Search USGS⌕ Search

SEARCH · Search USGS

Results for “Journal of Geophysical Research- Solid Earth”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11Linked to original sources
USGS2012

Early Cretaceous paleolatitude of the Yukon-Koyukuk province, Alaska

We report results from a paleomagnetic study of the Yukon-Koyukuk province, a key region for reconstructing the Cretaceous paleogeography of northern Alaska and northeastern Asia. The province lies between the displaced continental fragment of Arctic Alaska and the accreted terranes of southern Alaska. Although Lower Cretaceous volcanogenic rocks of the Yukon-Koyukuk province preserve primary remanent magnetizations, the primary component is masked by a pervasive overprint. The over-printing magnetization, which has dual polarity, was acquired after a Late Cretaceous orogeny left the region highly deformed. By fitting planes to tilt-corrected thermal demagnetization data and solving for the best intersection of the corresponding remagnetization circles, we separated the primary component, presumably a vestige of the original thermoremanent magnetization, from the overprinting component of the natural remanence. The primary magnetization corresponds to a mean paleopole of Early Cretaceous age at 60.2°N, 159°E. The mean paleolatitude is 69°N with the 95% confidence ellipse ranging from 60° to 75°N. This analysis was successful because the tilt corrections of the sampled strata had sufficient variation to ensure a strong intersection of the remagnetization circles. We infer that Lower Cretaceous rocks of the Brooks Range and the Yukon-Koyukuk province were once separated by a wide ocean basin that was closed by subduction, probably during the Cretaceous. The northern limb of the Angayucham terrane, which lies between the Brooks Range and the Yukon-Koyukuk province, may contain remnants of the now-closed ocean basin.

Journal of Geophysical Research Solid Earth↗
USGS2012

Analysis of geophysical well logs obtained in the State 2-14 borehole, Salton Sea geothermal area, California

A complete suite of conventional geophysical well logs was obtained in the upper part of a 3220-m- deep borehole drilled into geothermally altered alluvial sediments on the southeastern edge of the Salton Sea. In situ temperatures greater than 300°C and an inability to cool parts of the borehole by circulation limited the suite of logs run below 2000 m in depth to deep induction, spontaneous potential, un-calibrated neutron, natural gamma, and temperature. Bottom-hole temperature trends given by repeat temperature logs were extrapolated to undisturbed temperatures approaching 355°C at a depth of 3220 m. Geophysical logs obtained in the State 2–14 borehole indicate that neutron porosity, gamma-gamma, and deep-induction logs provide useful information on lithologic trends with depth. The natural gamma log contains almost continuous, high-frequency fluctuations that obscure lithologic trends and that may be related to recent radioisotope redistribution and departure from radiometric equilibrium. Acoustic transit time logs give unrealistically low in situ compressional velocities ranging from 1.8 to 3.0 km/s, whereas acoustic waveform logs indicate that sediment compressional velocities range from less than 3.0 km/s shallower than 1000 m in depth to almost 5.0 km/s at depths greater than 2000 m. Analyses indicate that most log values lie between two lithologic end points: an electrically conductive claystone with moderate neutron porosity, but no effective porosity, and an electrically nonconductive, fully cemented siltstone that has small but finite porosity. A limited number of clean sandstones depart from this trend; geophysical logs from these sandstones indicate an effective porosity ranging from 5 to 14%, and saturation with brines having equivalent NaCl concentrations greater than 100,000 mg/L. Depth- averaged trends in neutron porosity and deep-induction logs, along with trends in acoustic velocity determined from acoustic waveform logs, demonstrate that major changes in the properties of alluvial sediments occur within the depth range from 1200 to 1800 m. Although caliper logs were not obtained deeper than 2000 m, resistivity values less than 10 ohm m at those depths probably correspond to borehole enlargements in production zones rather than local increases in effective porosity. The transition in sediment properties indicated by the geophysical logs in the depth interval from 1200 to 2000 m apparently represents a detailed vertical profile of the transition from relatively unaltered clay minerals in alluvial sediments to electrically nonconductive alteration products such as epidote and feldspar.

