Search USGS⌕ Search

SEARCH · Search USGS

Results for “Alaska Reflections”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11Linked to original sources
USGS2016

A possible transoceanic tsunami directed toward the U.S. west coast from the Semidi segment, Alaska convergent margin

The Semidi segment of the Alaska convergent margin appears capable of generating a giant tsunami like the one produced along the nearby Unimak segment in 1946. Reprocessed legacy seismic reflection data and a compilation of multibeam bathymetric surveys reveal structures that could generate such a tsunami. A 200 km long ridge or escarpment with crests >1 km high is the surface expression of an active out-of-sequence fault zone, recently referred to as a splay fault. Such faults are potentially tsunamigenic. This type of fault zone separates the relatively rigid rock of the margin framework from the anelastic accreted sediment prism. Seafloor relief of the ridge exceeds that of similar age accretionary prism ridges indicating preferential slip along the splay fault zone. The greater slip may derive from Quaternary subduction of the Patton Murray hot spot ridge that extends 200 km toward the east across the north Pacific. Estimates of tsunami repeat times from paleotsunami studies indicate that the Semidi segment could be near the end of its current inter-seismic cycle. GPS records from Chirikof Island at the shelf edge indicate 90% locking of plate interface faults. An earthquake in the shallow Semidi subduction zone could generate a tsunami that will inundate the US west coast more than the 1946 and 1964 earthquakes because the Semidi continental slope azimuth directs a tsunami southeastward.

Geochemistry, Geophysics, Geosystems↗
USGS2012

Polar and brown bear genomes reveal ancient admixture and demographic footprints of past climate change

Polar bears (PBs) are superbly adapted to the extreme Arctic environment and have become emblematic of the threat to biodiversity from global climate change. Their divergence from the lower-latitude brown bear provides a textbook example of rapid evolution of distinct phenotypes. However, limited mitochondrial and nuclear DNA evidence conflicts in the timing of PB origin as well as placement of the species within versus sister to the brown bear lineage. We gathered extensive genomic sequence data from contemporary polar, brown, and American black bear samples, in addition to a 130,000- to 110,000-y old PB, to examine this problem from a genome-wide perspective. Nuclear DNA markers reflect a species tree consistent with expectation, showing polar and brown bears to be sister species. However, for the enigmatic brown bears native to Alaska's Alexander Archipelago, we estimate that not only their mitochondrial genome, but also 5–10% of their nuclear genome, is most closely related to PBs, indicating ancient admixture between the two species. Explicit admixture analyses are consistent with ancient splits among PBs, brown bears and black bears that were later followed by occasional admixture. We also provide paleodemographic estimates that suggest bear evolution has tracked key climate events, and that PB in particular experienced a prolonged and dramatic decline in its effective population size during the last ca. 500,000 years. We demonstrate that brown bears and PBs have had sufficiently independent evolutionary histories over the last 4–5 million years to leave imprints in the PB nuclear genome that likely are associated with ecological adaptation to the Arctic environment.

Proceedings of the National Academy of Sciences↗
USGS2015

Spatially explicit estimation of aboveground boreal forest biomass in the Yukon River Basin, Alaska

Quantification of aboveground biomass (AGB) in Alaska’s boreal forest is essential to the accurate evaluation of terrestrial carbon stocks and dynamics in northern high-latitude ecosystems. Our goal was to map AGB at 30 m resolution for the boreal forest in the Yukon River Basin of Alaska using Landsat data and ground measurements. We acquired Landsat images to generate a 3-year (2008–2010) composite of top-of-atmosphere reflectance for six bands as well as the brightness temperature (BT). We constructed a multiple regression model using field-observed AGB and Landsat-derived reflectance, BT, and vegetation indices. A basin-wide boreal forest AGB map at 30 m resolution was generated by applying the regression model to the Landsat composite. The fivefold cross-validation with field measurements had a mean absolute error (MAE) of 25.7 Mg ha −1 (relative MAE 47.5%) and a mean bias error (MBE) of 4.3 Mg ha −1 (relative MBE 7.9%). The boreal forest AGB product was compared with lidar-based vegetation height data; the comparison indicated that there was a significant correlation between the two data sets.

