Search USGS⌕ Search

SEARCH · Search USGS

Results for “Journal of Interpretation Research”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11Linked to original sources
USGS2017

Surface morphology of caldera-forming eruption deposits revealed by lidar mapping of Crater Lake National Park, Oregon- Implications for emplacement and surface modification

Large explosive eruptions of silicic magma can produce widespread pumice fall, extensive ignimbrite sheets, and collapse calderas. The surfaces of voluminous ignimbrites are rarely preserved or documented because most terrestrial examples are heavily vegetated, or severely modified by post-depositional processes. Much research addresses the internal sedimentary characteristics, flow processes, and depositional mechanisms of ignimbrites, however, surface features of ignimbrites are less well documented and understood, except for comparatively small-volume deposits of historical eruptions. The ~7,700 calendar year B.P. climactic eruption of Mount Mazama, USA vented ~50 km3 of magma, deposited first as rhyodacite pumice fall and then as a zoned rhyodacite-to-andesite ignimbrite as Crater Lake caldera collapsed. Lidar collected during summer 2010 reveals the remarkably well-preserved surface of the Mazama ignimbrite and related deposits surrounding Crater Lake caldera in unprecedented detail despite forest cover. The ±1 m lateral and ±4 cm vertical resolution lidar allows surface morphologies to be classified. Surface morphologies are created by internal depositional processes and can point to the processes at work when pyroclastic flows come to rest. We describe nine surface features including furrow-ridge sets and wedge-shaped mounds in pumice fall eroded by high-energy pyroclastic surges, flow- parallel ridges that record the passage of multiple pyroclastic flows, perched benches of marginal deposits stranded by more-mobile pyroclastic-flow cores, hummocks of dense clasts interpreted as lag deposit, transverse ridges that mark the compression and imbrication of flows as they came to rest, scarps indicating ignimbrite remobilization, fields of pit craters caused by phreatic explosions, fractures and cracks caused by extensional processes resulting from ignimbrite volume loss, and stream channels eroded in the newly formed surface. The nine morphologies presented here illustrate a dynamic depositional environment that varied spatially and with time during the eruption, and show that multiple processes modified the ignimbrite after deposition, both during and after the eruption.

Oregon↗
USGS2013

Development of a reproducible method for determining quantity of water and its configuration in a marsh landscape

Coastal Louisiana is a dynamic and ever-changing landscape. From 1956 to 2010, over 3,734 km 2 of Louisiana's coastal wetlands have been lost due to a combination of natural and human-induced activities. The resulting landscape constitutes a mosaic of conditions from highly deteriorated to relatively stable with intact landmasses. Understanding how and why coastal landscapes change over time is critical to restoration and rehabilitation efforts. Historically, changes in marsh pattern (i.e., size and spatial distribution of marsh landmasses and water bodies) have been distinguished using visual identification by individual researchers. Difficulties associated with this approach include subjective interpretation, uncertain reproducibility, and laborious techniques. In order to minimize these limitations, this study aims to expand existing tools and techniques via a computer-based method, which uses geospatial technologies for determining shifts in landscape patterns. Our method is based on a raster framework and uses landscape statistics to develop conditions and thresholds for a marsh classification scheme. The classification scheme incorporates land and water classified imagery and a two-part classification system: (1) ratio of water to land, and (2) configuration and connectivity of water within wetland landscapes to evaluate changes in marsh patterns. This analysis system can also be used to trace trajectories in landscape patterns through space and time. Overall, our method provides a more automated means of quantifying landscape patterns and may serve as a reliable landscape evaluation tool for future investigations of wetland ecosystem processes in the northern Gulf of Mexico.

Louisiana↗
USGS2026

What is the (real) rate of soil health practice adoption? Making sense of three data sources

