SEARCH · Search USGS

Results for “Journal of Remote Sensing”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10Linked to original sources

USGS2011

Assessment of mangrove forests in the Pacific region using Landsat imagery

The information on the mangrove forests for the Pacific region is scarce or outdated. A regional assessment based on a consistent methodology and data sources was needed to understand their true extent. Our investigation offers a regionally consistent, high resolution (30 m), and the most comprehensive mapping of mangrove forests on the islands of American Samoa, Fiji, French Polynesia, Guam, Hawaii, Kiribati, Marshall Islands, Micronesia, Nauru, New Caledonia, Northern Mariana Islands, Palau, Papua New Guinea, Samoa, Solomon Islands, Tonga, Tuvalu, Vanuatu, and Wallis and Futuna Islands for the year 2000. We employed a hybrid supervised and unsupervised image classification technique on a total of 128 Landsat scenes gathered between 1999 and 2004, and validated the results using existing geographic information science (GIS) datasets, high resolution imagery, and published literature. We also draw a comparative analysis with the mangrove forests inventory published by the Food and Agriculture Association (FAO) of the United Nations. Our estimate shows a total of 623755 hectares of mangrove forests in the Pacific region; an increase of 18% from FAO's estimates. Although mangrove forests are disproportionately distributed toward a few larger islands on the western Pacific, they are also significant in many smaller islands.

Journal of Applied Remote Sensing↗

USGS2011

Characterization of the Sonoran desert as a radiometric calibration target for Earth observing sensors

To provide highly accurate quantitative measurements of the Earth's surface, a comprehensive calibration and validation of the satellite sensors is required. The NASA Moderate Resolution Imaging Spectroradiometer (MODIS) Characterization Support Team, in collaboration with United States Geological Survey, Earth Resources Observation and Science Center, has previously demonstrated the use of African desert sites to monitor the long-term calibration stability of Terra MODIS and Landsat 7 (L7) Enhanced Thematic Mapper plus (ETM+). The current study focuses on evaluating the suitability of the Sonoran Desert test site for post-launch long-term radiometric calibration as well as cross-calibration purposes. Due to the lack of historical and on-going in situ ground measurements, the Sonoran Desert is not usually used for absolute calibration. An in-depth evaluation (spatial, temporal, and spectral stability) of this site using well calibrated L7 ETM+ measurements and local climatology data has been performed. The Sonoran Desert site produced spatial variability of about 3 to 5% in the reflective solar regions, and the temporal variations of the site after correction for view-geometry impacts were generally around 3%. The results demonstrate that, barring the impacts due to occasional precipitation, the Sonoran Desert site can be effectively used for cross-calibration and long-term stability monitoring of satellite sensors, thus, providing a good test site in the western hemisphere.

Sonoran Desert↗

USGS2011

Mapping rice areas of South Asia using MODIS multitemporal data

Our goal is to map the rice areas of six South Asian countries using moderate-resolution imaging spectroradiometer (MODIS) time-series data for the time period 2000 to 2001. South Asia accounts for almost 40% of the world's harvested rice area and is also home to 74% of the population that lives on less than $2.00 a day. The population of the region is growing faster than its ability to produce rice. Thus, accurate and timely assessment of where and how rice is cultivated is important to craft food security and poverty alleviation strategies. We used a time series of eight-day, 500-m spatial resolution composite images from the MODIS sensor to produce rice maps and rice characteristics (e.g., intensity of cropping, cropping calendar) taking data for the years 2000 to 2001 and by adopting a suite of methods that include spectral matching techniques, decision trees, and ideal temporal profile data banks to rapidly identify and classify rice areas over large spatial extents. These methods are used in conjunction with ancillary spatial data sets (e.g., elevation, precipitation), national statistics, and maps, and a large volume of field-plot data. The resulting rice maps and statistics are compared against a subset of independent field-plot points and the best available subnational statistics on rice areas for the main crop growing season (kharif season). A fuzzy classification accuracy assessment for the 2000 to 2001 rice-map product, based on field-plot data, demonstrated accuracies from 67% to 100% for individual rice classes, with an overall accuracy of 80% for all classes. Most of the mixing was within rice classes. The derived physical rice area was highly correlated with the subnational statistics with R 2 values of 97% at the district level and 99% at the state level for 2000 to 2001. These results suggest that the methods, approaches, algorithms, and data sets we used are ideal for rapid, accurate, and large-scale mapping of paddy rice as well as for generating their statistics over large areas.

