Search USGSSearch

SEARCH · Search USGS

Results for “Island Arc”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10Linked to original sources

Map showing geochemical characteristics of rock samples from the Kalmiopsis Wilderness, southwestern Oregon

This report summarizes 1,307 semiquantitative chemical analyses of rocks collected to aid int he evaluation of the mineral resources of the Kalmiopsis Wilderness, Oreg. Chemical analyses and sample location maps are presented by Grimes, Leinz, and Speckman (1981). The area is located in the Kilamath Mountains geoporphic province of southwestern Oregon, and the area's location and boundaries are shown on the accompanying map. The geology of the study area is described by Page and others (1981), Gray (1980), and Ramp (1975). The rocks of the area cosist of dismembered ophiolite, island-arc, and sedimentary rock sequesnces that lie within the Western Jurassic belt of the Klamath Mountains. All units normally found within these assemblages are present; however, thrusting ans subsequent normal faulting have disrupted the geometric relations, producing a complexly faulted series of imbricate thrust slices.

Oregon

Main Andean sinistral shear along the Cooper Bay Dislocation Zone, South Georgia?

The Cooper Bay Dislocation Zone (CBDZ) represents a major NW-SE trending tectonic boundary within the island of South Georgia that juxtaposes components of a Middle Jurassic to mid-Cretaceous island-arc and back-arc- basin system. New detailed structural data from the southern end of the dislocation zone reveal that earliest displacement along the boundary appears to have been associated with dip-slip reverse shear, characterised by widespread proto- to meso-mylonitic granitic rocks within the basement assemblage exposed to the southwest of the shear zone. Along the northeast margin, highly sheared and mylonitised metasedimentary and metabasic rocks reveal sinistral strike-slip kinematics and a sub-horizontal mineral lineation. Narrow zones of sinistral shear are locally superimposed within the basement rocks along the SW margin, that together with the presence of brittle sinistral faults suggest that the strike-slip component of deformation postdates the dip-slip. Comparison with the tectonic history of the Rocas Verdas Marginal Basin, Fuegian Andes, suggests that the sinistral shear event preserved along the CBDZ maybe be related to Late Cretaceous, main Andean orogenic transpression, although a Cenozoic event cannot to ruled out.

Open-File Report

Active volcanoes of the Kurile Islands: A reference guide for aviation users

The many volcanoes of the remote and mostly uninhabited Kurile Island arc (fig. 1; table 1) pose a serious hazard for air traffic in the North Pacific. Ash clouds from Kurile eruptions can impact some of the busiest air travel routes in the world and drift quickly into airspace managed by three countries: Russia, Japan, and the United States. Prevailing westerly winds throughout the region will most commonly send ash from any Kurile eruption directly across the parallel North Pacific airways between North America and Asia (Kristine A. Nelson, National Weather Service, oral commun., 2006; fig. 1). This report presents maps showing locations of the 36 most active Kurile volcanoes plotted on Operational Navigational Charts published by the Defense Mapping Agency (map sheets ONC F-10, F-11, and E-10; figs. 1, 2, 3, 4). These maps are intended to assist aviation and other users in the identification of restless Kurile volcanoes. A regional map is followed by three subsections of the Kurile volcanic arc (North, Central, South). Volcanoes and selected primary geographic features are labeled. All maps contain schematic versions of the principal air routes and selected air navigational fixes in this region.

Kurile Islands

Digital geologic map of the Redding 1° x 2° quadrangle, Shasta, Tehama, Humboldt, and Trinity Counties, California

The Redding 1° x 2° quadrangle in northwestern California transects the Franciscan Complex and southern Klamath Mountains province as well as parts of the Great Valley Complex, northern Great Valley, and southernmost Cascades volcanic province. The tectonostratigraphic terranes of the Klamath province represent slices of oceanic crust, island arcs, and overlying sediment that range largely from Paleozoic to Jurassic in age. The Eastern Klamath terrane forms the nucleus to which the other terranes were added westward, primarily during Jurassic time, and that package was probably accreted to North America during earliest Cretaceous time. The younger Franciscan Complex consists of a sequence of westward younging tectonostratigraphic terranes of late Jurassic to Miocene age that were accreted to North America from mid-Cretaceous through Miocene time, with the easternmost being the most strongly metamorphosed. The marine Great Valley sequence, of late Jurassic and Cretaceous age, was deposited unconformably across the southernmost Klamath rocks, but in turn was underthrust at its western margin by Eastern belt Franciscan rocks. Pliocene and Quaternary volcanic rocks and sediment of the Cascades province extend into the southeastern part of the quadrangle, abutting the northernmost part of the great central valley of California. This map and database represent a digital rendition of Open-File Report 87-257, 1987, by L.A. Fraticelli, J.P. Albers, W.P. Irwin, and M.C. Blake, Jr., with various improvements and additions.