Conservation stakeholders looking to quantify the impact of their investments to increase soil health practice adoption over time often face challenges in interpreting practice adoption data due to discrepancies in language and results among data sources. Similarly, efforts to estimate environmental outcomes of practice adoption, such as water quality and greenhouse gas emissions, can vary depending on different practice adoption input data. To help make sense of different adoption data sources, we compared county-level adoption data for winter cover crops (WCC), no-till (NT), and reduced tillage (RT) in three areas of the United States with contrasting climates and production systems: central Illinois (CIL), southern Illinois (SIL), and western New York (WNY). We analyzed data available during 2015 through 2022 from the Operational Tillage Information System (OpTIS, remote sensing), US Census of Agriculture (AgCensus, a farmer survey), and, specifically in Illinois, the Illinois Soil Conservation Transect Survey (Transect, a roadside survey). The magnitude of differences between the datasets depended on the practice and geographic location. For example, OpTIS and AgCensus tillage data were much more similar in Illinois (average difference of less than 4 percentage points) compared to New York (average differences of 20 percentage points). Similarly, there was less variability and smaller differences between OpTIS and AgCensus WCC data in Illinois compared to WNY. AgCensus tended to report lower WCC adoption for Illinois and greater adoption in WNY compared to OpTIS. All data sources agreed that the rate of change in tillage practices is slow (mainly –1% to 1%) and that adoption of WCC is low (assuming linear growth, it could take nearly a century to reach 50% WCC adoption in CIL). Differences among the datasets were attributed to definitional inconsistencies for RT and NT and how WCC data were acquired. For example, the AgCensus asks if a WCC was planted, whereas OpTIS and Transect evaluate the presence of a standing WCC. Data sources also reflect different time periods (calendar years or crop years) and types of cropland assessed (corn [ Zea mays L.], soybean [ Glycine max {L.} Merr.], or all cropland). We propose two recommendations to improve interpretation and consistency: (1) a working group to harmonize definitions and protocols and develop educational materials for data users, and (2) a research effort that integrates different adoption data types and produces publicly available adoption data at HUC-10 and county scales. Such activities could help improve data access and utility for evidence-based conservation decision-making and enhance the accuracy of environmental models that rely on adoption data as input.

Journal of Soil and Water Conservation↗
USGS1989

The Animal Welfare Act and the zoo: A positive approach

Interpretations of the Animal Welfare Act and other regulations governing use of research animals in the United States are changing. Recent amendments to the Act have resulted in the inclusion of more species under the umbrella of regulation. The role of the zoo and wildlife veterinarian should be that of leading his or her institution into a positive endorsement of these regulations and their application. Recent additions to the Code of Federal Regulations spell out the roles of the veterinarian and the Animal Care and Use Committee at an institution.

Journal of Zoo and Wildlife Medicine↗
USGS1997

Three-dimensional upper crustal velocity structure beneath San Francisco Peninsula, California

This paper presents new seismic data from, and crustal models of the San Francisco Peninsula. In much of central California the San Andreas fault juxtaposes the Cretaceous granitic Salinian terrane on its west and the Late Mesozoic/Early Tertiary Franciscan Complex on its east. On San Francisco Peninsula, however, the present-day San Andreas fault is completely within a Franciscan terrane, and the Pilarcitos fault, located southwest of the San Andreas, marks the Salinian-Franciscan boundary. This circumstance has evoked two different explanations: either the Pilarcitos is a thrust fault that has pushed Franciscan rocks over Salinian rocks or the Pilarcitos is a transform fault that has accommodated significant right-lateral slip. In an effort to better resolve the subsurface structure of the peninsula faults, we established a temporary network of 31 seismographs arrayed across the San Andreas fault and the subparallel Pilarcitos fault at ∼1–2 km spacings. These instruments were deployed during the first 6 months of 1995 and recorded local earthquakes, air gun sources set off in San Francisco Bay, and explosive sources. Travel times from these sources were used to augment earthquake arrival times recorded by the Northern California Seismic Network and were inverted for three-dimensional velocity structure. Results show lateral velocity changes at depth (∼0.5–7 km) that correlate with downward vertical projections of the surface traces of the San Andreas and Pilarcitos faults. We thus interpret the faults as high-angle to vertical features (constrained to a 70°–110° dip range). From this we conclude that the Pilarcitos fault is probably an important strike-slip fault that accommodated much of the right-lateral plate boundary strain on the peninsula prior to the initiation of the modern-day San Andreas fault in this region sometime after about 3.0 m.y. ago.