South Asia↗

USGS2013

Vegetation greenness trend (2000 to 2009) and the climate controls in the Qinghai-Tibetan Plateau

The Qinghai-Tibetan Plateau has been experiencing a distinct warming trend, and climate warming has a direct and quick impact on the alpine grassland ecosystem. We detected the greenness trend of the grasslands in the plateau using Moderate Resolution Imaging Spectroradiometer data from 2000 to 2009. Weather station data were used to explore the climatic drivers for vegetation greenness variations. The results demonstrated that the region-wide averaged normalized difference vegetation index (NDVI) increased at a rate of 0.036 yr −1 . Approximately 20% of the vegetation areas, which were primarily located in the northeastern plateau, exhibited significant NDVI increase trend (p-value <0.05). Only 4% of the vegetated area showed significant decrease trends, which were mostly in the central and southwestern plateau. A strong positive relationship between NDVI and precipitation, especially in the northeastern plateau, suggested that precipitation was a favorable factor for the grassland NDVI. Negative correlations between NDVI and temperature, especially in the southern plateau, indicated that higher temperature adversely affected the grassland growth. Although a warming climate was expected to be beneficial to the vegetation growth in cold regions, the grasslands in the central and southwestern plateau showed a decrease in trends influenced by increased temperature coupled with decreased precipitation.

Tibet;Qinghai↗

USGS1984

Computer-assisted cartography: an overview.

An assessment of the current status of computer-assisted cartography, in part, is biased by one's view of the cartographic process as a whole. From a traditional viewpoint we are concerned about automating the mapping process; from a progressive viewpoint we are concerned about using the tools of computer science to convey spatial information. On the surface these viewpoints appear to be in opposition. However, it is postulated that in the final analysis, they face the same goal. This overview uses the perspectives from two viewpoints to depict the current state of computer-assisted cartography and speculate on future goals, trends, and challenges.-Authors

South African Journal of Photogrammetry, Remote Se↗

USGS2010

EAARL coastal topography-western Florida, post-Hurricane Charley, 2004: seamless (bare earth and submerged.

