Search USGS⌕ Search

SEARCH · Search USGS

Results for “Photogrammetric Engineering”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11Linked to original sources
USGS2014

Landsat: Sustaining earth observations beyond Landsat 8

The Landsat series of Earth-observing satellites began 41-years ago as a partnership between the U.S. Geological Survey (USGS) of the Department of the Interior (DOI) and The National Aeronautics and Space Administration (NASA). For the past 41 years, Landsat satellites and associated U.S. Government ground processing, distribution, and archiving systems have acquired and made available global, moderate-resolution, multispectral measurements of land and coastal regions, providing humankind’s longest record of our planet from space. Landsat information is truly a national asset, providing an important and unique capability that benefits abroad community, including Federal, state, and local governments; globalchange science; academia, and the private sector.

Photogrammetric Engineering and Remote Sensing↗
USGS1992

Destriping of Landsat MSS images by filtering techniques

The removal of striping noise encountered in the Landsat Multispectral Scanner (MSS) images can be generally done by using frequency filtering techniques. Frequency domain filtering has, however, several problems, such as storage limitation of data required for fast Fourier transforms, ringing artifacts appearing at high-intensity discontinuities, and edge effects between adjacent filtered data sets. One way for circumventing the above difficulties is to design a spatial filter to convolve with the images. Because it is known that the striping always appears at frequencies of 1/6, 1/3, and 1/2 cycles per line, it is possible to design a simple one-dimensional spatial filter to take advantage of this a priori knowledge to cope with the above problems. The desired filter is the type of finite impulse response which can be designed by a linear programming and Remez's exchange algorithm coupled with an adaptive technique. In addition, a four-step spatial filtering technique with an appropriate adaptive approach is also presented which may be particularly useful for geometrically rectified MSS images.

Photogrammetric Engineering and Remote Sensing↗
USGS1992

The 1990 conterminous U. S. AVHRR data set

The U.S. Geological Survey, using NOAA-ll Advanced Very High Resolution Radiometer (AVHRR) 1-km data, has produced a time series of 19 biweekly maximum normalized difference vegetation index (NDV!) composites of the conterminous United States for the 1990 growing season. Each biweekly composite included data from approximately 20 calibrated and georegistered daily overpasses. The output is a data set which includes all five calibrated AVHRR channels, NOV! values, three satellite/solar viewing angles, and date of observation pointer for each biweekly composite. The data set is intended for assessing seasonal variations in vegetation condition and provides a foundation for studying long-term changes in vegetation resulting from human interactions or global climate alterations.

Photogrammetric Engineering and Remote Sensing↗
USGS1991

Integration of remote sensing and GIS: Data and data access

CT: Theintegration of remote sensing tools and technology with the spatial analysis orientation of geographic information systems is a complex task. In this paper, we focus on the issues of making data available and useful to the user. In part, this involves a set of problems which reflect on the physical and logical structures used to encode the data. At the same time, however, the mechanisms and protocols which provide information about the data, and which maintain the data through time, have become increasingly important. We discuss these latter issues from the viewpoint of the functions which must be provided by archives of spatial data.

Photogrammetric Engineering and Remote Sensing↗
USGS2013

The benefits of improved national elevation data

This article describes how the National Enhanced Elevation Assessment (NEEA) has identified substantial benefits that could come about if improved elevation data were publicly available for current and emerging applications and business uses such as renewable energy, precision agriculture, and intelligent vehicle navigation and safety. In order to support these diverse needs, new national elevation data with higher resolution and accuracy are needed. The 3D Elevation Program (3DEP) initiative was developed to meet the majority of these needs and it is expected that 3DEP will result in new, unimagined information services that would result in job growth and the transformation of the geospatial community. Private-sector data collection companies are continuously evolving sensors and positioning technologies that are needed to collect improved elevation data. An initiative of this scope might also provide an opportunity for companies to improve their capabilities and produce even higher data quality and consistency at a pace that might not have otherwise occurred.

Photogrammetric Engineering and Remote Sensing↗
USGS2005

Three in one: Multiscale Hardcopy Depiction of the Mars Surface in True3D

The visualisation of both geospatial Earth data and extra-terrestrial objects is gain- ing increasing importance. Until recently, hardcopy displays were confined to mostly static, two-dimensional or pseudo-three-dimensional depictions. The various effects offered by lenticular foil technology allow the generation of flip-image effects, short animations, and true-3D displays in hardcopy form. One advantage of this method is that these effects can be spontaneously viewed with the unaided eye. This article gives a concise overview of the lenticular foil technology (hereafter lenticular technology) and describes the production of the lenticular display presented on the cover of this month's issue of PE&RS.

