Search USGSSearch

USGS · wsp217

Water resources of Beaver Valley, Utah

Abstract

Location and extent of area examined. Beaver Valley is located in Beaver County, in southwestern Utah, about 175 miles south of Salt Lake. It lies between the Tushar Mountains on the east and the Beaver Mountains on the west. The principal town of the valley is Beaver, which is most conveniently reached from Milford, a station on the San Pedro, Los Angeles and Salt Lake Railroad. The valley, together with its neighboring highlands, occupies the eastern third of Beaver County, an area of about 1,200 square miles. A large part of this area, however, is rocky upland and unproductive desert, the tillable land comprising a comparatively small area in the immediate vicinity of the streams. Purpose and scope of work . The purpose of this paper is to present information concerning the waters of Beaver Valley and to point out ways and means of increasing their usefulness. The presence of a large amount of water in Beaver Valley results from local topograhic conditions, the water being supplied by precipitation in the highland to the east. Its conservation and distribution result from geologic conditions, the water being held in loose gravel and sand, which are more or less confined between ridges of consolidated rocks. The rock basins were formed partly by erosion and partly by faulting and surface deformation. In order to accomplish the purpose in view it is therefore necessary to describe the geographic and geologic conditions in Beaver Valley and neighboring regions. The investigation included the determination of the flow of streams and springs, of the manner of occurrence and quantity of the underground waters as shown by the geologic and geographic conditions of the region and by the distribution of springs and wells, and of the chemical character of the waters with reference to their adaptability to domestic use and to irrigation. The chemical data were obtained (a) by field assays, which are approximately correct and probably of sufficient accuracy to be of value in comparing the various waters; (b) by more exact analyses, some of which were made in the laboratory of the United States Geological Survey by W. M. Barr, and others by Herman Harms, State chemist of Utah, for the San Pedro, Los Angeles and Salt Lake Railroad; and (c) by sanitary analyses, made also by Herman Harms. Cooperation . The work was done during the summer of 1906, the United States Geological Survey cooperating with the State of Utah through Caleb Tanner, State engineer, and with the county of Beaver through the supervisors of the county. In collecting the information the writer was assisted by J. F. Hoyt, of Nephi, Utah.

Explore related subjects

90° N90° S · 180° W ← longitude → 180° E
Source-reported bounding extent: 38.06539235133249° to 38.68014968334624° latitude; -113.13034057617188° to -112.39837646484375° longitude. This indicates report coverage, not an exact sampling location. View area on OpenStreetMap.

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Willis Thomas Lee. 1908. Water resources of Beaver Valley, Utah. https://doi.org/10.3133/wsp217

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related USGS reports

Basic ground-water hydrology

Ground water is one of the Nation's most valuable natural resources. It is the source of about 40 percent of the water used for all purposes exclusive of hydropower generation and electric powerplant cooling. Surprisingly, for a resource that is so widely used and so important to the health and to the economy of the country, the occurrence of ground water is not only poorly understood but is also, in fact, the subject of many widespread misconceptions. Common misconceptions include the belief that ground water occurs in underground rivers resembling surface streams whose presence can be detected by certain individuals. These misconceptions and others have hampered the development and conservation of ground water and have adversely affected the protection of its quality. In order for the Nation to receive maximum benefit from its ground-water resource, it is essential that everyone, from the rural homeowner to managers of industrial and municipal water supplies to heads of Federal and State water-regulatory agencies, become more knowledgeable about the occurrence, development, and protection of ground water. This report has been prepared to help meet the needs of these groups, as well as the needs of hydrologists, well drillers, and others engaged in the study and development of ground-water supplies. It consists of 45 sections on the basic elements of ground-water hydrology, arranged in order from the most basic aspects of the subject through a discussion of the methods used to determine the yield of aquifers to a discussion of common problems encountered in the operation of ground-water supplies. Each section consists of a brief text and one or more drawings or maps that illustrate the main points covered in the text. Because the text is, in effect, an expanded discussion of the illustrations, most of the illustrations are not captioned. However, where more than one drawing is included in a section, each drawing is assigned a number, given in parentheses, and these numbers are inserted at places in the text where the reader should refer to the drawing. In accordance with U.S. Geological Survey policy to encourage the use of metric units, these units are used in most sections. In the sections dealing with the analysis of aquifer (pumping) test data, equations are given in both consistent units and in the inconsistent inch-pound units still in relatively common use among ground-water hydrologists and well drillers. As an aid to those who are not familiar with metric units and with the conversion of ground-water hydraulic units from inch-pound units to metric units, conversion tables are given on the inside back cover. Definitions of ground-water terms are given where the terms are first introduced. Because some of these terms will be new to many readers, abbreviated definitions are also given on the inside front cover for convenient reference by those who wish to review the definitions from time to time as they read the text. Finally, for those who need to review some of the simple mathematical operations that are used in ground-water hydrology, a section on numbers, equations, and conversions is included at the end of the text.

Water Supply Paper

Validation of a numerical modeling method for simulating rainfall-runoff relations for headwater basins in western King and Snohomish Counties, Washington

The validity of a previously determined numerical modeling method was assessed. Numerical models for 11 drainage basins were constructed with the Hydrologic Simulation Program-FORTRAN (HSPF) with parameter values that were generalized for the physiographic region. Large and recurrent simulation errors were initially identified, but three systematic modifications of the models corrected those errors for 10 out of the 11 basins. The validity of the numerical modeling method for simulating rainfall-runoff relations in the study area, as modified during this investigation, was not rejected, but observed streamflow data were needed to apply the method.

Water Supply Paper

Sediment-quality assessment of Franklin D. Roosevelt Lake and the upstream reach of the Columbia River, Washington, 1992

Elevated concentrations of trace elements were found in bed sediment of Lake Roosevelt and the Columbia River, its principal source of inflow. Trace-element concentrations in whole water samples did not exceed criteria for freshwater organisms. Bed sediments of Lake Roosevelt were analyzed for organic compounds associated with wood-pulp waste. Dioxins and furans were found in suspended sediment and water of the Columbia River. Abundance and diversity of benthic invertebrate communities were analyzed.

Water Supply Paper