California

Intrusions and intrusive complexes in an ophiolite near San Luis Obispo; a chemical and petrologic study

The San Luis Obispo ophiolite is a sequence of mafic and ultramafic rocks that lie as a thrust-like slice on top of Franciscan melange in the southern California Coast Range. The ophiolite comprises the classic Steinmann Trinity of basal serpentinized ultramafic rocks overlain sequentially by spilitized pillow lavas and cherts. The ophiolite is intruded by numerous diabasic dikes and several large intrusive complexes that contain peridotite, gabbro, diabase and felsic rocks. Field relations indicate that this ophiolite originated as a sequence of submarine volcanic flows and breccia units extruded onto an ultramafic basement. Later the volcanic and ultramafic rocks were intruded along their contact by mafic magma that crystallized as a stratiform complex of cumulate peridotite and gabbro. Next, this stratiform complex was intruded by diorite and albite-granite (trondhjemite) sills, which may have been produced by partial melting of gabbros in the upper levels of the stratiform complex. Finally all earlier units were intruded by diabasic sills and dikes that probably were late feeders for the pre-existing volcanic unit. All the ophiolite rocks underwent subsequent highly localized brecciation, under greenschist-facies conditions, in which felsic rocks were incipiently melted by frictional heating. The host rocks and intrusions were metamorphosed at low temperature and the mafic rocks were altered by Na- and Si-metasomatism. Despite this pervasive alteration, evidences of the formational stages of the ophiolite are preserved in disequilibrium mineral assemblages, primarily within mafic and ultramafic rocks of the intrusive complexes. Whole-rock analyses of the ophiolite suite indicate that alteration has obscured but not obliterated the original chemical character of the mafic rocks. The ophiolite diabases and basalts contain up to 6 weight percent Na 2 0 and 58 percent Si0 2 , in contrast to normal Si0 2 contents of 50 percent or less and Na 2 0 contents of less than 3 percent for unaltered oceanic and continental tholeiite basalts. However, the low K 2 0 contents (less than 0.8 percent) of all units in the ophiolite suite indicate that these rocks are not part of an alkalic kindred, but rather are altered tholeiites. Compositions of relict amphibole and plagioclase in the mafic rocks indicate that the ophiolite formed in a high-temperature environment and the deep seated rocks were metamorphosed under amphibolite-facies conditions. A later change in the environmental conditions allowed subsequent low-temperature (greenschist facies) metamorphism and metasomatism. The structure and chemistry of the San Luis Obispo ophiolite support the hypothesis that this body may represent a fragment of oceanic crust and mantle. The volcanic rocks and the intrusive complexes probably formed at a mid-ocean ridge, where conditions of high heat-flow provided the requisite high-temperature environment and promoted the production of mafic magmas. The change to low-temperature conditions probably was due to inception or acceleration of crustal spreading at that portion of the ridge where this ophiolite formed. The nature of brecciation in the ophiolite indicates that the low-temperature environment also was one of greater tectonic disturbance, relative to conditions at the ridge. This tectonically active environment probably corresponds to an island arc where the ophiolite-bearing plate was subducted in an adjacent trench. The absence of a high-pressure mineral assemblage in the San Luis Obispo ophiolite suggests that this segment of ocean-crust and upper mantle was not buried in a subduction zone, but rather was rafted on top of subduction melange (Franciscan Formation) into its present position.

California

Reconnaissance geologic map of the Harrat Tuffil Quadrangle, sheet 20/39 B, Kingdom of Saudi Arabia

The Harrat Tuffil quadrangle, sheet 20/39 B, is located between lat 20°30’ and 21°00’ N. and long 39°30’ and 40°00’ E. about 50 km southeast of Jiddah. A western belt of Proterozoic metapelites and related rocks, defined as the Sa’diyah formation, structurally underlies and locally is interlayered with Proterozoic metabasaltic rocks of oceanic chemical affinity to the east. The Sa’diyah formation and the metabasaltic rocks are tentatively correlated with the Sabya formation and Baish group. These rocks may represent a miogeosynclinal tectonic setting in the 800 to 850 Ma period of development of the southwestern Arabian Shield. The presence of aluminous metasediments suggest a continental source area, probably west of oceanic and (or) immature island-arc rocks of the Baish(?) igneous suite. The Sa’diyah formation and metabasaltic rocks are intruded by a granite gneiss batholith, probably about 600 Ma old, and by small plutons of granodiorite and syenogranite. Peraluminous monzogranite occurs within the western part of the Sa’diyah formation belt and may provide an alternate source for the aluminous politic rocks. Tentative correlation of an isolated exposure of Jurassic(?) dolomite with the Hanifa Formation significantly extends the areal range of possible Jurassic sedimentary rocks in the Tihamat province. An intense dike swarm intrudes all of the pre-Miocene rocks in the quadrangle. This Damm dike complex is named for Wadi ad Damm. Dike chemistry shows both subalkaline and alkaline bimodal suites. The Sita formation is broadly coeval with the Damm Dike complex and contains volcanic rocks with similar bimodal chemistry. The Sita formation conformably overlies and is locally interbedded with the Sumaysi formation, which is palynologically dated in the Makkah quadrangle as Eocene (~50 Ma). Potassium-argon dating indicated intrusion and volcanism over the period ~50Ma to ~20 Ma ago. The Tertiary volcanic, hypabyssal, and plutonic rocks are all light rare-earth element enriched as would be expected in a rift-related tectonic setting. These rocks represent proto-Red Sea igneous activity and are correlated with the Jizan group. Shama rhyolite near Harrat Tuffil is unconformably overlain by a boulder conglomerate correlated with the Bathan formation. Miocene alkali basalt forms a large paleovalley-fill lava flow at Harrat ad Damm and small flow remnants north of Jabal Sita. Erosional downcutting at Harrat ad Damm averaged ~10 m per MA over the past 11 Ma. Pliocene alkali basalt unconformably overlies Bathan formation and Shama rhyolite at Harrat Tuffil. The uplift of Quaternary reef limestone along the Red Sea coast indicates recent faulting as shown in the adjoining Shu’ayba and Al Ghalah quadrangles. A perlite deposit at Jabal Shama may be suitable as light aggregate for concrete. Sparse barite veins were discovered in the lower Shumaysi formation. Relatively small deposits of Sa’diyah formation marble may be of interest for local use in building or cement. The Jurassic dolomite is locally quite pure and may have economic applications.