Photogrammetric Engineering and Remote Sensing↗
USGS2005

Mars

No abstract available.

Photogrammetric Engineering and Remote Sensing↗
USGS1990

Lava flow surface textures: SIR-B radar image texture, field observations, and terrain measurements

Space Shuttle Imaging Radar (SIR-8) images, field observations, and small-scale (cm) terrain measurements are used to study lava flow surface textures related to emplacement processes of a single hawaiian lava flow. Although smooth pahoehoe textures are poorly characterized on the SIR-B data, rougher pahoehoe types and the a'a flow portion show image textures attributed to spatial variations in surface roughness. Field observations of six distinct lava flow textural units are described and used to interpret modes of emplacement. Terrain measurements of these units show that surface roughness differs across and along the flow, apparently due to shear during flow emplacement. The radar smooth/rough boundary between pahoehoe and a'a occurs at a vertical relief of -10 cm on this lava flow. While direct observation and measurement most readily yield information related to lava eruption and emplacement processes, analyses of remote sensing data such as those acquired by imaging radars and altimeters can provide a means of quantifying surface texture, identifying the size and distribution of flow components, and delineating textural unit boundaries.

Hawaii↗
USGS1998

Resource management of forested wetlands: Hurricane impact and recovery mapped by combining Landsat TM and NOAA AVHRR data

A temporal suite of NOAA Advanced Very High Resolution Radiometer (AVHRR) images, transformed into a vegetation biomass indicator, was combined with a single-date classification of Landsat Thematic Mapper (TM) to map the association between forest type and hurricane effects. Hurricane effects to the forested wetland included an abrupt decrease and subsequent increase in biomass. The decrease was associated with hurricane impact and the increase with an abnormal bloom in vegetation in the impacted areas. Impact severity was estimated by differencing the biomass maps before and immediately (3 days) after the hurricane. Recovery magnitude was estimated by differencing the biomass maps from immediately (3 days) after and shortly (1.5 months) after the hurricane. Regions of dominantly hardwoods suffering high to moderate impacts and of dominantly cypress-tupelos suffering low impacts identified in this study corroborated findings of earlier studies. Conversely, areas not reported in previous studies as affected were identified, and these areas showed a reverse relationship, i.e., highly impacted cypresstupelo and low or moderately impacted hardwoods. Additionally, generated proportions of hardwood, cypress-tupelo, and open (mixed) forests per each 1-km pixel (impact and recovery maps) suggest that regions containing higher percentages of cypress-tupelos were more likely to have sustained higher impacts. Visual examination of the impact map revealed a spatial covariation between increased impact magnitudes and river corridors dominated by open forest. This spatial association was corroborated by examining changes in the percentage of open forest per 1-km impact pixel; the percentage of open forest peaked at moderate to high impacts. The distribution of recovery supported the impact spatial distribution; however, the magnitudes of the two indicators of hurricane effects were not always spatially dependent. Converse to univariate statistics describing a11 forested area within the basin, higher recoveries tended to be related to higher percentages of hardwoods. Lower recoveries, on the other hand, tended to be related to forests with nearly equal percentages of hardwoods and cypress-tupelo.

Louisiana↗
USGS1976

Thermographic mosaic of Yellowstone National Park

An uncontrolled thermographic mosaic, which covers most of the area of Yellowstone National Park, has been compiled. The recording of aerial thermographic data on videotape is established as one of the prerequisites for the preparation of more accurate mosaics. Post-mission processing of the videotape record can rectify the nadir line to a topographic map base, correct for v/h variations in adjacent flight lines, correct for yaw distortions, rectify distortions caused by pitch, and rectify distortions produced by non-linearity of the side-wise scan. Installation of a thermal infrared scanning radiometer in a gyrostabilized mount and post-mission processing of the videotape record (principally rectification of side-wise scan distortion) would yield a controlled, photogrammetrically accurate thermographic mosaic. However, the techniques used in the preparation of the uncontrolled thermographic mosaic of Yellowstone National Park can be immediately applied to the preparation of regional thermographic mosaics, important to geologists and other scientists and engineers in studies of geothermal and volcanic areas, and to other types of environmental investigations such as pollution studies of large water bodies (e.g., harbors, estuaries, lakes, etc.), where a precise planimetric image is not critical.