Alaska↗
USGS2012

High shrew diversity on Alaska's Seward Peninsula: Community assembly and environmental change

In September 2010, 6 species of shrews (genus: Sorex ) were collected at a single locality on the Seward Peninsula of Alaska. Such high sympatric diversity within a single mammalian genus is seldom realized. This phenomenon at high latitudes highlights complex Arctic community dynamics that reflect significant turnover through time as a consequence of environmental change. Each of these shrew species occupies a broad geographic distribution collectively spanning the entire Holarctic, although the study site lies within Eastern Beringia, near the periphery of all individual ranges. A review of published genetic evidence reflects a depauperate shrew community within ice-free Beringia through the last glaciation, and recent assembly of current diversity during the Holocene.

Alaska↗
USGS1999

Juvenile Marbled Murrelet nurseries and the productivity index

Late summer counts of juveniles at sea are used as an index of Marbled Murrelet ( Brachyramphus marmoratus ) reproductive success, but little is known about juvenile dispersal or habitat use. Further, it is not known whether these counts accurately reflect absolute breeding success. To address these questions we conducted five boat surveys for Marbled Murrelets and Pigeon Guillemots ( Cepphus columba ) in Kachemak Bay, Alaska between 7-24 August 1996. Juvenile murrelet distribution in the bay was patchy, and we identified a juvenile Marbled Murrelet 'nursery' area in the outer bay. Fifty-three of 61 juvenile murrelets were in this area, whereas after-hatch-year (AHY) murrelets were dispersed throughout the bay, as were juvenile and AHY Pigeon Guillemots. The murrelet nursery was characterized by water inside of or at the edge of a 20 m deep contour, semi-protected seas, productive waters, and a large bed of Nereocystis kelp. Juveniles comprised 16.1% of all murrelets and 24.8% of all guillemots observed at sea. These data suggest a maximum reproductive success of 0.32 chicks/pair if all AHY murrelets were breeding and 0.46 chicks/pair if only 70% of AHY murrelets were breeding. For guillemots, maximum productivity estimated from at-sea counts was 0.50 chicks/pair if all AHY were breeding and 0.71 chicks/pair if only 70% were breeding. The guillemot estimate was similar to that obtained by concurrent studies at nine guillemot colonies in the bay (0.56 chicks/pair). These results suggest that at sea surveys in late summer provide a reasonable index of local productivity for nearshore alcids. Further, if murrelet nursery areas can be found, at sea counts may provide a valid measure of absolute productivity.

Alaska↗
USGS1960

The physiographic provinces of Alaska

The wealth of recently accumulated geographic information on Alaska has made desirable a new classification of the state into physiographic divisions. Most of Alaska is now covered by topographic maps of high quality at scales of 1:63,360 and 1:250,000, prepared by multiplex methods from aerial photography. A classification made now is not likely to err through lack of knowledge of the geography and topography of the state; any changes it requires will reflect matters of judgment and taste, rather than ignorance. The accompanying classification was prepared intermittently between 1949 and 1959; most of the work was done between 1956 and 1959. It is hoped that it will bring about a clearer understanding of the geography of Alaska and will stimulate research into the history of development of Alaskan landforms.

Alaska↗
USGS2021

GIS-based identification of areas that have resource potential for lode gold in Alaska

