SEARCH · Search USGS

Results for “Rocky Mountain Geology”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11Linked to original sources

USGS2025

The 3D Elevation Program—Supporting the economy of Massachusetts

Introduction Massachusetts extends from the mountains of the Appalachian system in the west of the State to the sandy beaches and rocky shorelines of the Atlantic coast in the east. Inland topographic data support a wide range of important activities, including geologic mapping, transportation planning, forest and wildlife management, quantifying ecological services, water supply protection, commonwealth-wide infrastructure planning, local site planning, and flood-plain management. Nearshore bathymetry can be used to support coastal portions of the Commonwealth by addressing the combined threats of ocean warming, strong storm surge, and rising sea levels. The maintenance and (or) expansion of Massachusetts ports (for instance, Boston, New Bedford) and Cape Cod sediment management depends upon the accurate mapping of bathymetry and the frequent influx of sediment and redeposition. Critical applications that address the broad range of requirements depend on light detection and ranging (lidar) data that provide a highly detailed three-dimensional (3D) model of the Earth’s surface and aboveground features. The 3D Elevation Program (3DEP) is managed by the U.S. Geological Survey (USGS) in partnership with Federal, State, Tribal, U.S. territorial, and local agencies to acquire consistent lidar coverage at quality level 2 or better to meet the many needs of the Nation and Massachusetts. The status of available and in-progress 3DEP baseline lidar data in Massachusetts is shown in figure 1. 3DEP baseline lidar data include quality level 2 or better, 1-meter or better digital elevation models, and lidar point clouds, and must meet the Lidar Base Specification version 1.2 ( https://www.usgs.gov/3dep/lidarspec ) or newer requirements. The National Enhanced Elevation Assessment identified user requirements and conservatively estimated that availability of lidar data would result in at least $1.23 million in new benefits annually to Massachusetts. The top 10 Massachusetts business uses for 3D elevation data, which are based on the estimated annual conservative benefits of 3DEP, are shown in table 2.

Massachusetts↗

USGS2015

Chronostratigraphic cross section of Cretaceous formations in western Montana, western Wyoming, eastern Utah, northeastern Arizona, and northwestern New Mexico, U.S.A.

The chronostratigraphic cross section presented herein is a contribution to the Western Interior Cretaceous (WIK) project of the Global Sedimentary Geology Program. It portrays the Cretaceous formations at 13 localities in a south-trending transect from northwestern Montana through western Wyoming, eastern Utah, and northeastern Arizona, to northwestern New Mexico. The localities are in the Rocky Mountains and on the Colorado Plateau and contain strata that were deposited along the western margin of the Cretaceous Interior Seaway of North America. These strata are marine and nonmarine, mainly siliceous and calcareous, and of Aptian through Maastrichtian ages. They range in thickness from nearly 19,000 feet (ft) in southwestern Montana to about 1,500 ft thick in northeastern Arizona and northwestern New Mexico. Cretaceous formations in western Montana, western Wyoming, and eastern Utah disconformably overlie Jurassic rocks and locally include beds of either Aptian and Albian ages or Albian age. The Aptian beds consist of various lithologies of nonmarine origin. Albian beds consist of various nonmarine and marine lithologies. The Lower Cretaceous strata range in thickness from 4,300 ft in northern Utah to 180 ft in southern Utah and are absent at localities in Arizona and New Mexico. Upper Cretaceous strata at most localities in the transect include beds of Cenomanian through Maastrichtian ages, although at five of the localities in Montana, Wyoming, Utah, Arizona, and New Mexico, younger strata are missing. Beds of Cenomanian, Turonian, Coniacian, Santonian, and Campanian ages in the region are siliceous, calcareous, or bentonitic and were deposited in marine and nonmarine environments. In the following Maastrichtian, siliceous lithologies accumulated in nonmarine environments. Thicknesses of the Upper Cretaceous strata range from more than 17,000 ft in southwestern Montana to nearly 6,000 ft in northwestern New Mexico. In this transect for time-stratigraphic units of the Cretaceous, lateral changes in lithologies, regional differences in thicknesses, and the abundance of associated disconformities possibly reflect local and regional tectonic events. Examples of evidence of those events follow: (1) Disconformities and the absence of strata of lowest Cretaceous age in western Montana, western Wyoming, and northern Utah indicate significant tectonism and erosion probably during the Late Jurassic and earliest Cretaceous; ( 2) stages of Upper Cretaceous deposition in the transect display major lateral changes in thickness, which probably reflect regional and local tectonism.