Journal of Geophysical Research B: Solid Earth↗
USGS2022

Rock alteration mapping in and around fossil shallow intrusions at Mt. Ruapehu New Zealand with laboratory and aerial hyperspectral imaging

Diagnostic absorption features in hyperspectral data can be used to identify a specific mineral or mineral associations. However, it is unknown how accurate hyperspectral mapping can be for identifying alteration mineral compositions at the resolution required to describe structures such as fossil intrusions, or whether it can accurately quantify the alteration present. This study compared petrographic observation with visible, near-infrared (VNIR), and shortwave infrared (SWIR) hyperspectral remote sensing at laboratory- (centimetre-scale) and aerial- (metre-scale) scales to characterise the abundance of surface hydrothermal rock alteration in and around a shallow fossil intrusion on Pinnacle Ridge, Mt. Ruapehu, New Zealand. We classified a high-resolution aerial hyperspectral image to develop a new surface alteration map using Spectral Angle Mapper (SAM) algorithm. The petrographic thin-section and the laboratory and aerial hyperspectral imaging revealed a spectrum of hydrous alteration phases as indicated by the presence of an absorption feature at 2207 nm. Moderate correlation exists between the depth of the absorption feature at 2207 nm and the point counting-derived alteration percent values, indicating reliability of laboratory-based hyperspectral analytical methods. In contrast, aerial hyperspectral data failed to provide any clear correlations to field-mapped alteration using a band-depth approach, and we interpret this due to ‘oversampling’ of surface (supergene) alteration, spectral mixing, and sensor limitations (e.g., bandwidth, signal-to-noise ratio). The hyperspectral image-derived alteration map, created using supervised image classification, can loosely be translated to a geotechnical map where porosity and permeability play a major role in localizing hydrothermal fluid flow and the formation of alteration mineral associations.

Mt. Ruapehu↗
USGS1997

Sedimentary history and mass flow structures of Chryse and Acidalia Planitiae, Mars

Geologic mapping and crater counting in Chryse and Acidalia Planitiae (GAP) reveal five major sedimentary deposits of Hesperian to Early Amazonian age, including (1) a mass flow deposited during the Early Hesperian near Deuteronilus Mensae (northeast of the map region) that may have resulted from the carving of Kasei Valles, >3000 km southwest of the exposed part of the deposit; (2) knobby plains material consisting of channel (likely; from Simud and Tiu Valles and possibly Ares and Shalbatana Valles) and mass-wasting deposits in central and eastern CAP; (3) material largely from Maja and Ares Valles emplaced in at least western and southern CAP (outcrops in southern Chryse Planitia developed thermokarst); (4) a thin mass flow covering much of southern Chryse Planitia that emanated from Simud and Tiu Valles; and (5) a thick, extensive (perhaps >3500 km across) mass flow deposit in central and northern CAP derived from accumulation and backflow of the preceding thin mass flow or perhaps melting of polar deposits. Other possible deposits may not be recognizable owing to burial by younger materials or a lack of morphologic signature. Various associated landforms appear to be consistent with the mass flow interpretations, including lobate and linear scarps along deposit edges, fractures related to desiccation of thick sediments, troughs, and ridges near the edges of the deposit indicative of secondary mass movement and deformation, pitted domes and fissure-fed flows possibly formed by sedimentary (mud) eruptions, and longitudinal channel grooves perhaps formed by roller vortices. No convincing evidence for paleoshorelines or stagnant ice sheets is found in CAP. These findings suggest that mass flow and hyperconcentrated flooding may have been the predominant processes of outflow-channel dissection in CAP. Elsewhere in the northern plains, similar landforms are prevalent. The mass flow interpretation does not require either multiple episodes of extraordinarily high water-discharge rates achieved by freeing huge volumes of water from the crust, repetitive recycling of immense volumes of water into highland aquifers at the heads of Chryse channels, or profound climate change. Mars Pathfinder will most likely land on and inspect the surface of the thin mass flow that originated from the canyons of Simud and Tiu Valles.

