SEARCH · Search USGS
Results for “Professional Engineer”
Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Guidance documents: Continued support to improve operations of fish hatcheries and field sites to reduce the impact or prevent establishment of New Zealand Mudsnails and other invasive mollusks
This project tested and revised a risk assessment/management tool authored by Moffitt and Stockton designed to provide hatchery biologists and others a structure to measure risk and provide tools to control, prevent or eliminate invasive New Zealand mudsnails (NZMS) and other invasive mollusks in fish hatcheries and hatchery operations. The document has two parts: the risk assessment tool, and an appendix that summarizes options for control or management. The framework of the guidance document for risk assessment/hatchery tool combines approaches used by the Hazard Analysis and Critical Control Points (HACCP) process with those developed by the Commission for Environmental Cooperation (CEC), of Canada, Mexico, and the United States, in the Tri-National Risk Assessment Guidelines for Aquatic Alien Invasive Species. The framework approach for this attached first document assesses risk potential with two activities: probability of infestation and consequences of infestation. Each activity is treated equally to determine the risk potential. These two activities are divided into seven basic elements that utilize scientific, technical, and other relevant information in the process of the risk assessment. To determine the probability of infestation four steps are used that have scores reported or determined and averaged. This assessment follows a familiar HACCP process to assess pathways of entry, entry potential, colonization potential, spread potential. The economic, environmental and social consequences are considered as economic impact, environmental impact, and social and cultural influences. To test this document, the Principal Investigator worked to identify interested hatchery managers through contacts at regional aquaculture meetings, fish health meetings, and through the network of invasive species managers and scientists participating in the Western Regional Panel on Aquatic Nuisance Species and the 100th Meridian Initiative's Columbia River Basin Team, and the Western New Zealand Mudsnail Conference in Seattle. Targeted hatchery workshops were conducted with staff at Dworshak National Fish Hatchery Complex (ID), Similkameen Pond, Oroville WA, and Ringold Springs State Hatchery (WA). As a result of communications with hatchery staff, invasive species managers, and on site assessments of hatchery facilities, the document was modified and enhanced. Additional resources were added to keep it up to date. The result is a more simplified tool that can lead hatchery or management personnel through the process of risk assessment and provide an introduction to the risk management and communication process. In addition to the typical HACCP processes, this tool adds steps to rate and consider uncertainty and the weight of evidence regarding options and monitoring results . Uncertainty of outcome exists in most tools that can be used to control or prevent NZMS or other invasive mollusks from infesting an area. In additional this document emphasizes that specific control tools and plans must be tailored to each specific setting to consider the economic, environmental and social influences. From the testing and evaluation process, there was a strong recognition that a number of control and prevention tools previously suggested and reported in the literature from laboratory and small scale trials may not be compatible with regional and national regulations, economic constraints, social or cultural constraints, engineering or water chemistry characteristics of each facility. The options for control are summarized in the second document, Review of Control Measures for Hatcheries Infested with NZMS (Appendix A) that provides sources for additional resources and specific tools, and guidance regarding the feasibility and success of each approach. This tool also emphasizes that management plans need to be adaptive and incorporate oversight from professionals familiar with measuring risks of fish diseases, and treatments (e.g. the fish health practitioners and water quality and effluent management teams). Finally, with such a team, the adaptive management approach must be ongoing, and become a regular component of hatchery operations. Although it was the intent that this two part document would be included as part of the revised National Management and Control Plan for the NZMS proposed by the U.S. Fish and Wildlife Service (USFWS) and others, it is provided as a stand-alone document.