Open-File Report

Geology and regional setting of the Al Masane ancient mine area, southeastern Arabian Shield, Kingdom of Saudi Arabia

Stratiform zinc-copper massive-sulfide deposits at Al Masane occur in thin dolomitic interbeds within Proterozoic felsic crystal tuff and mafic flows and volcaniclastics. These strata dip steeply westward and are underlain by shale and shaly graywacke to the east and overlain by lapilli crystal tuff to the west. This section is part of the Habawnah fold or mineral belt that extends from the Wadi Wassat area southward into Yemen. Western parts of the Habawnah fold belt, including the Al Masane area, are characterized by a bimodal assemblage of of phenocryst-poor basalts and sodic rhyolite crystal tuff, and by zinc-copper mineral deposits. Strata in the eastern part of the belt, mostly east of the Ashara fault zone, contain abundant phenocryst-rich mafic volcanic rocks, little felsic crystal tuff, and barren or locally nickeliferous massive pyrite deposits. Stratified rocks and gabbro sills of the Al Masane area were isoclinally folded and metamorphosed to the greenschist facies. Structural analysis indicates that foliation, lineation, joints, major and minor folds, and one of three sets of faults formed during a single east-west compressional deformational episode. Axial-plane foliation dips steeply westward and is usually coincident with bedding. Lineation plunges steeply to the northwest throughout the map area and is parallel to the intersection of joints of two major sets and to the intersection of these joints with foliation. Major folds have north-trending, gently plunging axes to which the axis of a minor fold set is essentially parallel. A second minor fold-set has a steeply plunging axis parallel to lineation. The Saadah massive-sulfide body is elongated by a fold of this system. Unmetamorphosed Proterozoic felsic sills, quartz monzonite and gabbro plutons, porphyritic diorite dikes, mafic dikes, and basalt dikes, in that apparent order, have intruded the stratified section. Basalt dikes are offset by southwestward-dipping reverse faults and by faults parallel to bedding. Malachite and metal-oxide-bearing gossans in the Al Masane area were mined in ancient times. Radiocarbon dating of charcoal in slag indicates that the ores were smelted about 1,200 years ago. Gossans are depleted in copper, silver, and zinc, relative to underlying sulfide, by factors of about 0.33, 0.2, and 0.08, respectively. Evaluation of numerous analyses of gossans, carbonates, and silicate rocks indicates that exploration for zinc-copper massive-sulfide deposits in the region should center on detailed geochemical studies of dolomitic beds. Dolomitization of host siliceous shales and tuffs and the formation of the massive-sulfide bodies at Al Masane probably caused by submarine fumarolic hydrothermal activity during periods of relative volcanic quiescence. Further work in the Al Masane region should include a study of the dolomitized areas and a search for other potential alteration "pipe" products (e.g. chlorite) as a guide to location of proximal deposits. Zinc-copper deposits at Al Masane and in the Dhahar-Al Hajrah and Kutam-Farah Garan areas have characteristics in common and are associated with felsic volcanic centers in the western bimodal part of the Habawnah mineral belt. They probably have parallel origins related to sea-floor volcanism. Deposits at Al Masane and Dhahar-Al Hajrah are possibly in the same general stratigraphic interval. Characteristics and distribution of altered rocks at Kutam suggest that the observed structural control of mineralization may represent remobilization. Chemical characteristics of volcanic rocks at Al Masane and elsewhere, along with features such as zinc-copper-iron sulfide mineralization, rhyolite-basalt bimodality, and the quartz phenocryst-rich nature of the felsic rocks, are compatible with an unusually primitive tholeiitic island-arc origin for the strata and mineral deposits of the Habawnah mineral belt.