Project Description These remotely sensed, geographically referenced elevation measurements of lidar-derived seamless (bare-earth and submerged) topography were produced as a collaborative effort between the U.S. Geological Survey (USGS), Coastal and Marine Geology Program (CMGP), St. Petersburg, FL, and the National Aeronautics and Space Administration (NASA), Wallops Flight Facility, VA. This project provides highly detailed and accurate datasets of a portion of the western Florida coastline beachface, acquired post-Hurricane Charley on August 17 and 18, 2004. The datasets are made available for use as a management tool to research scientists and natural-resource managers. An innovative airborne lidar instrument originally developed at the NASA Wallops Flight Facility, and known as the Experimental Advanced Airborne Research Lidar (EAARL), was used during data acquisition. The EAARL system is a raster-scanning, waveform-resolving, green-wavelength (532-nanometer) lidar designed to map near-shore bathymetry, topography, and vegetation structure simultaneously. The EAARL sensor suite includes the raster-scanning, water-penetrating full-waveform adaptive lidar, a down-looking red-green-blue (RGB) digital camera, a high-resolution multispectral color infrared (CIR) camera, two precision dual-frequency kinematic carrier-phase GPS receivers, and an integrated miniature digital inertial measurement unit, which provide for sub-meter georeferencing of each laser sample. The nominal EAARL platform is a twin-engine Cessna 310 aircraft, but the instrument may be deployed on a range of light aircraft. A single pilot, a lidar operator, and a data analyst constitute the crew for most survey operations. This sensor has the potential to make significant contributions in measuring sub-aerial and submarine coastal topography within cross-environmental surveys. Elevation measurements were collected over the survey area using the EAARL system, and the resulting data were then processed using the Airborne Lidar Processing System (ALPS), a custom-built processing system developed in a NASA-USGS collaboration. ALPS supports the exploration and processing of lidar data in an interactive or batch mode. Modules for presurvey flight-line definition, flight-path plotting, lidar raster and waveform investigation, and digital camera image playback have been developed. Processing algorithms have been developed to extract the range to the first and last significant return within each waveform. ALPS is used routinely to create maps that represent submerged or sub-aerial topography. Specialized filtering algorithms have been implemented to determine the 'bare earth' under vegetation. For more information about similar projects, please visit the Decision Support for Coastal Science and Management website. Selected References Brock, J.C., Wright, C.W., Sallenger, A.H., Krabill, W.B., and Swift, R.N., 2002, Basis and methods of NASA airborne topographic mapper Lidar surveys for coastal studies: Journal of Coastal Research, v. 18, no. 1, p. 1-13. Crane, Michael, Clayton, Tonya, Raabe, Ellen, Stoker, Jason, Handley, Larry, Bawden, Gerald, Morgan, Karen, and Queija, Vivian, 2004, Report of the U.S. Geological Survey Lidar workshop sponsored by the Land Remote Sensing Program and held in St. Petersburg, FL, November 2002: U.S. Geological Survey Open-File Report 2004-1456, 72 p. Nayegandhi, Amar, Brock, J.C., and Wright, C.W., 2009, Small-footprint, waveform-resolving Lidar estimation of submerged and sub-canopy topography in coastal environments: International Journal of Remote Sensing, v. 30, no. 4, p. 861-878. Sallenger, A.H., Wright, C.W., and Lillycrop, Jeff, 2005, Coastal impacts of the 2004 hurricanes measured with airborne Lidar; initial results: Shore and Beach, v. 73, nos. 2-3, p. 10-14. Resources Included Readme.txt File

Data Series↗

USGS2018

A 30-m landsat-derived cropland extent product of Australia and China using random forest machine learning algorithm on Google Earth Engine cloud computing platform

Mapping high resolution (30-m or better) cropland extent over very large areas such as continents or large countries or regions accurately, precisely, repeatedly, and rapidly is of great importance for addressing the global food and water security challenges. Such cropland extent products capture individual farm fields, small or large, and are crucial for developing accurate higher-level cropland products such as cropping intensities, crop types, crop watering methods (irrigated or rainfed), crop productivity, and crop water productivity. It also brings many challenges that include handling massively large data volumes, computing power, and collecting resource intensive reference training and validation data over complex geographic and political boundaries. Thereby, this study developed a precise and accurate Landsat 30-m derived cropland extent product for two very important, distinct, diverse, and large countries: Australia and China. The study used of eight bands (blue, green, red, NIR, SWIR1, SWIR2, TIR1, and NDVI) of Landsat-8 every 16-day Operational Land Imager (OLI) data for the years 2013–2015. The classification was performed by using a pixel-based supervised random forest (RF) machine learning algorithm (MLA) executed on the Google Earth Engine (GEE) cloud computing platform. Each band was time-composited over 4–6 time-periods over a year using median value for various agro-ecological zones (AEZs) of Australia and China. This resulted in a 32–48-layer mega-file data-cube (MFDC) for each of the AEZs. Reference training and validation data were gathered from: (a) field visits, (b) sub-meter to 5-m very high spatial resolution imagery (VHRI) data, and (c) ancillary sources such as from the National agriculture bureaus. Croplands versus non-croplands knowledge base for training the RF algorithm were derived from MFDC using 958 reference-training samples for Australia and 2130 reference-training samples for China. The resulting 30-m cropland extent product was assessed for accuracies using independent validation samples: 900 for Australia and 1972 for China. The 30-m cropland extent product of Australia showed an overall accuracy of 97.6% with a producer’s accuracy of 98.8% (errors of omissions = 1.2%), and user’s accuracy of 79% (errors of commissions = 21%) for the cropland class. For China, overall accuracies were 94% with a producer’s accuracy of 80% (errors of omissions = 20%), and user’s accuracy of 84.2% (errors of commissions = 15.8%) for cropland class. Total cropland areas of Australia were estimated as 35.1 million hectares and 165.2 million hectares for China. These estimates were higher by 8.6% for Australia and 3.9% for China when compared with the traditionally derived national statistics. The cropland extent product further demonstrated the ability to estimate sub-national cropland areas accurately by providing an R 2 value of 0.85 when compared with province-wise cropland areas of China. The study provides a paradigm-shift on how cropland maps are produced using multi-date remote sensing. These products can be browsed at www.croplands.org and made available for download at NASA’s Land Processes Distributed Active Archive Center (LP DAAC) https://www.lpdaac.usgs.gov/node/1282 .

