Search USGS⌕ Search

SEARCH · Search USGS

Results for “One Earth”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10Linked to original sources
USGS2012

Characterizing the proposed geologic repository for high-level radioactive waste at Yucca Mountain, Nevada: hydrology and geochemistry

This hydrology and geochemistry volume is a companion volume to the 2007 Geological Society of America Memoir 199, The Geology and Climatology of Yucca Mountain and Vicinity, Southern Nevada and California , edited by Stuckless and Levich. The work in both volumes was originally reported in the U.S. Department of Energy regulatory document Yucca Mountain Site Description , for the site characterization study of Yucca Mountain, Nevada, as the proposed U.S. geologic repository for high-level radioactive waste. The selection of Yucca Mountain resulted from a nationwide search and numerous committee studies during a period of more than 40 yr. The waste, largely from commercial nuclear power reactors and the government's nuclear weapons programs, is characterized by intense penetrating radiation and high heat production, and, therefore, it must be isolated from the biosphere for tens of thousands of years. The extensive, unique, and often innovative geoscience investigations conducted at Yucca Mountain for more than 20 yr make it one of the most thoroughly studied geologic features on Earth. The results of these investigations contribute extensive knowledge to the hydrologic and geochemical aspects of radioactive waste disposal in the unsaturated zone. The science, analyses, and interpretations are important not only to Yucca Mountain, but also to the assessment of other sites or alternative processes that may be considered for waste disposal in the future. Groundwater conditions, processes, and geochemistry, especially in combination with the heat from radionuclide decay, are integral to the ability of a repository to isolate waste. Hydrology and geochemistry are discussed here in chapters on unsaturated zone hydrology, saturated zone hydrology, paleohydrology, hydrochemistry, radionuclide transport, and thermally driven coupled processes affecting long-term waste isolation. This introductory chapter reviews some of the reasons for choosing to study Yucca Mountain as a repository site.

Nevada↗
USGS2023

Canada Basin tectono-sedimentary element, Arctic Ocean

The Canada Basin (CB) formed during a short period of seafloor spreading inferred to be Early Cretaceous in age. Brookian strata of inferred Early Cretaceous–Holocene age comprise the sedimentary fill of the Canada Basin Tectono-Sedimentary Element (CB TSE). Although the CB has remained tectonically quiet since seafloor spreading ceased, both proximal and distal tectonism (Alpha Ridge magmatism, and the Cordilleran, Brooks Range and Eurekan orogenies) have influenced sediment source areas, dispersal paths and thicknesses in the basin. In the Neogene, the dominant source of sediments was the Mackenzie River, which drains northern portions of the Cordilleran orogen. The CB TSE is one of the most remote and challenging places on Earth to explore. Although regional seismic reflection and refraction data exist, there are no boreholes to constrain interpretations. Existing published estimates of hydrocarbon potential range from limited to moderate to significant.

Geological Society of London Monograph, Arctic Sed↗
USGS2013

Land-use change, economics, and rural well-being in the Prairie Pothole Region of the United States

This fact sheet highlights findings included in a comprehensive new report (see USGS Professional Paper 1800) which investigated land-use change, economic characteristics, and rural community well-being in the Prairie Pothole Region of the United States. Once one of the largest grassland-wetlands ecosystems on earth, the North American prairie has experienced extensive conversion to cultivated agriculture, with farming becoming the dominant land use in the region over the last century. Both perennial habitat lands and agricultural croplands retain importance economically, socially, and culturally. Greatly increased oil and gas development in recent years brought rises in employment and income but also stressed infrastructure, cost of living, and crime rates. Research described in these reports focuses on land-use dynamics and illuminates how economic variables and rural development in the Prairie Pothole Region might be influenced as land uses change.

Iowa, Minnesota, Montana, Nebraska, North Dakota, ↗
USGS2006

Studies by the U.S. Geological Survey in Alaska, 2005

Summary The collection of papers that follows continues the series of U.S. Geological Survey (USGS) investigative reports in Alaska under the broad umbrella of the geologic sciences. This series represents new and sometimes-preliminary findings that are of interest to Earth scientists in academia, government, and industry; to land and resource managers; and to the general public. The reports presented in Studies by the U.S. Geological Survey in Alaska cover a broad spectrum of topics from various parts of the State, serving to emphasize the diversity of USGS efforts to meet the Nation’s needs for Earth-science information in Alaska. This professional paper is one of a series of “online only” versions of Studies by the U.S. Geological Survey in Alaska , reflecting the current trend toward disseminating research results on the World Wide Web with rapid posting of completed reports.