Open-File Report

Plutonism in the central part of the Sierra Nevada Batholith, California

The Sierra Nevada batholith comprises the plutonic rocks of Mesozoic age that underlie most of the Sierra Nevada, a magnificent mountain range that originated in the Cenozoic by the westward tilting of a huge block of the Earth's crust. Scattered intrusions west of the batholith in the western metamorphic belt of the Sierra Nevada and east of the Sierra Nevada in the Benton Range and the White and Inyo Mountains are satellitic to but not strictly parts of the Sierra Nevada batholith. Nevertheless, all the plutonic rocks are related in origin. The batholith lies along the west edge of the Paleozoic North American craton, and Paleozoic and early Mesozoic oceanic crust underlies its western margin. It was emplaced in strongly deformed but weakly metamorphosed strata ranging in age from Proterozoic to Cretaceous. Sedimentary rocks of Proterozoic and Paleozoic age crop out east of the batholith in the White and Inyo Mountains, and metamorphosed sedimentary and volcanic rocks of Paleozoic and Mesozoic age crop out west of the batholith in the western metamorphic belt. A few large and many small, generally elongate remnants of metamorphic rocks lie within the batholith. Sparse fossils from metasedimentary rocks and isotopic ages for metavolcanic rocks indicate that the metamorphic rocks in the remnants range in age from Early Cambrian to Early Cretaceous. Within the map area (the Mariposa 1 0 by 2 0 quadrangle), the bedding, cleavage, and axial surfaces of folds generally trend about N. 35 0 W., parallel to the long axis of the Sierra Nevada. The country rocks comprise strongly deformed but generally coherent sequences; however, some units in the western metamorphic belt may partly consist of melanges. Most sequences are in contact with other sequences, at least for short distances, but some sequences within the batholith are bounded on one or more sides by plutonic rocks. Proterozoic and Paleozoic sedimentary strata east of the Sierra Nevada and Paleozoic strata in remnants of country rocks within the eastern part of the batholith, although strongly deformed, are autochthonous or have been displaced only short distances, whereas some Mesozoic strata in the western metamorphic belt may be allochthonous. Probably the strata in the western metamorphic belt were deposited in marginal basins and island arcs, but the possibility that they were transported from distant places has not been disproved. All the country rocks have been strongly deformed, most of them more than once. Tectonic disturbances occurred during the Devonian and Mississippian (Antler? orogeny), the Permian and (or) Early Triassic (Sonoman? orogeny), the Late Jurassic (Nevadan orogeny), and at various other times during emplacement of the batholith and uplift that accompanied and followed its emplacement. The strata in the western metamorphic belt probably were deformed in an early Mesozoic subduction complex. The plutonic rocks range in composition from gabbro to leucogranite, but tonalite, granodiorite, and granite are the most common rock types. Most are medium to coarse grained, but some small rock masses are fine grained. Most have hypidiomorphic-granular textures and are equigranular, but some having compositions close to the boundary between granite and granodiorite contain large crystals of alkali feldspar. Serpentinized ultramafic rocks are present locally in the western metamorphic belt within and adjacent to the Melones fault zone. Except for serpentinized ultramafic rocks, trondhjemite, and most granites, all the plutonic rocks contain significant amounts of hornblende. Most of the granitoids are metaluminous or weakly peraluminous; strongly peraluminous granites are present only in the White Mountains. Most of the granitoids are assigned to units of lithodemic rank, and most of these units are assigned to intrusive suites. Plutons assigned to the same lithodeme are composed of rock of similar composition, fabric, and age and are presumed to h

Professional Paper

The nature and timing of tectonism in the western facies terrane of Nevada and California; an outline of evidence and interpretations derived from geologic maps of key areas

Along the outer miogeocline of Nevada and Southern California, lower Paleozoic siliceous sediments and basalt flows, the western facies terrane emerged in Late Devonian time and were deeply eroded; but structural evidence that this event, the Antler Orogeny, involved intense folding and thrust faulting is notably scarce. Almost all the intense folding and thrust faulting of Proterozoic to Permian strata dates from the Jurassic to Eocene interval. If this tectonic history is valid, then the genesis of the Antler Orogeny is reduced to a question of vertical tectonics. Pre-Jurassic contraction involving subduction and collision with island arcs is not indicated or required, but the ultimate origin of Paleozoic tectonism remains unclear.

Professional Paper

Geological studies of the Salmon River suture zone and adjoining areas, west-central Idaho and eastern Oregon

The papers in this volume describe petrologic, structural, and geochemical studies related to geographic areas adjacent to and including the Salmon River suture zone. We therefore start this volume by defining and giving a general description of that suture zone. The western margin of the North American continent was the setting for complex terrane accretion and large-scale terrane translation during Late Cretaceous and Eocene time. In western Idaho, the boundary that separates the Paleozoic-Mesozoic accreted oceanic, island-arc rocks on the west from Precambrian continental metamorphic and sedimentary rocks on the east is called the Salmon River suture zone (SRSZ). Readers will note that the term 'Salmon River suture zone' is used in the title of this volume and in the text of several of the papers and the term 'western Idaho suture zone' is used in several other papers in this volume. Both terms refer to the same geologic feature and reflect historical usage and custom; thus no attempt has been made by the editors to impose or demand a single term by the various authors of this volume. The suture zone is marked by strong lithologic and chemical differences. Rocks adjacent to the suture zone are characterized by high-grade metamorphism and much structural deformation. In addition, the zone was the locus of emplacement of plutons ranging in composition from tonalite to monzogranite during and after the final stages of accretion of the oceanic terrane to the North American continent. The contents of this paper consists of seven chapters.

Idaho, Oregon, Washington

Physiography, geology, and land cover of four watersheds in eastern Puerto Rico: Chapter A in Water quality and landscape processes of four watersheds in eastern Puerto Rico

Four watersheds with differing geology and land cover in eastern Puerto Rico have been studied on a long-term basis by the U.S. Geological Survey to evaluate water, energy, and biogeochemical budgets. These watersheds are typical of tropical, island-arc settings found in many parts of the world. Two watersheds are located on coarse-grained granitic rocks that weather to quartz- and clay-rich, sandy soils, and two are located on fine-grained volcanic rocks and volcaniclastic sedimentary rocks that weather to quartz-poor, fine-grained soils. For each bedrock type, one watershed is covered with mature forest, and the other watershed, like most of Puerto Rico, has transformed from relatively undisturbed pre-European forest to intensive agriculture in the 19th and early 20th centuries, and further to ongoing reforestation that began in the middle of the 20th century. The comparison of water chemistry and hydrology in these watersheds allows an evaluation of the effects of land-use history and geology on hydrologic regimes and erosion rates. This chapter describes the physiography, geology, and land cover of the four watersheds and provides background information for the remaining chapters in this volume.

