Search USGS⌕ Search
Home/Archive/USGS

USGS · wsp1819B

Predicted hydrologic effects of pumping from the Lichterman Well Field in the Memphis Area, Tennessee

Dale J. Nyman
View original source ↗Read source document ↗Export metadata ↓

Abstract

The Lichterman well field is scheduled to go into operation early in 1965 to supplement the municipal water-supply system for the city of Memphis, Tenn. Although the initial rate of withdrawal from the well field will be about 8 mgd (million gallons per day), the ultimate design capacity of the field is 20 mgd. A study of sand samples, drillers' logs, and geophysical logs collected during preliminary test drilling at the site for the Lichterman well field was used as a basis for defining three zones of sand favorable for the construction of high-capacity (1,000 gallons per minute or more) water wells. The three zones occur in the '500-foot' sand and are here designated (in descending order) as zone A, zone B, and zone C. The depth to the top of these zones below land surface has the following ranges: zone A, 125 to 225 feet; zone B, 200 to 350 feet; and zone C, 700 to 775 feet. Zones A and B range from 0 to 100 feet in thickness, and zone C ranges from 10 to 100 feet in thickness. Within the well field proper these zones are expected to react to the stress of pumping as separate hydrologic units, but outside the well field the three zones are expected to react as a single hydrologic unit. The '500-foot' sand in the Germantown-Collierville area is recharged chiefly by precipitation on the outcrop area of the sand to the east, but the evidence indicates that additional recharge is entering the aquifer from the Wolf River. In spite of this additional recharge, water levels in the '500-foot' sand are declining at an average rate of about two-thirds of a foot per year, owing to municipal and industrial pumpage in the Memphis area. However, this decline is not expected to alter the excellent quality of the water in the '500-foot' sand at the site of the Lichterman well field. Pumping in the Lichterman well field will create a cone of depression in the free-water (piezometric) surface of the '500-foot' sand. The decline in water levels will be directly proportional to the rate of pumping and inversely proportional to the distance from the well field. The resultant changes in hydraulic gradients will alter the direction of ground-water movement in the vicinity of the well field and increase the rate of movement toward the well field from areas of recharge. The lowering of water levels might also accelerate locally the changeover from artesian conditions to semiartesian or water-table conditions in the '500-foot' sand. Within the well field proper, water levels are expected to fluctuate as individual wells are turned on and off to accommodate the demand for water. The presence of clay beds in the aquifer will tend to limit the specific capacity of individual production wells, but could serve to limit interference between wells if adjacent wells are screened in different sections of the aquifer. Interference between wells might also be lessened by pumping those wells having the highest specific capacities for the longest periods of time.

Explore related subjects

Water Supply PaperReport

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Dale J. Nyman. 1965. Predicted hydrologic effects of pumping from the Lichterman Well Field in the Memphis Area, Tennessee. https://doi.org/10.3133/wsp1819b

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related USGS reports

USGS2004

Basic ground-water hydrology

Ground water is one of the Nation's most valuable natural resources. It is the source of about 40 percent of the water used for all purposes exclusive of hydropower generation and electric powerplant cooling. Surprisingly, for a resource that is so widely used and so important to the health and to the economy of the country, the occurrence of ground water is not only poorly understood but is also, in fact, the subject of many widespread misconceptions. Common misconceptions include the belief that ground water occurs in underground rivers resembling surface streams whose presence can be detected by certain individuals. These misconceptions and others have hampered the development and conservation of ground water and have adversely affected the protection of its quality. In order for the Nation to receive maximum benefit from its ground-water resource, it is essential that everyone, from the rural homeowner to managers of industrial and municipal water supplies to heads of Federal and State water-regulatory agencies, become more knowledgeable about the occurrence, development, and protection of ground water. This report has been prepared to help meet the needs of these groups, as well as the needs of hydrologists, well drillers, and others engaged in the study and development of ground-water supplies. It consists of 45 sections on the basic elements of ground-water hydrology, arranged in order from the most basic aspects of the subject through a discussion of the methods used to determine the yield of aquifers to a discussion of common problems encountered in the operation of ground-water supplies. Each section consists of a brief text and one or more drawings or maps that illustrate the main points covered in the text. Because the text is, in effect, an expanded discussion of the illustrations, most of the illustrations are not captioned. However, where more than one drawing is included in a section, each drawing is assigned a number, given in parentheses, and these numbers are inserted at places in the text where the reader should refer to the drawing. In accordance with U.S. Geological Survey policy to encourage the use of metric units, these units are used in most sections. In the sections dealing with the analysis of aquifer (pumping) test data, equations are given in both consistent units and in the inconsistent inch-pound units still in relatively common use among ground-water hydrologists and well drillers. As an aid to those who are not familiar with metric units and with the conversion of ground-water hydraulic units from inch-pound units to metric units, conversion tables are given on the inside back cover. Definitions of ground-water terms are given where the terms are first introduced. Because some of these terms will be new to many readers, abbreviated definitions are also given on the inside front cover for convenient reference by those who wish to review the definitions from time to time as they read the text. Finally, for those who need to review some of the simple mathematical operations that are used in ground-water hydrology, a section on numbers, equations, and conversions is included at the end of the text.