ISPRS Journal of Photogrammetry and Remote Sensing↗

USGS2020

Corrigendum to "A remote sensing-based model of tidal marsh aboveground carbon stocks for the conterminous United States" [ISPRS J. Photogram. Rem. Sens.139 (2018) 255-271]

The authors regret that two thirds of the San Francisco Bay biomass data included in the Landsat random forest models were not scaled to the proper units of grams per square meter. This error affects the Landsat-only models in the article, which are models #1-4 shown in Table 6. The authors have thoroughly investigated the error and found that the final random forest model, including the selected dependent and independent variables, is still the most appropriate model for representing CONUS-wide tidal marsh aboveground biomass and carbon (C). Using the properly scaled biomass data we have corrected remote sensing-based estimates of tidal marsh aboveground biomass and C stocks, and we have corrected Tables 4, 6, 7 and 8 and Figures 5, 6, and 9 of the original article.

ISPRS Journal of Photogrammetry and Remote Sensing↗

USGS1974

Remote sensing for identification and classification of wetland vegetation

Multispectral photography and ground truth were obtained on an area 12 miles (19.3 km) east of Bemidji, Minnesota, to identify and map wetlands less than 2 acres (0.8 hectare) in size, to map emergent vegetation in lakes, and to explore the feasibility of classifying vegetation from aerial photographs. Wetlands less than 2 acres in size were identified on photography taken in May 1971, and emergent vegetation was recorded on purposely overexposed infrared black and white photography from a flight in September 1971. Several vegetation types and species groups were recognizable with the aid of color, color infrared, and black and white infrared photography. Proper timing of flights, use of multispectral photography, and knowledge of the ecology of the area are considered essential for wetland mapping by remote sensing.

Minnesota↗

USGS1978

A selected bibliography: Remote sensing applications for tropical and subtropical vegetation analysis

This bibliography contains 425 citations of selected technical reports, journal articles, and other publications covering the general subject of tropical and subtropical vegetation analysis. Functionally related topics that include vegetation analysis are included for completeness, and citations have been organized under the following subheadings for ease of reference: remote sensing application overviews, vegetation (general), forestry, grasslands/savannah/shrublands, agriculture, land use/thematic mapping, and integrated surveys/multiple resource analysis/land systems. The terms "tropics and subtropics" are used in the widest context to include applications related to a broad range of equatorial environments. The bibliography contains selected citations published between 1924 and 1978. Many foreign language and non U.S.- source items are included.