Alaska↗
USGS2009

Studies by the U.S. Geological Survey in Alaska, 2007

The collection of papers that follow continues the series of U.S. Geological Survey (USGS) investigative reports in Alaska under the broad umbrella of the geologic sciences. This series represents new and sometimes-preliminary findings that are of interest to Earth scientists in academia, government, and industry; to land and resource managers; and to the general public. The reports presented in Studies by the U.S. Geological Survey in Alaska cover a broad spectrum of topics from various parts of the State, serving to emphasize the diversity of USGS efforts to meet the Nation's needs for Earth-science information in Alaska. This professional paper is one of a series of 'online only' versions of Studies by the U.S. Geological Survey in Alaska, reflecting the current trend toward disseminating research results on the World Wide Web with rapid posting of completed reports.

Professional Paper↗
USGS2010

Studies by the U.S. Geological Survey in Alaska, 2008-2009

The collection of papers that follow continues the series of U.S. Geological Survey (USGS) investigative reports in Alaska under the broad umbrella of the geologic sciences. This series represents new and sometimes-preliminary findings that are of interest to Earth scientists in academia, government, and industry; to land and resource managers; and to the general public. The reports presented in Studies by the U.S. Geological Survey in Alaska cover a broad spectrum of topics from various parts of the State, serving to emphasize the diversity of USGS efforts to meet the Nation's needs for Earth-science information in Alaska. This professional paper is one of a series of 'online only' versions of Studies by the U.S. Geological Survey in Alaska, reflecting the current trend toward disseminating research results on the World Wide Web with rapid posting of completed reports.

Professional Paper↗
USGS2011

Studies by the U.S. Geological Survey in Alaska, 2010

The collection of papers that follows continues the series of U.S. Geological Survey (USGS) investigative reports in Alaska under the broad umbrella of the geologic sciences. This series represents new and sometimes-preliminary findings that are of interest to Earth scientists in academia, government, and industry; to land and resource managers; and to the general public. The reports presented in Studies by the U.S. Geological Survey in Alaska cover a broad spectrum of topics from various parts of the State, serving to emphasize the diversity of USGS efforts to meet the Nation’s needs for Earth-science information in Alaska. This professional paper is one of a series of “online only” versions of Studies by the U.S. Geological Survey in Alaska , reflecting the current trend toward disseminating research results on the World Wide Web with rapid posting of completed reports.

Alaska↗
USGS2012

Studies by the U.S. Geological Survey in Alaska, 2011

The collection of papers that follow continues the series of U.S. Geological Survey (USGS) investigative reports in Alaska under the broad umbrella of the geologic sciences. This series represents new and sometimes-preliminary findings that are of interest to Earth scientists in academia, government, and industry; to land and resource managers; and to the general public. The reports presented in Studies by the U.S. Geological Survey in Alaska cover a broad spectrum of topics from various parts of the State, serving to emphasize the diversity of USGS efforts to meet the Nation's needs for Earth-science information in Alaska. This professional paper is one of a series of "online only" versions of Studies by the U.S. Geological Survey in Alaska , reflecting the current trend toward disseminating research results on the World Wide Web with rapid posting of completed reports.

Alaska↗
USGS2017

A field trip guide to the petrology of Quaternary volcanism on the Yellowstone Plateau

The Yellowstone Plateau is one of the largest manifestations of silicic volcanism on Earth, and marks the youngest focus of magmatism associated with the Yellowstone Hot Spot. The earliest products of Yellowstone Hot Spot volcanism are from ~17 million years ago, but may be as old as ~32 Ma, and include contemporaneous eruption of voluminous mafic and silicic magmas, which are mostly located in the region of northwestern Nevada and southeastern Oregon. Since 17 Ma, the main locus of Yellowstone Hot Spot volcanism has migrated northeastward producing numerous silicic caldera complexes that generally remain active for ~2–4 million years, with the present-day focus being the Yellowstone Plateau. Northeastward migration of volcanism associated with the Yellowstone Hot Spot resulted in the formation of the Snake River Plain, a low relief physiographic feature extending ~750 kilometers from northern Nevada to eastern Idaho. Most of the silicic volcanic centers along the Snake River Plain have been inundated by younger basalt volcanism, but many of their ignimbrites and lava flows are exposed in the extended regions at the margins of the Snake River Plain .