Journal of Geophysical Research Solid Earth↗
USGS2012

Thermal regime of the State 2-14 well, Salton Sea Scientific Drilling Project

Temperature logs were made repeatedly during breaks in drilling and both during and after flow tests in the Salton Sea Scientific Drilling Project well (State 2–14). The purpose of these logs was to assist in identifying zones of fluid loss or grain and to characterize reservoir temperatures. At the conclusion of the active phase of the project, a series of logs was begun in an attempt to establish the equilibrium temperature profile. Initially, we were able to log to depths below 3 km, but beginning in late May of 1986, it was impossible to log below about 1.8 km owing to casing failure. Our best estimates of formation temperature below 1.8 km are 305° ± 5°C at 1890 m and 355° ± 10°C at 3170 m. For the upper 1.8 km the latest temperature log (October 24, 1986), using a digital “slickline” (heat-shielded downhole recording) device, was within a few degrees Celsius of equilibrium, as confirmed by a more recent log (July 31, 1987) to a depth of ∼ 1 km. As in most other wells in the Salton Sea geothermal field, there is an impermeable, thermally conductive “cap” on the hydrothermal system; this cap extends to a depth of more than 900 m at the State 2–14 well. Thermal conductivities of 19 samples of drill cuttings from this interval were measured at room temperature. The conductivity values were corrected for in situ porosity as determined from geophysical logs and for the effects of elevated temperature. Thermal gradients decrease from about 250 mK m −1 (same as degrees Celsius per kilometer) in the upper few hundred meters to just below 200 mK m −1 near the base of the conductive cap. Using one interpretation, thermal conductivities increase with depth (mainly because of decreasing porosity), resulting in component heat flows that agree reasonably well with the mean of about 450 m W m −2 . This value agrees well with heat flow data from shallow wells within the Salton Sea geothermal field. A second interpretation, in which measured temperature coefficients of quartz- and carbonate-rich rocks are used to correct thermal conductivity, results in lower mean conductivities that are roughly constant with depth and, consequently, systematically decreasing heat flux averaging about 350 mW m −2 below 300 m. This interpretation is consistent with the inference (from fluid inclusion studies) that the rocks in this part of the field were once several tens of degrees Celsius hotter than they are now. The age of this possible disturbance is estimated at a few thousand years.

Journal of Geophysical Research Solid Earth↗
USGS2012

Principal component analysis of geodetically measured deformation in Long Valley caldera, eastern California, 1983-1987

Typical geodetic measurements of deformation consist of repeated surveys of a particular geodetic network. Such deformation data can be interpreted as a consequence of one or more self-coherent sources by means of principal component analysis. A self-coherent source is defined as any source that produces deformation that is time and space separable. Principal component analysis then gives the time and space factors that characterize the deformation attributed to each self-coherent source. Geodetic measurements of deformation at Long Valley caldera provide two examples of the application of principal component analysis. A 40-line trilateration network surrounding the caldera was surveyed in midsummer 1983, 1984, 1985, 1986, and 1987. Principal component analysis indicates that the observed deformation can be represented by a single coherent source. The time dependence for that source displays a rapid rate of deformation in 1983–1984 followed by less rapid but uniform rate in the 1984–1987 interval. The spatial factor seems consistent with expansion of a magma chamber beneath the caldera plus some shallow right-lateral slip on a vertical fault in the south moat of the caldera. An independent principal component analysis of the 1982, 1983, 1984, 1985, 1986, and 1987 leveling across the caldera requires two self-coherent sources to explain the deformation. The deformation pattern produced by the larger of these two sources appears to be roughly consistent with that found from the trilateration data. The deformation due to the second source is a nearly uniform tilt in the uplift profile. Presumably, that tilt is simply an artifact of systematic error in the leveling.