Water Supply Paper↗
USGS2002

Use of stable isotopes of carbon, nitrogen, and sulfur to identify sources of nitrogen in surface waters in the Lower Susquehanna River Basin, Pennsylvania

Samples of nitrogen-source material, soil, and water were collected from several small, primarily single-source subbasins in the Lower Susquehanna River Basin during 1988–90 to determine the feasibility of using measurements of stable isotope ratios of carbon ( 13 C), nitrogen ( 15 N), and sulfur ( 34 S) to identify sources of nitrogen (N) in stream water. Chemical and isotopic compositions were measured for six N-source types consisting of rain water, forest leaf litter, synthetic fertilizer, farm-animal manure, municipal-sewage effluent and sludge, and septictank effluent and sludge. Compositions of associated, nearby samples of topsoil, subsoil, runoff water, and stream water were measured to evaluate changes in compositions of transported N-containing materials near the N source. Animal manure, human waste (sewage plus septic), and forest-leaf litter can be distinguished on the basis of 13 C; however, most N-sources cannot be distinguished on the basis of 15 N and 34 S, owing to wide ranges and overlap of compositions among different N-source types. Although values of 15 N for soil and runoff-water samples are qualitatively similar to those of the applied N source, values of 13 C and 34 S for runoff-water and stream-water samples appear to reflect the compositions of relatively large reservoirs of the elements in soil organic matter and minerals, respectively, and not the composition of the applied N source. The ratio of organic carbon to total nitrogen (C-org:N), combined with 13 C, is useful for distinguishing agricultural soils, which have characteristically high 13 C and low C-org:N, from forested soils. The C-org:N values of suspended particulates in runoff or stream waters generally are lower than those of nearby soils, however, and indicate that chemical transformations and resultant isotopic fractionation can be important controls on the compositions of N-containing compounds in the soil and water. In aqueous samples including surface water and liquid N-sources, isotopic ratios commonly differ between coexisting dissolved fractions of NO 3- N and NH 3- N and between dissolved and particulate fractions of N or S, probably because of isotopic fractionation during transport or N-source processing. Isotopic measurements provide qualitative information about important reactions that can affect N concentrations in surface waters. However, mass-balance computations generally are not sufficiently accurate to estimate the proportions of multiple sources contributing to the N load in the streams studied because of (1) variations in source chemical and isotopic compositions and (2) nonconservative behavior and fractionation during transport over short distances (hundreds of meters). Uncertainties in mass-balance computations are complicated by the propagation of errors associated with measurements of discharge, chemical concentrations,and isotopic compositions of relatively dilute, small streams.

Pennsylvania↗
USGS2001

Validation of a numerical modeling method for simulating rainfall-runoff relations for headwater basins in western King and Snohomish Counties, Washington

The validity of a previously determined numerical modeling method was assessed. Numerical models for 11 drainage basins were constructed with the Hydrologic Simulation Program-FORTRAN (HSPF) with parameter values that were generalized for the physiographic region. Large and recurrent simulation errors were initially identified, but three systematic modifications of the models corrected those errors for 10 out of the 11 basins. The validity of the numerical modeling method for simulating rainfall-runoff relations in the study area, as modified during this investigation, was not rejected, but observed streamflow data were needed to apply the method.

Water Supply Paper↗