Professional Paper

Geology of the Arabian Peninsula; shield area of western Saudi Arabia

Western Arabia lies within the low-latitude desert of north Africa and the Middle East, the core being the Arabian segment of the African Shield. The core of complex basement rocks accounts for about 670,000 km 2 , or one-third of the Arabian Peninsula. Reconnaissance mapping of these crystalline rocks, together with bordering sedimentary rocks and volcanic flows, begun in 1950, resulted during the next 13 years in a series of geologic and geographic maps without extensive texts. The maps served as general guides for development of natural resources, including water supplies, ore deposits, and building materials. An intensive exploration program that began in 1963 and involved numerous geologists has vastly increased geologic information. Rainfall in Arabia is meager and episodic, and vegetation is sparse except in isolated copses on the crest of the Hejaz Range. Comparison of flora with similar species in the Sudan, where records of rainfall have long been kept, allows evaluation of mean annual precipitation. Wandering bedouin following fodder created a delicate balance between population and water supply-now disturbed by wells drilled in alluvium and lava fields. A trapezoidal region of Precambrian crystalline rocks lies along the northeast flank of the Red Sea, with two long prongs extending northwest and southeast for a total of 1,800 km. These basement rocks of the Arabian Shield are well exposed on the uplands, scarp mountains, and coastal pediments where the Phanerozoic cover rocks have been stripped as a result of Paleozoic epeirogeny and Tertiary ramping. The shield outcrops are divided into three tectonic provinces by N. 45°W.- trending shear zones of the Najd fault system of latest Proterozoic and possibly earliest Paleozoic time. The southwestern province, the 'Asir1 upland, was sharply uplifted and tilted to the northeast during the Neogene. The northwestern province, consisting of the Ash Shifa'- Hisma upland as well as Jabal Shammar farther east, similarly was uplifted and tilted. These two provinces are separated by the flat-lying median N ajd province, which is chiefly bounded by the principal Najd faults. The outcrops of the shield rocks are of the Late Proterozoic Eonupper Riphean to Vendian or Infracambrian epochs, including the Ediacarian System. The most reliable isotopic ages range from about 900 to 560 m.y., but some Middle Proterozoic rocks may be present in the easternmost shield. The rocks are divided into six lithostratigraphic sequences, two plutonic suites, and an ophiolitic suite. The mafic and ultramafic volcanic and plutonic rocks of the ophiolitic suite everywhere were emplaced tectonically and are probably of different ages in different places. Some ophiolite occurs as obducted blocks, but most is highly deformed and altered to serpentinite in fault zones that mostly define sutures between different tectonic blocks or terranes within the shield. Three of the lithostratigraphic sequences consist of mafic to silicic volcanic rocks and volcanic-derived clastic rocks which, with their subvolcanic plutonic rocks of a dioritic suite, probably formed in oceanic island arcs during convergent plate tectonism. These rocks make up the primary, or first-formed, crust of the shield. Chemical analyses show that the primary shield rocks, regardless of age, are principally calc-alkalic with some associated tholeiitic varieties. Most of the layered rocks are andesitic, but they range from basalt to dacite and in places contain intercalated pillow basalt, marble, chert, and carbonaceous or graphitic schist. Most of the plutonic rocks of the dioritic suite are dioritic, but they range from gabbro to trondhjemite and rarely contain potassium feldspar. The sequences and an associated dioritic suite become younger toward the eastern shield, that is, the primary crust of the shield youngs toward the east. Two western sequences consist of the Jiddah (Samran) and BaishBahah Groups and range in radiometric age from about 900 to 800 m.y.; the eastern sequence consists of the Halaban (Hulayfah) Group and ranges from 800 to about 700 m.y. During subsequent orogeny, most of the rocks were intensely deformed and mostly metamorphosed to upper greenschist facies, but rising in places to the almandine-amphibolite facies. Two other lithostratigraphic sequences with an associated plutonic granitic suite are the products of two mountain-building episodes during which the primary crust was greatly thickened and converted into craton. The two sequences, including largely the Ablah (Al Ays) and Murdama (Shammar) Groups, consist of abundant sedimentary rocks, commonly arkosic, that are the erosional products of the orogenic mountains. They are several thousand meters thick. Less abundant calc-alkalic to alkalic volcanic rocks, commonly dacitic and rhyolitic, are intercalated with the sedimentary rocks. The plutonic rocks of the granitic suite in association with both sequences have syntectonic and posttectonic phases, are products of the orogenies, and are the principal new ingredients making up the craton. Gneiss domes were a significant part of these cratonization orogenies. In association with orogenic crustal heating, some of the low-density, more silicic tonalitic and trondhjemitic rocks of the primary crust rose as gneiss domes. Partial melting in the middle or lower crust below the gneiss domes produced large volumes of granitic magma that intruded the gneiss domes as granodioritic batholiths. The Ablah Group and the older part of the granitic suite are about 775 to 740 Ma old and are associated with the Ablah orogeny and early cratonization in the