Several comprehensive, data-driven geographic information system (GIS) analyses were conducted to assess prospectivity for lode gold in Alaska. These analyses use available geospatial datasets of lithologic, geochemical, mineral occurrence, and geophysical data to build models for recognizing different types of gold deposits within physiographic units defined by stream drainage basins that are approximately 100 square kilometers in area. The analytical methods successfully delineated areas in the State that contain known lode gold deposits and occurrences, providing some measure of confidence in their ability to predict gold prospectivity in areas of unknown lode gold potential. The results of our analyses indicate high prospectivity in a few areas scattered around the State that are not known to contain lode gold deposits. In addition to assessing the potential for lode gold deposits in Alaska, we designed analyses to distinguish different lode gold deposit types, including orogenic, reduced-intrusion-related, epithermal, and gold-bearing porphyry. These can primarily be differentiated using their unique trace element geochemical fingerprints and elemental enrichments, which reflect the characteristics of the geologic environment and chemistry of the ore-forming fluids. We identified multiple parameters that would discriminate the different types of gold deposits, but owing to the limits of available data, the compositional similarity of ore-forming fluids among some types of lode gold deposits, and overlapping geologic environments, distinguishing deposit types at the state scale in Alaska remains problematic. These limitations resulted in overlapping areas of prospectivity for different deposit types, highlighting the challenges for targeted gold exploration in Alaska. Adjustment of some scoring parameters and recharacterization at smaller scales to highlight individual mineral systems for application of prospectivity analyses may be helpful at a district scale. At a regional scale, the aerial overlap of individual deposit type analyses reinforces confidence in prospectivity for a lode gold resource in a drainage basin. Our analysis for undivided lode gold deposits will be the most practical analysis for landuse decisions in which delineation of areas that have confident potential for gold deposits in general is the primary goal. Data-driven GIS analysis for lode gold potential in Alaska, although limited by the size and uneven coverage of available datasets, objectively indicates prospectivity in areas where exposure is good as well as in areas under cover. The results of our analyses show medium to high prospectivity in areas that surround known deposits, indicating an overall expansion of areas that have the potential to contain gold deposits. Exploration in these areas may help improve the balance between the volume of gold produced in placer districts statewide and the relatively low volume of identified lode resources that contribute to these placer deposits. The results of our analyses can help focus future investigations in areas that show prospectivity but are not known to contain gold deposits, as well as in areas where data are lacking and the geology is poorly understood, and acquisition of additional data may help better define and constrain gold prospectivity.

Alaska↗
USGS2013

Does a boundary of the Wrangell Block extend through southern Cook Inlet and Shelikof Strait, Alaska?

In southcentral Alaska, the boundaries of two different tectonic blocks extend southwestward from the Denali Fault toward Cook Inlet and Shelikof Strait. We use offshore multichannel seismic reflection data and oil-well stratigraphy to evaluate whether local geologic structures are compatible with boundaries of either tectonic block and with the relative motion expected across the block boundaries. Our main conclusion is that a block boundary does not extend southwestward the entire length of Shelikof Strait, as was proposed for one of the blocks. Furthermore, below southern Cook Inlet, no high-strain extensional structures that might be related to either proposed boundary are evident. Small normal faults below southern Cook Inlet could have been caused by block rotation, but they represent only minor strain. One way to explain the lack of larger structures is that the rotation began recently so that indicative boundary structures have not yet formed. Alternatively, deformation associated with the block boundaries could be distributed through onshore areas.

Alaska↗
USGS2007

Mapping known and potential mineral occurrences and host rocks in the Bonnifield Mining District using minimal cloud- and snow-cover ASTER data

On July 8, 2003, the Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER) sensor acquired satellite imagery of a 60-kilometer-wide swath covering a portion of the Bonnifield mining district within the southernmost part of the Tintina Gold Province, Alaska, under unusually favorable conditions of minimal cloud and snow cover. Although rocks from more than eight different lithotectonic terranes are exposed within the extended swath of data, we focus on volcanogenic massive sulfides (VMS) and porphyry deposits within the Yukon-Tanana terrane (YTT), the largest Mesozoic accretionary terrane exposed between the Denali fault system to the south of Fairbanks and the Tintina fault system to the north of Fairbanks. Comparison of thermal-infrared region (TIR) decorrelation stretch data to available geologic maps indicates that rocks from the YTT contain a wide range of rock types ranging in composition from mafic metavolcanic rocks to felsic rock types such as metarhyolites, pelitic schists, and quartzites. The nine-band ASTER visible-near-infrared region--short-wave infrared region (VNIR-SWIR) reflectance data and spectral matched-filter processing were used to map hydrothermal alteration patterns associated with VMS and porphyry deposit types. In particular, smectite, kaolinite, opaline silica, jarosite and (or) other ferric iron minerals defined narrow (less than 250-meter diameter) zonal patterns around Red Mountain and other potential VMS targets. Using ASTER we identified some of the known mineral deposits in the region, as well as mineralogically similar targets that may represent potential undiscovered deposits. Some known deposits were not identified and may have been obscured by vegetation or snow cover or were too small to be resolved.