Arizona, Montana, New Mexico, Utah, Wyoming↗

USGS1978

Cartographic research 1977

Two major subjects of the current research of the Topographic Division as reported here are related to policy decisions affecting the National Mapping Program of the Geological Survey. The adoption of a metric mapping policy has resulted in new cartographic products with associated changes in map design that require new looks in graphics and new equipment. The increasing use of digitized cartographic information has led to developments in data acquisition, processing, and storage and consequent changes in equipment and techniques. This report summarizes the activities in cartographic research and development for the 12-month period ending June 1977 and covers work done at the several facilities of the Topographic Division: the Western Mapping Center at Menlo Park, Calif., the Rocky Mountain Mapping Center at Denver, Colo., the Mid-Continent Mapping Center at Rolla, Mo., and the Eastern Mapping Center, the Special Mapping Center, the Office of Plans and Program Development, and the Office of Research and Technical Standards all at Reston, Va.

Report↗

USGS2009

Methods of Mmax Estimation East of the Rocky Mountains

Several methods have been used to estimate the magnitude of the largest possible earthquake (Mmax) in parts of the Central and Eastern United States and adjacent Canada (CEUSAC). Each method has pros and cons. The largest observed earthquake in a specified area provides an unarguable lower bound on Mmax in the area. Beyond that, all methods are undermined by the enigmatic nature of geologic controls on the propagation of large CEUSAC ruptures. Short historical-seismicity records decrease the defensibility of several methods that are based on characteristics of small areas in most of CEUSAC. Methods that use global tectonic analogs of CEUSAC encounter uncertainties in understanding what 'analog' means. Five of the methods produce results that are inconsistent with paleoseismic findings from CEUSAC seismic zones or individual active faults.

Open-File Report↗

USGS2008

Eruptive and noneruptive calderas, northeastern San Juan Mountains, Colorado: Where did the ignimbrites come from?

The northeastern San Juan Mountains, the least studied portion of this well-known segment of the Southern Rocky Mountains Volcanic Field are the site of several newly identified and reinterpreted ignimbrite calderas. These calderas document some unique eruptive features not described before from large volcanic systems elsewhere, as based on recent mapping, petrologic data, and a large array of newly determined high-precision, laser-fusion 40 Ar/ 39 Ar ages (140 samples). Tightly grouped sanidine ages document exceptionally brief durations of 50–100 k.y. or less for individual Oligocene caldera cycles; biotite ages are more variable and commonly as much as several hundred k.y. older than sanidine from the same volcanic unit. A previously unknown ignimbrite caldera at North Pass, along the Continental Divide in the Cochetopa Hills, was the source of the newly distinguished 32.25-Ma Saguache Creek Tuff (~400–500 km 3 ). This regionally distinctive crystal-poor alkalic rhyolite helps fill an apparent gap in the southwestward migration from older explosive activity, from calderas along the N-S Sawatch locus in central Colorado (youngest, Bonanza Tuff at 33.2 Ma), to the culmination of Tertiary volcanism in the San Juan region, where large-volume ignimbrite eruptions started at ca. 29.5 Ma and peaked with the enormous Fish Canyon Tuff (5000 km 3 ) at 28.0 Ma. The entire North Pass cycle, including caldera-forming Saguache Creek Tuff, thick caldera-filling lavas, and a smaller volume late tuff sheet, is tightly bracketed at 32.25–32.17 Ma. No large ignimbrites were erupted in the interval 32–29 Ma, but a previously unmapped cluster of dacite-rhyolite lava flows and small tuffs, areally associated with a newly recognized intermediate-composition intrusion 5 × 10 km across (largest subvolcanic intrusion in San Juan region) centered 15 km north of the North Pass caldera, marks a near- caldera-size silicic system active at 29.8 Ma. In contrast to the completely filled North Pass caldera that has little surviving topographic expression, no voluminous tuffs vented directly from the adjacent Cochetopa Park caldera, which is morphologically beautifully preserved. Instead, Cochetopa Park subsided passively as the >500 km 3 Nelson Mountain Tuff vented at 26.9 Ma from an “underfit” caldera (youngest of the San Luis complex) 30 km to the SW. Three separate regional ignimbrites were erupted sequentially from San Luis calderas within an interval of less than 50–100 k.y., a more rapid recurrence rate for large explosive eruptions than previously documented elsewhere. In eruptive processes, volcanic compositions, areal extent, duration of activity, and magmatic production rates and volumes, the Southern Rocky Mountains Volcanic Field represents present-day erosional remnants of a composite volcanic field, comparable to younger ignimbrite terranes of the Central Andes.