Wyoming↗
USGS2023

Using Global Fiducials Library high-resolution imagery, commercial satellite imagery, Landsat and Sentinel satellite imagery, and aerial photography to monitor change at East Timbalier Island, Louisiana, 1953–2021

This report documents morphological changes between 1953 and 2021 at East Timbalier Island, Louisiana, a Gulf of Mexico barrier island. East Timbalier Island, which was located west of the Mississippi River Delta at the front of Timbalier Bay, was one of the most rapidly changing barrier islands on Earth. Since aerial photographs were initially taken in 1953, the Island steadily lost length and area, finally eroding away by early summer 2021. After major storm events, sediment eroded from the Island and migrated hundreds of meters north. In August 1992, Hurricane Andrew breached the Island in several places, resulting in increased erosion and land loss. Until it completely eroded away, the Island underwent a cycle of washovers, vegetation removal, breaching, and erosion with sediment transport to the north. Satellite imagery shows that three such cycles occurred between 1992 and 2017, despite the partial restoration of the Island between 1998 and 2000. Each cycle increased the distance between the Island and the mainland to the east, reducing both the sediment supply from the east and the protection that Timbalier Bay and the adjacent coastal lands received from the barrier island. Previously, the U.S. Geological Survey (USGS) National Civil Applications Center used 1-meter resolution imagery archived at the USGS Global Fiducials Library (GFL), collected between 2000 and 2010 by U.S. National Imaging Systems, to monitor the changes at the Island. New research expands this study retrospectively and prospectively using aerial photography collected from 1953 to 2012 and in 2020; declassified imagery collected in 1962, 1972, and 1975; DigitalGlobe satellite imagery collected since 2004; Landsat satellite imagery collected since 1972; Sentinel–2 satellite imagery collected since 2015; and GFL imagery collected from 1991 to 2020.

Louisiana↗
USGS2001

Mapping crustal heterogeneity using Lg propagation efficiency throughout the Middle East, Mediterranean, Southern Europe and Northern Africa

In this paper we describe a technique for mapping the lateral variation of Lg characteristics such as Lg blockage, efficient Lg propagation, and regions of very high attenuation in the Middle East, North Africa, Europe and the Mediterranean regions. Lg is used in a variety of seismological applications from magnitude estimation to identification of nuclear explosions for monitoring compliance with the Comprehensive Nuclear-Test-Ban Treaty (CTBT). These applications can give significantly biased results if the Lg phase is reduced or blocked by discontinuous structure or thin crust. Mapping these structures using quantitative techniques for determining Lg amplitude attenuation can break down when the phase is below background noise. In such cases Lg blockage and inefficient propagation zones are often mapped out by hand. With our approach, we attempt to visually simplify this information by imaging crustal structure anomalies that significantly diminish the amplitude of Lg. The visualization of such anomalies is achieved by defining a grid of cells that covers the entire region of interest. We trace Lg rays for each event/ station pair, which is simply the great circle path, and attribute to each cell a value equal to the maximum value of the Lg/P-coda amplitude ratio for all paths traversing that particular cell. The resulting map, from this empirical approach, is easily interpreted in terms of crustal structure and can successfully image small blockage features often missed by analysis of raypaths alone. This map can then be used to screen out events with blocked Lg prior to performing Q tomography, and to avoid using Lg-based methods of event identification for the CTBT in regions where they cannot work. For this study we applied our technique to one of the most tectonically complex regions on the earth. Nearly 9000 earthquake/station raypaths, traversing the vast region comprised of the Middle East, Mediterranean, Southern Europe and Northern Africa, have been analyzed. We measured the amplitude of Lg relative to the P-coda and mapped the lateral variation of Lg propagation efficiency. With the relatively dense coverage provided by the numerous crossing paths we are able to map out the pattern of crustal heterogeneity that gives rise to the observed character of Lg propagation. We observe that the propagation characteristics of Lg within the region of interest are very complicated but are readily correlated with the different tectonic environments within the region. For example, clear strong Lg arrivals are observed for paths crossing the stable continental interiors of Northern Africa and the Arabian Shield. In contrast, weakened to absent Lg is observed for paths crossing much of the Middle East, and Lg is absent for paths traversing the Mediterranean. Regions that block Lg transmission within the Middle East are very localized and include the Caspian Sea, the Iranian Plateau and the Red Sea. Resolution is variable throughout the region and strongly depends on the distribution of seismicity and recording stations. Lg propagation is best resolved within the Middle East where regions of crustal heterogeneity on the order of 100 km are imaged (e.g., South Caspian Sea and Red Sea). Crustal heterogeneity is resolvable but is poorest in seismically quiescent Northern Africa.