Alaska, Yukon↗
USGS2006

Geologic characteristics of benthic habitats in Glacier Bay, southeast Alaska

In April 2004, more than 40 hours of georeferenced submarine digital video was collected in water depths of 15-370 m in Glacier Bay to (1) ground-truth existing geophysical data (bathymetry and acoustic reflectance), (2) examine and record geologic characteristics of the sea floor, and (3) investigate the relation between substrate types and benthic communities, and (4) construct predictive maps of seafloor geomorphology and habitat distribution. Common substrates observed include rock, boulders, cobbles, rippled sand, bioturbated mud, and extensive beds of living horse mussels and scallops. Four principal sea-floor geomorphic types are distinguished by using video observations. Their distribution in lower and central Glacier Bay is predicted using a supervised, hierarchical decision-tree statistical classification of geophysical data.

Open-File Report↗
USGS2010

Magma flux at Okmok Volcano, Alaska, from a joint inversion of continuous GPS, campaign GPS, and interferometric synthetic aperture radar

Volcano deformation is usually measured using satellite geodetic techniques including interferometric synthetic aperture radar (InSAR), campaign GPS, and continuous GPS. Differences in the spatial and temporal sampling of each system mean that most appropriate inversion scheme to determine the source parameters from each data set is different. Most studies either compare results from independent inversions or subsample the data sets to the lowest common factor. It is unclear whether differences in the solution reflect differences in source behavior, differences in measurement bias, or differences in inversion technique. Here we develop a single inversion procedure that captures the benefits of each system, especially the daily sampling of continuous GPS and the high spatial resolution of InSAR. Okmok Volcano, Alaska, is an ideal target for such a test because a long series (<15 years) of InSAR and continuous GPS measurement exists and the source is almost continuously active and in a stable location.

Alaska↗
USGS2015

Sensitivity of airborne geophysical data to sublacustrine and near-surface permafrost thaw

A coupled hydrogeophysical forward and inverse modeling approach is developed to illustrate the ability of frequency-domain airborne electromagnetic (AEM) data to characterize subsurface physical properties associated with sublacustrine permafrost thaw during lake-talik formation. Numerical modeling scenarios are evaluated that consider non-isothermal hydrologic responses to variable forcing from different lake depths and for different hydrologic gradients. A novel physical property relationship connects the dynamic distribution of electrical resistivity to ice saturation and temperature outputs from the SUTRA groundwater simulator with freeze–thaw physics. The influence of lithology on electrical resistivity is controlled by a surface conduction term in the physical property relationship. Resistivity models, which reflect changes in subsurface conditions, are used as inputs to simulate AEM data in order to explore the sensitivity of geophysical observations to permafrost thaw. Simulations of sublacustrine talik formation over a 1000-year period are modeled after conditions found in the Yukon Flats, Alaska. Synthetic AEM data are analyzed with a Bayesian Markov chain Monte Carlo algorithm that quantifies geophysical parameter uncertainty and resolution. Major lithological and permafrost features are well resolved by AEM data in the examples considered. The subtle geometry of partial ice saturation beneath lakes during talik formation cannot be resolved using AEM data, but the gross characteristics of sub-lake resistivity models reflect bulk changes in ice content and can identify the presence of a talik. A final synthetic example compares AEM and ground-based electromagnetic responses for their ability to resolve shallow permafrost and thaw features in the upper 1–2 m below ground outside the lake margin.