Report↗

USGS2014

Spectroscopic remote sensing of plant stress at leaf and canopy levels using the chlorophyll 680 nm absorption feature with continuum removal

This paper explores the use of spectral feature analysis to detect plant stress in visible/near infrared wavelengths. A time series of close range leaf and canopy reflectance data of two plant species grown in hydrocarbon-contaminated soil was acquired with a portable spectrometer. The ProSpecTIR-VS airborne imaging spectrometer was used to obtain far range hyperspectral remote sensing data over the field experiment. Parameters describing the chlorophyll 680 nm absorption feature (depth, width, and area) were derived using continuum removal applied to the spectra. A new index, the Plant Stress Detection Index (PSDI), was calculated using continuum-removed values near the chlorophyll feature centre (680 nm) and on the green-edge (560 and 575 nm). Chlorophyll feature’s depth, width and area, the PSDI and a narrow-band normalised difference vegetation index were evaluated for their ability to detect stressed plants. The objective was to analyse how the parameters/indices were affected by increasing degrees of plant stress and to examine their utility as plant stress indicators at the remote sensing level (e.g. airborne sensor). For leaf data, PSDI and the chlorophyll feature area revealed the highest percentage (67–70%) of stressed plants. The PSDI also proved to be the best constraint for detecting the stress in hydrocarbon-impacted plants with field canopy spectra and airborne imaging spectroscopy data. This was particularly true using thresholds based on the ASD canopy data and considering the combination of higher percentage of stressed plants detected (across the thresholds) and fewer false-positives.

Paulinia↗

USGS2019

Mapping irrigated cropland extent across the conterminous United States at 30 m resolution using a semi-automatic training approach on Google Earth Engine

Accurate and timely information on the distribution of irrigated croplands is crucial to research on agriculture, water availability, land use, and climate change. While agricultural land use has been well characterized, less attention has been paid specifically to croplands that are irrigated, in part due to the difficulty in mapping and distinguishing irrigation in satellite imagery. In this study, we developed a semi-automatic training approach to rapidly map irrigated croplands across the conterminous United States (CONUS) at 30 m resolution using Google Earth Engine. To resolve the issue of lacking nationwide training data, we generated two intermediate irrigation maps by segmenting Landsat-derived annual maximum greenness and enhanced vegetation index using county-level thresholds calibrated from an existing coarse resolution irrigation map. The resulting intermediate maps were then spatially filtered to provide a training data pool for most areas except for the upper midwestern states where we visually collected samples. We then used random samples extracted from the training pool along with remote sensing-derived features and climate variables to train ecoregion-stratified random forest classifiers for pixel-level classification. For ecoregions with a large training pool, the procedure of sample extraction, classifier training, and classification was conducted 10 times to obtain stable classification results. The resulting 2012 Landsat-based irrigation dataset (LANID) identified 23.3 million hectares of irrigated croplands in CONUS. A quantitative assessment of LANID showed superior accuracy to currently available maps, with a mean Kappa value of 0.88 (0.75–0.99), overall accuracy of 94% (87.5–99%), and producer’s and user’s accuracy of the irrigation class of 97.3% and 90.5%, respectively, at the aquifer level. Evaluation of feature importance indicated that Landsat-derived features played the primary role in classification in relatively arid regions while climate variables were important in the more humid eastern states. This methodology has the potential to produce annual irrigation maps for CONUS and provide insights into the field-level spatial and temporal aspects of irrigation.

conterminous United States↗

USGS2013

Semi-automted analysis of high-resolution aerial images to quantify docks in Upper Midwest glacial lakes