Journal of Geophysical Research E: Planets↗
USGS2012

Recent movement on the Garlock Fault as suggested by water level fluctuations in a well in Fremont Valley, California

Water levels have been continuously recorded since March 1978 in a well in Fremont Valley, where several strands of the adjacent Garlock fault zone have exhibited both left-lateral displacement and components of normal displacement. Differences in water levels indicate that a fault segment lies between the observation well and a nearby irrigation well. During the 4-year recording period, six sharp fluctuations, or “spikes,” were noted. These fluctuations, occurring over 2- to 4-day periods, have amplitudes of 15–30 cm. They appear to be the result of creep events on a nearby fault. Two types of creep events are plausible: (1) normal slip on an en echelon trace of the Garlock fault less than 300 m south of the well, with the north side up relative to Fremont Valley or (2) left-lateral slip on the same fault. Because of the nature of the fluctuations we favor the latter interpretation. Dislocation models utilizing exponential, arc tangent, and skewed cosine functions were used to analyze the water level fluctuations, associated pressure distribution, and fault displacements. The results suggest that creep on the fault ranges from several millimeters to a centimeter for individual events. Estimates of cumulative creep for the period 1978–1982 range from 20 to 50 mm, depending on the particular model employed.

Journal of Geophysical Research Solid Earth↗
USGS2024

Diel temperature signals track seasonal shifts in localized groundwater contributions to headwater streamflow generation at network scale

Groundwater contributions to streamflow sustain aquatic ecosystem resilience; streams without significant groundwater inputs often have well-coupled air and water temperatures that degrade cold-water habitat during warm low flow periods. Widespread uncertainty in stream-groundwater connectivity across space and time has created disparate predictions of energy and nutrient fluxes across headwater networks, hindering predictions of cold-water habitat resilience under climate change scenarios. Recently, annual paired air and water temperature signals have been harnessed to indicate stream water thermal sensitivity and the dominance of deep versus shallow groundwater influence, although the utility of diel air–water temperature signal metrics for hydrologic inference has remained unexplored. Here we analyzed two consecutive years of locally paired, air–water temperature data from 47 headwater stream sites in the Catskill Mountains, New York, USA, and discovered characteristic seasonal patterns in diel temperature signal sinusoid metrics (amplitude ratio, phase lag, and mean ratio) driven by shifts in streamflow generation mechanisms and stream network position. Hydrologic interpretations of observed patterns were supported by stream heat budget model scenarios and additional analysis of paired air–water temperature data from two streams in Shenandoah National Park, Virginia, USA, with well characterized stream-groundwater connectivity. We found that within smaller tributaries, streamflow generation transitions from runoff to groundwater dominance were driven by hillslope drying during seasonal periods of lower precipitation. This was evidenced by significant correlations (p < 0.01) between daily water:air temperature signal amplitudes (non-linear decreases of ∼ 50 %) and derived base-flow index at 22 of the 28 sites, indicating enhanced local groundwater influence on streamflow promotes decoupling of diel air–water temperature signals. Additionally, ratios between daily water:air temperature signal means were lower in tributaries (∼0.68) when compared to main-stem (∼0.8) sites, increasing linearly throughout the observational period. In conceptual stream heat budget models, groundwater inflow had minimal effects on daily phase lags (∼0.2 hr), but increases in fractional groundwater discharge (0–50 %) depressed daily amplitude (∼20 % to 50 %) and mean ratios (∼15 %), supporting the sensitivity of daily metrics to interpreted changes in seasonal groundwater contributions to streamflow. During observational periods (i.e., April through October 2021 and 2022), significant differences (p < 0.01) between tributary and main-stem air–water metrics occurred when base-flow contributions were highest (∼0.93 vs. ∼ 0.68), as sites lower in the network had daily temperature metrics dominated by stream channel thermal inertia, rather than local groundwater connectivity, showing enhanced air–water diel signal coupling during warmer, drier periods. Divergent air temperature coupling across the network was interpreted as being driven by distance from local groundwater source zones, additional lateral groundwater inflows do not contribute a meaningful fraction to channel discharge lower in the network. Given the growing footprint of stream temperature observations, diel air–water temperature signals can provide distributed metrics sensitive to upstream groundwater discharge. Consequently, these metrics can support ongoing efforts by resource managers and researchers seeking to forecast the resilience of cold-water habitat to climate warming and changing precipitation regimes in mountain headwater streams.