Colorado↗

USGS2025

Systematic approach to prioritize wells for effective groundwater monitoring and management in the Arkansas Headwaters Basin, Colorado, USA

Study region The Arkansas Headwaters Basin, an intermountain basin in the Southern Rocky Mountains of North America. Study focus Our specific focus is choosing a set of wells to support a possible future regional groundwater-surface water model that would support water management. We present a three-step process using multiple criteria to score, predict, and choose prioritized wells that capture the full distribution of data including extremes. The three-step process provides accessible visualizations, fiscally efficient well prioritization, and screening useful for subsequent groundwater modeling. The novelty of the proposed methodology is the systematic approach integrating a scoring and a predictive approach to support a selection path. The systematic approach may be broadly adapted for other basins. New hydrological insights for the region Understanding regional hydrology hinges on efficient collection of hydrologic data that captures the relevant dynamics including extremes. The present study, a case study for a particular basin in the Southern Rocky Mountains, is the first use of a scripted (R software) strategy to select an economical and representative set of monitoring wells. Our findings suggest caution when using proximity as a proxy for correlation, because proximal wells in the same geologic formation and similar depths are not always correlated. In the Arkansas Headwaters Basin, subsurface geology may be less influential on groundwater elevations than broader hydrologic influences, such as regional drought.

Colorado↗

USGS1999

High-Resolution Land Use and Land Cover Mapping

As the Nation?s population grows, quantifying, monitoring, and managing land use becomes increasingly important. The U.S. Geological Survey (USGS) has a long heritage of leadership and innovation in land use and land cover (LULC) mapping that has been the model both nationally and internationally for over 20 years. At present, the USGS is producing high-resolution LULC data for several watershed and urban areas within the United States. This high-resolution LULC mapping is part of an ongoing USGS Land Cover Characterization Program (LCCP). The four components of the LCCP are global (1:2,000,000-scale), national (1:100,000-scale), urban (1:24,000-scale), and special projects (various scales and time periods). Within the urban and special project components, the USGS Rocky Mountain Mapping Center (RMMC) is collecting historical as well as contemporary high-resolution LULC data. RMMC?s high-resolution LULC mapping builds on the heritage and success of previous USGS LULC programs and provides LULC information to meet user requirements.

Fact Sheet↗

USGS2018

Processes and facies relationships in a Lower(?) Devonian rocky shoreline depositional environment, East Lime Creek Conglomerate, south‐western Colorado, USA

Rocky shorelines are relatively common features along modern coastlines, but few have been recognized in the geological record. The hard substrates of rocky shorelines telescope the width of offshore marine environments, thus the diagnostic deposits observed in such settings today have a low preservation potential due to small accommodation space and high‐energy conditions. This study recognized previously overlooked, laterally extensive Lower(?) Devonian rocky shoreline deposits in the San Juan Mountains of south‐western Colorado. The newly defined lithostratigraphic unit, the East Lime Creek Conglomerate (ELCC), is 0–23 m thick, unconformably overlying Proterozoic crystalline rocks and unconformably overlain by the Upper Devonian Ignacio Formation and/or Elbert Formation. The unit mostly consists of clast‐supported cobble‐boulder conglomerate with rounded quartzite clasts up to 1.4 m in length interbedded with thin sandstone layers and lenses. Sandstones in the ELCC are distinguished from unconformably overlying Upper Devonian sedimentary rocks because they have sericite cements. Most importantly, there are buttressing relationships between the ELCC and underlying Proterozoic crystalline rocks interpreted as palaeo‐sea cliffs, palaeo‐wave‐cut platforms and palaeo‐tombolos. A proposed rocky shoreline facies model includes headlands with upper shoreface‐beachface tabular cobble‐boulder gravels sourced from rock fall talus, nearshore subaqueous debris‐flow deposits and intervening pocket beaches with imbricated, stratified pebble‐cobble gravel sheets. Palaeocurrent data ( n = 338) from clast long‐axis orientations, imbrication and cross‐bedding indicate south‐to‐north transport roughly onshore‐offshore to a coastline consisting of alternating rocky headlands and pocket beaches. This Lower(?) Devonian unit documents a previously unrecognized episode in the geological history of south‐western Colorado.