Journal of Geophysical Research Solid Earth↗
USGS2012

The growth of geological structures by repeated earthquakes: 2, Field examples of continental dip-slip faults

A strong test of our understanding of the earthquake cycle is the ability to reproduce extant fault-bounded geological structures, such as basins and ranges, which are built by repeated cycles of deformation. Along strike-slip faults, the coseismic and interseismic deformation can be nearly equal in magnitude and opposite in sign, resulting in little permanent deformation except for the fault offset. For dip-slip faults, portions of the crust are lifted and dropped, and so buoyancy forces are exerted. The seismic and interseismic deformations do not balance, and structures grow and become subject to erosion and deposition. We consider three examples for which the structure and fault geometry are well known: the White Wolf reverse fault in California, site of the 1952 Kern County M=7.3 earthquake, the Lost River normal fault in Idaho, site of the 1983 Borah Peak M=7.0 earthquake, and the Cricket Mountain normal fault in Utah, site of Quaternary slip events. Basin stratigraphy and seismic reflection records are used to profile the structure, and coseismic deformation measured by leveling surveys is used to estimate the fault geometry. To reproduce these structures, we add the deformation associated with the earthquake cycle (the coseismic slip and postseismic relaxation) to the flexure caused by the observed sediment load, treating the crust as a thin elastic plate overlying a fluid substrate. The cumulative deformation is principally dependent on the elastic plate thickness, modestly sensitive to the sediment-substrate density difference, and insensitive to the fluid viscosity for the 4- to 8-Ma structures. We deduce a longterm flexural rigidity of 2–15 × 10 19 Nm; this is equivalent to an elastic plate thickness of 2–4 km for a Young's modulus of 2.5 × 10 10 Nm −2 . This value is found where independent estimates of the elastic thickness from the coherence between surface topography and gravity yield values of about 4 km, but where coseismic fault slip extends to a depth of 10–15 km. Thus much of the seismogenic crust must weaken substantially during the life of active faults, causing the fault-bounded basins to narrow over time.

Journal of Geophysical Research Solid Earth↗
USGS2012

On the state of lithospheric stress in the absence of applied tectonic forces

Numerous published analyses of the nontectonic state of stress are based on Hooke's law and the boundary condition of zero horizontal deformation. This approach has been used to determine the gravitational stress state as well as the effects of processes such as erosion and temperature changes on the state of lithospheric stress. The major disadvantage of these analyses involves the assumption of lateral constraint which seems unrealistic in view of the observational fact that the crust can deform horizontally in response to applied loads. If the same problems are addressed by assuming that the remote stress state is constant, instead of the condition of zero horizontal deformation, then the resulting stress states are entirely different and in good accord with observations. In the absence of applied tectonic forces the only likely gravitational stress states are those for which all three principal stresses are nearly equal. To the contrary, the gravitational stress states developed on the basis of the lateral constraint assumption can be ruled out. The processes of erosion and sedimentation have slight tendencies to increase and decrease, respectively, the state of deviatoric stress. In particular, for initial stress states in the range of slightly extensional to compressional, erosion has the effect of enhancing the ratio of average horizontal to vertical stress, which may explain, at least in part, the common observation of high near-surface horizontal stresses. Temperature changes have only minor effects on the stress state, as averaged over the thickness of the lithosphere.

Journal of Geophysical Research Solid Earth↗
USGS2012

Vapor-dominated zones within hydrothermal systems: Evolution and natural state

Three conceptual models illustrate the range of hydrothermal systems in which vapor-dominated conditions are found. The first model (model I) represents a system with an extensive near-vaporstatic vapor-dominated zone and limited liquid throughflow and is analogous to systems such as The Geysers, California. Such systems can evolve within low-permeability barriers without changes in boundary conditions or rock properties, given an adequate supply of heat. Their scarcity in nature may be due to the need for a long-lived, potent heat source and for a low-permeability aureole that remains intact for significant lengths of time. Models II and III represent systems with significant liquid throughflow and include steam-heated discharge features at higher elevations and high-chloride springs at lower elevations, connected to and fed by a single circulation system at depth. In model II, as in model I, the vapor-dominated zone has a near-vaporstatic vertical pressure gradient and is generally underpressured with respect to local hydrostatic pressure. The vapor-dominated zone in model III is quite different, in that phase separation takes place at pressures close to local hydrostatic and the overall pressure gradient is near hydrostatic. A relatively large number of high-temperature systems in regions of moderate to great topographic relief are similar to either model II or model III; however, in most cases there are insufficient data to establish a single preferred model.

