared―strip-transect, line-transect, and point-transect sampling―and provides recommendations for improved survey methods and protocols. Funding for this research was provided through a Science Support Partnership grant sponsored jointly by the U.S. Geological Survey (USGS) and the U.S. Fish and Wildlife Service (USFWS). Point-transect surveys indicated that millerbirds were more abundant than shown by the striptransect method, and were estimated at 802 birds in 2010 (95%CI = 652 – 964) and 704 birds in 2011 (95%CI = 579 – 837). Point-transect surveys yielded population estimates with improved precision which will permit trends to be detected in shorter time periods and with greater statistical power than is available from strip-transect survey methods. Mean finch population estimates and associated uncertainty were not markedly different among the three survey methods, but the performance of models used to estimate density and population size are expected to improve as the data from additional surveys are incorporated. Using the pointtransect survey, the mean finch population size was estimated at 2,917 birds in 2010 (95%CI = 2,037 – 3,965) and 2,461 birds in 2011 (95%CI = 1,682 – 3,348). Preliminary testing of the line-transect method in 2011 showed that it would not generate sufficient detections to effectively model bird density, and consequently, relatively precise population size estimates. Both species were fairly evenly distributed across Nihoa and appear to occur in all or nearly all available habitat. The time expended and area traversed by observers was similar among survey methods; however, point-transect surveys do not require that observers walk a straight transect line, thereby allowing them to avoid culturally or biologically sensitive areas and minimize the adverse effects of recurrent travel to any particular area. In general, pointtransect surveys detect more birds than strip-survey methods, thereby improving precision and resulting population size and trend estimation. The method is also better suited for the steep and uneven terrain of Nihoa

Hawaii↗

USGS2000

Microsatellites: Evolutionary and methodological background and empirical applications at individual, population, and phylogenetic levels

The recent proliferation and greater accessibility of molecular genetic markers has led to a growing appreciation of the ecological and evolutionary inferences that can be drawn from molecular characterizations of individuals and populations (Burke et al. 1992, Avise 1994). Different techniques have the ability to target DNA sequences which have different patterns of inheritance, different modes and rates of evolution and, concomitantly, different levels of variation. In the quest for 'the right marker for the right job', microsatellites have been widely embraced as the marker of choice for many empirical genetic studies. The proliferation of microsatellite loci for various species and the voluminous literature compiled in very few years associated with their evolution and use in various research applications, exemplifies their growing importance as a research tool in the biological sciences. The ability to define allelic states based on variation at the nucleotide level has afforded unparalleled opportunities to document the actual mutational process and rates of evolution at individual microsatellite loci. The scrutiny to which these loci have been subjected has resulted in data that raise issues pertaining to assumptions formerly stated, but largely untestable for other marker classes. Indeed this is an active arena for theoretical and empirical work. Given the extensive and ever-increasing literature on various statistical methodologies and cautionary notes regarding the uses of microsatellites, some consideration should be given to the unique characteristics of these loci when determining how and under what conditions they can be employed.

Book chapter↗

USGS2008

GIS technology and models for assessing landslide hazard and risk

Advances in Geographical Information Systems (GIS) technology and the mathematical/statistical tools for modelling and simulation have led to the growing application of quantitative techniques in many areas of the earth sciences. Few disciplines have embraced these developments more enthusiastically than the study of landslide hazards. Because the shape of the land surface plays a fundamental role in landslide processes, much of this new work has been driven by the increasing availability of digital elevation models (DEMs) and the software to manipulate them. As a result, investigators worldwide are devising spatial models to forecast slope instability in efforts to keep landslide hazards from becoming landslide disasters. The methods range from empirical and heuristic to statistical and physically-based. Despite nearly a quarter-century of progress, e.g. since Carrara (1983) , and a veritable “cottage industry” of current DEM-based hazard mapping, many of these spatial predictions either are based on unsuitable data or are not properly modelled.