western and earlier formed half of the shield. The Murdama (Shammar) Group and the younger part of the granitic suite are about 660 to 580 Ma old and are associated with the culminant orogeny and late cratonization that was shieldwide. The granitic suite during both orogenies consists of early, syntectonic granodiorite batholiths associated with the gneiss domes and late, posttectonic monzogranite plutons. Only during the culminant orogeny, late magmatic evolution produced syenogranite and alkali-feldspar granite commonly in circular and ring-structured plutons and with associated explosive volcanic deposits (Shammar Group); final products, some of which have economic potential, were peralkalic and peraluminous. The late plutonism of the culminant orogeny was distinctly bimodal in that subordinate gabbroic rocks are associated with the granites. Various building blocks or terranes of the andesitic and dioritic primary crust were collisionally agglomerated during the Ablah orogeny, early cratonization, whereas the entire shield as currently exposed was further collisionally accreted and compressionally consolidated during the culminant orogeny, final cratonization. Thousands of kilometers of oceanic crust had to be subducted in about 300 m.y. to form the large primary crust of the Arabian Shield. The inevitable collisional events during consumption of such a large volume of oceanic crust invariably led to numerous collisional orogenies that collectively encompass the widely known Pan African tectonic episode. The youngest lithostratigraphic sequence, the Jubaylah Group, is essentially postcratonic, although it is the end product of the collisional culminant orogeny. Final east-west compression of the entire shield from about 580 to 560 m.y. caused the craton to fracture along the large northwest-trending, left-lateral faults and elsewhere along lesser, northeast-trending, right-lateral, conjugate faults of the N ajd fault system. Erosional products of this more localized deformation were the sedimentary rocks of the Jubaylah Group, which also includes intercalated andesitic to basaltic volcanic rocks of a mafic alkalic compositional trend. The collisional edge of an old continental plate (or tectonic fragments thereof), suspected on the eastern edge of the Arabian Shield, has not been shown with certainty to be exposed. Presumably, widespread contamination from such an old continental crust affects U/Pb, Sm/Nd, Rb/Sr, and common lead ratios in the young plutonic rocks of the easternmost shield. One mass of anorthosite near Jabal Khida' on the central eastern edge of the shield may be a fragment of this old continental plate in that associated granodiorite may be as old as 1,600 to 1,800 Ma. Epeirogenic uplift, erosion, and cooling of the uppermost shield during Early and Middle Cambrian time is indicated by an average fission track age of 510±52 m.y., on sphene from diorite (hornblende K-Ar age of 615±12 m.y.) in the southwestern part of the shield. The hiatus was followed by extensive deposition of the Cambro-Ordovician Saq Sandstone in the north and northeast and the Wajid Sandstone in the southeast and south of the shield. The Cambrian Siq Sandstone had already been deposited in the northern part. During the middle and late Paleozoic, broad epeirogeny caused further erosion of the shield until marine transgression deposited the Upper Permian Khuff Formation at least in the eastern part of the shield. In the southwestern shield, the nonmarine Upper Triassic Khums Sandstone was deposited variably on Wajid or Precambrian rocks and is overlain by limestone of the middle Upper Jurassic Amran Formation. Except for shallow marine sandstone of problematic Cretaceous age deposited on the Amran Formation in the south.western shield and on Precambrian rocks in the northwestern shield, the younger beds on the shield are Paleocene and younger, with the possibility that the lowermost are upper Maestrichtian. The early Tertiary beds contain vertebrate fossils of coastal marine or estuarine environment 250 km east of the Red Sea in the central shield. Marginal marine sediments were deposited in a western tongue of the latest Tethys Sea as late as Eocene on the western shield and at least as far south as Jiddah. The great harrats of flood basalt erupted on th~ western shield during late Oligocene and early Miocene at the same time a 2,000-kmlong continental rift valley developed along the future Red Sea axis. Within this rift valley, Baid freshwater tuffaceous lakebeds were deposited between mafic and silicic volcanoes. During late early Miocene time, the Red Sea opened at a rate of 4.4 cm/yr in a firststage movement while continental dikes and swarms of oceanic tholeiitic dikes, gabbro, and granophyre plutonic rocks were intruded into the rift sedimentary and volcanic rocks at the newly formed continental margin. The continental margin was deformed and greatly extended at this time. About 14 or 15 m.y., as the first-stage spreading stopped, the Red Sea Escarpment rose; its erosion caused deposition of coarse conglomerate of the Bathan Formation. About 3,000 m of evaporite was deposited on the young Red Sea oceanic crust during the late Miocene desiccation crisis. A second stage of sea-floor spreading about 4-5 m.y. produced the Red Sea axial trough, consisting of oceanic crust, as well as renewed uplift and tilting of the three tectonic provinces in response to compression from counterclockwise rotation against the Dead Sea Rift. This late movement caused widespread major stream capture, especially along the wadis that formerly drained southwesterly or northwesterly, the channels turning westward through narrow gorges to the coastal plain and the Red Sea.