Pure and Applied Geophysics↗
USGS2015

Mapping geoelectric fields during magnetic storms: Synthetic analysis of empirical United States impedances

Empirical impedance tensors obtained from EarthScope magnetotelluric data at sites distributed across the midwestern United States are used to examine the feasibility of mapping magnetic storm induction of geoelectric fields. With these tensors, in order to isolate the effects of Earth conductivity structure, we perform a synthetic analysis—calculating geoelectric field variations induced by a geomagnetic field that is geographically uniform but varying sinusoidally with a chosen set of oscillation frequencies that are characteristic of magnetic storm variations. For north-south oriented geomagnetic oscillations at a period of T 0 =100 s, induced geoelectric field vectors show substantial geographically distributed differences in amplitude (approximately a factor of 100), direction (up to 130 ∘ ), and phase (over a quarter wavelength). These differences are the result of three-dimensional Earth conductivity structure, and they highlight a shortcoming of one-dimensional conductivity models (and other synthetic models not derived from direct geophysical measurement) that are used in the evaluation of storm time geoelectric hazards for the electric power grid industry. A hypothetical extremely intense magnetic storm having 500 nT amplitude at T 0 =100 s would induce geoelectric fields with an average amplitude across the midwestern United States of about 2.71 V/km, but with a representative site-to-site range of 0.15 V/km to 16.77 V/km. Significant improvement in the evaluation of such hazards will require detailed knowledge of the Earth's interior three-dimensional conductivity structure.

Geophysical Research Letters↗
USGS2004

Stress-induced, time-dependent fracture closure at hydrothermal conditions

Time-dependent closure of fractures in quartz was measured in situ at 22–530°C temperature and 0.1-150 MPa water pressure. Unlike previous crack healing and rock permeability studies, in this study, fracture aperture is monitored directly and continuously using a windowed pressure vessel, a long-working-distance microscope, and reflected-light interferometry. Thus the fracture volume and geometry can be measured as a function of time, temperature, and water pressure. Relatively uniform closure occurs rapidly at temperatures and pressures where quartz becomes significantly soluble in water. During closure the aperture is reduced by as much as 80% in a few hours. We infer that this closure results from the dissolution of small particles or asperities that prop the fracture open. The driving force for closure via dissolution of the prop is the sum of three chemical potential terms: (1) the dissolution potential, proportional to the logarithm of the degree of undersaturation of the solution; (2) the coarsening potential, proportional to the radius of curvature of the prop; and (3) the pressure solution potential, proportional to the effective normal stress at the contact between propping particles and the fracture wall. Our observations suggest that closure is controlled by a pressure solution-like process. The aperture of dilatant fractures and microcracks in the Earth that are similar to those in our experiments, such as ones generated from thermal stressing or brittle failure during earthquake rupture and slip, will decrease rapidly with time, especially if the macroscopic stress is nonhydrostatic.

Journal of Geophysical Research B: Solid Earth↗
USGS2023

Distribution of rare earth and other critical elements in lignites from the Eocene Jackson Group, Texas

Coal is increasingly evaluated as a source of rare earth elements (REEs) in the United States to address the overreliance on imported REEs. The objective of this study was to assess the distribution of REEs in lignites from selected mining areas in the Texas Gulf Coastal Plain region. Thirty-one archived lignite and rock samples previously collected by the U.S. Geological Survey were analyzed for their rare earth element and critical mineral content. These include samples from one core (5400 and 5500 lignite horizons) and two opencast lignite mines (Gibbons Creek 3500 and 4500 horizons, and San Miguel horizons A to D) in the Eocene Jackson Group of the Texas Gulf of Mexico Coastal Plain. Some lithologies in the Gibbons Creek 3500 and 4500 lignite-bearing sections have high total rare earth, yttrium (Y), and scandium (Sc) (REYSc) values, up to 7800 ppm (ash basis) REYSc. The lignite lithologies show an enrichment in rare earths, [samarium (Sm) through gadolinium (Gd)]. The basal Gibbons Creek 3500 lignite bench shows a heavy rare earth element enrichment pattern resembling that often seen in peats through high volatile A bituminous coals. The 5500 lignite sequence, overlying the latter lignite sections, shows a light rare earth enrichment. The San Miguel lignite benches have heavy rare earth enrichments with a negative europium (Eu) anomaly.