Geomorphology↗

USGS2004

Fort Collins Science Center: Species and Habitats of Federal Interest

Ecosystem changes directly affect a wide variety of plant and animal species, floral and faunal communities, and groups of species such as amphibians and grassland birds. Appropriate management of public lands plays a crucial role in the conservation and recovery of endangered species and can be a key element in preventing a species from being listed under the Endangered Species Act. The Species and Habitats of Federal Interest Branch of the Fort Collins Science Center (FORT) conducts research on the ecology, habitat requirements, distribution and abundance, population dynamics, and genetics and systematics of many species facing threatened or endangered status or of special concern to resource management agencies. FORT scientists develop reintroduction and restoration techniques, technologies for monitoring populations, and novel methods to analyze data on population trends and habitat requirements. FORT expertise encompasses both traditional and specialized natural resource disciplines within wildlife biology, including population dynamics, animal behavior, plant and community ecology, inventory and monitoring, statistics and computer applications, conservation genetics, stable isotope analysis, and curatorial expertise.

Fact Sheet↗

USGS2015

Tracing the cycling and fate of the explosive 2,4,6-trinitrotoluene in coastal marine systems with a stable isotopic tracer, 15N-[TNT]

2,4,6-Trinitrotoluene (TNT) has been used as a military explosive for over a hundred years. Contamination concerns have arisen as a result of manufacturing and use on a large scale; however, despite decades of work addressing TNT contamination in the environment, its fate in marine ecosystems is not fully resolved. Here we examine the cycling and fate of TNT in the coastal marine systems by spiking a marine mesocosm containing seawater, sediments, and macrobiota with isotopically labeled TNT ( 15 N-[TNT]), simultaneously monitoring removal, transformation, mineralization, sorption, and biological uptake over a period of 16 days. TNT degradation was rapid, and we observed accumulation of reduced transformation products dissolved in the water column and in pore waters, sorbed to sediments and suspended particulate matter (SPM), and in the tissues of macrobiota. Bulk δ 15 N analysis of sediments, SPM, and tissues revealed large quantities of 15 N beyond that accounted for in identifiable derivatives. TNT-derived N was also found in the dissolved inorganic N (DIN) pool. Using multivariate statistical analysis and a 15 N mass balance approach, we identify the major transformation pathways of TNT, including the deamination of reduced TNT derivatives, potentially promoted by sorption to SPM and oxic surface sediments.

Environmental Science & Technology↗

USGS2020

DTSGUI: A python program to process and visualize fiber‐optic distributed temperature sensing data

Fiber‐optic distributed temperature sensing (FO‐DTS) has proven to be a transformative technology for the hydrologic sciences, with application to diverse problems including hyporheic exchange, groundwater/surface‐water interaction, fractured‐rock characterization, and cold regions hydrology. FO‐DTS produces large, complex, and information‐rich datasets. Despite the potential of FO‐DTS, adoption of the technology has been impeded by lack of tools for data processing, analysis, and visualization. New tools are needed to efficiently and fully capitalize on the information content of FO‐DTS datasets. To this end, we present DTSGUI, a public‐domain Python‐based software package for editing, parsing, processing, statistical analysis, georeferencing, and visualization of FO‐DTS data.

Groundwater↗

USGS2020

Hydrologic conditions in Kansas, water year 2019

The U.S. Geological Survey Kansas Water Science Center, in cooperation with Federal, State, and local agencies, maintains a long-term network of hydrologic monitoring stations in the State of Kansas. These include a network of 217 real-time streamgages and 12 real-time reservoir-level monitoring stations in water year 2019. The data and associated analyses from the streamgages and monitoring stations provide a unique overview of hydrologic conditions and help improve the understanding of Kansas’ water resources. Annual assessments of hydrologic conditions are made by comparing statistical analyses of current and past water year data for the period of record. Long-term monitoring of hydrologic conditions in Kansas provides imperative information for many uses including managing water resources and protecting human life and property and promoting agricultural practices, industrial activities, operation of reservoirs , development of infrastructure, ecological assessments, and recreational purposes.