Journal of Geophysical Research Solid Earth↗
USGS2012

Geochemistry of some gases in hydrothermal fluids from the southern Juan de Fuca Ridge

Five samples of hydrothermal fluids from two vent areas on the southern Juan de Fuca Ridge were analyzed for dissolved gases. Concentrations in the end-member hydrothermal fluid of H 2 (270–527 μmol/kg), CH 4 (82–118 μmol/kg), and CO 2 (3920–4460 μmol/kg) are well above values in ambient seawater and are similar to concentrations reported for other ridge crest hydrothermal systems. The carbon isotopic ratios of the CH 4 (δ 13 C = −17.8 to −20.8) and CO 2 (δ 13 C = −3.6 to −4.7) suggest that at least some of the CH 4 and CO 2 in the fluids is basalt-derived. The range of δ 13 C values for the basalt-derived CO 2 is −6.8 to −9.7, calculated by assuming conservation of recharge ΣCO 2 during hydrothermal circulation. Apparent temperatures of equilibration between the CH 4 and the basalt-derived CO 2 range from 640°C to 750°C. Small amounts of ethane (C 2 H 6 /CH 4 ≅ 0.9 × 10 −3 −2.2 × 10 −3 ), propane, and butane detected in the samples may also have formed in the basalt. One sample of almost pure (95.5%) hydrothermal fluid contained a significant fraction, up to 63% and 74%, respectively, of the recharge Ar and N 2 . This suggests that the fluid has not undergone extensive vapor-liquid phase separation.

Journal of Geophysical Research Solid Earth↗
USGS2012

Effect of far-field slope on morphologic dating of scarplike landforms

The principal finding of this paper is that the far-field slope has a first-order effect on model age determinations of scarplike landforms in weakly consolidated terrains. Observationally, this can be demonstrated in two ways using the Lake Bonneville and Lahontan shoreline scarps as separate and combined data sets. Use of the reduced scarp slope, tan θ s - b (where θ s is the maximum scarp angle and b is the far-field or fan slope), instead of tan θ s alone as the measure of scarp slope measurably reduces separation between the two data sets induced by different average fan slopes for the two data sets and significantly reduces scatter in the slope-offset plot for both the separate and combined data sets. Theoretically, the argument can be put even more strongly, at least within the range of linear and nonlinear diffusion models that we consider here together with a mathematical transformation of the empirical approach of R. C. Bucknam and R. E. Anderson: When one correctly takes into account the far-field slope, one will basically get the same age determination no matter which of these models one uses; conversely, without accounting properly for the effect of far-field slope, one is virtually guaranteed to get an erroneous age determination, no matter which model is used.

Journal of Geophysical Research Solid Earth↗
USGS2012

Heat flow and thermotectonic problems of the central Ventura Basin, southern California

The Ventura Basin, southern California, is located near the Big Bend area of the San Andreas fault system, within the Transverse Ranges physiographic province. Continuous equilibrium temperature logs were measured in 12 idle oil wells located within the onshore Ventura Avenue, San Miguelito, Filmore, Oxnard, and West Montalvo fields to an average depth of about 3100 m (10,200 feet). Thermal conductivities were measured on all available samples. Heat flows were calculated with the aid of a thermostratigraphic scheme based on correlative gradient intervals and average thermal conductivity for the appropriate units. Negative curvature of the Ventura Avenue temperature profiles may be explained by an increase in thermal conductivity associated with tectonic compaction of the underlying Pliocene clastic sequence. Temperature profiles at Fillmore are enigmatic but suggest highly unusual geotectonic conditions. Basinwide, heat flow averages about 48 mW/m 2 , a value which is low relative to most of southern California. As heat flow does not vary systematically to the maximum measured depth of about 4 km, this anomaly is not easily explained in terms of hydrologic effects or recent uplift and erosion. However, a diminution of heat flow is an expectable consequence of the accumulation of cold sediments (up to 12 km) since Eocene time. If 70 mW/m 2 is accepted as the background heat flow, then the sedimentation effect is probably sufficient to explain the anomaly.

Journal of Geophysical Research Solid Earth↗
USGS2012

The timing of uplift, volcanism, and rifting peripheral to the Red Sea: A case for passive rifting?