Colorado↗

USGS1903

Contributions to the geology of Washington

Central Washington includes a part of two great topographic provinces; the great plain of the Columbia and the Cascade Range. The former, in its position and general desert-like character, suggests at once a resemblance to the Great Basin of Utah and Nevada; and the vastness of the desert plain is emphasized by the snowy peaks of the Cascades along its western border. These provinces are not to be regarded as unconnected in their geologic history, however great the contrast in their general features. The intermediate zone between the great plain on the east and the mountain range on the west is a strategic point for the investigation of the geologic structure and history and the interpretation of the present topography of both provinces. On the extensive basalt-covered plain monotony wearies the traveler, while on the rocky peaks of the Cascades the complexity taxes the powers of the observer.

Washington↗

USGS2004

Strontium isotope geochemistry of groundwater in the central part of the Dakota (Great Plains) aquifer, USA

The Dakota aquifer of the central and eastern Great Plains of the United States is an important source of water for municipal supplies, irrigation and industrial use. Although the regional flow system can be characterized generally as east to northeasterly from the Rocky Mountains towards the Missouri River, locally the flow systems are hydrologically complex. This study uses Sr isotopic data from groundwater and leached aquifer samples to document the complex subsystems within the Dakota aquifer in Nebraska and Kansas. The interaction of groundwater with the geologic material through which it flows has created spatial patterns in the isotopic measurements that are related to: long-term water-rock interaction, during which varying degrees of isotopic equilibrium between water and rock has been achieved; and the alteration of NaCl fluids by water-rock interaction. Specifically, Sr isotopic data distinguish brines from Kansas and western Nebraska from those in eastern Nebraska: the former are interpreted to reflect interaction with Permian rocks, whereas the latter record interaction with Pennsylvanian rocks. The Sr isotopic composition of groundwater from other parts of Nebraska and Kansas are a function of the dynamic interaction between groundwater and unlithified sediments (e.g., glacial till and loess), followed by interaction with oxidized and unoxidized sediments within the Dakota Formation. This study illustrates the power of combining Sr chemistry with more conventional geochemical data to obtain a more complete understanding of groundwater flow systems within regional aquifer systems where extensive monitoring networks do not exist. ?? 2003 Elsevier Ltd. All rights reserved.

Applied Geochemistry↗

USGS1960

Geology and ground-water resources of Platte County, Wyoming, with a section on Chemical quality of the water