Kansas↗

USGS2016

Water isotope systematics: Improving our palaeoclimate interpretations

The stable isotopes of oxygen and hydrogen, measured in a variety of archives, are widely used proxies in Quaternary Science. Understanding the processes that control δ18O change have long been a focus of research (e.g. Shackleton and Opdyke, 1973; Talbot, 1990 ; Leng, 2006). Both the dynamics of water isotope cycling and the appropriate interpretation of geological water-isotope proxy time series remain subjects of active research and debate. It is clear that achieving a complete understanding of the isotope systematics for any given archive type, and ideally each individual archive, is vital if these palaeo-data are to be used to their full potential, including comparison with climate model experiments of the past. Combining information from modern monitoring and process studies, climate models, and proxy data is crucial for improving our statistical constraints on reconstructions of past climate variability. As climate models increasingly incorporate stable water isotope physics, this common language should aid quantitative comparisons between proxy data and climate model output. Water-isotope palaeoclimate data provide crucial metrics for validating GCMs, whereas GCMs provide a tool for exploring the climate variability dominating signals in the proxy data. Several of the studies in this set of papers highlight how collaborations between palaeoclimate experimentalists and modelers may serve to expand the usefulness of palaeoclimate data for climate prediction in future work. This collection of papers follows the session on Water Isotope Systematics held at the 2013 AGU Fall Meeting in San Francisco. Papers in that session, the breadth of which are represented here, discussed such issues as; understanding sub-GNIP scale (Global Network for Isotopes in Precipitation, (IAEA/WMO, 2006)) variability in isotopes in precipitation from different regions, detailed examination of the transfer of isotope signals from precipitation to geological archives, and the implications of advances in understanding in these areas for the interpretation of palaeo records and proxy data – climate model comparison. Here, we briefly review these areas of research, and discuss challenges for the water isotope community in improving our ability to partition climate vs. auxiliary signals in palaeoclimate data.

Quaternary Science Reviews↗

USGS2025

Technical note: A low-cost approach to monitoring relative streamflow dynamics in small headwater streams using time lapse imagery and a deep learning model

Despite their ubiquity and importance as freshwater habitat, small headwater streams are under-monitored by existing stream gage networks. To address this gap, we describe a low-cost, non-contact, and low-effort method that enables organizations to monitor relative streamflow dynamics in small headwater streams. The method uses a camera to capture repeat images of the stream from a fixed position. A person then annotates pairs of images, in each case indicating which image has more apparent streamflow or indicating equal flow if no difference is discernible. A deep learning modeling framework called streamflow rank estimation (SRE) is then trained on the annotated image pairs and applied to rank all images from highest to lowest apparent streamflow. From this result a relative hydrograph can be derived. We found that our modeled relative hydrograph dynamics matched the observed hydrograph dynamics well for 11 cameras at 8 streamflow sites in western Massachusetts. Higher performance was observed during the annotation period (median Kendall's Tau rank correlation of 0.75, with a range of 0.6–0.83) than after it (median Kendall's Tau of 0.59, with range 0.34–0.74). We found that annotation performance was generally consistent across the 11 camera sites and 2 individual annotators and was positively correlated with streamflow variability at a site. A scaling simulation determined that model performance improvements were limited after 1000 annotation pairs. Our model's estimates of relative flow, while not equivalent to absolute flow, may still be useful for many applications, such as ecological modeling and calculating event-based hydrological statistics (e.g., the number of out-of-bank floods). We anticipate that this method will be a valuable tool to extend existing stream monitoring networks and provide new insights on dynamic headwater systems.