Prior to the formation of the Red Sea the northeastern Afro/Arabian continent had low relief and was largely below sea level from the Late Cretaceous to the early Oligocene. The events leading to the formation of the Red Sea followed the sequence (1) alkaline volcanism and rifting beginning about 30–32 Ma affecting a narrow linear zone in the continent, (2) rotational block faulting and detachment faulting, well underway by 25 Ma, (3) gabbro and diorite magmatism, andesite to rhyolite volcanism, and fine-grained nonmarine sedimentation in the rift between 20 and 25 Ma, (4) fine-grained marine sedimentation in the rift as the early shelves started to subside in the middle Miocene, and (5) uplift of the adjacent continents (about 3 km) and subsidence of the shelves (about 4 km) between 13.8 and 5 Ma. The youth of the uplift is suggested by 44 fission track dates on apatites from rocks of the Proterozoic Arabian Shield that range in age from 13.8 to 568 Ma. The youngest of these ages, coupled with the present high relief along the Arabian escarpment and published heat flow measurements, indicate that 2.5–4 km uplift has occurred in the last 13.8 m.y. The sequence volcanism/rifting followed by uplift leads to our adoption of a passive mantle model for rift origin. Models that require uplift to create the rift are rejected, because of the late uplift. We advocate a model of lithospheric extension caused by two-dimensional plate stress over those requiring tractional drag at the base of the lithosphere caused by vigorous flow in the asthenosphere. It is acknowledged that traction models could explain the observed data, but they imply a rigid, static lithosphere and seem to require a link between the direction of flow in the asthenosphere and plate motions. Neither requirement is necessary in the extension model. The rift starts with mechanical extension in a narrow zone of lithosphere between 25–32 Ma in our model. The thinned lithosphere is replaced by upwelling asthenosphere and by rocks from the adjacent deep continental lithosphere which flow into the rift. Ductile flow of the deep continental lithosphere is accelerated by partial melting as rocks flow upward toward the rift axis. Once partially melted, rocks formerly part of the continental lithosphere join the upwelling asthenosphere, resulting in a rapid erosion of the lithospheric mantle beneath the continent near the rift edge. The resulting density decrease explains the uplift. We think that the Red Sea began as a consequence of changing plate geometries resulting from the collision of India and Eurasia. After the collision, the segment of the Owens fracture zone north of the Carlsberg Ridge became locked, forcing the northeast corner of Afro/Arabia to rotate with the Indian plate away from the rest of Africa.

Journal of Geophysical Research Solid Earth↗
USGS2012

Paleomagnetism of the Oligocene Kalamazoo Tuff: implications for middle Tertiary extension in east central Nevada

The Oligocene Kalamazoo Tuff (≃35 Ma) was sampled for paleomagnetic analysis across a 100-km-wide zone of highly extended crust in east central Nevada to estimate between-site vertical axis rotations and thus the relative importance of strike-slip faulting to the mechanism of extension. Subordinate sampling was also undertaken in a younger hornblende dacite intrusion (≃35 Ma) and the overlying tuff of North Creek (≃35 Ma). In general, ash flow tuffs cool and are magnetized within a short period of time relative to geomagnetic secular variation and their eutaxitic structures typically indicate the paleohorizontal. These attributes of ash flow tuffs, in addition to their generally widespread occurrence, make them excellent candidates for combined paleomagnetic and structural studies of regional deformation. However, in this study a number of problems associated with the paleomagnetism of the Kalamazoo Tuff are documented; they include topography-related variations of the eutaxitic structures, secular variation during slow cooling, postblocking rheomorphic flow, and local remagnetization of the tuff by younger igneous activity. The tilt-corrected data, with these sources of error reduced or eliminated, exhibit a 28° ± 12° clockwise rotation of the Schell Creek Range relative to the Kern Mountains region. This rotation implies differential extension accommodated by strike-slip faulting or N-S shortening. The paleomagnetic results also suggest that large changes in strike of layered units near faults with presumed strike-slip movement need not be the result of oroclinal bending, but could result from superimposed sets of orthogonal normal faults.