Platte County, Wyo., has an area of 2,114 square miles and, in 1950, had a population of 7,925; it lies within parts of two major physiographic provinces, the northern extension of the Southern Rocky Mountains and the northwestern part of the Great Plains. The Laramie Range and related structures lie along the western margin of the county and constitute the eastern limit of the Rocky Mountain Front Range. The High Plains section of the Great Plains province extends eastward from the Laramie Range over the remainder of the county. The original surface of the High Plains has been deeply eroded, and in the northeastern part of the county it is broken by the broad uplifted structural platform of the Hartville Hills. The North Platte River and its tributaries have entrenched their channels as much as 1,000 feet into the plains, leaving wide, very flat intervalley areas that are interrupted by a few isolated buttes and outlying ridges. Well-defined terraces, locally called the Wheatland Flats, have been formed in central Platte County. The climate is semiarid, the average annual precipitation being about 15 inches. Farming and stockraising are the principal occupations in the county. Most of the rocks exposed in the county are of Tertiary and Quaternary age, although rocks as old as Precambrian crop out locally. The Arikaree and Brule formations and younger deposits, including Tertiary ( ?) deposits (undifferentiated) and terrace, flood-plain, and other alluvial deposits, underlie more than two-thirds of the county. Mesozoic, Paleozoic, and Precambrian rocks crop out in the other third and underlie the younger rocks at great depths elsewhere. Small supplies of ground water adequate for domestic and stock use can be obtained from shallow wells in the Casper, Hartville, Cloverly, Brule, and Arikaree formations and in the terrace and flood-plain deposits. Small to moderate amounts of ground water can be obtained from the 'Converse sand' of the Hartville formation. Several flowing wells obtain water from this sand near Glendo. Moderate to large supplies of ground water adequate for small-scale irrigation or industrial uses or for public supply can be obtained from properly constructed wells penetrating thick saturated sections of the Arikaree formation and from the terrace and flood-plain deposits. Large supplies of ground water can be obtained from the flood-plain deposits of the North Platte River near Guernsey, where wells commonly yield more than 1,000 gpm (gallons per minute). The aquifers with greatest potential for additional groundwater development in Platte County, in decreasing order of importance, are the flood-plain deposits along the North Platte River and its tributaries, the Arikaree formation and terrace deposits in parts of the Wheatland Flats, and the 'Converse sand' in the general vicinity of Glendo.

Water Supply Paper↗

USGS2002

Geologic map of the Eagle Quadrangle, Eagle County, Colorado

The Eagle quadrangle covers an area that straddles the Eagle River and Interstate 70 (I-70) and it includes the town of Eagle, Colo., which is located in the southwestern part of the quadrangle, just south of I-70 and the Eagle River, about 37 km west of Vail, Colo. The map area is part of the I-70 urban corridor, which is experiencing rapid and escalating urban growth. Geologic mapping along this corridor is needed for ongoing land-use planning. A variety of rocks and deposits characterize the map area and areas nearby. Sedimentary rocks present in the map area range in age from Pennsylvanian rocks, which were deposited in the ancestral Eagle basin during the formation of the ancestral Rocky Mountains, to Late Cretaceous rocks that were deposited just prior to the formation of the present Rocky Mountains. The Pennsylvanian rocks in the map area include a thick sequence of evaporitic rocks (Eagle Valley Evaporite). These evaporitic rocks are commonly complexly folded throughout the southern part of the quadrangle where they are exposed. In general, in the central and northern parts of the quadrangle, the sedimentary rocks overlying the evaporite dip gently to moderately northward. Consequently, the youngest sedimentary rocks (Late Cretaceous rocks) are exposed dipping gently to the north in the northern part of the quadrangle; landslide complexes are widespread along the northerly dipping, dip slopes in shaly rocks of the Cretaceous sequence in the northeastern part of the map area. During the Early Miocene, basaltic volcanism formed extensive basaltic flows that mantled the previously deformed and eroded sedimentary rocks. Erosional remnants of the basaltic flows are preserved in the southeastern, west-central, and north-central parts of the map area. Some of these basaltic flows are faulted and downdropped in a manner that suggests they were downdropped in areas where large volumes of the underlying evaporitic rocks were removed from the subsurface, beneath the basaltic rocks, by dissolution or flowage of the evaporite in the subsurface. Quaternary and late Tertiary(?) surficial deposits in the map area consist mainly of Quaternary alluvium and colluvium, late and middle Pleistocene terrace gravels of the Eagle River, Miocene(?) gravel remnants of the ancestral Eagle River and its tributaries, and Pleistocene to recent mass movement deposits that include landslides and debris flows. Potential geologic hazards in the map area include landslides, debris flows, rockfalls, local flooding, ground subsidence, and expansive and corrosive soils.