Coal mine bumps as related to geologic features in the northern part of the Sunnyside District, Carbon County, Utah
Coal mine bumps, which are violent, spontaneous, and often catastrophic disruptions of coal and rock, were common in the Sunnyside coal mining district, Utah, before the introduction of protective-engineering methods, modern room-and-pillar retreat mining with continuous mining machines, and particularly modern longwall mining. The coal at Sunnyside, when stressed during mining, fails continuously with many popping, snapping, and banging noises. Although most of the bumps are beneficial because they make mining easier, many of the large ones are dangerous and in the past caused injuries and fatalities, particularly with room- and-pillar mining methods used in the early mining operations. Geologic mapping of underground mine openings revealed many types of deformational features, some pre-mine and some post-mine in age. Stresses resulting from mining are concentrated near the mine openings; if openings are driven at large angles to small pre-mine deformational features, particularly shatter zones in coal, abnormal stress buildups may occur and violent bumps may result. Other geologic features, such as ripple marks, oriented sand grains, intertongued rock contacts, trace fossils, and load casts, also influence the occurrence of bumps by impeding slip of coal and rocks along bedding planes. The stress field in the coal also varies markedly because of the rough ridge and canyon topography. These features may allow excessively large stress components to accumulate. At many places, the stresses that contribute to deformation and failures of mine openings are oriented horizontally. The stratigraphy of the rocks immediately above and below the mined coal bed strongly influences the deformation of the mine openings in response to stress accumulations. Triaxial compressive testing of coal from the Sunnyside No.1 and No.3 Mines indicates that the strength of the coal increases several times as the confining (lateral) stress is increased. Strengths of cores cut from single large blocks of coal vary widely. Although the strengths of coal cores increase slowly at high levels of confining stress, the coal in Sunnyside No. 1 Mine is slightly stronger in laboratory tests than coal in Sunnyside No.3 Mine. The coal in No.1 Mine probably can store larger amounts of stress than coal in the No.3 Mine, which may account for the apparently greater number of violent bumps in No.1 Mine. The strength of coal, and its ability to store stress before failure, may correlate in part with chemical composition, particularly with the amounts of benzene ring compounds in vitrain; coal with relatively large amounts of benzene ring compounds is stronger than coal with lesser amounts of these compounds. Alternatively, the chemical composition of coal may affect its response to stress. Increasing contents of kaolinite in coal appear to reduce its compressive strength at low confining stresses, resulting in easy failures of pillars and ribs in mine openings. Applications of the geologic factors outlined in this report, carefully coupled with advanced modern engineering methods, have markedly reduced the hazards from coal mine bumps and related failures of mine openings at Sunnyside. Similar studies probably could aid in reducing bump-related hazards in other coal mining areas.
occupancyTuts: Occupancy modelling tutorials with RPresence
1. The occupancy modelling framework offers tremendous flexibility in estimating species abundance and distribution patterns while accounting for imperfect detection, and has seen rapid growth and adoption since its introduction at the beginning of the century. 2. At the same time, in an era of big data, there are increasing demands on developing quantitative skills and proficiency in young ecologists, many of whom lack the quantitative training needed to conduct research professionally. 3. We introduce occupancyTuts , an R package that features 28 learnr tutorials that teach the statistical underpinnings of several occupancy models. The tutorials include written content, instructional videos, R exercises, and quiz elements, covering a range of topics including statistical underpinnings, single- and dynamic-occupancy models, study design and several of the ‘spin-off’ models that extend the basic framework. 4. We plan for development of new tutorials that use RPresence as the analysis engine, and welcome new tutorial contributions that use other R packages as the analysis engine as well.
Aerial Photography Summary Record System
The Aerial Photography Summary Record System (APSRS) describes aerial photography projects that meet specified criteria over a given geographic area of the United States and its territories. Aerial photographs are an important tool in cartography and a number of other professions. Land use planners, real estate developers, lawyers, environmental specialists, and many other professionals rely on detailed and timely aerial photographs. Until 1975, there was no systematic approach to locate an aerial photograph, or series of photographs, quickly and easily. In that year, the U.S. Geological Survey (USGS) inaugurated the APSRS, which has become a standard reference for users of aerial photographs.
Historical review of the international water-resources program of the U.S. Geological Survey, 1940-70
The review describes the history of the U.S. Geological Survey 's (USGS) activities in international water-resources investigations and institutional development as well as exchange in scientific and applied hydrology during 1940-70. The bulk of these activities has been carried out under the auspices of the U.S. Department of State, U.S. Agency for International Development and its predecessors, the United Nations and its specialized agencies, and the regional intergovernmental agencies. The central objectives of the USGS ' international water-resources activities have been to strengthen the administrative, staff, and operational functions of counterpart governmental hydrological and water-resources agencies; to improve the skills and capabilities of host-country scientific, engineering, and technical personnel; to exchange research specialists and publications in the sharing of advances in hydrological knowledge and methodology; and to participate in mutually beneficial international organizations, symposia, conferences, seminars, and special programs dedicated to various aspects of scientific and applied hydrology. Between 1940 and 1970, USGS hydrogeologists, water chemists, engineers, and hydrologists completed 340 short- and long-term project-oriented international assignments in some 80 host countries. During the same time more than 428 water scientists, engineers, and technicians from 60 countries have received academic and in-service training through USGS water-resources facilities in the United States. Also in this period some 336 reports of a technical and scientific nature have resulted from water-resources projects in the U.S bilateral program. (Woodard-USGS)