New York, Virginia↗
USGS1991

New evidence on the hydrothermal system in Long Valley caldera, California, from wells, fluid sampling, electrical geophysics, and age determinations of hot-spring deposits

Data collected since 1985 from test drilling, fluid sampling, and geologic and geophysical investigations provide a clearer definition of the hydrothermal system in Long Valley caldera than was previously available. This information confirms the existence of high-temperature (> 200??C) reservoirs within the volcanic fill in parts of the west moat. These reservoirs contain fluids which are chemically similar to thermal fluids encountered in the central and eastern parts of the caldera. The roots of the present-day hydrothermal system (the source reservoir, principal zones of upflow, and the magmatic heat source) most likely occur within metamorphic basement rocks beneath the western part of the caldera. Geothermometer-temperature estimates for the source reservoir range from 214 to 248??C. Zones of upflow of hot water could exist beneath the plateau of moat rhyolite located west of the resurgent dome or beneath Mammoth Mountain. Lateral flow of thermal water away from such upflow zones through reservoirs in the Bishop Tuff and early rhyolite accounts for temperature reversals encountered in most existing wells. Dating of hot-spring deposits from active and inactive thermal areas confirms previous interpretations of the evolution of hydrothermal activity that suggest two periods of extensive hot-spring discharge, one peaking about 300 ka and another extending from about 40 ka to the present. The onset of hydrothermal activity around 40 ka coincides with the initiation of rhyolitic volcanism along the Mono-Inyo Craters volcanic chain that extends beneath the caldera's west moat. ?? 1991.

Journal of Volcanology and Geothermal Research↗
USGS1974

Lunar highlands volcanism implications from Luna 20 and Apollo 16

Highlands materials sampled at the Apollo 16 and Luna 20 sites represent units of distinctive morphology that are widespread on the lunar nearside. Samples from the Apollo 16 site represent hilly and furrowed materials of the Descartes highlands and Cayley Formation. Materials were collected by Luna 20 from terrain resembling the Descartes terrain. Most photogeologic interpretations of these units favored volcanic origins, but the samples fail to support this interpretation. Luna 20 soil fragments are mainly glassy microbreccia with lithic inclusions of fine-grained hornfels; less than 3 percent of the fragments have textures of volcanic rocks, and most of these are likely crystalline products of impact melting. Apollo 16 soils formed on ejecta derived from a plutonic anorthosite-norite-troctolite suite. The similarity of Luna 20 soils indicates that these too formed as regolith on ejecta of anorthosite-norite-troctolitc composition. Interpretation of the samples from the two locations now suggests that hilly and furrowed terrains, previously thought to be of volcanic origin, are impact ejecta; in view of the plutonic nature of the source rocks and their extensive fusion and metamorphism, it is likely that the ejecta were derived from multiring basins. At one point, the Apollo 16 site, the Cayley Formation is composed of basin ejecta.

Journal of Research of the U.S. Geological Survey↗
USGS2010

Policies and practices of beach monitoring in the Great Lakes, USA: a critical review

Beaches throughout the Great Lakes are monitored for fecal indicator bacteria (typically Escherichia coli) in order to protect the public from potential sewage contamination. Currently, there is no universal standard for sample collection and analysis or results interpretation. Monitoring policies are developed by individual beach management jurisdictions, and applications are highly variable across and within lakes, states, and provinces. Extensive research has demonstrated that sampling decisions for time, depth, number of replicates, frequency of sampling, and laboratory analysis all influence the results outcome, as well as calculations of the mean and interpretation of the results in policy decisions. Additional shortcomings to current monitoring approaches include appropriateness and reliability of currently used indicator bacteria and the overall goal of these monitoring programs. Current research is attempting to circumvent these complex issues by developing new tools and methods for beach monitoring. In this review, we highlight the variety of sampling routines used across the Great Lakes and the extensive body of research that challenges comparisons among beaches. We also assess the future of Great Lakes monitoring and the advantages and disadvantages of establishing standards that are evenly applied across all beaches.

Great Lakes↗
USGS2011

Variations in eruption style during the 1931 A.D. eruption of Aniakchak volcano, Alaska