Colorado↗

USGS2022

The 180-km-long Meers-Willow Fault System in the Southern Oklahoma Aulacogen: A potential U.S. mid-continent seismic hazard

We integrate new high-resolution aeromagnetic data with seismic reflection data, well logs, satellite remote sensing, and field observations to provide a regional view of buried and exposed structures in the Southern Oklahoma Aulacogen and to assess their potential for future seismicity. Trends ranging from NW−SE to ∼E−W, peaking at 330° ± 4.5° and 280° ± 3°, dominate the magnetic lineaments of the Southern Oklahoma Aulacogen, reflecting basement contacts, dikes, and faults, including a previously unmapped ∼100-km-long basement fault, which is herein referred to as the Willow fault. The fault disrupts, truncates, and vertically offsets basement-related seismic reflectors and overlying Paleozoic strata up through the Permian reflectors. Surface deformation along the trend includes fault-parallel monoclinal folds, pervasive fractures, and fracture-hosted mud dikes in Permian evaporite units. These structures indicate a Permian or post-Permian reactivation of the fault. Along-strike, the Willow fault connects to the NW-trending, seismically active Meers Fault to comprise the ∼180-km-long Meers-Willow fault system, which potentially represents a major seismic hazard along the Southern Oklahoma Aulacogen. Fault slip potential analyses of the mapped potential fault traces show that seismic hazards are elevated where faults have steeper dips. Given some uncertainty in the regional stress state, we also show that hazards along the NW−SE to E−W trending faults vary considerably within the uncertainty range. We propose that the Meers-Willow fault system originated as a Cambrian aulacogen-scale, basement-rooted fault that was later reactivated as a left-lateral strike-slip fault (with ∼40 km displacement) during the late Paleozoic Ancestral Rocky Mountain orogeny, highlighting that lateral offset accommodated a major component of deformation during the orogen.

Oklahoma↗

USGS2001

Forces shaping future U.S. coal production and use

More than half of the electricity in the United States is generated by coal-fired powerplants. U.S. coal producers sell almost 90 percent of their product for electricity generation, and so, the future of the U.S. coal industry will be determined by the future of coal-fired electricity-generation plants. The U.S. Geological Survey (USGS) is completing a National Coal Resource Assessment (NCRA) of five major coal-producing regions of the United States (fig. 1): (1) the Appalachian Basin, (2) the Illinois Basin, (3) the Gulf Coast, (4) the Colorado Plateau, and (5) the Northern Rocky Mountains and Great Plains. The Powder River and Williston Basins are the principal producing areas of the Northern Rocky Mountains and Great Plains region.

Fact Sheet↗

USGS1993

Regional aquifers in Kansas, Nebraska, and parts of Arkansas, Colorado, Missouri, New Mexico, Oklahoma, South Dakota, Texas, and Wyoming: Geohydrologic framework

Regional aquifers are described within a 370,000-square-mile area extending from the foothills of the Rocky Mountains in Colorado to the Missouri and Mississippi Rivers in eastern Nebraska and Missouri, and from South Dakota to the Ouachita, Arbuckle, and Wichita Mountains of Arkansas and Oklahoma. The present geohydrologic framework of aquifers and confining units in this area is controlled by topography, geologic structures, and hydraulic properties. All of these characteristics are the result of past geologic and hydrologic processes. From the end of the Precambrian to Late Cambrian time, the area was above sea level, and an uneven erosional surface had developed on the fractured crystalline rocks. From Late Cambrian through Middle Ordovician time, a transgressive but cyclic sea covered the area. The oldest deposits were mostly permeable sand followed by slightly permeable calcareous mud consisting of aragonite and algal remains.

Arkansas, Colorado, Kansas, Missouri, Nebraska, Ne↗

USGS1987

Colorado Plateau

Field studies in the Colorado Plateau occupy an honored place in the development of geomorphic theory. The purpose of this chapter is to briefly review the foundational, regional, and process-oriented studies in the region, and to provide a review of promising threads of inquiry set in a context of more than a century of geomorphologic research in the region. The Colorado Plateau has sharply defined boundaries that separate it from neighboring geomorphic provinces (Fig. 1; for details see Thornbury, 1965). On the west, faults and the perimeters of volcanic plateaus mark the boundary between the Colorado Plateau and the Basin and Range Province. The boundary extends across the southern edge of the plateau where it is less radically defined, but is nonetheless visible on the surface in the form of an uplifted edge of sedimentary rocks known as the Mogollon Rim, which extends from northwest Arizona diagonally into north-central New Mexico. The eastern and northern boundaries are delineated by the contact between sedimentary rocks and upthrust or folded crystalline rocks of the Rocky Mountains. The plateau is a definable tectonic unit relatively easily separated from other provinces, but it shows considerable internal variation (Fig. 1; for details see Hunt, 1974a). The interior of the kidney-shaped Colorado Plateau Province reveals a series of subsections that depend on geologic and geomorphologic definition. The centrally located Canyon Lands Section is dominated by gently folded sedimentary rocks, while the western High Plateaus Section reveals widespread accumulations of volcanic materials.