The Cryosphere↗
USGS1984

Paleogene geology and chronology of southwestern Umnak Island, Aleutian Islands, Alaska

The rocks of southwestern Umnak Island (Nikolski area) consist mainly of a slightly deformed marine sedimentary sequence intruded by hypabyssal quartz diorite sills and small plutons. Laminated and thin-bedded argillaceous and tuffaceous mudstone and siltstone reflect volcanic arc sedimentation from late Eocene to early Oligocene time. Zeolite facies minerals formed during diagenesis include heulandite, analcime, quartz, chlorite, and smectite. Radiometric dates from sill rock and plutons yield apparent ages of about 30 Ma, i.e, middle Oligocene. Chemical data from igneous rocks exhibit calc-alkaline and tholeiitic volcanic arc differentiation trends. Dikes of pyroxene basalt yield K/Ar apparent ages as old at 17 Ma, and a columnar-jointed plug of pyroxene basalt is as young as 1 Ma. The fossil ages and radiometric dates from southwestern Umnak Island are similar to those reported from other central and eastern Aleutian islands, and indicate uniformity in the chronology and tectonic development of the archipelago during the Paleogene. Paleomagnetic data suggest possible northward movement but remain equivocal and more work is indicated.

Alaska↗
USGS1982

Digital data base application to porphyry copper mineralization in Alaska; case study summary

The purpose of this report is to summarize the progress in use of digital image analysis techniques in developing a conceptual model for assessing porphyry copper mineral potential. The study area consists of approximately the southern one-half of the 1? by 3? Nabesna quadrangle in east-central Alaska. The digital geologic data base consists of data compiled under the Alaskan Mineral Resource Assessment Program (AMRAP) as well as digital elevation data and Landsat spectral reflectance data from the Multispectral Scanner System. The digital data base used to develop and implement a conceptual model for porphyry-type copper mineralization consisted of 16 original data types and 18 derived data sets formatted in a grid-cell (raster) structure and registered to a map base in the Universal Transverse Mercator (UTM) projection. Minimum curvature and inverse distance squared interpolation techniques were used to generate continuous surfaces from sets of irregularly spaced data points. Processing requirements included: (1) merging or overlaying of data sets, (2) display and color coding of maps and images, (3) univariate and multivariate statistical analyses, and (4) compound overlaying operations. Data sets were merged and processed to create stereoscopic displays of continuous surfaces. The ratio of several data sets were calculated to evaluate relative variations and to enhance the display of surface alteration (gossans). Factor analysis and principal components analysis techniques were used to determine complex relationships and correlations between data sets. The resultant model consists of 10 parameters that identify three areas most likely to contain porphyry copper mineralization; two of these areas are known occurrences of mineralization and the third is not well known. Field studies confirmed that the three areas identified by the model have significant copper potential.

Open-File Report↗
USGS2021

The Alaska convergent margin backstop splay fault zone, a potential large tsunami generator between the frontal prism and continental framework

The giant tsunami that swept the Pacific from Alaska to Antarctica in 1946 was generated along one of three Alaska Trench instrumentally recorded aftershock areas following great and giant earthquakes. Aftershock areas were investigated during the past decade with multibeam bathymetry, ocean bottom seismograph wide‐angle seismic, reprocessed legacy, and new seismic reflection images. Summarized and updated here are previous papers and additional data. Tectonic structures collocated with aftershock area boundaries indicate possible lengths of rupture in future great earthquakes. NE aftershock area boundaries relate to subducted lower plate structures whereas the SW zone upper plate retains Beringian structural relicts. The lower to middle slope transition separating a stronger continental framework rock from a weaker accreted prism occurs along splay fault zones previously interpreted as backstops in seismic images. Damage zones along splay faults are generally 1‐km‐wide dipping typically 21°. Splays form slip paths from the plate interface to the seafloor much shorter than the 3–4° dipping plate interface beneath the frontal prism. Associated seafloor vent structures indicate overpressured fluids at depth. Splay fault dip and its rigid hanging wall impart greater seafloor uplift than the accreted prism per unit of slip making them effective tsunami generators. Backstop splay fault zones (BSFZs) run along the entire Alaska Trench. Beneath the frontal prism, active bend faults add rugosity to the plate interface and km high relief is commonly imaged in reprocessed legacy and new seismic data. The 1946 Unimak great (M8.6) earthquake epicenter is located near the BSFZ.