Professional Paper

Volcanogenic massive sulfide occurrence model

Volcanogenic massive sulfide deposits, also known as volcanic-hosted massive sulfide, volcanic-associated massive sulfide, or seafloor massive sulfide deposits, are important sources of copper, zinc, lead, gold, and silver (Cu, Zn, Pb, Au, and Ag). These deposits form at or near the seafloor where circulating hydrothermal fluids driven by magmatic heat are quenched through mixing with bottom waters or porewaters in near-seafloor lithologies. Massive sulfide lenses vary widely in shape and size and may be podlike or sheetlike. They are generally stratiform and may occur as multiple lenses. Volcanogenic massive sulfide deposits range in size from small pods of less than a ton (which are commonly scattered through prospective terrains) to supergiant accumulations like Rio Tinto (Spain), 1.5 billion metric tons; Kholodrina (Russia), 300 million metric tons; Windy Craggy (Canada), 300 million metric tons; Brunswick No. 12 (Canada), 230 million metric tons; and Ducktown (United States), 163 million metric tons. Volcanogenic massive sulfide deposits range in age from 3.55 billion years to zero-age deposits that are actively forming in extensional settings on the seafloor, especially mid-ocean ridges, island arcs, and back-arc spreading basins. The widespread recognition of modern seafloor Volcanogenic massive sulfide deposits and associated hydrothermal vent fluids and vent fauna has been one of the most astonishing discoveries in the last 50 years, and seafloor exploration and scientific studies have contributed much to our understanding of ore-forming processes and the tectonic framework for volcanogenic massive sulfide deposits in the marine environment. Massive ore in volcanogenic massive sulfide deposits consists of greater than 40 percent sulfides, usually pyrite, pyrrhotite, chalcopyrite, sphalerite, and galena; non-sulfide gangue typically consists of quartz, barite, anhydrite, iron oxides, chlorite, sericite, talc, and their metamorphosed equivalents. Ore composition may be Pb-Zn-, Cu-Zn-, or Pb-Cu-Zn-dominated, and some deposits are zoned vertically and laterally. Many deposits have stringer or feeder zones beneath the massive zone that consist of crosscutting veins and veinlets of sulfides in a matrix of pervasively altered host rock and gangue. Alteration zonation in the host rocks surrounding the deposits are usually well-developed and include advanced argillic (kaolinite, alunite), argillic (illite, sericite), sericitic (sericite, quartz), chloritic (chlorite, quartz), and propylitic (carbonate, epidote, chlorite) types. An unusual feature of VMS deposits is the common association of stratiform "exhalative" deposits precipitated from hydrothermal fluids emanating into bottom waters. These deposits may extend well beyond the margins of massive sulfide and are typically composed of silica, iron, and manganese oxides, carbonates, sulfates, sulfides, and tourmaline.

Scientific Investigations Report

Porphyry copper assessment of the Central Asian Orogenic Belt and eastern Tethysides: China, Mongolia, Russia, Pakistan, Kazakhstan, Tajikistan, and India: Chapter X in Global mineral resource assessment

The U.S. Geological Survey collaborated with international colleagues to assess undiscovered resources in porphyry copper deposits in the Central Asian Orogenic Belt and eastern Tethysides. These areas host 20 known porphyry copper deposits, including the world class Oyu Tolgoi deposit in Mongolia that was discovered in the late 1990s. The study area covers major parts of the world’s largest orogenic systems. The Central Asian Orogenic Belt is a collage of amalgamated Precambrian through Mesozoic terranes that extends from the Ural Mountains in the west nearly to the Pacific Coast of Asia in the east and records the evolution and final closure of the Paleo-Asian Ocean in Permian time. The eastern Tethysides, the orogenic belt to the south of the Central Asian Orogenic Belt, records the evolution of another ancient ocean system, the Tethys Ocean. The evolution of these orogenic belts involved magmatism associated with a variety of geologic settings appropriate for formation of porphyry copper deposits, including subduction-related island arcs, continental arcs, and collisional and postconvergent settings. The original settings are difficult to trace because the arcs have been complexly deformed and dismembered by younger tectonic events. Twelve mineral resource assessment tracts were delineated to be permissive for the occurrence of porphyry copper deposits based on mapped and inferred subsurface distributions of igneous rocks of specific age ranges and compositions. These include (1) nine Paleozoic tracts in the Central Asian Orogenic Belt, which range in area from about 60,000 to 800,000 square kilometers (km 2 ); (2) a complex area of about 400,000 km 2 on the northern margin of the Tethysides, the Qinling-Dabie tract, which spans central China and areas to the west, encompassing Paleozoic through Triassic igneous rocks that formed in diverse settings; and (3) assemblages of late Paleozoic and Mesozoic rocks that define two other tracts in the Tethysides, the 100,000 km 2 Jinsajiang tract and the 300,000 km 2 Tethyan-Gangdese tract. Assessment participants evaluated applicable grade and tonnage models and estimated numbers of undiscovered deposits at different confidence levels for each permissive tract. The estimates were then combined with the selected grade and tonnage models using Monte Carlo simulations to generate probabilistic estimates of undiscovered resources. Additional resources in extensions of deposits with identified resources were not specifically evaluated. Assessment results, presented in tables and graphs, show amounts of metal and rock in undiscovered deposits at selected quantile levels of probability (0.95, 0.9, 0.5, 0.1, and 0.05 confidence levels), as well as the arithmetic mean and associated standard deviations and variances for each tract. This assessment estimated a total of 97 undiscovered porphyry copper deposits within the assessed permissive tracts. This represents nearly five times the 20 known deposits. Predicted mean resources that could be associated with these undiscovered deposits are about 370,000,000 metric tons (t) of copper, 10,000 t of gold, 7,700,000 t of molybdenum, and 120,000 t of silver. The assessment area is estimated to contain about five times as much copper in undiscovered deposits as has been identified to date. This report includes a summary of the data used in the assessment, a brief overview of the geologic framework of the area, descriptions of permissive tracts and known deposits, maps, and tables. A geographic information system database that accompanies this report includes the tract boundaries and known porphyry copper deposits, significant prospects, and prospects. Assessments of overlapping younger rocks and adjacent areas are included in separate reports available on-line at http://minerals.usgs.gov/global/ .