Massachusetts↗

USGS2004

Evaluation of cage micro-environment of mice housed on various types of bedding materials

A variety of environmental factors can affect the outcomes of studies using laboratory rodents. One such factor is bedding. Several new bedding materials and processing methods have been introduced to the market in recent years, but there are few reports of their performance. In the studies reported here, we have assessed the cage micro-environment (in-cage ammonia levels, temperature, and humidity) of mice housed on various kinds of bedding and their combinations. We also compared results for bedding supplied as Nestpaks versus loose bedding. We studied C57BL/6J mice (commonly used) and NOD/LtJ mice (heavy soilers) that were maintained, except in one study, in static duplex cages. In general, we observed little effect of bedding type on in-cage temperature or humidity; however, there was considerable variation in ammonia concentrations. The lowest ammonia concentrations occurred in cages housing mice on hardwood bedding or a mixture of corncob and alpha cellulose. In one experiment comparing the micro-environments of NOD/LtJ male mice housed on woodpulp fiber bedding in static versus ventilated caging, we showed a statistically significant decrease in ammonia concentrations in ventilated cages. Therefore, our data show that bedding type affects the micro-environment in static cages and that effects may differ for ventilated cages, which are being used in vivaria with increasing frequency.

Contemporary Topics in Laboratory Animal Science↗

USGS2015

Validation of streamflow measurements made with M9 and RiverRay acoustic Doppler current profilers

The U.S. Geological Survey (USGS) Office of Surface Water (OSW) previously validated the use of Teledyne RD Instruments (TRDI) Rio Grande (in 2007), StreamPro (in 2006), and Broadband (in 1996) acoustic Doppler current profilers (ADCPs) for streamflow (discharge) measurements made by the USGS. Two new ADCPs, the SonTek M9 and the TRDI RiverRay, were first used in the USGS Water Mission Area programs in 2009. Since 2009, the OSW and USGS Water Science Centers (WSCs) have been conducting field measurements as part of their stream-gaging program using these ADCPs. The purpose of this paper is to document the results of USGS OSW analyses for validation of M9 and RiverRay ADCP streamflow measurements. The OSW required each participating WSC to make comparison measurements over the range of operating conditions in which the instruments were used until sufficient measurements were available. The performance of these ADCPs was evaluated for validation and to identify any present and potential problems. Statistical analyses of streamflow measurements indicate that measurements made with the SonTek M9 ADCP using firmware 2.00–3.00 or the TRDI RiverRay ADCP using firmware 44.12–44.15 are unbiased, and therefore, can continue to be used to make streamflow measurements in the USGS stream-gaging program. However, for the M9 ADCP, there are some important issues to be considered in making future measurements. Possible future work may include additional validation of streamflow measurements made with these instruments from other locations in the United States and measurement validation using updated firmware and software.

Journal of Hydraulic Engineering↗

USGS2015

Calculating salt loads to Great Salt Lake and the associated uncertainties for water year 2013; updating a 48 year old standard

Effective management of surface waters requires a robust understanding of spatiotemporal constituent loadings from upstream sources and the uncertainty associated with these estimates. We compared the total dissolved solids loading into the Great Salt Lake (GSL) for water year 2013 with estimates of previously sampled periods in the early 1960s.We also provide updated results on GSL loading, quantitatively bounded by sampling uncertainties, which are useful for current and future management efforts. Our statistical loading results were more accurate than those from simple regression models. Our results indicate that TDS loading to the GSL in water year 2013 was 14.6 million metric tons with uncertainty ranging from 2.8 to 46.3 million metric tons, which varies greatly from previous regression estimates for water year 1964 of 2.7 million metric tons. Results also indicate that locations with increased sampling frequency are correlated with decreasing confidence intervals. Because time is incorporated into the LOADEST models, discrepancies are largely expected to be a function of temporally lagged salt storage delivery to the GSL associated with terrestrial and in-stream processes. By incorporating temporally variable estimates and statistically derived uncertainty of these estimates,we have provided quantifiable variability in the annual estimates of dissolved solids loading into the GSL. Further, our results support the need for increased monitoring of dissolved solids loading into saline lakes like the GSL by demonstrating the uncertainty associated with different levels of sampling frequency.