Journal of Geophysical Research Solid Earth↗
USGS2012

Tectonic history of the north portion of the San Andreas fault system, California, inferred from gravity and magnetic anomalies

Geologic and geophysical data for the San Andreas fault system north of San Francisco suggest that the eastern boundary of the Pacific plate migrated eastward from its presumed original position at the base of the continental slope to its present position along the San Andreas transform fault by means of a series of eastward jumps of the Mendocino triple junction. These eastward jumps total a distance of about 150 km since 29 Ma. Correlation of right-laterally displaced gravity and magnetic anomalies that now have components at San Francisco and on the shelf north of Point Arena indicates that the presently active strand of the San Andreas fault north of the San Francisco peninsula formed recently at about 5 Ma when the triple junction jumped eastward a minimum of 100 km to its present location at the north end of the San Andreas fault. Prior to 5 Ma the triple junction was located at the north end of a proposed northwesterly extension of the Pilarcitos fault. This jump took place at what is now about latitude 38°20′N on the North American plate and may have occurred during part of the time when the relative motion between the North American and Pacific plates rotated 20° clockwise, resulting in transpression along the earlier transcurrent San Andreas fault system. The proposed 150-km eastward movement of the triple junction explains the submarine topography near Cape Mendocino where the continental shelf south of the Mendocino fault extends about 130 km farther west than does the shelf directly north of the fault.

Journal of Geophysical Research Solid Earth↗
USGS2012

Morphology and growth history of Delgada Fan: Implications for the Neogene evolution of Point Arena Basin and the Mendocino Triple Junction

Long-range side scan (GLORIA) sonographs and seismic reflection data acquired during a survey of the western U.S. Exclusive Economic Zone in 1984, coupled with information from Deep Sea Drilling Project sites, provide new insights into the growth and evolution of the Delgada Fan. Construction of the fan commenced in the latest Miocene (∼6 Ma) following the filling of the Neogene Point Arena Basin. The fan presently covers more than 50×10 3 km 2 of the Pacific plate and contains approximately 15×10 3 km 3 of predominantly terrigenous detritus. The large size of the fan is incompatible with the small present-day supply of sediment to the canyon system. The GLORIA data show the Delgada Fan to be a hybrid-type fan, exhibiting characteristics of both elongate and radial fans. The morphology and volume of the fan, along with evidence for a decline in accumulation rates on the lower fan during the Quaternary period, suggest that the fan experienced an early growth phase (latest Miocene and Pliocene) characterized by relatively rapid progradation of elongate fan lobes followed by a period (Quaternary) of slower growth that has featured a shift of depocenters to sites closer to the canyons and a transition to distributary channels bordered by less prominent levees and overbank deposits. We examine the growth of Delgada Fan in relation to the Neogene evolution of the North American-Pacific plate boundary using a series of paleogeographic reconstructions based on recently published time displacement histories of the Mendocino triple junction (MTJ), the San Andreas fault (SAF), and the Pacific plate, upon which the fan rests. The time displacement curves for the SAF and the MTJ suggest that the MTJ and Mendocino Fracture Zone overtook and passed Point Arena Basin at about 10 Ma when the basin lay immediately southwest of the present San Francisco Bay area. We suggest that the MTJ joined the SAF at approximately that time and location, thus making the SAF the master fault in the transform system. This interpretation is compatible with evidence from seismic reflection profiles over the fan, which demonstrate that the fan and the canyon system and therefore Point Arena Basin have moved as a unit since the inception of fan growth (∼6–7 Ma). Point Arena Basin lay southwest of the San Francisco area at 10–12 Ma, and the passage of the MTJ caused the disruption of the forearc shelf and slope and the development of local uplifted and subsiding blocks. In particular, uplift of the “bay block” immediately east of the SAF may have provided the source area for the late Miocene sediments that filled Point Arena Basin and set the stage for the growth of Delgada Canyon and Fan system. The growth rate of the fan has decreased, and the style of deposition has changed as the system was tectonically transported to its present location adjacent to the small youthful drainages of the King Range.