SSA task force on diversity, equity, and inclusion: Toward a changing, inclusive future in earthquake science
In the United States, a wide variety of studies show that the geoscience community does not reflect the broader societal makeup (e.g., Velasco and Jaurrieta de Velasco, 2010; Dutt, 2020; Howley, 2020). In fact, only about 10% of all Science, Technology, Engineering, and Mathematics (STEM) Ph.D. degrees are awarded to people of color, although they represent more than a third of the population (Dutt, 2020). These numbers have changed little over the past 40 yr (e.g., Bernard and Cooperdock, 2018; Dutt, 2020). Recent events in the United States have again raised awareness of this discrepancy in many fields; similar divergences may be present throughout the world. This discrepancy represents a tremendous loss of talent and contributes to ongoing bias and racism. As the premier international seismological professional society, Seismological Society of America (SSA) is committed, as stated in its ethics policy, to “freedom and transparency in research and education, which should be conducted in a supportive, inclusive, and respectful environment, free from any discrimination, harassment or bullying.” SSA convened the SSA Diversity, Equity, and Inclusion (DEI) Task Force to identify specific and actionable recommendations that the Society can take to start to address the significant issues surrounding the systematic underrepresentation in seismology and related geosciences by marginalized groups on both short- and long- term time horizons. This report, written by the Task Force, outlines actionable items that SSA can undertake as well as a framework by which progress can be measured to help guide the Society and its members forward as a community to make earthquake science more just, equitable, diverse, and inclusive. We recognize that this document cannot address the multiple individual, cultural, and historical barriers that some members may face (e.g., Núñez et al., 2020), nor can it reflect all possibilities or all recommended practices (e.g., Ali et al., 2021). What this document does represent, however, is the beginning of what we hope to be a significant cultural change in how we conduct earthquake science as an organization, not the end of this process as the Task Force fulfills its charter. As a note, some of the recommendations that the Task Force has outlined here have already been implemented within SSA or are actively being considered. For completeness, we still include them here because this highlights the commitment to change that SSA leadership has embraced.
Flood of April 1977 in the Appalachian region of Kentucky, Tennessee, Virginia, and West Virginia
Heavy rains fell over the Appalachian region of Kentucky, Tennessee, Virginia and West Virginia April 2-5, 1977, causing record flooding. Rainfall amounts of 4 to 15.5 inches were observed. The maximum amount of 15.5 inches occurred at Jolo, WV , in about 30 hours. This was more than twice the amount which would be expected for a 100-year recurrence-interval storm. Flood discharges along the upper Guyandotte River; Tug Fork and Levisa Fork in the Big Sandy River basin; Cumberland River; and Clinch River and Dowell River in the Tennessee River basin exceeded those previously known. Severe flooding also occurred along the Holston River and along the North Fork Kentucky River. Recurrence intervals of observed flood discharges were greater than 100-years at 29 streamflow measurement sites. Substantial reductions in peak stages and discharges on Levisa Fork, North Pound River, and Guyandotte River, attained as a result of reservoir storage, were reported by U.S. Army Corps of Engineers. Maximum daily suspended-sediment discharges on Guyandotte River near Baileysville, WV, and Tug Fork at Glenhayes, WV, were 54,800 tons/day and 290,000 tons/day, respectively, April 5, 1977. Twenty-two lives were lost and total property damage reportedly exceeded $400 million in the four-State area. (USGS)
Formation, evolution, and stability of coastal cliffs: Status and trends
The Ocean Studies Board of the National Research Council recently reviewed the U.S. Geological Survey's Coastal and Marine Geology (USGS-CMG) program. One of the Board's primary recommendations was that CMG prepare comprehensive assessments of the nation's coastal and marine regions, drawing on expertise not only from within the USGS, but also from outside agencies and academic institutions. In response to that recommendation, this report assesses the status and trends of coastal cliffs along the shorelines of the conterminous United States and the Great Lakes. By "status" is meant the present distribution and character of coastal cliffs, as well as their current relevance to social issues such as coastal development. By "trends" is meant the changes in status caused by both geological forces and human activities. Coastal cliffs are steep escarpments at the coastline. They commonly form during times of rising sea level, such as the present, as the shoreline advances landward and erodes the elevated landmass. Coastal cliffs are a common landform, particularly on the west, northeast, and Great Lakes coasts of the United States, as well as within large estuaries. The land adjacent to coastal cliffs has been heavily developed along much of the coast, particularly in urban areas where the natural instability and progressive retreat of the cliffs pose a threat to life and property. Coastal land is permanently lost when coastal cliffs collapse and retreat landward, which is an important national issue in coastal planning, management, and engineering. The content of this report was derived from the personal expertise of the authors and from the extensive scientific literature concerned with coastal cliffs. As a report to the Nation, it is intended for a broad audience. Both topical and regional aspects are presented. It is important to recognize that the emphasis of this report is on the geology of coastal cliffs; engineering, land-use, and regulatory issues are addressed only where there is a clear link to the geologic nature of coastal cliffs. The editors appreciate the thorough and careful review of the entire manuscript by Alan Trenhaile and Laura Moore. Their editing, comments, and questions greatly improved the content and clarity of the final report.