Arizona, Colorado, New Mexico, Utah↗

USGS2014

Quality of groundwater in the Denver Basin aquifer system, Colorado, 2003-5

Groundwater resources from alluvial and bedrock aquifers of the Denver Basin are critical for municipal, domestic, and agricultural uses in Colorado along the eastern front of the Rocky Mountains. Rapid and widespread urban development, primarily along the western boundary of the Denver Basin, has approximately doubled the population since about 1970, and much of the population depends on groundwater for water supply. As part of the National Water-Quality Assessment Program, the U.S. Geological Survey conducted groundwater-quality studies during 2003–5 in the Denver Basin aquifer system to characterize water quality of shallow groundwater at the water table and of the bedrock aquifers, which are important drinking-water resources. For the Denver Basin, water-quality constituents of concern for human health or because they might otherwise limit use of water include total dissolved solids, fluoride, sulfate, nitrate, iron, manganese, selenium, radon, uranium, arsenic, pesticides, and volatile organic compounds. For the water-table studies, two monitoring-well networks were installed and sampled beneath agricultural (31 wells) and urban (29 wells) land uses at or just below the water table in either alluvial material or near-surface bedrock. For the bedrock-aquifer studies, domestic- and municipal-supply wells completed in the bedrock aquifers were sampled. The bedrock aquifers, stratigraphically from youngest (shallowest) to oldest (deepest), are the Dawson, Denver, Arapahoe, and Laramie-Fox Hills aquifers. The extensive dataset collected from wells completed in the bedrock aquifers (79 samples) provides the opportunity to evaluate factors and processes affecting water quality and to establish a baseline that can be used to characterize future changes in groundwater quality. Groundwater samples were analyzed for inorganic, organic, isotopic, and age-dating constituents and tracers. This report discusses spatial and statistical distributions of chemical constituents and evaluates natural and human-related processes that affect water quality. Findings are synthesized to assess the vulnerability of the Denver Basin aquifer system to groundwater contamination. The chemistry of groundwater samples collected from the water-table wells was generally different from that of samples collected from the bedrock-aquifer wells. Samples from the water-table wells tended to have higher concentrations of total dissolved solids and most major ions. Concentrations of several constituents with potential human-health concerns, including nitrate, selenium, uranium, and arsenic, decreased with depth and were highest in samples from the water-table wells. Exceedances of drinking-water standards and water-quality benchmarks were more frequently associated with shallow groundwater samples; concentrations of total dissolved solids and sulfate exceeded water-quality benchmarks for about half or more of samples from the water-table wells. The sediments and rocks of the Denver Basin are natural sources of the trace elements selenium, uranium, and arsenic, which affect their concentrations in groundwater. Detections of organic contaminants, which are typically indicative of human sources of contamination to groundwater, were more frequent in samples from the water-table wells. Pesticide compounds and volatile organic compounds were detected in 33 and 62 percent, respectively, of water-table well samples. Detected organic contaminant concentrations were much less than the associated drinking-water standards. Samples collected from the bedrock aquifers had lower concentrations of total dissolved solids than did samples collected from the water-table wells, although within the bedrock-aquifer samples, concentrations increased from the Dawson to Denver to Arapahoe to Laramie-Fox Hills aquifers. Concentrations of total dissolved solids and many constituents varied spatially and with depth in the bedrock aquifers, likely as a result of ion-exchange and oxidation-reduction reactions, which are important processes affecting water quality. Major-ion chemistry generally evolved from a calcium-bicarbonate to calcium-sulfate composition, with some sodium-bicarbonate and sodium-sulfate facies in the deeper bedrock aquifers, likely resulting from longer residence times and more extensive water-rock interaction. Oxidation-reduction conditions generally evolved from oxic at the water table to anoxic with increasing depth in the bedrock aquifers. Most samples from the bedrock aquifers were anoxic. Exceedances of drinking-water standards and water-quality benchmarks for the bedrock aquifers occurred in 1 percent or less of samples for nitrate, selenium, or arsenic; there were no exceedances for uranium. Exceedances for total dissolved solids, sulfate, manganese, and iron were generally between about 10 and 20 percent for the bedrock-aquifer samples. Radon concentrations, which were only measured in samples collected from two of the bedrock aquifers, exceeded the lower proposed drinking-water standard for more than 90 percent of samples but exceeded the higher alternative standard for less than 5 percent of samples. Pesticide compounds and volatile organic compounds were detected in 3 and 22 percent, respectively, of bedrock-aquifer samples, all at concentrations that were that were much less than drinking-water standards. Water-quality data were synthesized to evaluate factors that affect spatial and depth variability in water quality and to assess aquifer vulnerability to contaminants from geologic materials and those of human origin. The quality of shallow groundwater in the alluvial aquifer and shallow bedrock aquifer system has been adversely affected by development of agricultural and urban areas. Land use has altered the pattern and composition of recharge. Increased recharge from irrigation water has mobilized dissolved constituents and increased concentrations in the shallow groundwater. Concentrations of most constituents associated with poor or degraded water quality in shallow groundwater decreased with depth; many of these constituents are not geochemically conservative and are affected by geochemical reactions such as oxidation-reduction reactions. Groundwater age tracers provide additional insight into aquifer vulnerability and help determine if young groundwater of potentially poor quality has migrated to deeper parts of the bedrock aquifers used for drinking-water supply. Age-tracer results were used to group samples into categories of young, mixed, and old groundwater. Groundwater ages transitioned from mostly young in the water-table wells to mostly mixed in the shallowest bedrock aquifer, the Dawson aquifer, to mostly old in the deeper bedrock aquifers. Although the bedrock aquifers are mostly old groundwater of good water quality, several lines of evidence indicate that young, contaminant-bearing recharge has reached shallow to moderate depths in some areas of the bedrock aquifers. The Dawson aquifer is the most vulnerable of the bedrock aquifers to contamination, but results indicate that the older (deeper) bedrock aquifers are also vulnerable to groundwater contamination and that mixing with young recharge has occurred in some areas. Heavy pumping has caused water-level declines in the bedrock aquifers in some parts of the Denver Basin, which has the potential to enhance the transport of contaminants from overlying units. Results of this study are consistent with the existing conceptual understanding of aquifer processes and groundwater issues in the Denver Basin and add new insight into the vulnerability of the bedrock aquifers to groundwater contamination.