Texas↗
USGS2005

Landsat: A global land-observing program

Landsat represents the world’s longest continuously acquired collection of space-based land remote sensing data. The Landsat Project is a joint initiative of the U.S. Geological Survey (USGS) and the National Aeronautics and Space Administration (NASA) designed to gather Earth resource data from space. NASA developed and launched the spacecrafts, while the USGS handles the operations, maintenance, and management of all ground data reception, processing, archiving, product generation, and distribution. Landsat satellites have been collecting images of the Earth’s surface for more than thirty years. Landsat’s Global Survey Mission is to repeatedly capture images of the Earth’s land mass, coastal boundaries, and coral reefs, and to ensure that sufficient data are acquired to support the observation of changes on the Earth’s land surface and surrounding environment. NASA launched the first Landsat satellite in 1972, and the most recent one, Landsat 7, in 1999. Landsats 5 and 7 continue to capture hundreds of additional images of the Earth’s surface each day. These images provide a valuable resource for people who work

Fact Sheet↗
USGS2011

Coulomb 3.3 Graphic-rich deformation and stress-change software for earthquake, tectonic, and volcano research and teaching-user guide

Coulomb is intended both for publication-directed research and for college and graduate school classroom instruction. We believe that one learns best when one can see the most and can explore alternatives quickly. So the principal feature of Coulomb is ease of input, rapid interactive modification, and intuitive visualization of the results. The program has menus and check-items, and dialogue boxes to ease operation. The internal graphics are suitable for publication, and can be easily imported into Illustrator, GMT, Google Earth, or Flash for further enhancements. Coulomb is designed to let one calculate static displacements, strains, and stresses at any depth caused by fault slip, magmatic intrusion, or dike expansion/contraction. One can calculate static displacements (on a surface or at GPS stations), strains, and stresses caused by fault slip, magmatic intrusion, or dike expansion. Problems, such as how an earthquake promotes or inhibits failure on nearby faults, or how fault slip or dike expansion will compress a nearby magma chamber, are germane to Coulomb. Geologic deformation associated with strike-slip faults, normal faults, or fault-bend folds is also a useful application. Calculations are made in an elastic halfspace with uniform isotropic elastic properties following Okada (1992)-see list of key papers in section 1.9. There is substantial evidence to support the hypothesis that faults interact by the transfer of stress, both on the time scales of earthquake sequences and aftershocks and on longer time scales associated with the interevent time of the largest shocks that occur in a given region. There is also evidence that faults and magmatic systems interact as well, and that static stress changes influence intrusions and eruptions. Processes not included in Coulomb are also important, such as dynamic stresses, pore-fluid diffusion, and viscoelastic rebound. Further, elastic stiffness differences between basins and crustal layering modify the stresses in comparison to the elastic halfspace implemented in Coulomb. Nevertheless, we believe that a simple tool that permits exploration of a key component of earthquake interaction has great value for understanding and discovery. To download the software (a MATLAB application) and tutorial files, please go to http://www.coulombstress.org

Open-File Report↗
USGS2009

Carbonatites of the world, explored deposits of Nb and REE— Database and grade and tonnage models