Water professionals and water policy in the Black Hills region
A case study approach based on examples from the Black Hills region is used to evaluate the role of water professionals in developing feasible and fair public policy involving water resources. Examples presented include a long-term hydrologic investigation in the Black Hills, a local wellhead protection program, issues being addressed by a local flood management commission, coordination of definitions of beneficial stream uses by two state agencies, water-quality problems related to rapid population increase in a rural area, and impacts of potential climate change on water resources. In some of these examples, the hydrologic work was separated from policy making to ensure neutrality. In other examples, involvement of the hydrologists and water resource engineers directly benefited policy development. Opportunities for increased effectiveness were observed in most of the examples.
Spatially explicit habitat models for 28 fishes from the Upper Mississippi River System (AHAG 2.0)
Environmental management actions in the Upper Mississippi River System (UMRS) typically require pre-project assessments of predicted benefits under a range of project scenarios. The U.S. Army Corps of Engineers (USACE) now requires certified and peer-reviewed models to conduct these assessments. Previously, habitat benefits were estimated for fish communities in the UMRS using the Aquatic Habitat Appraisal Guide (AHAG v.1.0; AHAG from hereon). This spreadsheet-based model used a habitat suitability index (HSI) approach that drew heavily upon Habitat Evaluation Procedures (HEP; U.S. Fish and Wildlife Service, 1980) by the U.S. Fish and Wildlife Service (USFWS). The HSI approach requires developing species response curves for different environmental variables that seek to broadly represent habitat. The AHAG model uses species-specific response curves assembled from literature values, data from other ecosystems, or best professional judgment. A recent scientific review of the AHAG indicated that the model’s effectiveness is reduced by its dated approach to large river ecosystems, uncertainty regarding its data inputs and rationale for habitat-species response relationships, and lack of field validation (Abt Associates Inc., 2011). The reviewers made two major recommendations: (1) incorporate empirical data from the UMRS into defining the empirical response curves, and (2) conduct post-project biological evaluations to test pre-project benefits estimated by AHAG. Our objective was to address the first recommendation and generate updated response curves for AHAG using data from the Upper Mississippi River Restoration-Environmental Management Program (UMRR-EMP) Long Term Resource Monitoring Program (LTRMP) element. Fish community data have been collected by LTRMP (Gutreuter and others, 1995; Ratcliff and others, in press) for 20 years from 6 study reaches representing 1,930 kilometers of river and >140 species of fish. We modeled a subset of these data (28 different species; occurrences at sampling sites as observed in day electrofishing samples) using multiple logistic regression with presence/absence responses. Each species’ probability of occurrence, at each sample site, was modeled as a function of 17 environmental variables observed at each sample site by LTRMP standardized protocols. The modeling methods used (1) a forward-selection process to identify the most important predictors and their relative contributions to predictions; (2) partial methods on the predictor set to control variance inflation; and (3) diagnostics for LTRMP design elements that may influence model fits. Models were fit for 28 species, representing 3 habitat guilds (Lentic, Lotic, and Generalist). We intended to develop “systemic models” using data from all six LTRMP study reaches simultaneously; however, this proved impossible. Thus, we “regionalized” the models, creating two models for each species: “Upper Reach” models, using data from Pools 4, 8, and 13; and “Lower Reach” models, using data from Pool 26, the Open River Reach of the Mississippi River, and the La Grange reach of the Illinois River. A total of 56 models were attempted. For any given site-scale prediction, each model used data from the three LTRMP study reaches comprising the regional model to make predictions. For example, a site-scale prediction in Pool 8 was made using data from Pools 4, 8, and 13. This is the fundamental nature and trade-off of regionalizing these models for broad management application. Model fits were deemed “certifiably good” using the Hosmer and Lemeshow Goodness-of-Fit statistic (Hosmer and Lemeshow, 2000). This test post-partitions model predictions into 10 groups and conducts inferential tests on correspondences between observed and expected probability of occurrence across all partitions, under Chi-square distributional assumptions. This permits an inferential test of how well the models fit and a tool for reporting when they did not (and perhaps why). Our goal was to develop regionalized models, and to assess and describe circumstances when a good fit was not possible. Seven fish species composed the Lentic guild. Good fits were achieved for six Upper Reach models. In the Lower Reach, no model produced good fits for the Lentic guild. This was due to (1) lentic species being much less prominent in the Lower Reach study areas, and (2) those that do express greater prominence principally do so only in the La Grange reach of the Illinois River. Thus, developing Lower Reach models for Lentic species will require parsing La Grange from the other two Lower Reach study areas and fitting separate models. We did not do that as part of this study, but it could be done at a later time. Nine species comprised the Lotic guild. Good fits were achieved for seven Upper Reach models and six Lower Reach models. Four species had good fits for both regions (flathead catfish, blue sucker, sauger, and shorthead redhorse). Three species showed zoogeographic zonation, with a good model fit in one of the regions, but not in the region in which they were absent or rarely occurred (blue catfish, rock bass, and skipjack herring). Twelve species comprised the Generalist guild. Good fits were achieved for five Upper Reach models and eight Lower Reach models. Six species had good fits for both regions (brook silverside, emerald shiner, freshwater drum, logperch, longnose gar, and white bass). Two species showed zoogeographic zonation, with a good model fit in one of the regions, but not in the region in which they were absent or rarely occurred (red shiner and blackstripe topminnow). Poorly fit models were almost always due to the diagnostic variable “field station,” a surrogate for river mile. In these circumstances, the residuals for “field station” were non-randomly distributed and often strongly ordered. This indicates either fitting “pool scale” models for these species and regions, or explicitly model covariances between “field station” and the other predictors within the existing modeling framework. Further efforts on these models should seek to resolve these issues using one of these two approaches. In total, nine species, representing two of the three guilds (Lotic and Generalist), produced well-fit models for both regions. These nine species should comprise the basis for AHAG 2.0. Additional work, likely requiring downscaling of the regional models to pool-scale models, will be needed to incorporate additional species. Alternately, a regionalized AHAG could be comprised of those species, per region, that achieved well-fit models. The number of species and the composition of the regional species pools will differ among regions as a consequence. Each of these alternatives has both pros and cons, and managers are encouraged to consider them fully before further advancing this approach to modeling multi-species habitat suitability.