Journal of Geophysical Research Solid Earth↗
USGS2012

Bedrock geology and tectonic evolution of the Wrangellia, Peninsular, and Chugach terranes along the Trans-Alaska Crustal Transect in the Chugach Mountains and southern Copper River Basin, Alaska

The Trans-Alaskan Crustal Transect in the southern Copper River Basin and Chugach Mountains traverses the margins of the Peninsular and Wrangellia terranes, and the adjacent accretionary oceanic units of the Chugach terrane to the south. The southern Wrangellia terrane margin consists of a polymetamorphosed magmatic arc complex at least in part of Pennsylvanian age (Strelna Metamorphics and metagranodiorite) and tonalitic metaplutonic rocks of the Late Jurassic Chitina magmatic arc. The southern Peninsular terrane margin is underlain by rocks of the Late Triassic (?) and Early Jurassic Talkeetna magmatic arc (Talkeetna Formation and Border Ranges ultra-mafic-mafic assemblage) on Permian or older basement rocks. The Peninsular and Wrangellia terranes are parts of a dominantly oceanic superterrane (composite Terrane II) that was amalgamated by Late Triassic time and was accreted to terranes of continental affinity north of the Denali fault system in the mid- to Late Cretaceous. The Chugach terrane in the transect area consists of three successively accreted units: (1) minor greenschist and intercalated blueschist, the schist of Liberty Creek, of unknown protolith age that was metamorphosed and probably accreted during the Early Jurassic, (2) the McHugh Complex (Late Triassic to mid-Cretaceous protolith age), a melange of mixed oceanic, volcaniclastic, and olistostromal rocks that is metamorphosed to prehnite-pumpellyite and lower greenschist facies that was accreted by middle Cretaceous time, and (3) the Upper Cretaceous Valdez Group, mainly magmatic arc-derived flysch and lesser oceanic volcanic rocks of greenschist facies that was accreted by early Paleocene time. A regional thermal event that culminated in early middle Eocene time (48–52 Ma) resulted in widespread greenschist facies metamorphism and plutonism.

Journal of Geophysical Research Solid Earth↗
USGS2012

Structural analysis of the southern Peninsular, southern Wrangellia, and northern Chugach terranes along the Trans-Alaska Crustal Transect, northern Chugach Mountains, Alaska

Structural and tectonic analysis of the southern Peninsular, southern Wrangellia, and northern Chugach terranes, along the Trans-Alaska Crustal Transect in the northern Chugach Mountains documents a long succession of Early Jurassic through Cenozoic deformational events. The deformational events are generally characterized by distinctive structural fabrics and metamorphisms. Most of the events are interpreted to be related to subduction-related accretion or terrane accretion along the Border Ranges fault system (BRFS) and companion faults, and the Contact fault system (CFS). Each period of subduction-related accretion consisted of underplating of the outboard unit beneath the adjacent inboard unit. The fabric associated with each subduction-related accretion consisted of folding, intense shearing, and local rolling of planar structures. Age and structural relationships suggest migration of the zone of subduction-related accretion from the BRFS to the north, through each accreting unit, to younger bounding thrust faults to the south. Other older and younger deformational events are also recognized and are interpreted to have formed before and after, respectively, accretions along the BRFS and CFS. The main younger deformational events are (1) early Tertiary north verging folding of portions of the northern Chugach and southern Wrangellia terranes and (2) broad folding and rotation of major and minor structures related to subduction-related accretion or terrane accretion during early and middle Tertiary oroclinal bending of Alaska.

Journal of Geophysical Research Solid Earth↗
USGS2012

Spatial patterns of aftershocks of shallow focus earthquakes in California and implications for deep focus earthquakes