Utah↗

USGS2005

Concentrations of cadmium, lead, and zinc in fish from mining-influenced waters of northeastern Oklahoma: Sampling of blood, carcass, and liver for aquatic biomonitoring

The Tri-States Mining District (TSMD) of Missouri (MO), Kansas (KS), and Oklahoma (OK), USA, was mined for lead (Pb) and zinc (Zn) for more than a century. Mining ceased more than 30 years ago, but wastes remain widely distributed in the region, and there is evidence of surface- and groundwater contamination in the Spring River-Neosho River (SR-NR) system of northeastern OK. In October 2001, we collected a total of 74 fish from six locations in the SR-NR system that included common carp (Cyprinus carpio), channel- and flathead catfish (Ictalurus punctatus and Pylodictis olivaris), largemouth- and spotted bass (Micropterus salmoides and Micropterus punctulatus), and white crappie (Pomoxis annularis). We obtained additional fish from locations in MO that included three reference sites and one site that served as a "positive control" (heavily contaminated by Pb). Blood, carcass (headed, eviscerated, and scaled) and liver (carp only) samples were analyzed for cadmium (Cd), Pb, and Zn. Our objectives were to assess the degree to which fish from the OK portion of the SR-NR system are contaminated by these elements and to evaluate fish blood sampling for biomonitoring. Concentrations of Cd and Pb in carp and catfish from OK sites were elevated and Pb concentrations of some approached those of the highly contaminated site in MO, but concentrations in bass and crappie were relatively low. For Zn, correlations were weak among concentrations in the three tissues and none of the samples appeared to reflect site contamination. Variability was high for Cd in all three tissues of carp; differences between sites were statistically significant (p < 0.05) only for blood even though mean liver concentrations were at least 100-fold greater than those in blood. Blood concentrations of Cd and Pb were positively correlated (r 2 = 0.49 to 0.84) with the concentration of the same element in carp and catfish carcasses or in carp livers, and the corresponding multiple regression models were highly significant (p < 0.001). Our data indicate that potentially nonlethal blood sampling can be useful for monitoring of selected metals in carp, catfish, and perhaps other fishes. ?? 2005 Springer Science+Business Media, Inc.

Archives of Environmental Contamination and Toxico↗

USGS1992

Sampling design for spatially distributed hydrogeologic and environmental processes

A methodology for the design of sampling networks over space is proposed. The methodology is based on spatial random field representations of nonhomogeneous natural processes, and on optimal spatial estimation techniques. One of the most important results of random field theory for physical sciences is its rationalization of correlations in spatial variability of natural processes. This correlation is extremely important both for interpreting spatially distributed observations and for predictive performance. The extent of site sampling and the types of data to be collected will depend on the relationship of subsurface variability to predictive uncertainty. While hypothesis formulation and initial identification of spatial variability characteristics are based on scientific understanding (such as knowledge of the physics of the underlying phenomena, geological interpretations, intuition and experience), the support offered by field data is statistically modelled. This model is not limited by the geometric nature of sampling and covers a wide range in subsurface uncertainties. A factorization scheme of the sampling error variance is derived, which possesses certain atttactive properties allowing significant savings in computations. By means of this scheme, a practical sampling design procedure providing suitable indices of the sampling error variance is established. These indices can be used by way of multiobjective decision criteria to obtain the best sampling strategy. Neither the actual implementation of the in-situ sampling nor the solution of the large spatial estimation systems of equations are necessary. The required values of the accuracy parameters involved in the network design are derived using reference charts (readily available for various combinations of data configurations and spatial variability parameters) and certain simple yet accurate analytical formulas. Insight is gained by applying the proposed sampling procedure to realistic examples related to sampling problems in two dimensions.