Digital terrain modelling and industrial surface metrology - Converging crafts
Quantitative characterisation of surface form, increasingly from digital 3-D height data, is cross-disciplinary and can be applied at any scale. Thus, separation of industrial-surface metrology from its Earth-science counterpart, (digital) terrain modelling, is artificial. Their growing convergence presents an opportunity to develop in surface morphometry a unified approach to surface representation. This paper introduces terrain modelling and compares it with metrology, noting their differences and similarities. Examples of potential redundancy among parameters illustrate one of the many issues common to both disciplines. ?? 2001 Elsevier Science Ltd. All rights reserved.
Developing and implementing an International Macroseismic Scale (IMS) for earthquake engineering, earthquake science, and rapid damage assessment
Executive Summary Macroseismic observations and analysis connect our collective seismological past with the present and the present to the future by facilitating hazard estimates and communicating the effects of ground shaking to a wide variety of audiences across the ages. Invaluable ground shaking and building damage information is gained through standardized, systematic approaches for assigning intensities and, importantly, sharing and archiving those assignments in a reproducible form. The applications for these assignments are far reaching. Traditional macroseismic surveys provide vital constraints on critical aspects of earthquakes and their effects on society, whereas internet-based macroseismic datasets are extremely valuable for real-time earthquake situational awareness, and they contribute to later engineering loss and risk analyses. These important applications of macroseismic observations would be helped by revisiting traditional macroseismic surveys for modern environments, standardizing internet-based collection strategies, and ensuring compatibility between traditional and internet-based approaches of macroseismic data collection. Even with best practices, we have identified several limitations with modern macroseismic data collection approaches, particularly from the U.S. Geological Survey's perspective. First, whereas crowdsourced, internet-based intensities such as “Did You Feel It?” are robust and definitive for lower intensities, they are poorly defined above intensity VII, where damage observations may require expert knowledge of each building’s structural system. Second, in the United States, we use the Modified Mercalli Intensity (MMI) Scale, which is consistent with—yet inferior to—the more recently developed European Macroseismic Scale (EMS–98; Grünthal and others, 1998). Similarly, New Zealand uses the New Zealand MMI Scale (Dowrick and others, 2008), which lacks detail on how to assign intensities above MMI VIII. The EMS–98 fundamentally advanced the science of macroseismic intensity assignment by requiring quantitative assessments at each location through consistent application on statistical ranges of well-defined damage grades to building-specific vulnerability classes. Lastly, the United States and New Zealand no longer have professionals dedicated to conducting traditional macroseismic field surveys, so a strategy is needed for allowing postearthquake building inspectors and insurance loss assessors to contribute to intensity assignments. The goals of our International Macroseismic Scale workshop were thus twofold. First, harmonize the MMI Scale with EMS–98 for the United States and New Zealand—which share several similar building types—by considering those structures and associated damage grades that are not well represented in the current EMS–98 building vulnerability class table. Second, begin to formalize the process of augmenting EMS–98 with new regional building classes and damage grades toward the development of a macroseismic scale that can be used globally, beyond the United States and New Zealand. Such an effort necessarily requires reviewing and expanding the original EMS–98 explanatory documents and consideration of any required revisions. We can build on the shoulders of giants in that a few of the original EMS–98 developers and experts participated in and were integral to our workshop. Their background and guidance were key in moving forward toward an international scale. We agreed that additional building vulnerability classes, damage grades, and written and pictorial descriptions are necessary and ideally accompanied by a detailed paper trail for other nations to follow. If we can improve the macroseismic assignment process in both nations, we can also aim to refine the process of collecting postearthquake impact data, a boon to many engineering and financial concerns. The benefits of a truly International Macroseismic Scale are considerable for both the engineering and seismology communities. A modern macroseismic scale requires more deliberate archival damage data collection, motivating more consistent and accessible postevent datasets that would have applications beyond the specific event. Applying field-collected building damage data toward macroseismic assignments would allow for increased coordination between engineering reconnaissance teams and local inspectors in collecting such data for official purposes. In addition, rapid and consistent intensity assignments globally would enable more accurate ShakeMaps—and thus improved earthquake engineering and geotechnical forensics, loss and risk estimates, and correlations between macroseismic intensity and ground motion parameters. A brief summary of the Powell Center IMS workshop was published by Wald and others (2023) in the magazine Eos. This Open-File Report describes the workshop, its discussions, and its outcomes in detail. In summarizing the workshop, we have added important background material and reflections for proper context.