Lake resources can be negatively affected by environmental stressors originating from multiple sources and different spatial scales. Shoreline development, in particular, can negatively affect lake resources through decline in habitat quality, physical disturbance, and impacts on fisheries. The development of remote sensing techniques that efficiently characterize shoreline development in a regional context could greatly improve management approaches for protecting and restoring lake resources. The goal of this study was to develop an approach using high-resolution aerial photographs to quantify and assess docks as indicators of shoreline development. First, we describe a dock analysis workflow that can be used to quantify the spatial extent of docks using aerial images. Our approach incorporates pixel-based classifiers with object-based techniques to effectively analyze high-resolution digital imagery. Second, we apply the analysis workflow to quantify docks for 4261 lakes managed by the Minnesota Department of Natural Resources. Overall accuracy of the analysis results was 98.4% (87.7% based on ) after manual post-processing. The analysis workflow was also 74% more efficient than the time required for manual digitization of docks. These analyses have immediate relevance for resource planning in Minnesota, whereas the dock analysis workflow could be used to quantify shoreline development in other regions with comparable imagery. These data can also be used to better understand the effects of shoreline development on aquatic resources and to evaluate the effects of shoreline development relative to other stressors.

Minnesota↗

USGS2013

An approach for characterizing the distribution of shrubland ecosystem components as continuous fields as part of NLCD

Characterizing and quantifying distributions of shrubland ecosystem components is one of the major challenges for monitoring shrubland vegetation cover change across the United States. A new approach has been developed to quantify shrubland components as fractional products within National Land Cover Database (NLCD). This approach uses remote sensing data and regression tree models to estimate the fractional cover of shrubland ecosystem components. The approach consists of three major steps: field data collection, high resolution estimates of shrubland ecosystem components using WorldView-2 imagery, and coarse resolution estimates of these components across larger areas using Landsat imagery. This research seeks to explore this method to quantify shrubland ecosystem components as continuous fields in regions that contain wide-ranging shrubland ecosystems. Fractional cover of four shrubland ecosystem components, including bare ground, herbaceous, litter, and shrub, as well as shrub heights, were delineated in three ecological regions in Arizona, Florida, and Texas. Results show that estimates for most components have relatively small normalized root mean square errors and significant correlations with validation data in both Arizona and Texas. The distribution patterns of shrub height also show relatively high accuracies in these two areas. The fractional cover estimates of shrubland components, except for litter, are not well represented in the Florida site. The research results suggest that this method provides good potential to effectively characterize shrubland ecosystem conditions over perennial shrubland although it is less effective in transitional shrubland. The fractional cover of shrub components as continuous elements could offer valuable information to quantify biomass and help improve thematic land cover classification in arid and semiarid areas.

Arizona, Florida, Texas↗

USGS2022

A novel regression method for harmonic analysis of time series

Harmonic analysis of time series is an important technique in remote sensing to reveal seasonal land surface dynamics. However, frequency selection in the harmonic analysis is often difficult because high-frequency components are useful for delineating seasonal dynamics but sensitive to noise and gaps in time series. On the other hand, it is challenging to obtain temporally continuous satellite data with high quality because of atmospheric contamination. We developed a novel regression method named Harmonic Adaptive Penalty Operator (HAPO) for harmonic analysis of unevenly distributed time series. We introduced a new penalty function to minimize unexpected fluctuations in the model, which can substantially reduce the overfitting issue of regression in time series with temporal gaps. Specifically, the new penalty function minimizes the length of the model curve and the value range difference between the model and the time series observations. We compared HAPO with three widely used regression methods (OLS: Ordinary Least Squares; LASSO: Least Absolute Shrinkage and Selection Operator; and Ridge) in different scenarios using Landsat time series data across the United States. First, we evaluated methods using the Landsat surface reflectance time series within a single year. HAPO showed low and consistent monthly Root Mean Square Deviation (RMSD) values, in which most of the time RMSD of predicted reflectance were less than 0.04. More importantly, HAPO showed consistent and less bias given varying density and irregularity of time series. Second, we evaluated methods using multi-year time series. HAPO was a better predictor of relatively short time series (< 4 years) with steady low RMSD values. When a longer time series ( 4 years) was used, all four methods showed similar RMSD values, but HAPO outperformed the other methods if there were temporal gaps. Therefore, for places with large seasonal observation gaps or for time series that are relatively short (less than 4 years), HAPO can provide more consistent and accurate results in harmonic analysis of time series.