Previous workers have pioneered statistical techniques to study the spatial distribution of aftershocks with respect to the focal mechanism of the main shock. Application of these techniques to deep focus earthquakes failed to show clustering of aftershocks near the nodal planes of the main shocks. To better understand the behavior of these statistics, this study applies them to the aftershocks of six large shallow focus earthquakes in California (August 6, 1979, Coyote Lake; May 2, 1983, Coalinga; April 24, 1984, Morgan Hill; August 4, 1985, Kettleman Hills; July 8, 1986, North Palm Springs; and October 1, 1987, Whittier Narrows). The large number of aftershocks accurately located by dense local networks allows us to treat these aftershock sequences individually instead of combining them, as was done for the deep earthquakes. The results for individual sequences show significant clustering about the closest nodal plane and the strike direction for five of the sequences and about the presumed fault plane for all six sequences. This implies that the previously developed method does work properly. Nonrandom behavior was also found about the slip directions, the P axis, the T axis, and the B axis, but this is probably caused by the lack of independence between these axes and the previously mentioned features of the focal mechanisms. Given that the method does work and that deep aftershocks were not shown to cluster about the main shock nodal planes, the shallow focus data were used to simulate the deep focus study. The goal is to determine if there are artificial factors that make clustering in the deep focus data unobservable. To more closely mimic the work on deep earthquakes, the largest aftershocks from each of the six sequences were combined and studied with respect to their respective main shock focal mechanisms. This reduced the significance of the clustering about the focal mechanism parameters, but not below 95% confidence. Gaussian noise was then added to the aftershock hypocenters in order to determine if the larger hypocentral and focal mechanism errors in the deep focus data could account for the previous negative result. The conclusion is that the following reasons are sufficient to explain the lack of clustering about the main shock nodal planes for the deep focus aftershocks: the need to combine aftershocks from several sequences, the size of the hypocentral location and focal mechanism errors, and the alignment of distant aftershocks with the Wadati-Benioff zone.

Journal of Geophysical Research Solid Earth↗
USGS2012

State of stress and modern deformation of the northern Basin and Range Province

Constraints on the current stress regime of the actively extending northern Basin and Range province are provided by deformation data (focal mechanisms and fault slip studies), hydraulic fracturing in situ stress measurements, borehole elongation (“breakouts”) analyses, and alignment of young volcanic vents. The integrated data indicate significant variations both in principal stress orientations and magnitudes. An approximately E-W least principal stress direction appears to characterize both the eastern and western margins of the Basin and Range province, whereas in the active interior parts of the province extension occurs in response to a least principal stress oriented NW to N60°W. The contrast in stress orientations between the province boundaries and in the interior suggests that along the margins the least principal stress direction may be locally controlled by the generally northerly trending profound lithospheric discontinuities associated with these margins. Active deformation along the southeastern and western province margins is characterized by a combination of strike-slip and normal faulting. Focal mechanisms along northeastern province margin (Wasatch front) and in central Nevada indicate a combination of normal and oblique-normal faulting. Temporal, regional, and depth-dependent variations in the relative magnitudes of the vertical and maximum horizontal stresses can explain much of the observed variations in deformation styles. However, some depth variation in faulting style inferred from focal mechanisms may be apparent and simply a function of the attitude of fault planes being reactivated. Evidence for significant temporal variation (or multiple cycles of variation) in relative stress magnitude comes from the Sierran front-Basin and Range boundary region where recent earthquakes are predominantly strike slip, whereas the profound relative vertical relief across the Sierra frontal fault zone in the last 9–10 m.y. implies a normal faulting stress regime. Using the best data on stress orientation, relative stress magnitudes are constrained from slip vectors of major earthquakes and young fault displacements. Analysis of well-constrained slip vectors in the Owens Valley, California, area indicate that large temporal variations in the magnitude of the approximately N-S oriented maximum horizontal stress are required to explain dominantly dip-slip and strike-slip offsets on subparallel faults. Similar faulting relations are observed throughout much of the boundary zone between the Basin and Range-Sierra Nevada (including the Walker Lane belt). Along the eastern province margin in the Wasatch front area in Utah, available data suggest that the maximum and minimum horizontal stresses may be approximately equal at depths of <4–5 km. Earthquake focal mechanisms in this area suggest more variability in relative magnitude of the two horizontal stresses with depth. Furthermore, superimposed sets of young fault striae along a segment of the Wasatch fault also indicate temporal variations of relative stress magnitudes. Sources of regional and temporal variations in the stress field may be linked to variable shear tractions applied to the base of the brittle crust related to intrusion, thermally induced flow, and the influence of the San Andreas plate boundary. Although difficult to date accurately, the fault slip data suggest that the temporal variations in relative magnitudes stress may occur on the time scale of both a single major earthquake cycle (1000–5000 years) and multiple earthquake cycles (10,000+ years).

Journal of Geophysical Research Solid Earth↗