Geology of the Chesapeake and Ohio Canal National Historical Park and Potomac River Corridor, District of Columbia, Maryland, West Virginia, and Virginia
The Chesapeake and Ohio Canal National Historical Park is 184.5 mi long and extends from Washington, D.C., to Cumberland, Md. The canal passes through three physiographic provinces including the Piedmont, Valley and Ridge, and the Blue Ridge; the map area also includes rocks of the Coastal Plain and Appalachian Plateaus provinces. Each province contains unique packages of rocks that influenced the character of the canal and towpath. The ages of the bedrock encountered along the length of the park range from Mesoproterozoic to Jurassic and represent a variety of tectonic and depositional environments. The different rock types and surficial deposits dictated the various construction methods for the canal, which was excavated in Quaternary flood-plain deposits as well as through bedrock. The ancient course of the Potomac River and the deposits it left behind also influenced the location of the canal and towpath. The engineers made good use of the many rock types to construct the locks, dams, aqueducts, and culverts that guided water from the Potomac River into the canal and maintained the water level as canal boats traveled between higher elevations in western Maryland to sea level in Washington, D.C. The canal and towpath provide a unique transect across the central Appalachian region for examining the rich geologic diversity and history.
The effects of earthquake measurement concepts and magnitude anchoring on individuals' perceptions of earthquake risk
The purpose of this research is to explore earthquake risk perceptions in California. Specifically, we examine the risk beliefs, feelings, and experiences of lay, professional, and expert individuals to explore how risk is perceived and how risk perceptions are formed relative to earthquakes. Our results indicate that individuals tend to perceptually underestimate the degree that earthquake (EQ) events may affect them. This occurs in large part because individuals' personal felt experience of EQ events are generally overestimated relative to experienced magnitudes. An important finding is that individuals engage in a process of "cognitive anchoring" of their felt EQ experience towards the reported earthquake magnitude size. The anchoring effect is moderated by the degree that individuals comprehend EQ magnitude measurement and EQ attenuation. Overall, the results of this research provide us with a deeper understanding of EQ risk perceptions, especially as they relate to individuals' understanding of EQ measurement and attenuation concepts. ?? 2005, Earthquake Engineering Research Institute.