ISPRS Journal of Photogrammetry and Remote Sensing↗

USGS2015

Advantage of hyperspectral EO-1 Hyperion over multispectral IKONOS, GeoEye-1, WorldView-2, Landsat ETM+, and MODIS vegetation indices in crop biomass estimation

Crop biomass is increasingly being measured with surface reflectance data derived from multispectral broadband (MSBB) and hyperspectral narrowband (HNB) space-borne remotely sensed data to increase the accuracy and efficiency of crop yield models used in a wide array of agricultural applications. However, few studies compare the ability of MSBBs versus HNBs to capture crop biomass variability. Therefore, we used standard data mining techniques to identify a set of MSBB data from the IKONOS, GeoEye-1, Landsat ETM+, MODIS, WorldView-2 sensors and compared their performance with HNB data from the EO-1 Hyperion sensor in explaining crop biomass variability of four important field crops (rice, alfalfa, cotton, maize). The analysis employed two-band (ratio) vegetation indices (TBVIs) and multiband (additive) vegetation indices (MBVIs) derived from Singular Value Decomposition (SVD) and stepwise regression. Results demonstrated that HNB-derived TBVIs and MBVIs performed better than MSBB-derived TBVIs and MBVIs on a per crop basis and for the pooled data: overall, HNB TBVIs explained 5–31% greater variability when compared with various MSBB TBVIs; and HNB MBVIs explained 3–33% greater variability when compared with various MSBB MBVIs. The performance of MSBB MBVIs and TBVIs improved mildly, by combining spectral information across multiple sensors involving IKONOS, GeoEye-1, Landsat ETM+, MODIS, and WorldView-2. A number of HNBs that advance crop biomass modeling were determined. Based on the highest factor loadings on the first component of the SVD, the “red-edge” spectral range (700–740 nm) centered at 722 nm (bandwidth = 10 nm) stood out prominently, while five additional and distinct portions of the recorded spectral range (400–2500 nm) centered at 539 nm, 758 nm, 914 nm, 1130 nm, 1320 nm (bandwidth = 10 nm) were also important. The best HNB vegetation indices for crop biomass estimation involved 549 and 752 nm for rice ( R 2 = 0.91); 925 and 1104 nm for alfalfa ( R 2 = 0.81); 722 and 732 nm for cotton ( R 2 = 0.97); and 529 and 895 nm for maize ( R 2 = 0.94). The higher spectral resolution of the EO-1 Hyperion hyperspectral sensor and the ability of users to choose distinct HNBs for improved crop biomass estimation outweigh the benefits that come with higher spatial resolution of MSBBs.

California↗

USGS2018

A remote sensing-based model of tidal marsh aboveground carbon stocks for the conterminous United States