Advances in Water Resources↗

USGS2006

Absolute calibration accuracy of L4 TM and L5 TM sensor image pairs

The Landsat suite of satellites has collected the longest continuous archive of multispectral data of any land-observing space program. From the Landsat program's inception in 1972 to the present, the Earth science user community has benefited from a historical record of remotely sensed data. However, little attention has been paid to ensuring that the data are calibrated and comparable from mission to mission, Launched in 1982 and 1984 respectively, the Landsat 4 (L4) and Landsat 5 (L5) Thematic Mappers (TM) are the backbone of an extensive archive of moderate resolution Earth imagery. To evaluate the "current" absolute accuracy of these two sensors, image pairs from the L5 TM and L4 TM sensors were compared. The approach involves comparing image statistics derived from large common areas observed eight days apart by the two sensors. The average percent differences in reflectance estimates obtained from the L4 TM agree with those from the L5 TM to within 15 percent. Additional work to characterize the absolute differences between the two sensors over the entire mission is in progress.

Conference Paper↗

USGS2010

Social values for ecosystem services (SolVES): A GIS application for assessing, mapping, and quantifying the social values of ecosystem services-Documentation and user manual, version 1.0

In response to the need for incorporating quantified and spatially explicit measures of social values into ecosystem services assessments, the Rocky Mountain Geographic Science Center, in collaboration with Colorado State University, has developed a geographic information system application, Social Values for Ecosystem Services (SolVES). SolVES can be used to assess, map, and quantify the perceived social values of ecosystem services. SolVES derives a quantitative social values metric, the Value Index, from a combination of spatial and nonspatial responses to public attitude and preference surveys. SolVES also generates landscape metrics, such as average elevation and distance to water, calculated from spatial data layers describing the underlying physical environment. Using kernel density calculations and zonal statistics, SolVES derives and maps the 10-point Value Index and reports landscape metrics associated with each index value for social value types such as aesthetics, biodiversity, and recreation. This can be repeated for various survey subgroups as distinguished by their attitudes and preferences regarding public uses of the forests such as motorized recreation and logging for fuels reduction. The Value Index provides a basis of comparison within and among survey subgroups to consider the effect of social contexts on the valuation of ecosystem services. SolVES includes regression coefficients linking the predicted value (the Value Index) to landscape metrics. These coefficients are used to generate predicted social value maps using value transfer techniques for areas where primary survey data are not available. SolVES was developed, and will continue to be enhanced through future versions, as a public domain tool to enable decision makers and researchers to map the social values of ecosystem services and to facilitate discussions among diverse stakeholders regarding tradeoffs between different ecosystem services in a variety of physical and social contexts.

Open-File Report↗

USGS2016

Modeling the effects of land cover and use on landscape capability for urban ungulate populations

Expanding ungulate populations are causing concerns for wildlife professionals and residents in many urban areas worldwide. Nowhere is the phenomenon more apparent than in the eastern US, where urban white-tailed deer (Odocoileus virginianus) populations are increasing. Most habitat suitability models for deer have been developed in rural areas and across large (>1000 km2) spatial extents. Only recently have we begun to understand the factors that contribute to space use by deer over much smaller spatial extents. In this study, we explore the concepts, terminology, methodology and state-of-the-science in wildlife abundance modeling as applied to overabundant deer populations across heterogeneous urban landscapes. We used classified, high-resolution digital orthoimagery to extract landscape characteristics in several urban areas of upstate New York. In addition, we assessed deer abundance and distribution in 1-km2 blocks across each study area from either aerial surveys or ground-based distance sampling. We recorded the number of detections in each block and used binomial mixture models to explore important relationships between abundance and key landscape features. Finally, we cross-validated statistical models of abundance and compared covariate relationships across study sites. Study areas were characterized along a gradient of urbanization based on the proportions of impervious surfaces and natural vegetation which, based on the best-supported models, also distinguished blocks potentially occupied by deer. Models performed better at identifying occurrence of deer and worse at predicting abundance in cross-validation comparisons. We attribute poor predictive performance to differences in deer population trajectories over time. The proportion of impervious surfaces often yielded better predictions of abundance and occurrence than did the proportion of natural vegetation, which we attribute to a lack of certain land cover classes during cold and snowy winters. Merits and limitations of our approach to habitat suitability modeling are discussed in detail.

Book chapter↗