Investigations of the characteristics, origin, and residence time of the upland residual mantle of the Piedmont of Fairfax County, Virginia
Undisturbed cores of upland regolith developed from a variety of crystalline rocks of the Piedmont province in Fairfax County, Va., have been obtained by using a combination of Shelby tubes, Denison sampler, and modified diamond core drilling. The core study correlated variations in chemistry, mineralogy, and texture with engineering properties throughout individual weathering profiles and contrasted these parameters among weathering profiles developed from various parent rocks. Coring sites were chosen to obtain a maximum depth of weathering on diverse lithologies. The rocks that were investigated included metapelite, metagraywacke, granite, diabase, and serpentinite. Four to twelve samples per core were selected for analysis of petrography, texture, clay mineralogy, and major-element chemistry. The number of samples was determined on the basis of (1) the thickness of the weathering profile (from about 1 m in serpentinite to more than 30 m in pelitic schist) and (2) megascopic changes in the weathering profile. Shear strength and compressibility were determined on corresponding segments of core. Standard penetration tests were performed adjacent to coring sites to evaluate in-place engineering properties. The regolith profiles on all rocks can be subdivided into soil, massive subsoil, saprolite, and weathered rock zones. Major differences in thicknesses of these zones are related to parent rock. Total regolith thickness is related to saprolite thickness. Saprolite is thickest on quartzofeldspathic metapelite, metagraywacke, and granite; thinner on diabase; and thinnest on serpentinite. Thickness of saprolite is related to rock structure and mineralogy. Geochemical changes of saprolite developed from each rock type follow predictable trends from fresh rock to soil profile, with increases in Ti, AI, Fe 3 +, and H 2 0+relative to absolute losses of Si, Fe2+, Mg, Ca, and Na. These variations are more pronounced in the weathering profiles above mafic and ultramafic rocks than in those above metagraywacke. Clay minerals in granite, schist, and metagraywacke saprolites are kaolinite, dioctahedral vermiculite, interlayered mica-vermiculite, and minor illite. Gibbsite is developed in near-surface samples of schist. Standard penetration test data for the upper 7 m of saprolite above schist, metagraywacke, and granite suggest alternations between stronger and weaker horizons that correlate with megascopic ally identified zones: soil, massive subsoil, and saprolite. The data correlate with density. Shear strength increases fairly regularly downward in the weathering profile. The engineering behavior of diabase saprolite is controlled by a dense, plastic, near-surface clay layer (montmorillonite and kaolinite) overlying rock that is weathered to a granular state (grus); the engineering properties of serpentinite are controlled by a very thin weathering profile. Similarities in regolith thickness, zonation, mineralogy, and chemistry of quartzofeldspathic rocks indicate the existence of fundamental geochemical and geomechanical controls on regolith evolution on the Piedmont upland. Data from the profiles of quartzofeldspathic regolith are used to construct a model suggesting the principal rate-control steps in the development and downwasting of the upland regolith. This model is consistent with available information about Piedmont hydrology and tectonic uplift.
Evaluation of chemical and hydrologic processes in the eastern Snake River Plain Aquifer based on results from geochemical modeling, Idaho National Laboratory, eastern Idaho
Nuclear research activities at the U.S. Department of Energy (DOE) Idaho National Laboratory (INL) produced liquid and solid chemical and radiochemical wastes that were disposed to the subsurface resulting in detectable concentrations of some waste constituents in the eastern Snake River Plain (ESRP) aquifer. These waste constituents may affect the water quality of the aquifer and may pose risks to the eventual users of the aquifer water. To understand these risks to water quality the U.S. Geological Survey, in cooperation with the DOE, conducted geochemical mass-balance modeling of the ESRP aquifer to improve the understanding of chemical reactions, sources of recharge, mixing of water, and groundwater flow directions in the shallow (upper 250 feet) aquifer at the INL. Modeling was conducted using the water chemistry of 127 water samples collected from sites at and near the INL. Water samples were collected between 1952 and 2017 with most of the samples collected during the mid-1990s. Geochemistry and isotopic data used in geochemical modeling consisted of dissolved oxygen, carbon dioxide, major ions, silica, aluminum, iron, and the stable isotope ratios of hydrogen, oxygen, and carbon. Geochemical modeling results indicated that the primary chemical reactions in the aquifer were precipitation of calcite and dissolution of plagioclase (An 60 ) and basalt volcanic glass. Secondary minerals other than calcite included calcium montmorillonite and goethite. Reverse cation exchange, consisting of sodium exchanging for calcium on clay minerals, occurred near site facilities where large amounts of sodium were released to the ESRP aquifer in wastewater discharge. Reverse cation exchange acted to retard the movement of wastewater-derived sodium in the aquifer. Regional groundwater inflow was the primary source of recharge to the aquifer underlying the Northeast and Southeast INL Areas. Birch Creek (BC), the Big Lost River (BLR), and groundwater from BC valley provided recharge to the North INL Area, and the BLR and groundwater from BC and Little Lost River (LLR) valleys provided recharge to the Central INL Area. The BLR, groundwater from the BLR and LLR valleys and the Lost River Range, and precipitation provided recharge to the Northwest and Southwest INL Areas. The primary source of recharge west and southwest of the INL was groundwater inflow from BLR valley. Upwelling geothermal water was a small source of recharge at two wells. Aquifer recharge from surface water in the northern, central, and western parts of the INL indicated that the aquifer in these areas was a dynamic, open system, whereas the aquifer in the eastern part of the INL, which receives little recharge from surface