Remote sensing based maps of tidal marshes, both of their extents and carbon stocks, have the potential to play a key role in conducting greenhouse gas inventories and implementing climate mitigation policies. Our objective was to generate a single remote sensing model of tidal marsh aboveground biomass and carbon that represents nationally diverse tidal marshes within the conterminous United States (CONUS). We developed the first calibration-grade, national-scale dataset of aboveground tidal marsh biomass, species composition, and aboveground plant carbon content (%C) from six CONUS regions: Cape Cod, MA, Chesapeake Bay, MD, Everglades, FL, Mississippi Delta, LA, San Francisco Bay, CA, and Puget Sound, WA. Using the random forest machine learning algorithm, we tested whether imagery from multiple sensors, Sentinel-1 C-band synthetic aperture radar, Landsat, and the National Agriculture Imagery Program (NAIP), can improve model performance. The final model, driven by six Landsat vegetation indices and with the soil adjusted vegetation index as the most important (n = 409, RMSE = 310 g/m 2 , 10.3% normalized RMSE), successfully predicted biomass for a range of marsh plant functional types defined by height, leaf angle and growth form. Model results were improved by scaling field-measured biomass calibration data by NAIP-derived 30 m fraction green vegetation. With a mean plant carbon content of 44.1% (n = 1384, 95% C.I. = 43.99%–44.37%), we generated regional 30 m aboveground carbon density maps for estuarine and palustrine emergent tidal marshes as indicated by a modified NOAA Coastal Change Analysis Program map. We applied a multivariate delta method to calculate uncertainties in regional carbon densities and stocks that considered standard error in map area, mean biomass and mean %C. Louisiana palustrine emergent marshes had the highest C density (2.67 ± 0.004 Mg/ha) of all regions, while San Francisco Bay brackish/saline marshes had the highest C density of all estuarine emergent marshes (2.03 ± 0.004 Mg/ha). Estimated C stocks for predefined jurisdictional areas ranged from 1023 ± 39 Mg in the Nisqually National Wildlife Refuge in Washington to 507,761 ± 14,822 Mg in the Terrebonne and St. Mary Parishes in Louisiana. This modeling and data synthesis effort will allow for aboveground C stocks in tidal marshes to be included in the coastal wetland section of the U.S. National Greenhouse Gas Inventory. With the increased availability of free post-processed satellite data, we provide a tractable means of modeling tidal marsh aboveground biomass and carbon at the global extent as well.

ISPRS Journal of Photogrammetry and Remote Sensing↗

USGS2021

Sentinel-2 and WorldView-3 atmospheric correction and signal normalization based on ground-truth spectroradiometric measurements

Remote sensing satellite Earth Observing Systems (EOS) provide a variety of products for monitoring Earth surface processes at varying spatial and spectral resolutions. Combining information from high and medium spatial resolution images is valuable for monitoring ground cover and vegetation status in cropland, grassland, forests, and other natural settings. However, coupling information from different EOS requires compensating for atmospheric and view angle effects before integrating comparable surface reflectance (SR) values. The objectives of this study were i) to assess how different atmospheric constituents affect the atmospheric correction results in Sentinel-2 and WorldView-3 imagery, ii) to establish a relationship with field spectra measurements, and iii) to develop an empirical approach to ensure that SR values extracted from different EOS can be normalized for use in monitoring vegetation and land cover status. We compared surface reflectance values derived from Sentinel-2 images corrected with Sen2Cor, MODTRAN or FLAASH atmospheric correction approaches for the visible-to-near infrared regions. Additionally, this information was compared to SR values extracted from WorldView-3 imagery acquired from the same dates and location (Central Spain) and corrected with MODTRAN and FLAASH approaches. Assessment of the atmospheric correction was conducted by comparing satellite image SR with ground-truth spectra acquired with a FieldSpec hand-held spectroradiometer. The results emphasized the importance of using common atmospheric parameters collected from ancillary data sources (i.e. MODIS Atmosphere & Land products) to ensure a reliable SR comparison. When compared to field-collected spectral data, SR from corrected Sentinel-2 push-broom imagery showed a reliable match (<4% difference in the visible bands and <0.52% difference in the near infrared bands). However, SR imagery from the pointable WorldView-3 instrument showed significant deviation, likely resulting from the effects of steep off-nadir acquisition angles (24.6° to 39.1°) combined with surface anisotropy. The magnitude and sign of the deviation in SR differed depending on the vegetation type, wavelength and sun-surface-sensor geometry. Therefore, it was necessary to account for angular effects to ensure reliable comparisons of imagery from the different EOS. In this study, an empirical angular correction approach was developed based on calibrating each WorldView-3 band against the ground-truth spectra. This correction allowed for the accurate signal normalization of WorldView-3 and Sentinel-2 imagery SR in the visible-to-near infrared regions.

ISPRS Journal of Photogrammetry and Remote Sensing↗