Idaho;Montana;Wyoming↗
USGS2003

Cartographic services contract...for everything geographic

The U.S. Geological Survey's (USGS) Cartographic Services Contract (CSC) is used to award work for photogrammetric and mapping services under the umbrella of Architect-Engineer (A&E) contracting. The A&E contract is broad in scope and can accommodate any activity related to standard, nonstandard, graphic, and digital cartographic products. Services provided may include, but are not limited to, photogrammetric mapping and aerotriangulation; orthophotography; thematic mapping (for example, land characterization); analog and digital imagery applications; geographic information systems development; surveying and control acquisition, including ground-based and airborne Global Positioning System; analog and digital image manipulation, analysis, and interpretation; raster and vector map digitizing; data manipulations (for example, transformations, conversions, generalization, integration, and conflation); primary and ancillary data acquisition (for example, aerial photography, satellite imagery, multispectral, multitemporal, and hyperspectral data); image scanning and processing; metadata production, revision, and creation; and production or revision of standard USGS products defined by formal and informal specification and standards, such as those for digital line graphs, digital elevation models, digital orthophoto quadrangles, and digital raster graphics.

Fact Sheet↗
USGS2003

Topographic map of the northwest Loire Valles region of Mars MTM 500k -15/337E OMKT

This map, compiled photogrammetrically from Viking Orbiter stereo image pairs, is part of a series of topographic maps of areas of special scientific interest on Mars. MTM 500k –15/337E OMKT: Abbreviation for Mars Transverse Mercator; 1:500,000 series; center of sheet latitude 15° S., longitude 337.5° E. in planetocentric coordinate system (this corresponds to –15/022; latitude 15° S., longitude 22.5° W. in planetographic coordinate system); orthophotomosaic (OM) with color coded (K) topographic contours and nomenclature (T) [Greeley and Batson, 1990]. The figure of Mars used for the computation of the map projection is an oblate spheroid (flattening of 1/176.875) with an equatorial radius of 3396.0 km and a polar radius of 3376.8 km (Kirk and others, 2000). The datum (the 0–km contour line) for elevations is defined as the equipotential surface (gravitational plus rotational) whose average value at the equator is equal to the mean radius as determined by Mars Orbiter Laser Altimeter (Smith and others, 2001). The image base for this map employs Viking Orbiter images from orbit 651. An orthophotomosaic was created on the digital photogrammetric workstation using the DTM compiled from stereo models. Integrated Software for Imagers and Spectrometers (ISIS) (Torson and Becker, 1997) provided the software to project the orthophotomosaic into the Transverse Mercator Projection.

IMAP↗
USGS2003

Topographic map of the Southeast Loire Valles region of Mars MTM 500k -20/347E OMKT

This map, compiled photogrammetrically from Viking Orbiter stereo image pairs, is part of a series of topographic maps of areas of special scientific interest on Mars. MTM 500k –20/347E OMKT: Abbreviation for Mars Transverse Mercator; 1:500,000 series; center of sheet latitude 20° S., longitude 347.5° E. in planetocentric coordinate system (this corresponds to –20/012; latitude 20° S., longitude 12.5° W. in planetographic coordinate system); orthophotomosaic (OM) with color coded (K) topographic contours and nomenclature (T) [Greeley and Batson, 1990]. The figure of Mars used for the computation of the map projection is an oblate spheroid (flattening of 1/176.875) with an equatorial radius of 3396.0 km and a polar radius of 3376.8 km (Kirk and others, 2000). The datum (the 0–km contour line) for elevations is defined as the equipotential surface (gravitational plus rotational) whose average value at the equator is equal to the mean radius as determined by Mars Orbiter Laser Altimeter (Smith and others, 2001). The image base for this map employs Viking Orbiter images from orbit 651. An orthophotomosaic was created on the digital photogrammetric workstation using the DTM compiled from stereo models. Integrated Software for Imagers and Spectrometers (ISIS) (Torson and Becker, 1997) provided the software to project the orthophotomosaic into the Transverse Mercator Projection.

IMAP↗