water, was a relatively static and closed system. Sources of recharge identified from isotope ratios and geochemical modeling (major ion concentrations) were nearly identical for the North, Northeast, Southeast, and Central INL Areas, which indicated that both methods probably accurately identified the sources of recharge in these areas. Conversely, isotope ratios indicated that the BLR and groundwater from the LLR valley provided most recharge to the western parts of the Northwest and Southwest INL Areas, whereas geochemical modeling results indicated a smaller area of recharge from the BLR and groundwater from the LLR valley, a larger area of recharge from the Lost River Range, and recharge of groundwater from the BLR valley that extended to the west INL boundary. The results from geochemical modeling probably were more accurate because major ion concentrations, but not isotope ratios, were available to characterize groundwater from the BLR valley and the Lost River Range. Sources of recharge identified with a groundwater flow model (using particle tracking) and geochemical modeling were similar for the Northeast and Southeast INL Areas. However, differences between the models were that the geochemical model represented (1) recharge of groundwater from the Lost River Range in the western part of the INL, whereas the flow model did not, (2) recharge of groundwater from the BC and BLR valleys extending farther south and east, respectively, than the flow model, and (3) more recharge from the BLR in the Southwest INL Area than the flow model. Mixing of aquifer water beneath the INL included (1) mixing of regional groundwater and water from the BC valley in the Northeast and Southeast INL Areas and (2) mixing of surface water (primarily from the BLR) and groundwater across much of the North, Central, Northwest, and Southwest INL Areas. Localized recharge from precipitation mixed with groundwater in the Northwest and Southwest INL Areas, and localized upwelling geothermal water mixed with groundwater in the Central and Northeast INL Areas. Flow directions of regional groundwater were south in the eastern part of the INL and south-southwest at downgradient locations. Groundwater from the BC and LLR valleys initially flowed southeast before changing to south-southwest flow directions that paralleled regional groundwater, and groundwater from the BLR valley initially flowed south before changing to a southsouthwest direction. Wastewater-contaminated groundwater flowed south from the Idaho Nuclear Technology and Engineering Center (INTEC) infiltration ponds in a narrow plume, with the percentage of wastewater in groundwater decreasing due to dilution, dispersion, and (or) degradation from about 60‒80 percent wastewater 0.7‒0.8 mile (mi) south of the INTEC infiltration ponds to about 1.4 percent wastewater about 15.5 mi south of the INTEC infiltration ponds. Wastewater contaminated groundwater flowed southeast and then southwest from the Naval Reactors Facility industrial waste ditch, with the percentage of wastewater in groundwater decreasing from about 100 percent wastewater adjacent to the waste ditch to about 2 percent wastewater about 0.6 mi south of the waste ditch.
Summary appraisals of the Nation's ground-water resources; Alaska
Alaska has enormous surface-water resources, but many of the streams are frozen for most of the year and most contain glacial silt that makes them unacceptable for human use. These factors lend special significance to ground water as a water-supply source, even though perennially frozen ground (permafrost) profoundly modifies ground-water flow systems in much of Alaska north of the maritime southern coast and southeastern panhandle areas. Frozen ground is a virtually impermeable layer that restricts recharge, discharge, and movement of ground water, acts as a confining layer and limits the volume of unconsolidated deposits and bedrock in which water may be stored. Ground water is an untested resource in most of Alaska, but in many areas potential development of ground water far exceeds current use. Alluvium of major river valleys, such as the Yukon, Tanana, Kuskokwim and Susitna Rivers, probably contains the most extensive aquifers in the State. Large amounts of ground water are also stored in glacial outwash aquifers that underlie coastal basins and valleys, such as those at Kenai and Anchorage in the Cook Inlet lowland. Individual wells yielding more than 1,000 gallons per minute have been developed in the Tanana River valley, Cook Inlet lowland, and the coastal valleys at Seward and Juneau. Comparable yields should be possible in other areas that have similar geohydrologic environments. No major aquifers have been identified in glacial and glaciolacustrine deposits of interior valleys or in deltaic deposits. Major bedrock aquifers have been identified only in carbonate rocks of the Brooks Range and on the north side of the Alaska Range. Springs issuing from the carbonate rocks of the Brooks Range have discharges as great as 16,000 gallons per minute. Most ground-water recharge occurs beneath reaches of stream channels that are losing flow to the ground-water system. Most ground-water discharge also takes place along reaches of stream channels. This discharge augments streamflows during summer and maintains low flows during winter when there is no surface-water runoff. On the basis of a streamflow hydrograph separation technique and using the 60 percent flow-duration value as an indicator of ground-water discharge, it is estimated that 25 percent of the total volume of streamflow in Alaska (exclusive of coastal, maritime environments) is contributed by ground-water discharge. The thawing of frozen ground in the permafrost regions of Alaska causes construction and engineering problems. Disturbance of the ground surface disrupts the natural thermal equilibrium and tends to thaw part of the permafrost. Thawing can cause loss of strength, a decrease in volume, and an increase in erosion potential, particularly if the frozen ground is fine grained and poorly drained. Present deficiencies in the ground-water information base are obvious limiting factors to ground-water development in Alaska. There is a need to extend the ground-water data-collection network and to pursue special research into the quantitative aspects of ground-water hydrology in cold regions, particularly the continuous permafrost zone.