The 1931 A.D. eruption of Aniakchak volcano, Alaska, progressed from subplinian to effusive eruptive style and from trachydacite to basaltic andesite composition from multiple vent locations. Eyewitness accounts and new studies of deposit stratigraphy provide a combined narrative of eruptive events. Additional field, compositional, grain size, componentry, density, and grain morphology data document the influences on changing eruptive style as the eruption progressed. The eruption began on 1 May 1931 A.D. when a large subplinian eruption column produced vesicular juvenile-rich tephra. Subsequent activity was more intermittent, as magma interacted with groundwater and phreatomagmatic ash and lithic-rich tephra was dispersed up to 600 km downwind. Final erupted products were more mafic in composition and the eruption became more strombolian in style. Stratigraphic evidence suggests that two trachydacitic lava flows were erupted from separate but adjacent vents before the phreatomagmatic phase concluded and that basaltic andesite lava from a third vent began to effuse near the end of explosive activity. The estimated total bulk volume of the eruption is 0.9 km 3 , which corresponds to approximately 0.3 km 3 of magma. Eruption style changes are interpreted as follows: (1) a decrease in magma supply rate caused the change from subplinian to phreatomagmatic eruption; (2) a subsequent change in magma composition caused the transition from phreatomagmatic to strombolian eruption style. Additionally, the explosion and effusion of a similar magma composition from three separate vents indicates how the pre-existing caldera structure controlled the pathway of shallow magma ascent, thus influencing eruption style.

Alaska↗
USGS2017

Interactions of estuarine shoreline infrastructure with multiscale sea level variability

Sea level rise increases the risk of storms and other short‐term water‐rise events, because it sets a higher water level such that coastal surges become more likely to overtop protections and cause floods. To protect coastal communities, it is necessary to understand the interaction among multiday and tidal sea level variabilities, coastal infrastructure, and sea level rise. We performed a series of numerical simulations for San Francisco Bay to examine two shoreline scenarios and a series of short‐term and long‐term sea level variations. The two shoreline configurations include the existing topography and a coherent full‐bay containment that follows the existing land boundary with an impermeable wall. The sea level variability consists of a half‐meter perturbation, with duration ranging from 2 days to permanent (i.e., sea level rise). The extent of coastal flooding was found to increase with the duration of the high‐water‐level event. The nonlinear interaction between these intermediate scale events and astronomical tidal forcing only contributes ∼1% of the tidal heights; at the same time, the tides are found to be a dominant factor in establishing the evolution and diffusion of multiday high water events. Establishing containment at existing shorelines can change the tidal height spectrum up to 5%, and the impact of this shoreline structure appears stronger in the low‐frequency range. To interpret the spatial and temporal variability at a wide range of frequencies, Optimal Dynamic Mode Decomposition is introduced to analyze the coastal processes and an inverse method is applied to determine the coefficients of a 1‐D diffusion wave model that quantify the impact of bottom roughness, tidal basin geometry, and shoreline configuration on the high water events

Journal of Geophysical Research: Oceans↗
USGS2009

A preliminary study of older hot spring alteration in Sevenmile Hole, Grand Canyon of the Yellowstone River, Yellowstone Caldera, Wyoming

Erosion in the Grand Canyon of the Yellowstone River, Yellowstone Caldera (640 ka), Wyoming, has exposed a cross section of older hydrothermal alteration in the canyon walls. The altered outcrops of the post-collapse tuff of Sulphur Creek (480 ka) extend from the canyon rim to more than 300 m beneath it. The hydrothermal minerals are zoned, with an advanced argillic alteration consisting of an association of quartz (opal) + kaolinite ± alunite ± dickite, and an argillic or potassic alteration association with quartz + illite ± adularia. Disseminated fine-grained pyrite or marcasite is ubiquitous in both alteration types. These alteration associations are characteristic products of shallow volcanic epithermal environments. The contact between the two alteration types is about 100 m beneath the rim. By analogy to other active geothermal systems including active hydrothermal springs in the Yellowstone Caldera, the transition from kaolinite to illite occurred at temperatures in the range 150 to 170 °C. An 40 Ar/ 39 Ar age on alunite of 154,000 ± 16,000 years suggests that hydrothermal activity has been ongoing since at least that time. A northwest-trending linear array of extinct and active hot spring centers in the Sevenmile Hole area implies a deeper structural control for the upflowing hydrothermal fluids. We interpret this deeper structure to be the Yellowstone Caldera ring fault that is covered by the younger tuff of Sulphur Creek. The Sevenmile Hole altered area lies at the eastern end of a band of hydrothermal centers that may mark the buried extension of the Yellowstone Caldera ring fault across the northern part of the Caldera.