Colorado↗

USGS1989

Rocky Mountain Tertiary coal-basin models and their applicability to some world basins

Tertiary intermontane basins in the Rocky Mountain region of the United States contain large amounts of coal resources. The first major type of Tertiary coal basin is closed and lake-dominated, either mud-rich (e.g., North Park Basin, Colorado) or mud plus carbonate (e.g., Medicine Lodge Basin, Montana), which are both infilled by deltas. The second major type of Tertiary coal basin is open and characterized by a preponderance of sediments that were deposited by flow-through fluvial systems (e.g., Raton Basin, Colorado and New Mexico, and Powder River Basin, Wyoming and Montana). The setting for the formation of these coals varies with the type of basin sedimentation, paleotectonism, and paleoclimate. The mud-rich lake-dominated closed basin (transpressional paleotectonism and warm, humid paleoclimate), where infilled by sandy “Gilbert-type” deltas, contains thick coals (low ash and low sulfur) formed in swamps of the prograding fluvial systems. The mud- and carbonate-rich lake-dominated closed basin is infilled by carbonate precipitates plus coarse-grained fan deltas and fine-grained deltas. Here, thin coals (high ash and high sulfur) formed in swamps of the fine-grained deltas. The coarse-clastic, open basins (compressional paleotectonism and warm, paratropical paleoclimate) associated with flow-through fluvial systems contain moderately to anomalously thick coals (high to low ash and low sulfur) formed in swamps developed in intermittently abandoned portions of the fluvial systems. These coal development patterns from the Tertiary Rocky Mountain basins, although occurring in completely different paleotectonic settings, are similar to that found in the Tertiary, Cretaceous, and Permian intermontane coal basins in China, New Zealand, and India.

International Journal of Coal Geology↗