Alaska↗
USGS1981

Geology and geochemistry of gas-charged sediment on Kodiak Shelf, Alaska

Methane concentrations in some sediment cores from the Kodiak Shelf and adjacent continental slope increase with depth by three or four orders of magnitude and exceed the solubility in water at ambient conditions. Acoustic anomalies in seismic-reflection records imply that methane-rich sediment is widespread. Molecular composition of hydrocarbon gases and isotopic composition of methane indicate gas formation by shallow biogenic processes. Stratigraphic positions of acoustic anomalies in Quaternary glacial and posttransgressive sediments suggest that these units are likely sources of gas. A seep along the extension of a fault may be gas venting from a deeper thermogenic source.

Alaska↗
USGS2016

Upper Cretaceous and Lower Jurassic strata in shallow cores on the Chukchi Shelf, Arctic Alaska

Shallow cores collected in the 1980s on the Chukchi Shelf of western Arctic Alaska sampled pre-Cenozoic strata whose presence, age, and character are poorly known across the region. Five cores from the Herald Arch foreland contain Cenomanian to Coniacian strata, as documented by biostratigraphy, geochronology, and thermochronology. Shallow seismic reflection data collected during the 1970s and 1980s show that these Upper Cretaceous strata are truncated near the seafloor by subtle angular unconformities, including the Paleogene mid-Brookian unconformity in one core and the Pliocene-Pleistocene unconformity in four cores. Sedimentary structures and lithofacies suggest that Upper Cretaceous strata were deposited in a low accommodation setting that ranged from low-lying coastal plain (nonmarine) to muddy, shallow-marine environments near shore. These observations, together with sparse evidence from the adjacent western North Slope, suggest that Upper Cretaceous strata likely were deposited across all of Arctic Alaska. A sixth core from the Herald Arch contains lower Toarcian marine strata, indicated by biostratigraphy, truncated by a Neogene or younger unconformity. These Lower Jurassic strata evidently were deposited south of the arch, buried structurally to high levels of thermal maturity during the Early Cretaceous, and uplifted on the Herald thrust-fault system during the mid to Late Cretaceous. These interpretations are based on regional stratigraphy and apatite fission-track data reported in a complementary report and are corroborated by the presence of recycled palynomorphs of Early Jurassic age and high thermal maturity found in Upper Cretaceous strata in two of the foreland cores. This dataset provides evidence that uplift and exhumation of the Herald thrust belt provided sediment to the foreland during the Late Cretaceous.

Professional Paper↗
USGS2020

Mitochondrial genome diversity and population mitogenomics of Polar cod (Boreogadus saida) and Arctic dwelling gadoids

High-latitude fish typically exhibit a narrow thermal tolerance window, which may pose challenges when coping with temperatures that shift outside of a species’ range of tolerance. Due to its role in aerobic metabolism and energy balance, the mitochondrial genome is likely critical for the acclimation and adaptation to differing temperature regimes in marine ectotherms. As oceans continue to warm, there is growing need to understand the ability of organisms to respond to changing environmental conditions given evidence that some species, in particular cold-water species, may already be experiencing difficulties. To assess how Arctic gadids in Alaska have responded to differential thermal preferences in the past and how regions are interconnected, we sequenced complete mitochondrial genomes for four Arctic gadids to determine the distribution of mitochondrial diversity and population-level structure as well as to detect signatures of selection acting on the mitochondrial genome. We found little population-level structure within all four species with the clear exception of Gulf of Alaska saffron cod ( Eleginus gracilis ). Northern localities exhibited higher levels of genetic diversity and primarily northern lineages were observed within polar cod ( Boreogadus saida ) and saffron cod, likely reflecting asymmetrical dispersal and potentially admixture of distinct lineages via ocean currents. The main evolutionary force shaping the evolution of the mitogenome appears to be purifying selection, but we also identified potential positive selection of candidate amino acid replacements primarily in complex I (ND genes) in polar cod. The high levels of mitochondrial diversity observed in our study and large population size may provide this species with the ability to respond evolutionarily (i.e. long-term) to a changing environment.

Alaska↗