Wyoming↗
USGS1996

Stress/strain changes and triggered seismicity at The Geysers, California

The principal results of this study of remotely triggered seismicity in The Geysers geothermal field are the demonstration that triggering (initiation of earthquake failure) depends on a critical strain threshold and that the threshold level increases with decreasing frequency, or, equivalently, depends on strain rate. This threshold function derives from (1) analyses of dynamic strains associated with surface waves of the triggering earthquakes, (2) statistically measured aftershock zone dimensions, and (3) analytic functional representations of strains associated with power production and tides. The threshold is also consistent with triggering by static strain changes and implies that both static and dynamic strains may cause aftershocks. The observation that triggered seismicity probably occurs in addition to background activity also provides an important constraint on the triggering process. Assuming the physical processes underlying earthquake nucleation to be the same, Gomberg [this issue] discusses seismicity triggered by the M W 7.3 Landers earthquake, its constraints on the variability of triggering thresholds with site, and the implications of time delays between triggering and triggered earthquakes. Our results enable us to reject the hypothesis that dynamic strains simply nudge prestressed faults over a Coulomb failure threshold sooner than they would have otherwise. We interpret the rate-dependent triggering threshold as evidence of several competing processes with different time constants, the faster one(s) facilitating failure and the other(s) inhibiting it. Such competition is a common feature of theories of slip instability. All these results, not surprisingly, imply that to understand earthquake triggering one must consider not only simple failure criteria requiring exceedence of some constant threshold but also the requirements for generating instabilities.

Journal of Geophysical Research B: Solid Earth↗
USGS2010

Glimpses of East Antarctica: Aeromagnetic and satellite magnetic view from the central Transantarctic Mountains of East Antarctica

Aeromagnetic and satellite magnetic data provide glimpses of the crustal architecture within the Ross Sea sector of the enigmatic, ice-covered East Antarctic shield critical for understanding both global tectonic and climate history. In the central Transantarctic Mountains (CTAM), exposures of Precambrian basement, coupled with new high-resolution magnetic data, other recent aeromagnetic transects, and satellite magnetic and seismic tomography data, show that the shield in this region comprises an Archean craton modified both by Proterozoic magmatism and early Paleozoic orogenic basement reactivation. CTAM basement structures linked to the Ross Orogeny are imaged 50–100 km farther west than previously mapped, bounded by inboard upper crustal Proterozoic granites of the Nimrod igneous province. Magnetic contrasts between craton and rift margin sediments define the Neoproterozoic rift margin, likely reactivated during Ross orogenesis and Jurassic extension. Interpretation of satellite magnetic and aeromagnetic patterns suggests that the Neoproterozoic rift margin of East Antarctica is offset by transfer zones to form a stepwise series of salients tracing from the CTAM northward through the western margin of the Wilkes Subglacial Basin to the coast at Terre Adélie. Thinned Precambrian crust inferred to lie east of the rift margin cannot be imaged magnetically because of modification by Neoproterozoic and younger tectonic events.

Journal of Geophysical Research B: Solid Earth↗
USGS2012

Structural analysis of the southern Peninsular, southern Wrangellia, and northern Chugach terranes along the Trans-Alaska Crustal Transect, northern Chugach Mountains, Alaska

Structural and tectonic analysis of the southern Peninsular, southern Wrangellia, and northern Chugach terranes, along the Trans-Alaska Crustal Transect in the northern Chugach Mountains documents a long succession of Early Jurassic through Cenozoic deformational events. The deformational events are generally characterized by distinctive structural fabrics and metamorphisms. Most of the events are interpreted to be related to subduction-related accretion or terrane accretion along the Border Ranges fault system (BRFS) and companion faults, and the Contact fault system (CFS). Each period of subduction-related accretion consisted of underplating of the outboard unit beneath the adjacent inboard unit. The fabric associated with each subduction-related accretion consisted of folding, intense shearing, and local rolling of planar structures. Age and structural relationships suggest migration of the zone of subduction-related accretion from the BRFS to the north, through each accreting unit, to younger bounding thrust faults to the south. Other older and younger deformational events are also recognized and are interpreted to have formed before and after, respectively, accretions along the BRFS and CFS. The main younger deformational events are (1) early Tertiary north verging folding of portions of the northern Chugach and southern Wrangellia terranes and (2) broad folding and rotation of major and minor structures related to subduction-related accretion or terrane accretion during early and middle Tertiary oroclinal bending of Alaska.

Journal of Geophysical Research Solid Earth↗