This report is based on published tonnage and grade data on 58 Nb- and rare-earth-element (REE)-bearing carbonatite deposits that are mostly well explored and are partially mined or contain resources of these elements. The deposits represent only a part of the known 527 carbonatites around the world, but they are characterized by reliable quantitative data on ore tonnages and grades of niobium and REE. Grade and tonnage models are an important component of mineral resource assessments. Carbonatites present one of the main natural sources of niobium and rare-earth elements, the economic importance of which grows consistently. A purpose of this report is to update earlier publications. New information about known deposits, as well as data on new deposits published during the last decade, are incorporated in the present paper. The compiled database (appendix 1; linked to right) contains 60 explored Nb- and REE-bearing carbonatite deposits - resources of 55 of these deposits are taken from publications. In the present updated grade-tonnage model we have added 24 deposits comparing with the previous model of Singer (1998). Resources of most deposits are residuum ores in the upper part of carbonatite bodies. Mineral-deposit models are important in exploration planning and quantitative resource assessments for two reasons: (1) grades and tonnages among deposit types vary significantly, and (2) deposits of different types are present in distinct geologic settings that can be identified from geologic maps. Mineral-deposit models combine the diverse geoscience information on geology, mineral occurrences, geophysics, and geochemistry used in resource assessments and mineral exploration. Globally based deposit models allow recognition of important features and demonstrate how common different features are. Well-designed deposit models allow geologists to deduce possible mineral-deposit types in a given geologic environment, and the grade and tonnage models allow economists to estimate the possible economic viability of these resources. Thus, mineral-deposit models play a central role in presenting geoscience information in a useful form to policy makers. The foundation of mineral-deposit models is information about known deposits. This publication presents the latest geologic information and newly developed grade and tonnage models for Nb- and REE-carbonatite deposits in digital form. The publication contains computer files with information on deposits from around the world. It also contains a text file allowing locations of all deposits to be plotted in geographic information system (GIS) programs. The data are presented in FileMaker Pro as well as in .xls and text files to make the information available to a broadly based audience. The value of this information and any derived analyses depends critically on the consistent manner of data gathering. For this reason, we first discuss the rules used in this compilation. Next, the fields of the database are explained. Finally, we provide new grade and tonnage models and analysis of the information in the file.

Open-File Report↗
USGS1975

Use of USGS earth science products by city planning agencies in the San Francisco Bay region, California

An inventory of the use of USGS products in selected planning studies, plans, plan implementation devices, and other planning-related activities was completed for the ninety-one cities in the nine-county San Francisco Bay region. This inventory was designed to determine and document the use of the 85 earth science products prepared as a part of the San Francisco Bay Region Environment and Resources Planning Study (SFBRS). This inventory showed that: (1) three-fourths of the cities had planning staffs who were familiar with SFBRS products, or had made use of such products; (2) over half of the cities had prepared planning documents which contained references to SFBRS products; (3) the types of planning applications most often indicated were: geologic hazards studies; seismic safety, public safety, conservation, and open-space plan elements; general reference; and the preparation and review of environmental impact reports and statements; (4) almost 90 percent of all 85 SFBRS products were used at least once for a city planning activity, and one product was used at least 67 times for various city planning activities; and (5) at least forty-five other other USGS products were also used for various city planning activities. All of the seven SFBRS products that were used 30 or more times for city planning activities were small-scale, large-areal-coverage, hazard-type products. Each product is interpretative and contains additional data which makes it more relevant or more interesting. The planning staffs of each city were also interviewed and asked to indicate any problems in the use of the SFBRS products, to recommend improvements, and to identify any needed or desired earth science data. The responses showed that: (1) the map scales commonly used by cities were much larger than 1:12,000; (2) few cities had planning staffs with training or experience in the earth sciences or engineering; (3) less than one-fourth of the cities failed to use SFBRS products-primarily because their staffs were unaware of the SFBRS, unfamiliar with its products, or lacked adequate capability; (4) almost two-thirds of the cities expressed some problems in using the products-primarily scale and detail; (5) over two-thirds of the cities expressed an interest in continuing to use, or planning to use, the SFBRS products in the future, and a need or desire for additional earth science, engineering or other data; and (6) over one-half of the cities suggested improvements-primarily larger scale or more detail and less technical or more interpretative products. From the inventory and responses to the interviews, it is concluded that the cities in the Bay region have considerable familiarity with, and have made substantial use of, SFBRS products. This use was made by many cities despite their small size, limited staff capability, and the design of the products which was intended primarily for regional planning at a regional scale. Suggestions are made to ensure more familiarity with, and more effective use of, earth science data in the future. These suggestions include: (1) providing engineering interpretations and land-use capability ratings to make earth science data more readily usable; (2) monitoring and analyzing new state laws and regulations to better anticipate and respond to local earth science data needs; (3) including technical assistance with any earth science data designed for planners and decision-makers; (4) providing larger scale and greater detail earth science data on a demonstration basis; (5) giving priority to urban and urbanizing areas so as to conserve limited staff resources; and (6) ensuring product distribution to all potential users.

California↗