Scientific Investigations Report

The 2014 eruptions of Pavlof Volcano, Alaska

Pavlof Volcano is one of the most frequently active volcanoes in the Aleutian Island arc, having erupted more than 40 times since observations were first recorded in the early 1800s . The volcano is located on the Alaska Peninsula (lat 55.4173° N, long 161.8937° W), near Izembek National Wildlife Refuge. The towns and villages closest to the volcano are Cold Bay, Nelson Lagoon, Sand Point, and King Cove, which are all within 90 kilometers (km) of the volcano (fig. 1). Pavlof is a symmetrically shaped stratocone that is 2,518 meters (m) high, and has about 2,300 m of relief. The volcano supports a cover of glacial ice and perennial snow roughly 2 to 4 cubic kilometers (km 3 ) in volume, which is mantled by variable amounts of tephra fall, rockfall debris, and pyroclastic-flow deposits produced during historical eruptions. Typical Pavlof eruptions are characterized by moderate amounts of ash emission, lava fountaining, spatter-fed lava flows, explosions, and the accumulation of unstable mounds of spatter on the upper flanks of the volcano. The accumulation and subsequent collapse of spatter piles on the upper flanks of the volcano creates hot granular avalanches, which erode and melt snow and ice, and thereby generate watery debris-flow and hyperconcentrated-flow lahars. Seismic instruments were first installed on Pavlof Volcano in the early 1970s, and since then eruptive episodes have been better characterized and specific processes have been documented with greater certainty. The application of remote sensing techniques, including the use of infrasound data, has also aided the study of more recent eruptions. Although Pavlof Volcano is located in a remote part of Alaska, it is visible from Cold Bay, Sand Point, and Nelson Lagoon, making distal observations of eruptive activity possible, weather permitting. A busy air-travel corridor that is utilized by a numerous transcontinental and regional air carriers passes near Pavlof Volcano. The frequency of air travel across the region results in a relatively large number of airborne observations of eruptive activity. During the 2014 Pavlof eruptions, the Alaska Volcano Observatory received observations and photographs from pilots and local observers, which aided evaluation of the eruptive activity and the areas affected by eruptive products. This report outlines the chronology of events associated with the 2014 eruptive activity at Pavlof Volcano, provides documentation of the style and character of the eruptive episodes, and reports briefly on the eruptive products and impacts. The principal observations are described and portrayed on maps and photographs, and the 2014 eruptive activity is compared to historical eruptions.

Alaska

Numerical simulation of tsunami generation by pryoclastic flow at Aniakchak Volcano, Alaska

Pyroclastic flows entering the sea are plausible mechanisms for tsunami generation at volcanic island arcs worldwide. We evaluate tsunami generation by pyroclastic flow using an example from Aniakchak volcano in Alaska where evidence for tsunami inundation coincident with a major, caldera-forming eruption of the volcano ca. 3.5 ka has been described. Using a numerical model, we simulate the tsunami and compare the results to field estimates of tsunami run up.

Geophysical Research Letters

Late paleozoic base and precious metal deposits, East Tianshan, Xinjiang, China: Characteristics and geodynamic setting

The East Tianshan is a remote Gobi area located in eastern Xinjiang, northwestern China. In the past several years, a number of gold, porphyry copper, and Fe(-Cu) and Cu-Ag-Pb-Zn skarn deposits have been discovered there and are attracting exploration interest. The East Tianshan is located between the Junggar block to the north and early Paleozoic terranes of the Middle Tianshan to the south. It is part of a Hercynian orogen with three distinct E-W-trending tectonic belts: the Devonian-Early Carboniferous Tousuquan-Dananhu island arc on the north and the Carboniferous Aqishan - Yamansu rift basin to the south, which are separated by rocks of the Kanggurtag shear zone. The porphyry deposits, dated at 322 Ma, are related to the late evolutionary stages of a subduction-related oceanic or continental margin arc. In contrast, the skarn, gold, and magmatic Ni-Cu deposits are associated with post-collisional tectonics at ca. 290-270 Ma. These Late Carboniferous - Early Permian deposits are associated with large-scale emplacement and eruption of magmas possibly caused by lithosphere delamination and rifting within the East Tianshan.

Episodes

Major chemical characteristics of Mesozoic Coast Range ophiolite in California

Sixty-four major element analyses of rocks representative of the Coast Range ophiolite in California were compared with analyses of other onland ophiolite sequences and those of rocks from oceanic ridges. The rocks can be classed in five groups harzburgite-dunite, clinopyroxenite-wehrlite, gabbro, basalt-spilite, and keratophyre-quartz keratophyre which on various diagrams occupy nonoverlapping fields. The harzburgite-dunite from onland ophiolite and ocean ridges are comparable and very low in alkalies. Possible differentiation trends defined on AFM diagrams by other rocks from onland ophiolites and ocean ridges suggest two lines of descent: (1) A trend much like the calc-alkalic trend, though shifted somewhat toward higher iron, and (2) an iron-enrichment trend defined chiefly by the more iron-rich gabbros and amphibolite. MgO-variation diagrams for rocks from the Coast Range ophiolite further distinguish the iron-rich gabbros and amphibolite from the other rock groups and indicate that the iron enrichment, unlike that of the Skaergaard trend, is related to the formation of amphibole. Ophiolite sequences that include the most silicic rock types, such as quartz keratophyre, also exhibit the most pronounced dual lines of descent, suggesting that the silicic rocks and the amphibole-rich gabbros are somehow related. Although the major element chemistry of the Coast Range ophiolite is clearly like that of rocks dredged from oceanic ridges, it is not sufficiently diagnostic to discriminate among the choices of a spreading ridge, an interarc basin, or perhaps even the root zone of an island arc as the site of ophiolite formation.

California